1. Tugimun Nail
Contact Info
Address : No;29/1,Jalan Syed Mashor,
Kuala Kubu Bahru,
44000 Selangor, Malaysia.
Mobile No. : 012-3998917
Email : tg206868@gmail.com , tugimun@epmb.com.my
Personal Particulars
Age : 47 years
Date of Birth : 6 Jan 1968
Nationality : Malaysia
Gender : Male
Marital Status : Married
IC No. : 680106-10-5743
Permanent Residence : Malaysia
Educational Background
Bachelor's Degree
Field of Study : Engineering (Electrical/Electronic)
Institute/University : Saga University,Kyushu,JAPAN.
Grade : Pass/Non-gradable
Graduation Date : Mar 1992
Employment History
Summary;
Total Working Experience:1992-2014 (23 years).
Working experience in Automotive(Plastic & Metal) Industries: 16 years.
Working experience in Semiconductor/Electronics Industries: 7 years.
Working experience as a Management level: 19 years.
Total Working Experience in Quality Department: 22 years.
Total Working Experience in Production Department: 2 years.
2. EPMB GROUP.(EP Polymers (M) Sdn Bhd. & PEPS-JV (M) Sdn Bhd.)
Position/Role : Deputy General Manager (Quality)
Specialization : Quality Management System/Quality Management Representative(QMR)
Industry : Manufacturing / Production-Automotive.
Duration : Feb 2008 – Present (7 years).
Responsibility/Work Description:
1-Managing QA Department with about total 120 staff(20 engineers and executives) for,
a)Quality Management System(QMS)-ISO/TS16949 System,Internal and External Audit.
b)Quality Assurance(QA)-Supplier Quality Assurance(SQA), Warranty and Services,
Calibration & Testing Laboratory(establishing Testing Lab facilities and capabilities
with suitable testing,endurance and reliability equipments), Quality Representative
Engineering(QRE),etc.
c)Quality Control(QC)-Manufacturing Quality Control(MQC),Final Quality
Control(Quality Gate), Part Accuracy System, Customer Representative &
Complaint(CR), etc
2-Quality Management Representative (QMR) for Automotive Quality System ISO/TS
16949; 2003.
Succesfully to obtain TS 16949 certification on Jan 2010 (for EP Polymers Sdn Bhd),
and maintaining the same certificate for PEPS-JV (M) Sdn Bhd.
3-Established company’s SAFETY Committee Team and as a committee.
4-Developing people for future company expension.(Almost of my QAQC experience
staff are leading others department in PEPS-JV (M) Sdn Bhd.This is one of my success
story in this company which other Department doesn’t have)
5a)EP Polymers Sdn Bhd.
Assist Senior General Manager in daily operation and new project set-up (Alternator
and Starter Motor-Automotive with Technical Partner-Robert Bosch).Plastic injection
moulding of Smart Water Meter Case (Water Industry).
5b)PEPS-JV (M) Sdn Bhd.
i)Assist General Manager in daily operation,new project setup,customers complaint
issues, daily productivities/quality/delivery performances.
ii)Setup company policies related on HR/Quality/Production and others Operational
matter as Senior Management Committee.
6-Stabilize the Quality and Production of EP Polymers within 2 years.Then the top
management(directors) instructed me to handle anothers manufacturing/automotive
company under the same group.(Peps-JV Sdn Bhd-Metal Stamping).
7)To assist GM and Directors on daily operational matter,reporting,setting company
goal and strategies.
3. Raya Plastic Industry Sdn.Bhd.
Position/Role : Operation Manager.
Specialization : Manufacturing/Production Operations-Automotive
Duration : Oct 2007 – Feb 2008 (5 months).
Responsibilities/Work Description:
1-Managing manufacturing/operation department as
a)Production Planning/Logistic,
b)Production,
c)Maintenance,
d)Quality Control/Assurance,
e)Engineering/RND.
2-The company just bought over by new management team,and my responsibility to make
sure smooth operation from Production until delivery to customer with the minimum/limited
manpower and limited resources to make sure company can make profit as soon as posibble.
The most important things is to get back customer confident since before this,the company
was not perform well.
Now the company is one of main supplier/vendor to PROTON Berhad.
PEPS-JV (M)Sdn. Bhd.
Position/Role : Manager of QA/QC Dept.
Specialization : Quality Control/Assurance
Industry : Manufacturing/Production-Automotive
Duration : Oct 2006 - Sep 2007 (1 years)
Responsibility/Work Description:
1- Managing QA (Warranty Section,Supplier QA Section,Customer Services
Section,Reliability and Testing Section,Outgoing Section)and QC(Production
QC)which consist of 19 persons of engineers/execcutive and 100 staff.
2- (Peps-JV as the 2nd larger metal stamping company for Malaysia automotive industry
behind Proton Berhad).
3- To initiate company,QA departmental KAIZEN activity and re-activate the QCC
activity.
4- To monitor the process rejections,scrap and waste so that can trace the material
"loss".
5- To support production in term of quality improvement and problem solving.
6- Establish Calibration Room & facilities for internal/in-house calibration
capability.
4. AUTOVISOR Sdn Bhd./ BRIMAL HOLDING Sdn.Bhd.
Position/Role : HOD of Production & Maintenance Manager
Position Level : Manager
Specialization : Manufacturing/Production Operations
Industry : Manufacturing/Production-Automotive
Duration : Feb 2004 - Sep 2005 (2 years)
Responsibilities/Work Description:
1- Managing Production line of Automotive/Electronics Assembly line and Injection
Molding for both companies.
2- To assist and acting as Operation Manager for any issue as delivery,material or
quality matter at customer side.
3- Helping R&D for the new development product and Pre-Pro/Mass-Pro
arrangement.
4- To maintain all facilities in the factory and machineries in the production line.
Usra Indusries S/B
Position Title : Production manager
Position Level : Manager
Specialization : Manufacturing/Production Operations
Industry : Manufacturing / Production-Automotive
Duration : Jul 2002 - Jan 2004 (2 years)
Tamura Elecronics(M) S/B
Position Title : QA Manager
Position Level : Manager
Specialization : Quality Control/Assurance
Industry : Manufacturing / Production-Electronics
Duration : May 1999 - Jul 2002 (3 years)
Toshiba Electronics Malaysia Sdn Bhd.
Position Title : QA Engineer.
Position Level : Engineer.
Specialization : Quality Control/Assurance
Industry : Manufacturing / Production-Electronics
Duration : May 1992 - April 1997 (5 years).
5. Languages
(Proficiency: 0=Poor - 10=Excellent)
Language Spoken Written
Bahasa Malaysia/Indonesian 10/9 10/9
English 10 10
Japanese 10 9
Additional Info
Career Objective:Ultimate objective is to become the General Manager/COO or higher
position of a manufacturing company.
Any position I undertake before this would serve to increase my knowledge in running a
company.
Motto: 1-Work smart with Integrity and honesty.
2-Quality First,Customer First.
3-Developing People first before product.
Other Experiences summary:
2008- Current
EP Polymers (M) Sdn.Bhd.,Glenmarie,Shah Alam + Peps-JV (M) Sdn. Bhd.,Batangkali.
(EPMB GROUP)
QA Manager.
Injection Moulding-IAFM (New Product/Line) + Metal Stamping/Automotive.
2006-2007
Peps-JV (M) Sdn.Bhd.,Batangkali -(EPMB GROUP)
QA Manager.
Metal Stamping-Automotive parts.
2004-2005
Autovisor Plastic Sdn Bhd/Brimal Holding Sdn Bhd/Custom Tooling M'sia Sdn Bhd
-Production Manager/Maintenance Manager
-Assembly Line/Injection Moulding/Maintenance
2002-2004
Usra Industries Sdn.Bhd., Shah Alam
-Developed Headlining, Assy for Protons Waja model from prototype to Mass
Production.(Kenaf Composite Material).
-Currently developing Headlining, Assy for Protons WRM model from prototype to Pre-
production.
-Directly responsible for Machine/Mould/Jig "Buy-off" from Taiwan and installation into
factory
6. 2000 - 2002
Tamura Electronics (M) Sdn. Bhd., Petaling Jaya
QA Manager
-Developed and Monitored System of Local and Oversea Sub-Contractors
-Appointed as Deputy Quality Management Representative where position requires the
maintaining, monitoring and improvement of existing ISO 9002
for local as well as Myanmar factory
-Appointed as Deputy Environment Management Representative where position
required implementation and certification of ISO 14000 (2001) for
local as well as the Myanmar factory.
1992 - 1997
Toshiba Electronics Malaysia, Teluk Panglima Garang
QA Engineer
-Final Inspection
-Product Reliability test
-Customer Claims Reports
-Product Failure Analysis
-Final Inspection System
-Quality Control Circle-QCC Group Advisor
Courses Attended:
1)OSHA/ESH.
2)DFMEA,PFMEA,SPC.
3)Inventory Control Systems.
4)Continuous Improvement Process (KAIZEN),JIT System.
5)Motivation for Management.
6)EMS:ISO 14000/ISO 19000 and its requirement/elements.
7)ISO/TS 16949 and its requirement/elements and others related training.
8)Financial for Non Financial Manager.
9)HR related training/courses
10 Motivational course (Dr Lawrance Walter Ng).
And etc.
Organizations: Alumni of Look East Policy Society (ALEPS)
Availability :2 month(s)
Miscellaneous
Expected Monthly Salary : Subject to negotiation.
Willing to Travel : Yes
Willing to Relocate : Yes
Possess Own Transport : Yes
Others;
Expecting same or higher than current position.
7. References
Hong Sung Mun (Korean,USA Citizen)
Relationship : Superior.
Position : Senior General Manager,EPMB Bhd..
Tel : 019-6243915
Email : hsmilha@epmb.com.my
Murnisham Harun
Relationship : Superior.
Position : General Manager, Raya PlasticIindustries Sdn Bhd.
Tel : 012-3882146
Email : murnisham@yahoo.com
Shairul Baki
Relationship : Superior.(Ex-GM of PEPS-JV).
Position : Current; MD (Consultant of MAI-MITI).
Tel : 019-6691269
Email : bakims355@gmail.com