MYP –HSE-P5-WT-0044 - 14-10-2021.pptx
•Download as PPTX, PDF•
0 likes•1 view
The document summarizes a safety internal walkthrough of the King Salman International Complex for Marine Industries and Services Project. It notes observations made by the lead auditor and members, such as a diesel tank being uncovered, a worker using a substandard face shield, electric cables laying exposed on the ground without protection, and cables not being properly arranged. The rectifications made to address each observation are also documented, such as covering the diesel tank, replacing the face shield, protecting cables, arranging cables properly, and posting a head bump signage. The status of each observation is closed once rectified.
Report
Share
Report
Share
Recommended
D E Marsden - Marine CV
Dan E. Marsden is a British commercial air diver with over 10 years of experience in underwater inspection, maintenance, construction and salvage projects. He has worked on offshore wind farms, water infrastructure projects, and salvage operations. Marsden holds professional certifications in commercial diving, welding, first aid and offshore safety. He has experience managing diving teams and projects.
Gavin_Tran_CV
Gavin Tran has over 15 years of experience as a mechanical engineer, field service engineer, and commissioning engineer working with various companies like SPX Clyde Union Pumps, Weir Engineering Services, and BAE Systems. He has worked on major projects for companies in industries like oil and gas. His experience includes installing, maintaining, repairing, and commissioning various equipment globally, including in hazardous areas. He has a HNC in Mechanical Engineering and various safety and technical certifications.
Target committee review meeting
This document summarizes observations from safety inspections at a coal mine and the mine's compliance actions. Key points include:
- Regulatory violations were observed around dust suppression, roof support, air quality and training.
- The mine rectified issues such as improving water spraying, properly setting roof bolts and props, and providing training.
- Strata monitoring and airblast precautions were discussed following a cave-in event.
- Other areas of improvement involved maintenance of plans, electrical protection devices, and cable sealing.
- Compliance dates for corrective actions ranged from immediate to end of September 2015.
New CV Amended
This document is the CV of Albertus Thomas Combrink, which provides personal and professional details. It summarizes his qualifications including NEBOSH IGC, IMCA Diver Medical Technician, and Fast Recovery Craft Licence. It lists over 25 years of diving experience, including 10 years working in offshore oil and gas in construction roles. It details employment history with companies like Hydro-dive, ACE Diving, and Smit Terminals working on projects in Nigeria, Angola, South Africa, and other locations as a lead diver, deck foreman, and supervisor.
Ashram Ramesar Cv
Ashram Angelo Ramesar is seeking a position as an HSE Adviser or NACE Inspector. He has over 10 years of experience in HSE roles, working on various oil and gas projects in Trinidad. Ramesar has extensive safety training and certifications. He holds a BSc in Occupational Health, Safety and Environment and is a certified NACE Inspector.
RESUME IMCA AIR DIVING SUPERVISOR
Sherif Mohamed Abdel Kader is an Egyptian national who has worked as an IMCA Air Diving Supervisor since 2010. He has over 15 years of experience in commercial diving and has worked on numerous offshore oil and gas projects in Egypt, Saudi Arabia, India, and other countries. Some of his responsibilities have included underwater pipeline maintenance and repair, installation of structures and pipelines, inspection of offshore facilities, and supervising diving teams. He holds professional certifications in commercial diving, diving supervision, and health and safety training.
JHA06_Installation of Transversal beams in Flare Pipe Rack_Rev00.pdf
1. The document provides a job hazard analysis for the installation of transversal beams in a flare pipe rack, outlining 7 key steps of work: scaffolding erection, grinding existing beams, drilling holes, using a mobile elevated work platform, lifting and positioning beams, welding and grinding beam supports, and painting.
2. Hazards identified include falls, flying particles, dust inhalation, fire, electric shock, and injuries from lifting. Controls include fall protection, enclosed grinding, respiratory protection, hot work and electrical permits, inspections of lifting equipment, and delineation of work areas.
3. Emergency procedures are defined, and qualifications for first aid and treatment of injuries are provided. Personal protective equipment requirements
mh_saad_resume (2) - Copy
This document contains contact information and a resume for Mohamed Saad Abd El Sabour Ahmed Helaly. It lists his address, phone numbers, email, personal details such as nationality and date of birth, education history including graduating from Alexandria University's Faculty of Law in 2002, technical skills including Microsoft Office and various operating systems, and professional experience conducting subsea inspections for oil and gas companies from 2013 to 2015.
Recommended
D E Marsden - Marine CV
Dan E. Marsden is a British commercial air diver with over 10 years of experience in underwater inspection, maintenance, construction and salvage projects. He has worked on offshore wind farms, water infrastructure projects, and salvage operations. Marsden holds professional certifications in commercial diving, welding, first aid and offshore safety. He has experience managing diving teams and projects.
Gavin_Tran_CV
Gavin Tran has over 15 years of experience as a mechanical engineer, field service engineer, and commissioning engineer working with various companies like SPX Clyde Union Pumps, Weir Engineering Services, and BAE Systems. He has worked on major projects for companies in industries like oil and gas. His experience includes installing, maintaining, repairing, and commissioning various equipment globally, including in hazardous areas. He has a HNC in Mechanical Engineering and various safety and technical certifications.
Target committee review meeting
This document summarizes observations from safety inspections at a coal mine and the mine's compliance actions. Key points include:
- Regulatory violations were observed around dust suppression, roof support, air quality and training.
- The mine rectified issues such as improving water spraying, properly setting roof bolts and props, and providing training.
- Strata monitoring and airblast precautions were discussed following a cave-in event.
- Other areas of improvement involved maintenance of plans, electrical protection devices, and cable sealing.
- Compliance dates for corrective actions ranged from immediate to end of September 2015.
New CV Amended
This document is the CV of Albertus Thomas Combrink, which provides personal and professional details. It summarizes his qualifications including NEBOSH IGC, IMCA Diver Medical Technician, and Fast Recovery Craft Licence. It lists over 25 years of diving experience, including 10 years working in offshore oil and gas in construction roles. It details employment history with companies like Hydro-dive, ACE Diving, and Smit Terminals working on projects in Nigeria, Angola, South Africa, and other locations as a lead diver, deck foreman, and supervisor.
Ashram Ramesar Cv
Ashram Angelo Ramesar is seeking a position as an HSE Adviser or NACE Inspector. He has over 10 years of experience in HSE roles, working on various oil and gas projects in Trinidad. Ramesar has extensive safety training and certifications. He holds a BSc in Occupational Health, Safety and Environment and is a certified NACE Inspector.
RESUME IMCA AIR DIVING SUPERVISOR
Sherif Mohamed Abdel Kader is an Egyptian national who has worked as an IMCA Air Diving Supervisor since 2010. He has over 15 years of experience in commercial diving and has worked on numerous offshore oil and gas projects in Egypt, Saudi Arabia, India, and other countries. Some of his responsibilities have included underwater pipeline maintenance and repair, installation of structures and pipelines, inspection of offshore facilities, and supervising diving teams. He holds professional certifications in commercial diving, diving supervision, and health and safety training.
JHA06_Installation of Transversal beams in Flare Pipe Rack_Rev00.pdf
1. The document provides a job hazard analysis for the installation of transversal beams in a flare pipe rack, outlining 7 key steps of work: scaffolding erection, grinding existing beams, drilling holes, using a mobile elevated work platform, lifting and positioning beams, welding and grinding beam supports, and painting.
2. Hazards identified include falls, flying particles, dust inhalation, fire, electric shock, and injuries from lifting. Controls include fall protection, enclosed grinding, respiratory protection, hot work and electrical permits, inspections of lifting equipment, and delineation of work areas.
3. Emergency procedures are defined, and qualifications for first aid and treatment of injuries are provided. Personal protective equipment requirements
mh_saad_resume (2) - Copy
This document contains contact information and a resume for Mohamed Saad Abd El Sabour Ahmed Helaly. It lists his address, phone numbers, email, personal details such as nationality and date of birth, education history including graduating from Alexandria University's Faculty of Law in 2002, technical skills including Microsoft Office and various operating systems, and professional experience conducting subsea inspections for oil and gas companies from 2013 to 2015.
Suraksha Jagriti.pptx
The document provides an overview of BALCO's health, safety, and environment (HSE) training module. It discusses BALCO's vision of zero harm, HSE core values, safety definitions, incident classifications, risk assessment process, safety standards including work at heights and isolation procedures, and BALCO's safety rules. The training aims to educate employees on BALCO's safety policies and procedures to prevent incidents and achieve their goal of zero harm.
Ali Lamont 2.8MB CV&Certs 2015
Alistair Lamont has over 40 years of experience as a mixed gas diver and supervisor. He has worked on numerous offshore oil and gas projects worldwide since 1977. He holds several certifications including hyperbaric welding inspector, NDT inspector, and mixed gas supervisor. His most recent roles have included dive supervisor positions in Southeast Asia, the Middle East, and the North Sea working on manifold installations, pipeline repairs, and wellhead replacements.
Introduction 1
The document describes an inspection conducted on 12/4/2016 of MMHE West yard, the largest fabrication yard in Malaysia, which found that while most health and safety systems were in good condition, there were five critical hazards identified - including risks from machinery, noise exposure, chemical storage, heat exposure, and lack of PPE - that required immediate corrective action from management to ensure compliance with relevant laws.
Abfad Ltd General Services Presentation
Abfad Ltd have been established since 1996, offering industrial rope access solutions to a variety of industries, such as power generation, oil and gas, renewable, offshore, shipyards and more.
Along side rope access Abfad also provide specialist solvent free coatings and corrosion protection, including single and double skin storage tank lining with integrated leak detection monitoring and pipeline corrosion prevention and monitoring systems.
This is a company profile of Abfad Ltd and a general presentation of the services we can provide and some of the big projects we have worked on over the years.
Geo Therm Ltd - Company Profile Booklet
Geo Therm company profile booklet providing a basic overview on the company, its formation, personnel and services sectors to aid existing maintenance regimes, condition monitoring for industry offshore, maritime and energy sector compliance needs.
ReyfernandoSparrow
The document contains a resume for Reynaldo P. Fernando providing his personal details, qualifications, work experience as a crane operator and deck foreman on offshore oil and gas projects, duties and responsibilities in those roles, and safety and technical training courses attended. It demonstrates over 25 years of experience working on offshore rigs, platforms, and vessels around the world as well as extensive safety certifications and technical skills in crane operation, rigging, and supervising deck crews.
Hafizan VSI Format CV
Mohd Hafizan is a Malaysian citizen working as a General Inspector/Assistant OIE for Repsol Oil & Gas Limited/Talisman Energy at the BRA oil platform. He has over 10 years of experience in non-destructive testing and inspection of offshore and onshore oil and gas facilities. He holds an engineering degree and various NDT certifications. His technical experience includes visual inspection, ultrasonic testing, magnetic particle testing, and rope access inspections on structures, pipelines, vessels, and other equipment for facilities in Malaysia, Thailand, Nigeria, Egypt and Myanmar.
Gary Fitzsimmons. CV .Oct- 2016
Gary Fitzsimmons is a highly experienced electrical inspector and technician with over 30 years of experience. He has worked on numerous offshore oil and gas projects both nationally and internationally, leading inspection teams and performing maintenance. He has a wide range of relevant qualifications and extensive experience inspecting and maintaining explosive hazardous electrical equipment according to international standards.
Job safety analysis
This document outlines the job hazards and safety controls for running completion equipment on a rig. It describes the tasks of preparing, rigging up, and running various packers and valves. Key hazards identified include dropped loads, pinch points, equipment failure, and crushed or struck by swinging loads. Controls include inspections, clear signals, tag lines, keeping personnel out of fall zones, and following Weatherford completion engineer instructions. Personal protective equipment like standard PPE is required.
CURRICULUM VITAE Neil
Neil Robertson is a deck foreman with over 34 years of experience as a scaffolder. He has extensive training and certifications in scaffolding, offshore safety, and emergency response. Robertson has worked on both onshore and offshore projects in the UK and held supervisory roles such as charge hand, general foreman, and deck foreman. He has experience with various scaffold structures and taking projects from drawings.
Manufacturing Lockout/Tagout by FMIC
This document provides information on lockout/tagout procedures for manufacturing facilities. It discusses management and supervisory responsibilities including developing lockout/tagout policies and procedures, providing training to employees, and enforcing compliance. The document outlines the roles and responsibilities of authorized employees who perform lockout/tagout and affected employees who work near servicing activities. It describes the lockout/tagout process including identifying energy sources, shutting down equipment, applying locks and tags, verifying isolation, and removal of locks. Common energy sources like electricity, hydraulics, pneumatics and mechanical motions are discussed. The importance of machine-specific lockout/tagout procedures is emphasized.
Lockout Tagout Training by Forestry Mutual
This document provides information on lockout/tagout procedures for manufacturing facilities. It discusses management and supervisory responsibilities for developing and enforcing lockout/tagout policies and procedures. It outlines the roles and responsibilities of authorized employees and affected employees. It describes the seven step lockout/tagout process and provides examples of locking out different energy sources like electricity, hydraulics, pneumatics etc. It discusses proper lockout practices and examples of improper practices. It includes signage related to lockout/tagout and examples of accidents that could occur from not following procedures. Finally it discusses OSHA consultative services available to assist with safety programs.
Manufacturing Lockout Tagout by FMIC
This document provides information on lockout/tagout procedures for manufacturing facilities. It discusses management and supervisory responsibilities including developing lockout/tagout policies and procedures, providing training to employees, and enforcing compliance. The document outlines the roles and responsibilities of authorized employees who perform lockout/tagout and affected employees who work near servicing activities. It describes the lockout/tagout process including identifying energy sources, shutting down equipment, applying locks and tags, verifying isolation, and removing locks and tags. Common energy sources like electricity, hydraulics, pneumatics, and mechanics are discussed. The document warns of legal consequences for non-compliance and features examples of proper and improper lockout/tagout practices.
Hazard Assessment Methodology of Liquid Hydrocarbon Tank | Risk Assessment of...
Gaurav Kumar Singh Rajput presents a methodology for assessing risks associated with liquid hydrocarbon storage tanks. The presentation outlines various tank fire accident scenarios and their potential causes, including operational errors, equipment failures, weather events, and maintenance issues. Case studies of past tank accidents in Jaipur and Kansas are examined to identify lessons learned. The methodology involves identifying potential process and non-process hazards, constructing a risk assessment flow diagram, and calculating risk through qualitative and quantitative analysis. Key aspects of the methodology include preventive maintenance, safety systems, qualitative and quantitative risk assessment, and layer of protection analysis.
Curriculum vitae
Neil Robertson is a 58-year-old married Scottish man working as a deck foreman. He has over 34 years of experience as a scaffolder and has worked on both onshore and offshore projects. He has held positions as a charge hand, foreman, and general foreman on various jobs. Robertson has extensive training and certifications in scaffolding, safety, offshore emergency response, and deck activities.
CURRICULUM VITAE Neil
Neil Robertson is a 58-year-old married Scottish man working as a deck foreman. He has over 34 years of experience as a scaffolder and has worked on both onshore and offshore projects. He has held positions such as charge hand, foreman, and general foreman on various jobs. Robertson has extensive training and certifications in scaffolding, safety, offshore emergency response, and deck activities.
My Contributions in Health and Safety, QA/QC and Basic of Site Execution in J...
The internship was divided into four parts
4 weeks: Site execution with emphasis on HSE and QA/QC.
2 weeks: Updating the status of Tower in Tracking Tool and creating a MSP program on the remaining activities left in the building.
1 week : Contract analysis
1 week : Marketing concepts used and preparation of case study on company.
CV Siam Update 31-10-2016
This curriculum vitae outlines the certifications and experience of Siam Ramadan Ahmed Sayed. He has over 15 years of experience as a diving supervisor working on projects involving pipelines, risers, and offshore structures. He has supervised jobs for many oil and gas companies in the Middle East and holds numerous safety and technical certifications.
OFFSHORE CV DYLAN OLIVIER UPDATE Oct 2014
Dylan Matthew Olivier is an IRATA Level 3 rope access technician with experience in rope access construction, maintenance, inspection and training. He has worked on offshore oil rigs and FPSOs in Angola performing tasks like bolt replacement, flowline installation, and maintenance of equipment. He has additional qualifications in confined space rescue, lifting, rigging, and safety training.
Airside Observation Statement -24.12.2015.xlsx(A).xlsx01
This document provides an airside observation statement from Andrew Louis, assessing safety compliance at various airport operations from December 9-24, 2015. Key findings include:
- Most departments scored satisfactory or above average in equipment positioning, servicing, and compliance with safety procedures. Ramp and traffic operations required attention regarding equipment usage.
- A total of 28 events were observed and assessed across departments, with most scoring satisfactorily in safety standards.
- For ramp/line base operations, most bays scored satisfactorily except for some issues with equipment positioning. Cargo apron required attention to equipment positioning.
- No incidents or accidents were reported, though continued compliance with safety reminders and best
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
More Related Content
Similar to MYP –HSE-P5-WT-0044 - 14-10-2021.pptx
Suraksha Jagriti.pptx
The document provides an overview of BALCO's health, safety, and environment (HSE) training module. It discusses BALCO's vision of zero harm, HSE core values, safety definitions, incident classifications, risk assessment process, safety standards including work at heights and isolation procedures, and BALCO's safety rules. The training aims to educate employees on BALCO's safety policies and procedures to prevent incidents and achieve their goal of zero harm.
Ali Lamont 2.8MB CV&Certs 2015
Alistair Lamont has over 40 years of experience as a mixed gas diver and supervisor. He has worked on numerous offshore oil and gas projects worldwide since 1977. He holds several certifications including hyperbaric welding inspector, NDT inspector, and mixed gas supervisor. His most recent roles have included dive supervisor positions in Southeast Asia, the Middle East, and the North Sea working on manifold installations, pipeline repairs, and wellhead replacements.
Introduction 1
The document describes an inspection conducted on 12/4/2016 of MMHE West yard, the largest fabrication yard in Malaysia, which found that while most health and safety systems were in good condition, there were five critical hazards identified - including risks from machinery, noise exposure, chemical storage, heat exposure, and lack of PPE - that required immediate corrective action from management to ensure compliance with relevant laws.
Abfad Ltd General Services Presentation
Abfad Ltd have been established since 1996, offering industrial rope access solutions to a variety of industries, such as power generation, oil and gas, renewable, offshore, shipyards and more.
Along side rope access Abfad also provide specialist solvent free coatings and corrosion protection, including single and double skin storage tank lining with integrated leak detection monitoring and pipeline corrosion prevention and monitoring systems.
This is a company profile of Abfad Ltd and a general presentation of the services we can provide and some of the big projects we have worked on over the years.
Geo Therm Ltd - Company Profile Booklet
Geo Therm company profile booklet providing a basic overview on the company, its formation, personnel and services sectors to aid existing maintenance regimes, condition monitoring for industry offshore, maritime and energy sector compliance needs.
ReyfernandoSparrow
The document contains a resume for Reynaldo P. Fernando providing his personal details, qualifications, work experience as a crane operator and deck foreman on offshore oil and gas projects, duties and responsibilities in those roles, and safety and technical training courses attended. It demonstrates over 25 years of experience working on offshore rigs, platforms, and vessels around the world as well as extensive safety certifications and technical skills in crane operation, rigging, and supervising deck crews.
Hafizan VSI Format CV
Mohd Hafizan is a Malaysian citizen working as a General Inspector/Assistant OIE for Repsol Oil & Gas Limited/Talisman Energy at the BRA oil platform. He has over 10 years of experience in non-destructive testing and inspection of offshore and onshore oil and gas facilities. He holds an engineering degree and various NDT certifications. His technical experience includes visual inspection, ultrasonic testing, magnetic particle testing, and rope access inspections on structures, pipelines, vessels, and other equipment for facilities in Malaysia, Thailand, Nigeria, Egypt and Myanmar.
Gary Fitzsimmons. CV .Oct- 2016
Gary Fitzsimmons is a highly experienced electrical inspector and technician with over 30 years of experience. He has worked on numerous offshore oil and gas projects both nationally and internationally, leading inspection teams and performing maintenance. He has a wide range of relevant qualifications and extensive experience inspecting and maintaining explosive hazardous electrical equipment according to international standards.
Job safety analysis
This document outlines the job hazards and safety controls for running completion equipment on a rig. It describes the tasks of preparing, rigging up, and running various packers and valves. Key hazards identified include dropped loads, pinch points, equipment failure, and crushed or struck by swinging loads. Controls include inspections, clear signals, tag lines, keeping personnel out of fall zones, and following Weatherford completion engineer instructions. Personal protective equipment like standard PPE is required.
CURRICULUM VITAE Neil
Neil Robertson is a deck foreman with over 34 years of experience as a scaffolder. He has extensive training and certifications in scaffolding, offshore safety, and emergency response. Robertson has worked on both onshore and offshore projects in the UK and held supervisory roles such as charge hand, general foreman, and deck foreman. He has experience with various scaffold structures and taking projects from drawings.
Manufacturing Lockout/Tagout by FMIC
This document provides information on lockout/tagout procedures for manufacturing facilities. It discusses management and supervisory responsibilities including developing lockout/tagout policies and procedures, providing training to employees, and enforcing compliance. The document outlines the roles and responsibilities of authorized employees who perform lockout/tagout and affected employees who work near servicing activities. It describes the lockout/tagout process including identifying energy sources, shutting down equipment, applying locks and tags, verifying isolation, and removal of locks. Common energy sources like electricity, hydraulics, pneumatics and mechanical motions are discussed. The importance of machine-specific lockout/tagout procedures is emphasized.
Lockout Tagout Training by Forestry Mutual
This document provides information on lockout/tagout procedures for manufacturing facilities. It discusses management and supervisory responsibilities for developing and enforcing lockout/tagout policies and procedures. It outlines the roles and responsibilities of authorized employees and affected employees. It describes the seven step lockout/tagout process and provides examples of locking out different energy sources like electricity, hydraulics, pneumatics etc. It discusses proper lockout practices and examples of improper practices. It includes signage related to lockout/tagout and examples of accidents that could occur from not following procedures. Finally it discusses OSHA consultative services available to assist with safety programs.
Manufacturing Lockout Tagout by FMIC
This document provides information on lockout/tagout procedures for manufacturing facilities. It discusses management and supervisory responsibilities including developing lockout/tagout policies and procedures, providing training to employees, and enforcing compliance. The document outlines the roles and responsibilities of authorized employees who perform lockout/tagout and affected employees who work near servicing activities. It describes the lockout/tagout process including identifying energy sources, shutting down equipment, applying locks and tags, verifying isolation, and removing locks and tags. Common energy sources like electricity, hydraulics, pneumatics, and mechanics are discussed. The document warns of legal consequences for non-compliance and features examples of proper and improper lockout/tagout practices.
Hazard Assessment Methodology of Liquid Hydrocarbon Tank | Risk Assessment of...
Gaurav Kumar Singh Rajput presents a methodology for assessing risks associated with liquid hydrocarbon storage tanks. The presentation outlines various tank fire accident scenarios and their potential causes, including operational errors, equipment failures, weather events, and maintenance issues. Case studies of past tank accidents in Jaipur and Kansas are examined to identify lessons learned. The methodology involves identifying potential process and non-process hazards, constructing a risk assessment flow diagram, and calculating risk through qualitative and quantitative analysis. Key aspects of the methodology include preventive maintenance, safety systems, qualitative and quantitative risk assessment, and layer of protection analysis.
Curriculum vitae
Neil Robertson is a 58-year-old married Scottish man working as a deck foreman. He has over 34 years of experience as a scaffolder and has worked on both onshore and offshore projects. He has held positions as a charge hand, foreman, and general foreman on various jobs. Robertson has extensive training and certifications in scaffolding, safety, offshore emergency response, and deck activities.
CURRICULUM VITAE Neil
Neil Robertson is a 58-year-old married Scottish man working as a deck foreman. He has over 34 years of experience as a scaffolder and has worked on both onshore and offshore projects. He has held positions such as charge hand, foreman, and general foreman on various jobs. Robertson has extensive training and certifications in scaffolding, safety, offshore emergency response, and deck activities.
My Contributions in Health and Safety, QA/QC and Basic of Site Execution in J...
The internship was divided into four parts
4 weeks: Site execution with emphasis on HSE and QA/QC.
2 weeks: Updating the status of Tower in Tracking Tool and creating a MSP program on the remaining activities left in the building.
1 week : Contract analysis
1 week : Marketing concepts used and preparation of case study on company.
CV Siam Update 31-10-2016
This curriculum vitae outlines the certifications and experience of Siam Ramadan Ahmed Sayed. He has over 15 years of experience as a diving supervisor working on projects involving pipelines, risers, and offshore structures. He has supervised jobs for many oil and gas companies in the Middle East and holds numerous safety and technical certifications.
OFFSHORE CV DYLAN OLIVIER UPDATE Oct 2014
Dylan Matthew Olivier is an IRATA Level 3 rope access technician with experience in rope access construction, maintenance, inspection and training. He has worked on offshore oil rigs and FPSOs in Angola performing tasks like bolt replacement, flowline installation, and maintenance of equipment. He has additional qualifications in confined space rescue, lifting, rigging, and safety training.
Airside Observation Statement -24.12.2015.xlsx(A).xlsx01
This document provides an airside observation statement from Andrew Louis, assessing safety compliance at various airport operations from December 9-24, 2015. Key findings include:
- Most departments scored satisfactory or above average in equipment positioning, servicing, and compliance with safety procedures. Ramp and traffic operations required attention regarding equipment usage.
- A total of 28 events were observed and assessed across departments, with most scoring satisfactorily in safety standards.
- For ramp/line base operations, most bays scored satisfactorily except for some issues with equipment positioning. Cargo apron required attention to equipment positioning.
- No incidents or accidents were reported, though continued compliance with safety reminders and best
Similar to MYP –HSE-P5-WT-0044 - 14-10-2021.pptx (20)
Hazard Assessment Methodology of Liquid Hydrocarbon Tank | Risk Assessment of...
Hazard Assessment Methodology of Liquid Hydrocarbon Tank | Risk Assessment of...
My Contributions in Health and Safety, QA/QC and Basic of Site Execution in J...
My Contributions in Health and Safety, QA/QC and Basic of Site Execution in J...
Airside Observation Statement -24.12.2015.xlsx(A).xlsx01
Airside Observation Statement -24.12.2015.xlsx(A).xlsx01
Recently uploaded
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Recently uploaded (20)
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
MYP –HSE-P5-WT-0044 - 14-10-2021.pptx
- 1. DOCUMENT NO. MYP –HSE-P5-WT-0044 KING SALMAN INTERNATIONAL COMPLEX FOR MARINE INDUSTRIES AND SERVICES PROJECT CONTRACT NO. 6600042823 (IK)
- 2. KING SALMAN INTERNATIONAL COMPLEX FOR MARINE INDUSTRIES AND SERVICES PROJECT Lead Auditor Muhammad Ali Members: Mr.Zhang _ Site Manager Atif Khan _ Scaffold Supervisor Mr.Mei _ Foreman IZZAT Shah _ HSE Officer Mr .Lu Jiang _ HSE Coordinator SAFETY INTERNAL WALKTHROUGH Position HSE Supervisor Department HSE –Dry Dock 4 & 5 COMPANY SINOHYDRO Signature: Signature:
- 3. OBSERVATION Found diesel tank of equipment was covered with the clothe. RECTIFICATION Cloth has been removed from diesel tank of equipment. Status: Closed Observation Date/Location: DRY DOCK 5
- 4. OBSERVATION Worker was observed by using sub standard face shield (Sino foundation) RECTIFICATION Sub standard face shield has been replaced with ANSI standard. Status: Closed Observation Date/Location: DRY DOCK 5
- 5. OBSERVATION Found naked electric power cable was laying on ground without having any protection. RECTIFICATION Electric power cables has been protected properly by plywood to reduce the tripping hazard and insulation damage as well. Status: Closed Observation Date/Location: DRY DOCK 5
- 6. OBSERVATION Electric power cables were not arranged properly RECTIFICATION Cables are properly arranged and buried to avoid from any tripping hazard. Status: Closed Observation Date/Location: DRY DOCK 5
- 7. OBSERVATION Signages was not placed to indicate the head bump hazard RECTIFICATION Head bump signage has been posted. Status: Closed Observation Date/Location: DRY DOCK 4
- 8. Thanks