RCITM pre-terminated MTP® trunk and fanout cables are designed for scalable optical connections to support various network protocols such as Ethernet and Fibre Channel. The company offers customizable solutions with a focus on high performance, craftsmanship, and customer satisfaction, providing a range of configurations and features to meet specific needs. Additionally, NETIG emphasizes their engineering expertise and customer-centric approach in delivering effective networking solutions.

1. RCI™ Pre-Terminated MTP®
Trunk and Fanout Cables
Applications
RCI™ pre-terminated MTP® trunk and fanout cables are utilized primarily in applications
where rapidly deployable and scalable optical connections are required to support
network bandwidth needs today and into the future. Our cables are engineered to
perform in all customer environments which require optical fiber to support 40/100 Gbps
Ethernet, InfiniBand™, Fibre Channel, PONS and other network protocols utilizing low
CTM
profile, high density structured cabling optical fiber solutions. Our goal for RCI™ cabling
products has always been to deliver the highest level of craftsmanship, innovation in
structured cabling installations, and to provide expertise to meet customer demands for
value and on time delivery. Our focus is to deliver customer-centric solutions
powered by NetIG.
MTP® to MTP® trunks and MTP® to discrete connector fanouts are utilized to facilitate
structured cabling solutions from the desktop to the data center. Adapter plates,
cassettes, and fiber distribution units are also available. These products will perform in
data centers, telecommunication rooms, zone structured cabling solutions and
anywhere innovative optical fiber connectivity is needed.
Features
• US Conec® precision aligned ferrules in 12 to 48 fiber ferrules for high performance
• MicroCore™ fiber from 12 to 144 strands in a variety of performance and physical
characteristics that saves space in pathways and meets applicable environmental codes
• Unique label identifiers are customizable
• Order any footage for a perfect fit
• Available in standard or Vivid (low loss) versions to meet your optical and financial budgets
• Custom trunk and fanout designs to meet specific customer requirements
• Pulling socks
• Low profile breakout for fanout cables
• Supports all polarity methods
• Fully tested with available reporting
Design/Engineering Statement
In addition to RCI™ pre-terminated MTP® trunk optical fiber cables, NetIG manufactures MTP® to discrete LC fanout cables in
a variety of types and configurations that include all the parameters and features already depicted along with right, left or
trident exit orientation. Specific breakouts and leg lengths for LC fanout solutions are derived from the customer’s actual
connecting devices. NetIG is a customer-focused company. We care. We listen. We create solutions that meet and exceed
your requirements and expectations. We take your vision for your networking needs and turn it into a delivered-data transport
product set. If you are looking for fiber solutions, please contact one of our dedicated experts at (425) 291-4200.
www.net-ig.com

2. RCI™ Pre-Terminated MTP® Trunk and Fanout Cables
constructions characteristics
Optical Fiber:
1x 8 8F MTP® to 8F MTP® OM1, OM2, OM3, OM4; OS1, OS2; BIMMF, BISMF; 8 to
144-Strands
1x12 12F MTP® to 12F MTP® Cable Construction:
1x16 16F MTP® to 2x8F MTP® Riser, Plenum, LSZH; Loose Tube, Tight Buffer, Indoor/
Outdoor, Bare or Ruggedized Ribbon; Armored
1x24 24F MTP® to 24F MTP® Connector:
1x24 24F MTP® to 2x12F MTP® MTP®, LC (Uniboot and Mini), Keyed
Options Available; FC, MTRJ, MU, SC, ST
2x12 2x12F MTP® to 2x12F MTP® and Custom
Connector Performance:
Standard and Vivid (Low Loss)
Polarity:
Methods A, B and C (Pins and No Pins)
1x12 8F MTP® to 4xLC DX
Length:
1x12 12F MTP® to 6xLC DX Customer Specific
1x24 24F MTP® to 12xLC DX Packaging:
Installation Location Specific; Variety of Box and Reel
Sizes; Pull Socks for Protection
Complete Construction Possibilities
• 8F, 12F, 16F, 24F and 48F MTP® • MTP® internal fanouts for cassettes • Extensive design and engineering capabilities for custom solutions
• Prizm® LightTurn® ferrule • Custom breakouts, bundling and leg staggering • Application protocol-specific solutions
• Single-ended pigtail • Source and destination labeling and packaging • Engineered for ease of installation
• Color-coded, strain-relief boots
425.291.4200
Contact NetIG for actual Part Number to utilize for ordering 866.814.8615
Polarity Methods Electronic Drawing Files/Specifications
Determine connectivity polarity method under ANSI/TIA®- • Technical drawings, product/project specifications
568-C.0-2 then to ANSI/TIA®-568-C.3.1 to choose a • CSI MasterFormat®
component type. For network interoperability, the polarity • Available in AutoCAD®, PDF and Visio®
method type should be selected in advance and maintained
throughout the entire installation. This includes jumpers,
adapter plates, cassettes, modules, couplers, harnesses and
trunks. See also NetIG Technical Systems Bulletin (TSB) on
Polarity for use in Data Centers, SANs and Clouds.
USConec MTP® Connector Affiliation
The MTP® connector is a high performance version of the MPO NetIG is a Corporate Member of the Telecommunications
connector with multiple engineered product enhancements Industry Association (TIA®) and a voting participating member
to improve optical and mechanical performance when within the TR-42 Engineering Standards Committee. NetIG is a
compared to generic MPO connectors. The MTP® connector Corporate Member of the Building Industry Consulting Service
is in complete compliance with all MPO connector standards International (BICSI™) with several Registered Communications
and is inter-matable with all generic MPO-style connectors. Distribution Designers (RCDDs) on staff.
21229 72nd Avenue South Kent, WA 98032 t:425.291.4200 866.814.8615 www.net-ig.com