Frazer Ltd. designed one of the first Mobile Stroke Units in the country to provide critical on-site care and diagnostics for stroke patients. The unit features an integrated CT scanner, workspaces, storage, and several patented safety systems to secure equipment during transport and collisions. Testing showed the CT scanner mounting system passed a collision simulation test and was undamaged even when subjected to forces 50% greater than required.
The ILT-6000 contains a low profile waveguide that is inserted into a waveguide sleeve isolation well and float assembly. The waveguide sleeve isolates the internal waveguide from the process environment and protects it from excessive process conditions. This provides an additional safety barrier for the operator. The major benefit is the transmitter and waveguide can be removed for field checking without interruption or exposure to the process environment
The AWT 200 is a portable video microscope that allows for in-situ inspection of fiber optic connector endfaces without disassembly. It has a magnification of 140x-400x and can inspect a variety of connector types. The AWT 200 has a rechargeable battery, interchangeable tips, and can capture images for documentation. It provides a quick and non-invasive way to inspect fiber optic connectors in the field.
Boiler tube welds require a rapid volumetric inspection method. Traditionally, radiography (RT) is used, but this technology has several drawbacks. RT is insensitive to mis-oriented planar defects, it does not provide immediate feedback to the welders, and is disruptive to other activities. Mostly, safety regulations are getting more and more severe worldwide drastically restricting the use of radiography.
The document is a user manual for the TE10A thyristor power controller. It can control loads of up to 20kW using burst-firing, single-cycle, or advanced single-cycle firing modes. The manual provides specifications for the controller including its current ratings, voltage range, firing indicators, control inputs, safety guidelines, and installation instructions.
This document summarizes the features of the MICRO Metal Detector MDH-6001-6001O walk through metal detector. It has 6 detection areas with LED indicators to precisely show the alarmed area. Sensitivity can be adjusted individually for each area between 0-99 levels. It uses advanced digital technology to accurately detect metals while avoiding missed or incorrect alarms. The metal detector is water resistant and can operate in varying temperatures and humidity levels. It was made in Korea and is commonly used for security screening in courts and other facilities.
Low Pressure Turbine Rotor Weld InspectionZetec Inc.
Low pressure Turbine Rotor is an important part of steam turbine, Fatigue cracking tends to occur on the surface of the weld. In order to ensure the safe operation of power equipment aLow pressure Turbine Rotor is an important part of steam turbine, Fatigue cracking tends to occur on the surface of the weld. In order to ensure the safe operation of power equipment and personnel safety, the importance of safety evaluation on in service high-speed rotating turbine rotors is increasingly prominent. nd personnel safety, the importance of safety evaluation on in service high-speed rotating turbine rotors is increasingly prominent.
DMS technologies offers approved battery and charger kits for rail infrastructure applications including level crossings, point switching, and signalling. The Red Flash battery uses proven VRLA lead acid technology in modular steel cases to provide reliable, long-life power. The batteries are maintenance free and come with PADS approved chargers.
The document is a service manual for AVL electrolyte analyzers models 9120, 9130, 9140, 9180, and 9181. It contains information on specifications, software operation, description of modules, maintenance, troubleshooting, adjustments, parts lists, and interface specifications. Flow charts are provided showing the software operation and sequence for measurements, printing functions, quality control, maintenance, calibration, and service functions. Detailed diagrams and descriptions of electronic and mechanical components are included to aid in repair.
The ILT-6000 contains a low profile waveguide that is inserted into a waveguide sleeve isolation well and float assembly. The waveguide sleeve isolates the internal waveguide from the process environment and protects it from excessive process conditions. This provides an additional safety barrier for the operator. The major benefit is the transmitter and waveguide can be removed for field checking without interruption or exposure to the process environment
The AWT 200 is a portable video microscope that allows for in-situ inspection of fiber optic connector endfaces without disassembly. It has a magnification of 140x-400x and can inspect a variety of connector types. The AWT 200 has a rechargeable battery, interchangeable tips, and can capture images for documentation. It provides a quick and non-invasive way to inspect fiber optic connectors in the field.
Boiler tube welds require a rapid volumetric inspection method. Traditionally, radiography (RT) is used, but this technology has several drawbacks. RT is insensitive to mis-oriented planar defects, it does not provide immediate feedback to the welders, and is disruptive to other activities. Mostly, safety regulations are getting more and more severe worldwide drastically restricting the use of radiography.
The document is a user manual for the TE10A thyristor power controller. It can control loads of up to 20kW using burst-firing, single-cycle, or advanced single-cycle firing modes. The manual provides specifications for the controller including its current ratings, voltage range, firing indicators, control inputs, safety guidelines, and installation instructions.
This document summarizes the features of the MICRO Metal Detector MDH-6001-6001O walk through metal detector. It has 6 detection areas with LED indicators to precisely show the alarmed area. Sensitivity can be adjusted individually for each area between 0-99 levels. It uses advanced digital technology to accurately detect metals while avoiding missed or incorrect alarms. The metal detector is water resistant and can operate in varying temperatures and humidity levels. It was made in Korea and is commonly used for security screening in courts and other facilities.
Low Pressure Turbine Rotor Weld InspectionZetec Inc.
Low pressure Turbine Rotor is an important part of steam turbine, Fatigue cracking tends to occur on the surface of the weld. In order to ensure the safe operation of power equipment aLow pressure Turbine Rotor is an important part of steam turbine, Fatigue cracking tends to occur on the surface of the weld. In order to ensure the safe operation of power equipment and personnel safety, the importance of safety evaluation on in service high-speed rotating turbine rotors is increasingly prominent. nd personnel safety, the importance of safety evaluation on in service high-speed rotating turbine rotors is increasingly prominent.
DMS technologies offers approved battery and charger kits for rail infrastructure applications including level crossings, point switching, and signalling. The Red Flash battery uses proven VRLA lead acid technology in modular steel cases to provide reliable, long-life power. The batteries are maintenance free and come with PADS approved chargers.
The document is a service manual for AVL electrolyte analyzers models 9120, 9130, 9140, 9180, and 9181. It contains information on specifications, software operation, description of modules, maintenance, troubleshooting, adjustments, parts lists, and interface specifications. Flow charts are provided showing the software operation and sequence for measurements, printing functions, quality control, maintenance, calibration, and service functions. Detailed diagrams and descriptions of electronic and mechanical components are included to aid in repair.
Catalog design and printing made easy with brand design company in Atlanta. The medical supply catalog specialty formulated design helps medical customers provide a high level of quality care to their patients.
Take a look at the spec for the 10.4" TFT Medical Grade Panel Computer.
Key features and dimensions included.
For more information contact us via email on info@crystal-display.com or call +44(0) 1634 327420.
Solution: High Temperature Hydrogen Attack (HTHA) Inspection ChallengeZetec Inc.
High Temperature Hydrogen Attack is a common challenge in Oil & Gas inspections. Zetec TOPAZ64 is the ideal solution with the necessary tools and features to set-up and deploy all recommended examination techniques.
Many challenges exist with turbine blade inspections -- Cracks and crack initiation in the blade attachment serrations need to be reliably detected. Complex geometry of the component is a very challenging factor for inspection design. In-situ inspection without blade removal is required, thus limiting blade access. This application presentation highlights a recommended solution with techniques to overcome the challenges.
X8/X10/X12
Patient Monitor
Patient Monitor User Manual Product
Specification
- 1 - A Product Specification
NOTE: The performance of the equipment with ☆ mark is determined to be essential
performance.
A.1 Classification Anti-electroshock type Class I equipment and internal powered equipment
Anti-electroshock degree CF
Ingress Protection IPX1
Disinfection/sterilization method Refer to Chapter Care and Cleaning for details.
Working system Continuous operation equipment
Compliant with Standards IEC 60601-1: 2005+A1 :2012; IEC 60601-1-2: 2014;
EN 60601-1: 2006+A1 :2013; EN 60601-1-2: 2015;
IEC 60601-2-49: 2011
A.2 Physical Specifications
A.2.1 Size and Weight
Product Size Weight
X8 236±2 mm (W)×236±2 mm (H)×147±2 mm (D) < 2.4 kg Standard
configurations,
no battery or
accessories
X10 261±2 mm (W)×246±2 mm (H)×146±2 mm (D) < 2.8 kg
X12 306±2 mm (W)×309±2 mm (H)×151±2 mm (D) < 3.5 kg
A.2.2 Function Configuration
Product Standard Configuration Optional Configuration
X8 ECG (3 electrodes), ECG (5 electrodes), RESP,
TEMP (T1), SpO2, NIBP
ECG (6 electrodes),
ECG (10 electrodes),
CO2, Wi-Fi, Recorder
X10 ECG (3 electrodes), ECG (5 electrodes), RESP,
TEMP (T1, T2), SpO2, NIBP
ECG (6 electrodes),
ECG (10 electrodes),
IBP, CO2, Wi-Fi,
Recorder
X12 ECG (3 electrodes), ECG (5 electrodes), RESP,
TEMP (T1, T2), SpO2, NIBP
ECG (6 electrodes),
ECG (10 electrodes),
IBP, CO2,
ULTRACON-SERVICE LLC pressents
the EDDYCON C eddy current flaw detector. It is used for detection of surface cracks in various parts, cracks in holes and multilayered structures, surface and subsurface corrosion.
Eddy current is an acceptable method for detecting conductivity of non-ferrous materials and coating thickness.
For further information, please visit our website at www.ultracon-service.com.ua
Instruction Manual ARMASIGHT AVENGER Series NV Monocular | Optics TradeOptics-Trade
This document is the user manual for the Avenger Night Vision Monocular. It contains important export restrictions and legal notices. It then provides descriptions and operating instructions for the monocular's parts like the objective lens, battery compartment, and infrared illuminator. It explains how to install batteries and attach accessories like a tripod. It provides instructions for operating the controls like the function switch, lens focus, and diopter adjustment. It also describes indicator lights and battery life.
The document discusses electrical safety solutions from Bender Group. It provides an overview of Bender's insulation monitoring devices, insulation fault location systems, measuring and monitoring relays, residual current monitors, and residual current monitoring systems. These products monitor key electrical parameters to ensure safety, reliability, and efficiency for applications such as industrial installations, power plants, medical facilities, and more. Bender's solutions help reduce costs through early fault detection, increased uptime, and minimized maintenance needs.
This document provides information on Siemens LV 30 circuit breakers up to 3200 A, including an overview of their benefits, areas of application, design, and communication capabilities. The key points are:
1) The circuit breakers offer safety, reliability, easy operation, modularity, and low energy consumption. They can communicate via PROFIBUS DP.
2) They are intended for indoor use in non-harsh environments. Versions have breaking capacities up to 80 kA and rated currents from 630 to 3200 A.
3) Designs include fixed or withdrawable versions with various operating mechanisms and electronic trip units. Withdrawable versions have connected, test, and disconnected positions.
The document provides information on Siemens LV 30 air circuit breakers (ACBs), including:
- Rated currents from 630A to 6300A across three sizes, for AC voltages up to 690V/1000V and breaking capacities from 50kA to 100kA.
- Modular design allows for retrofitting of components like trip units, displays, and communication modules. Rating plugs allow changing rated current without replacing parts.
- Withdrawable and fixed-mounted versions available. Accessories include operating mechanisms, auxiliary switches, and releases.
- Intended for use in indoor electrical installations for switching and protecting equipment. Complies with relevant IEC and DIN standards
The document discusses Siemens' Sentron 3WL air circuit breaker. It offers intelligent simplicity with modular design allowing use of standard configurations. It integrates switching, protection, metering and power management. The breaker is available in three frame sizes from 100A to 6300A. It offers cost savings through modularity, compact size, and high electrical life. Planning is easy with identical door cutouts across frame sizes. The breaker provides maximum safety through distinct ready-to-close indicators and other protections. It offers system solutions with communication capabilities and remote diagnosis via the internet.
How WPI's microinjection system Micro-ePORE works?raj_chandra
In this PDF you will find the complete user manual or WPI's simple and versatile next generation targeted microinjection system micro-ePORE which is used for efficient microinjection of a diverse array of compounds and biomolecules into oocytes and pre-implantation stage of embryos in animal models including mice, rodents, zebrafish etc.
NetSure 4015 30kW 400V DC System Datasheetmmurrill
The document summarizes an AC to DC power system called the NetSure 4015. It is designed to provide up to 30kW of 400V DC power from an AC input. The system uses high-efficiency rectifiers in a compact design. It can be configured in standard 19-inch racks with power, control, and battery components. Safety features include high resistance grounding and ground fault detection. The system offers configurable outputs, high efficiency, and battery backup capabilities.
Original NPN SILICON POWER DARLINGTONS Transistor TIP142 10A 100V TO-220F New...AUTHELECTRONIC
This document provides information on complementary power Darlington transistors TIP142 and TIP147, including:
- They are manufactured using planar technology with a "base island" layout and monolithic Darlington configuration for high gain and low saturation voltage.
- Electrical characteristics including current and voltage ratings, gain, switching times and safe operating area.
- Package details for the TO-247 package including mechanical drawings and dimensions.
- Revision history noting changes from previous revisions including package changes and technology updates.
The 770 Series door lock offers enhanced security and accessibility for hotels. It maintains an audit trail of user activity and works with web-based or portable access control systems. Key features include a tamperproof design with emergency access options, low maintenance needs through long-lasting batteries and resistant construction, and upgradeable firmware. The lock provides accountability through recording of the last 200 transactions.
The Generation E-760 door lock is a popular choice for hotels of various sizes due to its robust and reliable design that is simple to operate. It maintains an audit trail for user accountability and works with both web-based and portable access control systems. It provides high security with features like a tamperproof design, solid deadbolt, emergency access options, and long-lasting batteries. The lock is low maintenance and upgradeable with a wear resistant construction.
Adapting Eddy Current Array Technology for NDTZetec Inc.
Discover the Zetec Eddy Current Surface Array solution. This presentation will cover solutions specifically designed to solve the NDT inspection challenges that power generation, oil and gas, as well as aerospace companies face everyday.
The total solution includes the MIZ®-200 eddy current array instrument combined with the Surface Array Flex Probe and Velocity® acquisition and analysis software.
Benefits include:
• High performance
• Dependable and accurate
• Fast surface inspection
From detecting extremely small defects to inspecting non-flat surfaces and covering a wide area in a single pass, Zetec delivers. Our powerful and integrated eddy current array technologies deliver the results you can count on.
Ls catalog thiet bi tu dong i g5a_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
This document provides specifications for high speed optocouplers that can be used for applications such as inverter circuits and intelligent power modules. The optocouplers have short propagation delays and high current transfer ratios, making them suitable for switching applications. They are available in different packages, such as 8-pin DIP and SO-8, and have high common mode transient immunity and electrical insulation between the input and output. Safety approvals and insulation characteristics are also specified.
This document summarizes demographic data and community outreach efforts for Clinton Hill, Brooklyn. It finds that Clinton Hill has a median age of 31, many residents with college degrees, and more female residents. It also describes local landmarks and positive partnerships with groups like Pratt Institute. Finally, it proposes a timeline of art appreciation events and strategies to increase Brooklyn Nets ticket sales through social media contests, school outreach, and special events.
Santri Perwira Dharma applied for a position at PT Valmet. He has a bachelor's degree in Informatics Engineering and over 5 years of experience in IT roles at various companies. His experience includes customer service, IT assistance, network administration, and IT officer positions. He believes his technical skills and communication abilities would make him a strong candidate for the open role at PT Valmet. He has included his resume and references for their consideration.
LeBron James will partner with Bevel Code to increase awareness of their grooming products for men of color. Through social media promotions and events at Boys and Girls Clubs that James sponsors, Bevel Code can expand its brand. James will host seminars on preparing for interviews and internships, including proper grooming and attire. Bevel Code will also donate suits to help young men secure jobs and internships. James will promote Bevel Code's message as a fashion influencer and role model for the African American community.
Catalog design and printing made easy with brand design company in Atlanta. The medical supply catalog specialty formulated design helps medical customers provide a high level of quality care to their patients.
Take a look at the spec for the 10.4" TFT Medical Grade Panel Computer.
Key features and dimensions included.
For more information contact us via email on info@crystal-display.com or call +44(0) 1634 327420.
Solution: High Temperature Hydrogen Attack (HTHA) Inspection ChallengeZetec Inc.
High Temperature Hydrogen Attack is a common challenge in Oil & Gas inspections. Zetec TOPAZ64 is the ideal solution with the necessary tools and features to set-up and deploy all recommended examination techniques.
Many challenges exist with turbine blade inspections -- Cracks and crack initiation in the blade attachment serrations need to be reliably detected. Complex geometry of the component is a very challenging factor for inspection design. In-situ inspection without blade removal is required, thus limiting blade access. This application presentation highlights a recommended solution with techniques to overcome the challenges.
X8/X10/X12
Patient Monitor
Patient Monitor User Manual Product
Specification
- 1 - A Product Specification
NOTE: The performance of the equipment with ☆ mark is determined to be essential
performance.
A.1 Classification Anti-electroshock type Class I equipment and internal powered equipment
Anti-electroshock degree CF
Ingress Protection IPX1
Disinfection/sterilization method Refer to Chapter Care and Cleaning for details.
Working system Continuous operation equipment
Compliant with Standards IEC 60601-1: 2005+A1 :2012; IEC 60601-1-2: 2014;
EN 60601-1: 2006+A1 :2013; EN 60601-1-2: 2015;
IEC 60601-2-49: 2011
A.2 Physical Specifications
A.2.1 Size and Weight
Product Size Weight
X8 236±2 mm (W)×236±2 mm (H)×147±2 mm (D) < 2.4 kg Standard
configurations,
no battery or
accessories
X10 261±2 mm (W)×246±2 mm (H)×146±2 mm (D) < 2.8 kg
X12 306±2 mm (W)×309±2 mm (H)×151±2 mm (D) < 3.5 kg
A.2.2 Function Configuration
Product Standard Configuration Optional Configuration
X8 ECG (3 electrodes), ECG (5 electrodes), RESP,
TEMP (T1), SpO2, NIBP
ECG (6 electrodes),
ECG (10 electrodes),
CO2, Wi-Fi, Recorder
X10 ECG (3 electrodes), ECG (5 electrodes), RESP,
TEMP (T1, T2), SpO2, NIBP
ECG (6 electrodes),
ECG (10 electrodes),
IBP, CO2, Wi-Fi,
Recorder
X12 ECG (3 electrodes), ECG (5 electrodes), RESP,
TEMP (T1, T2), SpO2, NIBP
ECG (6 electrodes),
ECG (10 electrodes),
IBP, CO2,
ULTRACON-SERVICE LLC pressents
the EDDYCON C eddy current flaw detector. It is used for detection of surface cracks in various parts, cracks in holes and multilayered structures, surface and subsurface corrosion.
Eddy current is an acceptable method for detecting conductivity of non-ferrous materials and coating thickness.
For further information, please visit our website at www.ultracon-service.com.ua
Instruction Manual ARMASIGHT AVENGER Series NV Monocular | Optics TradeOptics-Trade
This document is the user manual for the Avenger Night Vision Monocular. It contains important export restrictions and legal notices. It then provides descriptions and operating instructions for the monocular's parts like the objective lens, battery compartment, and infrared illuminator. It explains how to install batteries and attach accessories like a tripod. It provides instructions for operating the controls like the function switch, lens focus, and diopter adjustment. It also describes indicator lights and battery life.
The document discusses electrical safety solutions from Bender Group. It provides an overview of Bender's insulation monitoring devices, insulation fault location systems, measuring and monitoring relays, residual current monitors, and residual current monitoring systems. These products monitor key electrical parameters to ensure safety, reliability, and efficiency for applications such as industrial installations, power plants, medical facilities, and more. Bender's solutions help reduce costs through early fault detection, increased uptime, and minimized maintenance needs.
This document provides information on Siemens LV 30 circuit breakers up to 3200 A, including an overview of their benefits, areas of application, design, and communication capabilities. The key points are:
1) The circuit breakers offer safety, reliability, easy operation, modularity, and low energy consumption. They can communicate via PROFIBUS DP.
2) They are intended for indoor use in non-harsh environments. Versions have breaking capacities up to 80 kA and rated currents from 630 to 3200 A.
3) Designs include fixed or withdrawable versions with various operating mechanisms and electronic trip units. Withdrawable versions have connected, test, and disconnected positions.
The document provides information on Siemens LV 30 air circuit breakers (ACBs), including:
- Rated currents from 630A to 6300A across three sizes, for AC voltages up to 690V/1000V and breaking capacities from 50kA to 100kA.
- Modular design allows for retrofitting of components like trip units, displays, and communication modules. Rating plugs allow changing rated current without replacing parts.
- Withdrawable and fixed-mounted versions available. Accessories include operating mechanisms, auxiliary switches, and releases.
- Intended for use in indoor electrical installations for switching and protecting equipment. Complies with relevant IEC and DIN standards
The document discusses Siemens' Sentron 3WL air circuit breaker. It offers intelligent simplicity with modular design allowing use of standard configurations. It integrates switching, protection, metering and power management. The breaker is available in three frame sizes from 100A to 6300A. It offers cost savings through modularity, compact size, and high electrical life. Planning is easy with identical door cutouts across frame sizes. The breaker provides maximum safety through distinct ready-to-close indicators and other protections. It offers system solutions with communication capabilities and remote diagnosis via the internet.
How WPI's microinjection system Micro-ePORE works?raj_chandra
In this PDF you will find the complete user manual or WPI's simple and versatile next generation targeted microinjection system micro-ePORE which is used for efficient microinjection of a diverse array of compounds and biomolecules into oocytes and pre-implantation stage of embryos in animal models including mice, rodents, zebrafish etc.
NetSure 4015 30kW 400V DC System Datasheetmmurrill
The document summarizes an AC to DC power system called the NetSure 4015. It is designed to provide up to 30kW of 400V DC power from an AC input. The system uses high-efficiency rectifiers in a compact design. It can be configured in standard 19-inch racks with power, control, and battery components. Safety features include high resistance grounding and ground fault detection. The system offers configurable outputs, high efficiency, and battery backup capabilities.
Original NPN SILICON POWER DARLINGTONS Transistor TIP142 10A 100V TO-220F New...AUTHELECTRONIC
This document provides information on complementary power Darlington transistors TIP142 and TIP147, including:
- They are manufactured using planar technology with a "base island" layout and monolithic Darlington configuration for high gain and low saturation voltage.
- Electrical characteristics including current and voltage ratings, gain, switching times and safe operating area.
- Package details for the TO-247 package including mechanical drawings and dimensions.
- Revision history noting changes from previous revisions including package changes and technology updates.
The 770 Series door lock offers enhanced security and accessibility for hotels. It maintains an audit trail of user activity and works with web-based or portable access control systems. Key features include a tamperproof design with emergency access options, low maintenance needs through long-lasting batteries and resistant construction, and upgradeable firmware. The lock provides accountability through recording of the last 200 transactions.
The Generation E-760 door lock is a popular choice for hotels of various sizes due to its robust and reliable design that is simple to operate. It maintains an audit trail for user accountability and works with both web-based and portable access control systems. It provides high security with features like a tamperproof design, solid deadbolt, emergency access options, and long-lasting batteries. The lock is low maintenance and upgradeable with a wear resistant construction.
Adapting Eddy Current Array Technology for NDTZetec Inc.
Discover the Zetec Eddy Current Surface Array solution. This presentation will cover solutions specifically designed to solve the NDT inspection challenges that power generation, oil and gas, as well as aerospace companies face everyday.
The total solution includes the MIZ®-200 eddy current array instrument combined with the Surface Array Flex Probe and Velocity® acquisition and analysis software.
Benefits include:
• High performance
• Dependable and accurate
• Fast surface inspection
From detecting extremely small defects to inspecting non-flat surfaces and covering a wide area in a single pass, Zetec delivers. Our powerful and integrated eddy current array technologies deliver the results you can count on.
Ls catalog thiet bi tu dong i g5a_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
This document provides specifications for high speed optocouplers that can be used for applications such as inverter circuits and intelligent power modules. The optocouplers have short propagation delays and high current transfer ratios, making them suitable for switching applications. They are available in different packages, such as 8-pin DIP and SO-8, and have high common mode transient immunity and electrical insulation between the input and output. Safety approvals and insulation characteristics are also specified.
This document summarizes demographic data and community outreach efforts for Clinton Hill, Brooklyn. It finds that Clinton Hill has a median age of 31, many residents with college degrees, and more female residents. It also describes local landmarks and positive partnerships with groups like Pratt Institute. Finally, it proposes a timeline of art appreciation events and strategies to increase Brooklyn Nets ticket sales through social media contests, school outreach, and special events.
Santri Perwira Dharma applied for a position at PT Valmet. He has a bachelor's degree in Informatics Engineering and over 5 years of experience in IT roles at various companies. His experience includes customer service, IT assistance, network administration, and IT officer positions. He believes his technical skills and communication abilities would make him a strong candidate for the open role at PT Valmet. He has included his resume and references for their consideration.
LeBron James will partner with Bevel Code to increase awareness of their grooming products for men of color. Through social media promotions and events at Boys and Girls Clubs that James sponsors, Bevel Code can expand its brand. James will host seminars on preparing for interviews and internships, including proper grooming and attire. Bevel Code will also donate suits to help young men secure jobs and internships. James will promote Bevel Code's message as a fashion influencer and role model for the African American community.
The AdWords campaign for Edison Grainery achieved mixed results. It generated 164 clicks but had a lower than targeted CTR of 0.24%. The Beans and Superfoods campaigns performed best, receiving the most clicks and impressions. While some goals were partially met, like increased website traffic and social media presence, others like sales increases were not fully achieved. The campaign increased knowledge of effective keyword selection and budget allocation strategies. Future campaigns should continue top performing campaigns with increased budgets over longer periods.
This document summarizes a study examining the entrepreneurial interests, influencers, and perspectives of agribusiness students at Cal Poly. The study involved surveying 140 current and former agribusiness students, with 132 providing qualified responses. The findings suggest that most agribusiness students are interested in developing entrepreneurial skills and pursuing entrepreneurial careers. The document provides background on trends driving demand for innovation and entrepreneurship in agriculture, such as growing population and need for sustainability. It also reviews literature on characteristics of successful entrepreneurs and demand for entrepreneurship education.
Edison Grainery is a family-owned organic ingredients supplier founded in 2011 in Oakland, CA. It has expanded from a small space to facilities totaling 30,000 sq ft while maintaining low prices and a mission of sustainability and affordability. The company sources from around the world and offers a variety of grains, flours, pastas, beans and more. To further growth, a proposed Google AdWords campaign aims to increase brand awareness and online sales of Edison Grainery through targeted keyword advertising. The campaign utilizes seven campaigns and thirteen ad groups focused on popular products like quinoa, grains and beans. Success will be measured by social media growth and increased online sales.
Pacorr Melt Flow Index tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index
of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a
jet of a particular length and diameter.
Why use linear tranducer? This presentation takes you through the details and options of Gemco 958A Compact Housing, perhaps the most versatile and rugged linear transducer made for all sorts of hydraulics installations
Implementation of slow down and stop system:
• PDS system needs to be connected to engine protection system
• Parts needed for slow down and stop system
• Electronic floor mounted pedal
• Electronic control unit
• Electronic actuator
We are manufacturers of cement autoclaves in India since 1990. Our cement autoclaves are widely used for analyzing estimated delayed expansion of Portland cement. Which is caused due hydration reaction of calcium oxide and magnesium oxide. For More Information Please Logon http://goo.gl/byU61L
H. Fillunger was established in 1926 in India as a trading company and incorporated as a private limited company in 1957. It has three main divisions: LPG, which manufactures LPG regulators and components mainly for export; Vacuum, which manufactures high and ultra-high vacuum components for research in India; and Agency, which represents manufacturers of industrial materials and equipment. The Vacuum Division launched its first product in 1959 and now manufactures a wide range of vacuum equipment and components used in research.
Automotive days 2014 ts-54 xx-v1.1 (Full Version)Interlatin
This document describes an automotive functional testing seminar taking place in Mexico from May 19-23, 2014. It then provides details on Keysight Technologies' TS-54XX functional test platform, including various switch load unit and load card options. This scalable platform is suitable for testing applications with high current and voltage requirements, such as automotive functional testing. The document discusses the platform's modular design, integrated measurement and switching capabilities, and support for automation software.
Tyco Electronics is a leading provider of sensor technologies for the automotive industry. They offer contactless sensor solutions that eliminate wear issues and provide increased reliability compared to contact sensors. Tyco has expertise in Hall effect, MR, PLCD, and temperature sensor technologies and can assist customers with selecting the appropriate technology and defining the mechanical, electrical, and magnetic interfaces for new sensor applications. Tyco provides sensors for applications such as automated transmissions, clutches, turbochargers, and various vehicle controls and measurements.
Ultra Low Temperature Freezers manufacturersJames Samith
The document summarizes an ultra-low temperature freezer with the following key features:
- It can reach temperatures as low as -86°C and features targeted refrigeration, five methods for energy saving, and low noise design.
- It uses vacuum insulation panels and three-dimensional thermal insulation to maximize storage capacity while improving energy efficiency.
- It includes optional accessories like temperature recording, safety gloves, cryo racks, and comes with remote monitoring and data storage systems.
Ultra Low Temperature Freezers ManufacturesJames Samith
The Newtronic -86°C Ultra Low Freezer is designed through research and development to provide reliable research sample storage conditions for laboratories, hospital depots and more. Refocused on our cooling systems, control/monitoring alarms, ergonomics
Industrial Automation Company In India | Electrical Automation Company in Ind...codewithharsi
Max Engineering & Automation (P) Ltd is a premier industrial automation company in India, dedicated to revolutionizing industries through cutting-edge electrical automation solutions. With commitment to innovation and excellence, we offer tailored Industrial Automation Services to enhance efficiency and productivity.
The Thermo Scientific NextGuard x-ray detection system provides cost-effective and sensitive detection of foreign objects in packaged food products. It uses a unique non-linear x-ray detector design that eliminates inspection blind spots and ensures 100% detection for any product size or shape. The system offers options for customization, easy maintenance, and is designed for use in compliance with worldwide food safety standards.
The document discusses IRD's condition monitoring technology for machines. It describes their 6600 series vibration and process monitors that meet API standards and provide vibration analysis, temperature monitoring, and data collection capabilities. The 3603 data interface unit allows connecting up to 200 monitors via RS485 and collecting data from them to transfer to host computers using Ethernet or RS232 connections. The Oliver2 software is used for long-term trending, alarm management, and vibration analysis from the collected data. IRD's systems have been selected for use by major oil and gas companies on various projects due to meeting industry standards.
The document describes a high frequency surgical C-arm with a stationary anode tube, 9-inch image intensifier, and computerized workstation manufactured by ADONIS Medical Systems. It provides an overview of the technical specifications and components of the mobile C-arm system. The C-arm features a 40 kHz generator, stationary anode x-ray tube, 9-inch image intensifier, 1/2-inch CCD camera, computerized workstation, and can be used for procedures in orthopedics, urology and other areas. It allows for fluoroscopy, radiography, image storage and processing capabilities. The system is designed to provide efficient, reliable and easy to use intraoperative imaging.
WEG manufactures DC motors with power ratings up to 10,000 kW. The motors have robust construction and are suitable for applications in industries like paper, plastics, and steel rolling. The DC motors offer features like wide speed variation, high efficiency, and ability to handle dynamic loads. WEG provides related products like converters and controllers to create complete DC drive systems.
بوابة كشف معادن 6 مناطق الوكيل هاى تك نور
بوابة كشف معادن ذات انذار صوتى وسمعى
بوابات كشف معادن ذات 100 درجة من الحساسية للمعادن
بوابات كشف معادن ذات لمبات داخلية تحذيرية لتحديد مكان الجسم المعدنى
بوابات كشف معادن يمكن التحكم فى درجة وصوت التنبية الصوتى للبوابة
https://goo.gl/JagwuN
Brochure- What's New at Probe Aug 15 Rev 4Marc McKinlay
Probe provides a variety of open hole logging tools to assess hydrocarbon reservoirs, including a Litho-density Tool to measure density and lithology, Compensated Neutron Tools to measure porosity and identify fluid types, and a Dual Induction Laterlog to measure deep, medium, and shallow resistivity. Probe manufactures a complete portfolio of downhole tools used in combination to better understand reservoirs.
We are manufacturers of Hot air oven or laboratory oven in India since 1990. Our laboratory oven are widely used
for day to day heating and drying applications performed in various laboratories.
This document provides information on several models of centrifuges for industrial and laboratory use. It describes the Digtor 22 C series which includes heated and unheated models with capacities of 4 or 8 tubes. Key features highlighted include a touchscreen interface, safety features on the lid, automatic disconnection, and rotors and adapters that can be autoclaved. Dimensions, weights, and electrical specifications are provided for each model. Accessories include various tube sizes and types as well as an optional gas release system.
Swastik Power | Digital Multimeter, Clamp Meter, Voltage Detectors, Infrared ...Indian Market Place
We are in the Wholesaling, Trading, Distributing and Supplying of Digital Multimeter, Clamp Meter, Voltage Detectors, Infrared Thermometer, Test Leads, Electrical Insulators Supplier in Pune (MH) India
The document provides product details and ordering information for the Kathrein 860 10149 Integrated Remote Control Unit. It allows operators to control the electrical tilt of compatible antennas remotely. Key details include:
- It is installed internally in selected Kathrein antenna models.
- It provides remote control of the antenna tilt via ethernet, internet, or optional central control unit.
- Specifications include operating protocols, voltage range, adjustment time, temperature range, certifications and dimensions.
- Contact and ordering information is provided for Launch 3 Telecom, the supplier and service provider.
1. Mobile Stroke Unit
Acting FAST
when tools, time and safety
matter most
Commitment
Committed to providing the best
solution for each job, Frazer, Ltd.
designed one of the first Mobile
Stroke Units in the country. Leaping
ahead of the competition, Frazer has
engineered safety to the extreme.
With multiple patents pending, Frazer
tested the unit for stability in a
collision. The CT scanner mounting
and retention system was subjected
to 150% of the SAE J3043 testing
requirement and still resulted in NO
DAMAGE. Engineered for life, the
Mobile Stroke Unit offers critical time,
work space and safety.
2. www.FrazerBilt.com
email: sales@frazerbilt.com
Toll Free: (888) 372-9371
Time
It is estimated that a stroke occurs every 40 seconds. With the
Mobile Stroke Unit, paramedics have the equipment and space
to perform CT Scans on site. The unit is long enough the tech
can stay in the unit while performing the scan adding
convenience for the tech and comfort for the patient. Information
in hand, the hospital knows the facts; whether it is a stroke and
what type of stroke.
Work Space
With more than 30 years of experience building emergency
vehicles, Frazer knows the importance of space and storage.
The Mobile Stroke Unit hosts two workstations; a flat surface by
the rear door and a fold down table by the side door. Along with
configurable cabinets, additional storage can be found in the
CPR seat and in the squad bench.
Safety
Many safety measures have been engineered and implemented
to promote successful operations on scene, in transit and during
the unexpected collision. With patents pending, Frazer has
developed a one of a kind ratchet system to stabilize the cot
while the patient is maneuvered to the CT Scan. More patents
pending, the CT scanner is secured during transit with multiple
levels of security designed for the unexpected collision. The first
being the bolting system keeping the scanner in place, next the
steel enclosure in the unexpected event the unit comes loose,
and then the cargo netting to catch any falling debris.
HOSPITAL GRADE FLOORING
RATCHET SYSTEM
SAFETY CHOCKS
INTEGRATED CT SCANNER
REFRIGERATOR
STORAGE
STORAGE
CONFIGURABLE CABINETS
TELEMEDICINE CAPABILTIES
REAR I/O COMPARTMENT
DIFIBRILATOR MOUNT
OXYGEN OUTLETS
CT Scanner
● CereTom by Samsung Neurologica
● Dedicated electrical circuit
● Patent Pending on ‘scanner anchoring
system”
● Custom designed antifriction nylon
inserts with quick release pins
● Laser leveled floor
● Crash Tested Steel Enclosure with
cargo netting
● Up to 2 hours of internal battery power
● Automatically charges while the truck
or generator are in use
For a full list of features, contact the Sales Department.
Exterior
● Remountable
● 14 ft module: 168” x 96”
● 57.0kW Onan commercial gasoline
generator for full, independent power to
the patient module with 2011 EPA
certification for small engine emissions
● 120VAC to 12VDC regulated,
continuous duty, power supply in
concert with Onan generator, provides
module 12VDC power without drawing
from the chassis alternator/battery
system
●100% LED Lighting
Interior
● 14 ft. module: 71.5” headroom
● 100% LED lighting
● Optional 6 point, SAE J3026
harnesses
● Quad 120VAC electrical outlet at
action wall
● 120VAC air conditioner/heater with
digital thermostat, and dual air outlets,
meets 2010 EPA requirements
● 2 way intercom w/camera to
communicate between the patient
compartment and the cab
● designed to support other imaging
systems with modifications to adapt to
specific equipment footprint.
5. Chassis Features
● Designed to fit a variety of 14’ models and manufacturers
● Liquid spring suspension system
● Powder coated, six position aluminum center console
with integrated switch panel and adjustable radio
mounting panels
● 200 watt siren with two 100 watt speakers
● Heat shielding to protect module from diesel exhaust
regeneration
● Four 4”x3” intersection & grille LEDs; choice of colors
● Optional 4-wheel drive
Standard Exterior
● Remountable
● Ultra strong base frame with 3” x .188” channel and
tubing. welded. dual structural aluminum tubes on all
sides and top for maximum strength
● 2160 matic electric step at side entry door
● 21” deep exterior storage compartment
● External compartments for electrical, air conditioner, and
generator
● Four pre-run RG58U coax cables
● Tinted, double-pane, insulated, sliding windows
● Driver’ side rear storage large enough for SCBAs and
bunker gear
● 30+ Whelen “M” Series, 6” x 4” LEDS with chrome
bezels
Interior Features
● 14 ft. module: 71.5” headroom
● Vacuum formed cushions attached with heavy duty
magnets
● Optional 6 point, SAE J3026 harnesses
● 100% finyl Lonseal flooring; medical grade
● Quad 120VAC electrical outlet at action wall
● 54’ x 20” action area countertop with hinged access
panel to back of oxygen outlets and switches
● 120VAC air conditioner/heater with digital thermostat,
and dual air outlets, meets 2010 EPA requirements
● Ten LED interior lights
Technology
● Telemedicine capabilities
● 2-way intercom with camera to communicate between
the patient compartment and the cab
● Imaging Equipment, configurable space and security
features
● Optional back-up camera
CT Scanner
● CereTom by Samsung Neurologica
● Dedicated electrical circuit; self-powered up to 2 hours
● Patent Pending on ‘scanner anchoring system”
● Laser leveled floor
● Steel frame encloser with cargo netting
Generator & Electrical Features
● 57.0kW Onan commercial gasoline generator for full,
independent power to the patient module with 2011 EPA
certification for small engine emissions
● 120VAC to 12VDC regulated, continuous duty, power
supply in concert with Onan generator, provides module
12VDC power without drawing from the chassis
alternator/battery system
www.FrazerBilt.com
email: sales@frazerbilt.com
Toll Free: (888) 372-9371 For a full list of features,
contact the Sales Department.
HOSPITAL GRADE FLOORING
RATCHET SYSTEM
SAFETY CHOCKS
INTEGRATED CT SCANNER
REFRIGERATOR
STORAGE
STORAGE
CONFIGURABLE CABINETS
TELEMEDICINE CAPABILTIES
REAR I/O COMPARTMENT
DIFIBRILATOR MOUNT
OXYGEN OUTLETS
Crash Test Certified
In 2016, the CT scanner mounting and retention system
successfully passed the SAE J3043 (Ambulance Equipment
Mount Device or Systems) certification test. The test simulated
both a frontal and side impact and resulted in no damage to the
module or mounting and retention system. To further prove its
strength, the CT scanner mounting and retention system was
subjected to 150% of the SAE J3043 testing requirement and
still resulted in no damage. All testing was conducted by an
ANAB accredited environmental testing facility.
8. www.FrazerBilt.com
email: sales@frazerbilt.com
Toll Free: (888) 372-9371
Chassis Features
● A variety of 14’ models and manufacturers
● Liquid spring suspension system
● Optional 4-wheel drive
Standard Exterior
● Remountable
● Ultra strong base frame with 3” x .188” channel
and tubing. welded. dual structural aluminum tubes
● Four pre-run RG58U coax cables
● Tinted, double-pane, insulated, sliding windows
Interior Features
● 14 ft. module: 71.5” headroom
● Optional 6 point, SAE J3026 harnesses
● Quad 120VAC electrical outlet at action wall
● 120VAC air conditioner/heater with digital thermostat, and dual air
outlets, meets 2010 EPA requirements
Technology
● Telemedicine capabilities
● 2-way intercom with camera to communicate between the patient
compartment and the cab
● Optional back-up camera
CT Scanner
● Dedicated electrical circuit; self-powered up to 2 hours
● Patent Pending on ‘scanner anchoring system”
● Laser leveled floor
Generator & Electrical Features
● 57.0kW Onan commercial gasoline generator for full, independent power
to the patient module with 2011 EPA certification for small engine
emissions
● 120VAC to 12VDC regulated, continuous duty, power supply in concert
with Onan generator, provides module 12VDC power without drawing
from the chassis alternator/battery system
For a full list of features, contact the Sales Department.
In 2016, the CT scanner mounting and retention system successfully
passed the SAE J3043 (Ambulance Equipment Mount Device or
Systems) certification test. The test simulated both a frontal and side
impact and resulted in no damage to the module or mounting and retention system. To
further prove its strength, the CT scanner mounting and retention system was subjected to
150% of the SAE J3043 testing requirement and still resulted in no damage. All testing was
conducted by an ANAB accredited environmental testing facility.
Crash Test Certified