This document provides specifications for bag components of three bag sizes - Mini, Medium, and Large. It specifies dimensions and tolerances for the bag shell, bottom board, turntop, side seam, patch paper, handles, bag graphics, and general dimensions. Dimensional tolerances are specified as ±1/8 inch unless otherwise noted. The document includes diagrams and notes intended to ensure dimensional consistency and quality for bag production.

1. “WHAT TO WATCH FOR”
Dimensional tolerances are ±1/8”
unless otherwise specified.

2. WRIGHT PACKAGING
LARGE
WR-950
MEDIUM
WR-949
MINI
WR-948
2
“WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.

3. WRIGHT
PACKAGING
BAG COMPONENTS
6 Handles
5 Patch Paper
4 Side Seam 3 Turntop
1 Shell
7 Bag Graphics
2 Bottom Board/
Bag Bottom 8 General Dimensions
3
Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”

4. WRIGHT PACKAGING
1 Shell
• 80# Smurfit Stone Kraft Paper
• Inside of shell is 100% ink coverage.
• Color refer to sample board.
4
“WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.

5. WRIGHT
PACKAGING
2 Bottom Board/
Bag Bottom
• Bottom board to be 500 gsm.
• 100% ink coverage on bottom board
• Bottom board tipped into bag.
• 1/8” ± 1/16” stripe on bag bottom flap.
• Refer to sample board for bottom board and stripe color.
1/8” Stripe -1/16”
+1/16”
5
Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”

6. WRIGHT PACKAGING
3 Turntop
• Targeted gap between top of turn to printed border
is 1/8” ± 1/16”
1/8” -1/16”
Top of Bag
+1/16” Turntop Shell
Turntop Border
1-1/8” -1/16”
+1/16”
1-3/8” 2”
Patch Paper
See Specifications
for Bag Height by Size
1/16” Gap 1/8” Gap (Target) 3/16” Gap
Turntop border color CAN NOT
coincide with the top of the bag.
Turntop border color CAN NOT roll
over onto the front of the bag.
6
“WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.

7. WRIGHT
PACKAGING
4 Side Seam
• Seam exposure is 1/8” ±1/16”
Side Seam
Glue Flap
1/8” -1/16”
+1/16”
Gap
7
Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”

8. WRIGHT PACKAGING
5 Patch Paper
• Positioned in center of panel between seams.
• Parallel to the turntop.
• Refer to sample board for color.
• Refer to sample board for positioning.
//
Parallel
C
L
8
“WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.

9. WRIGHT
PACKAGING
6 Handles
• Twisted red kraft paper
• Refer to sample board for color
• Handle width 4”
• Handle height 3” at top of arch.
• Front and back handle offset per sample board.
• Handle and bag assembly weight tested:
Mini: 6
Medium & Large: 10 lbs
4”
3”
Handles Offset
Thickness of the handle
9
Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”

10. WRIGHT PACKAGING
7 Bag Graphics
• Refer to sample board for gelpop-color, gloss and hardness.
• Refer to sample board for gray type and stripe color.
• Align graphics’ center vertically in the front and back panels.
• Refer to sample board for horizonal positioning.
C
L
10
“WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.

11. WRIGHT
PACKAGING
8 General Dimensions
H
G
W
BAG SIZE P/N W G H
MINI WR-948 8.625 4.500 10.625
MEDIUM WR-949 12.500 5.750 15.500
LARGE WR-950 16.000 6.000 18.750
11
Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”