4. TOILETVERHOGER 3.6
BILL OF MATERIAL
- Sail of 670g/m² *
- 50 cm String
- 2 Sucking cups
- Needle and thread
- Sewing machine
- Jigsaw
- Ruler
- Pencil
- Cutter
- Scissors
* With a little effort the sail can be found for
free as rest material in companies that use these
materials for banners, to protect cargo of
lorries...
6
4
0
5. 1 TOILETVERHOGER 3.6
DESCRIPTION Draw and then cut 134
squares of 10 cm by 10 cm on the sail. These
squares will later be sewn together one by one.
If this is the first time you try to make this, make
some extra to have a try at first.
T1
1h 45’
Ruler, pencil, cutter
Sail
136 sail squares
€0
6. 2 TOILETVERHOGER 3.6
DESCRIPTION Draw lines at 2 and 3
cm from the edge on 68 squares. These will be
the guiding lines for one of the next sewing
steps.
T2
1h
Ruler, pencil
0
68 sail packages
€0
7. 3 TOILETVERHOGER 3.6
DESCRIPTION Take two of the
squares , one with and one without guiding lines.
Sew them together in the middle. Be sure to use
a zigzag sewing pattern of more or less 0,5 cm
wide. By using this zigzag sewing pattern the
overall strength will be improved. Make 68 of
these pairs.
T3
1h
Sewing machine, scissors
Needle and thread
68 sail packages
€ 0,20
8. 4 TOILETVERHOGER 3.6
DESCRIPTION Take two pairs of the
previous step. Sew the top face of one pair to
the back face of the other pair by following the
drawn guiding lines.
No
2h
Sewing machine, scissors
Needle and thread
34 sail packages
€ 0,20
9. 5 TOILETVERHOGER 3.6
DESCRIPTION Continue to connect
the top and back faces of two pairs on the
guiding lines. As the package gets thicker, it gets
harder to sew correctly on the guiding lines.
No
2h 30’
Sewing machine, scissors
Needle and thread
17 sail packages
€ 0,20
10. 5’ TOILETVERHOGER 3.6
DESCRIPTION Continue to connect
the top and back faces of two pairs on the
guiding lines. As the package gets thicker, it gets
harder to sew correctly on the guiding lines.
No
2h 30’
Sewing machine, scissors
Needle and thread
17 sail packages
€ 0,20
11. 6 TOILETVERHOGER 3.6
DESCRIPTION Sew the edges of each
pair made in step 3 together.
T4
2h
Sewing machine, scissors
Needle and thread
All sail squares
€ 0,20
12. 6’ TOILETVERHOGER 3.6
DESCRIPTION Sew the edges of each
pair made in step 3 together. When stretching
the squares, you can see a honeycomb structure.
Make three packages, equal in thickness. This
makes it easier to execute the next step.
T4
2h
Sewing machine, scissors
Needle and thread
All sail squares
€ 0,20
13. 7 TOILETVERHOGER 3.6
DESCRIPTION Cut the groove out of
the three finished packages of the previous step.
Use preferably a band saw, if not available try
using a jigsaw or cutter.
T5
30’
Ruler, pencil, jigsaw
0
0
€0
14. 8 TOILETVERHOGER 3.6
DESCRIPTION Sew the three packages
together the same way as in step 5 and 6.
No
20’
Sewing machine, scissors
Needle and thread
3 Sawed packages
€ 0,05
15. 9 TOILETVERHOGER 3.6
DESCRIPTION Make a loop at both
ends with a string through the last honeycomb
gap. Attach a sucking cap to each string.
These sucking caps will be used to hold the toilet
seat raiser during use.
No
15’
Scissors
String, 2 sucking caps
2 sucking caps
€1
16. 10 TOILETVERHOGER 3.6
DESCRIPTION This is what it should
look like in the end.
No
-
-
-
-
-
17. 11 TOILETVERHOGER 3.6
DESCRIPTION This is what it should
look like when it is stretched.
No
-
-
-
-
-
19. U1 TOILETVERHOGER 3.6
DESCRIPTION The toilet seat raiser is
that compact that it fits in one hand. You can
take it subtle with you in a (self made) handbag.
5”
Toilet seat raiser
20. U2 TOILETVERHOGER 3.6
DESCRIPTION Lift the toilet seat and
place the toilet seat raiser on top. The seat fits in
the groove.
5”
Toilet seat raiser, toilet seat
21. U3 TOILETVERHOGER 3.6
DESCRIPTION Pull with both hands at
both ends of the honeycomb structure. Arrange
the toilet seat raiser evenly over the seat.
20”
Toilet seat raiser, toilet seat
22. U4 TOILETVERHOGER 3.6
DESCRIPTION Hold while you drop
the toilet raiser and toilet seat.
20”
Toilet seat raiser, toilet seat
23. U5 TOILETVERHOGER 3.6
DESCRIPTION Fix the toilet seat raiser
at the toilet seat or cap with the two sucking
caps .
15”
Toilet seat raiser, sucking caps, toilet seat
24. U5’ TOILETVERHOGER 3.6
DESCRIPTION The best way to fix is
to make a cross with the two cords of the
sucking caps .
15”
Toilet seat raiser, sucking caps, toilet seat
25. U6 TOILETVERHOGER 3.6
DESCRIPTION
enjoy!
Feel safe to use and
Depends on your needs
Toilet seat raiser
26. U7 TOILETVERHOGER 3.6
DESCRIPTION Use water and soap to
disinfect and clean the toilet seat raiser. Let it
dry before the next use.
2’
Toilet seat raiser, water, soap
28. T1 TOILETVERHOGER 3.6
DESCRIPTION Dimension of
sail squares.
the 138
If the toilet raiser has to be higher or lower, vary
one side to the length that results in the desired
height. The real height of the raiser will be 3 cm
less than the chosen length of the side.
For example: if you want an elevation of 9 cm,
you need to cut a square of 10 by 12 cm.
The wide of the raiser always stays 10 cm.
10 cm high
10 cm wide
29. T1’ TOILETVERHOGER 3.6
DESCRIPTION If the top corners are
to sharp to sit on, they can be rounded.
R 1 cm
10 cm high
10 cm wide
30. T2 TOILETVERHOGER 3.6
DESCRIPTION
guiding lines.
Positioning of the
10 cm high
2 cm 1 cm
10 cm wide
31. T3 TOILETVERHOGER 3.6
DESCRIPTION
middle guiding line.
Positioning of the
10 cm high
5 cm
10 cm wide
32. T4 TOILETVERHOGER 3.6
DESCRIPTION Positioning of the edge
guiding lines.
10 cm high
0,5 cm
10 cm wide
33. T5 TOILETVERHOGER 3.6
DESCRIPTION
groove.
Dimensions of the
10 cm high
8 cm
2 cm
1 cm
10 cm wide