Muhammad Shafique is a mechanical engineer from Pakistan with over 22 years of experience in project management, maintenance engineering, and workshop supervision. He has worked on projects in Saudi Arabia, Qatar, Bahrain, and other countries for major clients like Saudi Aramco, SABIC, and RasGas. Currently he works as a senior piping engineer for Descon Engineering in Qatar.

1. MECHANICAL ENGINEER
MUHAMMAD SHAFIQUE
: m.shafiq438@gmail.com
: +971507067862,+923004384689
Skype Id: shafiq.descon
U.A.E.
 Intended to work in a challenging and competitive environment with middle level
assignments in an EPC Company with repute and class, where strong sense of
responsibility and commitment are required, where dignity of work provides job
satisfaction and the place of work provides potential avenues for learning, growing
and achieving goals of the company.
 22 years of professional working experience in Project management, Shutdowns,
Mechanical workshops as a Piping Engineer,Workshop Engineer, Maintenance
Engineer, Shutdown Engineer, Material Engineer, Site Engineer, Equipment
Engineer, Mechanical Engineer across world class projects with Clients:
PETROKEMYA, SAFCO DAMMAM, SASREF –Jubail, SADAF-Jubail, SHARQ-Jubail,
SAMREF(YANBU, IBN SINA Jubail, NIGC Jubail, IBN ZAHR TURN AROUND MTBE
PLANT, ANDAR CEMENT PLANT, SWCC PROJECT [Jubail, SAMAD Jubail, JANA SAUDI
JOINT STOCK COMPANY Jubail, GULF PETRO CHEMICAL IND. BAHRAIN, SABIC
INDUSTRIAL COMPLEX RIYADH, SAMARC / SAUDI ARAMCO REFINERY, RASGAS,
QChem.
• Diploma of Associate Engineering Mechanical 1992 from Punjab Board of
Technical Education, Lahore.
• Matric with Science 1989 from Lahore Board
TRAININGS:
• General piping system special training course from Pak German Technical Training
Center, Lahore 1990.
• Permit acceptance course from KSA.(under Saudi Aramco)
1
EDUCATIONAL QUALIFICATION:
OBJECTIVE
PROFILE

2. MECHANICAL ENGINEER
SERVICE APPRECIATION.
 Olayan Group Long Service Appreciation Award On March 5, 1998.
(On Completion of 5 Years)
 Olayan Group Long Service Appreciation Award On December 2003.
(On Completion of 10 Years)
 Safety Appreciation Certificates During Shutdowns and Projects.
 Job Appreciation Certificates after Shutdown Activities and Projects.
 Currently working as a Senior Piping Engineer in Descon Engineering for Qatar
Petroleum in T/A 2015
 Senior Piping Engineer in Descon Engineering for Qatar Chemical Company Ltd
in TurnAround2015 (Jan-Mar 2015 )
 Responsible for Executing the Cut and Weld & TWR (Technical
Work Request) Jobs of Piping and Supports.
 Workshop Engineer in Descon for our Client RAS GAS BARZAN EPC PROJECT
Qatar (3 years from 15 May 2012 to Dec 2015)
 Supervised everyday activities and ensured maximum productivity in
fabrication of piping and structures.
 Supervise workshop machining jobs including radial arm drills, milling
machines, centre lathes, dynamic balancing machines and valve test
benches.
 Assist the Workshop Manager in managing the daily operations.
 Lead the team in achieving best possible workshop quality and execute
all jobs according to customers’ requests.
 Handle customer’s feedback.
 Workshop Incharge in Universal Engineering, Lahore.(2009-2012)
 Involved in Managing different types of fabrication and
Machining works.
2
PROFESSIONAL EXPERIENCE

3. MECHANICAL ENGINEER
 Workshop Incharge in Modern Continental Contruction Company, KSA (2007
to 2009)
 Duties will include but are not limited to tasking and supervision of
the following areas in Fabrication , Mechanical maintenance , Sand
blasting and Spray painting.
 Workshop Incharge in M. Hussain Engineering Works, Lahore. (2002 to 2007)
 To ensure that production and productivity are maintained in
accordance with work schedules.
 Monitor and action field faults and non compliances.
 Scheduling mobilization/demobilization equipment and service
delivery provisions.
 Manage the maintenance of workshop facilities and fixed equipment.
 Workshop Engineer in Olayan Descon Industrial Company, KSA(1993 to 2002)
 Manage, organise and control an efficient mechanical engineering
workshop including the management of Technicians and Graded
Workers.
 Manage, plan, control and organise the planned preventative and
corrective mechanical maintenance of equipment in order to maximise
their lifespan and ensure safety. This involves monitoring the
performance of mechanical plant and machinery, ensuring remedial
work is undertaken to prevent failure/loss of the plant and equipment
and the production of job sheets and allocating the work on a daily basis
to the Mechanical Technicians, monitoring progress and inspecting
completed work to ensure the required standards are achieved.
 Manage / provide a mechanical installation, fabrication and
maintenance facility.
 Responsible for major installation or maintenance projects, leading the
team of Technicians assigned to the task. Provide a mechanical
engineering advisory service.
 Manage unplanned work resulting from breakdown and emergencies,
making sure they are dealt with in efficient manner by prioritizing as
required for the provision of a 24 hour callout service.
 Create & maintain a register of all workshop equipment to manage the
timely calibration and maintenance of this equipment. Ensure all lifting
3

4. MECHANICAL ENGINEER
gear and workshop equipment is maintained to the highest possible
standard.
 Manage the administration of the mechanical workshop. Ensure all log
books and departmental records are effectively maintained to enable
stock control, ordering of parts and all other workshop functions
operate efficiently.
 Work within the Workshop on a regular basis, to retain/update
mechanical skills & knowledge. Be prepared to step in and assist
Mechanical Technicians in times of emergencies & undertake on the job
training with Mechanical Technicians should it be required.
Also Attended Projects and Shutdown for our various Clients as follows:
1.
 Position: Site Engineer
 Client: IBN ZAHR (2001-2002)
 Attended Boiler Erection (Project 6 months and 2 Months Shutdown)
 Duration: 8 Months
2.
 Position: Site Engineer
 Client: JANA SAUDI JOINT STOCK COMPANY( 2002)
 Fabrication and Erection of Storage Tank ( Fire Water and Chemical)
10000
Cubic Metre.
 Duration: 4 Months
3.
 Position: Site Engineer
 Client: NAMA CHEMICALS, SAUDI ARABIA (2002)
 Modification works of Reactor and Heat Exchanger.
 Duration: 4 Months
4.
 Position: Maintenance Engineer
 Client: SAUDI HADEED (1997,2001,2005)
 Attended 2 Months TurnAround in the Above mentioned year in the
Fabrication Works and Plant Maintenance
 Duration: 6 Months
4

5. MECHANICAL ENGINEER
5.
 Position: Maintenance Engineer
 Client: SAUDI CEMENT COMPANY (1998)
 Responsible of Maintenance of Eqipment and pipeline
 Duration: 3 Months
6.
 Position: Mechanical Engineer
 Client: SAUDI ARAMCO REFINERY RIYADH,JEDDAH, HOFUF (1994)
 Attended 2 Months SHUTDOWN in the Above mentioned year in the
Fabrication of Piping, Structures and Plant Maintenance.
 Duration: 6 Months
7.
 Position: Maintenance Engineer
 Client: SAFCO (1999)
 Maintenance of Heat Exchanger and Column.
 Duration: 2 Months
8.
 Position: Maintenance Engineer
 Client: SADAF , SAUDI ARABIA (1998,2000,2006)
 Equipment Maintenance ( Heat Exchanger, Column, Filter, Fin Fan)
 Duration: 7 Months
9.
 Position: Maintenance Engineer
 Client: AR-RAZI SAUDI METHANOL
COMPANY(1997,1998,2001,2004,2005)
 Maintenance of Furnace and Valves.
 Duration: 8 Months
10.
 Position: Maintenance Engineer
 Client: SABIC INDUSTRIAL COMPLEX RIYADH 1995
 Fabrication and Erection of Fire Fighting System
 Duration: 3 Months
11.
 Position: Maintenance Engineer
 Client: IBN AL BAYTAR FERTILIZER (1997,1998,2003)
5

6. MECHANICAL ENGINEER
 Conveyor and Duct Installaion
 Duration: 7 Months
12.
 Position: Maintenance Engineer
 Client: PETROKEMYA (2000)
 Valve Replacement and Nozzle modification and testing of Heat
Exchanger and Column.
 Duration: 1.5 Months
13.
 Position: Plant Maintenance Engineer
 Client: GULF PETRO CHEMICAL IND. BAHRAIN(2000,2005)
 Fabrication, Erection and Modification works of Piping in Utility and
Ammonia Area.
 Duration: 3 Months
14.
 Position: Maintenance Engineer
 Client: SAMAD Jubail (1999)
 Replacement of Cement Duct and Pipeline.
 Duration: 1 Month
15.
 Position: Site Engineer
 Client: ANDAR CEMENT PLANT(2002)
 Attended 2 Months TurnAround in the Above mentioned year in the
Fabrication Works and Plant Maintenance
 Duration: 2 Months
16.
 Position: Mechanical Engineer
 Client: SHARQ Jubail (1993,1998,2002)
 Responsible for Provision of Material and Equipment for fabrication,
Maintenance of Pipelines, Structure, Heat Exchanger and Vessels in
Turn Around
 Duration: 5 Months
17.
 Position: Maintenance Engineer
 Client: SAMREF(YANBU)(1995,1997)
 Responsible for replacement of Pipeline and Hydrotest.
6

7. MECHANICAL ENGINEER
 Duration: 3 Months
18.
 Position: Maintenance Engineer
 Client: NIGC Jubail(1994,1996)
 Involved in Overhauling of Compressor, Heat Exchanger and Valves.
 Duration: 2 Months
19.
 Position: Maintenance Engineer
 Client: IBN ZAHR TURN AROUND MTBE PLANT (2001)
 Fabrication Incharge
 Duration: 3 Months
20.
 Position: Maintenance Engineer
 Client: SWCC PROJECT [Jubail (2000)
 Fabrication works of Piping and Structures
 Duration: 1.5 Months
PERSONAL DETAILS:
Name : MUHAMMAD SHAFIQUE
Father’s Name : MUHAMMAD HUSSAIN
Date of Birth : 15-JAN-1972
Passport No : AQ5183381
Nationality : PAKISTANI
Marital Status : MARRIED
Languages : English, Arabic , Hindi, Urdu
Permanent Address : H# NE16/6S2 Chowk Shawala Haq Nawazroad
Baghbanpura,
Lahore.
7

8. MECHANICAL ENGINEER
Thanks and Regards,
MUHAMMAD SHAFIQUE
+97466197141
Qatar.
8