Our Research and Development team continually endeavor to evolve with new and energy savings products and meet customer requirements. We have developed new foggers nozzles which operates at high pressure creating very fine mist of 5 to 10 µ which found wide applications viz… Humidification in Green Houses and Textile Industries, cooling in restaurants/cafeterias/cattle farms/chicken farms etc. Mist created is instantaneously evaporated without wetting floor. Thus it gives desired effect of ambient cooling and rise in humidity. Now same application is extended for mist spray support to chiller/AC condenser units. While ambient temperature crosses >35 0C, chiller and AC performance starts deteriorating as compressor discharge temperature and hence pressure increases leading to high load on condenser as well as compressor. Also we chillers shall trip on HP set point. So if air entering to condenser is cooled by mist spray support, naturally chiller performance improves and reduces power consumption.

1. MIST AND COOL SYSTEM (M&CS)
forHumidificationand CoolingforHumidificationand CoolingforHumidificationand CoolingforHumidificationand Cooling
Comfort……Comfort……Comfort……Comfort……
Mist Ressonance Engg. Pvt. Ltd
Pune, India.

2. Contents
•Organizational Introduction
•Introduction to M&CS
•Technology
2
•Technology
•Applications & Benefits

3. Organisation Introduction..
Development : The Mist cooling technology was developed by
our founder Director Late Mr. Arvind S. Chitale in 1980 and was
recognized at various international platforms. We have over
350 installations worldwide and satisfied customers.
Mist Cooling systems are eco-friendly and Energy conservation
is achieved at the highest level.
Factory: We have full fledge manufacturing and testing facilityFactory: We have full fledge manufacturing and testing facility
at Kelawade near Pune and Head office at central place.
Board of Directors:
• Mrs. Madhuri A. Chitale : Managing Director
• Mr. Makarand A. Chitale :
Director – Technical
• Mr. Bhupendra P. Shroff : Director

4. Organisation Introduction..
Satisfied Customers:

5. M&CS Technology
M&CS : consists of specially designed
Misting nozzles available in various
sizes and MOC. Appropriate size is
chosen as per application and
requirement. It uses high quality
double compression type leakproof SS
5
double compression type leakproof SS
fittings.
Technology: water sprayed from
nozzles at high pressure of 70 bar,
instantaneously vaporizes and raises
RH level in atmosphere giving cooling
comfort.

6. Central Pumping Unit: consists of
High pressure pump along with
Control Panel. High pressure pump
delivers pressurized water to piping
and nozzles network and creates mist.
M&CS Technology
6
Water out from misting nozzles
instantaneously evaporates being very
fine tiny particles raising the humidity
levels and cooling down the amb temp.

7. M&CS APPLICATIONS
-
Wine cellar humidification with Misting
A low humidity level is the main factor that
causes natural evaporation of wine.
Moreover wood barrels are subject to dehydration
of their external board structure which
compromises the quality and efficiency in same
time.
A humidity level among 80% and 85% allows
7
A humidity level among 80% and 85% allows
to reduce dramatically the “wine loss".
Super Market Humidification: Misting
systems optimizes Rh, blocking dehydration
process, keeping the freshness of food for longer
time.
Our misting system periodically emit an ultra
light mist of water directly onto the products
periodically & evaporate without wetting,
keeping humidity and coolness in the
environment air, reducing dehydration and
maintaining product weight and condition.

8. Fish Products are also subjects to the loss of
freshness by dehydration, as they are composed of
water in the measure higher than 70%. Moreover,
the misting system can control the spread of
smells in the surrounding areas.
MEAT: Some types of meat and cold cuts are
subjects to dehydration, misting systems can
M&CS APPLICATIONS
8
subjects to dehydration, misting systems can
restore naturally their suitable special
microclimate, to preserve or keep seasoning them.
Refrigerated storage humidification:
cold rooms and refrigerated warehouses, blocking
dehydration process, maintains the freshness of
food for longer time in air, reducing dehydration
and maintaining product weight and condition.

9. -
Fruit and vegetables storage: These are
largely composed of water. The loss of
freshness is mainly due to a quick dehydration
of the product. Water evaporates, due to a
difference between its values contained into
the vegetables and in the surrounding air. By
means of a misting system, the humidity level
in the air re-establishes its optimal values,
blocking the dehydration process
M&CS APPLICATIONS
9
Textile Industries: The yarns, until the
transformation in tissue, must balance
their own moisture and that contained in
the surrounding air. No air conditioned or
with different humidification system always
face difficulties during embroidery, weaving
and spinning of yarns due to breakage and
high static electricity levels.
blocking the dehydration process

10. Paper Industries: The paper-based products
gain and lose moisture rapidly: for this reason a
properly stabilized humidity level is crucial to
obtain an excellent steady quality final
product. A proper humidity level is very
important to the entire printing process. As far as
paper, board and other cellulose-based products,
the best climate is 20-21°C and a relative
M&CS APPLICATIONS
10
the best climate is 20-21°C and a relative
humidity moving from 50% to 55%.
Misting for Air Cooled Condensers: Misting
system can be employed along with air cooled
condensers. While ambient temperature crosses
38 0C, performance of normal Air cooled
condenser deteriorates increasing load on unit
resulting lower cooling performance. Misting
system maintains air temperature for condenser
at desired level giving condenser performance as
close as water cooled condenser at 1/10th of
water consumption as compared to water cooled
condenser.

11. Tobacco humidification
Optimum humidity levels in tobacco plant cure
tobacco leaf moisture content, resulting in
improved final product quality and ensuring
production efficiency. Humidity levels required
are 55% to 75%.
M&CS APPLICATIONS
11
Green House Humidification: Misting
systems (or Fog systems) play an important
role in the greenhouse climatic control. In
summertime the quick evaporation of the
fog will cool the greenhouse due to the
principle of evaporative cooling, meanwhile
it humidifies the environment in case of low
relative humidity. Green house products
with humidification system yields in better
product qualities with better life as well.

12. Home Gardens.
This can be used at home Gardens for
maintaining cooling and comfort and raise
humidity levels which shall be benefit plants
for healthy.
M&CS APPLICATIONS
12
Open Restaurants:
This is used at open restaurants for
maintaining cooling and comfort.

13. We are here
Thank You……..
13
Mist Ressonance Engg. Pvt. Ltd.
'Anandi', 1304/1/7, Shukrawar Peth,
Bajirao Road, Pune 411002 INDIA
Tel :(+91 20) 24472726, 24471184
Fax :(+91 20) 24474972
E-mail : mistcool@vsnl.com / mistcreation@gmail.com
Website : http://www.mistcreation.com/
We are here