RACK CLAD WAREHOUSE

1. NEXTMHE Engineering Private Limited
I info@mhenext.com I +91.7506504540/41/42 I www.mhenext.com I
RACK CLAD WAREHOUSE
Clad Rack warehouses can be made up of any type of storage system as their main feature is major works of
engineering in which the racking itself forms part of the construction of the building together with side and
roof cladding. The ranking structure supports not only the actual goods and the different building elements but
also the thrust of the handling devices and external elements: winds, heavy snowfalls, seismic movements,
etc.
This is the reason why clad warehouses represent the concept of optimum use of a warehouse: in the
construction process, first the racking is assembled, and then the building envelope is built around this
structure until the warehouse is complete.
The highest density storage solution possible for nearly every type of pallet rack,this method of building
construction reduces construction costs, lead times and minimizes the building footprint.
Most clad rack buildings are equipped with automated systems and robotic equipment for the handling of
goods, especially of if they are multitier.
The maximum height of clad-rack buildings is limited by local standards and by the reach height of stacker
cranes or fork-lift trucks. Warehouses of more than 40 m high can be built.
An NEXT Rack-Clad building is the most economic storage solution when a new building is required.MHE
Although AS/RS applications are the most common type of rack supported building, other racking systems
such as selective pallet racking ,Drive-In and Push-Back are also available. When land is at a premium and an
accelerated construction schedule is required, a rack supported building is the optimal choice.

2. NEXTMHE Engineering Private Limited
I info@mhenext.com I +91.7506504540/41/42 I www.mhenext.com I
Advantages :
 Turnkey solution
 Storage at high height, enables maximum use of available surface area without wastage of space.
 Utilizes height instead of land mass
 Allows a wide range of goods to be stored.
 Eliminates building columns since rack supports the structure
 Can be built at heights over 130 feet
 Conventional or automated systems can be used.
 Inclement weather and seismic conditions have minimal impact on the building
OTHER ADVANTAGES :
Full use of the surface area
The warehouse is designed at the same time as the racks only occupy the space required, without
intermediate pillars that influence their distribution.
Optimisation of Height
As with the surface area, the height will be only that which is required. At the same time, the upper trusses or
girders require less height and incline being directly supported on the racking.
Maximum height of the construction
You can build to any height, it only depends on local regulations or the scope of the handling means which are
used, being able to exceed 45m high (which would be complex and expensive in traditional construction).
Simpler construction
The entire structure is assembled on a concrete slab of suitable thickness to achieve uniform distribution of the
forces on the foundation; there isn’t a high concentration of loads.
Less time for completion
Once the slab is built, the entire structure and cladding are progressively and concurrently installed.
Cost savings
As a general rule, the cost of a clad-rack warehouse is less than the more traditional racks. The greater the
construction height, the more profitable the clad-rack system.

3. NEXTMHE Engineering Private Limited
I info@mhenext.com I +91.7506504540/41/42 I www.mhenext.com I
Minimal civil works
it only requires the construction of the slab on the ground and, in some cases, a waterproof wall between one
and two metres high. In which case the operations area needs to be expanded for receipt and dispatch, a
traditionalbuilding can be built, but of sufficient height without reaching the total height of the warehouse.
Easily removable
Being a structure formed by standard rack elements that come pre-assembled or bolted, they can be
dismounted with ease and a high percentage of components recovered.
Some Pictures for the Reference
In case you are interested in building RACK CLAD WREHOUSE please contact us
MHE NEXT Engineering Private Limited
Plot no-1 , Sector- 7 ,
1101 , Shivshankar Plaza –II
Airoli -400708 , Navi Mumbai , Maharashtra INDIA
Contact Person : dhanaji SAWANT – managing director
Mobile: +91.9769798900
E-mail : Dhanaji.sawant@mhenext.com/info@mhenext.com