Mechanical Supervisor

SINGH CHANDRA PRATAP
Harilok Society,
At & Post: Bajwa.
DIST: BARODA Pin- 391310.
GUJARAT, (INDIA).
E-mail cpsinghrjpt@hotmail.com
Contact No: - (India)-00919662576988
(Qatar)-0097477201761
To,
HRD………………………..
Subject: - Application for the post of MECHANICAL SUPERVISOR.
Dear Sir,
I would like to apply for the post of MECHANICAL SUPERVISOR having worked in
the field of mechanics I believe I have the capabilities and the skill to perform the tasks associated with
the job.
I seek employment with your esteemed organisation for the post of MECHANICAL
SUPERVISOR. I sure you that if you give chance to serve in your organization. I will prove to be
symbol of professional competence, dedication, cheerfulness and devion to duty.
I am looking forward to such an opportunity, and as I have done in the past, I will put my
effort and dedication to insure the job is done efficiently, timely, and with quality. I believe that both
my skills and personal attributes match the requirements you seek for this role and that I would be able
to effectively contribute to the team and the organization.
I would appreciate the opportunity to meet with you to discuss my application and look
forward to hearing from you soon. I hope that on consideration of my CV you will be persuaded of my
potential to perform well on this position and to make a real contribution as a member of your firm
I hereby declare that the information given above is true to the best of my knowledge and belief.
Yours sincerely
1

CURRICULUM VITAE
Harilok Society, at & Post: Bajwa.
DIST: BARODA. Pin- 391310.
GUJARAT, (INDIA).
E-mail cpsinghrjpt@hotmail.com
Contact No: - (India) 0091-9662576988
(Qatar)-0097477201761
Technical Qualification : Diploma in MECHANICAL ENGINEERING
Designation : MECHANICAL SUPERVISOR
CAREER OBJECTIVE:-
To work as a MECHANICAL SUPERVISOR Position in the field of Petrochemicals, Oil & Gas
and to EXPLORE my KNOWLEDGE, ENHANCE my SKILLS and become INNOVATIVE in the
field of my expertise and use it in order to BENEFIT the NATION the COMPANY and MYSELF, and
can work in different condition and believe in working as a TEAM. Want to work with an organisation
as a TECHNICAL TEAM MEMBER, where there is no CONSTRAIN to give REAL TOUCH to
improve the PLANT PRODUCTIVITY
JOB EXPERIENCE DETAILS:-
Very recently was working with Abu Dhabi Company for Onshore Oil Operations (ADCO) as
Mechanical Foreman looking after all types of works involved in PREDICITIVE, PREVENTIVE
and EMERGENCY MAINTENANCE. Responsible for PM Checks, ROUTINE Maintenance, and
CORRECTIVES of PUMPS, COMPRESSORS and other MACHNIRIES and involved in
COMMISSIONING and PRE COMMISSIONING activities,
Was recently working for QATAR CHEMICALS and PETROLIUM DEVELOPMENT OMAN as
MAINTENANCE TECHNICIAN P.D.O Oil & Gas and LNG is one of the largest and biggest
ORGANISATIONS engaged in OIL & GAS and LNG FIELDS, I have been working in different
companies in INDIA (10 YEARS) on different posts.
Worked in India in very large scale industries like GSFC Baroda, ABS katol, NTPC, IOCL Baroda,
DNL nandesari, GACL ranoli, ONGC mahesana, IOCL Mathura, ONGC gandhar, NTPC kayamkulum,
RIL Surat and Jamnagar, IOCL Baroda,
SKILLS:-
Promote safe workmanship quality and skill to manage the task safely in time.
Skilled to complete the maintenance works on time during shut down projects.
Competence with job instructions, job safety plans, job methods & permit to work system
Maintain quality procedures and day to day co-ordination with client
Maintaining equipment history and Developing job safe practice procedures
Engaged in failure analysis and spares planning and co-ordination with other maintenance disciplines
Giving training to subordinate manpower’s and trainees
2

SPECIAL INVOLVEMENT:-
1. EIA- Equipment improvement activity,
2. RCA – Root cause analysis,
3. TPR – Total product reliability,
4. KPA- Key Performance Indicator,
5. Attending meetings with client,
6. Conducting daily toolbox talks,
7. Commissioning and pre commissioning activities,
8. PREDICITIVE, PREVENTIVE and EMERGENCY MAINTENANCE,
9. MAXIMO (UAE), SAP (Oman) and PTW System,
10. Process Safety operation and Maintenance,
NATURE OF WORK ON ROTARY EQUIPMENTS:-
GAS TURBINE & STEAM TURBINE
Rotor crack checking with D.P. Labyrinth seal Clearance checking & replacement, Journal &Thrust Brg.
Clearance checking & replacement, doing also routine inspection, HGP inspection and also involved in major
overhauling and alignment
Over speed trip device checking & adjustment, Centring of rotor, ESV overhauling, Servomotor, HP/LP valve
overhauling & adjustment
GAS COMPRESSOR
Rotor / Piston crack checking with D.P. test
Journal / Thrust / Big end / Small end Bearing Checking & replacement.
Run out checking Rotor / Piston rod.
Labyrinth clearance checking & replacement replacing dry gas seal
HP & LP seal clearance checking / stuffing Box seal ring clearance checking & replacement.
Piston ring thickness & butt clearance checking
Axial float checking & setting
In built & auxiliary Lube oil pump maintenance.
PUMPS
Shaft run out checking
Wearing clearance checking & replacement
Physically Impeller checking.
Balancing disc checking & replacement
Mechanical seal / gland packing replacement
Bearing checking & replacement
Piston / plunger thoroughness checking
TURBO EXPANDERS:-
Worked for major overhauling and troubleshooting at PDO Qarnalam LNG (Checking follower
clearances, bearing checking & replacement, replacing labyrinth seals, adjusting axial floats)
Worked on following stationary equipment for commissioning, running maintenance & shutdown
maintenance like Heat Exchanger, Reboiler, Condenser, Heater, Condenser Air fin cooler
Also worked on maintenance of Gate valve, Globe valve, Check valve, Needle valve, Diaphragm valve,
Butterfly valve, Plug valve, etc
Familiar in RIG equipment’s like rig engine, Hydraulic and Pneumatic system, Chain block, BOP
(blow out preventer), Hydraulic diverter valve assembly.
Mechanical seal well versed in all types of mechanical seals of manufacturers like
John Crane Durra Metallic, Flowserve etc,
Alignment Rim and Face Method, Reverse Indicator Method (By Using both Graphical and Analytical
Method) and Laser Alignment.
3

WORK EXPERIENCE: - 21 years in INDIA and MIDDLE EAST.
Twenty one years of on hand experience in the field of Mechanical Engineering. Maintenance,
servicing, troubleshooting, shutdowns and commissioning of Oil and Gas, petroleum refinery, chemical
plants, petrochemical, oil & gas field, pharmaceutical industries, fertilizers & Power plants.
Worked with ADCO Abu Dhabi, Q CON Qatar (QCHEM), STS Oman (PDO), Al Hassan Oman
(PDO), Alstom Power India, SIPL India, BHEL India and United Constructions India for erection,
alignment, commissioning, pre commissioning, preventive and predictive maintenance, corrective
maintenance, routine maintenance for all mechanical rotating and static equipment’s,
PRESENT and PREVIOUS EMPLOYERS with LOCATION & DESIGINATION and Time Period
Name Of
Company
Deputed At Country Designation
Working
Period
SEA TEK Qatar Petroleum Qatar Mechanical Supervisor
August 2016
to till date
ADCO Fujairah Terminal UAE Mechanical Foreman
March 2011 to
June 2016
Q CON QATAR Q Chem. Qatar Qatar Mechanical Technician
August 2009 to
Feb 2011
STS OMAN Qarnalam LNG Oman Mechanical Technician
Dec 2006 to
March 2009
AL HASSAN
OMAN
PDO Oman Oman Mechanical Technician
Feb 2003 to
Oct 2006
ALSTOM Power Vadodara (Gujarat) India Mill Wright C/H
July 2001 to
Jan 2003
SIPL Vadodara (Gujarat) India Mill Wright C/H
Dec 1998 to
March 2001
BHEL ONGC (Gandhar) India Mill wright Fitter
April 1997 to
Oct 1998
United
Constructions
ONGC (Mahesana)
DNL (Nandesari)
India Mill Wright fitter
Dec 1995 to
March 1997
Good knowledge in MAXIMO, SAP System, safety rules, working procedures, PTW system as per
OIL & GAS norms, maintenance, troubleshooting, and overhauling Good knowledge of PROCESS
PLANT AND MACHINE RELIABILITY, good COMMUNICATION and man power handling
skills well CONVERGANT with CORRECTIVE MAINTANANCE, EIA, TPR AND RCA
procedures to reduce down time of machines and to increase PLANT REALIBILITY.
COMPUTER KNOWLEDGE:-
MAXIMO, SAP SYSTEM & TRAQS USER, MICROSOFT WORD, EXCEL, POWER POINT, Etc
Computer literate and having experience in estimation of manpower, material, and equipment for
particular jobs, preparing materials, specification and execution of jobs according to existing system.
4

SAFETY COURSES ATTENDED at OMAN, QATAR & UAE
5

Permit Applicant (Signatories) & Permit to Work Course
H.S.E. (Basic) & HSE for Supervisors Course
Heat Stress Awareness Course
Basic life support (first aider) Course
H2S & SO2 Course
SCBA (Self contained breathing apparatus) & RPP (respiratory protection system)
Initial Fire response & Fire Extinguisher Course
Basic Gas Testing & Gas Detection Course
Job Hazard Analysis Course
Safety Fundamentals & PPE Program Course
General Hazcom & Contractor DSR Course
N.O.R.M Awareness & Process Plant Overview & Potential Hazards Course
ESSW & Incident/Near Miss Reporting Course
STOP & QSAFE Training Course
Process Safety Maintenance and operations,
Firefighting auxiliary team member at ADCO Abu Dhabi
ADDITIONAL COURSES ATTENDED at OMAN & QATAR
MAXIMO, SAP System & TRAQS User Course,
TENETS of Operation &OE (Operational Excellence) Course
MSDS (Material Safety Data Sheet) Course
EDMS (electronic document management system) Course
P & IDs (piping & instrument diagram Symbology) Course
Blinding, Confined Space & LOTO (lock out tag out) Course
Familiarisation with OSHA Standards (occupational Safety & health Administration)
PERSONAL DETAILS:-
Father name : Shree Dhrew Deo Singh.
Date of birth : 04/03/1972.
Religion : Hindu.
Nationality : Indian.
Nearest airport : VADODARA, GUJARAT.
Language known : English Gujarati, Hindi & basic Arabic.
Educational Qualification : B.A. Psychology (hons) Eng medium.
Technical Qualification : Diploma in MECHANICAL ENGINEERING,
: ITI (Industrial Training Institute),
Driving License no : 162844 (UAE) GJ06 20100143798 (INDIA) LMV,
Skype ID : singh.rajput3
PASSPORT DETAILS:-
Passport no : N7700084
Date of issue : 8/3/2016.
Date of expiry : 7/3/2026.
Place of issue : DUBAI.
Status : E C N R.
I declare that all the above mentioned information is true in my knowledge,
Yours Truly,
(CHANDRA PRATAP SINGH),
MECHANICAL SUPERVISOR
Desire to Serve, Ability to Perform & Courage to Act
6

Mechanical Supervisor

More Related Content

What's hot

Similar to Mechanical Supervisor

Mechanical Supervisor