The document contains engineering drawings and assembly instructions for a desktop sand casting unit called the Sand-A-Saurus Rex. It includes 11 individual part drawings labeled 101-209 with dimensions and material specifications. It also contains an assembly drawing labeled A2 showing how all the parts fit together, including exploded views for clarity. Key components are the unit shell, press assembly, sand box, linkage assembly and motor/extruder assembly. The document provides details necessary to manufacture and assemble the desktop sand casting machine.
D. First Prototype Engineering Drawings, Pictures, and ImprovementsKurt Zeller
The document contains several technical drawings of components for a small cylindrical electromagnetic drive device, including:
1) Drawings of plates, screws, and rods for mounting a magnetron, dielectric, and movable plate inside the cylinder.
2) Drawings for a rod and guide fixtures to control the position of the movable plate.
3) Drawings for end plates to enclose the cylinder.
This document is a service manual that provides installation, operation, and maintenance instructions for Moyno 2000 pumps models G2 and G3. It outlines the key components of the pumps including the frame, type designation, version designation, and trim code. It also provides details on installation including piping, foundation, and shaft alignment. Sections cover operation, maintenance, troubleshooting, parts lists, and exploded views.
This document provides information about Lamons Gasket Company and their spiral wound gasket product called SpiraSeal gaskets. It discusses the materials, construction, sizes, applications, specifications, and color coding of SpiraSeal gaskets. Lamons specializes in spiral wound gaskets for heat exchangers, pressure vessels and piping and offers custom gaskets to meet specific material, size, pressure and temperature requirements.
- This document contains interpretations from the ASME B16.34 Valves Standards Committee regarding questions on the ASME B16.34 valve standard.
- The interpretations provide clarification on issues such as what qualifies as multi-piece construction, scope of valve sizes, material requirements, and other technical aspects of the standard.
- The interpretations are for committee use only and not to be duplicated or used for other purposes.
This document provides information about thermocouples and RTDs from W. H. Cooke & Co., including:
1. An overview of different thermocouple styles such as bayonet, adjustable compression fitting, not-in-melt, surface, stick-on, and extension cable assemblies.
2. Details on how to order each thermocouple style with specifications like length, calibration type, and termination style.
3. A selection table for determining "A" dimensions of fixed length bayonet thermocouples.
4. Information on related accessories like plugs and jacks, fittings, and mineral insulated thermocouples.
5. Contact information
Dear students get fully solved assignments
Send your semester & Specialization name to our mail id :
help.mbaassignments@gmail.com
or
call us at : 08263069601
Tarazona ofrece varias actividades turísticas alternativas como la recogida de setas e interpretación micológica, espeleología, escalada, bicicleta de montaña y senderismo.
D. First Prototype Engineering Drawings, Pictures, and ImprovementsKurt Zeller
The document contains several technical drawings of components for a small cylindrical electromagnetic drive device, including:
1) Drawings of plates, screws, and rods for mounting a magnetron, dielectric, and movable plate inside the cylinder.
2) Drawings for a rod and guide fixtures to control the position of the movable plate.
3) Drawings for end plates to enclose the cylinder.
This document is a service manual that provides installation, operation, and maintenance instructions for Moyno 2000 pumps models G2 and G3. It outlines the key components of the pumps including the frame, type designation, version designation, and trim code. It also provides details on installation including piping, foundation, and shaft alignment. Sections cover operation, maintenance, troubleshooting, parts lists, and exploded views.
This document provides information about Lamons Gasket Company and their spiral wound gasket product called SpiraSeal gaskets. It discusses the materials, construction, sizes, applications, specifications, and color coding of SpiraSeal gaskets. Lamons specializes in spiral wound gaskets for heat exchangers, pressure vessels and piping and offers custom gaskets to meet specific material, size, pressure and temperature requirements.
- This document contains interpretations from the ASME B16.34 Valves Standards Committee regarding questions on the ASME B16.34 valve standard.
- The interpretations provide clarification on issues such as what qualifies as multi-piece construction, scope of valve sizes, material requirements, and other technical aspects of the standard.
- The interpretations are for committee use only and not to be duplicated or used for other purposes.
This document provides information about thermocouples and RTDs from W. H. Cooke & Co., including:
1. An overview of different thermocouple styles such as bayonet, adjustable compression fitting, not-in-melt, surface, stick-on, and extension cable assemblies.
2. Details on how to order each thermocouple style with specifications like length, calibration type, and termination style.
3. A selection table for determining "A" dimensions of fixed length bayonet thermocouples.
4. Information on related accessories like plugs and jacks, fittings, and mineral insulated thermocouples.
5. Contact information
Dear students get fully solved assignments
Send your semester & Specialization name to our mail id :
help.mbaassignments@gmail.com
or
call us at : 08263069601
Tarazona ofrece varias actividades turísticas alternativas como la recogida de setas e interpretación micológica, espeleología, escalada, bicicleta de montaña y senderismo.
El documento proporciona una introducción al sistema Aranda DASHBOARD, que administra indicadores de gestión de infraestructura TI en tiempo real a través de consultas gráficas. Explica que ofrece una interfaz amigable para visualizar métricas de gestión de incidentes, problemas y cambios. También describe su arquitectura que incluye consultas a una consola web para administradores y usuarios, y notificaciones push. Finalmente, detalla los conceptos básicos de configuración como indicadores, métricas, ítems de configuración, KPI, gr
Dear students get fully solved assignments
Send your semester & Specialization name to our mail id :
help.mbaassignments@gmail.com
or
call us at : 08263069601
Este documento presenta la información sobre un curso de computación dictado los lunes de 15h00 a 18h00 por la Ing. María Juárez. El curso tiene el objetivo de enseñar a los estudiantes a utilizar la computadora como herramienta de trabajo para desenvolverse profesionalmente. Se desarrollará mediante conferencias, trabajo en equipo e individual, prácticas y foros. Los temas a cubrir incluyen conceptos básicos de hardware y software, tipos de archivos, dispositivos, selección de computadoras, virus y antivirus
Rami Abu el fettoh Mahmoud is seeking a challenging position in accounting, finance, or costing to enhance his skills. He has 9 years of experience in accounting roles for telecom, construction, and trading companies. His experience includes accounts receivable, payable, financial reporting, analysis, and cost control. Currently he is the credit control manager for a telecom company with over 3,500 customers, managing credit terms and collections. He is proficient in Microsoft Office and seeks to use his accounting and financial experience to mutually benefit an employer.
This document outlines an SEO strategy and tactics to increase site traffic, leads, search engine rankings, and client revenue. It defines SEO as using techniques to raise a website's organic search ranking by optimizing content, tags, coding, and linking. The strategy includes keyword research, content optimization, technical improvements, and reporting metrics. All tactics are integrated to create a reinforcing marketing ecosystem across channels.
Especificaciones microcarpeta con pol°mero (micro surfacing)emerigal
Este documento proporciona especificaciones detalladas para la conservación de pavimentos mediante la aplicación de microcarpeta con polímero tipo III. Describe los materiales requeridos como agregados, emulsión asfáltica modificada con polímero y relleno mineral. También especifica los procedimientos de calibración de equipo, aplicación de prueba, tratamiento previo de grietas y baches, y los requisitos para la aplicación final como densidad y apariencia superficial. El objetivo es asegurar que el trabajo cumpla con los estánd
Job experiences include consultant work on new media communication strategies related to creativity and art since 2005. Researcher heading two university research projects since 2008 on new visual communication models for industrial and teaching applications. Director of a private institution devoted to studying the creative impacts of new media in culture and how to use technologies as creative tools in schools. Teacher of subjects related to ICT, new media studies, and visual design communication strategies since 2000. The key constants in her work are creativity, art, technology, new media languages, and semiotics.
The document discusses patterns of illicit drug use in the United States. It finds that over 47% of Americans aged 12 or older have used an illicit drug in their lifetime, with marijuana being the most commonly used. It also notes a substantial rise in misuse of prescription drugs like pain relievers, stimulants, tranquilizers, and sedatives among college students between 1993 and 2005. The document classifies and describes different types of drugs like stimulants, depressants, opioids, hallucinogens, inhalants, and cannabinoids. It explains how drugs affect the brain's reward and pleasure centers, as well as factors influencing their effects.
The document discusses the challenges of learning and development including meeting deadlines while juggling competing priorities, establishing credibility through knowledge, reliability and building trust, as well as managing training requests, projects, changes and new technology. It also notes that having the right skills can help one overcome challenges to get the job done.
The document contains a parts list and drawings for a punch die assembly. It includes 16 items in the parts list with details like part numbers, descriptions, materials. The drawings show details of the individual parts and their dimensions, including the upper and lower die, die plate, die punch, guide posts and other components. Tolerances and notes are provided. The assembly is made of materials like steel, cast steel and aluminum.
This document contains design drawings and specifications for a shredder. It includes a bill of materials listing the parts, materials, and quantities. Dimensioned technical drawings show the shredder from multiple views and angles. Key specifications are the gear ratio of 1:173 and that the housing and several internal components are made of ABS plastic, while the shafts and gears are stainless steel.
The document contains assembly drawings for a rack made of sheet metal parts. The drawings include bills of materials and detailed part drawings for the rack sub-assembly, base sub-assembly, and individual parts like the rack, supports, rails, and base plate. Fasteners including bolts, nuts, and washers are also specified for assembling the overall rack structure.
The document contains engineering drawings and part specifications for an assembly consisting of 10 parts: a body, shaft, woodruff key, arm, 3 retainers and screws, a circle plate, 2 circle plate screws, and a handle. The drawings include exploded assembly views, individual part drawings, bills of materials listing each part, quantity, material, and other specifications.
This document is an engineering drawing for a window panel milled from 1/4 inch 6061 T6 aluminum. It includes detailed views labeled A, B, and C along with dimensions and tolerancing information. The drawing was created by Ursula Vold for Los Alamos National Lab and is their proprietary property.
This document contains engineering drawings for the design of a right angle head for a milling machine. It includes detailed drawings showing the exploded view of the assembly, individual part drawings with tolerances and notes, a parts list with materials, vendors and quantities. Dimensioned section views and tolerance information are provided to fully specify the geometry of the components.
This document is an engineering drawing for a window glass frame. It contains details for parts made of 6061 T6 aluminum, including dimensions and tolerances. The drawing also specifies materials, scale, and includes notes about proprietary information.
The document contains technical drawings for metal fabrication parts. It includes four pages of drawings with detailed dimensions, tolerances, notes and title blocks for parts labeled SU-1 and SU-2. Page one for each part provides key side length dimensions. Page two details side holes. Page three lists bottom lengths and page four specifies bottom holes. Precision Metal Fabricators Inc is identified as the drawing author and proprietary owner of the technical information.
The document is an engineering drawing listing the parts, quantities, and specifications for a large pipe support. It includes 7 numbered items with part numbers, descriptions, and quantities. The drawing shows the pipe support from two angles at a scale of 1:5 over two sheets, specifying dimensions in millimeters and tolerances. It was designed by Design Hub.
This document contains a bill of materials and drawings for an assembly called a "Jig Assembly". The bill of materials lists 9 parts including a ring track, support tubes, dome, mounting plate, slider, and sliding mounts. The drawings provide details for each individual part as well as assemblies and subassemblies. Dimensions, tolerances, materials, and other specifications are included.
The document is a design package for an Automated Fusegrade Testing Machine. It includes a bill of materials listing all parts needed to build the machine, as well as drawings and assemblies. The design team certifies that building the machine to the specifications in this package will meet the objectives set by Lexmark International, Inc.
El documento proporciona una introducción al sistema Aranda DASHBOARD, que administra indicadores de gestión de infraestructura TI en tiempo real a través de consultas gráficas. Explica que ofrece una interfaz amigable para visualizar métricas de gestión de incidentes, problemas y cambios. También describe su arquitectura que incluye consultas a una consola web para administradores y usuarios, y notificaciones push. Finalmente, detalla los conceptos básicos de configuración como indicadores, métricas, ítems de configuración, KPI, gr
Dear students get fully solved assignments
Send your semester & Specialization name to our mail id :
help.mbaassignments@gmail.com
or
call us at : 08263069601
Este documento presenta la información sobre un curso de computación dictado los lunes de 15h00 a 18h00 por la Ing. María Juárez. El curso tiene el objetivo de enseñar a los estudiantes a utilizar la computadora como herramienta de trabajo para desenvolverse profesionalmente. Se desarrollará mediante conferencias, trabajo en equipo e individual, prácticas y foros. Los temas a cubrir incluyen conceptos básicos de hardware y software, tipos de archivos, dispositivos, selección de computadoras, virus y antivirus
Rami Abu el fettoh Mahmoud is seeking a challenging position in accounting, finance, or costing to enhance his skills. He has 9 years of experience in accounting roles for telecom, construction, and trading companies. His experience includes accounts receivable, payable, financial reporting, analysis, and cost control. Currently he is the credit control manager for a telecom company with over 3,500 customers, managing credit terms and collections. He is proficient in Microsoft Office and seeks to use his accounting and financial experience to mutually benefit an employer.
This document outlines an SEO strategy and tactics to increase site traffic, leads, search engine rankings, and client revenue. It defines SEO as using techniques to raise a website's organic search ranking by optimizing content, tags, coding, and linking. The strategy includes keyword research, content optimization, technical improvements, and reporting metrics. All tactics are integrated to create a reinforcing marketing ecosystem across channels.
Especificaciones microcarpeta con pol°mero (micro surfacing)emerigal
Este documento proporciona especificaciones detalladas para la conservación de pavimentos mediante la aplicación de microcarpeta con polímero tipo III. Describe los materiales requeridos como agregados, emulsión asfáltica modificada con polímero y relleno mineral. También especifica los procedimientos de calibración de equipo, aplicación de prueba, tratamiento previo de grietas y baches, y los requisitos para la aplicación final como densidad y apariencia superficial. El objetivo es asegurar que el trabajo cumpla con los estánd
Job experiences include consultant work on new media communication strategies related to creativity and art since 2005. Researcher heading two university research projects since 2008 on new visual communication models for industrial and teaching applications. Director of a private institution devoted to studying the creative impacts of new media in culture and how to use technologies as creative tools in schools. Teacher of subjects related to ICT, new media studies, and visual design communication strategies since 2000. The key constants in her work are creativity, art, technology, new media languages, and semiotics.
The document discusses patterns of illicit drug use in the United States. It finds that over 47% of Americans aged 12 or older have used an illicit drug in their lifetime, with marijuana being the most commonly used. It also notes a substantial rise in misuse of prescription drugs like pain relievers, stimulants, tranquilizers, and sedatives among college students between 1993 and 2005. The document classifies and describes different types of drugs like stimulants, depressants, opioids, hallucinogens, inhalants, and cannabinoids. It explains how drugs affect the brain's reward and pleasure centers, as well as factors influencing their effects.
The document discusses the challenges of learning and development including meeting deadlines while juggling competing priorities, establishing credibility through knowledge, reliability and building trust, as well as managing training requests, projects, changes and new technology. It also notes that having the right skills can help one overcome challenges to get the job done.
The document contains a parts list and drawings for a punch die assembly. It includes 16 items in the parts list with details like part numbers, descriptions, materials. The drawings show details of the individual parts and their dimensions, including the upper and lower die, die plate, die punch, guide posts and other components. Tolerances and notes are provided. The assembly is made of materials like steel, cast steel and aluminum.
This document contains design drawings and specifications for a shredder. It includes a bill of materials listing the parts, materials, and quantities. Dimensioned technical drawings show the shredder from multiple views and angles. Key specifications are the gear ratio of 1:173 and that the housing and several internal components are made of ABS plastic, while the shafts and gears are stainless steel.
The document contains assembly drawings for a rack made of sheet metal parts. The drawings include bills of materials and detailed part drawings for the rack sub-assembly, base sub-assembly, and individual parts like the rack, supports, rails, and base plate. Fasteners including bolts, nuts, and washers are also specified for assembling the overall rack structure.
The document contains engineering drawings and part specifications for an assembly consisting of 10 parts: a body, shaft, woodruff key, arm, 3 retainers and screws, a circle plate, 2 circle plate screws, and a handle. The drawings include exploded assembly views, individual part drawings, bills of materials listing each part, quantity, material, and other specifications.
This document is an engineering drawing for a window panel milled from 1/4 inch 6061 T6 aluminum. It includes detailed views labeled A, B, and C along with dimensions and tolerancing information. The drawing was created by Ursula Vold for Los Alamos National Lab and is their proprietary property.
This document contains engineering drawings for the design of a right angle head for a milling machine. It includes detailed drawings showing the exploded view of the assembly, individual part drawings with tolerances and notes, a parts list with materials, vendors and quantities. Dimensioned section views and tolerance information are provided to fully specify the geometry of the components.
This document is an engineering drawing for a window glass frame. It contains details for parts made of 6061 T6 aluminum, including dimensions and tolerances. The drawing also specifies materials, scale, and includes notes about proprietary information.
The document contains technical drawings for metal fabrication parts. It includes four pages of drawings with detailed dimensions, tolerances, notes and title blocks for parts labeled SU-1 and SU-2. Page one for each part provides key side length dimensions. Page two details side holes. Page three lists bottom lengths and page four specifies bottom holes. Precision Metal Fabricators Inc is identified as the drawing author and proprietary owner of the technical information.
The document is an engineering drawing listing the parts, quantities, and specifications for a large pipe support. It includes 7 numbered items with part numbers, descriptions, and quantities. The drawing shows the pipe support from two angles at a scale of 1:5 over two sheets, specifying dimensions in millimeters and tolerances. It was designed by Design Hub.
This document contains a bill of materials and drawings for an assembly called a "Jig Assembly". The bill of materials lists 9 parts including a ring track, support tubes, dome, mounting plate, slider, and sliding mounts. The drawings provide details for each individual part as well as assemblies and subassemblies. Dimensions, tolerances, materials, and other specifications are included.
The document is a design package for an Automated Fusegrade Testing Machine. It includes a bill of materials listing all parts needed to build the machine, as well as drawings and assemblies. The design team certifies that building the machine to the specifications in this package will meet the objectives set by Lexmark International, Inc.
This document is an engineering drawing for an aluminum alloy rim for a BMW 320i. It includes dimensions for a 120mm diameter pitch with M14 x 1.25 bolts and loose counterbores. It also notes the material, scale, and other production details.
This document contains a bill of materials and drawings for a metal fabrication project. It lists 14 items with descriptions and specifications including sheet metal, bolts, handles, and piping materials. Dimensioned technical drawings show views of the assembly with labeled parts, sections, and scales. The fabrication will be completed by Lalitha Metal Fabricators based on drawings approved by the customer.
The documents provide assembly drawings and part drawings for a robot. The main robot assembly consists of subassemblies including a base frame assembly, rear drive assembly, and front drive assembly. The base frame was machined from aluminum on a band saw and mill. Various parts like the rear drive wheel were cut to shape on a mill. The rear drive shaft was turned on a lathe. The documents include detailed drawings and part lists for the assemblies and components.
This document contains a parts list and assembly drawings for various components. The parts list includes 29 items with part numbers, file names, and quantities. The drawings show detailed views including dimensions, hole specifications, and notes for various assemblies and their components. Material information is provided for some items. Revision histories list minor changes to the drawings and parts lists over time.
This document appears to be an engineering drawing containing specifications for a part. It includes dimensions, tolerances, notes and labels for features. Key details include dimensions ranging from 0.408 to 4 inches, a center opening, water outlet, base, and that the material is aluminum. The drawing is scaled 1:1 and contains title block information such as the date, name of designer, and proprietary markings.
This document contains contact information and images from Jason Plumb, a designer and maker based in Colorado. It includes illustrations and designs for architectural features, signage, lighting, and structures for various locations such as bike parks, shops, and other commercial spaces. The designs showcase Jason Plumb's skills in technical illustration, structural engineering, fabrication, and custom metalwork.
This document contains an exploded view drawing of a gyro-generator assembly with 23 labeled parts. It includes the part numbers, descriptions and quantities of each component. The drawing is accompanied by production details such as the client name, reference number, run number, region, date, and drafter information. It also lists serial and stock numbers for the assembled gyro-generator unit.
The document provides information on body repair for a vehicle, including precautions for repairing high strength steel parts, body component parts, body alignment procedures, and descriptions of replacement operations for various body parts. It details markings used for body alignment, procedures for repairing foam and other materials, and specifications for spot welding high strength steel panels.
The document includes an exploded view diagram, bill of materials table, and multiple engineering drawings for an ejector assembly. The exploded view shows the 17 individual parts that make up the assembly and their positioning. The bill of materials lists each of the 17 parts with information like item number, part number, description, material, and quantity. The engineering drawings provide additional views and specifications for several of the individual parts that make up the ejector assembly.
1. 11
13
4
212
6
3
1.25
4.00
4.91
4.809
A
B
8
7
3
4
Note: Exploded Views included on drawing in
order to see dimensions and features that were
not viewable otherwise
3.75
2.07
CL
1/4
1/4
10
5
DETAIL A
SCALE 1 : 2
1/4
DETAIL B
SCALE 1 : 5
ITEM NO. PART NUMBER DESCRIPTION Vendor QTY.
1 202 Unit Shell Midwest Steel And
Aluminum
1
2 206 Sand Box Complete Assembly Midwest Steel and
Aluminum
1
3 207 Linkage Assembly Midwest Steel and
Aluminum
1
4 209 Extruder and Motor Assembly Amazon 1
5 320 Print Reel Amazon 1
6 323 Rod Holder Midwest Steel and
Aluminum
1
7 305 Compaction Plate Midwest Steel and
Aluminum
1
8 306 Cotter Pin McMaster- Carr 4
9 343 T-Rex Right Side Panel Ebay 1
10 344 T-Rex Left Side Panel Ebay 1
11 345 T-Rex Back Side Panel Ebay 1
12 346 Hex Head Bolt 4 McMaster -Carr 8
13 347 Hex Nut McMaster -Carr 8
A A
B B
C C
D D
E E
F F
G G
H H
12
12
11
11
10
10
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
DRAWN
CHK'D
APPV'D
MFG
Q.A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
SURFACE FINISH:
TOLERANCES:
LINEAR:
ANGULAR:
FINISH: DEBURR AND
BREAK SHARP
EDGES
NAME SIGNATURE DATE
MATERIAL:
DO NOT SCALE DRAWING REVISION: 1
TITLE:
DWG NO.
SCALE:1:10 SHEET 1 OF 1
A2
WEIGHT:
Patrick Lindmeier 12/4/2016
101
Desktop Sand Casting Unit
Main Assembly
Sand-A-Saurus Rex
(Group 5) ME333
2. 3.98 TYP
2.65
6.00
5.88 TYP
5.88
5.25 TYP 4.00 TYP
.25 TYP
5.31 TYP
4.94 TYP
2
4
3
1
1/8
1/8 TYP
1/8 TYP
ITEM NO. PART
NUMBER DESCRIPTION VENDOR QTY.
1 331 Side Panel Midwest Steel and
Aluminum
3
2 304 Back Side Panel Midwest Steel and
Aluminum
1
3 311 Side Guide Rail Midwest Steel and
Aluminum
2
4 301 Back Guide Rail Midwest Steel and
Aluminum
1
A A
B B
4
4
3
3
2
2
1
1
Desktop Sand Casting Unit
Unit Shell
DO NOT SCALE DRAWING
202
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:4 WEIGHT:
REVDWG. NO.
B
SIZE
TITLE:
NAME
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN BY:
Smooth
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
Sand-A-Saurus Rex
(Group 5) ME333
Aluminum
Patrick Lindmeier
3. 13.55
1.10
.25
.25
1
2
4
3
ITEM NO. PART NUMBER DESCRIPTION Vendor QTY.
1 322 Rod Eye Midwest Steel and
Aluminum
1
2 319 Press Rod Midwest Steel and
Aluminum
1
3 328 Spring & Stop McMaster-Carr 1
4 323 Rod Holder Midwest Steel and
Aluminum
1
A A
B B
4
4
3
3
2
2
1
1
Desktop Sand Casting Unit
Press Assembly
DO NOT SCALE DRAWING
203
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:8 WEIGHT:
REVDWG. NO.
B
SIZE
TITLE:
NAME
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN BY:
Smooth
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
Sand-A-Saurus Rex
(Group 5) ME333
Aluminum
Patrick Lindmeier
4. 3.63 TYP 3.63 TYP
A
4
3
2
1
1/8 TYP
1/8 TYP
DETAIL A
SCALE 1 : 2
0.25 TYP
0.25 TYP
ITEM NO. PART NUMBER DESCRIPTION Vendor QTY.
1 324 Sand Box Bottom Midwest Steel
and Aluminum
1
2 326 Sand Box Side 1 Midwest Steel
and Aluminum
2
3 325 Sand Box Side 2 Midwest Steel
and Aluminum
2
4 327 Sand Box Holder Midwest Steel
and Aluminum
4
A A
B B
4
4
3
3
2
2
1
1
Desktop Sand Casting Unit
Sand Box Bottom Assembly
DO NOT SCALE DRAWING
204
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:4 WEIGHT:
REVDWG. NO.
B
SIZE
TITLE:
NAME
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN BY:
Smooth
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
Sand-A-Saurus Rex
(Group 5) ME333
Aluminum
Patrick Lindmeier
5. 3.63 TYP
3.63 TYP
A
3
21
1/8 TYP
1/8 TYP
DETAIL A
SCALE 1 : 2
1/8 TYP
1/8 TYP
ITEM NO. PART NUMBER DESCRIPTION Vendor QTY.
1 326 Sand Box Side 1 Midwest Steel
and Aluminum
2
2 325 Sand Box Side 2 Midwest Steel
and Aluminum
2
3 327 Sand Box Holder Midwest Steel
and Aluminum
4
A A
B B
4
4
3
3
2
2
1
1
Desktop Sand Casting Unit
Sand Box Top Assembly
DO NOT SCALE DRAWING
205
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:4 WEIGHT:
REVDWG. NO.
B
SIZE
TITLE:
NAME
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN BY:
Smooth
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
Sand-A-Saurus Rex
(Group 5) ME333
Aluminum
Patrick Lindmeier
6. 3
4
2
2
2
1
ITEM NO. PART NUMBER DESCRIPTION Vendor QTY.
1 205 Sand Box Top Assembly Midwest Steel
and Aluminum
1
2 204 Sand Box Bottom Assembly Midwest Steel
and Aluminum
1
3 318 Placement Rods Midwest Steel
and Aluminum
4
4 306 Cotter Pin McMaster-Carr 4
A A
B B
4
4
3
3
2
2
1
1
Desktop Sand Casting Unit
Sand Box Complete Assembly
DO NOT SCALE DRAWING
206
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:4 WEIGHT:
REVDWG. NO.
B
SIZE
TITLE:
NAME
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN BY:
Smooth
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
Sand-A-Saurus Rex
(Group 5) ME333
Aluminum
Patrick Lindmeier
7. 5
1
7
12
12
1/4
9
13
9
1/8 TYP
1/8
3
12
2
9
10
5
8
11 6
1
13
4
7
ITEM NO. PART
NUMBER DESCRIPTION Vendor QTY.
1 316 Main Linkage Midwest Steel and Aluminum 1
2 307 Rod Channel Midwest Steel and Aluminum 1
3 302 Bearing McMaster - Carr 3
4 203 Press Assembly Midwest Steel and Aluminum 1
5 330 Top Linkage Midwest Steel and Aluminum 2
6 303 Bottom Linkage Midwest Steel and Aluminum 2
7 317 Middle Linkage Midwest Steel and Aluminum 2
8 315 Link Boss Midwest Steel and Aluminum 2
9 341 Hex Nut McMaster -Carr 5
10 339 Hex Bolt 1 McMaster -Carr 1
11 208 Lever Assembly Midwest Steel Aluminum 1
12 338 Hex Bolt 2 McMaster -Carr 2
13 340 Hex Bolt 3 McMaster -Carr 2A A
B B
4
4
3
3
2
2
1
1
Desktop Sand Casting Unit
Linkage Assembly
DO NOT SCALE DRAWING
207
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:8 WEIGHT:
REVDWG. NO.
B
SIZE
TITLE:
NAME
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN BY:
Smooth
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
Sand-A-Saurus Rex
(Group 5) ME333
Aluminum
Patrick Lindmeier
8. 3
1
2
1/8
1/8
ITEM
NO.
PART
NUMBER DESCRIPTION Vendor QTY.
1 312 Lever Base Midwest Steel
and Aluminum
1
2 313 Lever
Extension
Midwest Steel
and Aluminum
1
3 314 Lever McMaster -Carr 1A A
B B
4
4
3
3
2
2
1
1
Desktop Sand Casting Unit
Lever Assembly
DO NOT SCALE DRAWING
208
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:4 WEIGHT:
REVDWG. NO.
B
SIZE
TITLE:
NAME
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN BY:
Smooth
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
Sand-A-Saurus Rex
(Group 5) ME333
Aluminum
Patrick Lindmeier
9. 3
5
4
1
2
6
1/8
ITEM NO. PART NUMBER DESCRIPTION Vendor QTY.
1 329 Thermistor Amazon 1
2 342 Nozzle Amazon 1
3 308 Extruder Piece 1 Amazon 1
4 309 Extruder Piece 2 Amazon 1
5 310 Extruder Piece 3 Amazon 1
6 337 Nema 17 Stepper Motor Amazon 1A A
B B
4
4
3
3
2
2
1
1
Desktop Sand Casting Unit
Motor and Extuder Assembly
DO NOT SCALE DRAWING
209
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1 WEIGHT:
REVDWG. NO.
B
SIZE
TITLE:
NAME
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN BY:
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
Sand-A-Saurus Rex
(Group 5) ME333Patrick Lindmeier
10. 8.25
0.30
0.25
2 1
A
B
A
B
12
Aluminum
Desktop Sand Casting Unit
Back Guide Rail
DO NOT SCALE DRAWING
301
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
11. 4.00
1.00
R0.50
0.50
TYP 0.25
2 1
A
B
A
B
12
Aluminum
Desktop Sand Casting Unit
Bottom Linkage
DO NOT SCALE DRAWING
303
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
12. 11.75
12.00
0.13
2 1
A
B
A
B
12
Aluminum
Desktop Sand Casting Unit
Back Panel
DO NOT SCALE DRAWING
304
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
13. 0.375
0.25
8.00
8.00
3.625 TYP
3.625TYP
0.281 TYP
0.50
0.80
0.30
0.55
CL
CL
2 1
A
B
A
B
12
Aluminum
Desktop Sand Casting Unit
Compaction Plate
DO NOT SCALE DRAWING
305
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
14. 3.00
1.14
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Rod Channel
DO NOT SCALE DRAWING
307
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
15. 8.90
0.30
0.25
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Side Guide Rail
DO NOT SCALE DRAWING
311
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
16. 2.00
1.00
1.00
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Lever Base
DO NOT SCALE DRAWING
312
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
17. 1.000.50-20 UNC 2B
45°
5.00
4.00
0.02
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Lever Extension
DO NOT SCALE DRAWING
313
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
18. 1.25
0.53
0.375
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Link Boss
DO NOT SCALE DRAWING
315
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
19. 1.50
121.24°
99.80°
R2.48
R2.49
6.00
4.35
31.24°
R2.01
0.53
7.31
1.92
R1.50
12.92
1.00
2.74 0.95
2.060.971.12
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Main Linkage Part
DO NOT SCALE DRAWING
316
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
20. R0.50
0.53
10.00 0.25
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Middle Link
DO NOT SCALE DRAWING
317
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
21. 0.25
8.25
5.00
0.75
CL
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Placement Rods
DO NOT SCALE DRAWING
318
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
22. 1.00
10.9
1.00-8 UNC 2A
1.1
12.00
A
DETAIL A
SCALE 1 : 1
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Press Rod
DO NOT SCALE DRAWING
319
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
23. 1.00
0.50
4.100.15 0.25
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Reel Holder
DO NOT SCALE DRAWING
321
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
24. 0.53
R0.65
0.10
1.75
1.75
1.00 Centered
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Rod Eye
DO NOT SCALE DRAWING
322
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
25. 1.11
1.05
2.00
1.00-8 UNC 2B
1.50
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Rod Holder
DO NOT SCALE DRAWING
323
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
26. 8.25
8.25
0.13
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Sand Box Bottom
DO NOT SCALE DRAWING
324
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
27. 8.00
3.50
0.13
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Sand Box Side 2
DO NOT SCALE DRAWING
325
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
28. 8.25
3.50
0.13
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Sand Box Side 1
DO NOT SCALE DRAWING
326
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
29. 0.75
0.28
1.75
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Sand Box Holder
DO NOT SCALE DRAWING
327
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
30. 2.20
1.13
3.000.25
1.86
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Spring
DO NOT SCALE DRAWING
328
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
31. 14.00
R0.50
x
2
0.53 x 2
0.25
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Top Link
DO NOT SCALE DRAWING
330
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
32. 12.0012.000.13
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Outer Shell Sides
DO NOT SCALE DRAWING
331
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
33. 4.86 TYP
15.11 TYP
5.34 TYP
3.91 TYP
2.86
4.82
7.63
6.82
5.27
3.63
R13.03
19.44
5.56
33.05
.25
33.12
A A
B B
4
4
3
3
2
2
1
1
Desktop Sand Casting Unit
T-Rex Panel (Right)
DO NOT SCALE DRAWING
343
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:12 WEIGHT:
REVDWG. NO.
B
SIZE
TITLE:
NAME
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN BY:
Smooth
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
Sand-A-Saurus Rex
(Group 5) ME333
Aluminum
Patrick Lindmeier
34. 2.75
4.86
15.11
2.20
11.45
4.40
5.96
R13.03
19.44
5.56
33.12
.25
A A
B B
4
4
3
3
2
2
1
1
Desktop Sand Casting Unit
T-Rex Panel (Left)
DO NOT SCALE DRAWING
344
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:12 WEIGHT:
REVDWG. NO.
B
SIZE
TITLE:
NAME
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN BY:
Smooth
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
Sand-A-Saurus Rex
(Group 5) ME333
Aluminum
Patrick Lindmeier
35. .58
R13.03
19.44
98°
17.77
12.40
31.09
A A
B B
4
4
3
3
2
2
1
1
Desktop Sand Casting Unit
T-Rex Back Panel
DO NOT SCALE DRAWING
345
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:12 WEIGHT:
REVDWG. NO.
B
SIZE
TITLE:
NAME
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN BY:
Smooth
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
Sand-A-Saurus Rex
(Group 5) ME333
Plastic
Patrick Lindmeier
36. 0.40
0.29
0.20 THRU 3.00
0.40
0.10
3.25
0.15
2 1
A
B
A
B
12
ALUMINUM
Desktop Sand Casting Unit
Injection Flute
DO NOT SCALE DRAWING
349
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only
37. 3.50
2.50
2 1
A
B
A
B
12
Aluminum
Desktop Sand Casting Unit
Riser
DO NOT SCALE DRAWING
350
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2 WEIGHT:
REVDWG. NO.
A
SIZE
TITLE:
Sand-A-Saurus Rex
(Group 5) ME333
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SMOOTH
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 0.01
ONE PLACE DECIMAL 0.0063
TWO PLACE DECIMAL 0.003
THREE PLACE DECIMAL 0.001
APPLICATION
USED ONNEXT ASSY
SOLIDWORKS Educational Product. For Instructional Use Only