We have various type of DP Transmitters.
DP Transmitters are very commonly used in Industrial applications like DP measurement across Filters, DP Measurement across Strainers, for Level measurement in Pressurized Tanks and also for Flow Measurement through Orifice Plates.
Datasheet Fluke 7526A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Precision Process Calibrator. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Features:
• Cost effective and versatile
• High accuracy, better than 1.0% read
• Portable main unit, Compact enclosure, Portable case for all accessories.
• Wide flow measurement range, from 0.03 to 105 ft/s (0.01m/s-32m/s).
• Velocity, volumetric and totalized flow display
• Bi-directional, Totalized for net, positive and negative flow display.
• Wide pipe size range, from 3/4" to 240" (DN 20-6.00 mm).
• Suitable for all commonly used pipe materials.
• Rechargeable battery for 16 hours of operation.
• Self-explanatory user interface, easy to operate.
• Signal quality tracking and self-adjusting capabilities automatically match transducer to pipe material
• Ideal for both clean and opaque liquid flow, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration.
• Clear, user-friendly menu selections make DMTFP simple and convenient to use.
We have Hirlekar make DP Gauges. DP Gauges are also known as PD Gauges, DP Guages, PD Guages, Differential Pressure Gauges, Pressure Differential Gauges.
Datasheet Fluke 7526A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Precision Process Calibrator. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Features:
• Cost effective and versatile
• High accuracy, better than 1.0% read
• Portable main unit, Compact enclosure, Portable case for all accessories.
• Wide flow measurement range, from 0.03 to 105 ft/s (0.01m/s-32m/s).
• Velocity, volumetric and totalized flow display
• Bi-directional, Totalized for net, positive and negative flow display.
• Wide pipe size range, from 3/4" to 240" (DN 20-6.00 mm).
• Suitable for all commonly used pipe materials.
• Rechargeable battery for 16 hours of operation.
• Self-explanatory user interface, easy to operate.
• Signal quality tracking and self-adjusting capabilities automatically match transducer to pipe material
• Ideal for both clean and opaque liquid flow, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration.
• Clear, user-friendly menu selections make DMTFP simple and convenient to use.
We have Hirlekar make DP Gauges. DP Gauges are also known as PD Gauges, DP Guages, PD Guages, Differential Pressure Gauges, Pressure Differential Gauges.
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
We have Electro Magnetic Flow Meters, which has Digital Readout for Flow Rate as well as Total Flow. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Meters is, the fluid passing through it must be conductive, The conductivity of the liquid must be at least 0.5 µS/Cm.
Features:
• Cost effective and versatile
• High accuracy, better than 1.0% read
• Portable main unit, Compact enclosure, Portable case for all accessories.
• Wide flow measurement range, from 0.03 to 105 ft/s (0.01m/s-32m/s).
• Velocity, volumetric and totalized flow display
• Bi-directional, Totalized for net, positive and negative flow display.
• Wide pipe size range, from 3/4" to 240" (DN 20-6.00 mm).
• Suitable for all commonly used pipe materials.
• Rechargeable battery for 16 hours of operation.
• Self-explanatory user interface, easy to operate.
• Signal quality tracking and self-adjusting capabilities automatically match transducer to pipe material
• Ideal for both clean and opaque liquid flow, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration.
• Clear, user-friendly menu selections make DMTFP simple and convenient to use.
We have Hirlekar make Diaphragm type Differential Pressure Gauges. Differential Pressure Gauges are also known as Diaphgragm type DP Gauges and Diaphragm type PD Switches. These type of DP Gauges are used for DP measurement across Filters / Pumps / Strainers / Heat Exchangers etc. Diaphragm type Differential Pressure Gauges are also available with Switching contacts and are very commonly used for HVAC applications and Filtration plants.
Digital flow rate Indicator with Totalizer with Relay/Batcher/Pulser (Models : P-282 & F-282)
Type of sensor : Insertion Paddle Wheel type Flow Rate Indicator with Totalizer
Max. % of Solids : 1 % of fluid volume, non-abrasive, non-magnetic,<100 micron in dia.& length
Mounting : Field or, Panel
Pipe Line size : min. 15 mm up to 500 mm
Pressure drop : Less than 0.1 bar
Pulses : 4 Pulses each rotation
Accuracy : +/- 1% of Full Scale if velocity is more than 0.5 m/s
Repeatability : +/- 0.5%
Enclosure : Weather proof IP 65
Gland : PO7
Fitting material : ABS, SS304 or, SS316
Fitting Type : Threaded, Flanged, Weld on Adaptor
Flow Ranges : min. from 4.33 to 58000 LPM
Max. Operating Temperature: 60° C for PP Sensor with ABS fittings & 100°C for SS Sensor with SS Fitting
Sensor Cable Length : 0.5 mtrs for Field Mounted Meter & 3 mtrs for Panel Mounted Meter
Paddle : PVDF (Magnetic up to 100°C & Non Magnetic up to 80°C)
Indicator Housing : Polycarbonate
O-rings/Pin : Viton/Hastealloy C
Sensor Rod : PP or, SS316
Max. Working Pressure: 7 kg/cm2 for PP Sensor with ABS fittings and
12 Kg/cm2 for SS Sensor with SS fitting.
Display : 16 X 2 alpha-numeric LCD display with Backlit
Indicator unit dimensions: 110 mm (H) X 110 mm (W) X 150 mm (D)
Field selectable Units : M3/Hr., LPH, LPM, LPS, GPMUS, and GPMUK
Supply : 230 V AC +/- 15%, 50 H
T Fitting : It is compulsory with PP or, SS 316 Flow Sensors
(Selection from TYPE OF T-FITTINGS)
We have Electro Magnetic Flow Meters, which has Digital Readout for Flow Rate as well as Total Flow. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Meters is, the fluid passing through it must be conductive, The conductivity of the liquid must be at least 0.5 µS/Cm.
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
We have Hirlekar make Diaphragm type Differential Pressure Gauges. Differential Pressure Gauges are also known as Diaphgragm type DP Gauges and Diaphragm type PD Switches. These type of DP Gauges are used for DP measurement across Filters / Pumps / Strainers / Heat Exchangers etc. Diaphragm type Differential Pressure Gauges are also available with Switching contacts and are very commonly used for HVAC applications and Filtration plants.
We have Hirlekar make DP Gauges. DP Gauges are also known as PD Gauges, DP Guages, PD Guages, Differential Pressure Gauges, Pressure Differential Gauges.
2600T Series Pressure Transmitter Model 261GS Gauge Model 261AS Absolute stan...Michael Sun
■ Base accuracy: ±0.15 %
■ Span limits
– 0.3 to 60000 kPa; 1.2 inH2O to 8700 psi
– 0.3 to 3000 kPa abs; 2.25 mmHg to 435 psia
■ Reliable sensing system coupled with very latest
digital technologies
– provides large turn down ratio up to 20:1
■ Stainless steel housing
– optimized for rough environment
– extreme robust
2600T Series Pressure Transmitter Model 261GS Gauge Model 261AS Absolute stan...Michael Sun
■ Base accuracy: ±0.15 %
■ Span limits
– 0.3 to 60000 kPa; 1.2 inH2O to 8700 psi
– 0.3 to 3000 kPa abs; 2.25 mmHg to 435 psia
■ Reliable sensing system coupled with very latest
digital technologies
– provides large turn down ratio up to 20:1
■ Stainless steel housing
– optimized for rough environment
– extreme robust
Ria46 endress+hauser datasheet-field meter - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
We have Electro Magnetic Flow Meters, which has Digital Readout for Flow Rate as well as Total Flow. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Meters is, the fluid passing through it must be conductive, The conductivity of the liquid must be at least 0.5 µS/Cm.
Features:
• Cost effective and versatile
• High accuracy, better than 1.0% read
• Portable main unit, Compact enclosure, Portable case for all accessories.
• Wide flow measurement range, from 0.03 to 105 ft/s (0.01m/s-32m/s).
• Velocity, volumetric and totalized flow display
• Bi-directional, Totalized for net, positive and negative flow display.
• Wide pipe size range, from 3/4" to 240" (DN 20-6.00 mm).
• Suitable for all commonly used pipe materials.
• Rechargeable battery for 16 hours of operation.
• Self-explanatory user interface, easy to operate.
• Signal quality tracking and self-adjusting capabilities automatically match transducer to pipe material
• Ideal for both clean and opaque liquid flow, in fact, most any liquid containing less than 5% total suspended solids (TSS) or aeration.
• Clear, user-friendly menu selections make DMTFP simple and convenient to use.
We have Hirlekar make Diaphragm type Differential Pressure Gauges. Differential Pressure Gauges are also known as Diaphgragm type DP Gauges and Diaphragm type PD Switches. These type of DP Gauges are used for DP measurement across Filters / Pumps / Strainers / Heat Exchangers etc. Diaphragm type Differential Pressure Gauges are also available with Switching contacts and are very commonly used for HVAC applications and Filtration plants.
Digital flow rate Indicator with Totalizer with Relay/Batcher/Pulser (Models : P-282 & F-282)
Type of sensor : Insertion Paddle Wheel type Flow Rate Indicator with Totalizer
Max. % of Solids : 1 % of fluid volume, non-abrasive, non-magnetic,<100 micron in dia.& length
Mounting : Field or, Panel
Pipe Line size : min. 15 mm up to 500 mm
Pressure drop : Less than 0.1 bar
Pulses : 4 Pulses each rotation
Accuracy : +/- 1% of Full Scale if velocity is more than 0.5 m/s
Repeatability : +/- 0.5%
Enclosure : Weather proof IP 65
Gland : PO7
Fitting material : ABS, SS304 or, SS316
Fitting Type : Threaded, Flanged, Weld on Adaptor
Flow Ranges : min. from 4.33 to 58000 LPM
Max. Operating Temperature: 60° C for PP Sensor with ABS fittings & 100°C for SS Sensor with SS Fitting
Sensor Cable Length : 0.5 mtrs for Field Mounted Meter & 3 mtrs for Panel Mounted Meter
Paddle : PVDF (Magnetic up to 100°C & Non Magnetic up to 80°C)
Indicator Housing : Polycarbonate
O-rings/Pin : Viton/Hastealloy C
Sensor Rod : PP or, SS316
Max. Working Pressure: 7 kg/cm2 for PP Sensor with ABS fittings and
12 Kg/cm2 for SS Sensor with SS fitting.
Display : 16 X 2 alpha-numeric LCD display with Backlit
Indicator unit dimensions: 110 mm (H) X 110 mm (W) X 150 mm (D)
Field selectable Units : M3/Hr., LPH, LPM, LPS, GPMUS, and GPMUK
Supply : 230 V AC +/- 15%, 50 H
T Fitting : It is compulsory with PP or, SS 316 Flow Sensors
(Selection from TYPE OF T-FITTINGS)
We have Electro Magnetic Flow Meters, which has Digital Readout for Flow Rate as well as Total Flow. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Meters is, the fluid passing through it must be conductive, The conductivity of the liquid must be at least 0.5 µS/Cm.
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
We have Hirlekar make Diaphragm type Differential Pressure Gauges. Differential Pressure Gauges are also known as Diaphgragm type DP Gauges and Diaphragm type PD Switches. These type of DP Gauges are used for DP measurement across Filters / Pumps / Strainers / Heat Exchangers etc. Diaphragm type Differential Pressure Gauges are also available with Switching contacts and are very commonly used for HVAC applications and Filtration plants.
We have Hirlekar make DP Gauges. DP Gauges are also known as PD Gauges, DP Guages, PD Guages, Differential Pressure Gauges, Pressure Differential Gauges.
2600T Series Pressure Transmitter Model 261GS Gauge Model 261AS Absolute stan...Michael Sun
■ Base accuracy: ±0.15 %
■ Span limits
– 0.3 to 60000 kPa; 1.2 inH2O to 8700 psi
– 0.3 to 3000 kPa abs; 2.25 mmHg to 435 psia
■ Reliable sensing system coupled with very latest
digital technologies
– provides large turn down ratio up to 20:1
■ Stainless steel housing
– optimized for rough environment
– extreme robust
2600T Series Pressure Transmitter Model 261GS Gauge Model 261AS Absolute stan...Michael Sun
■ Base accuracy: ±0.15 %
■ Span limits
– 0.3 to 60000 kPa; 1.2 inH2O to 8700 psi
– 0.3 to 3000 kPa abs; 2.25 mmHg to 435 psia
■ Reliable sensing system coupled with very latest
digital technologies
– provides large turn down ratio up to 20:1
■ Stainless steel housing
– optimized for rough environment
– extreme robust
Ria46 endress+hauser datasheet-field meter - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
High performance differential pressure transmitters feature a single crystal silicon resonant sensor and are suitable to measure liquid, gas, or steam flow as well as liquid level, density and
pressure. Standard output is a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.
The high performance differential pressure transmitter EJX110A features single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. EJX110A outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.
H2scan’s 2620 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit. The monitor is designed for either ceiling or wall mount. H2scan’s hydrogen-specific sensor technology has no cross sensitivity to other combustible gases, thus eliminating false positive alarms and ensuring safety system reliability.
Looking Temperature Controller? ESD India manufactures high quality temperature Controller, instruments. Contact us and quote for temperature Controllernow!
AC Voltage and AC Current Transducers find extensive use in monitoring Powerline parameters. Canopus Instruments offers the highly capable AC Voltage and Current Transducers. Order your machine now!
Visit:
http://www.canopusinstruments.com/product/industrial-automation-product/signal-conditioning-isolation/powerline-transducers-ac-voltage-current-converter-90-270vac-supply/
Thermocouple Signal Converter - Canopus Instrumentssmita_kale
Buy top quality thermocouple converter in India. Canopus Instruments offers the best thermocouple transmitter in industry. Get in touch with us to know more about our products. https://www.canopusinstruments.com/product/industrial-automation-product/signal-conditioning-isolation/thermocouple-signal-converter/
Vibrating fork Level Switches Aqua fork Swift Supplier and Manufacturer in In...NK Instruments Pvt. Ltd.
Vibrating Fork type Level Switches are single point level switches. Vibrating Fork type Level Switches are also known as Tuning Fork Level Switches. The electronics control unit is integral with the sensing probe. Fail safe logic is field selectable.
There ate two type of Vibraing Fork Level Switches - Vibraing Fork for Solids
Vibrating Fork for Low Density material & Liquids
Housing : Cast Aluminium Weatherproof
Mains : : 230 V AC, 110 V AC or, 24 V DC
Output : : 2 set of C/O contacts rated at 5 amps, 230 V AC for resistive loads.
or. PNP NO
Switching Delay: : 2 sec to 20 Sec ( adj.) for probe covered and uncovered (OPTIONAL)
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.
We have Diaphragm type Differential Pressure Switches. These gauges are more in demand for DP control applications in HVAC / across Heat Exchangers / across Pumps / across Filters / across Strainers, Level Control applications in pressurized tanks,
Ranges : from 0 to 150 mm WC up to 0 to 7 bar
Differential : Fixed
Accuracy : +/- 1% FS
Temperature Range : -10 to 80 Degree C (for high-temperature use of impulse tube is advisable)
Migration : Impossible
No. of Switches : One or, Two.
Type of Switches : Micro Switches - SPDT, 5 A 250 V AC
Enclosure class : IP 54, IP 65, IP 66 or, Flameproof
Pressure Housing : MS or, SS
Sensing Diaphragm : Neoprene or, Teflon
Process Connection : ¼” BSP-F (Standard)
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.
NK Instruments Pvt. Ltd. has 2 SPDT type Pressure Switches also. Those are used when 2 contacts are to be used at a time when switch operates. We have DJ & MJ series switches with Adjustable Stage Differential Switches and MK & DK series switches are available with 2 SPDT Fixed Stage Differential Switches. These switches are available in Weatherproof model IP 54 & IP 65. We also have 2 SPDT Flameproof Pressure Switches.
"NK Instruments Pvt. Ltd. has 2 SPDT type Pressure Switches also. Those are used when 2 contacts are to be used at a time when switch operates. We have DJ & MJ series switches with Adjustable Stage Differential Switches and MK & DK series switches are available with 2 SPDT Fixed Stage Differential Switches. These switches are available in Weatherproof model IP 54 & IP 65. We also have 2 SPDT Flameproof Pressure Switches.
Various Pressure Ranges : from 0 to 1 Bar up to 0 to 400 Bar
Stage Difference (Dead Band between two switches) : Fixed Stage Differential or, Adjustable Stage Differential
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : Two nos.
Type of Switches : Micro Switches - 2 SPDT (5A 250 V AC or, 0.2 A 250 V DC.)
Sensing Element : Diaphragm (PTFE, Neoprene or, SS 316:L) OR, Piston
Enclosure : Weatherproof (IP 54), Weatherproof (IP 65), Weatherproof (IP 66), Flameproof
Pressure Housing : Aluminium, Brass, SS 316 or, special on request
Process Connection : ¼” BSP (F) or, special on request
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.
General information:
KU series pressure switches are housed in pressed steel
powder coated enclosure and are recommended for
panel mounting or indoor service. The repeat accuracy is
better than +/-1.5 % FSR, Pressure port is 1/4” BSPM
standard.
Features:
Compact
SS316 & Teflon as standard wetted parts
Electrical Rating : 15A, 125/250 VAC
Pressure port : 1/4” BSPM
Range Selection Table
Model + Range Bar (psi)
0.5 - 7.0
(7.25 - 101.50)
1.0 - 15.0
(14.5 - 217.5)
5.0 - 25.0
(72.5 - 362.5)
*Adjustable Differential bar (psi)
1.2 –
Flameproof Pressure Switches are designed as per IS2148 for Gas Gr. IIC Flameproof - CE Certification and approved by a leading European Lab – “BASEEFA” for ATEX & ICEEX certificates
Various Ranges : from 0 to 150 mm Wc upto 0 to 400 Bar
Differential (Dead Band) : Fixed (Within 10% of set value) Or, Adjustable
Sensing Element : Diaphragm (PTFE, Neoprene or, SS 316) or Piston
Enclosure : Flameproof to group IIC
We have Smart type DP Transmitters with magnetic key. These Smart Differential Pressure Transmitters are available in wide range from Absolute till 1000 bar in IP 67 enclosure. SMART DP Transmitters has LCD display for local indication for measured DP value.
Vibration Switches are used to keep a watch on Vibrations in the industrial application. For excessive Vibrations this switch operates. Vibration is a Safety Switch. We have FFE make Vibration Switches, which works on Acceleration. We have Flameproof Vibration Switches and Weatherproof Vibration Switches. We have Manual reset Vibration Switches and Remote Reset Vibration Switches also.
www.vibrationinstruments.net
Series 3171-MR are Vibration Switches with options as Manual Reset type and Remote Reset type .
Enclosure : Sealed Ingress Protection to IP 67 to BS EN60947-1 or,
Ingress Protection IP 67 to BS 5420
Set level range : 1 to 9g Peak (Horizontal Vibrations)
Contacts : Silver or, Gold
Mounting : Fix to vertical face with Reset Button at bottom.
NOTE : ac solenoids normally continuously rated
dc solenoids intermittent 25% rated i.e. (1 min. ON & 3 mins OFF)
Electrical Reset : Solenoid rating 48 watts maximum intermittent rating
Solenoid voltages 110, 240 ac or 24 dc
Series 3171-MR are Vibration Switches with options as Manual Reset type and Remote Reset type .
Enclosure : Sealed Ingress Protection to IP 67 to BS EN60947-1 or,
Ingress Protection IP 67 to BS 5420
Set level range : 1 to 9g Peak (Horizontal Vibrations)
Contacts : Silver or, Gold
Mounting : Fix to vertical face with Reset Button at bottom.
NOTE : ac solenoids normally continuously rated
dc solenoids intermittent 25% rated i.e. (1 min. ON & 3 mins OFF)
Electrical Reset : Solenoid rating 48 watts maximum intermittent rating
Solenoid voltages 110, 240 ac or 24 dc
Vacuum Transmitter senses the Vacuum in the process and gives the output in current or, voltage in proportion to the change in Vacuum.
Indication : without
Output options : 4 to 20 mA, 0 to 10 Vdc, 1 to 5 Vdc or, 0.5 to 4.5 V dc under 5 V dc
Accuracy : +/- 0.25%, 0.5% or, 1% of FS
Enclosure type : IP 65, IP 67, IP 68, Exproof
Zero and Span Adjustment : With or, Without
Process connection options : 1/4" BSP threaded end
Ranges : various ranges from 0 to 760 mm Hg
Max. pressure : Full Vacuum up to 2 bar pressure
Operating Temperature: 0 to 60 degree C
Flameproof Vacuum Switch is designed as per IS2148 for Gas Gr. IIC Flameproof - CE Certification and approved by a leading European Lab – “BASEEFA” for ATEX & ICEEX certificates
Adjustable Range : 760 to 100 mm Hg Vacuum
Diaphragm : Teflon or, Neoprene
Pressure Housing MOC : Aluminium, Brass or, SS 316
Varieties of Vacuum Switches are available on the basis of the Enclosure like IP 54, IP 54, IP 65 or, IP 66
Adjustable Range : 760 to 100 mm Hg Vacuum
Diaphragm : Teflon or, Neoprene
Pressure Housing MOC : Aluminium, Brass or, SS 316
Varieties of Vacuum Switches are available on the basis of the Enclosure like IP 54, IP 54, IP 65 or, IP 66
Adjustable Range : 760 to 100 mm Hg Vacuum
Diaphragm : Teflon or, Neoprene
Pressure Housing MOC : Aluminium, Brass or, SS 316
As a business owner in Delaware, staying on top of your tax obligations is paramount, especially with the annual deadline for Delaware Franchise Tax looming on March 1. One such obligation is the annual Delaware Franchise Tax, which serves as a crucial requirement for maintaining your company’s legal standing within the state. While the prospect of handling tax matters may seem daunting, rest assured that the process can be straightforward with the right guidance. In this comprehensive guide, we’ll walk you through the steps of filing your Delaware Franchise Tax and provide insights to help you navigate the process effectively.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Business Valuation Principles for EntrepreneursBen Wann
This insightful presentation is designed to equip entrepreneurs with the essential knowledge and tools needed to accurately value their businesses. Understanding business valuation is crucial for making informed decisions, whether you're seeking investment, planning to sell, or simply want to gauge your company's worth.
India Orthopedic Devices Market: Unlocking Growth Secrets, Trends and Develop...Kumar Satyam
According to TechSci Research report, “India Orthopedic Devices Market -Industry Size, Share, Trends, Competition Forecast & Opportunities, 2030”, the India Orthopedic Devices Market stood at USD 1,280.54 Million in 2024 and is anticipated to grow with a CAGR of 7.84% in the forecast period, 2026-2030F. The India Orthopedic Devices Market is being driven by several factors. The most prominent ones include an increase in the elderly population, who are more prone to orthopedic conditions such as osteoporosis and arthritis. Moreover, the rise in sports injuries and road accidents are also contributing to the demand for orthopedic devices. Advances in technology and the introduction of innovative implants and prosthetics have further propelled the market growth. Additionally, government initiatives aimed at improving healthcare infrastructure and the increasing prevalence of lifestyle diseases have led to an upward trend in orthopedic surgeries, thereby fueling the market demand for these devices.
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
Affordable Stationery Printing Services in Jaipur | Navpack n PrintNavpack & Print
Looking for professional printing services in Jaipur? Navpack n Print offers high-quality and affordable stationery printing for all your business needs. Stand out with custom stationery designs and fast turnaround times. Contact us today for a quote!
Accpac to QuickBooks Conversion Navigating the Transition with Online Account...PaulBryant58
This article provides a comprehensive guide on how to
effectively manage the convert Accpac to QuickBooks , with a particular focus on utilizing online accounting services to streamline the process.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Remote sensing and monitoring are changing the mining industry for the better. These are providing innovative solutions to long-standing challenges. Those related to exploration, extraction, and overall environmental management by mining technology companies Odisha. These technologies make use of satellite imaging, aerial photography and sensors to collect data that might be inaccessible or from hazardous locations. With the use of this technology, mining operations are becoming increasingly efficient. Let us gain more insight into the key aspects associated with remote sensing and monitoring when it comes to mining.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
chapter 10 - excise tax of transfer and business taxation
Low Rang DP Transmitter
1. NK Instruments Pvt. Ltd. has Low range Differential Pressure Transmitters, which
can accurately measure positive, negative, or differential pressure and send the
corresponding 4-20 mA output signal. The Series 211 Differential Pressure
Transmitter is not position sensitive and can be mounted in any orientation without
compromising accuracy. It also features a power LED, so you always know when
the transmitter is operating. The compact, lightweight design makes installation
simple and easy.
· Compact Design
· 0.25% Accuracy
· LED Power Indication
· 4-20 mA or 0-10 V Output
Maximum Pressure : Ranges ≤ 5 PSI (35 kPa) = 15 PSI (100 kPa) Max Ranges > 5 PSI (35 kPa) = 30
PSI (200 kPa) Max
Media
compatibility
: Air and compatible non-combustible, non-corrosive gasses
Accuracy : Ranges ≤ 4” w.c. (1 kPa) 1.0% Ranges ≥ 5” w.c. (1.25 kPa) 0.25%
Temperature
Ranges
: Compensated: 15° to 120°F (-10° to 50°C) Operating: -10° to 155°F
(-25° to 70°C)
Thermal Effect : +/- 0.028% FS/°F (+/- 0.050%/° C) Stability: +/- 0.25% FS/year
Output Signal : 4-20 mA, 2 wire or 0-10V
Loop Resistance: : 250 Ω @ 24 VDC
Power Supply : 12-30 VDC
Housing Material : ABS Plastic
Electrical
Connections
: screw terminals
Process Connection : Push on connection for 3/16” I.D. tubing
Agency Approvals : CE
Continuous efforts for product development may necessitate changes in these details without notice
FEATURES DIMENTIONS
SPECIFICATIONS
NK Instruments Pvt. Ltd.B-501/504, 5th floor, Raunak Arcade, Near THC Hospital, Gokhale Road, Naupada,
Thane(W) 400602. Maharashtra INDIA Telefax Nos.: 91-22-25301330 / 31 / 32
E-Mail: sales@nkinstruments.com Web: http://www.nkinstruments.com
Skype: nitinkelkarskype Gtalk: nkinstruments2006
Authorised Dealer