This part of the planning shows the location that I did the photo shoot in. I explained why I used this location.

1. Location:<br />ACTIVITYIS THE LOCATION SUITABLE?ADDITIONAL COMMENTSLook around the location.YesIt is set in and outside my house.Talk to people there, organise filming permissions.YesI asked my parents’ permission to take photos in and outside their house.Identify the equipment you need to use.YesCamera, guitar, Examine and identify any potential health and safety issues(Both people and equipment related issues e.g. crowd numbers being controlled; using safe cabling practices and video equipment being set up in a sensible location that does not block access points or that damages the environment or frightens livestock)YesWhen taking photos outside we have a small pond, I would have to ensure no equipment falls or my model.As part of my garden was decking which was raised I have to ensure my models were aware so they don’t trip over it.When taking images inside I would had to ensure that no objects get damaged such as plants, lights ect... Check the position of the sun and lighting conditions.Ye sI had to make sure that the lighting was correct and no shadows appeared. Also make sure the flash on the camera doesn’t affect the photo.Look for interesting shots and camera angles.Yes I used a range of camera angles to make it look interesting. (MLS LS high and low angle). Confirm times and dates with modelsYesI emailed them to sort out a date for shooting convenient for both of us.Arrange car parking, access, loading, security, where possible.YesThere is plenty of parking space on my drive. The models were able to drive over. Make sure everybody concerned with your photo shoot knows what is happening and what is expected of them when on location.Yes I spoke to them as well as emailing so I could fully brief them on what is expected.<br />Images of location: <br />3030220271145One half of garden, here you can see a small pond/water feature at the end. I had to ensure that no equipment fell in it or else it would get damaged. I would also have to ensure my models are aware of it and tell them to take caution. As you can see this part of the garden is decking. I had to make sure my models knew it was raised so they wouldn’t fall off the edge. This location was good because it has natural lighting. The decking and brick wall gives it a rustic look.00One half of garden, here you can see a small pond/water feature at the end. I had to ensure that no equipment fell in it or else it would get damaged. I would also have to ensure my models are aware of it and tell them to take caution. As you can see this part of the garden is decking. I had to make sure my models knew it was raised so they wouldn’t fall off the edge. This location was good because it has natural lighting. The decking and brick wall gives it a rustic look.<br />128270143510Second half of garden, here is the grass section with a little decking section. It has ‘sleeper’s around the edge so I had to make sure my models knew about them so they didn’t trip over them. I chose this location because the lighting was good as it was natural. I think the brick wall, wooden sleepers and bark gives it a rustic and natural setting.00Second half of garden, here is the grass section with a little decking section. It has ‘sleeper’s around the edge so I had to make sure my models knew about them so they didn’t trip over them. I chose this location because the lighting was good as it was natural. I think the brick wall, wooden sleepers and bark gives it a rustic and natural setting.0185420<br />-29972001781175<br />51435151765This location is in my house. I used this because i could use the plain background if the painted wall (dark beige and cream/white). It made my model stand out more. The lighting here was not that good because the inside lights give off an orange light which didn’t look good. Also you get the natural light through the glass which created unwanted shadows.00This location is in my house. I used this because i could use the plain background if the painted wall (dark beige and cream/white). It made my model stand out more. The lighting here was not that good because the inside lights give off an orange light which didn’t look good. Also you get the natural light through the glass which created unwanted shadows.<br />