This document provides specifications for several models of aluminum and steel end shaft supports and rail supports. It includes the nominal shaft diameter, dimensions, weights, materials, and hole patterns for the ES-A, ES-S, ARS-PD, and LSRS-PD series of supports. Support lengths range from 10 to 48 inches.
Jaquess 36X48 Jaw
Our Customer would like to fill both ends to 18" F.I.E.
Just like in the photo, this design will be more durable。
If the crusher operates in very abrasive conditions at a very tight css then bottom of the jaws wear very quickly, fill jaw at both ends will help. But when you crush rock it expands by volume, corrugations allow this to occur, with this type of jaw enormous stress is transferred into the lower jaw frame and pitman/ bearings.
If rock is abrasive and soft no big deal, if its abrasive and tough, it can cause big issues.
We saw this problem with 50X60 Jaw at Huzhou quarry outside Shanghai.
So if possible good to know actual application and type of rock to decide best option.
Nip angle in crushing chamber is very important, smaller the better which is why thicker jaws with curve are requested by many people.
10 one of bogvik’s strongest product categories is plates made of manganese s...Fernando Zhang
One of Bogvik’s strongest product categories is plates made of manganese steel for jaw crushers.
This year, BOGVIK launched a new product — BOGVIK TIC plates. These are linings made of the standard alloys C, D and D1 but are reinforced with titanium carbide inserts. They show higher resistance to shock loads and cracking. This effect is achieved by special casting processes and heat treatment of the finished product, and the base alloy is selected in accordance with a rock type.
During the tests, the linings with inserts boasted an operating time that was 1.5 to 4 times more than that of classic manganese steel wear parts without inserts.
If you seek solutions to increase the intervals between plate replacement, reduce the number of maintenance stops, and lower your unit production costs — BOGVIK is what you need.
Contact our crushing&screening department to request individual solutions at: sales@bogvik.com
01 bogvik customizes the sandvik ch550 for customers with different chamber l...Fernando Zhang
BOGVIK customizes the CH550 for customers with different Chamber liners
CH550 CONCAVE F 452.8600-001
CH550 MANTLE B 452.8602-001
CH550 CONCAVE EC TOP GRIP 452.7843-001
CH550 MANTLE A 452.7626-001
CH550 CONCAVE C 452.8500-001
CH550 FILLER RING C 452.7388-001
CH550 CONCAVE MC 452.8496-001
CH550 CONCAVE M 452.8601-001
CH550 FILLER RING M 452.7386-001
CH550 MANTLE FF BG00133846-01
Jaquess 36X48 Jaw
Our Customer would like to fill both ends to 18" F.I.E.
Just like in the photo, this design will be more durable。
If the crusher operates in very abrasive conditions at a very tight css then bottom of the jaws wear very quickly, fill jaw at both ends will help. But when you crush rock it expands by volume, corrugations allow this to occur, with this type of jaw enormous stress is transferred into the lower jaw frame and pitman/ bearings.
If rock is abrasive and soft no big deal, if its abrasive and tough, it can cause big issues.
We saw this problem with 50X60 Jaw at Huzhou quarry outside Shanghai.
So if possible good to know actual application and type of rock to decide best option.
Nip angle in crushing chamber is very important, smaller the better which is why thicker jaws with curve are requested by many people.
10 one of bogvik’s strongest product categories is plates made of manganese s...Fernando Zhang
One of Bogvik’s strongest product categories is plates made of manganese steel for jaw crushers.
This year, BOGVIK launched a new product — BOGVIK TIC plates. These are linings made of the standard alloys C, D and D1 but are reinforced with titanium carbide inserts. They show higher resistance to shock loads and cracking. This effect is achieved by special casting processes and heat treatment of the finished product, and the base alloy is selected in accordance with a rock type.
During the tests, the linings with inserts boasted an operating time that was 1.5 to 4 times more than that of classic manganese steel wear parts without inserts.
If you seek solutions to increase the intervals between plate replacement, reduce the number of maintenance stops, and lower your unit production costs — BOGVIK is what you need.
Contact our crushing&screening department to request individual solutions at: sales@bogvik.com
01 bogvik customizes the sandvik ch550 for customers with different chamber l...Fernando Zhang
BOGVIK customizes the CH550 for customers with different Chamber liners
CH550 CONCAVE F 452.8600-001
CH550 MANTLE B 452.8602-001
CH550 CONCAVE EC TOP GRIP 452.7843-001
CH550 MANTLE A 452.7626-001
CH550 CONCAVE C 452.8500-001
CH550 FILLER RING C 452.7388-001
CH550 CONCAVE MC 452.8496-001
CH550 CONCAVE M 452.8601-001
CH550 FILLER RING M 452.7386-001
CH550 MANTLE FF BG00133846-01
OzLinc Industries supply a variety of marine fittings, hose, clamps, valves and pipe to the Australian mining, fire fighting, infrastructure and marine industries.
OzLinc Industries supply a variety of marine fittings, hose, clamps, valves and pipe to the Australian mining, fire fighting, infrastructure and marine industries.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.