Linear functions
•Download as PPTX, PDF•
0 likes•232 views
This document discusses how to graph a line from an equation. It provides the steps to plot the y-intercept, then rise by the slope and run right to plot additional points and connect them with a line with arrows at each end. The key pieces of information are the equation y=2/3x-4, the y-intercept is (0,-4), and the steps are to plot the y-intercept and then rise by the slope of 2/3 and run right 3 to plot additional points and draw the line.
Report
Share
Report
Share
Recommended
Linear functions
This document provides steps for graphing a line from an equation. It explains that the equation must be solved for y and defines the slope as "rise over run" and the y-intercept as b. The specific equation given is y=2/3x-4. It provides instructions to plot the y-intercept at (0,-4), then rise 2 and go right 3 to plot additional points and connect them with a line and arrows.
Ml lesson 4 7
The document discusses graphing lines using slope-intercept form. It provides examples of finding the slope and y-intercept of lines given their equations or points on the line. It also gives examples of writing equations of lines given the slope and y-intercept or a graph of the line. Finally, it discusses parallel lines and how they have the same slope.
Finding The Slope And Y Intercept
The document discusses how to identify the slope and y-intercept of a line given in standard form. It shows working through examples of changing lines from standard form (Ax + By = C) to slope-intercept form (y = mx + b). Through solving the equations for y, the slope (m) and y-intercept (b) can be determined. Graphing lines on a coordinate plane is also demonstrated.
Graphing lines using slopeintercept
This document provides information about graphing lines using slope-intercept form. It defines slope-intercept form as y=mx+b, where m is the slope and b is the y-intercept. It shows how to find the slope and y-intercept from linear equations in various forms and how to write equations in slope-intercept form. It also demonstrates how to graph lines by plotting points using the slope and y-intercept. Key steps for graphing include finding the slope and y-intercept, plotting the y-intercept, using the slope to determine other points, and drawing the line through the points. The document also discusses parallel lines as those with the same slope.
Slope intercept
The document discusses converting linear equations to slope-intercept form (y=mx+b). It provides examples of converting equations like 2x+1, 5y=10x+15, and -3y=-9x-12 to slope-intercept form and finding the slope and y-intercept. It also defines x-intercept and y-intercept and shows how to find them by letting x=0 or y=0 and solving the equation.
Y = mx + c
The document discusses the standard equation of a straight line, y = mx + c, where m is the gradient and c is the y-intercept. It provides examples of finding the equation of a line given m and the y-intercept, or two points on the line. The document also discusses finding the angle a line makes with the x-axis given its gradient, and the special cases of horizontal and vertical lines where the equation is either y = b or x = a, respectively.
Slopeinterceptform
Slope-intercept form is represented by the equation y=mx+b, where m is the slope and b is the y-intercept. There are three methods to find the slope: rise over run, change in y over change in x, and point-slope formula. The slope tells the rate of change, while the y-intercept is the initial value when x=0. To graph a line in slope-intercept form, you plot the y-intercept and then use the slope to trace successive points on the line by calculating the rise over run at each interval of x. Word problems can be modeled using this form by identifying the independent and dependent variables and finding their relationship through calculating slope from ordered pairs of known values.
Module Four Lesson 2 Remediation Notes - Slope intercept form
Slope-intercept form is represented by the equation y=mx+b, where m is the slope and b is the y-intercept. There are three methods to find the slope: rise over run, change in y over change in x, and point-slope formula. The slope tells the rate of change, while the y-intercept is the initial value when x=0. To graph a line in slope-intercept form, you plot the y-intercept and then use the slope to trace successive points on the line by calculating the rise over run at each interval. Word problems can be modeled using this form by identifying the independent and dependent variables and finding their relationship through calculating slope from ordered pairs of known values.
Recommended
Linear functions
This document provides steps for graphing a line from an equation. It explains that the equation must be solved for y and defines the slope as "rise over run" and the y-intercept as b. The specific equation given is y=2/3x-4. It provides instructions to plot the y-intercept at (0,-4), then rise 2 and go right 3 to plot additional points and connect them with a line and arrows.
Ml lesson 4 7
The document discusses graphing lines using slope-intercept form. It provides examples of finding the slope and y-intercept of lines given their equations or points on the line. It also gives examples of writing equations of lines given the slope and y-intercept or a graph of the line. Finally, it discusses parallel lines and how they have the same slope.
Finding The Slope And Y Intercept
The document discusses how to identify the slope and y-intercept of a line given in standard form. It shows working through examples of changing lines from standard form (Ax + By = C) to slope-intercept form (y = mx + b). Through solving the equations for y, the slope (m) and y-intercept (b) can be determined. Graphing lines on a coordinate plane is also demonstrated.
Graphing lines using slopeintercept
This document provides information about graphing lines using slope-intercept form. It defines slope-intercept form as y=mx+b, where m is the slope and b is the y-intercept. It shows how to find the slope and y-intercept from linear equations in various forms and how to write equations in slope-intercept form. It also demonstrates how to graph lines by plotting points using the slope and y-intercept. Key steps for graphing include finding the slope and y-intercept, plotting the y-intercept, using the slope to determine other points, and drawing the line through the points. The document also discusses parallel lines as those with the same slope.
Slope intercept
The document discusses converting linear equations to slope-intercept form (y=mx+b). It provides examples of converting equations like 2x+1, 5y=10x+15, and -3y=-9x-12 to slope-intercept form and finding the slope and y-intercept. It also defines x-intercept and y-intercept and shows how to find them by letting x=0 or y=0 and solving the equation.
Y = mx + c
The document discusses the standard equation of a straight line, y = mx + c, where m is the gradient and c is the y-intercept. It provides examples of finding the equation of a line given m and the y-intercept, or two points on the line. The document also discusses finding the angle a line makes with the x-axis given its gradient, and the special cases of horizontal and vertical lines where the equation is either y = b or x = a, respectively.
Slopeinterceptform
Slope-intercept form is represented by the equation y=mx+b, where m is the slope and b is the y-intercept. There are three methods to find the slope: rise over run, change in y over change in x, and point-slope formula. The slope tells the rate of change, while the y-intercept is the initial value when x=0. To graph a line in slope-intercept form, you plot the y-intercept and then use the slope to trace successive points on the line by calculating the rise over run at each interval of x. Word problems can be modeled using this form by identifying the independent and dependent variables and finding their relationship through calculating slope from ordered pairs of known values.
Module Four Lesson 2 Remediation Notes - Slope intercept form
Slope-intercept form is represented by the equation y=mx+b, where m is the slope and b is the y-intercept. There are three methods to find the slope: rise over run, change in y over change in x, and point-slope formula. The slope tells the rate of change, while the y-intercept is the initial value when x=0. To graph a line in slope-intercept form, you plot the y-intercept and then use the slope to trace successive points on the line by calculating the rise over run at each interval. Word problems can be modeled using this form by identifying the independent and dependent variables and finding their relationship through calculating slope from ordered pairs of known values.
Graphing a line using slope intercept.pdf
This document explains how to graph a line using the slope-intercept form y=mx+b, where m is the slope and b is the y-intercept. It gives the example of the line with slope -2/3 and y-intercept 6, so the equation is y=-2/3x+6. To graph this line, you plot the y-intercept point (0,6) and then find the next point by moving down 2 units and right 3 units, and connect the two points with a straight line with arrows on the ends.
Paso 3 profundizar y contextualizar el conocimiento de la unidad 2.
The document discusses trigonometric identities. It defines several types of identities, including quotient identities obtained from tangent and cotangent definitions, and reciprocal identities obtained from secant, cosecant, and tangent definitions in relation to cotangent. Examples are provided of applying trigonometric functions and identities to solve equations and find unknown sides of geometric figures using laws of sines and cosines. Decomposition identities for sums and differences of trigonometric functions are also presented.
คาบ2 2
The document provides instructions for writing and graphing linear equations in slope-intercept form (y = mx + b). It defines key terms like slope (m), y-intercept (b), and parallel lines. Examples are given for writing equations from slope and y-intercept, graphing lines on a coordinate plane, and determining if two lines are parallel based on having the same slope. Key steps are outlined for graphing a line passing through a given point with a given slope.
Identifying slope and y intercept
The document discusses the equation of a line, y=mx+b, and its key components of slope and y-intercept. It defines slope as the rate of rise or fall of a line and provides the formula to calculate it between two points. It also defines the y-intercept as the point where the line crosses the y-axis. The document provides examples of lines with their slopes and y-intercepts calculated from points and used to write the equation of the line.
2.8 coord. plane 1
The document provides examples and explanations for using the coordinate plane:
- It defines the key elements of the coordinate plane including the x-axis, y-axis, origin, quadrants, and ordered pairs used to identify points.
- An example shows how to plot the point (4, -2) by moving right 4 units and down 2 units from the origin.
- Another example solves a multi-step problem to find the perimeter of a rectangular region on a coordinate plane by identifying the coordinates of its vertices and calculating the length and width.
January 9, 2014
The document provides information about linear equations and graphs:
- It defines the slope formula for finding the slope between two points on a line.
- It explains the slope-intercept form of a linear equation where y=mx+b, with m being the slope and b being the y-intercept.
- It gives examples of writing equations in slope-intercept form and graphing lines from their equations.
- It discusses other forms like point-slope form and how to write equations of lines given characteristics like a point and slope.
- It defines parallel and perpendicular lines based on their slopes being equal or negative reciprocals, respectively.
Slope and y intercept
This document discusses slope, y-intercept, and how to find and graph linear equations. It defines slope as the ratio that describes a line's tilt and explains how to calculate slope using rise over run between two points on a line. It also discusses how to find the y-intercept, and then use slope and y-intercept to write the equation of a line in y=mx+b form. Examples are provided for finding slope from tables of values and graphing linear equations on a coordinate plane.
Finding slope
This is a ppt for learning how to calculate the slope of a line within a line graph. This ppt works for about a 8th t 9th grade level.
Magic square made easy
Magic Square in 3 easy steps:
1. Form a square matrix with numbers 1 to n^2 in sequence, where n is the order of the magic square.
2. Form two matrices of the same size, one for identifying rows and one for columns, with middle columns numbered 1 to n and columns on either side getting smaller or larger by 1.
3. Superimpose the row and column matrices to find the number in each cell of the final magic square matrix from the corresponding entries in the first matrix.
Stair on slope of a line
This document discusses the concept of slope and how to calculate it. It defines slope as measuring the steepness of a line and explains that it is calculated by finding the rise over the run between two points on a line. The document then provides examples of slopes for lines that are positive, negative, zero, and undefined (vertical) and shows the corresponding graphs in slope-intercept form. It concludes with practice problems calculating slope from graphs, equations, and point pairs.
Review Of Slope And The Slope Intercept Formula
The document reviews slope and the slope-intercept formula y=mx+b. It provides examples of finding the slope and y-intercept of various lines given their graphs or two points on the line. It also demonstrates how to write the equation of a line given two points and how to find the x- and y-intercepts of a line given its equation.
5.4 Slope Intercept Form
The document discusses slope-intercept form of linear equations. It provides examples of finding the x- and y-intercepts of lines and writing equations of lines given slopes and points. Key terms defined include slope-intercept form and examples are given of finding the equation of a line from two points and from a given slope and point.
Writing linear equations KG Math Middle School
The document provides information about graphing and writing linear equations in slope-intercept form (y=mx+b). It defines slope and y-intercept, and explains how to graph lines by using the slope and y-intercept. It also demonstrates how to write an equation of a line when given the slope and y-intercept, a point and the slope, or two points. Key steps include finding the slope using the formula (m=(y2-y1)/(x2-x1)), setting up and solving equations to find the y-intercept, and plugging the slope and y-intercept into the slope-intercept form to write the equation.
5.4 Slope Intercept Form Part B
The document provides examples and practice problems for writing equations of lines in slope-intercept form (y=mx+b) by given the slope and y-intercept or two points on the line. It demonstrates how to find the slope from two points, the y-intercept from the slope and a given point, and how to write the final equation. Multiple examples are worked through step-by-step for writing equations of lines from their graphs, slopes, y-intercepts and point pairs.
Slope intercept form2
The document provides examples and explanations of key concepts related to linear functions in slope-intercept form (y = mx + b). It includes examples of finding the slope and y-intercept from graphs, equations, and point pairs. Practice problems are provided for students to identify slopes, match equations to graphs, find the equation from two points, and determine if a relationship represents a function.
Slope intercept form3
The document provides examples and explanations of key concepts related to linear functions in slope-intercept form (y = mx + b). It includes examples of finding the slope and y-intercept from graphs, equations, and point pairs. Practice problems are provided for students to identify slopes, match equations to graphs, find the equation from two points, and determine if a relationship represents a function.
Algebra Bench2
The document defines X and Y intercepts and describes how to find them. The Y-intercept is the value of Y when the line crosses the Y-axis, and can be found by plugging the slope and a point into the linear equation y=mx+b and solving for b. The X-intercept is the value of X when the line crosses the X-axis, and can be found by plugging 0 for Y into the linear equation and solving for X. An example demonstrates finding the Y-intercept of 7 and the X-intercept of 3.5 for the equation y=-2x+7.
Number system
- A number line consists of several types of numbers including natural numbers, whole numbers, integers, rational numbers, and irrational numbers.
- Rational numbers can be written as fractions p/q, while irrational numbers cannot. When writing decimals, rational numbers will either terminate or repeat, while irrational numbers will not terminate or repeat.
- There are methods to convert between rational numbers written as decimals and as fractions by multiplying or subtracting terms and solving for the value of the decimal. Geometric constructions can also represent irrational numbers.
March 12 Forms Of Lines
There are three forms of lines: slope-intercept form (y=mx+b), standard form (ax+by+c=0), and neither of the above. Slope-intercept form provides the slope and y-intercept in a simple way. Standard form writes the line as a polynomial with everything on one side of the equation and x positive. Standard form can be found by converting slope-intercept form or by knowing two points that the line passes through.
Chapter 1 test 2012- 2013
This document contains 30 multiple choice questions assessing mathematical concepts related to integers, absolute value, order of operations, and properties of operations. The questions cover identifying numbers and their absolute values, evaluating expressions using order of operations, plotting numbers on a number line, finding additive inverses, and applying properties of integer operations such as addition, subtraction, and multiplication to solve problems.
For blended learning workshop ppt 2003 again
This document discusses blended learning, which combines online digital media with traditional classroom methods. It examines what blended learning is, why blended models are effective, and how various activities can be incorporated into the online and offline components. The document is separated into sections about the definition, benefits, and implementation of blended instructional approaches.
Combining like terms
The document defines exponents and provides examples of multiplying and combining like terms with exponents. It explains that to multiply terms, you multiply the coefficients and add the exponents of like terms. It provides examples of multiplying, combining, and dividing like terms with variables and exponents.
More Related Content
What's hot
Graphing a line using slope intercept.pdf
This document explains how to graph a line using the slope-intercept form y=mx+b, where m is the slope and b is the y-intercept. It gives the example of the line with slope -2/3 and y-intercept 6, so the equation is y=-2/3x+6. To graph this line, you plot the y-intercept point (0,6) and then find the next point by moving down 2 units and right 3 units, and connect the two points with a straight line with arrows on the ends.
Paso 3 profundizar y contextualizar el conocimiento de la unidad 2.
The document discusses trigonometric identities. It defines several types of identities, including quotient identities obtained from tangent and cotangent definitions, and reciprocal identities obtained from secant, cosecant, and tangent definitions in relation to cotangent. Examples are provided of applying trigonometric functions and identities to solve equations and find unknown sides of geometric figures using laws of sines and cosines. Decomposition identities for sums and differences of trigonometric functions are also presented.
คาบ2 2
The document provides instructions for writing and graphing linear equations in slope-intercept form (y = mx + b). It defines key terms like slope (m), y-intercept (b), and parallel lines. Examples are given for writing equations from slope and y-intercept, graphing lines on a coordinate plane, and determining if two lines are parallel based on having the same slope. Key steps are outlined for graphing a line passing through a given point with a given slope.
Identifying slope and y intercept
The document discusses the equation of a line, y=mx+b, and its key components of slope and y-intercept. It defines slope as the rate of rise or fall of a line and provides the formula to calculate it between two points. It also defines the y-intercept as the point where the line crosses the y-axis. The document provides examples of lines with their slopes and y-intercepts calculated from points and used to write the equation of the line.
2.8 coord. plane 1
The document provides examples and explanations for using the coordinate plane:
- It defines the key elements of the coordinate plane including the x-axis, y-axis, origin, quadrants, and ordered pairs used to identify points.
- An example shows how to plot the point (4, -2) by moving right 4 units and down 2 units from the origin.
- Another example solves a multi-step problem to find the perimeter of a rectangular region on a coordinate plane by identifying the coordinates of its vertices and calculating the length and width.
January 9, 2014
The document provides information about linear equations and graphs:
- It defines the slope formula for finding the slope between two points on a line.
- It explains the slope-intercept form of a linear equation where y=mx+b, with m being the slope and b being the y-intercept.
- It gives examples of writing equations in slope-intercept form and graphing lines from their equations.
- It discusses other forms like point-slope form and how to write equations of lines given characteristics like a point and slope.
- It defines parallel and perpendicular lines based on their slopes being equal or negative reciprocals, respectively.
Slope and y intercept
This document discusses slope, y-intercept, and how to find and graph linear equations. It defines slope as the ratio that describes a line's tilt and explains how to calculate slope using rise over run between two points on a line. It also discusses how to find the y-intercept, and then use slope and y-intercept to write the equation of a line in y=mx+b form. Examples are provided for finding slope from tables of values and graphing linear equations on a coordinate plane.
Finding slope
This is a ppt for learning how to calculate the slope of a line within a line graph. This ppt works for about a 8th t 9th grade level.
Magic square made easy
Magic Square in 3 easy steps:
1. Form a square matrix with numbers 1 to n^2 in sequence, where n is the order of the magic square.
2. Form two matrices of the same size, one for identifying rows and one for columns, with middle columns numbered 1 to n and columns on either side getting smaller or larger by 1.
3. Superimpose the row and column matrices to find the number in each cell of the final magic square matrix from the corresponding entries in the first matrix.
Stair on slope of a line
This document discusses the concept of slope and how to calculate it. It defines slope as measuring the steepness of a line and explains that it is calculated by finding the rise over the run between two points on a line. The document then provides examples of slopes for lines that are positive, negative, zero, and undefined (vertical) and shows the corresponding graphs in slope-intercept form. It concludes with practice problems calculating slope from graphs, equations, and point pairs.
Review Of Slope And The Slope Intercept Formula
The document reviews slope and the slope-intercept formula y=mx+b. It provides examples of finding the slope and y-intercept of various lines given their graphs or two points on the line. It also demonstrates how to write the equation of a line given two points and how to find the x- and y-intercepts of a line given its equation.
5.4 Slope Intercept Form
The document discusses slope-intercept form of linear equations. It provides examples of finding the x- and y-intercepts of lines and writing equations of lines given slopes and points. Key terms defined include slope-intercept form and examples are given of finding the equation of a line from two points and from a given slope and point.
Writing linear equations KG Math Middle School
The document provides information about graphing and writing linear equations in slope-intercept form (y=mx+b). It defines slope and y-intercept, and explains how to graph lines by using the slope and y-intercept. It also demonstrates how to write an equation of a line when given the slope and y-intercept, a point and the slope, or two points. Key steps include finding the slope using the formula (m=(y2-y1)/(x2-x1)), setting up and solving equations to find the y-intercept, and plugging the slope and y-intercept into the slope-intercept form to write the equation.
5.4 Slope Intercept Form Part B
The document provides examples and practice problems for writing equations of lines in slope-intercept form (y=mx+b) by given the slope and y-intercept or two points on the line. It demonstrates how to find the slope from two points, the y-intercept from the slope and a given point, and how to write the final equation. Multiple examples are worked through step-by-step for writing equations of lines from their graphs, slopes, y-intercepts and point pairs.
Slope intercept form2
The document provides examples and explanations of key concepts related to linear functions in slope-intercept form (y = mx + b). It includes examples of finding the slope and y-intercept from graphs, equations, and point pairs. Practice problems are provided for students to identify slopes, match equations to graphs, find the equation from two points, and determine if a relationship represents a function.
Slope intercept form3
The document provides examples and explanations of key concepts related to linear functions in slope-intercept form (y = mx + b). It includes examples of finding the slope and y-intercept from graphs, equations, and point pairs. Practice problems are provided for students to identify slopes, match equations to graphs, find the equation from two points, and determine if a relationship represents a function.
Algebra Bench2
The document defines X and Y intercepts and describes how to find them. The Y-intercept is the value of Y when the line crosses the Y-axis, and can be found by plugging the slope and a point into the linear equation y=mx+b and solving for b. The X-intercept is the value of X when the line crosses the X-axis, and can be found by plugging 0 for Y into the linear equation and solving for X. An example demonstrates finding the Y-intercept of 7 and the X-intercept of 3.5 for the equation y=-2x+7.
Number system
- A number line consists of several types of numbers including natural numbers, whole numbers, integers, rational numbers, and irrational numbers.
- Rational numbers can be written as fractions p/q, while irrational numbers cannot. When writing decimals, rational numbers will either terminate or repeat, while irrational numbers will not terminate or repeat.
- There are methods to convert between rational numbers written as decimals and as fractions by multiplying or subtracting terms and solving for the value of the decimal. Geometric constructions can also represent irrational numbers.
March 12 Forms Of Lines
There are three forms of lines: slope-intercept form (y=mx+b), standard form (ax+by+c=0), and neither of the above. Slope-intercept form provides the slope and y-intercept in a simple way. Standard form writes the line as a polynomial with everything on one side of the equation and x positive. Standard form can be found by converting slope-intercept form or by knowing two points that the line passes through.
Chapter 1 test 2012- 2013
This document contains 30 multiple choice questions assessing mathematical concepts related to integers, absolute value, order of operations, and properties of operations. The questions cover identifying numbers and their absolute values, evaluating expressions using order of operations, plotting numbers on a number line, finding additive inverses, and applying properties of integer operations such as addition, subtraction, and multiplication to solve problems.
What's hot (20)
Paso 3 profundizar y contextualizar el conocimiento de la unidad 2.
Paso 3 profundizar y contextualizar el conocimiento de la unidad 2.
Viewers also liked
For blended learning workshop ppt 2003 again
This document discusses blended learning, which combines online digital media with traditional classroom methods. It examines what blended learning is, why blended models are effective, and how various activities can be incorporated into the online and offline components. The document is separated into sections about the definition, benefits, and implementation of blended instructional approaches.
Combining like terms
The document defines exponents and provides examples of multiplying and combining like terms with exponents. It explains that to multiply terms, you multiply the coefficients and add the exponents of like terms. It provides examples of multiplying, combining, and dividing like terms with variables and exponents.
Mod 6 top3solveand graph inequalities
This document discusses solving and graphing linear inequalities with one variable. It provides examples of solving inequalities by adding or subtracting like terms and dividing by constants. When dividing an inequality by a negative number, the direction of the inequality symbol flips. The document also discusses graphing inequalities on a number line or coordinate plane. Closed inequalities with <= or >= are graphed as solid lines, while open inequalities with < or > are graphed as dashed lines. The region shaded depends on which side of the line the test point (0,0) falls in.
Budgeting2
This document discusses various concepts related to budgeting in higher education, including:
1) It examines the flow of funds from the perspective of a university campus using the University of Illinois at Urbana-Champaign as an example.
2) It discusses the distinction between operating budgets which cover annual activities and capital budgets which are for new buildings or major renovations.
3) It also distinguishes between "soft money" sources like grants and gifts which are non-recurrent versus "hard money" or recurrent sources of funding for activities.
Top banana blues
Capture of Slidecast done for a 16 x 9 version is no available at YouTube:
http://youtu.be/9Hw9aiOvoiw
A verse about excessive CEO compensation to the tune of Beggar's Blues by Duke Ellington
Solving equations
This document discusses how to solve different types of equations: equations with one variable, more than one variable, and equations that can be written in the form of y = mx + b. It provides examples of solving equations with one variable by using the subtraction and division properties, and examples of solving equations for y in terms of x by isolating y and using the division property. Mastering these techniques is important for upcoming modules dealing with more advanced equation solving.
Simple quiz
This document lists various famous people and notes they were all born in 1955. It suggests 1955 was a very good year and was produced by Dr. Obscuro.
BIOS 275:KERI SHEA: ISGRIGG
This document lists various plants, animals, and other organisms observed in southern Ohio habitats such as Dow Lake, Strouds Run State Park, and the Hocking River. Some of the organisms listed include the black swallowtail butterfly, eastern box turtle, red-winged blackbird, Christmas fern, white tail deer, raccoon, bumble bee, robin, hawk, blue heron, Canadian geese, river clam, mallard, and various other plants, mushrooms, insects, fish and more. The document provides names and sometimes images of organisms found in freshwater lakes, forests, and rivers in southern Ohio.
Viewers also liked (8)
Recently uploaded
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Building RAG with self-deployed Milvus vector database and Snowpark Container...
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsCommunications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Recently uploaded (20)
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Building RAG with self-deployed Milvus vector database and Snowpark Container...
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Monitoring Java Application Security with JDK Tools and JFR Events
Monitoring Java Application Security with JDK Tools and JFR Events
Linear functions
- 3. X Y -1 1 0 3 1 5 2 7
- 4. Equation must be solved for y= Given: 2x – 3y = 12 -3y = -2x +12 y = 2/3 x -4
- 5. Y = m x + b Where m = slope = rise run The y-intercept is b.
- 6. Y=2/3x -4 1) Plot the y intercept: (0, -4) 2) Starting from THAT intercept , rise 2 and then go right 3. Plot this new point. 3) Repeat step 2. 4) Using a ruler, draw a line, with arrows at each end!