Lesson 6 - NodeMCU with PWM Pin
•
0 likes•105 views
Lesson 6 - NodeMCU with PWM Pin كورس تعلم شريحة NodeMCU وكيفيه استخدامها مع الحساسات. Course Contents: 1- What is NodeMCU. 2- NodeMCU Instillation in Arduino IDE. 3- Simple Projects with NodeMCU (Sensors & Actuators) 4- NodeMCU with Communication protocols. 5- Connection NodeMCU with Wi-Fi. 6- Use NodeMCU as Clients & Server. 7- Different Platform uses with IOT application.
Report
Share
Report
Share
Download to read offline
Recommended
lesson4 - NodeMCU control led
كورس تعلم شريحة NodeMCU وكيفيه استخدامها مع الحساسات.
Course Contents:
1- What is NodeMCU.
2- NodeMCU Instillation in Arduino IDE.
3- Simple Projects with NodeMCU (Sensors & Actuators)
4- NodeMCU with Communication protocols.
5- Connection NodeMCU with Wi-Fi.
6- Use NodeMCU as Clients & Server.
7- Different Platform uses with IOT application
Lesson 7- NodeMCU with DC Motor
Lesson 7- NodeMCU with DC Motor
كورس تعلم شريحة NodeMCU وكيفيه استخدامها مع الحساسات.
Course Contents:
1- What is NodeMCU.
2- NodeMCU Instillation in Arduino IDE.
3- Simple Projects with NodeMCU (Sensors & Actuators)
4- NodeMCU with Communication protocols.
5- Connection NodeMCU with Wi-Fi.
6- Use NodeMCU as Clients & Server.
7- Different Platform uses with IOT application.
Test Driving AngularJS
The document discusses testing AngularJS applications. It emphasizes that unit testing the front-end is as important as the back-end. It lists features of AngularJS like data binding, directives, controllers and validation that enable testability. It also provides resources for learning more including the author's blog and contact information.
Generate pwm signal through arduino of various duty
The document summarizes a minor project on generating PWM signals of various duty cycles using an Arduino. It discusses how PWM works by rapidly switching a signal on and off to simulate variable voltages. The project uses an Arduino to generate PWM signals at 25%, 50%, 75%, and 100% duty cycles that control the brightness of an LED. The circuit diagram and components used are listed, along with advantages of PWM like low power loss and applications like dimming LEDs and controlling motor speed.
Ni project presentation version 3
The document summarizes a project using a National Instruments Single Board RIO General Purpose Inverter Controller (GPIC) to implement a 3-phase inverter and variable frequency drive. It describes the hardware components, LabVIEW code, simulations, challenges faced, and solutions implemented. The project involved using the GPIC Inverter Research Board to generate 3-phase AC power from DC to drive a motor, with the goal of implementing variable frequency control. Various issues were addressed, such as insufficient voltage levels, sensor faults, and transformer limitations.
Speed control of D.C motor using Pusle width modulation
It's a much efficient way of controlling the speed of the D.C motor using the 555 timer IC. One of the pulse modulation techniques known as the pulse width modulation is applied. The 555 timer IC is made to function in astable mode to achieve this feat.
Qt arduino serial_port
The Qt GUI for Arduino is an application that allows to connect Arduino Uno/Mega boards with Desktop operating systems like(Windows,Ubuntu,Macintosh)in an easy way, the communication between Arduino and computer happens over Serial Port channel.Arduino and computer are connected by USB.Arduino uses digital pins 0 (RX) and 1 (TX),for serial port communication. It is easy to create a customizable HMI(Human Machine Interface) using Qt Widgets like Slider,Dial,Label and over 50 other GUI controls available in the library. Qt Widgets can serve both as IO(Input and Output) to the Arduino, two cases are studied for visualizing the input and output data. sending serial commands from Qt GUI to Arduino,and receiving the serial stream data coming from Arduino to computer finally displaying it on Qt GUI.
Case1: Qt GUI as Input to Arduino Microcontroller(Control brightness of LED.)
Create a custom graphical user interface (Qt GUI), that can communicate with Arduino Serial port, and facilitate brightness control of an LED .
Case 2: Qt GUI as Display screen(Ouput Device)Read RPM of a DC Motor
Create a custom graphical user interface (GUI), that can communicate with Arduino by reading RPM of a Motor.By reading the serial stream data coming from Arduino to Desktop GUI can be updated with the motor RPM.
Lesson 10- NodeMCU with LCD I2C
Lesson 10- NodeMCU with LCD I2C
كورس تعلم شريحة NodeMCU وكيفيه استخدامها مع الحساسات.
Course Contents:
1- What is NodeMCU.
2- NodeMCU Instillation in Arduino IDE.
3- Simple Projects with NodeMCU (Sensors & Actuators)
4- NodeMCU with Communication protocols.
5- Connection NodeMCU with Wi-Fi.
6- Use NodeMCU as Clients & Server.
7- Different Platform uses with IOT application.
-------------------------------------------------------------------------------------
https://www.youtube.com/watch?v=eHJhuHb_bIc&list=PLknlsmxJbiDAdp1HJub7-RNcAZg9Sbj3s
Email: elafe1888@gmail.com
linkden: www.linkedin.com/in/elaf-a-saeed-97bbb6150
facebook: https://www.facebook.com/profile.php?id=100004305557442
github: https://github.com/ElafAhmedSaeed
youtube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg
slideshare: https://www.slideshare.net/ElafASaeed
Slideplayer: https://slideplayer.com/search/?q=Elaf+A.Saeed
Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gmla=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09
Recommended
lesson4 - NodeMCU control led
كورس تعلم شريحة NodeMCU وكيفيه استخدامها مع الحساسات.
Course Contents:
1- What is NodeMCU.
2- NodeMCU Instillation in Arduino IDE.
3- Simple Projects with NodeMCU (Sensors & Actuators)
4- NodeMCU with Communication protocols.
5- Connection NodeMCU with Wi-Fi.
6- Use NodeMCU as Clients & Server.
7- Different Platform uses with IOT application
Lesson 7- NodeMCU with DC Motor
Lesson 7- NodeMCU with DC Motor
كورس تعلم شريحة NodeMCU وكيفيه استخدامها مع الحساسات.
Course Contents:
1- What is NodeMCU.
2- NodeMCU Instillation in Arduino IDE.
3- Simple Projects with NodeMCU (Sensors & Actuators)
4- NodeMCU with Communication protocols.
5- Connection NodeMCU with Wi-Fi.
6- Use NodeMCU as Clients & Server.
7- Different Platform uses with IOT application.
Test Driving AngularJS
The document discusses testing AngularJS applications. It emphasizes that unit testing the front-end is as important as the back-end. It lists features of AngularJS like data binding, directives, controllers and validation that enable testability. It also provides resources for learning more including the author's blog and contact information.
Generate pwm signal through arduino of various duty
The document summarizes a minor project on generating PWM signals of various duty cycles using an Arduino. It discusses how PWM works by rapidly switching a signal on and off to simulate variable voltages. The project uses an Arduino to generate PWM signals at 25%, 50%, 75%, and 100% duty cycles that control the brightness of an LED. The circuit diagram and components used are listed, along with advantages of PWM like low power loss and applications like dimming LEDs and controlling motor speed.
Ni project presentation version 3
The document summarizes a project using a National Instruments Single Board RIO General Purpose Inverter Controller (GPIC) to implement a 3-phase inverter and variable frequency drive. It describes the hardware components, LabVIEW code, simulations, challenges faced, and solutions implemented. The project involved using the GPIC Inverter Research Board to generate 3-phase AC power from DC to drive a motor, with the goal of implementing variable frequency control. Various issues were addressed, such as insufficient voltage levels, sensor faults, and transformer limitations.
Speed control of D.C motor using Pusle width modulation
It's a much efficient way of controlling the speed of the D.C motor using the 555 timer IC. One of the pulse modulation techniques known as the pulse width modulation is applied. The 555 timer IC is made to function in astable mode to achieve this feat.
Qt arduino serial_port
The Qt GUI for Arduino is an application that allows to connect Arduino Uno/Mega boards with Desktop operating systems like(Windows,Ubuntu,Macintosh)in an easy way, the communication between Arduino and computer happens over Serial Port channel.Arduino and computer are connected by USB.Arduino uses digital pins 0 (RX) and 1 (TX),for serial port communication. It is easy to create a customizable HMI(Human Machine Interface) using Qt Widgets like Slider,Dial,Label and over 50 other GUI controls available in the library. Qt Widgets can serve both as IO(Input and Output) to the Arduino, two cases are studied for visualizing the input and output data. sending serial commands from Qt GUI to Arduino,and receiving the serial stream data coming from Arduino to computer finally displaying it on Qt GUI.
Case1: Qt GUI as Input to Arduino Microcontroller(Control brightness of LED.)
Create a custom graphical user interface (Qt GUI), that can communicate with Arduino Serial port, and facilitate brightness control of an LED .
Case 2: Qt GUI as Display screen(Ouput Device)Read RPM of a DC Motor
Create a custom graphical user interface (GUI), that can communicate with Arduino by reading RPM of a Motor.By reading the serial stream data coming from Arduino to Desktop GUI can be updated with the motor RPM.
Lesson 10- NodeMCU with LCD I2C
Lesson 10- NodeMCU with LCD I2C
كورس تعلم شريحة NodeMCU وكيفيه استخدامها مع الحساسات.
Course Contents:
1- What is NodeMCU.
2- NodeMCU Instillation in Arduino IDE.
3- Simple Projects with NodeMCU (Sensors & Actuators)
4- NodeMCU with Communication protocols.
5- Connection NodeMCU with Wi-Fi.
6- Use NodeMCU as Clients & Server.
7- Different Platform uses with IOT application.
-------------------------------------------------------------------------------------
https://www.youtube.com/watch?v=eHJhuHb_bIc&list=PLknlsmxJbiDAdp1HJub7-RNcAZg9Sbj3s
Email: elafe1888@gmail.com
linkden: www.linkedin.com/in/elaf-a-saeed-97bbb6150
facebook: https://www.facebook.com/profile.php?id=100004305557442
github: https://github.com/ElafAhmedSaeed
youtube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg
slideshare: https://www.slideshare.net/ElafASaeed
Slideplayer: https://slideplayer.com/search/?q=Elaf+A.Saeed
Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gmla=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09
NodeMCU-LabActivity1.pdf
This document describes several experiments conducted using a NodeMCU board:
1. Blinking the onboard LED by setting the pin high and low in a loop. This taught using board pins in code.
2. Blinking external LEDs connected to pins D5, D6, D7 by setting them high and low. This taught the pin structure.
3. Printing data to the serial monitor by initializing the baud rate and printing text. This taught using the serial monitor.
4. Reading temperature from an LM35 sensor connected to an analog pin, calculating the temperature, and blinking an LED when the temperature changes. This taught using the LM35 sensor.
57
This summary provides the key details about the document in 3 sentences:
The document describes the implementation of a 1.2-V 500-MHz programmable gain amplifier (PGA) for high-definition video digitizers in a 65-nm CMOS process. The PGA uses a pseudo switched-capacitor architecture that buffers the video signal without switching during active video and uses the switched-capacitor circuitry for setup of the DC operating point during blanking periods. Simulation results show the PGA maintains -3dB bandwidth of 550 MHz and distortion of -60dB for a 30-MHz 850mVpp HD video signal while consuming 10.4mW power.
MVE brochure US
The document discusses the MVE soft starter, which provides powerful and reliable medium voltage motor starting. It offers extensive safety features and monitoring capabilities. It has a robust yet compact design and simplified user interface. Custom configurations are available to meet specific motor control and protection needs.
077 c211
This document discusses the implementation of space vector pulse width modulation (SVPWM) for a three-phase voltage source inverter using a field programmable gate array (FPGA). SVPWM techniques offer benefits over traditional sinusoidal PWM like reduced total harmonic distortion and improved voltage transfer. The FPGA implementation involves developing VHDL code to determine the switching times of the inverter transistors based on the reference voltage vector. Simulation results show the output line voltages and currents generated by the FPGA-controlled inverter driving an induction motor load have low distortion. FPGA implementation provides advantages over microprocessors like compact size, reliability, and fast design changes.
Design of a pwm based buck boost dc dc converter with parasitic resistance su...
The document describes a proposed design for a PWM buck-boost converter to drive LEDs for underground coal mine lighting. Simulation results are presented for arrays of 5 and 8 LEDs with and without closed-loop control. With control, the output voltage is maintained at 12V despite input voltage and load variations, improving stability for constant LED illumination over long periods. Tables show voltage, current, efficiency and ripple values obtained from MATLAB and PSIM simulations, demonstrating the converter meets requirements for stable LED operation.
shravani_UGC.pdf eferhgtrjtyj hgfdhrtsgsdgse
This document describes the design and implementation of a two-stage complementary metal oxide semiconductor (CMOS) operational amplifier using 45nm technology. It aims to examine the operational amplifier's performance under various parameters. The design process involves calculating transistor width-to-length ratios (W/L) to achieve specifications such as a gain of 80dB, phase margin, and power dissipation of less than a certain amount. Simulations including DC analysis, AC analysis, transient analysis, temperature analysis, and power analysis are performed in Tanner Tool to validate that the operational amplifier meets requirements and is stable under variations. The results show that the designed two-stage CMOS operational amplifier achieves the targeted 80dB gain and phase margin at a unity
[Case Study] 42.2 kW K-Electric Net Metering Services
The Client (Mr.Nizam Hashwani) procured services of Zorays SMC Pvt Limted to get the preinstalled 42.2kW solar power system tied with the K-Electric grid. This pre-installed system required retrofit to meet compliance with AEDB & K-Electric net-metering regulations.
lesson2 - Nodemcu course - NodeMCU dev Board
This document provides an overview of the NodeMCU course and ESP8266 development boards. It discusses the ESP8266 chip, the NodeMCU 1.0 development board, and the ESP8266 12-E NodeMCU kit. The ESP8266 is a low-cost WiFi-enabled microcontroller that is commonly used in IoT projects. It has an integrated TCP/IP stack and supports various protocols. The NodeMCU boards make it easy to program the ESP8266 chip and interface with inputs and outputs. The document describes the components and pinouts of the NodeMCU boards and how to interface with GPIO, I2C, SPI, PWM and analog pins.
HC24.29.625-IA-23-Wide-Ruhl-Intel_2012_NTV_iA
This document describes an IA-32 processor core designed to operate over a wide voltage range from near-threshold voltages to maximum voltage. Key points:
- The "Claremont" prototype core can operate from 0.5V to 1.1V, achieving a 4.5x reduction in energy per cycle at its optimal voltage of 0.45V compared to maximum voltage. It demonstrates reliable near-threshold voltage operation down to 0.38V.
- Novel circuit techniques like variation-aware logic pruning, interruptible sequentials, and 10T register files enable robust near-threshold operation. Multi-corner timing convergence and programmable delay buffers manage skew across the wide voltage range.
- The core
To control the dc motor speed using PWM from LabVIEW
The document describes an experiment to control the speed of a DC motor using pulse width modulation (PWM) from LabVIEW. It discusses interfacing an Arduino board with a DC motor and LabVIEW. The LabVIEW program sends new speed values to the Arduino, which converts them to integer bytes representing delay intervals to control the motor speed - higher delays mean lower speeds. The result is studying how to control the speed of a DC motor using LabVIEW.
sivachandran resume
Sivachandran is an electrical engineer with over 10 years of experience in protection relay testing, commissioning and maintenance of substations up to 500kV. He has specialized skills in testing devices from manufacturers such as Siemens, ABB, Areva and configuring protection schemes. Some of his project experience includes working on substations in Saudi Arabia for ABB and Hyundai. He is proficient in testing bays, panels, primary and secondary injection and working with automation systems like BCUs.
bluetooth controlled home automation using arduino by shubham sinha
This document describes a home automation system using an Arduino Uno, Bluetooth module, relays, and an Android app. The system allows remote control of appliances via a smartphone. It provides a circuit diagram and lists the hardware used, including the Arduino, Bluetooth module, relays, power supply, and switchboard. Advantages are convenience and energy savings. Disadvantages include limited range and number of devices controlled. The document discusses problems faced and solutions, and possibilities for future expansion using WiFi.
smart home automation system
Home automation or domestics is building automation for a home, called a smart home or smart house. A home automation system will monitor and/or control home attributes such as lighting, climate, entertainment systems, and appliances. It may also include home security such as access control and alarm systems.
Ardui no
This document provides an overview of microcontrollers and the Arduino platform. It discusses what a microcontroller is and some common types. It then introduces Arduino as an open-source prototyping platform using easy hardware and software. Several Arduino boards are described and the ATmega328p microcontroller chip is specified. The document outlines how to download the Arduino software and write programs. It provides examples of basic Arduino projects like blinking LEDs, reading sensors, and creating sounds.
arduinoworkshop-160204051621.pdf
This document provides an overview of microcontrollers and the Arduino platform. It discusses what a microcontroller is and some common types. It then introduces Arduino as an open-source prototyping platform using easy hardware and software. Several Arduino boards are described and the ATmega328p microcontroller chip is specified. The document outlines how to download the Arduino software and write programs. It provides examples of basic Arduino projects like blinking LEDs, reading sensors, and creating sounds.
Automatic Power Factor Correction Using Arduino Uno
It calculates the power factor of load using ZCD and an Arduino program based on P.F. it determines the
how much compensating element should be added to load to make P.F. near to unity. You can also add IoT to monitor the power consumption, Voltage, Current an P. F. of the load remotely.
Bosch Internship presentation
1) The document describes an internship project involving the development of a control strategy for torque control of a five-phase synchronous electric machine without using pulse-width modulation.
2) A variable width block commutation control algorithm was developed, modeled in Simulink, and tested to operate the machine from 0 to high RPM while limiting starting currents.
3) The control algorithm and power converter model were implemented on a dSPACE rapid prototyping system, and hardware components were integrated and tested on a laboratory test bench. The drive system was successfully operated to control the synchronous electric machine.
CMOS Analog IC design by Dr GS Javed - Refresher Course - Batch 1
Topics covered in the course
1. DC Biasing of the circuits
2. Circuits for reference voltage and current generation
-Voltage Regulator
-BGR
-LDO
-V-to-I
3. Precision Current References
4. Opamp design for Analog to digital converters
- OTA
- Buffer
- Unity Feedback OTA
- Layout design strategies – 2stage opamp + CMFB
5. Sense and Return mechanisms in Feedback circuits
- Current and Voltage circuits
6. Sub-Threshold Conduction
- Low voltage Operation
7. ADC Design and Simulation
-Near Nyquist performance of Opamp for ADC Circuits
-Spectral Analysis and No. of FFT Points for simulation
-Simulation time for performance
-Resistors – their variation and Calibration
-Switch design for S/H
-CDAC
8. On-Chip Inductors
Speed Control of DC Motor using Microcontroller
This document discusses a project to control the speed of a DC motor using a microcontroller and pulse width modulation. Specifically, it aims to vary the speed-torque relationship of a DC motor electronically using a microcontroller to generate high and low pulses that control motor speed. Pulse width modulation is identified as a technique that can be used to simulate variable voltages through variations in pulse width to achieve variable analog speed control. The document outlines the components used, including an H-bridge circuit and microcontroller, and discusses some limitations such as susceptibility to electromagnetic interference.
High_Voltage_RF_LDMOS_Technology_for_Broadcast_Applications_pub
This document summarizes the development of a high voltage RF LDMOS technology for broadcast applications with power levels of 300-500W. Key points:
1) A 40V and 50V RF LDMOS technology was developed with very wide bandwidth from 470-860 MHz, high ruggedness, and power levels 2x higher than previous 32V technology.
2) The technologies were optimized for high voltage operation through modifications to the drain extension, epitaxial layer, and shield design, achieving breakdown voltages of 90V and 110V.
3) Devices demonstrated best-in-class broadband performance including over 300W output power with 50-62% efficiency across the UHF band, and over 150W at -30
IOT NodeMCU - NodeMCU Webserver
IOT NodeMCU - NodeMCU Webserver
--------------------------------------------------------------------
Email: elafe1888@gmail.com
linkden: www.linkedin.com/in/elaf-a-saeed-97bbb6150
facebook: https://www.facebook.com/profile.php?id=100004305557442
twitter: https://twitter.com/ElafASaeed1
github: https://github.com/ElafAhmedSaeed
youtube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg
slideshare: https://www.slideshare.net/ElafASaeed
Slideplayer: https://slideplayer.com/search/?q=Elaf+A.Saeed
Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gmla=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09
IOT NodeMCU - Ubidots Platform to Turn on LEDs
IOT NodeMCU - Ubidots Platform to Turn on LEDs
------------------------------------------------------------------------------
Email: elafe1888@gmail.com
linkden: www.linkedin.com/in/elaf-a-saeed-97bbb6150
facebook: https://www.facebook.com/profile.php?id=100004305557442
twitter: https://twitter.com/ElafASaeed1
github: https://github.com/ElafAhmedSaeed
youtube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg
slideshare: https://www.slideshare.net/ElafASaeed
Slideplayer: https://slideplayer.com/search/?q=Elaf+A.Saeed
Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gmla=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09
More Related Content
Similar to Lesson 6 - NodeMCU with PWM Pin
NodeMCU-LabActivity1.pdf
This document describes several experiments conducted using a NodeMCU board:
1. Blinking the onboard LED by setting the pin high and low in a loop. This taught using board pins in code.
2. Blinking external LEDs connected to pins D5, D6, D7 by setting them high and low. This taught the pin structure.
3. Printing data to the serial monitor by initializing the baud rate and printing text. This taught using the serial monitor.
4. Reading temperature from an LM35 sensor connected to an analog pin, calculating the temperature, and blinking an LED when the temperature changes. This taught using the LM35 sensor.
57
This summary provides the key details about the document in 3 sentences:
The document describes the implementation of a 1.2-V 500-MHz programmable gain amplifier (PGA) for high-definition video digitizers in a 65-nm CMOS process. The PGA uses a pseudo switched-capacitor architecture that buffers the video signal without switching during active video and uses the switched-capacitor circuitry for setup of the DC operating point during blanking periods. Simulation results show the PGA maintains -3dB bandwidth of 550 MHz and distortion of -60dB for a 30-MHz 850mVpp HD video signal while consuming 10.4mW power.
MVE brochure US
The document discusses the MVE soft starter, which provides powerful and reliable medium voltage motor starting. It offers extensive safety features and monitoring capabilities. It has a robust yet compact design and simplified user interface. Custom configurations are available to meet specific motor control and protection needs.
077 c211
This document discusses the implementation of space vector pulse width modulation (SVPWM) for a three-phase voltage source inverter using a field programmable gate array (FPGA). SVPWM techniques offer benefits over traditional sinusoidal PWM like reduced total harmonic distortion and improved voltage transfer. The FPGA implementation involves developing VHDL code to determine the switching times of the inverter transistors based on the reference voltage vector. Simulation results show the output line voltages and currents generated by the FPGA-controlled inverter driving an induction motor load have low distortion. FPGA implementation provides advantages over microprocessors like compact size, reliability, and fast design changes.
Design of a pwm based buck boost dc dc converter with parasitic resistance su...
The document describes a proposed design for a PWM buck-boost converter to drive LEDs for underground coal mine lighting. Simulation results are presented for arrays of 5 and 8 LEDs with and without closed-loop control. With control, the output voltage is maintained at 12V despite input voltage and load variations, improving stability for constant LED illumination over long periods. Tables show voltage, current, efficiency and ripple values obtained from MATLAB and PSIM simulations, demonstrating the converter meets requirements for stable LED operation.
shravani_UGC.pdf eferhgtrjtyj hgfdhrtsgsdgse
This document describes the design and implementation of a two-stage complementary metal oxide semiconductor (CMOS) operational amplifier using 45nm technology. It aims to examine the operational amplifier's performance under various parameters. The design process involves calculating transistor width-to-length ratios (W/L) to achieve specifications such as a gain of 80dB, phase margin, and power dissipation of less than a certain amount. Simulations including DC analysis, AC analysis, transient analysis, temperature analysis, and power analysis are performed in Tanner Tool to validate that the operational amplifier meets requirements and is stable under variations. The results show that the designed two-stage CMOS operational amplifier achieves the targeted 80dB gain and phase margin at a unity
[Case Study] 42.2 kW K-Electric Net Metering Services
The Client (Mr.Nizam Hashwani) procured services of Zorays SMC Pvt Limted to get the preinstalled 42.2kW solar power system tied with the K-Electric grid. This pre-installed system required retrofit to meet compliance with AEDB & K-Electric net-metering regulations.
lesson2 - Nodemcu course - NodeMCU dev Board
This document provides an overview of the NodeMCU course and ESP8266 development boards. It discusses the ESP8266 chip, the NodeMCU 1.0 development board, and the ESP8266 12-E NodeMCU kit. The ESP8266 is a low-cost WiFi-enabled microcontroller that is commonly used in IoT projects. It has an integrated TCP/IP stack and supports various protocols. The NodeMCU boards make it easy to program the ESP8266 chip and interface with inputs and outputs. The document describes the components and pinouts of the NodeMCU boards and how to interface with GPIO, I2C, SPI, PWM and analog pins.
HC24.29.625-IA-23-Wide-Ruhl-Intel_2012_NTV_iA
This document describes an IA-32 processor core designed to operate over a wide voltage range from near-threshold voltages to maximum voltage. Key points:
- The "Claremont" prototype core can operate from 0.5V to 1.1V, achieving a 4.5x reduction in energy per cycle at its optimal voltage of 0.45V compared to maximum voltage. It demonstrates reliable near-threshold voltage operation down to 0.38V.
- Novel circuit techniques like variation-aware logic pruning, interruptible sequentials, and 10T register files enable robust near-threshold operation. Multi-corner timing convergence and programmable delay buffers manage skew across the wide voltage range.
- The core
To control the dc motor speed using PWM from LabVIEW
The document describes an experiment to control the speed of a DC motor using pulse width modulation (PWM) from LabVIEW. It discusses interfacing an Arduino board with a DC motor and LabVIEW. The LabVIEW program sends new speed values to the Arduino, which converts them to integer bytes representing delay intervals to control the motor speed - higher delays mean lower speeds. The result is studying how to control the speed of a DC motor using LabVIEW.
sivachandran resume
Sivachandran is an electrical engineer with over 10 years of experience in protection relay testing, commissioning and maintenance of substations up to 500kV. He has specialized skills in testing devices from manufacturers such as Siemens, ABB, Areva and configuring protection schemes. Some of his project experience includes working on substations in Saudi Arabia for ABB and Hyundai. He is proficient in testing bays, panels, primary and secondary injection and working with automation systems like BCUs.
bluetooth controlled home automation using arduino by shubham sinha
This document describes a home automation system using an Arduino Uno, Bluetooth module, relays, and an Android app. The system allows remote control of appliances via a smartphone. It provides a circuit diagram and lists the hardware used, including the Arduino, Bluetooth module, relays, power supply, and switchboard. Advantages are convenience and energy savings. Disadvantages include limited range and number of devices controlled. The document discusses problems faced and solutions, and possibilities for future expansion using WiFi.
smart home automation system
Home automation or domestics is building automation for a home, called a smart home or smart house. A home automation system will monitor and/or control home attributes such as lighting, climate, entertainment systems, and appliances. It may also include home security such as access control and alarm systems.
Ardui no
This document provides an overview of microcontrollers and the Arduino platform. It discusses what a microcontroller is and some common types. It then introduces Arduino as an open-source prototyping platform using easy hardware and software. Several Arduino boards are described and the ATmega328p microcontroller chip is specified. The document outlines how to download the Arduino software and write programs. It provides examples of basic Arduino projects like blinking LEDs, reading sensors, and creating sounds.
arduinoworkshop-160204051621.pdf
This document provides an overview of microcontrollers and the Arduino platform. It discusses what a microcontroller is and some common types. It then introduces Arduino as an open-source prototyping platform using easy hardware and software. Several Arduino boards are described and the ATmega328p microcontroller chip is specified. The document outlines how to download the Arduino software and write programs. It provides examples of basic Arduino projects like blinking LEDs, reading sensors, and creating sounds.
Automatic Power Factor Correction Using Arduino Uno
It calculates the power factor of load using ZCD and an Arduino program based on P.F. it determines the
how much compensating element should be added to load to make P.F. near to unity. You can also add IoT to monitor the power consumption, Voltage, Current an P. F. of the load remotely.
Bosch Internship presentation
1) The document describes an internship project involving the development of a control strategy for torque control of a five-phase synchronous electric machine without using pulse-width modulation.
2) A variable width block commutation control algorithm was developed, modeled in Simulink, and tested to operate the machine from 0 to high RPM while limiting starting currents.
3) The control algorithm and power converter model were implemented on a dSPACE rapid prototyping system, and hardware components were integrated and tested on a laboratory test bench. The drive system was successfully operated to control the synchronous electric machine.
CMOS Analog IC design by Dr GS Javed - Refresher Course - Batch 1
Topics covered in the course
1. DC Biasing of the circuits
2. Circuits for reference voltage and current generation
-Voltage Regulator
-BGR
-LDO
-V-to-I
3. Precision Current References
4. Opamp design for Analog to digital converters
- OTA
- Buffer
- Unity Feedback OTA
- Layout design strategies – 2stage opamp + CMFB
5. Sense and Return mechanisms in Feedback circuits
- Current and Voltage circuits
6. Sub-Threshold Conduction
- Low voltage Operation
7. ADC Design and Simulation
-Near Nyquist performance of Opamp for ADC Circuits
-Spectral Analysis and No. of FFT Points for simulation
-Simulation time for performance
-Resistors – their variation and Calibration
-Switch design for S/H
-CDAC
8. On-Chip Inductors
Speed Control of DC Motor using Microcontroller
This document discusses a project to control the speed of a DC motor using a microcontroller and pulse width modulation. Specifically, it aims to vary the speed-torque relationship of a DC motor electronically using a microcontroller to generate high and low pulses that control motor speed. Pulse width modulation is identified as a technique that can be used to simulate variable voltages through variations in pulse width to achieve variable analog speed control. The document outlines the components used, including an H-bridge circuit and microcontroller, and discusses some limitations such as susceptibility to electromagnetic interference.
High_Voltage_RF_LDMOS_Technology_for_Broadcast_Applications_pub
This document summarizes the development of a high voltage RF LDMOS technology for broadcast applications with power levels of 300-500W. Key points:
1) A 40V and 50V RF LDMOS technology was developed with very wide bandwidth from 470-860 MHz, high ruggedness, and power levels 2x higher than previous 32V technology.
2) The technologies were optimized for high voltage operation through modifications to the drain extension, epitaxial layer, and shield design, achieving breakdown voltages of 90V and 110V.
3) Devices demonstrated best-in-class broadband performance including over 300W output power with 50-62% efficiency across the UHF band, and over 150W at -30
Similar to Lesson 6 - NodeMCU with PWM Pin (20)
Design of a pwm based buck boost dc dc converter with parasitic resistance su...
Design of a pwm based buck boost dc dc converter with parasitic resistance su...
[Case Study] 42.2 kW K-Electric Net Metering Services
[Case Study] 42.2 kW K-Electric Net Metering Services
To control the dc motor speed using PWM from LabVIEW
To control the dc motor speed using PWM from LabVIEW
bluetooth controlled home automation using arduino by shubham sinha
bluetooth controlled home automation using arduino by shubham sinha
Automatic Power Factor Correction Using Arduino Uno
Automatic Power Factor Correction Using Arduino Uno
CMOS Analog IC design by Dr GS Javed - Refresher Course - Batch 1
CMOS Analog IC design by Dr GS Javed - Refresher Course - Batch 1
High_Voltage_RF_LDMOS_Technology_for_Broadcast_Applications_pub
High_Voltage_RF_LDMOS_Technology_for_Broadcast_Applications_pub
More from Elaf A.Saeed
IOT NodeMCU - NodeMCU Webserver
IOT NodeMCU - NodeMCU Webserver
--------------------------------------------------------------------
Email: elafe1888@gmail.com
linkden: www.linkedin.com/in/elaf-a-saeed-97bbb6150
facebook: https://www.facebook.com/profile.php?id=100004305557442
twitter: https://twitter.com/ElafASaeed1
github: https://github.com/ElafAhmedSaeed
youtube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg
slideshare: https://www.slideshare.net/ElafASaeed
Slideplayer: https://slideplayer.com/search/?q=Elaf+A.Saeed
Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gmla=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09
IOT NodeMCU - Ubidots Platform to Turn on LEDs
IOT NodeMCU - Ubidots Platform to Turn on LEDs
------------------------------------------------------------------------------
Email: elafe1888@gmail.com
linkden: www.linkedin.com/in/elaf-a-saeed-97bbb6150
facebook: https://www.facebook.com/profile.php?id=100004305557442
twitter: https://twitter.com/ElafASaeed1
github: https://github.com/ElafAhmedSaeed
youtube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg
slideshare: https://www.slideshare.net/ElafASaeed
Slideplayer: https://slideplayer.com/search/?q=Elaf+A.Saeed
Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gmla=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09
IOT NodeMCU - Thinger Platform to Turn on LEDs
IOT NodeMCU - Thinger Platform to Turn on LEDs
--------------------------------------------------------------------------
Email: elafe1888@gmail.com
linkden: www.linkedin.com/in/elaf-a-saeed-97bbb6150
facebook: https://www.facebook.com/profile.php?id=100004305557442
twitter: https://twitter.com/ElafASaeed1
github: https://github.com/ElafAhmedSaeed
youtube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg
slideshare: https://www.slideshare.net/ElafASaeed
Slideplayer: https://slideplayer.com/search/?q=Elaf+A.Saeed
Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gmla=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09
IOT NodeMCU - IFTTT Templet to send SMS
IOT NodeMCU - IFTTT Templet to send SMS
--------------------------------------------------------
Email: elafe1888@gmail.com
linkeden: www.linkedin.com/in/elaf-a-saeed-97bbb6150
Facebook: https://www.facebook.com/profile.php?id=100004305557442
twitter: https://twitter.com/ElafASaeed1
GitHub: https://github.com/ElafAhmedSaeed
YouTube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg
SlideShare: https://www.slideshare.net/ElafASaeed
Slide player: https://slideplayer.com/search/?q=Elaf+A.Saeed
Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gmla=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09
Getting date and time from ntp server with esp8266 node mcu
Getting Date & Time From NTP Server With ESP8266 NodeMCU
-----------------------------------------------------------------------------------
Email: elafe1888@gmail.com
linkden: www.linkedin.com/in/elaf-a-saeed-97bbb6150
facebook: https://www.facebook.com/profile.php?id=100004305557442
twitter: https://twitter.com/ElafASaeed1
github: https://github.com/ElafAhmedSaeed
youtube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg
slideshare: https://www.slideshare.net/ElafASaeed
Slideplayer: https://slideplayer.com/search/?q=Elaf+A.Saeed
Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gmla=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09
ESP8266 NodeMCU Server, Client, Station Mode, and Client Control LED
ESP8266 NodeMCU Server, Client, Station Mode, and Client Control LED
-------------------------------------------------------------------------
Email: elafe1888@gmail.com
linkden: www.linkedin.com/in/elaf-a-saeed-97bbb6150
facebook: https://www.facebook.com/profile.php?id=100004305557442
twitter: https://twitter.com/ElafASaeed1
github: https://github.com/ElafAhmedSaeed
youtube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg
slideshare: https://www.slideshare.net/ElafASaeed
Slideplayer: https://slideplayer.com/search/?q=Elaf+A.Saeed
Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gmla=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09
IOT NodeMCU - NodeMCU Connection to Internet
IOT NodeMCU - NodeMCU Connection to Internet
---------------------------------------------------------------------------
Email: elafe1888@gmail.com
linkden: www.linkedin.com/in/elaf-a-saeed-97bbb6150
facebook: https://www.facebook.com/profile.php?id=100004305557442
twitter: https://twitter.com/ElafASaeed1
github: https://github.com/ElafAhmedSaeed
youtube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg
slideshare: https://www.slideshare.net/ElafASaeed
Slideplayer: https://slideplayer.com/search/?q=Elaf+A.Saeed
Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gmla=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09
Lesson 9- NodeMCU with Arduino UNO (UART)
Lesson 9- NodeMCU with Arduino UNO (UART)
Course Contents:
1- What is NodeMCU.
2- NodeMCU Instillation in Arduino IDE.
3- Simple Projects with NodeMCU (Sensors & Actuators)
4- NodeMCU with Communication protocols.
5- Connection NodeMCU with Wi-Fi.
6- Use NodeMCU as Clients & Server.
7- Different Platform uses with IOT application.
Lesson 8- NodeMCU with Servo Motor
Lesson 8- NodeMCU with Servo Motor
كورس تعلم شريحة NodeMCU وكيفيه استخدامها مع الحساسات.
Course Contents:
1- What is NodeMCU.
2- NodeMCU Instillation in Arduino IDE.
3- Simple Projects with NodeMCU (Sensors & Actuators)
4- NodeMCU with Communication protocols.
5- Connection NodeMCU with Wi-Fi.
6- Use NodeMCU as Clients & Server.
7- Different Platform uses with IOT application.
lesson1 - Getting Started with ESP8266
lesson1 - Getting Started with ESP8266
1- What is NodeMCU.
2- NodeMCU Instillation in Arduino IDE.
3- Simple Projects with NodeMCU (Sensors & Actuators)
4- NodeMCU with Communication protocols.
5- Connection NodeMCU with Wi-Fi.
6- Use NodeMCU as Clients & Server.
7- Different Platform uses with IOT application.
Embedded system course projects - Arduino Course
• Arduino IDE.
• P1-Arduino with led.
• P2-Arduino with push button.
• P3-Arduino with potentiometer.
• P4-Arduino with PWM.
• P5-Arduino with LCD.
• P6-Arduino with PIR.
• P7-Arduino with DHT11
• P8-Arduino with LM35.
• P9-Arduino with gas sensor.
• P10-Arduino with dc motor.
• P11-Arduino with Servo Motor.
• P12-Arduino with Bluetooth.
• P13-Arduino with ultrasonic.
• P14-Arduino with IR sensor.
--------------------------------------------------------
Email: elafe1888@gmail.com
linkden: www.linkedin.com/in/elaf-a-saeed-97bbb6150
facebook: https://www.facebook.com/profile.php?id=100004305557442
github: https://github.com/ElafAhmedSaeed
youtube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg
slideshare: https://www.slideshare.net/ElafASaeed
Slideplayer: https://slideplayer.com/search/?q=Elaf+A.Saeed
Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gmla=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09
Embedded system introduction - Arduino Course
This is contain the following:
Embedded Systems.
• Microcontroller.
• Microprocessor vs. Microcontroller.
• Arduino.
• Digital vs Analog Signal.
• I/O Arduino Uno pins.
• Arduino IDE.
• Simulations Programs.
Email: elafe1888@gmail.com
linkden: www.linkedin.com/in/elaf-a-saeed-97bbb6150
facebook: https://www.facebook.com/profile.php?id=100004305557442
github: https://github.com/ElafAhmedSaeed
youtube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg
slideshare: https://www.slideshare.net/ElafASaeed
Slideplayer: https://slideplayer.com/search/?q=Elaf+A.Saeed
Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gmla=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09
Pyton with rasperry pi
programming languages
The programming languages supported by Raspberry Pi are all the languages supported by Linux, such as Python, Pascal, Java, and many other languages. We will use the python language in this course to program the GPIO control ports for the features that are available in this language over other languages which we will list when introducing Python language.
Summary of MATLAB Functions-Part1
Summary of the collection Function that is used in MATLAB.
What we learn:
1- Basic Math Operations.
2- Relational Operations.
3- Logical Operations.
4- General Operations.
5- Basics Mathematics Functions.
a- Addition.
b- Subtract.
c- Multiplications.
d- Divisions.
f- Power.
g- Transpose.
h- Rounding.
i- sine.
j- cosine.
k- Tangent.
l- Cosecant.
m- Secant.
n- Cotangent.
o- Complex Number.
p- Matrix Manipulation Functions.
MATLAB Basics-Part1
Matlab is basically a high level language which has many specialized toolboxes for making things easier for us.
Matlab stands for MATrix LABoratory.
The first version of MATLAB was produced in the mid 1970s as a teaching tool. MATLAB started as an interactive program for doing matrix calculations.
MATLAB has now grown to a high level mathematical language that can solve integrals and differential equations numerically and plot a wide variety of two and three Dimensional graphs.
The expanded MATLAB is now used for calculations and simulation in companies and government labs ranging from aerospace, car design, signal analysis through to instrument control and financial analysis.
In practice, it provides a very nice tool to implement numerical method.
- The desktop includes these panels:
Current Folder — Access your files.
Command Window — Enter commands at the command line, indicated by the prompt (>>).
Workspace — Explore data that you create or import from files.
- what we learn:
1- Introduction to Matlab.
2- MATLAB Installation Version 2018.
3- Assignment.
4- Operations in MATLAB.
5- Vectors and Matrices in MATLAB.
Python basics_ part1
Python is a popular programming language. It was created by Guido van Rossum, and released in 1991.
It is used for:
- web development (server-side),
- software development,
- mathematics,
- system scripting.
What can Python do?
Python can be used on a server to create web applications.
Python can be used alongside software to create workflows.
Python can connect to database systems. It can also read and modify files.
Python can be used to handle big data and perform complex mathematics.
Python can be used for rapid prototyping, or for production-ready software development.
- Why Python?
Python works on different platforms (Windows, Mac, Linux, Raspberry Pi, etc).
Python has a simple syntax similar to the English language.
Python has syntax that allows developers to write programs with fewer lines than some other programming languages.
Python runs on an interpreter system, meaning that code can be executed as soon as it is written. This means that prototyping can be very quick.
Python can be treated in a procedural way, an object-oriented way or a functional way.
- what we learn:
1- Python Install.
2- Python Comments.
3- Python Variables.
4- Python Data Types.
5- Python Numbers.
How to be Healthy
Why this book?
This book is about the significance of solid food in our every day schedule. It is extremely important to have solid food in order to keep up the inward endurance and remain sound.
Extraordinary significance has been joined to wellbeing. A few people attempt to pick up wellbeing through engineered items. All things considered food is the most ideal alternative. Sound food can furnish us with a solid life. Here I might want to give you a few hints that bit by bit improve your body quality and keep up your wellbeing.
Introduction
Nearly everybody wishes to remain sound and live solid. Anyway, carrying on with a sound life requires significant exertion on your part. You should consume less calories, you should exercise, and you should pay special mind to yourself so as to be sound.
The most ideal approach to keep you solid is to be glad, practice acceptable propensities, and keep up a sound customary daily schedule and a sound method of thought. Peruse some helpful hints on solid propensities to make you fit and sound.
Carrying on with a sound way of life is turning out to be genuinely fit and watching appropriate eating routine. We can't in any way, shape or form become sound just by eating well food alone. Then again, one can't likewise guarantee carrying on with a sound way of life assuming nearly nothing or basically no time at all is spent on some physical exercises. A sound way of life, hence, is a decent parity of both.
Lecture 6(simulation programs- برامج المحاكاة)
في هذه المحاضرة سيتم شرح البرامج التي تساعد بناء الانظمة المدمجة وعمل محاكاة لها لكي يتم فحصها قبل بناء الجزء الحقيقي الظاهر والذي يراد اظهارة
Lecture 5(the steps of design embedded systems- خطوات تصميمي الانظمة المدمجة)
هذه المحاضرة تم شرح فيها خطوات تصميم الانظمة المدمجة التي يتم اتباعها بواسطة اي مصصم يريد ان يبني نظامة او مشروعة الخاص
Lecture 4(output devices- اجهزة الخراج)
تتضمن هذه المحاضرة
1- ماهي اجهزة الاخراج
2- امثلة عن المشغلات مع الميكروكونترولر
3- الماتور Motor
4- شاشات العرض Display Monitors
5- الضوء Led
More from Elaf A.Saeed (20)
Getting date and time from ntp server with esp8266 node mcu
Getting date and time from ntp server with esp8266 node mcu
ESP8266 NodeMCU Server, Client, Station Mode, and Client Control LED
ESP8266 NodeMCU Server, Client, Station Mode, and Client Control LED
Lecture 5(the steps of design embedded systems- خطوات تصميمي الانظمة المدمجة)
Lecture 5(the steps of design embedded systems- خطوات تصميمي الانظمة المدمجة)
Recently uploaded
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Free A4 downloadable and printable Cyber Security, Social Engineering Safety and security Training Posters . Promote security awareness in the home or workplace. Lock them Out From training providers datahops.com
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
A Comprehensive Guide to DeFi Development Services in 2024
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Recently uploaded (20)
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
A Comprehensive Guide to DeFi Development Services in 2024
A Comprehensive Guide to DeFi Development Services in 2024
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Lesson 6 - NodeMCU with PWM Pin
- 1. NodeMCU Course NodeMCU with PWM
- 2. NodeMCU with PWM (Pulse-Width Modulation) Eng. Elaf A.Saeed • The ESP8266 GPIOs can be set either to output 0V or 3.3V, but they can’t output any voltages in between. However, you can output “fake” mid-level voltages using pulse-width modulation (PWM), which is how you’ll produce varying levels of LED brightness for this project.
- 3. NodeMCU with PWM (Pulse-Width Modulation) Eng. Elaf A.Saeed • The duty cycle is the fraction of time period at which LED is set to HIGH.
- 4. NodeMCU with PWM (Pulse-Width Modulation) Eng. Elaf A.Saeed
- 5. Components Eng. Elaf A.Saeed • NodeMCU • Cable • Led • 220 ohm
- 8. Thank you
- 9. Email: elafe1888@gmail.com linkden: www.linkedin.com/in/elaf-a-saeed-97bbb6150 facebook: https://www.facebook.com/profile.php?id=100004305557442 github: https://github.com/ElafAhmedSaeed youtube: https://youtube.com/channel/UCE_RiXkyqREUdLAiZcbBqSg slideshare: https://www.slideshare.net/ElafASaeed Slideplayer: https://slideplayer.com/search/?q=Elaf+A.Saeed Google Scholar: https://scholar.google.com/citations?user=VIpVZKkAAAAJ&hl=ar&gm la=AJsN-F7PIgAjWJ44Hzb18fwPqJaaUmG0XzbLdzx09