Kurita Europe supplies products and services to all EMEA states (Europe, Middle East and Africa). We optimise the reliability & efficiency of industrial plants and projects. Our solutions for industrial water, paper & process treatment improve plant lifetime as well as reducing costly downtimes.
Here, You can see a clear view on how various activated carbons are produced and their manufacturing techiques along with their properties and testing procedures.
Use and Applications of Membranes
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 GENERAL
4.1 What is a Membrane Process?
4.2 What does a Membrane look like?
4.3 Why use Membranes?
4.4 Membrane Types and Polymers Used
5 REVERSE OSMOSIS
5.1 Principles of Reverse Osmosis
5.2 Limitations
5.3 Performance
5.4 Costs
5.5 Worked Example
5.6 Applications
6 MICROFILTRATION AND ULTRAFILTRATION
6.1 Microfiltration
6.2 Ultrafiltration
7 PERVAPORATION
7.1 Classes of Application
7.2 Characteristics
7.3 Costs
7.4 Example - Lurgi Design
7.5 Application - Stripping Organics from Water
8 GAS SEPARATION AND VAPOR PERMEATION
8.1 Gas Separation
8.2 Vapor Permeation
9 LESS COMMON MEMBRANE PROCESSES
9.1 Dialysis
9.2 Electrodialysis
9.3 Electrolysis
9.4 Salt Splitting
10 BIBLIOGRAPHY
TABLES
1 UTILITY CONSUMPTION AND COST COMPARISON
Plastic and Tire Pyrolysis Plant Manufacturers - Pyrocrat Systems LLPPyrolysis Plant
Pyrolysis plant is an industry that converts waste plastic & tires into Pyrolysis Oil, Carbon Black & Hydrocarbon Gas. End products are used as industrial fuels for producing heat, steam or electricity. Pyrolysis plant is also known as: pyrolysis unit, plastic to fuel industry, tire to fuel industry, plastic and tire recycling unit etc.
More info at http://www.pyrolysisplant.com/
Electro-oxidation And Its Feasibility In Wastewater TreatmentSakib Shahriar
Electro-oxidation (EO) is one of the advanced oxidation processes (AOP) used in wastewater treatment. It is also called anodic oxidation. In this presentation, we can learn about the working principle, industrial applications, types of electrodes, and catalysts in the EO process. The advantages and disadvantages are described later. The main advantages of electro-oxidation are the formation of low sludge and large percentages of organic matter degradation. But the main drawbacks occur due to the requirement of large space and expense. EO is used in many types of wastewater treatment. Degradation of methyl orange azo dye in a recirculation flow plant system, treatment of wastewater containing aromatic amines, endocrine disruptors treatment, domestic water, industrial wastewater, synthetic dye effluent, olive mill wastewater, pulp mill wastewater, citric acid wastewater.
Here, You can see a clear view on how various activated carbons are produced and their manufacturing techiques along with their properties and testing procedures.
Use and Applications of Membranes
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 GENERAL
4.1 What is a Membrane Process?
4.2 What does a Membrane look like?
4.3 Why use Membranes?
4.4 Membrane Types and Polymers Used
5 REVERSE OSMOSIS
5.1 Principles of Reverse Osmosis
5.2 Limitations
5.3 Performance
5.4 Costs
5.5 Worked Example
5.6 Applications
6 MICROFILTRATION AND ULTRAFILTRATION
6.1 Microfiltration
6.2 Ultrafiltration
7 PERVAPORATION
7.1 Classes of Application
7.2 Characteristics
7.3 Costs
7.4 Example - Lurgi Design
7.5 Application - Stripping Organics from Water
8 GAS SEPARATION AND VAPOR PERMEATION
8.1 Gas Separation
8.2 Vapor Permeation
9 LESS COMMON MEMBRANE PROCESSES
9.1 Dialysis
9.2 Electrodialysis
9.3 Electrolysis
9.4 Salt Splitting
10 BIBLIOGRAPHY
TABLES
1 UTILITY CONSUMPTION AND COST COMPARISON
Plastic and Tire Pyrolysis Plant Manufacturers - Pyrocrat Systems LLPPyrolysis Plant
Pyrolysis plant is an industry that converts waste plastic & tires into Pyrolysis Oil, Carbon Black & Hydrocarbon Gas. End products are used as industrial fuels for producing heat, steam or electricity. Pyrolysis plant is also known as: pyrolysis unit, plastic to fuel industry, tire to fuel industry, plastic and tire recycling unit etc.
More info at http://www.pyrolysisplant.com/
Electro-oxidation And Its Feasibility In Wastewater TreatmentSakib Shahriar
Electro-oxidation (EO) is one of the advanced oxidation processes (AOP) used in wastewater treatment. It is also called anodic oxidation. In this presentation, we can learn about the working principle, industrial applications, types of electrodes, and catalysts in the EO process. The advantages and disadvantages are described later. The main advantages of electro-oxidation are the formation of low sludge and large percentages of organic matter degradation. But the main drawbacks occur due to the requirement of large space and expense. EO is used in many types of wastewater treatment. Degradation of methyl orange azo dye in a recirculation flow plant system, treatment of wastewater containing aromatic amines, endocrine disruptors treatment, domestic water, industrial wastewater, synthetic dye effluent, olive mill wastewater, pulp mill wastewater, citric acid wastewater.
Resin Epoxy Adhesive and Hardener Manufacturing IndustryAjjay Kumar Gupta
Resin Epoxy Adhesive and Hardener Manufacturing Industry. Two-Part Epoxy Adhesives. Adhesive Based on Epoxy Resin (Two Part)
Epoxy adhesives are high strength adhesives used extensively across various industries. They are made of epoxy resins, which are in turn made up of the chemical Bisphenol A. Epoxy adhesives can be used for adhesion of numerous substrates such as wood, metals, plastics, glass and stones. After application, epoxy adhesives require time for curing or setting. This can be done with the help of heat or by exposure to ultra violet light or at room temperature.
The epoxy adhesives cured by exposure to ultra violet light are used to manufacture fiber optics and opto electronics. Epoxy adhesives have strong adhesion which makes them the most commonly used structural adhesives.
See more
https://goo.gl/SZw231
https://goo.gl/4uvb8e
https://goo.gl/dq6Jrj
Contact us:
Niir Project Consultancy Services
An ISO 9001:2015 Company
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
#Epoxy_Adhesive_Formulations, #Epoxy_Adhesive, Epoxy Adhesive Formulations Business, #Epoxy_Adhesive_Formulations_for_Manufacturing, #Epoxy_Adhesive_and_Epoxy_Glue, Manufacture of Adhesives, Industrial Adhesive Manufacturing, #Epoxy_Adhesives_Production, Preparation of Epoxy Adhesive, Epoxy Adhesive Manufacturing, Epoxy Resin Adhesives, Epoxy Resin Adhesives, Manufacture of Adhesives, Epoxy Adhesives Manufacture, #Epoxy_Adhesive_Manufacture_in_India, Epoxy Adhesive Uses, #Epoxy_Adhesive_Industry, Epoxy Resin-Based Adhesives, Adhesive Based on Epoxy Resin, Epoxy Adhesive Composition, Epoxy Resin-Based Adhesives, Epoxy Resin Adhesive, Epoxy Based Adhesive, #Project_Report_on_Epoxy_Adhesive_Manufacturing_Industry, Detailed Project Report on Epoxy Adhesive Manufacturing, Project Report on Epoxy Adhesives Production, Pre-Investment Feasibility Study on Epoxy Adhesives Production, Techno-Economic feasibility study on Epoxy Adhesives Production, #Feasibility_report_on_Epoxy_Adhesives_Production, Free Project Profile on Epoxy Adhesive Industry, #Project_profile_on_Epoxy_Adhesive_Industry, Download free project profile on Epoxy Adhesive Formulations, Two-Part Epoxy Adhesives Araldite type, Araldite type Standard Resin Epoxy Adhesive & Hardener, Araldite type Standard Epoxy Adhesive, Acratite type Epoxy Resin-Hardener - Strong Adhesive, Epoxy & Accessories - Glues & Epoxy, Epoxy Resin and Hardener Araldite Type
Zero liquid discharge (ZLD) is a wastewater management technique that eliminates liquid waste discharge going outside of operating plants. This has attracted renewed interest worldwide in recent years.
Paper production (non-conventional sources) Aman Kapoor
As paper production from wood pulp is leading to huge environment imbalance therefore we should shift to some non conventional methods of paper production.
HDPE and uPVC Pipes Production. Business Opportunities in Pipe Manufacturing Industry
HDPE Pipe
HDPE pipe is a pipe made from high-density polyethylene. Known for its large strength to density ratio, it can carry potable water, wastewater, slurries, chemicals, hazardous wastes, and compressed gases.
HDPE ducts or HDPE pipes are specially manufactured electrical conduits made from graded raw materials like PE 63, PE 80 and PE 100.
Major Applications of HDPE Pipes are:
1. Agriculture
Flow line irrigation; lift irrigation, suction/delivery of pumps, siphons, tube-well pipes, water supplies, pesticide spraying system, and drip irrigation
Advantages - Life of pipe up to 50 years, Corrosion resistance, much lighter than metal pipes making transportation and assembling easier
See more
https://goo.gl/83dt2x
https://goo.gl/6Myatr
Contact us:
Niir Project Consultancy Services
An ISO 9001:2015 Company
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
#How¬_to_Start_HDPE_Pipes_Manufacturing_Industry, #Manufacturing_Process_for_HDPE_Pipe, #uPVC_Pipe_Production_Plant, #HDPE_Pipe_Manufacturing, #HDPE_Pipe_Manufacturing_Process_Flow_Chart, #HDPE_Pipe_Manufacturing_Process_PPT, #uPVC_Pipe_Manufacturing_Unit, #Project_Report_on_HDPE_Pipes_Manufacturing, #Unplasticized_Polyvinyl_Chloride_Pipes, #HDPE_Pipe_Plant_Cost, #HDPE_Pipe_Project_Report_Pdf, #HDPE_Pipe_Production, HDPE Pipes Manufacturing Industry, Production Process of HDPE Pipes, Pipe Manufacture, High-Density Polyethylene (HDPE) or Polyethylene High-Density (PEHD) Pipe, Production of HDPE Pipe, HDPE Pipe Plant, HDPE Pipe Making Business, HDPE Pipe Manufacturing Process, HDPE Pipe Production and Manufacturing, HDPE Production and Processing Plant, Un-Plasticized Polyvinyl Chloride (UPVC) Pipe Production, UPVC Pipe Production, uPVC Pipe Manufacturing, UPVC Pipes Factory, UPVC Pipes, PVC Pipe Manufacturing Process Flow Chart, PVC Pipe Manufacturing Process Pdf, PVC Pipe Manufacturing Process Flow Chart Pdf, uPVC Pipe Manufacturing Process PPT, PVC Pipe Manufacturing Cost, PVC Pipe Manufacturing Plant Layout, PVC Pipe Manufacturing Process, How to Start PVC Pipe Manufacturing Business, I Want to Start a Small Setup of PVC Pipe Industry, Start a PVC Pipe Manufacturing Plant, #UPVC_Pipes_Manufacturing_Project, Project Report on HDPE Pipes Manufacturing Industry, Detailed Project Report on HDPE Pipes Manufacturing, #Project_Report_on_UPVC_Pipe_Production, Pre-Investment Feasibility Study on UPVC Pipe Production, Techno-Economic feasibility study on UPVC Pipe Production, #Feasibility_report_on_HDPE_Pipe_Production, Free Project Profile on UPVC Pipe Production, Project profile on HDPE Pipe Production, Download free project profile on HDPE Pipes Manufacturing
Cutting Cost of CO2 Capture in Process Industry (CO2stCap) Project overview &...Global CCS Institute
The CO2StCap project is a four year initiative carried out by industry and academic partners with the aim of reducing capture costs from CO2 intensive industries (more info here). The project, led by Tel-Tek, is based on the idea that cost reduction is possible by capturing only a share of the CO2emissions from a given facility, instead of striving for maximized capture rates. This can be done in multiple ways, for instance by capturing only from the largest CO2 sources at individual multi-stack sites utilising cheap waste heat or adapting the capture volumes to seasonal changes in operations.
The main focus of this research is to perform techno-economic analyses for multiple partial CO2 capture concepts in order to identify economic optimums between cost and volumes captured. In total for four different case studies are developed for cement, iron & steel, pulp & paper and ferroalloys industries.
The first part of the webinar gave an overview of the project with insights into the cost estimation method used. The second part presented the iron & steel industry case study based on the Lulea site in Sweden, for which waste-heat mapping methodology has been used to assess the potential for partial capture via MEA-absorption. Capture costs for different CO2 sources were compared and discussed, demonstrating the viability of partial capture in an integrated steelworks.
Webinar presenters included Ragnhild Skagestad, senior researcher at Tel-Tek; Maximilian Biermann, PhD student at Division of Energy Technology, Chalmers University of Technology and Maria Sundqvist, research engineer at the department of process integration at Swerea MEFOS.
Pulp and Paper Manufacturing and Treatment Of Waste Water
is About:
What is Fiber?
Lignin?Hemicellouse?
Real Explanation of Photosynthesis?
SEM (Scanning Electronic Microscope) Pictures of Trees
Can Plants Survive in Green Light?
How the Pulp is Produced from The Trees (Video) ?
Can We Use Other Than Trees for Pulp Preparation?
Some Information about Locally Located oldest Paper Mills
How the Waste Water Treated from Industries?
DEGRÉMONT INDUSTRY CORPORATE BROCHURE 2013Rick Nabett
Degrémont Industry is purely devoted to industry’s needs. It combines the activities of Ondeo IS in Europe as well as all of Degrémont’s industrial activities worldwide. Degrémont Industry is a global player in the optimum and comprehensive management of the industrial water cycle.
http://www.degremont.com.au/
Resin Epoxy Adhesive and Hardener Manufacturing IndustryAjjay Kumar Gupta
Resin Epoxy Adhesive and Hardener Manufacturing Industry. Two-Part Epoxy Adhesives. Adhesive Based on Epoxy Resin (Two Part)
Epoxy adhesives are high strength adhesives used extensively across various industries. They are made of epoxy resins, which are in turn made up of the chemical Bisphenol A. Epoxy adhesives can be used for adhesion of numerous substrates such as wood, metals, plastics, glass and stones. After application, epoxy adhesives require time for curing or setting. This can be done with the help of heat or by exposure to ultra violet light or at room temperature.
The epoxy adhesives cured by exposure to ultra violet light are used to manufacture fiber optics and opto electronics. Epoxy adhesives have strong adhesion which makes them the most commonly used structural adhesives.
See more
https://goo.gl/SZw231
https://goo.gl/4uvb8e
https://goo.gl/dq6Jrj
Contact us:
Niir Project Consultancy Services
An ISO 9001:2015 Company
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
#Epoxy_Adhesive_Formulations, #Epoxy_Adhesive, Epoxy Adhesive Formulations Business, #Epoxy_Adhesive_Formulations_for_Manufacturing, #Epoxy_Adhesive_and_Epoxy_Glue, Manufacture of Adhesives, Industrial Adhesive Manufacturing, #Epoxy_Adhesives_Production, Preparation of Epoxy Adhesive, Epoxy Adhesive Manufacturing, Epoxy Resin Adhesives, Epoxy Resin Adhesives, Manufacture of Adhesives, Epoxy Adhesives Manufacture, #Epoxy_Adhesive_Manufacture_in_India, Epoxy Adhesive Uses, #Epoxy_Adhesive_Industry, Epoxy Resin-Based Adhesives, Adhesive Based on Epoxy Resin, Epoxy Adhesive Composition, Epoxy Resin-Based Adhesives, Epoxy Resin Adhesive, Epoxy Based Adhesive, #Project_Report_on_Epoxy_Adhesive_Manufacturing_Industry, Detailed Project Report on Epoxy Adhesive Manufacturing, Project Report on Epoxy Adhesives Production, Pre-Investment Feasibility Study on Epoxy Adhesives Production, Techno-Economic feasibility study on Epoxy Adhesives Production, #Feasibility_report_on_Epoxy_Adhesives_Production, Free Project Profile on Epoxy Adhesive Industry, #Project_profile_on_Epoxy_Adhesive_Industry, Download free project profile on Epoxy Adhesive Formulations, Two-Part Epoxy Adhesives Araldite type, Araldite type Standard Resin Epoxy Adhesive & Hardener, Araldite type Standard Epoxy Adhesive, Acratite type Epoxy Resin-Hardener - Strong Adhesive, Epoxy & Accessories - Glues & Epoxy, Epoxy Resin and Hardener Araldite Type
Zero liquid discharge (ZLD) is a wastewater management technique that eliminates liquid waste discharge going outside of operating plants. This has attracted renewed interest worldwide in recent years.
Paper production (non-conventional sources) Aman Kapoor
As paper production from wood pulp is leading to huge environment imbalance therefore we should shift to some non conventional methods of paper production.
HDPE and uPVC Pipes Production. Business Opportunities in Pipe Manufacturing Industry
HDPE Pipe
HDPE pipe is a pipe made from high-density polyethylene. Known for its large strength to density ratio, it can carry potable water, wastewater, slurries, chemicals, hazardous wastes, and compressed gases.
HDPE ducts or HDPE pipes are specially manufactured electrical conduits made from graded raw materials like PE 63, PE 80 and PE 100.
Major Applications of HDPE Pipes are:
1. Agriculture
Flow line irrigation; lift irrigation, suction/delivery of pumps, siphons, tube-well pipes, water supplies, pesticide spraying system, and drip irrigation
Advantages - Life of pipe up to 50 years, Corrosion resistance, much lighter than metal pipes making transportation and assembling easier
See more
https://goo.gl/83dt2x
https://goo.gl/6Myatr
Contact us:
Niir Project Consultancy Services
An ISO 9001:2015 Company
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
#How¬_to_Start_HDPE_Pipes_Manufacturing_Industry, #Manufacturing_Process_for_HDPE_Pipe, #uPVC_Pipe_Production_Plant, #HDPE_Pipe_Manufacturing, #HDPE_Pipe_Manufacturing_Process_Flow_Chart, #HDPE_Pipe_Manufacturing_Process_PPT, #uPVC_Pipe_Manufacturing_Unit, #Project_Report_on_HDPE_Pipes_Manufacturing, #Unplasticized_Polyvinyl_Chloride_Pipes, #HDPE_Pipe_Plant_Cost, #HDPE_Pipe_Project_Report_Pdf, #HDPE_Pipe_Production, HDPE Pipes Manufacturing Industry, Production Process of HDPE Pipes, Pipe Manufacture, High-Density Polyethylene (HDPE) or Polyethylene High-Density (PEHD) Pipe, Production of HDPE Pipe, HDPE Pipe Plant, HDPE Pipe Making Business, HDPE Pipe Manufacturing Process, HDPE Pipe Production and Manufacturing, HDPE Production and Processing Plant, Un-Plasticized Polyvinyl Chloride (UPVC) Pipe Production, UPVC Pipe Production, uPVC Pipe Manufacturing, UPVC Pipes Factory, UPVC Pipes, PVC Pipe Manufacturing Process Flow Chart, PVC Pipe Manufacturing Process Pdf, PVC Pipe Manufacturing Process Flow Chart Pdf, uPVC Pipe Manufacturing Process PPT, PVC Pipe Manufacturing Cost, PVC Pipe Manufacturing Plant Layout, PVC Pipe Manufacturing Process, How to Start PVC Pipe Manufacturing Business, I Want to Start a Small Setup of PVC Pipe Industry, Start a PVC Pipe Manufacturing Plant, #UPVC_Pipes_Manufacturing_Project, Project Report on HDPE Pipes Manufacturing Industry, Detailed Project Report on HDPE Pipes Manufacturing, #Project_Report_on_UPVC_Pipe_Production, Pre-Investment Feasibility Study on UPVC Pipe Production, Techno-Economic feasibility study on UPVC Pipe Production, #Feasibility_report_on_HDPE_Pipe_Production, Free Project Profile on UPVC Pipe Production, Project profile on HDPE Pipe Production, Download free project profile on HDPE Pipes Manufacturing
Cutting Cost of CO2 Capture in Process Industry (CO2stCap) Project overview &...Global CCS Institute
The CO2StCap project is a four year initiative carried out by industry and academic partners with the aim of reducing capture costs from CO2 intensive industries (more info here). The project, led by Tel-Tek, is based on the idea that cost reduction is possible by capturing only a share of the CO2emissions from a given facility, instead of striving for maximized capture rates. This can be done in multiple ways, for instance by capturing only from the largest CO2 sources at individual multi-stack sites utilising cheap waste heat or adapting the capture volumes to seasonal changes in operations.
The main focus of this research is to perform techno-economic analyses for multiple partial CO2 capture concepts in order to identify economic optimums between cost and volumes captured. In total for four different case studies are developed for cement, iron & steel, pulp & paper and ferroalloys industries.
The first part of the webinar gave an overview of the project with insights into the cost estimation method used. The second part presented the iron & steel industry case study based on the Lulea site in Sweden, for which waste-heat mapping methodology has been used to assess the potential for partial capture via MEA-absorption. Capture costs for different CO2 sources were compared and discussed, demonstrating the viability of partial capture in an integrated steelworks.
Webinar presenters included Ragnhild Skagestad, senior researcher at Tel-Tek; Maximilian Biermann, PhD student at Division of Energy Technology, Chalmers University of Technology and Maria Sundqvist, research engineer at the department of process integration at Swerea MEFOS.
Pulp and Paper Manufacturing and Treatment Of Waste Water
is About:
What is Fiber?
Lignin?Hemicellouse?
Real Explanation of Photosynthesis?
SEM (Scanning Electronic Microscope) Pictures of Trees
Can Plants Survive in Green Light?
How the Pulp is Produced from The Trees (Video) ?
Can We Use Other Than Trees for Pulp Preparation?
Some Information about Locally Located oldest Paper Mills
How the Waste Water Treated from Industries?
DEGRÉMONT INDUSTRY CORPORATE BROCHURE 2013Rick Nabett
Degrémont Industry is purely devoted to industry’s needs. It combines the activities of Ondeo IS in Europe as well as all of Degrémont’s industrial activities worldwide. Degrémont Industry is a global player in the optimum and comprehensive management of the industrial water cycle.
http://www.degremont.com.au/
Degrémont Australia works with food and beverage clients to identify safe, reliable and well-priced solutions to keep water consumption under control.
http://www.degremont.com.au/
The water used in cooling systems, boilers, products and production represents the largest water-related expenditure at an industrial site. In addition, the quality and quantity requirements vary from one industry to another and from one site to another. Given the importance of process water for our industrial customers, we have made it a priority to offer them reliable and innovative solutions to meet their water needs and ensure continuity of industrial production. http://www.degremont.com.au/industrial/solutions/process-water/
Irrespective of the type of water required (ingredient or washing water, water for steam production, water for cooling systems etc); Degrémont Australia offers a complete solution to meet customers’ needs.
http://www.degremont.com.au/
Your partner in sustainable, efficient and cost-effective water management for industry.
Find out more: http://www.degremont-industry.com/en/
Come discover our video and meet Alex, a passionate associate at Degremont Industry: http://www.youtube.com/watch?v=zXhL-mfZcNo&list=UUYAIpx1_5Q7RyH824WBg9nA&feature=share&index=3
Manufacturers and Suppliers of water, effluent and seawater de-salination treatment plants. Along with this, we also offer consultancy services for commissioning of plants such as Reverse Osmosis Plants, Sea Water De-Salination Plants, Mineral Water Projects, Iron Removal Filters, Packaged Sewage Treatment Plants, Effluent Treatment Plants, Effluent Recycling Plants, CATS Range Of Cooling Water Treatment Chemicals, CATS Range Of Broad Spectrum Biocides.
Kurita’s innovative Cetamine® Technology is designed for complete protection in boiler water treatments.
Composed of film-forming substances, Cetamine creates a hydrophobic protective film acting as a barrier between water and metal, effectively inhibiting corrosion and scaling.
Discover Cetamine® benefits and features for your boiler system.
https://www.kurita-cetamine.com/
Kurita Dropwise Technology increases water repellency and improves heat transfer coefficient remarkably contributing to a higher productivity and lower steam consumption.
Kurita Dropwise Technology for Paper Dryer SectionKurita
Kurita Dropwise-Technology provides excellent application results in the Paper Dryer Section and significantly reduces the total cost of ownership.
As a result of years of experience, Kurita developed Dropwise Technology where heat transfer improves by forming a water-repellent film on surfaces in the rotating cylinders of the dryer section.
Learn more:
https://www.kurita.eu/en/dropwise-technology
Kurita´s water reclamation system for cooling water blowdownKurita
Sustainable water resources management is one of our biggest concerns for the future. Environmental regulations are getting stronger, strive to lower our water consumption with an increasing cost of make-up water for the systems and process, and for the discharge treatments. Water reclamation is a priority of Kurita’s Corporate social responsibility for sharing value with our customers. Kurita proposes to combine all its expertise in cooling water treatments, equipment, and monitoring with remote control. Through patented technologies, Kurita’s blowdown recovery system leads to stable operation, reduction of running costs and better performance of the cooling system without investment for the user.
Environmental and economic guidelines and regulations strive to minimize the consumption of water and energy and the production of solid and liquid wastes from all kinds of industries worldwide. The automotive industry plays a particular role in this, as spray paint booth facilities are used to provide exterior and interior parts with the necessary coating. During this process there is always a certain amount of paint overspray, which is washed away and sent to a waste water facility where the paint and coating particles are separated from the wash water. The better the separation of the particles and the water the lower the waste disposal and water costs, having a positive impact on the environment and on the financial aspects for customers. Kurita’s proprietary and innovative product range Kuristuck is able to achieve excellent performance for water- and solvent born paints resulting in reduced costs and reduced environmental impact. Kurita’s worldwide and long experience has contributed significantly to the development of these innovative technologies and we continue to develop these new technologies continuously at our R&D centers in Japan and Germany.
Learn more about Kuristuck Technology – Our comprehensive product range for safe and efficient paint booth treatment: https://www.kurita.eu/en/kuristuck-technology
S.sensing MX - The new S.sensing Matrix SystemKurita
A new modular analyzer system, especially designed for cooling water applications. This modular system with its range of different controllers and analyzers allows to fit S.sensing MX to practically any application and need. At the same time it is only installed what is really needed at the customer site. The selection of analyzers are based on the real needs: There are analyzers available for Kurita product active measurement as well as for KPI measurement. Therefore S.sensing MX gives double safety - to control the treatment and the success of the water treatment! S.sensing Matrix System, Kurita’s difference in equipment!
Awarded Polymer for Steam Generators and Boiler Systems – DReeM Polymer™Kurita
DReeM Polymer™ is Kurita’s awarded Polymer Technology specifically designed for steam generators and boiler systems to avoid scale formation and to remove silica and hardness scale from system surfaces during normal operation. DReeM Polymer™ is up to 4 times more efficient than conventional polymers and reduces operational costs by increasing system efficiency and lifetime. For this outstanding properties, Kurita’s DReeM Polymer™ has been awarded at the 49th JCIA Technology Award hosted by the Japan Chemical Industry Association (JCIA) with the Environmental Technology Award as an outstanding technology with remarkable reductions in environmental impact.
Dilurit® CaR-System - Improvement in deposit controlKurita
Kurita, with a well-known experience in biofilm and deposit control in water and paper systems, approached the situation with the innovative Dilurit® CaR-System. Dilurit® CaR-System is a mild oxidizing biocide in combination with a booster agent. A broad spectrum of efficacy, a long-lasting success and a good compatibility with other paper chemicals such as dyes or optical brighteners are some of the advantages of this technology, developed and patented by Kurita.
With Dilurit® CaR-System you have the following benefits: 1)The microbiological contamination is kept under control . 2)A reduction of the conductivity in the paper machine loop will be achieved. 3)The increase of pH and ORP in the paper machine loop is an additional advantage.
Advanced technologies at paper chemicals: wet strength agents – Giluton®. For more than three decades Kurita has established a leading position in the European market for wet strength agents. Wet strength is the mechanical strength of paper remaining after complete soaking in water. Our wet strength resins, Giluton®, are based on polyamidoamine-epichlorohydrin (PAAE) chemistry and are primarily applied under neutral to slightly alkaline conditions. Our strong commitment to R&D has led to an advanced portfolio fulfilling the needs of particular applications requirements and regulatory standards. Our product range composed of 2nd and 3rd generation, meet the requirements of the recommendations No. XXXVI of BfR (Bundesinstitut für Risikoanalyse), the RAL Umweltzeichen and the EU ecolabel for paper, the Nordic Swan Ecolabelling of Tissue as well as the FDA regulations 21 CFR §§ 176.170 and 176.180 (packaging papers for dry or aqueous and fatty food).
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Affordable Stationery Printing Services in Jaipur | Navpack n PrintNavpack & Print
Looking for professional printing services in Jaipur? Navpack n Print offers high-quality and affordable stationery printing for all your business needs. Stand out with custom stationery designs and fast turnaround times. Contact us today for a quote!
Digital Transformation and IT Strategy Toolkit and TemplatesAurelien Domont, MBA
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
4. 4
Kurita Europe serves EMEA region
• 500 employees in total generated a turnover of approx. 200 Mio. US$
• 220 employees are highly qualified field representatives; 40 are
Technical and R&D
• Customised technologies for industrial water, paper and process
treatment
• Kurita Europe supplies products and services to all EMEA states
(Europe, Middle East and Africa)
• Own production facilities contributing to a reliable supply chain for our
customers
• Own R&D centers, analytical labs and pilot test plants in Germany
allowing us to develop continuously tailored state-of-the-art technologies
5. 5
Our portfolio
• Boiler water
• Cooling water
• Membrane
treatment
• Wastewater
• Cleaning
• Drinking water
• Swimming pool
water
• Dust control agents
• Cokemaking process
additives
• Fuel additives
• Fouling inhibitor
• Cleaning agents
• Combustion improver
• Emulsion breakers
• Corrosion inhibitors
• ACF technology
• Defoamers
• Fouling inhibitors
• Cleaning & degassing
• Wet strength agents
• Biocides
• Surface sizing agents
• Pitch & sticky control
• Flocculants
• Defoamers
• Retention agents
Petrochemical &
Refinery process
Industrial process
Paper processWater solutions
7. 7
Milestones of history – Kurita Europe GmbH
OUR ROOTS
The Kurita Group
founded in Japan.
ICL Group
acquires Giulini.
1949 2008
2012
2015
1977
1989
2004 2016
ICL Group acquires
Tiami.
Henkel acquires
Concorde Chimie.
ICL Group acquires
Henkel water treatment.
Kurita Europe founded
with head office in
Viersen, Germany.
Opening Of
Kurita Middle
East FZE.
The Kurita Group acquires
ICL Water, Paper & Al
Compounds.
2017
Kurita Europe acquires the
polymer production plant
from Akzo in France.
9. 9
Cooling water
Legionella Control - Audits - Risk assessments - Solutions
Biocides and disinfectants for biological control – Ferrocid® / Dilurit®
Own polymer R&D and production – Turbodispin®
Biodegradable, low-P, anti corrosion technology – Corrsave®
Traditional and film-forming treatment programs for closed cooling
and hot water systems – Korrodex® and Cetamine®
Innovative seawater macrofouling and corrosion control
On-line and off-line cleaning and passivation programs
10. 10
Drinking water
From water preparation to corrosion protection of the installations
For the protection of drinking water quality from central waterworks to
domestic installations
Legionella control for hygienically safe Drinking Water
Flexible combination of two high conc. components for optimal
and effective water treatment – Integration Method
Corrosion inhibition – Metaqua®
In compliance with - European standards for drinking water -
European DW Directive – NSF - as well as national regulations
11. 11
Wastewater
Comprehensive coagulation and flocculation agents range –
Kuriflock
Eco-friendly PAM and mineral oil free flocculants – Kuriflock
Innovative treatment concepts for build-up and optimization of
biological wastewater treatment plants – Biotreat
Online monitoring & control of wastewater treatment – S.sensing CS
Green product range from natural and renewable resources
Treatment concepts for minimal sludge generation
12. 12
Boiler water
Patented film-forming technologies – Cetamine®
Unique solutions for high pressure systems in discontinuous
operation and for wet & dry lay-up – Cetamine® G851
Patented, non-toxic alternative to hydrazine for traditional treatment
programs – Ferrolix® A6060
Treatment programs for food industry in accordance with FDA
§173.310 – Ferrolix®
Patented, catalyzed oxygen scavenger for low temperature
feedwater conditions – Ferrolix® 3200
Reliable online monitoring devices
Determination of protective Cetamine® layer on system surfaces with
Cetamine® Wipe Test Kit
Awarded hardness & silica control products – DReeM PolymerTM
13. 13
Reverse osmosis
Antiscalants, cleaners & dispersants for any kind of filtration
systems – Osmotech®
Biofouling monitoring, prevention and removal
Drinking water approvals as well as national regulations (NSF)
Specific cleaning procedures & membrane autopsies
Membrane rejuvenation concept – KuriverterTM RC
Slime control agent – KuriverterTM IK-110
14. 14
Refinery & petrochemical process
Demulsifiers improve desalter performance and oil/water separation
Fouling and corrosion control programs ensure profitability
ACF technology for ammonium salt removal and corrosion control
Cleaning & decontamination programs reduce shutdown times
15. 15
Industrial process
Dust control agents with excellent environmental profile – Ferrosolf®
Paint booth treatment – Kuristuck®
Geothermal power industry – Kuritherm®
Ferroflame® combustion improvers and corrosion inhibitors to be
used in power stations and industrial boilers
16. 16
Paper process
Biocides and disinfectants to protect your water systems from
biological contamination – Ferrocid® / Dilurit®
Sizing (wet end and surface) – Perglutin®
Wet and dry strength agents – Giluton®
Deposit control – Turbodispin®
Defoamers for de-aeration and foam control – Kurita® FC
Pitch and sticky control – Gilufix®
Inorganic flocculants and fixatives – Kuriflock
Retention agents, flocculants, fixing agents – Kuriflock
Efficiency boost technologies for paper dryer section – Kurita PJ
17. 17
Dosing, monitoring & control
Modular multiparameter platform for cooling water monitoring –
S.sensing MX
Wastewater real time monitoring & dosing control – S.sensing CS
New generation of on-line biofilm & scale monitoring – HydroBio®
Advance
The state of the art equipment solutions for in-situ biocide – Dilurit®
BC S-System
On-line product actives & key performance indicator monitoring
Optimal system performance & chemical dosage ratio
19. 19
We help you get to the bottom of your problem
Establishment of the best
treatment concept
Simulation of different
operational conditions
Applied research &
development
20. 20
We offer expanded support
Maximising
your production
Protecting
your assets
Minimising
your
Total Cost
of Operation
Meeting
stringent
regulations
Commitment
to safety and
environment
21. 21
We minimise your Total Cost of Ownership
Euro
Dollar
Yen
Kurita TCO tools –
a new way for total
cost reduction
A refinery
saves 170,000€
annually in energy and
water using Cetamine®
boiler water treatment
program.
A steel mill
saves 200,000€
annually in water and
disposal costs using
Cetamine® closed circuit
treatment technology.
A paper mill reduces
by 50% its water
consumption with
Cetamine® boiler water
treatment technology.
Biocide dosing reduced
by 20% with HydroBio
Advance® monitoring &
control technology.
We are ready to create a TCO project for you
22. 22
Our comprehensive service includes
System survey and system analysis
Development of customised treatment concepts and specific
cleaning procedures
Analytics on-site and in own laboratories
Remote control, online data transfer
Training of your staff
Consulting for plant optimization, design and equipment choice
Logistics (transport & stock management)
24. 24
We understand the challenges of each industry
We partner with heavy industry to maximise production, protect assets and
streamline its environmental footprint.
Steel & Coke Power Generation Refinery & Petrochemicals
25. 25
We understand the challenges of each industry
We help our customers in the institutional market to meet stringent
environmental regulations with a broad suite of technologies and trusted
expertise.
Waterworks Wastewater Swimming Pool Water
26. 26
We understand the challenges of each industry
For the middle market we optimise product quality and plant productivity
through innovative solutions.
Food & Beverage Chemical & Pharmaceutical Automotive
27. Tissue & Towel
27
We understand the challenges of each industry
We help the paper industry optimise its operations and meet the challenges of
limited resources.
Specialty Paper Printing & Writing Packaging & Board
29. 29
Hundreds of references from satisfied customers
Food & Beverage
Automotive Industry
Steel & Coke Desalination
General Manufacturing
Pharmaceutical Industries
Power Plants
Chemical industries
Construction
Ammonia Plants
Refineries
Paper Mills Petrochemical Industries
31. 31
Kurita Group – a global trusted solutions provider
6,600
people in
100
countries
3,500
in the field
2.3
billion USD
Sales 2018
2.2% R&D
expenses
>2,400
patents
32. 32
Milestones of history – the Kurita Group
1949 1951 1973 1997 2003
ENTRY
• Entry into water
treatment facilities
business.
• Establishment of first
R&D centre.
KURITA WATER &
ENVIRONMENT
FOUNDATION
The foundation promotes
selected science projects
concerning water and
environment.
DEVELOPMENT
Development of ultrapure
water production
technology for the
electronics industry.
NATURE-STOCK-
INDEX LISTING
The Kurita Group is one of
only 30 worldwide
enterprises listed in
the NAI.
FOUNDATION
• Foundation of the Kurita
Group in Japan.
• Sales of chemicals for boiler
water treatment.
33. 33
Kurita´s distinctive business portfolio
• Boiler water
• Cooling water
• Wastewater
• Process
• Contract-type products
• Chemical injection equipment
• Water quality analysis etc.
Water treatment chemicals
• Ultrapure water production
systems
• Water treatment systems
• Wastewater treatment systems
• Wastewater reclamation
systems
Water treatment facilities
• Maintenance services
• Ultrapure water supply business
• Tool cleaning services
• Soil and groundwater remediation
• Chemical cleaning
• Boiler facilities
Maintenance services, operation management, etc.
34. The Kurita Global Technology
Center of Kurita Water
Industries in Nogi-machi,
Tochigi.
NEW TECHNOLOGIES
34
European center conducts
R&D of water treatment
chemicals, water quality
analysis and Geothermal
systems.
Kurita R&D Asia Pte. Ltd. is
seeking to develop
technologies for the
desalination and
recycling of
wastewater
Kurita´s R&D centers
35. Intellectual property rights
Overseas brand
1,712
Japanese patents
(in process & held)
1,926*
Overseas patents
(in process & held)
1,083*
5,392
Total
35
Our capabilities
Japanese brand
671
(As of March 31, 2016)
*Sum of patent applications, registrations and patents held.
37. “A Creator of unique value to the solution of
water and environment“, contributing to the
realization of a sustainable society.
37
Kurita contributes to society through water
Philosophy
Vision
Kurita
Study the properties of water, master them,
and we will create an environment in which
nature and man are in harmony
38. 38
The basis of Kurita´s judgments and actions
Fairness
Transparency
Integrity
Safety
Compatibility
Conduct business activities in a fair manner, moving away from old values and
ideas that are no longer appropriate.
Conduct business activities with transparency, while adopting proactively the
rules of international society.
Conduct business activities in a sincere manner, while meeting social
expectations and further enhancing our reputation as a company true to its word.
We provide high-quality products & services while minimizing negative impacts
that technologies may have on the lives and properties of people.
To ensure the compatibility of economic growth and environmental protection;
keeping the global environment in good shape for the next generation.
40. 40
Latest news at a glance
1Click here
Acquisition of
Avista
Technologies,
Inc. and Avista
Technologies
(UK) Ltd.
2Click here
My Kurita
Portal: smart
management of
your water
treatments and
systems
3Click here
Production
plant in Ambès,
France
4Click here
Subsidiary in
Dubai – Kurita
Middle East
FZE
5Click here
Acquisitions to
enlarge
presence in US
41. On May 13, 2019 decision to acquire 100% of the outstanding shares of
Avista Technologies, Inc. and Avista Technologies (UK) Ltd.
Acquisition through Kurita America Holdings Inc. and Kurita Europe GmbH
Stock transfer agreement
41
Avista Technologies, a Kurita company
Expanding the product lineup of RO chemicals
42. • Digital innovation for smart management of your water treatments and systems
• Innovative, secure and private platform for continuous and direct communication with the
customers
• Ensuring operational excellence by:
Collecting automatic data
Storing parameters
Generating uniform and accurate reports
Sharing documents/ information at anytime, anywhere.
42
My Kurita Portal
43. 43
• Kurita Europe boosts Wet Strength Agent
(WSA) capabilities with the production
plant in Ambès, France. The acquisition
was officially completed by February 1st,
2018
• This plant was part of Akzo Nobel since
1992 and certificated with the integrated
system QSE, ISO 9001/14001. The plant
is located in Ambès in France and has a
capacity of 25.000T/y.
• The acquisition will reinforce the presence
of Kurita in the Wet Strength Agent (WSA)
market in South Europe for tissue and
speciality paper products.
Boost of Wet Strength Agent capabilities
44. 44
Subsidiary in Dubai – Kurita Middle East FZE
Kurita
Middle
East FZE
Kurita Middle East FZE
Office 1010, Floor 10,
Jafza One, Jebel Ali Free Zone,
P.O. Box 263958
Dubai, United Arab Emirates
Phone: +971 0 48820027
Fax: +971 0 48820029
Your contact:
45. 45
Acquisitions to enlarge presence in US
Acquisition of Fremont
Industries, LLC on January 3,
2017
Acquisition of U.S. Water
Services, Inc on March 26,
2019
Water treatment chemicals manufacturing and sales company
100% equity interests through Kurita America Holdings Inc.
46. 46
Latest news at a glance
6Click here
Kurita´s
Upcoming
Technology
Transformation
7Click here
Strengthening
businesses in
South Korea
8Click here
R&D base in
Singapore
9Click here
High-efficiency
energy
conservation
product
10Click here
Kurita´s next
generation
water recycling
system
47. 47
Kurita´s Upcoming Technology Transformation
Acquisition of APANA Inc. on
December 31, 2016
New IoT Technology: LoRa
Big Data Analysis
FRACTA Inc, California, USA
launched software service for
predicting water main pipe
degradation
AI : Artificial Intelligence
ML : Machine Learning
48. 48
• Kurita Water Industries Ltd. acquired
approx. 50% of the issued shares of
Hansu Co., Ltd., an equity method
company in South Korea, on November
30, 2017.
• As a result of this acquisition, Kurita’s
equity stake in Hansu Co., Ltd. increased
to 85% and the company became Kurita’s
consolidated subsidiary.
• The acquisition of the shares of Hansu
Co., Ltd. was carried out as a measure for
strengthening businesses in South Korea,
one of the strategically important markets
in Asia.
Kurita strengthened business in South Korea
49. 49
• 4th R&D center of the Kurita Group is
based in Singapore
• Establishment on April 29, 2017: Kurita
R&D Asia Pte.Ltd.
• Mission: to develop global advanced
technologies to solve these water
resource issues
• Focus: developing technologies for
desalination and the recycling of
wastewater
Research and Development Base in Singapore
50. 50
• DReeM Polymer™ is a multi-functional
polymer that contributes to customer's energy
saving by keeping boiler facilities continuously
cleaned
• February 2018: DReeM Polymer™ won
Energy Conservation Center Chairman’s
Award in the Products and Business Models
category of the 2017 Energy Conservation
Grand Prize, which is organized by the Energy
Conservation Center, Japan
• May 2017: DReeM Polymer™ won
Environmental Technology Award at the 49th
JCIA Technology Award hosted by the Japan
Chemical Industry Association (JCIA)
Award for high-efficiency energy conservation product
51. 51
Kurita´s next generation water recycling system
Why is a water recovery
system necessary?
• Several thousand dollars
per 1 kg of water
• Delivery time: 5 days
Kurita´s next generation
water recycling system:
• System installation in the
Japanese experiment
module „Kibo“ on ISS
Background Solution Benefits
• High water recovery rate:
recycling rate of 85% or
more
• Low power consumption
• No maintenance needed
Picture povided by JAXA
52. 52
How it works
Magnesium and calcium components in
the urine are removed through the ion
exchange reaction caused by the cation
exchange resin. This prevents the
adhesion and deposition of water-
insoluble components (scale trouble) in
the later stages.
Ion exchange
1
The organic compounds in the ion
exchange water are decomposed by the
oxidizing substances created by the
electrolysis of water.
Electrolysis
2
The remaining ions from the previous
process are removed by the ion exchange
film that allows only specific ions to pass
through. This leaves treated water that is
of drinkable level quality. In addition, the
remaining ions are separated into cations
and anions to produce acid and alkali.
These are used to regenerate ion
exchange resins.
Electrodialysis
3
53. 53
Collaboration between Kurita and JAXA
2011
Start of collaboration
agreement with JAXA
2015
The JEM* Water Recovery System
(Engineering model) was
constructed
2016
Transport to the ISS
and start of operation
2030
Utilisation on the Mars
expedition?
*JEM: Japanese Experiment Module “KIBOU“
55. 55
Contact information
TWITTER Follow us
LinkedIn Follow us
YouTube Follow us
www.kurita.eu
This document is proprietary. Any kind of reproduction, change, transfer to a third party or disclosure of this document, even extracts, requires the prior written consent of Kurita Europe GmbH.