KPD ppt
•
0 likes•406 views
Three units of sales gas compressors with Zorya UGT6000i mechanical drive gas turbines were delivered in March 2015 to the Oil & Gas Development Corporation of Pakistan for the Kunar Gas Field Project. The DGS system was on a skid by Nebot FSD and included all dry gas seals. The core engine was a Zorya – UGT 6000i and the package was designed by Harbin Guanghan Gas Turbine Design Institute 703.
Report
Share
Report
Share
Download to read offline
Recommended
Pampore Gas turbine power station
The Pampore Gas Turbine Power Station is located in Pulwama, Jammu and Kashmir. It has a total installed capacity of 75 MW from three gas turbine units commissioned between 1989 and 1989. A second phase was added with seven additional gas turbine units bringing the total installed capacity to 100 MW. All units operate on gas fuel and are currently operational.
Panks tables
The document contains the table of contents for a report on Kalisindh Thermal Power Plant. The table of contents lists 7 chapters that will be covered in the report, including chapters on the coal handling plant, important parts of the thermal power plant like the boiler, turbine, generator and condenser, the ESP and ash handling plant system, controlling and transmission systems, and efficiency. It also includes lists of figures and tables that will be referenced in the report.
Berg and gtuit system - Reduce Oil and Gas Flaring | berg chilling systems 2
Berg and gtuit system - Reduce Oil and Gas Flaring | berg chilling systems 2Berg Chilling Systems Inc.
Gtuit teams up with Berg Chilling Inc. to turn wellhead flare gas headaches into benefits. Using refrigeration technology, the two companies have managed to capture, reduce and recycle material that would have been burned off and wasted into the atmosphere.
Product Review - Fuel Saving Hydrosynthetic Hydraulic Fluid
The document summarizes the results of a field test comparing a standard hydraulic fluid to a Hydrotex hydraulic fluid on a Caterpillar 318C L excavator. Over nine days of operation, fuel consumption was measured with each fluid at different engine throttle settings. On average, the Hydrotex fluid provided a 3-5% fuel savings compared to the standard fluid. Specifically, on days with the Hydrotex fluid the excavator consumed 3-5% less fuel than when using the standard fluid under equivalent operating conditions.
Product Review Fuel Saving Hydrosynthetic Hydraulic Fluid
The document summarizes the results of a field test comparing the fuel efficiency of a Caterpillar 318C L excavator using two different hydraulic fluids. Over nine days of operation under various conditions, the excavator's fuel consumption was measured when using its original Cat 10W hydraulic fluid and when using Hydrotex Fuel Saving Hydrosynthetic hydraulic fluid. Using the Hydrotex fluid, the excavator demonstrated fuel savings of up to 7% at full throttle operation and up to 5% at 90% throttle. The test followed a standardized work cycle protocol to ensure equivalent workloads when comparing the two fluids.
Combined Cycle Power Plant
The document discusses combined cycle power plants. It describes how a combined cycle power plant uses both a gas turbine and a steam turbine together to generate electricity from the same fuel source. The gas turbine burns fuel to power a generator, while the waste heat from the gas turbine is used to create steam in a heat recovery system. This steam then powers a steam turbine which generates additional electricity. Combined cycle power plants have higher efficiency than single cycle plants and produce electricity through the combined use of a gas turbine and steam turbine powered by the same fuel source.
NTPC anta
This presentation provides an overview of power generation at NTPC's Anta power plant. It discusses the key components of a combined cycle power plant, including the gas turbine, waste heat recovery boiler, and steam turbine. It also explains the basic processes involved, such as the Brayton cycle for gas turbines and Rankine cycle for steam turbines. The presentation aims to educate about how NTPC generates reliable power through an efficient combined cycle process that integrates gas and steam turbines to maximize energy output.
CARNOT ENGINE Priyanka kushwah
The document discusses Sadi Carnot's ideal Carnot engine from 1824. The Carnot engine is a theoretical, reversible engine that operates between a hot reservoir at temperature T1 and a cold reservoir at temperature T2. It provides the maximum possible efficiency for converting heat into work, with its efficiency depending only on the temperatures of the reservoirs. The main components of the Carnot engine are an infinite heat source, an infinite heat sink, a perfect insulating plate, and a frictionless piston-cylinder assembly containing the working gas.
Recommended
Pampore Gas turbine power station
The Pampore Gas Turbine Power Station is located in Pulwama, Jammu and Kashmir. It has a total installed capacity of 75 MW from three gas turbine units commissioned between 1989 and 1989. A second phase was added with seven additional gas turbine units bringing the total installed capacity to 100 MW. All units operate on gas fuel and are currently operational.
Panks tables
The document contains the table of contents for a report on Kalisindh Thermal Power Plant. The table of contents lists 7 chapters that will be covered in the report, including chapters on the coal handling plant, important parts of the thermal power plant like the boiler, turbine, generator and condenser, the ESP and ash handling plant system, controlling and transmission systems, and efficiency. It also includes lists of figures and tables that will be referenced in the report.
Berg and gtuit system - Reduce Oil and Gas Flaring | berg chilling systems 2
Berg and gtuit system - Reduce Oil and Gas Flaring | berg chilling systems 2Berg Chilling Systems Inc.
Gtuit teams up with Berg Chilling Inc. to turn wellhead flare gas headaches into benefits. Using refrigeration technology, the two companies have managed to capture, reduce and recycle material that would have been burned off and wasted into the atmosphere.
Product Review - Fuel Saving Hydrosynthetic Hydraulic Fluid
The document summarizes the results of a field test comparing a standard hydraulic fluid to a Hydrotex hydraulic fluid on a Caterpillar 318C L excavator. Over nine days of operation, fuel consumption was measured with each fluid at different engine throttle settings. On average, the Hydrotex fluid provided a 3-5% fuel savings compared to the standard fluid. Specifically, on days with the Hydrotex fluid the excavator consumed 3-5% less fuel than when using the standard fluid under equivalent operating conditions.
Product Review Fuel Saving Hydrosynthetic Hydraulic Fluid
The document summarizes the results of a field test comparing the fuel efficiency of a Caterpillar 318C L excavator using two different hydraulic fluids. Over nine days of operation under various conditions, the excavator's fuel consumption was measured when using its original Cat 10W hydraulic fluid and when using Hydrotex Fuel Saving Hydrosynthetic hydraulic fluid. Using the Hydrotex fluid, the excavator demonstrated fuel savings of up to 7% at full throttle operation and up to 5% at 90% throttle. The test followed a standardized work cycle protocol to ensure equivalent workloads when comparing the two fluids.
Combined Cycle Power Plant
The document discusses combined cycle power plants. It describes how a combined cycle power plant uses both a gas turbine and a steam turbine together to generate electricity from the same fuel source. The gas turbine burns fuel to power a generator, while the waste heat from the gas turbine is used to create steam in a heat recovery system. This steam then powers a steam turbine which generates additional electricity. Combined cycle power plants have higher efficiency than single cycle plants and produce electricity through the combined use of a gas turbine and steam turbine powered by the same fuel source.
NTPC anta
This presentation provides an overview of power generation at NTPC's Anta power plant. It discusses the key components of a combined cycle power plant, including the gas turbine, waste heat recovery boiler, and steam turbine. It also explains the basic processes involved, such as the Brayton cycle for gas turbines and Rankine cycle for steam turbines. The presentation aims to educate about how NTPC generates reliable power through an efficient combined cycle process that integrates gas and steam turbines to maximize energy output.
CARNOT ENGINE Priyanka kushwah
The document discusses Sadi Carnot's ideal Carnot engine from 1824. The Carnot engine is a theoretical, reversible engine that operates between a hot reservoir at temperature T1 and a cold reservoir at temperature T2. It provides the maximum possible efficiency for converting heat into work, with its efficiency depending only on the temperatures of the reservoirs. The main components of the Carnot engine are an infinite heat source, an infinite heat sink, a perfect insulating plate, and a frictionless piston-cylinder assembly containing the working gas.
Steam Engine Revolution presentation
The SER technology can significantly change the operation and emission of coal fired power plants, and it can also improve their adjudication too. An SER power plant will be much more efficient; will be able to produce more energy with the use of the same amount of coal quantity.
Energy efficiency tip of the day (Boiler energy saving opportunities for Firi...
Energy saving opportunities for the boiler (Firing side)
1. Preheat combustion air with waste heat (22 C reduction in flue gas temperature increases boiler efficiency by 1%).
2. Use variable speed drives on large boiler combustion air fans with variable flows.
3. Improve oxygen trim control (e.g. -- limit excess air to less than 10% on clean fuels). 5% reduction in excess air increases boiler efficiency by 1% or: 1% reduction of residual oxygen in stack gas increases boiler efficiency by 1%.)
4. Inspect for soot, flyash, and slag on the fire side (A 3 mm thick soot deposition on the heat transfer surface can cause an increase in fuel consumption to the tune of 2.5%.)
For more energy saving tips, please visit www.360proactiveengineer.com
Ntpc anta training presentation
Nishant Pareek completed a summer training at the ANTA Gas Power Station owned by NTPC Ltd. The presentation summarized the power station's components and operations. The station has 3 gas turbines each rated at 88.71 MW that drive generators. Exhaust from the gas turbines is used to generate steam in a waste heat recovery boiler which powers a 153.2 MW steam turbine. Key components and maintenance practices for the gas turbines, boiler, and steam turbine were described. The power generated is allocated to various states in northern India.
Prashant ppt on ntpc anta
The presentation provides an overview of the NTPC Anta gas power plant in Rajasthan, India. It discusses the gas turbine process which involves compressing air, combusting it with fuel, and expanding the combustion products through a turbine. The plant uses natural gas as its primary fuel. It has a total installed capacity of 419.33 MW from 3 gas turbine units and 1 steam turbine unit in a combined cycle configuration. Measurements of processes like pressure, temperature, flow and electrical parameters are crucial to operations. Power is evacuated from the plant using six 220kV transmission lines.
Combine cycle power plant
The document discusses gas and steam turbine combined cycle power plants. It explains that a gas turbine produces waste heat that is used to generate steam in a heat recovery steam generator, and the steam then powers a steam turbine. The document provides details on the components of combined cycle power plants, including the gas turbine, HRSG, and steam turbine. It also discusses the materials, types, cycles, emissions controls, and economics of combined cycle power plants.
PRASHANT ABSTRACT NTPC ANTA
The document summarizes the key components and processes involved in the modified Rankine cycle used in thermal power plants to convert the chemical energy of fossil fuels into electrical energy. The cycle involves using a boiler feed pump, steam generator with water walls and superheaters, a re-heater, condenser, and regenerative feed heaters. Reheating and regenerative heating are two important additions to the modified Rankine cycle that allow steam to do more work in the turbine and improve efficiency by reheating steam after the exhaust and using regenerative heaters.
Natural gas generators – August 2011
The document contains listings for several natural gas generator sets for sale by Worldwide Power Products. It provides details on the manufacturer, model, power ratings, and other specifications for each generator set, which are from manufacturers like Caterpillar, Solar, and Olympian. Worldwide Power Products specializes in power generation equipment for industries like marine, oil and gas, and offers over 100 new and used generator sets and engines.
Att of ceh
This certificate acknowledges that Mohamed ahmed Elnaeim suliman successfully completed a Certified Ethical Hacker v9 course at Kit Education on May 16, 2016 with instructor Mr. Amreet Monoj Visal. The certificate number is 88533 and authenticity can be verified online at the provided URL.
OIL SYSTEM
The document appears to be a Haiku Deck presentation containing 5 photos from various photographers related to the USS Theodore Roosevelt aircraft carrier and the U.S. 7th Fleet. The presentation encourages the viewer to be inspired and create their own Haiku Deck presentation on SlideShare.
Ketuban pecah dini ppt
Ketuban pecah dini atau KPD adalah ketika ketuban pecah sebelum usia kehamilan 37 minggu. KPD dapat disebabkan oleh berbagai faktor seperti infeksi, riwayat KPD sebelumnya, atau merokok. Penderita KPD dapat mengalami komplikasi seperti persalinan prematur, infeksi, atau asfiksia janin. Penatalaksanaannya meliputi pemberian antibiotik, kortikosteroid, dan induksi persalinan tergant
Nebot Fluid Science Dynamics Tianjin
Nebot Fluid Science Dynamics in Tianjin, China is a provider of compressor shaft-line component solutions such as dry gas seals, high performance couplings, and magnetic bearings. They have over 50 years of experience in these fields. Recent successes include designing, manufacturing, and testing dry gas seals capable of pressures up to 250bar and shaft diameters of 300mm. Nebot has also completed over 120 dry gas seal repairs and provided spares. They are currently working with a university on next-generation spiral groove and diamond coating technologies.
Reducing Emissions From Compressor Seals
The document discusses methane emissions from compressor seals in natural gas transmission and provides lessons learned from replacing rod packings and wet seals with lower-emitting alternatives. It finds that compressor seals account for 13% of methane emissions from the natural gas industry. Replacing worn rod packings and wet seals with dry seals can significantly reduce methane emissions in a cost-effective manner, with some partners achieving payback periods of less than one year. The document outlines multi-step processes used by industry partners to identify candidates for replacement and evaluate the economic benefits of implementing lower-emitting technologies.
Solar turbine plants
This document discusses solar turbine power plants. It describes how solar energy is captured using collectors and transmitted to a working fluid. Solar turbine plants can use Rankine or Brayton cycles, with Brayton used at higher temperatures. The key elements of solar power plants include collectors, receivers, and turbines. Different types of collectors like low, medium, and high temperature collectors are used to absorb solar energy. Receivers then absorb the heat from collectors to heat a coolant or working fluid. Solar energy can be stored in solar ponds for later use. The advantages of solar turbine plants are that they produce power without pollution, but the disadvantages include intermittent sunshine and the need for large land areas and heat storage systems.
power generation
The document provides information about sections and voters in an election. It lists the following sections and number of voters in each:
Section 1: Abdulhamid Ibrahim Jamal Ibrahim: 1 voter
Section 2: Abdelraziq Nabil Ahmad: 1 voter
Section 3: Ahmad Mahmoud Shihata Ahmad Abdallah: 2 voters
Section 1: Ahmad Said Hussein Abdelrahman: 1 voter
Coal vs gas Power generation
1) The document discusses gas turbine combustion systems and provides an overview of the speaker's background working in the gas turbine industry.
2) It then covers various topics related to gas turbine combustors such as design requirements, combustion chemistry, alternative fuels, and challenges with variable load conditions.
3) Finally, it discusses the speaker's current role at Solar Turbines and provides technical details about gas turbine cycles, components, and performance parameters.
Varnish in turbine lube
This document discusses varnish formation in gas turbine systems and methods for measuring and removing varnish. Varnish is an insoluble deposit that forms from the breakdown of oil additives and contributes to increased operating temperatures, plugged filters, and valve issues. The rate of varnish precursor generation is higher under severe operating conditions and their removal is important to prevent downtime. Methods for measuring varnish potential include FTIR, particle counting, and color patch tests. Varnish can be removed through electrostatic filtration, chemical cleaning, or adsorption filtration which utilizes the affinity of filter media for varnish particles.
Gas turbine driven compressors
A gas turbine drives a reciprocating compressor to compress natural gas from a pipeline at 55 bar into underground storage caverns at 150 bar. A two-stage gearbox connects the gas turbine to the compressor, stepping down the turbine speed of 333 rpm for the compressor. Gas turbines convert the heat of fuel into mechanical energy via compression, combustion, and expansion components to power generators or machinery. They are more efficient than other internal combustion engines due to operating in a continuous thermodynamic cycle.
Industrial Mechanical Seal by Leak - End Engineers, Mumbai
Started to create milestones, we Leak - End Engineers marked our presence in the year 2011 and operates in the manufacturing/servicing of Dry Running Seal,Teflon Mechanical Seal For Pumps,Viton Bellow Seals,Conical Spring Seal,Single Rubber Bellows since 1 years.Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of Dry Running Seal,Teflon Mechanical Seal For Pumps,Viton Bellow Seals,Conical Spring Seal,Single Rubber Bellows, Industrial Mechanical Seal that has made us to deepen our roots in the market.We Leak - End Engineers breathe with the aim to satisfy our clients with our smart products/services.We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
Generator cooling and sealing system 2
The document provides details about the cooling and sealing system of a 247MVA turbo generator. It describes the generator specifications including rating, connection type, phases, rated speed, and insulation class. It then summarizes the need for generator cooling using hydrogen gas and water to minimize heat and ensure uniform temperature distribution. The rotor and stator cooling systems are explained along with specifications. Finally, the generator sealing system is outlined, which uses seal oil to prevent hydrogen leakage and maintain differential pressure between the oil and hydrogen.
00 elbarougy turbine Course Hapy
This document provides an agenda for an O&M Gas Turbine course. It lists the instructor's contact information and covers various gas turbine topics including basic knowledge, components, systems, operation, history, cycles, bearing types, valve types, seals, electrical systems, instrumentation loops, and a Solar electric schematic. Slides are included on compressors, electrical systems, and explosion proof equipment. The course aims to give attendees an overview of gas turbine systems and components.
Compressors - Training sessions
A compressor is a mechanical device that increases the pressure of a compressible fluid like air or gas by reducing its volume. It works similarly to a pump but for gases, which are compressible, rather than liquids. There are several types of compressors including reciprocating, rotary, centrifugal, and axial. Centrifugal compressors use rotary impellers to increase the velocity and pressure of a gas by pulling it through a curved casing. Key components include impellers, diffusers, bearings, seals, and casings. Compressors are selected based on various parameters like the gas handled, flow rates, pressures, and temperature.
More Related Content
What's hot
Steam Engine Revolution presentation
The SER technology can significantly change the operation and emission of coal fired power plants, and it can also improve their adjudication too. An SER power plant will be much more efficient; will be able to produce more energy with the use of the same amount of coal quantity.
Energy efficiency tip of the day (Boiler energy saving opportunities for Firi...
Energy saving opportunities for the boiler (Firing side)
1. Preheat combustion air with waste heat (22 C reduction in flue gas temperature increases boiler efficiency by 1%).
2. Use variable speed drives on large boiler combustion air fans with variable flows.
3. Improve oxygen trim control (e.g. -- limit excess air to less than 10% on clean fuels). 5% reduction in excess air increases boiler efficiency by 1% or: 1% reduction of residual oxygen in stack gas increases boiler efficiency by 1%.)
4. Inspect for soot, flyash, and slag on the fire side (A 3 mm thick soot deposition on the heat transfer surface can cause an increase in fuel consumption to the tune of 2.5%.)
For more energy saving tips, please visit www.360proactiveengineer.com
Ntpc anta training presentation
Nishant Pareek completed a summer training at the ANTA Gas Power Station owned by NTPC Ltd. The presentation summarized the power station's components and operations. The station has 3 gas turbines each rated at 88.71 MW that drive generators. Exhaust from the gas turbines is used to generate steam in a waste heat recovery boiler which powers a 153.2 MW steam turbine. Key components and maintenance practices for the gas turbines, boiler, and steam turbine were described. The power generated is allocated to various states in northern India.
Prashant ppt on ntpc anta
The presentation provides an overview of the NTPC Anta gas power plant in Rajasthan, India. It discusses the gas turbine process which involves compressing air, combusting it with fuel, and expanding the combustion products through a turbine. The plant uses natural gas as its primary fuel. It has a total installed capacity of 419.33 MW from 3 gas turbine units and 1 steam turbine unit in a combined cycle configuration. Measurements of processes like pressure, temperature, flow and electrical parameters are crucial to operations. Power is evacuated from the plant using six 220kV transmission lines.
Combine cycle power plant
The document discusses gas and steam turbine combined cycle power plants. It explains that a gas turbine produces waste heat that is used to generate steam in a heat recovery steam generator, and the steam then powers a steam turbine. The document provides details on the components of combined cycle power plants, including the gas turbine, HRSG, and steam turbine. It also discusses the materials, types, cycles, emissions controls, and economics of combined cycle power plants.
PRASHANT ABSTRACT NTPC ANTA
The document summarizes the key components and processes involved in the modified Rankine cycle used in thermal power plants to convert the chemical energy of fossil fuels into electrical energy. The cycle involves using a boiler feed pump, steam generator with water walls and superheaters, a re-heater, condenser, and regenerative feed heaters. Reheating and regenerative heating are two important additions to the modified Rankine cycle that allow steam to do more work in the turbine and improve efficiency by reheating steam after the exhaust and using regenerative heaters.
What's hot (6)
Energy efficiency tip of the day (Boiler energy saving opportunities for Firi...
Energy efficiency tip of the day (Boiler energy saving opportunities for Firi...
Viewers also liked
Natural gas generators – August 2011
The document contains listings for several natural gas generator sets for sale by Worldwide Power Products. It provides details on the manufacturer, model, power ratings, and other specifications for each generator set, which are from manufacturers like Caterpillar, Solar, and Olympian. Worldwide Power Products specializes in power generation equipment for industries like marine, oil and gas, and offers over 100 new and used generator sets and engines.
Att of ceh
This certificate acknowledges that Mohamed ahmed Elnaeim suliman successfully completed a Certified Ethical Hacker v9 course at Kit Education on May 16, 2016 with instructor Mr. Amreet Monoj Visal. The certificate number is 88533 and authenticity can be verified online at the provided URL.
OIL SYSTEM
The document appears to be a Haiku Deck presentation containing 5 photos from various photographers related to the USS Theodore Roosevelt aircraft carrier and the U.S. 7th Fleet. The presentation encourages the viewer to be inspired and create their own Haiku Deck presentation on SlideShare.
Ketuban pecah dini ppt
Ketuban pecah dini atau KPD adalah ketika ketuban pecah sebelum usia kehamilan 37 minggu. KPD dapat disebabkan oleh berbagai faktor seperti infeksi, riwayat KPD sebelumnya, atau merokok. Penderita KPD dapat mengalami komplikasi seperti persalinan prematur, infeksi, atau asfiksia janin. Penatalaksanaannya meliputi pemberian antibiotik, kortikosteroid, dan induksi persalinan tergant
Nebot Fluid Science Dynamics Tianjin
Nebot Fluid Science Dynamics in Tianjin, China is a provider of compressor shaft-line component solutions such as dry gas seals, high performance couplings, and magnetic bearings. They have over 50 years of experience in these fields. Recent successes include designing, manufacturing, and testing dry gas seals capable of pressures up to 250bar and shaft diameters of 300mm. Nebot has also completed over 120 dry gas seal repairs and provided spares. They are currently working with a university on next-generation spiral groove and diamond coating technologies.
Reducing Emissions From Compressor Seals
The document discusses methane emissions from compressor seals in natural gas transmission and provides lessons learned from replacing rod packings and wet seals with lower-emitting alternatives. It finds that compressor seals account for 13% of methane emissions from the natural gas industry. Replacing worn rod packings and wet seals with dry seals can significantly reduce methane emissions in a cost-effective manner, with some partners achieving payback periods of less than one year. The document outlines multi-step processes used by industry partners to identify candidates for replacement and evaluate the economic benefits of implementing lower-emitting technologies.
Solar turbine plants
This document discusses solar turbine power plants. It describes how solar energy is captured using collectors and transmitted to a working fluid. Solar turbine plants can use Rankine or Brayton cycles, with Brayton used at higher temperatures. The key elements of solar power plants include collectors, receivers, and turbines. Different types of collectors like low, medium, and high temperature collectors are used to absorb solar energy. Receivers then absorb the heat from collectors to heat a coolant or working fluid. Solar energy can be stored in solar ponds for later use. The advantages of solar turbine plants are that they produce power without pollution, but the disadvantages include intermittent sunshine and the need for large land areas and heat storage systems.
power generation
The document provides information about sections and voters in an election. It lists the following sections and number of voters in each:
Section 1: Abdulhamid Ibrahim Jamal Ibrahim: 1 voter
Section 2: Abdelraziq Nabil Ahmad: 1 voter
Section 3: Ahmad Mahmoud Shihata Ahmad Abdallah: 2 voters
Section 1: Ahmad Said Hussein Abdelrahman: 1 voter
Coal vs gas Power generation
1) The document discusses gas turbine combustion systems and provides an overview of the speaker's background working in the gas turbine industry.
2) It then covers various topics related to gas turbine combustors such as design requirements, combustion chemistry, alternative fuels, and challenges with variable load conditions.
3) Finally, it discusses the speaker's current role at Solar Turbines and provides technical details about gas turbine cycles, components, and performance parameters.
Varnish in turbine lube
This document discusses varnish formation in gas turbine systems and methods for measuring and removing varnish. Varnish is an insoluble deposit that forms from the breakdown of oil additives and contributes to increased operating temperatures, plugged filters, and valve issues. The rate of varnish precursor generation is higher under severe operating conditions and their removal is important to prevent downtime. Methods for measuring varnish potential include FTIR, particle counting, and color patch tests. Varnish can be removed through electrostatic filtration, chemical cleaning, or adsorption filtration which utilizes the affinity of filter media for varnish particles.
Gas turbine driven compressors
A gas turbine drives a reciprocating compressor to compress natural gas from a pipeline at 55 bar into underground storage caverns at 150 bar. A two-stage gearbox connects the gas turbine to the compressor, stepping down the turbine speed of 333 rpm for the compressor. Gas turbines convert the heat of fuel into mechanical energy via compression, combustion, and expansion components to power generators or machinery. They are more efficient than other internal combustion engines due to operating in a continuous thermodynamic cycle.
Industrial Mechanical Seal by Leak - End Engineers, Mumbai
Started to create milestones, we Leak - End Engineers marked our presence in the year 2011 and operates in the manufacturing/servicing of Dry Running Seal,Teflon Mechanical Seal For Pumps,Viton Bellow Seals,Conical Spring Seal,Single Rubber Bellows since 1 years.Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of Dry Running Seal,Teflon Mechanical Seal For Pumps,Viton Bellow Seals,Conical Spring Seal,Single Rubber Bellows, Industrial Mechanical Seal that has made us to deepen our roots in the market.We Leak - End Engineers breathe with the aim to satisfy our clients with our smart products/services.We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
Generator cooling and sealing system 2
The document provides details about the cooling and sealing system of a 247MVA turbo generator. It describes the generator specifications including rating, connection type, phases, rated speed, and insulation class. It then summarizes the need for generator cooling using hydrogen gas and water to minimize heat and ensure uniform temperature distribution. The rotor and stator cooling systems are explained along with specifications. Finally, the generator sealing system is outlined, which uses seal oil to prevent hydrogen leakage and maintain differential pressure between the oil and hydrogen.
00 elbarougy turbine Course Hapy
This document provides an agenda for an O&M Gas Turbine course. It lists the instructor's contact information and covers various gas turbine topics including basic knowledge, components, systems, operation, history, cycles, bearing types, valve types, seals, electrical systems, instrumentation loops, and a Solar electric schematic. Slides are included on compressors, electrical systems, and explosion proof equipment. The course aims to give attendees an overview of gas turbine systems and components.
Compressors - Training sessions
A compressor is a mechanical device that increases the pressure of a compressible fluid like air or gas by reducing its volume. It works similarly to a pump but for gases, which are compressible, rather than liquids. There are several types of compressors including reciprocating, rotary, centrifugal, and axial. Centrifugal compressors use rotary impellers to increase the velocity and pressure of a gas by pulling it through a curved casing. Key components include impellers, diffusers, bearings, seals, and casings. Compressors are selected based on various parameters like the gas handled, flow rates, pressures, and temperature.
Dry gas seal Systems
This slide describe seal gas system in compressor. This Slide is divided into three part: - What is seal gas ? - The function of seal gas? - Description Equipment in Seal gas systems
Gas turbine
This document summarizes the key components and operation of a gas turbine located at the Panipat Refinery. It includes 5 gas turbines made by BHEL/GE that are MS 6000 single shaft design units with a base load capacity of 30.77 MW each. The major components discussed include the compressor, combustors, turbine section, casings, bearings, and cooling/sealing systems. It also provides details on the basic principles of how a gas turbine works by continuously drawing in air, compressing it, adding fuel to increase its energy, directing the high pressure gas to expand through a turbine, and exhausting the low pressure gas.
Applications of Solar Energy
This document summarizes different types of solar thermal power plants. It describes low, medium, and high temperature plants. Low temperature plants use flat plate collectors and operate between 600-1000°C, generating power from fluids like butane. Medium temperature plants use parabolic trough collectors and operate between 250-400°C. High temperature plants include dish collectors and central tower plants using heliostats, operating above 600°C to generate steam power. The document provides details on the systems and processes used in each type of solar thermal power plant.
Viewers also liked (20)
Industrial Mechanical Seal by Leak - End Engineers, Mumbai
Industrial Mechanical Seal by Leak - End Engineers, Mumbai
KPD ppt
- 1. 3 Units of Sales Gas Compressors with Zorya UGT6000i Mechanical Drive Gas Turbine All 3x Packages delivered in March 2015 to Oil & Gas Development Corporation Of Pakistan for the Kunar Gas Field Project DGS System On skid by Nebot FSD Including all Dry Gas Seals Core Engine from Zorya – UGT 6000i. Package by Harbin Guanghan Gas Turbine Design Institute 703. NEWJCM