This document is a parts catalog for a Hitachi wheel loader powered by a Cummins QSB6.7 engine. It contains a table of contents listing the major systems of the loader and their corresponding parts sections. These include the engine, powertrain, chassis, cab, electrical systems, hydraulics, brakes, and controls. Each part is assigned a unique identification number and name in the catalog for ordering purposes.
This document provides instructions for removing and installing fuel system components on a C32 Industrial Engine, including:
- The fuel priming pump, fuel filter base, fuel transfer pump, and various fuel lines. Detailed step-by-step removal and installation procedures are provided along with required tools and torque specifications.
- Best practices are outlined for properly installing non-metallic fuel lines, including using the correct hose length and routing, avoiding twists or kinks, and ensuring proper alignment of clips and grommets. Fuel lines should be inspected every 500 hours.
- Illustrations clearly show the components and proper alignment to allow sufficient clearance from other parts. Proper installation creates gentle bends that
Caterpillar cat 325 c excavator (prefix bkh) service repair manual (bkh00001 ...fjsekkdmme
The document provides instructions for removing and installing pistons, connecting rods, crankshaft main bearings, and the crankshaft in a 3126B engine. Key steps include cleaning parts to prevent contamination, applying anti-seize compound to connecting rod bolts, installing pistons and connecting rods with the proper orientation, checking crankshaft end play, and removing/installing components in the correct order.
This document provides removal and installation instructions for fuel system components on a C32 Industrial Engine BT4, including:
- The fuel priming pump, fuel filter base, fuel lines, fuel transfer pump, and fuel pressure regulator. Detailed steps and diagrams are given for safely removing each component and installing replacements.
- The exhaust cooler (NRS) is also covered, with a single step to drain the coolant before removal.
Safety precautions are provided, such as containing fluids and ensuring cleanliness when handling parts. Proper torque specifications are listed for reinstallation.
Caterpillar cat 321 d lcr excavator (prefix mdt) service repair manual (mdt00...ufdjjsekkmdme
This document provides instructions for removing and installing the fuel injection pump, fuel injection pump gear, and electronic unit injectors on a Caterpillar C6.4 engine. The removal process involves draining fluids, loosening bolts, disconnecting hoses and electrical connections. Installation is the reverse order, ensuring cleanliness and applying specified torques. Identification marks should be made for reinstallation of parts in the original locations.
Caterpillar cat 321 d lcr excavator (prefix txa) service repair manual (txa00...ufdjjsekkmdme
This document provides instructions for removing and installing fuel injection lines and other fuel system components on a Caterpillar 321D LCR excavator. The removal procedure includes disconnecting fuel lines, removing mounting hardware, and using protective tools and plugs to prevent fluid loss and contamination. Installation is the reverse of removal, including installing new fuel lines, fittings, and hoses, and verifying fuel system pressure is purged before startup.
This document provides removal and installation instructions for a turbocharger and exhaust manifold on a Caterpillar 216B2 skid steer loader. The procedure involves removing hoses, bolts, tubes, and gaskets and ensuring all mating surfaces are clean before installing the new parts with new gaskets and bolts, tightened to the specified torques. Valve spring removal and installation procedures are also outlined, requiring the use of special tools to compress the springs safely.
Caterpillar cat 438 b backhoe loader (prefix 3kk) service repair manual (3kk0...ufuusefjjsekkm
The document provides instructions for installing the front housing on a Caterpillar 3054 engine. It outlines 11 steps, which include installing a new gasket with sealant, bolting the housing to the cylinder block and oil pan, and ensuring proper alignment. Tools required are listed as Loctite gasket sealant. Proper torque specifications are provided for all bolted connections. The process concludes by installing the camshaft gear, front gear group, and oil pan.
Caterpillar cat 321 d lcr excavator (prefix pbd) service repair manual (pbd00...ufdjjsekkmdme
1. The document provides instructions for removing and installing fuel injection lines and other fuel system components on a Caterpillar 321D LCR excavator.
2. To remove the fuel injection pump, disconnect any attached lines and hoses after verifying that fuel pressure has been purged from the system. Clean all components thoroughly before removal to prevent contamination.
3. Several safety notices are provided to warn technicians of the dangers of high pressure fuel and ensure proper disposal of fluids.
This document provides instructions for removing and installing fuel system components on a C32 Industrial Engine, including:
- The fuel priming pump, fuel filter base, fuel transfer pump, and various fuel lines. Detailed step-by-step removal and installation procedures are provided along with required tools and torque specifications.
- Best practices are outlined for properly installing non-metallic fuel lines, including using the correct hose length and routing, avoiding twists or kinks, and ensuring proper alignment of clips and grommets. Fuel lines should be inspected every 500 hours.
- Illustrations clearly show the components and proper alignment to allow sufficient clearance from other parts. Proper installation creates gentle bends that
Caterpillar cat 325 c excavator (prefix bkh) service repair manual (bkh00001 ...fjsekkdmme
The document provides instructions for removing and installing pistons, connecting rods, crankshaft main bearings, and the crankshaft in a 3126B engine. Key steps include cleaning parts to prevent contamination, applying anti-seize compound to connecting rod bolts, installing pistons and connecting rods with the proper orientation, checking crankshaft end play, and removing/installing components in the correct order.
This document provides removal and installation instructions for fuel system components on a C32 Industrial Engine BT4, including:
- The fuel priming pump, fuel filter base, fuel lines, fuel transfer pump, and fuel pressure regulator. Detailed steps and diagrams are given for safely removing each component and installing replacements.
- The exhaust cooler (NRS) is also covered, with a single step to drain the coolant before removal.
Safety precautions are provided, such as containing fluids and ensuring cleanliness when handling parts. Proper torque specifications are listed for reinstallation.
Caterpillar cat 321 d lcr excavator (prefix mdt) service repair manual (mdt00...ufdjjsekkmdme
This document provides instructions for removing and installing the fuel injection pump, fuel injection pump gear, and electronic unit injectors on a Caterpillar C6.4 engine. The removal process involves draining fluids, loosening bolts, disconnecting hoses and electrical connections. Installation is the reverse order, ensuring cleanliness and applying specified torques. Identification marks should be made for reinstallation of parts in the original locations.
Caterpillar cat 321 d lcr excavator (prefix txa) service repair manual (txa00...ufdjjsekkmdme
This document provides instructions for removing and installing fuel injection lines and other fuel system components on a Caterpillar 321D LCR excavator. The removal procedure includes disconnecting fuel lines, removing mounting hardware, and using protective tools and plugs to prevent fluid loss and contamination. Installation is the reverse of removal, including installing new fuel lines, fittings, and hoses, and verifying fuel system pressure is purged before startup.
This document provides removal and installation instructions for a turbocharger and exhaust manifold on a Caterpillar 216B2 skid steer loader. The procedure involves removing hoses, bolts, tubes, and gaskets and ensuring all mating surfaces are clean before installing the new parts with new gaskets and bolts, tightened to the specified torques. Valve spring removal and installation procedures are also outlined, requiring the use of special tools to compress the springs safely.
Caterpillar cat 438 b backhoe loader (prefix 3kk) service repair manual (3kk0...ufuusefjjsekkm
The document provides instructions for installing the front housing on a Caterpillar 3054 engine. It outlines 11 steps, which include installing a new gasket with sealant, bolting the housing to the cylinder block and oil pan, and ensuring proper alignment. Tools required are listed as Loctite gasket sealant. Proper torque specifications are provided for all bolted connections. The process concludes by installing the camshaft gear, front gear group, and oil pan.
Caterpillar cat 321 d lcr excavator (prefix pbd) service repair manual (pbd00...ufdjjsekkmdme
1. The document provides instructions for removing and installing fuel injection lines and other fuel system components on a Caterpillar 321D LCR excavator.
2. To remove the fuel injection pump, disconnect any attached lines and hoses after verifying that fuel pressure has been purged from the system. Clean all components thoroughly before removal to prevent contamination.
3. Several safety notices are provided to warn technicians of the dangers of high pressure fuel and ensure proper disposal of fluids.
Caterpillar cat 216 b skid steer loader (prefix rll) service repair manual (r...uyydfhjjskkmd
This document provides instructions for installing the engine oil pump on a 216B skid steer loader. It describes:
1) Using an alignment tool to install the idler hub into the cylinder block.
2) Lubricating and installing various pump components like the inner rotor and idler gear.
3) Installing retaining rings and checking end play with a feeler gauge.
4) Reinstalling components like the oil strainer if removed previously.
Caterpillar cat 966 h wheel loader (prefix bs6) service repair manual (bs6000...fudjsjfekskkem
The document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar C11 engine. It describes:
1) Using a valve spring compressor tool to remove valve locks, springs, rotators, and valves.
2) Lubricating and installing new valves, seals, springs and locks using the compressor tool.
3) To begin, the cylinder head must be removed and cleaned of contaminants before starting the valve job.
Caterpillar cat 235 d excavator (prefix 8kj) service repair manual (8kj00001 ...uudfjjjskkemmd
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The removal procedure involves turning off the fuel supply, disconnecting tubes, and removing bolts to access the pump. The disassembly process describes removing springs, seals, sleeves, pistons, and other components from the pump housing. Safety notices are provided to keep parts clean and contain fluids during maintenance.
Caterpillar cat 323 f l excavator (prefix xcf) service repair manual (xcf0000...fusjejkdkmse
This document provides instructions for removing and installing crankshaft main bearings on a Caterpillar C7.1 engine. The procedure involves removing the main bearing caps and shells one pair at a time, keeping each cap and shell together. Thrust washers must be removed from number six main bearing using a crankshaft turning tool. New shells are cleaned and lubricated before installation. Main bearing caps are torqued to specification and end play is checked after installation is complete. A separate section provides instructions for removing the entire crankshaft, which requires first removing other engine components like the oil pump, front housing, rear seal, cylinder head, pistons and connecting rods.
Caterpillar cat 336 f l excavator (prefix tje) service repair manual (tje0000...fjkskedmme
The document provides instructions for disassembling the travel motor of a 336F excavator. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Detailed illustrations accompany each step to show how to properly remove each component. Safety precautions are provided to warn of potential spring forces and ensure protective equipment is worn during disassembly.
This document provides instructions for removing and installing components on a Caterpillar 3034 engine, including:
- Removing the fuel injection pump by disconnecting linkages, removing mounting bolts and shims, and ensuring dowels and pins are not damaged.
- Installing the fuel injection pump by cleaning surfaces, positioning shims, aligning dowels and pins, and tightening mounting bolts.
- Removing the turbocharger by disconnecting hoses, removing mounting nuts and bolts, and removing it and the gasket.
- Installing the turbocharger by positioning the gasket and turbocharger, tightening mounting nuts, and reconnecting hoses.
- Removing the exhaust manifold
Caterpillar cat 432 d backhoe loader (prefix wep) service repair manual (wep0...ujfdjjskkemme
This document provides instructions for removing and installing the engine oil cooler and water pump on a Caterpillar 3054C engine. The procedures describe draining fluids, removing mounting hardware, and installing new seals and gaskets. Safety notices are included to wear protective equipment and contain fluids during disassembly and reassembly.
Caterpillar cat 422 e backhoe loader (prefix maw) service repair manual (maw0...ufjjsjekkmdme
This service repair manual provides instructions for repairing and replacing components of the fuel system for a 422E Backhoe Loader powered by a C4.4 engine, including:
- Removing and installing the fuel priming pump and fuel filter base.
- Removing and installing the fuel injection lines.
- Removing the fuel injection nozzles.
- Installing the fuel injection nozzles.
- Removing the Delphi DP210 fuel injection pump.
The document provides detailed step-by-step instructions and illustrations for completing each repair or replacement, with notes about required tools and safety precautions. Removal and installation procedures for each component are presented separately.
Caterpillar cat 428 c backhoe loader (prefix 2cr) service repair manual (2cr0...uuudfjjfjkkskm
This document provides instructions for removing and installing fuel injection nozzles and fuel injection pumps on a Caterpillar 3054 engine. The instructions include removing fuel lines, loosening nuts, removing nozzles and pumps, cleaning parts, and installing nozzles and pumps following specific tightening procedures and torque specifications. Safety notices are also provided to keep parts clean and contain fluids properly during the repair process.
Caterpillar cat 321 c excavator (prefix dax) service repair manual (dax00001 ...ufjjskekkmde
This document provides instructions for removing and installing various engine components on a Caterpillar 321C EXCAVATOR, including the engine oil filter base, engine oil cooler, and engine oil relief valve. The procedures describe using specific tools to remove parts like bolts, filters, and bases. Safety notices are included to handle fluids properly and avoid contamination.
Caterpillar cat 434 e backhoe loader (prefix sef) service repair manual (sef0...ujdfjjkskkmmde
The document provides instructions to remove the engine oil pump from a Caterpillar C4.4 engine. It describes draining the engine oil first. Then it details removing the oil pan, oil pump housing cap, relief valve spring and plunger using a magnetic tool. Proper safety precautions are noted due to the spring force.
The document provides instructions for removing and installing several fuel system components on a 225 excavator including:
- The fuel priming pump, including disconnecting lines and removing mounting bolts.
- The fuel filter base, involving removing bolts, lines, and filters.
- The fuel transfer pump, which has steps for removing mounting bolts and lines.
This document is a parts catalog for a 30ZV-2 wheel loader powered by a Kubota D1803-M-D1-E3B-WLTC1 engine. It lists parts for equipment components and provides part numbers, part names, quantities, and serial numbers applicable to each part. The parts are grouped into categories including the HST pump assembly, piston pump assembly, axle assemblies, differentials, final drives, and cylinders.
This document is a parts catalog for a 30ZV-2 wheel loader powered by a Kubota D1803-M-D1-E3B-WLTC1 engine. It lists parts for equipment components, pumps, motors, controls, cylinders, differentials, final drives, propeller shafts, and other parts. The parts are organized by assembly, item number, part number, name, quantity, and serial number range. Notes provide information on applicable models and replacing parts.
This document is a parts catalog for a wheel loader powered by a Kubota D1803-M-D1-E3B-WLTC1 engine. It contains lists of parts for components like the HST pump assembly, piston pump assembly, rotary group, hydraulic control, and piston complete. Each part listing includes the part name, number, quantity, and applicable serial number range.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine, including:
- Fuel priming pump
- Fuel filter base
- Fuel lines
- Fuel transfer pump
- Fuel pressure regulator
- Exhaust cooler
The procedures describe disconnecting fuel lines and electrical connections, removing mounting hardware, and installing components in reverse order, noting specific torque specifications for fasteners. Safety precautions are provided for containing fluids and releasing spring pressure.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine, including:
- Fuel priming pump
- Fuel filter base
- Fuel lines
- Fuel transfer pump
- Fuel pressure regulator
- Exhaust cooler
The procedures describe disconnecting fuel lines and electrical connections, removing mounting hardware, and installing components in reverse order, noting specific torque specifications for fasteners. Safety precautions are provided for containing fluids and releasing spring pressure.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine, including:
- Fuel priming pump
- Fuel filter base
- Fuel lines
- Fuel transfer pump
- Fuel pressure regulator
- Exhaust cooler
The procedures describe disconnecting fuel lines and electrical connections, removing mounting hardware, and installing components in reverse order, noting specific torque specifications for fasteners. Safety precautions are provided for containing fluids and releasing spring pressure.
This document provides instructions for removing and installing various fuel system components on a C32 Industrial Engine, including:
- The fuel priming pump, fuel filter base, fuel lines, and fuel transfer pump. Detailed step-by-step removal and installation procedures are provided along with required tools. Best practices are outlined for properly installing nonmetallic fuel lines.
This document provides instructions for removing and installing various fuel system components on a C32 Industrial Engine, including:
- The fuel priming pump, fuel filter base, fuel lines, and fuel transfer pump. Detailed step-by-step removal and installation procedures are provided along with required tools. Best practices are outlined for properly installing nonmetallic fuel lines.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine, including:
- Fuel priming pump
- Fuel filter base
- Fuel lines
- Fuel transfer pump
- Fuel pressure regulator
- Exhaust cooler
The procedures describe disconnecting fuel lines and electrical connections, removing mounting hardware, and installing components in reverse order, noting specific torque specifications for fasteners. Safety precautions are provided for containing fluids and releasing spring pressure.
This document provides instructions for removing and installing various fuel system components on a C32 Industrial Engine, including:
- The fuel priming pump, fuel filter base, fuel lines, and fuel transfer pump. Detailed step-by-step removal and installation procedures are provided along with required tools. Best practices are outlined for properly installing nonmetallic fuel lines.
Caterpillar cat 216 b skid steer loader (prefix rll) service repair manual (r...uyydfhjjskkmd
This document provides instructions for installing the engine oil pump on a 216B skid steer loader. It describes:
1) Using an alignment tool to install the idler hub into the cylinder block.
2) Lubricating and installing various pump components like the inner rotor and idler gear.
3) Installing retaining rings and checking end play with a feeler gauge.
4) Reinstalling components like the oil strainer if removed previously.
Caterpillar cat 966 h wheel loader (prefix bs6) service repair manual (bs6000...fudjsjfekskkem
The document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar C11 engine. It describes:
1) Using a valve spring compressor tool to remove valve locks, springs, rotators, and valves.
2) Lubricating and installing new valves, seals, springs and locks using the compressor tool.
3) To begin, the cylinder head must be removed and cleaned of contaminants before starting the valve job.
Caterpillar cat 235 d excavator (prefix 8kj) service repair manual (8kj00001 ...uudfjjjskkemmd
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The removal procedure involves turning off the fuel supply, disconnecting tubes, and removing bolts to access the pump. The disassembly process describes removing springs, seals, sleeves, pistons, and other components from the pump housing. Safety notices are provided to keep parts clean and contain fluids during maintenance.
Caterpillar cat 323 f l excavator (prefix xcf) service repair manual (xcf0000...fusjejkdkmse
This document provides instructions for removing and installing crankshaft main bearings on a Caterpillar C7.1 engine. The procedure involves removing the main bearing caps and shells one pair at a time, keeping each cap and shell together. Thrust washers must be removed from number six main bearing using a crankshaft turning tool. New shells are cleaned and lubricated before installation. Main bearing caps are torqued to specification and end play is checked after installation is complete. A separate section provides instructions for removing the entire crankshaft, which requires first removing other engine components like the oil pump, front housing, rear seal, cylinder head, pistons and connecting rods.
Caterpillar cat 336 f l excavator (prefix tje) service repair manual (tje0000...fjkskedmme
The document provides instructions for disassembling the travel motor of a 336F excavator. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Detailed illustrations accompany each step to show how to properly remove each component. Safety precautions are provided to warn of potential spring forces and ensure protective equipment is worn during disassembly.
This document provides instructions for removing and installing components on a Caterpillar 3034 engine, including:
- Removing the fuel injection pump by disconnecting linkages, removing mounting bolts and shims, and ensuring dowels and pins are not damaged.
- Installing the fuel injection pump by cleaning surfaces, positioning shims, aligning dowels and pins, and tightening mounting bolts.
- Removing the turbocharger by disconnecting hoses, removing mounting nuts and bolts, and removing it and the gasket.
- Installing the turbocharger by positioning the gasket and turbocharger, tightening mounting nuts, and reconnecting hoses.
- Removing the exhaust manifold
Caterpillar cat 432 d backhoe loader (prefix wep) service repair manual (wep0...ujfdjjskkemme
This document provides instructions for removing and installing the engine oil cooler and water pump on a Caterpillar 3054C engine. The procedures describe draining fluids, removing mounting hardware, and installing new seals and gaskets. Safety notices are included to wear protective equipment and contain fluids during disassembly and reassembly.
Caterpillar cat 422 e backhoe loader (prefix maw) service repair manual (maw0...ufjjsjekkmdme
This service repair manual provides instructions for repairing and replacing components of the fuel system for a 422E Backhoe Loader powered by a C4.4 engine, including:
- Removing and installing the fuel priming pump and fuel filter base.
- Removing and installing the fuel injection lines.
- Removing the fuel injection nozzles.
- Installing the fuel injection nozzles.
- Removing the Delphi DP210 fuel injection pump.
The document provides detailed step-by-step instructions and illustrations for completing each repair or replacement, with notes about required tools and safety precautions. Removal and installation procedures for each component are presented separately.
Caterpillar cat 428 c backhoe loader (prefix 2cr) service repair manual (2cr0...uuudfjjfjkkskm
This document provides instructions for removing and installing fuel injection nozzles and fuel injection pumps on a Caterpillar 3054 engine. The instructions include removing fuel lines, loosening nuts, removing nozzles and pumps, cleaning parts, and installing nozzles and pumps following specific tightening procedures and torque specifications. Safety notices are also provided to keep parts clean and contain fluids properly during the repair process.
Caterpillar cat 321 c excavator (prefix dax) service repair manual (dax00001 ...ufjjskekkmde
This document provides instructions for removing and installing various engine components on a Caterpillar 321C EXCAVATOR, including the engine oil filter base, engine oil cooler, and engine oil relief valve. The procedures describe using specific tools to remove parts like bolts, filters, and bases. Safety notices are included to handle fluids properly and avoid contamination.
Caterpillar cat 434 e backhoe loader (prefix sef) service repair manual (sef0...ujdfjjkskkmmde
The document provides instructions to remove the engine oil pump from a Caterpillar C4.4 engine. It describes draining the engine oil first. Then it details removing the oil pan, oil pump housing cap, relief valve spring and plunger using a magnetic tool. Proper safety precautions are noted due to the spring force.
The document provides instructions for removing and installing several fuel system components on a 225 excavator including:
- The fuel priming pump, including disconnecting lines and removing mounting bolts.
- The fuel filter base, involving removing bolts, lines, and filters.
- The fuel transfer pump, which has steps for removing mounting bolts and lines.
This document is a parts catalog for a 30ZV-2 wheel loader powered by a Kubota D1803-M-D1-E3B-WLTC1 engine. It lists parts for equipment components and provides part numbers, part names, quantities, and serial numbers applicable to each part. The parts are grouped into categories including the HST pump assembly, piston pump assembly, axle assemblies, differentials, final drives, and cylinders.
This document is a parts catalog for a 30ZV-2 wheel loader powered by a Kubota D1803-M-D1-E3B-WLTC1 engine. It lists parts for equipment components, pumps, motors, controls, cylinders, differentials, final drives, propeller shafts, and other parts. The parts are organized by assembly, item number, part number, name, quantity, and serial number range. Notes provide information on applicable models and replacing parts.
This document is a parts catalog for a wheel loader powered by a Kubota D1803-M-D1-E3B-WLTC1 engine. It contains lists of parts for components like the HST pump assembly, piston pump assembly, rotary group, hydraulic control, and piston complete. Each part listing includes the part name, number, quantity, and applicable serial number range.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine, including:
- Fuel priming pump
- Fuel filter base
- Fuel lines
- Fuel transfer pump
- Fuel pressure regulator
- Exhaust cooler
The procedures describe disconnecting fuel lines and electrical connections, removing mounting hardware, and installing components in reverse order, noting specific torque specifications for fasteners. Safety precautions are provided for containing fluids and releasing spring pressure.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine, including:
- Fuel priming pump
- Fuel filter base
- Fuel lines
- Fuel transfer pump
- Fuel pressure regulator
- Exhaust cooler
The procedures describe disconnecting fuel lines and electrical connections, removing mounting hardware, and installing components in reverse order, noting specific torque specifications for fasteners. Safety precautions are provided for containing fluids and releasing spring pressure.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine, including:
- Fuel priming pump
- Fuel filter base
- Fuel lines
- Fuel transfer pump
- Fuel pressure regulator
- Exhaust cooler
The procedures describe disconnecting fuel lines and electrical connections, removing mounting hardware, and installing components in reverse order, noting specific torque specifications for fasteners. Safety precautions are provided for containing fluids and releasing spring pressure.
This document provides instructions for removing and installing various fuel system components on a C32 Industrial Engine, including:
- The fuel priming pump, fuel filter base, fuel lines, and fuel transfer pump. Detailed step-by-step removal and installation procedures are provided along with required tools. Best practices are outlined for properly installing nonmetallic fuel lines.
This document provides instructions for removing and installing various fuel system components on a C32 Industrial Engine, including:
- The fuel priming pump, fuel filter base, fuel lines, and fuel transfer pump. Detailed step-by-step removal and installation procedures are provided along with required tools. Best practices are outlined for properly installing nonmetallic fuel lines.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine, including:
- Fuel priming pump
- Fuel filter base
- Fuel lines
- Fuel transfer pump
- Fuel pressure regulator
- Exhaust cooler
The procedures describe disconnecting fuel lines and electrical connections, removing mounting hardware, and installing components in reverse order, noting specific torque specifications for fasteners. Safety precautions are provided for containing fluids and releasing spring pressure.
This document provides instructions for removing and installing various fuel system components on a C32 Industrial Engine, including:
- The fuel priming pump, fuel filter base, fuel lines, and fuel transfer pump. Detailed step-by-step removal and installation procedures are provided along with required tools. Best practices are outlined for properly installing nonmetallic fuel lines.
This document provides removal and installation instructions for fuel system components on a C32 Industrial Engine, including:
- Fuel priming pump
- Fuel filter base
- Fuel lines
- Fuel transfer pump
- Fuel pressure regulator
- Exhaust cooler
The instructions include lists of required tools and step-by-step procedures for removing and installing each component, with torque specifications and other details provided.
This document provides instructions for removing and installing fuel system components on a C32 Industrial Engine, including:
- The fuel priming pump, fuel filter base, fuel transfer pump, and various fuel lines. Detailed steps are provided for disconnecting fuel lines and electrical connections, loosening mounting hardware, and removing individual components.
- Reinstallation follows the removal process in reverse, taking care to properly tighten all connections in accordance with specified torque values. Proper alignment and routing of fuel lines is emphasized to avoid contact with other parts.
- Best practices are outlined for installing non-metallic fuel lines, such as using the correct length and bending radius, and ensuring proper alignment of clips and grommets.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine BT4, including:
- The fuel priming pump, fuel filter base, fuel lines, fuel transfer pump, and fuel pressure regulator.
- Detailed steps are given for each component's removal and installation, including required tools. Safety precautions are provided, such as containing fluids and ensuring fuel system is shut off.
- Photographs and illustrations supplement the text instructions. Torque specifications are given for reinstallation.
This document provides instructions for removing and installing various fuel system components on a C32 Industrial Engine BT4, including:
- The fuel priming pump, which involves disconnecting fuel lines and removing bolts.
- The fuel filter base, which requires disconnecting harness assemblies, hoses, and removing bolts to access sensors.
- Nonmetallic fuel lines, with details on marking, removing, and installing lines according to best practices like using proper length and avoiding contact with other parts.
- The fuel transfer pump, which involves disconnecting fittings and hoses then removing bolts and seals.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine BT4, including:
- The fuel priming pump, fuel filter base, fuel lines, fuel transfer pump, and fuel pressure regulator.
- Detailed steps are given for each component's removal and installation, including required tools. Safety precautions are provided, such as containing fluids and ensuring fuel system is shut off.
- Illustrations supplement the text instructions to clarify part locations and orientations. Torque specifications are listed for secure installation of components.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine BT4, including:
- The fuel priming pump, fuel filter base, fuel lines, fuel transfer pump, and fuel pressure regulator.
- Detailed steps are given for each component's removal and installation, including required tools. Safety precautions are provided, such as containing fluids and ensuring fuel system is shut off.
- Illustrations supplement the text instructions to clarify part locations and orientations. Torque specifications are listed for secure installation of components.
This document provides instructions for removing and installing various fuel system components on a C32 Industrial Engine BT4, including:
- The fuel priming pump by disconnecting fuel lines, removing bolts, and using a strap wrench.
- The fuel filter base by disconnecting harnesses and hoses, removing bolts, and removing sensors.
- Nonmetallic fuel lines by marking, removing, and reinstalling lines using proper techniques to prevent damage.
- The fuel transfer pump by disconnecting fittings and hoses, removing bolts, and removing the O-ring seal.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C32 Industrial Engine BT4, including:
- The fuel priming pump, fuel filter base, fuel lines, fuel transfer pump, and fuel pressure regulator.
- Detailed steps are given for each component's removal and installation, including required tools. Safety precautions are provided, such as containing fluids and ensuring fuel system is shut off.
- Illustrations supplement the text instructions to show part locations and orientations. Torque specifications are listed for reinstallation.
This document provides instructions for removing and installing various fuel system components on a C32 Industrial Engine BT4, including:
- The fuel priming pump, which involves disconnecting fuel lines and removing bolts.
- The fuel filter base, which requires disconnecting harness assemblies, hoses, and removing bolts to access sensors.
- Nonmetallic fuel lines, with details on marking, removing, and installing lines, using the proper hose length and avoiding contact with other parts.
This document provides removal and installation instructions for fuel system components on a C32 Industrial Engine BT4, including:
- The fuel priming pump, fuel filter base, fuel lines, fuel transfer pump, and fuel pressure regulator. Detailed steps and diagrams are given for safely removing each component and installing replacements.
- The exhaust cooler (NRS) is also covered, with a single step to drain the coolant before removal.
Safety precautions are provided, such as containing fluids and ensuring cleanliness when handling parts. Proper torque specifications are listed for reinstallation.
Similar to Kawasaki 80 z6 wheel loader parts catalogue manual (serial no. 80c7 0101 and up) (20)
Kawasaki 70 z7b wheel loader service repair manual (serial no. 70c6 5001 and up)hhfjksekmm
This document provides disassembly and assembly instructions for removing and installing the cab on a wheel loader. It outlines 14 steps including draining fluids, releasing pressures, removing bolts and covers. Precautions are provided regarding escaping fluids, capping open lines, and ensuring pressures are released from the hydraulic and other systems. The document contains diagrams illustrating the specific components and their locations.
Caterpillar cat 325 l excavator (prefix 7lm) service repair manual (7lm00001 ...hhfjksekmm
This document provides instructions for disassembling the travel motor on 325, 325B, and 325L excavators. It describes 24 steps to fully disassemble the travel motor, including removing the head, brake piston, barrel assembly, shoe retainer, springs, and shaft. Special markings and care are required to keep components in their original positions for reassembly.
Caterpillar cat 325 a fm l excavator (prefix 7 lm) service repair manual (7lm...hhfjksekmm
This document provides instructions for disassembling a travel motor on 325, 325B and 325L excavators. It describes 24 steps to fully disassemble the travel motor, identifying each component and how to remove it. This includes removing the head, brake piston, barrel assembly, shoe retainer, springs and other internal components. Special tools may be required and precautions around containing fluids are noted. The process is similar between 325 and 325B excavator models, with some weight and bolt quantity differences called out.
Caterpillar cat 349 f excavator (prefix hlb) service repair manual (hlb00001 ...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor on 349F and 349F L excavators. It begins by listing the required tools and safety precautions. The disassembly process is then described in 32 steps and illustrated with diagrams, removing components like the motor head assembly, piston assembly, barrel assembly, swashplate, and shaft assembly. The assembly section provides specifications, lubrication and torque requirements for components, and illustrated assembly steps in reverse order.
Caterpillar cat 349 f excavator (prefix bz2) service repair manual (bz200001 ...hhfjksekmm
The document provides step-by-step instructions to disassemble a travel motor on a 349F and 349F L excavator. It describes 27 steps to remove components such as plugs, seals, springs, bearings, valves, and housing pieces. Various tools are required including lifting devices, bolts, nuts, and pullers to separate the motor head assembly, rotating group, and individual internal parts in a safe manner while taking precautions for any released spring forces.
Caterpillar cat 349 e l vg excavator (prefix etc) service repair manual (etc0...hhfjksekmm
The document provides instructions for removing and installing various engine components on a Caterpillar 349E L excavator, including:
1) Removing and installing electronic unit injector sleeves, which requires using specialized tools to pull the sleeves from the cylinder head and reinstall them with new O-rings.
2) Procedures for removing and installing the air cleaner housing, turbocharger, exhaust balance solenoid valve, and exhaust sensor lines.
3) Detailed illustrations and torque specifications are provided for correctly performing each removal and installation step. Proper cleaning and use of new sealing components is emphasized.
Caterpillar cat 349 e l vg excavator (prefix kfx) service repair manual (kfx0...hhfjksekmm
The document provides instructions for disassembling and assembling a travel motor on a 349E L VG excavator. It includes 27 steps for disassembly and 18 steps for assembly. Key parts that are removed and installed include the head assembly, brake housing, rotating group, barrel assembly, pistons, bearings and seals. Tools and torque specifications are provided for correct disassembly and reassembly.
Caterpillar cat 349 e l excavator (prefix whz) service repair manual (whz0000...hhfjksekmm
The document provides instructions to disassemble and assemble the final drive on a 349E excavator. It describes 33 steps to disassemble the final drive by removing components like the cover, ring gear, carrier assembly, planetary gears, and seals. It then describes the assembly process, providing specifications for torque and installation of components like bolts, bearings, seals, and shims. Proper cleaning and use of locking compounds or lubricants is emphasized to ensure correct assembly.
Caterpillar cat 349 e l excavator (prefix tfg) service repair manual (tfg0000...hhfjksekmm
1) The document provides step-by-step instructions for disassembling and assembling the hydraulic fan drive of a 349E L excavator.
2) The disassembly process involves removing over 20 components including bolts, seals, retainers, discs, and housing assemblies.
3) Assembly is the reverse of disassembly, requiring pressing or installing components like bearings, seals, sleeves and housings back into place and securing with bolts, pins or retaining rings. Cleanliness and use of specified tools and adhesives is important for successful reassembly.
Caterpillar cat 349 e l excavator (prefix spg) service repair manual (spg0000...hhfjksekmm
The document provides instructions for disassembling and assembling the travel motor of a 349E excavator. It includes 27 steps for disassembly, removing components like seals, springs, bearings, and housing pieces. The assembly section has 13 steps and specifies torques and lubricants for reinstalling components in reverse order, like installing seals, pins, bearings onto the shaft assembly before pressing it into the motor housing. Tolerances and specifications are provided for components like springs, seals, and fasteners.
Caterpillar cat 349 e l excavator (prefix rgh) service repair manual (rgh0000...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor on 349E and 349E L excavator models. The disassembly process involves 27 steps to remove components from the motor housing, head assembly, rotating group, and barrel assembly. The assembly process describes 13 steps and specifications to reinstall components in the reverse order, ensuring proper torque values and lubrication of parts. Key components include the motor housing, head assembly, shaft assembly, barrel assembly, pistons, bearings, seals, springs, and related hardware.
Caterpillar cat 349 e l excavator (prefix mzw) service repair manual (mzw0000...hhfjksekmm
This document provides assembly instructions for a 349E L excavator final drive group. It includes specifications for the components and a step-by-step procedure for assembling the final drive. Some key steps include applying anti-seize compound to bearings, using shims to adjust clearances, and torquing bolts to the specified values. Tools required include a transmission repair stand, eyebolts, and torque wrenches. The assembly procedure has 30 steps and ensures the final drive is properly assembled and adjusted.
Caterpillar cat 349 e l excavator (prefix mpz) service repair manual (mpz0000...hhfjksekmm
This document provides instructions for removing and installing a water pump on a 349E L excavator. The removal procedure involves: 1) Removing the water temperature regulator and fan drive; 2) Removing various sheet assemblies and supports; 3) Disconnecting support assemblies and repositioning harness assemblies; 4) Removing hoses. The installation procedure involves reversing the removal steps and applying threadlock to bolts.
Caterpillar cat 349 e l excavator (prefix kfx) service repair manual (kfx0000...hhfjksekmm
The document provides instructions for disassembling and assembling a travel motor on a 349E L VG excavator. It includes 27 steps for disassembly and 18 steps for assembly. Key parts that are removed and installed include the head assembly, brake housing, rotating group, barrel assembly, pistons, bearings and seals. Tools and torque specifications are provided for correct disassembly and reassembly.
Caterpillar cat 349 e l excavator (prefix fjb) service repair manual (fjb0000...hhfjksekmm
The document provides instructions for disassembling and assembling a hydraulic fan drive for a 349E excavator. It describes 22 steps to disassemble the components, including removing bolts, retainers, seals, discs, and housing parts. It then describes 14 steps for reassembling the components, applying sealant and installing seals, sleeves, bearings and housing pieces in the reverse order of disassembly. Precision cleaning and special tools are required to prevent damage to parts during the process.
Caterpillar cat 349 e l excavator (prefix etc) service repair manual (etc0000...hhfjksekmm
The document provides instructions for removing and installing various engine components on a Caterpillar 349E L excavator, including:
1) Removing and installing electronic unit injector sleeves, which requires using specialized tools to pull the sleeves from the cylinder head and clean the bore before reinstalling with new O-rings.
2) Procedures for removing and installing the air cleaner housing, turbocharger, exhaust balance solenoid valve, and exhaust sensor lines.
3) Detailed illustrations and torque specifications are provided for correctly performing each removal and installation step.
Caterpillar cat 349 e excavator (prefix whz) service repair manual (whz00001 ...hhfjksekmm
The document provides instructions to disassemble and assemble the final drive on a 349E excavator. It describes 33 steps to disassemble the final drive by removing components like the coupling, cover, ring gear, carrier assembly, planetary gears, and seals. It then describes the assembly process in reverse, providing specifications for torque and application of sealants or lubricants during reassembly. Precise alignment and orientation of parts is emphasized to ensure proper reassembly.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Globalfleet - global fleet survey 2021 full results
Kawasaki 80 z6 wheel loader parts catalogue manual (serial no. 80c7 0101 and up)
1. 93309-00572
Powered by CUMMINS QSB6.7 Engine
Serial No. 80C7-0101 ~
8
0
Z
6
(
C
U
M
M
I
N
S
Q
S
B
6
.
7
)
9
3
3
0
9
-
0
0
5
7
2
WHEEL LOADER
PARTS CATALOG
80Z6
April 2019
Printed in Japan
Ⓒ2019 Hitachi Construction Machinery Co., Ltd. All rights reserved.
2
F
O
R
T
U
R
K
E
Y
3. 0101 80C7-0101 80C7-0101
Chassis No. and Manufacturer's Serial No.
1. The chassis No. and the manufacturer's serial No. marked on the machine are indicated in this parts
catalog as follows:
Serial No. shown in parts
catalog
Chassis No. Manufacturer's serial No.
4. ・
1
(1)
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
・
PRE CREANER (SY-KLONE) ...............................................................................................................................................
POWERTRAIN
EXHAUST DEVICE (1) ............................................................................................................................................................
EXHAUST DEVICE (2) ............................................................................................................................................................
AIR INTAKE DEVICE ...............................................................................................................................................................
RAIN CAP .....................................................................................................................................................................................
PRE CREANER ..........................................................................................................................................................................
FAN PIPING (3)(REVERSE) ..................................................................................................................................................
FAN MOTOR ...............................................................................................................................................................................
FAN MOTOR (REVERSE) ......................................................................................................................................................
FUEL TANK .................................................................................................................................................................................
FUEL PIPING ..............................................................................................................................................................................
RADIATOR PIPING ...................................................................................................................................................................
FAN PUMP ...................................................................................................................................................................................
FAN PIPING (1) ..........................................................................................................................................................................
FAN PIPING (2) ..........................................................................................................................................................................
FAN PIPING (3) ..........................................................................................................................................................................
COOLING DEVICE (1) .............................................................................................................................................................
COOLING DEVICE (2) .............................................................................................................................................................
COOLING DEVICE (3) .............................................................................................................................................................
COOLING DEVICE PARTS ...................................................................................................................................................
COOLING COVER ....................................................................................................................................................................
・80Z6
ENGINE
ENGINE ..........................................................................................................................................................................................
ENGINE ..........................................................................................................................................................................................
ENGINE PARTS .........................................................................................................................................................................
CONTENTS I
・Before Use
・Chassis No. and Manufacturer's Serial No.
・CONTENTS II
・PARTS NAME INDEX
5. 47
49
51
53
55
57
59
61
(61)
63
65
67
71
73
・
75
77
79
81
83
85
87
89
91
93
95
97
99
101
103
105
107
109
111
113
115
117
FLOOR BOARD (1) ..................................................................................................................................................................
* TOOL BOX ..............................................................................................................................................................................
FLOOR BOARD (2) ..................................................................................................................................................................
* BATTERY BOX (L) ...............................................................................................................................................................
SIDE PANEL (1) .........................................................................................................................................................................
SIDE PANEL (2) .........................................................................................................................................................................
SIDE PANEL (3) .........................................................................................................................................................................
GAS SPRING ..............................................................................................................................................................................
FENDER ........................................................................................................................................................................................
COUNTER WEIGHT SUPPORT ...........................................................................................................................................
ENGINE COVER ........................................................................................................................................................................
RADIATOR COVER ..................................................................................................................................................................
REAR GRILL ................................................................................................................................................................................
GAS SPRING (REAR GRILL) ................................................................................................................................................
FRAME PARTS (2) ...................................................................................................................................................................
UNDER GUARD (FRONT) ......................................................................................................................................................
UNDER GUARD (REAR) .......................................................................................................................................................
COUNTER WEIGHT (1.93T) ..................................................................................................................................................
COUNTER WEIGHT (2.27T) ..................................................................................................................................................
RADIAL TIRE ..............................................................................................................................................................................
CHASSIS
FRONT FRAME (WITH LIFTING LUG) ..............................................................................................................................
REAR FRAME (WITH LIFTING LUG) .................................................................................................................................
FRAME PARTS (1) ...................................................................................................................................................................
OSCILLATION STOPPER (10 DEG.) ................................................................................................................................
TIRE SUPPORT .........................................................................................................................................................................
BIAS TIRE (COMMON TO L, R)(TRIANGLE) .................................................................................................................
BIAS TIRE (COMMON TO L, R) ..........................................................................................................................................
RADIAL TIRE (COMMON TO L, R) ....................................................................................................................................
PROPELLER SHAFT ...............................................................................................................................................................
FRONT AXLE ..............................................................................................................................................................................
REAR AXLE .................................................................................................................................................................................
AXLE PARTS ..............................................................................................................................................................................
OSCILLATION STOPPER (12 DEG.) ................................................................................................................................
TRANSMISSION ........................................................................................................................................................................
TRANSMISSION ........................................................................................................................................................................
TRANSMISSION PIPING ........................................................................................................................................................
6. 119
121
123
125
127
129
131
・
133
135
137
139
141
143
145
147
(133)
(135)
(137)
(139)
(141)
(143)
(145)
(147)
149
151
153
155
157
159
161
163
165
167
169
171
173
FLOOR (ROPS) ..........................................................................................................................................................................
REAR CONSOLE (2) ................................................................................................................................................................
RADIO ............................................................................................................................................................................................
WITHOUT RADIO PARTS ......................................................................................................................................................
CAB MIRROR .............................................................................................................................................................................
FLOOR ..........................................................................................................................................................................................
COVER (MAT) ............................................................................................................................................................................
FRONT CONSOLE (1) .............................................................................................................................................................
FRONT CONSOLE (2) .............................................................................................................................................................
FLOOR PARTS (REAR CONSOLE) ..................................................................................................................................
REAR CONSOLE (1) ................................................................................................................................................................
* CAB (5) ......................................................................................................................................................................................
* DOOR (R) .................................................................................................................................................................................
* DOOR (L) ..................................................................................................................................................................................
CAB GROUP ...............................................................................................................................................................................
CAB GROUP (ROPS) ..............................................................................................................................................................
CAB ................................................................................................................................................................................................
* CAB (1) ......................................................................................................................................................................................
* CAB (2) ......................................................................................................................................................................................
* CAB (3) ......................................................................................................................................................................................
* CAB (4) ......................................................................................................................................................................................
* CAB (3) ......................................................................................................................................................................................
* CAB (4) ......................................................................................................................................................................................
* CAB (5) ......................................................................................................................................................................................
* DOOR (R) .................................................................................................................................................................................
* DOOR (L) ..................................................................................................................................................................................
WITHOUT REAR UNDER MIRROR PARTS ....................................................................................................................
CAB
CAB (ROPS) ...............................................................................................................................................................................
* CAB (1) ......................................................................................................................................................................................
* CAB (2) ......................................................................................................................................................................................
FLOOR BOARD (3)(WITH AC) .............................................................................................................................................
FLOOR BOARD (3)(WITHOUT AC) ...................................................................................................................................
MUD GUARD ...............................................................................................................................................................................
FRONT FRAME COVER .........................................................................................................................................................
REAR UNDER MIRROR ..........................................................................................................................................................
* BATTERY BOX (R) ...............................................................................................................................................................
7. 175
177
179
181
183
185
187
189
191
193
195
197
199
201
203
205
207
209
211
213
217
219
221
223
225
227
229
・
231
233
235
237
239
241
243
245
247
ELECTRIC PARTS (REAR)(1) ..............................................................................................................................................
ELECTRIC PARTS (REAR)(2)(CAB) .................................................................................................................................
ELECTRIC PARTS (REAR)(2)(CAB) .................................................................................................................................
LIFT ARM AUTO LEVELER SYSTEM ..............................................................................................................................
BUCKET AUTO LEVELER ....................................................................................................................................................
LIFT ARM KICK OUT SYSTEM ...........................................................................................................................................
HORN .............................................................................................................................................................................................
HEAD LIGHT ...............................................................................................................................................................................
HEATER MIRROR .....................................................................................................................................................................
ANTENNA .....................................................................................................................................................................................
CONTROLLER (SATELLITE COMMUNICATIONS) ....................................................................................................
ELECTRICAL SYSTEM
ELECTRIC PARTS (FRONT) ................................................................................................................................................
AIR CONDITIONER (2) ...........................................................................................................................................................
* CONDENSER ..........................................................................................................................................................................
AIR-CONDITIONER PARTS .................................................................................................................................................
CONTROLLER (AIR CONDITIONER) ................................................................................................................................
WATER TANK .............................................................................................................................................................................
DUCT (CAB)(1) ..........................................................................................................................................................................
DUCT (CAB)(2) ..........................................................................................................................................................................
DUCT (FILTER) ..........................................................................................................................................................................
AIR CONDITIONER (1) ...........................................................................................................................................................
* AIR CONDITIONER UNIT ...................................................................................................................................................
AIR SUSPENSION SEAT PARTS (WITH HEATER)(GRAMMER) ...........................................................................
* AIR SUSPENSION SEAT (WITH HEATER)(GRAMMER)(1/2) .............................................................................
* AIR SUSPENSION SEAT (WITH HEATER)(GRAMMER)(2/2) .............................................................................
HEAD REST (GRAMMER) ......................................................................................................................................................
SEAT BELT (GRAMMER) ......................................................................................................................................................
STEERING WHEEL ...................................................................................................................................................................
SEAT BASE .................................................................................................................................................................................
SUSPENSION SEAT PARTS (KAB) ..................................................................................................................................
* SUSPENSION SEAT (KAB) ...............................................................................................................................................
HEAD REST (KAB) ...................................................................................................................................................................
RIGHT CONSOLE (1) ..............................................................................................................................................................
RIGHT CONSOLE (2) ..............................................................................................................................................................
WITHOUT RIGHT CONSOLE SLIDER PARTS ..............................................................................................................
STEERING COLUMN ...............................................................................................................................................................
8. 249
251
253
255
257
259
261
263
265
267
269
271
273
275
277
279
281
283
285
287
289
291
293
295
297
299
301
303
305
307
309
311
313
315
317
319
321
323
325
REAR HEAD LAMP (CAB) ....................................................................................................................................................
ELECTRIC PARTS (RADIO)(FLOOR) ...............................................................................................................................
CONTROLLER (SATELLITE COMMUNICATIONS) ....................................................................................................
12V POWER UNIT .....................................................................................................................................................................
WORK LIGHT (CAB FRONT)(1) ..........................................................................................................................................
WORK LIGHT (CAB FRONT)(2) ..........................................................................................................................................
WORK LIGHT HARNESS (CAB FRONT) .........................................................................................................................
ELECTRIC PARTS (WITH RIDE CONTROL) .................................................................................................................
START SWITCH ........................................................................................................................................................................
CONTROLLER (MC) ................................................................................................................................................................
CONTROLLER (TRANSMISSION) .....................................................................................................................................
CONTROLLER (MOBILE COMMUNICATIONS) ...........................................................................................................
ELECTRIC PARTS (STEERING COLUMN) ....................................................................................................................
ELECTRIC PARTS (MONITOR) ..........................................................................................................................................
ELECTRIC PARTS (FLOOR) ................................................................................................................................................
ELECTRIC PARTS (FAN HARNESS) ................................................................................................................................
ELECTRIC PARTS (RIGHT CONSOLE) ...........................................................................................................................
ELECTRIC PARTS (FRONT CONSOLE)(2-1) ..............................................................................................................
ELECTRIC PARTS (FRONT CONSOLE)(2-2) ..............................................................................................................
ELECTRIC PARTS (REAR CONSOLE)(1-1) ..................................................................................................................
ELECTRIC PARTS (REAR CONSOLE)(1-2) ..................................................................................................................
ELECTRIC PARTS (REAR CONSOLE)(2) .......................................................................................................................
REVERSE BUZZER (LOUD TYPE) ....................................................................................................................................
REVERSE BUZZER SWITCH ................................................................................................................................................
EMERGENCY STEERING PARTS (1) ...............................................................................................................................
EMERGENCY STEERING PARTS (2) ...............................................................................................................................
ELECTRIC PARTS (FRONT CONSOLE)(1) ...................................................................................................................
BATTERY .....................................................................................................................................................................................
REAR COMBINATION LAMP ...............................................................................................................................................
REAR COMBINATION LAMP BRACKET ........................................................................................................................
BATTERY SWITCH ...................................................................................................................................................................
REVERSE BUZZER ..................................................................................................................................................................
ELECTRIC PARTS (REAR)(5) ..............................................................................................................................................
ELECTRIC PARTS (REAR)(6) ..............................................................................................................................................
ELECTRIC PARTS (REAR)(7) ..............................................................................................................................................
ELECTRIC PARTS (REAR)(CLIP) ......................................................................................................................................
LARGE CAPACITY BATTERY .............................................................................................................................................
ELECTRIC PARTS (REAR)(3) ..............................................................................................................................................
ELECTRIC PARTS (REAR)(4) ..............................................................................................................................................
9. 327
329
331
・
333
335
337
339
341
343
345
347
349
351
353
355
357
359
361
363
367
369
371
373
375
377
379
381
383
385
387
389
391
393
395
397
399
PILOT HOSE COVER ..............................................................................................................................................................
PILOT PIPING PARTS ............................................................................................................................................................
MONO-LEVER ...........................................................................................................................................................................
PILOT PIPING (MONO-LEVER) .........................................................................................................................................
PILOT PIPING (PROTECTOR HOSE) ..............................................................................................................................
PILOT PIPING (PROTECTOR HOSE) ..............................................................................................................................
PILOT PIPING (CLIP)(2 SPOOL) ........................................................................................................................................
PILOT PIPING (3 SPOOL) .....................................................................................................................................................
PILOT PIPING (4 SPOOL) .....................................................................................................................................................
PILOT PIPING (4) ......................................................................................................................................................................
PILOT PIPING (5) ......................................................................................................................................................................
PILOT PIPING (6) ......................................................................................................................................................................
PILOT PIPING (7) ......................................................................................................................................................................
PILOT PIPING (WITH RIDE CONTROL) ..........................................................................................................................
PILOT PIPING (1) ......................................................................................................................................................................
PILOT PIPING (2-1) .................................................................................................................................................................
PILOT PIPING (2-2) .................................................................................................................................................................
PILOT PIPING (3-1) .................................................................................................................................................................
PILOT PIPING (3-2) .................................................................................................................................................................
MAIN PIPING (3) ........................................................................................................................................................................
MAIN PIPING (4) ........................................................................................................................................................................
MAIN PIPING (3 SPOOL) .......................................................................................................................................................
MAIN PIPING (3 SPOOL)(HIGH LIFT ARM) ...................................................................................................................
MAIN PIPING (4 SPOOL) .......................................................................................................................................................
CONTROL VALVE ..................................................................................................................................................................
WITHOUT RIDE CONTROL PARTS ..................................................................................................................................
RIDECONTROL PARTS .........................................................................................................................................................
MAIN PIPING (1) ........................................................................................................................................................................
MAIN PIPING (2) ........................................................................................................................................................................
HYDRAULIC SYSTEM
PUMP DEVICE ...........................................................................................................................................................................
ADAPTER (PUMP) ....................................................................................................................................................................
TEE (PUMP) ................................................................................................................................................................................
SIDE BRANCH PIPING ...........................................................................................................................................................
REAR CAMERA .........................................................................................................................................................................
BACK MONITOR .......................................................................................................................................................................
WITHOUT BACK MONITOR .................................................................................................................................................
10. 401
403
405
407
409
411
413
415
417
419
421
423
425
427
429
431
433
435
437
439
441
443
445
447
449
451
453
455
459
461
463
465
467
469
471
473
475
477
479
BRAKE PIPING (3) ....................................................................................................................................................................
BRAKE PIPING (4) ....................................................................................................................................................................
PARKING BRAKE ......................................................................................................................................................................
FLOOR MAT ...............................................................................................................................................................................
BRAKE (1 PEDAL) ....................................................................................................................................................................
BRAKE (2 PEDAL) ....................................................................................................................................................................
BRAKE PIPING (1) ....................................................................................................................................................................
BRAKE PIPING (2) ....................................................................................................................................................................
STEERING PARTS (2) ............................................................................................................................................................
STEERING PIPING ....................................................................................................................................................................
STEERING PIPING (WITHOUT EMERGENCY STEERING) ......................................................................................
STEERING PIPING (WITH EMERGENCY STEERING)(1) ..........................................................................................
STEERING PIPING (WITH EMERGENCY STEERING)(2) ..........................................................................................
OIL TANK PARTS (2)(WITH OUT RIDE CONTROL) ..................................................................................................
OIL TANK SUPPORT ..............................................................................................................................................................
STEERING PARTS (STEERING CYLINDER) .................................................................................................................
STEERING PIPING (ACCUMULATOR) .............................................................................................................................
STEERING PARTS (1) ............................................................................................................................................................
AUX. LEVER (INSIDE) .............................................................................................................................................................
PILOT PIPING (AUXILIARY LEVER)(INSIDE) ................................................................................................................
AUXILIARY LEVER COVER PARTS (INSIDE) ..............................................................................................................
OIL TANK .....................................................................................................................................................................................
OIL TANK PARTS (1) ..............................................................................................................................................................
LEVER COVER CAP ................................................................................................................................................................
CAP (WITHOUT FNR-SWITCH) ..........................................................................................................................................
RIGHT CONSOLE POCKET .................................................................................................................................................
AUX. LEVER (OUTSIDE) ........................................................................................................................................................
PILOT PIPING (MULTI-FUNCTION LEVER, AUX LEVER)(OUTSIDE) ...............................................................
ADAPTER (WORK LEVER) ...................................................................................................................................................
WORK LEVER HARNESS (WITHOUT LIFT ARM AUTO LEVELER) ....................................................................
WORK LEVER HARNESS (WITH LIFT ARM AUTO LEVELER) ..............................................................................
LEVER COVER ..........................................................................................................................................................................
RUBBER (WORK LEVER) ......................................................................................................................................................
MONO-LEVER HARNESS (WITH LIFT ARM AUTO LEVELER) ............................................................................
MONO LEVER PARTS ............................................................................................................................................................
ADAPTER (MONO-LEVER) ..................................................................................................................................................
WORK LEVER .............................................................................................................................................................................
PILOT PIPING (WORK LEVER) ...........................................................................................................................................
MONO-LEVER HARNESS (WITHOUT LIFT ARM AUTO LEVELER) ...................................................................
11. 481
483
485
・
487
489
491
493
495
497
499
501
503
505
507
509
511
513
515
517
519
521
(519)
523
525
527
529
531
533
535
537
539
541
543
545
・
QUICK COUPLER PIPING (3 SPOOL) .............................................................................................................................
QUICK COUPLER PIPING (4 SPOOL) .............................................................................................................................
LOG GRAPPLE ..........................................................................................................................................................................
TOOL
GENERAL PURPOSE BUCKET (WITH BOLT-ON TOOTH) 3.5m3 ......................................................................
ROCK BUCKET(WITH BOLT-ON TOOTH)2.7m3 ........................................................................................................
ROCK BUCKET(WITH BOLT-ON TOOTH)2.8m3 ........................................................................................................
GENERAL PURPOSE BUCKET (WITH BOLT-ON TOOTH)(COUPLER TYPE)2.5m3 ..................................
QUICK COUPLER .....................................................................................................................................................................
GENERAL PURPOSE BUCKET (WITH BOLT-ON CUTTING EDGE)(REINFORCEMENT T .......................
GENERAL PURPOSE BUCKET (WITH BOLT-ON CUTTING EDGE)3.6m3 ......................................................
GENERAL PURPOSE BUCKET (WITH BOLT-ON TOOTH)2.5m3 ........................................................................
GENERAL PURPOSE BUCKET (WITH BOLT-ON TOOTH)3.1m3 ........................................................................
GENERAL PURPOSE BUCKET (WITH BOLT-ON TOOTH)3.3m3 ........................................................................
GENERAL PURPOSE BUCKET (WITH BOLT-ON CUTTING EDGE)2.7m3 ......................................................
GENERAL PURPOSE BUCKET (WITH BOLT-ON CUTTING EDGE)(COUPLER TYPE)2. .........................
GENERAL PURPOSE BUCKET (WITH BOLT-ON CUTTING EDGE)3.2m3 ......................................................
GENERAL PURPOSE BUCKET (WITH BOLT-ON CUTTING EDGE)(REINFORCEMENT T .......................
GENERAL PURPOSE BUCKET (WITH BOLT-ON CUTTING EDGE)3.4m3 ......................................................
LIFT ARM PARTS (1) ..............................................................................................................................................................
LIFT ARM PARTS (1)(FORK) ...............................................................................................................................................
LIFT ARM PARTS (2) ..............................................................................................................................................................
LIFT ARM PARTS (2)(QUICK COUPLER) ......................................................................................................................
LIFT ARM PARTS (3) ..............................................................................................................................................................
LIFT ARM .....................................................................................................................................................................................
LIFT ARM (3 SPOOL) .............................................................................................................................................................
LIFT ARM (4 SPOOL) .............................................................................................................................................................
HIGH LIFT ARM .........................................................................................................................................................................
HIGH LIFT ARM (3 SPOOL) .................................................................................................................................................
LUBRICATE PIPING (2) ..........................................................................................................................................................
LOADER ATTACHMENT
LIFT ARM CYLINDER ..............................................................................................................................................................
BUCKET CYLINDER ................................................................................................................................................................
CYLINDER GUARD (BUCKET CYLINDER) .....................................................................................................................
LUBRICATE PIPING (1)(LIFT ARM KICK OUT) ...........................................................................................................
LUBRICATE PIPING (1)(LIFT ARM AUTO LEVELER AND KICK OUT) .............................................................
12. 549
・
551
555
557
559
561
563
565
569
573
575
577
579
581
583
585
587
589
591
593
・PARTS NO INDEX
NAME-PLATE (BATTERY DISCONNECT) .....................................................................................................................
NAME PLATE (RIDE CONTROL) .......................................................................................................................................
NAME PLATE (ANTI-SLIP TAPE) .....................................................................................................................................
NAME PLATE (FUSE BOX) ..................................................................................................................................................
NAME PLATE (WORK LEVER) ............................................................................................................................................
NAME PLATE (CAB)(PICTOGRAM) ..................................................................................................................................
NAME-PLATE (LIFTING LUG) ............................................................................................................................................
NAME-PLATE (BATTERY) ...................................................................................................................................................
NAME PLATE (WORK LEVER, AUX. LEVER) ...............................................................................................................
NAME PLATE (MONO-LEVER) ..........................................................................................................................................
NAME PLATE (FRONT) ..........................................................................................................................................................
NAME-PLATE (FRONT)(PICTOGRAM) ...........................................................................................................................
NAME PLATE (REAR) .............................................................................................................................................................
NAME PLATE (REAR)(PICTOGRAM) ...............................................................................................................................
NAME PLATE (CAB) ...............................................................................................................................................................
NAME PLATE
NAME PLATE (1) ......................................................................................................................................................................
NNAME PLATE (2) ...................................................................................................................................................................
NAME-PLATE (3) .....................................................................................................................................................................
NAME-PLATE (RUSSIAN) ....................................................................................................................................................
TOOLS ..........................................................................................................................................................................................
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. Applicable Model (適用機種): -
Mark(記号): -
Serial No.(適用号機): -
01 YA40013596 FRAME フレーム 1
02 J901640 BOLT ボルト 6
03 J222016 WASHER ワッシャ 6
04 YA00029210 SEAL シール 2
05 YA00036387 SEAL シール 4
06 YA00016707 SEAL シール 2
07 YA00038691 COVER カバー 1
08 J271020 BOLT,W/WASHER ボルト(ワツシヤ ツキ) 3 D
10 YA00015465 SEAL シール 2
11 YA00004985 SEAL シール 2
12 YA00029209 SEAL シール 2
13 YA00002160 SEAL シール 2
14 YA00029220 SEAL シール 1
15 YA00005988 SEAL シール 2
16 YA00015438 SEAL シール 2
17 YA00007281 SEAL シール 2
18 4471430 SEAL シール 2
19 YA00036388 SEAL シール 2
- 6 -
冷却装置 (1)
COOLING DEVICE (1)
ITEM
符号
PART NO.
部品番号
PART NAME 部 品 名
Q'TY
数量
S.C
サービ
ス
コード
SERIAL NO.
適用号機
ICA
互
換
性
REPLACEABLE PART
代 替 部 品
PART NO.
部品番号
Q'TY
数量