The Kalamazoo Industries sectioning saws are great for analyzing welding, creating steel coupons for material analyzing, checking material composition. Our sectioning saws vary in sizes, 10" up to 36".

1. Metallurgical Sectioning Saws
Kalamazoo Industries 6856 EK Ave Kalamazoo MI 49048
MADE IN USA!

2. Kalamazoo Metallurgical
Sectioning Saws
K26-36E K12-14MS K10WBTK20E

3. Metallurgical Sectioning
Saw Descriptions
• K36E
• 36" abrasive wheel, 50HP.
• Enclosed.
• Air/Oil power down feed and oscillation.
• Wet System.
• Options: door safety interlocks, T slot stable, Bed Filter Tank
System.
• 1.75" Spindle Arbor.

4. Metallurgical Sectioning
Saw Descriptions
• K26E
• 26" abrasive wheel, 50HP
• 1" Spindle Arbor.
• Enclosed.
• Wet System.
• Air/Oil Power Down Feed System and Oscillation.
• Options: Door Safety Interlocks, T slot table, Bed filter tank
system.

5. Metallurgical Sectioning
Saw Descriptions
• K20E
• 20" Wheel, 15HP Motor.
• 1" Spindle Arbor.
• Air/Oil Power Down Feed and Oscillation.
• Wet System
• Enclosed
• Options: Door Safety Interlocks, T Slot Table and Deep Bed
Filter Tank System

6. Metallurgical Sectioning
Saw Decriptions
• K12-14MS
• 14" wheel, 5HP Motor
• Enclosed
• Wet System
• 1" Spindle Arbor
• Air/Oil Power Down Feed System
• Options: Door Safety Interlocks, T Slot Table and Oscillation

7. Metallurgical Sectioning
Saw Descriptions
• K10WBT
• 10" wheel, 2HP 3PH
• Manual Operation
• Pump and Tank System
• 5/8 Spindle Arbor
• Enclosed
• T Slot Table
• Options: 1.25" or 32MM Spindle Arbor

8. Metallurgical Sectioning
Saw Use
• Destructive Testing
• Checking Welds
• Checking Heat Treat Penetration

9. For further information please contact us at
800-592-2050 or aaron@kalamazooind.com. Most
equipment can be modified to meet your needs.
Contact Information