This Teacher’s Guide is intended for you, the TLE teacher, who teaches any of the more than 24 TLE exploratory courses in the Grades 7 and 8 of the K to 12 curriculum.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 4
K to 12 carpentry teacher's guide
1. K to 12 BASIC EDUCATION CURRICULUM
Exploratory Course on
CARPENTRY
Republic of the Philippines
DEPARTMENT OF EDCUATION
TECHNOLOGY AND LIVELIHOOD EDUCATION
TEACHER’S GUIDE
2. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 2
TABLE OF CONTENTS
Introduction..................................................................................................................................................................................................................3
Background Information
The Overall Goal of the K to 12 Curriculum .......................................................................................................................................................3
The Conceptual Framework of the Teaching of TLE..........................................................................................................................................3
The TLE Exploratory Courses ...........................................................................................................................................................................5
The Learning Modules and Lessons............................................................................................................................................................................6
New Feature of the Teaching of TLE ...........................................................................................................................................................................6
About the Learning Module
Design of the Module.........................................................................................................................................................................................7
Parts of the Lesson ...........................................................................................................................................................................................8
Reflection ..................................................................................................................................................................................................................11
Curriculum Guide.......................................................................................................................................................................................................12
3. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 3
Teacher’s Guide for TLE Exploratory Course on CARPENTRY
Introduction
This Teacher’s Guide is intended for you, the TLE teacher, who teaches any of the more than 24 TLE exploratory courses in the Grades 7 and 8 of the
K to 12 curriculum. To ensure that you teach the TLE exploratory courses the way they were intended to be taught, you must see the big picture of the K to 12
curriculum and the teaching of TLE. Some background information is necessary.
Background Information
1. The Overall Goal of the K to 12 Curriculum
The K to 12 Curriculum has as its overarching goal the holistic development of every Filipino learner with 21st
century skills who is adequately
prepared for work, entrepreneurship, middle level skills development and higher education. The over arching goal of the K to 12 curriculum, tells
you that the teaching of TLE plays a very important role in the realization of the overall goal of the curriculum. Whether or not the K to 12 graduate
is skilled and ready for work, entrepreneurship and middle skills development depend to a great extent on how effectively you taught TLE.
2. The Conceptual Framework of the Teaching of TLE
Below is a schematic diagram of Technology and Livelihood Education (TLE) framework in general secondary schools. This should guide you in
the teaching of the TLE exploratory courses.
4. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 4
Figure 1.TLE Framework
The diagram shows that Technology and Livelihood Education encompasses the field of Home Economics, Industrial Arts, Agri-Fishery Arts and ICT. The 24
TLE courses can be categorized under any of these fields.
5. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 5
TLE is geared towards the development of technological proficiency and is anchored on knowledge and information, entrepreneurial concepts,
process and delivery, work values and life skills. K to 12 TLE is…
a. one that is built on adequate mastery of knowledge and information, skills and processes, acquisition of right work values and life skills;
b. one that equip students with skills for lifelong learning; and
c. one that is founded on cognitive, behavioral or psychomotor and affective dimensions of human development.
The diagram likewise shows that entrepreneurial concepts also form part of the foundation of quality TLE. It is expected that your TLE students,
after using the Learning Module on Entrepreneurship, imbibe the entrepreneurial spirit and consequently set up their own businesses in the areas
of Agri-Fishery Arts, Industrial Arts, Home Economics, and Information and Communication Technology.
TLE by its nature is dominantly a skill subject and so you must engage your students in an experiential, contextualized, and authentic teaching-
learning process. It is a subject where your students learn best by doing. It is integrative in approach. For instance, it integrates entrepreneurship
with all the areas of TLE. It integrates concepts, skills and values.
3. The TLE Exploratory Courses
TLE in Grades 7 and 8 are exploratory in nature. Your school will choose at least 4 from the list of 24 courses for which 23 Learning Modules have
been prepared. 1
Your school’s choice is determined by the availability of its resources (faculty and facilities) as well as the local needs and
resources of the community.
The 24 TLE exploratory courses focus on four basic common competencies: 1) use and maintenance of tools and equipment; 2) mensuration and
calculation; 3) occupational health and safety procedures, and 4) preparation and interpretation of technical drawing. Why are these competencies
called basic? Because they are competencies that you must acquire in order that you can do higher level competencies. They are also described
common because these are true to all TR-based TLE courses.
1
There are 24 TLE courses but there are only 23 Learning Modules because there is one Learning Module for Tailoring and Dressmaking.
6. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 6
The Learning Modules and Lessons
There is a Learning Module for each exploratory course. If there are 24 exploratory courses then you have 24 Learning Modules in your hands. But
you will use 4 Modules only for the entire year in Grade 7(plus a fifth one on Entrepreneurship) and another 4 Modules in Grade 8 (plus a fifth one on
Entrepreneurship).
Each Learning Module consists of 4 to 5 Lessons2
. The Lessons are focused on the 4 to 5 basic competencies. To avoid meaningless repetition of the
teaching of the 5 common competencies, you have to teach them in the context of the TLE course. For example, you teach “use and maintenance of tools” in
beauty care when you are teaching the course on Beauty Care. You teach the same competencies - use and maintenance of tools-in Horticulture but in the
context of Horticulture and so your tools will not be entirely the same.
New Feature on the Teaching of TLE
What’s new in the teaching of TLE in the K to 12 curriculum? In the K to 12 curriculum, the TLE courses are taught based on the learning
outcomes and performance criteria stated on the Training Regulations(TR)from Technical Education and Skills Development Authority (TESDA). They are TR-
based.
Why is this necessary? To prepare the K to 12 graduate for lucrative work, he/she must earn a National Certificate (NC)I, II or even an NC of higher
level that is required by industries. This he/she earns after passing an assessment given by TESDA.
How can you ensure that the K to 12 high school student (Grade 9 to 12) pass TESDA assessment and obtain an NC? By seeing to it that you
teach the TLE course in accordance with the performance criteria and learning outcomes laid down in the TESDA Training Regulations.
Do the exploratory courses enable the high school student to earn already an NC? Not yet. Completion of the exploratory courses may not yet
qualify a high school student to take an assessment for an NC. Instead, it helps him/her earn a Certificate of Competency (COC) at least in Grade 9 that will
lead eventually him/her to an NC. In short, the COC paves the way to the earning of an NC.
2
Some Learning Modules combined use and maintenance of tools to make one Lesson, so the number of Lessons amount to 4; others made separate Lessons for use of tools and for
maintenance of tools, thus the total is 5 Lessons.
7. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 7
Student’s choice of TLE specialization begins in Grades 9.Afterhaving been exposed to an array of TLE courses during the exploratory phase in the
first two years, the student will be most benefited, if in Grades 10,11, or 12 he/she continues with a TLE course in which he/she already has a COC. In that
way, he/she will get an NC faster.
About the Learning Module
1. Design of the Module
a. The Module is designed to be a teacher-assisted learning kit or a self-learning kit on competencies that a Grade 7 TLE ought to possess. It
explores the course on Carpentry which helps your student earn a Certificate of Competency in Grade 9which leads to a National Certificate Level I
/ II (NCI / II)in Grades 10, 11 or 12.
b. The Learning Module is made up of 4 to 5 Lessons based on the competencies. Each Lesson contains the following:
1) Learning Outcomes
2) Performance Standards
3) Materials/Resources
4) Definition of Terms
5) What Do You Already Know?
6) What Do You Need to Know?
7) How Much Have You Learned?
8) How Do You Apply What You Learned?
9) What Is Your Score?
10) References
There are some TLE Modules which have a section on “How Do You Extend Your Learning?”, This section is meant for enrichment. It is usually
given as an assignment for not everything can be taught and done in the classroom given a limited time.
c. The Self-check can also serve as the posttest of the lesson.
8. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 8
2. Parts of the Lesson. -The following explain the parts of each Lesson and describe what your students’- as well as your tasks are.
Part of the Lesson Students’ Task Teacher’s Task
1. Learning outcomes are what your TLE
student is supposed to know and be able to do
after using the module. Since our TLE courses
are TR-based, all learning outcomes are lifted
from the TESDA TR. In the Curriculum Guide
(the matrix which contains Content Standard,
Performance Standard, Learning
Competencies, Projects/Activities,
Assessment, Duration), the identified Learning
Outcomes are written in the column of Learning
Competencies.
Students acquaint themselves with the learning
outcomes and performance standards and
make them their personal goals.
You introduce the learning outcomes to your
students and make sure that they understand
them and make these learning targets their own.
Make these your goals for instruction.
2. Performance Standards are referred to as
“performance criteria” in the TESDA TR. They
are more specific descriptions of the student’s
behavior that serve as evidence that the
expected learning outcomes have been
realized with the expected level of proficiency
or in accordance with established standards.
The learning outcomes and performance
standards set the direction of your lessons.
These are what you should teach and, in turn,
what you should assess. They are identified
and are written for you in the Curriculum Guide.
Students clearly understand the performance
standards and make them their own learning
goals.
You introduce the performance standards to your
students and make sure that they understand
them and make these performance standards their
own.
Let these standards give your lesson its specific
direction.
3. Materials/Resources and References
To teach effectively, you need materials and
Get to know the materials. They are part of the
Lesson.
Prepare the materials you need in advance. For
gadget, tool or equipment, it is always wise to
9. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 9
references. Materials may include equipment,
hand tools or consumables. The references
are the books, magazines, articles, websites
you yourself and your students will read or
refer to in order to gain greater understanding
of the lesson. They are either in soft copy or
hard copy.
By all means, read the references for lesson
mastery.
prepare, check and try them in advance to ensure
that they function when you use them. As the
saying goes “forewarned is forearmed.”
Be resourceful in the preparation of materials. You
are strongly encouraged to use appropriate local
materials as substitute for listed materials that are
not available.
For effective teaching, your lesson preparation
should include reading the list of references.
Do not limit yourself to the list of references. If you
discover good reference material/s, add to the list
of references.
Introduce the references to your students.
Motivate them to read these references as they go
through the module for mastery of the lesson.
4. The definition of terms and acronyms will
help you understand the meaning of key words
in your lesson. Defining key words as they are
used in your lesson will ensure that the key
terms in your lesson mean one and the same
for everyone in class and so avoid
misunderstanding.
Refer to the definition of terms for greater
understanding of the lesson.
Remind your students to refer to the definition of
terms and acronyms for clearer understanding of
the lesson.
5. The section “What Do You Already Know” is
intended to determine entry knowledge and
skills of your students to find out if you have to
teach the lesson, teach some parts of the
Take the test honestly.
Check answers against the answer key
provided.
Tell your students to accomplish the pretest.
Explain that the purpose of the pretest is to find
out how much they already know about the lesson
in order to determine your next steps. It is,
10. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 10
lesson or skip it entirely because your students
already know it. This is done by way of a
pretest.
therefore, necessary that they take the test
honestly, if they want to learn or want to be
helped.
Make it clear to them that their scores will not be
recorded for grading purposes and will not be
taken against them.
If you find out that your students already know
what you are about to teach, logic dictates that
you do not need to teach it anymore. You may as
well proceed to the next lesson. If, however, you
find out that they do not yet know what you are
about to teach, then by all means teach. Or if you
discover that your students have some erroneous
concepts, then teach and correct their
misconceptions. To know what your students
already know and do not yet know will guide you
in adjusting your instruction.
6. “What Do You Need To Know?”- This
section contains one or more Information
Sheets and for some modules an Operation
Sheet. These are important notes for the TLE
student to read after which he/she is asked to
do a Self-check to determine how much he/she
has learned. The self-check functions as a
pretest.
Read and understand the Information Sheet/s
and /or Operation Sheet.
Be prepared For a Self-check which serves as a
posttest.
Correct answers by referring to the answer key.
Make sure students are engaged in reading the
Information Sheet/Observation Sheet and in
answering the self-check.
Give assistance to your students where needed.
7. “How Do You Apply What You Learned?” –
In this section, you give your student the
opportunity to transfer what he/she has learned
Do the Activity.
To determine level of performance, use the
Find a way to test real life application of what your
students have learned.
11. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 11
in another activity or in real life situation.
Ideally, this should be a performance test, what
you usually call practical test. If “the proof of
the pudding is in the eating”, then your student
must be able to apply what she/he learned in
real-life setting or must be able to come up with
a product as an evidence of learning.
scoring rubrics or check answers against the
answer key, which ever is applicable.
Reflect on assessment results.
Do not hesitate to use ways of determining how
your students can apply learned facts and
concepts which are more authentic and realistic
than that/those given in the Module.
Reflect on assessment results. Use assessment
results in planning your instruction.
8. How Do You Extend Your Learning? – As
the word implies, this activity is done outside
class hours for enrichment purposes. This can
reinforce lesson mastery.
Do the task assigned outside class hours. Motivate the students to do the task by making
clear what the enrichment activity is about –why it
is given, how it is done, how it relates to the class
lesson .
Reflection
It is a good habit to reflect on your teaching for the day – what went well, what did not go well, why this activity went well with this group, why it didn’t
work well with the other group. What are your realizations? What are lessons learned? Jot them down in your diary. Commit them to your memory. If you do
this consistently, you will find your delivery improve substantially.
12. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 12
Curriculum Guide for the Exploratory Course on CARPENTRY
For you to get a complete picture of the complete TLE exploratory course on Carpentry, you are hereby provided with the Curriculum Guide on
Carpentry.
Content Standard Performance Standard
Learning
Competencies
Project/ Activities Assessment Duration
LESSON 1: PREPARE CONSTRUCTION MATERIALS AND TOOLS
Demonstrate understanding
of/on:
Types and uses of
construction materials
Kinds of carpentry tools
Description of materials
and tools
Listing of materials as
per company standards.
.
1. Tools and materials are
identified as per job
requirements.
2. Tools are classified according
to their functions per job
requirements.
3. Materials are classified
according to their uses in a
specific construction project.
4. Tools and materials are
selected per job requirement.
LO1. Identify
materials and
tools applicable
for a specific
construction job.
1. Enumerating and
describing the tools and
materials used in
carpentry works.
Written test
Performance
test
6 hours
Sample requisition form
Requested tools and
materials according to list
Requisition procedures
1. Needed materials and tools
are listed as per job
requirement.
2. Materials and tools are
requested according to the list
prepared.
3. Requests are done as per
company’s standard operating
procedures (SOP).
4. Materials and tools are
LO2. Request
appropriate
materials and
tools.
1. Fill up necessary forms
as per job requirement.
Written test
Performance
test
3 hours
13. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 13
Content Standard Performance Standard
Learning
Competencies
Project/ Activities Assessment Duration
substituted and provided for
unavailable ones without
sacrificing cost and quality of
work.
Acquire and inspect
materials/tools
- Procedures in
receiving tools and
materials
- Proper inspection of
tools and materials
received.
- Proper handling of
tools and materials.
1. Materials and tools as per
quantity and specification based
on requisition are received and
inspected.
2. Tools and materials are
checked for damages and
manufacturing defects.
3. Materials and tools received are
handled with appropriate safety
devices.
4. Materials and tools are stored in
aside to appropriate locations
nearest the workplace.
LO3. Receive
and inspect
materials
1. Writing the possible
defects and/or damages
of materials and tools
used in carpentry.
Written test
Performance
test
2 hours
LESSON 2: MAINTAINING TOOLS AND EQUIPMENT
Demonstrate understanding
of/on:
Classification of hand
tools and equipment
Procedure in segregating
and labeling non-
functional tools and
equipment.
Procedure in checking
1. Tools and equipment are
identified according to
classification/specification and
job requirements.
2. Functional andnon-functional
tools and equipment are
segregated and labeled
LO1. Check condition
of tools and
equipment.
1. Performing the actual
segregation of functional
and non-functional tools
and equipment.
Performance
test
Written test
3 hours
14. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 14
Content Standard Performance Standard
Learning
Competencies
Project/ Activities Assessment Duration
condition of Personal
Protective Equipment
(PPE).
according to classification.
3. Safety of tools and equipment
are observed in accordance
with manufacturer’s
instructions.
4. Conditions of PPE are
checked in accordance with
manufacturer’s instructions.
Lubricating tools and
equipment
Preventive maintenance
techniques and
procedures
Steps in filling out
inspection report form
1. Lubricants are identified
according to types of
equipment.
2. Tools and equipment are
lubricated according to
preventive maintenance
schedule or manufacturer’s
specifications.
3. Measuring instruments are
checked and calibrated in
accordance with
manufacturer’s instructions.
4. Tools are cleaned and
lubricated according to
standard procedures.
5. Defective equipment and tools
are inspected and replaced
according to manufacturer’s
specification.
6. Work place is cleaned and
kept in safe state in line with
OSHC regulations
LO2. Perform basic
preventive
maintenance.
1. Performing the proper
selection and application
of lubricants used for
preventive maintenance.
Written test
Performance
test
4 hours
15. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 15
Content Standard Performance Standard
Learning
Competencies
Project/ Activities Assessment Duration
LESSON 3: PERFORM MENSURATION AND CALCULATION
Demonstrate understanding
of/on:
Types of Measuring tools
Proper handling of
measuring instruments
Linear measurement for
6 faces lumber
1. Measuring tools are
selected/identified as per
object to be measured or job
requirements.
2. Correct specifications are
obtained from relevant
sources.
3. Measuring instruments are
selected according to job
requirements.
4. Alternative measuring tools are
used without sacrificing cost
and quality of work.
5. Measurements are obtained
according to job requirements.
LO1. Select
measuring
instruments.
1. Demonstrating the proper
handling of measuring
tools.
Actual
demonstration
Direct
observation
Written
test/questioning
2 hours
Systems of measurement
Reading of measuring
instrument/tools
Converting fraction to
decimal
Converting units of
measure
Taking Dimensions
Calculating boardfoot of
lumber
6. Accurate measurements are
obtained according to job
requirements.
7. Work pieces are measured
according to job requirements
LO2. Carry out
measurement
and calculations.
1. Measuring lengths, width,
and thickness of pieces of
wood.
Written Test
Performance
Test
4 hours
16. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 16
Content Standard Performance Standard
Learning
Competencies
Project/ Activities Assessment Duration
LESSON 4: INTERPRETING DRAWINGS AND PLANS
Demonstrate understanding
of/on:
Drawing symbols and
signs
Uses of alphabet of lines
1. Signs, symbols, and data are
identified according to job
specifications.
2. Signs, symbols, and data are
determined according to
classification or
appropriateness in drawing.
LO1. Analyze signs,
symbols, and
data.
1. Drawing and describing
the different signs and
symbols used in the
project plans.
Written test
Performance
test
4 ho
urs
interpret simple isometric
drawing of center table
1. Necessary tools, materials,
and equipment are identified
according to the plan.
2. Components, assemblies or
object are recognized as per
job requirement.
3. Dimensions and
specifications are identified
according to job
requirements.
LO2. Interpret
technical
drawings and
plans.
1. Explaining the specific
uses of lines in the
drawing.
Performance
test
Written test
2 hours
Procedure in sketching
isometric box
Steps in sketching
orthographic drawing
4. Correct freehand sketching is
produced in accordance with
the job requirements
LO3.Apply freehand
sketching
2. Demonstrating freehand
sketching
Performance
test
Written test
17. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 17
Content Standard Performance Standard
Learning
Competencies
Project/ Activities Assessment Duration
LESSON 5: PRACTICING OCCUPATIONAL HEALTH AND SAFETY PROCEDURES
Demonstrate understanding
of/on:
Hazards and risks
identification and control
- Working condition that
can produce hazards
- Signs, signals and
barricades
- Accidents prevention
signs and tags
1. Workplace hazards and risks
are identified and clearly
explained.
2. Hazards/risks and their
corresponding indicators are
identified in accordance with
the company procedures.
3. Contingency measures are
recognized and established in
accordance with organizational
procedures.
LO1. Identify hazards
and risks.
1. Listing down the possible
hazards and risks
common in the
workplace.
Performance
test
Written test
Safety regulations
PPE and uses
Occupational health and
safety (OHS) procedure in
controlling hazards and
risks
Procedure in dealing with
workplace, accidents, fire
and emergencies
Role playing creating a
team and audience judges
1. OHS procedures for controlling
hazards and risks are strictly
followed.
2. Procedures in dealing with
workplace accidents, fire, and
emergencies are followed in
accordance with the
organization’s OHS policies.
3. Personal protective equipment
(PPE) is correctly used in
accordance with organization’s
LO2. Control
hazards and
risks.
1. Writing the importance of
knowing the hazardous
and risky objects/fixtures
in the workplace.
Written test
Performance
test
4 hours
18. K to 12 TECHNOLOGY AND LIVELIHOOD EDUCATION
INDUSTRIAL ARTS – CARPENTRY
(Exploratory)
*TWG on K to 12 Curriculum Guide – version as of April 10, 2012 18
Content Standard Performance Standard
Learning
Competencies
Project/ Activities Assessment Duration
on planning and
controlling risk and
hazards
OHS procedures and
practices.
4. Procedures in providing
appropriate assistance in the
event of workplace
emergencies are identified in
line with the established
organizational protocol.
What is 5’s
- How to practice 5’s
- What an individual
gain from 5’s
- A healthy shop is a
safe shop
1. Procedures in emergency
related drill are strictly followed
in line with the established
organizational guidelines and
procedures.
2. OHS personal records are
filled up in accordance with
workplace requirement
3. PPEs are maintained in line
with organizational guidelines
and procedures.
LO3. Maintain
occupational
health and
safety
awareness.
1. Explain the advantages of
practicing safety
precautions in the work
area.
Written test
Performance
test
3 hours
39hours
“By three methods we may learn wisdom: First, by reflection, which is noblest; second, by imitation, which is
easiest; and third by experience, which is the bitterest.”
- Confucius