This document provides an overview of roller coverings and related equipment from Jemmco, LLC. It includes sections on roller coverings for corona treaters, high release applications, traction applications, conductive applications, and web cleaning equipment. Specific products highlighted include JemmTron corona treater roll coverings, JemmSil high release sleeves and tapes, JemmTrac traction roll coverings, JemmStat conductive roll coverings, and JemmTac web cleaning equipment. The document also discusses roller cores, custom sleeves, quality control equipment, maintenance supplies, and Jemmco as a supplier to the extrusion and web converting industries.
1. INTERACTIVE TABLE OF CONTENTS
Click on the product names below and on subsequent pages to be linked to more information within this document. Click the
Jemmco, LLC logo at the bottom of any subsequent page to return to this interactive menu.
Rollers, Roller Coverings & Equipment (p 2-22)
JemmTron Corona Treater Roll Coverings p 3
JemmSil High Release Roll Coverings p 4
JemmTrac Traction Roll Coverings p 12
JemmStat Conductive Roll Coverings p 14
JemmTac Web Cleaning Equipment p 17
JemmTac Web Cleaning Roll Coverings & Accessories p 20
Roller Cores p 22
Custom Sleeves p 23
Quality Control Equipment & Supplies (p 24-25)
Dyne Test Products p 25
Maintenance & Supplies (p 26-32)
JemmClean Cleaning Solutions & Supplies p 27
JemmStat Passive & Active Anti-Static p 28
JemmStat Active Anti-Static p 29
JemmStat Passive Anti-Static p 32
Leading supplier to the extrusion and web converting industries
P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com • sales@jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
2. Jemmco, LLC
Rollers,RollerCoverings&Equipment
Jemmco’s line of rollers and roller coverings feature proprietary formulations, specially
developed to provide unique properties for a variety of converting and extrusion
applications. Most of theseroller coverings aredesigned to be installed on site,eliminating
the need for spare rollers and two way shipping. Although some of the coverings do
require factory application, they are designed to provide long lasting performance, often
reducing the need for spare rollers.
P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
RollerCores&CustomSleeves
EZ Sleeve Roller Live Shaft Idler
Rolls
Dead Shaft Idler
Rolls
Custom Roller
Cores
Inspection
Sleeves
Custom Sleeves
• Silicone Dielectric & Conductive Corona Treater Sleeves
• Ceramic Corona Treater Roll Coverings
• Ceramic Electrode Tubes
• Epoxy Corona Treater Roll Coverings
JemmTron Corona Treater Roll Coverings
Jemmco, LLC
• Rubber Release Sleeves
• Teflon® Heat Shrink Sleeves
• PTFE Heat Shrink Sleeves
• Dimpled, Diamond Embossed & Fluoropolymer Tapes & Belts
• Thermal Spray Coatings
JemmSil High Release Roll Coverings
• Rubber Traction Sleeves
• Thermal Sprayed Traction Roller Coverings
• Smooth, Sillicone Impregnated Cloth, Rubberized Cork and
More Traction Tapes
JemmTrac Traction Roll Coverings
• Rubber Conductive Sleeves
• Conductive Heat Shrink Sleeves
• Conductive Ceramic Roll Coverings
JemmStat Conductive Roll Coverings
• Component Style Web Cleaners
• System Style Web Cleaners
• Web Cleaning Rubber Sleeves
• Pre-Sheeted Adhesive Rolls
• Handheld Web Cleaning Rollers
• Bonded Contact Cleaning Roller Coverings
JemmTac Web Cleaning Equipment, Roll Coverings & Accessories
3. JemmTron
Corona Treater Roll Coverings
• Intended for covered roll treater
applications
• Manufactured to very tight tolerances
• FDA compliant
• Fits foreign and domestic treaters
• Wide range of sizes (1.5-8”)
• Custom sizes available upon request
• Available in custom lengths or 10
meter long rolls
• JemmTron CRC 100 Conductive, CRC 200 Semi-Conductive &
CRC 300 Dielectric Corona Treater Roll Covering
• High quality, plasma spray coated
• Designed for the harshest corona treating applications
• Impervious to knife cuts or scratches
• Applied onto your existing treater roll core
As the largest supplier of Silicone Treater Sleeves in North America and the choice of most
domestic and international OEM’s, Jemmco is proud to offer the SRS Series Dielectric
Silicone Corona Treater Sleeve and the CRS 100 Conductive Silicone Corona Treater Sleeve
to meet a wide range of applications. With their easy in-plant installation, both sleeve
types create significant savings by eliminating the need for costly spare rollers, heavy
metal roller cores, and costly two-way shipping.
P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
JemmTron Silicone Corona Treater Sleeves
Sleeve Installation is Easy!
Using
compressed
air, the
JemmTron
Silicone
Corona Treater Sleeves are easily
applied to existing idler rolls by
your in-plant operating team.
JemmTron Ceramic Corona Treater Roll Coverings
• Fits domestic and foreign Corona Treater styles
• Square and round tubes available
• Economically priced
• Available in a wide range of sizes
• Long-lasting & durable
JemmTron Ceramic Electrodes
• Long-lasting, durable surface capable of resisting knife cuts
and minor operator abuse
• Withstands rough corona treating environment - endures the
heat, ozone and UV generated
• Reduces porosity, preventing pinholes & premature fails
JemmTron Epoxy Corona Treater Roll Coverings
Corona Treater Accessories
Treater Roll
Patch Kit
Sleeve
Installation Tool
EZ Sleeve
Rollers
Ground Brush
SRS Dielectric Silicone Corona Treater Sleeves
• Intended for bare roll & dual dielectric
treating applications
• Wide range of sizes (1-8”)
• Prevents corrosion of treater ground roll
• Higher treat levels than conventional
dual dielectric roller coverings
• Reduces backside treat
CRS 100 Conductive Silicone Corona Treater Sleeves
HV Wire Treater Parts
4. JemmSil
High Release Roller Coverings
P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
Jemmco carries a full line of release roller coverings and roller wraps,
designed to meet the needs of a wide range of applications. Our line
of JemmSil Roller Wraps provide high release properties and unique
surface finishes, which are designed to reduce the surface contact of
the web, enhancing the release characteristics.
JemmSil
Product
Product Photo Release
Properties
Heat
Resistance
Wear
Resistance
Installation
Type
In-Plant
Installation
RS100 Release
Sleeve
Very Good 400o
F Very Good Stretch Sleeve Yes
RS200 High
Release Sleeve
Excellent 400o
F Good Stretch Sleeve Yes
HS100 Teflon®
FEP Heat
Shrink Sleeve
Very Good 400o
F Fair Heat Shrink Yes
HS200 High
Release Heat
Shrink Sleeve
Excellent 400o
F Good Heat Shrink Yes
HS300 High
Wear Resistant
Sleeve
Very Good 550o
F Very Good Heat Shrink Yes
Find the Perfect Release Sleeve For Your Stickiest Application!
5. JemmSil
Release Tapes & Roller Wraps
P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
From dimpled or diamond-embossed to smooth or PTFE Coated Fabric Tape, Jemmco’s full
line of JemmSil Release Tapes offers solutions for every application.
JemmSil
Product
Product Photo Release
Properties
Traction
Properties
Adhesive Type Surface Finish Dimensions
JemmSil 812 Excellent Excellent Acrylic Dimpled 2” wide x
27.5 yds
JemmSil 684 Very Good Good Acrylic Dimpled 2” wide x
27.5 yds
JemmSil 4863 Very Good Very Good Rubber Dimpled 2” wide x
27.5 yds
JemmSil S420 Very Good Very Good Acrylic Diamond-
Embossed
2” wide x
27.5 yds
JemmSil PTFE
Coated Fabric
Tape
Excellent Fair Silicone Smooth 1-3” wide x 18
yds or 36 yds,
3, 5, 6, 10 mil
thick
JemmSil
CT1125
Good Very Good Acrylic Smooth 2” wide x
36 yds
*Inquire about our custom tape widths.
Find the Perfect Release Tape For Your Stickiest Application!
6. JemmSil RS100
HIGH RELEASE SLEEVES
JemmSil RS100 is a proprietary rubber sleeve which features excellent release properties,
very good wear properties, a low C.O.F. surface and very good temperature resistance.
JemmSil RS100 is the ideal alternative to applications requiring more expensive bonded
rubber coverings and release hard coatings. JemmSil RS100 High Release Sleeves fit over
existing idler rolls and eliminate the need for sending your rollers out to be covered, as they can
be easily applied in your plant.
Our JemmSil RS100 High Release Sleeves feature a continuous operating temperature of
350º F and an intermittent service temperature of 400º F. This covering can be cleaned with
IPA (Isopropyl Alcohol) and Water, however we recommend our JemmClean TR Treater
Roll Cleaning Solution.
Jemmco, LLC
10936 North Port Washington Road, Mequon, WI 53092
Phone: 262-512-9559, Fax: 262-478-1306
RS100 High Release Sleeves are supplied with a .090” wall thickness and are available in a siz-
es to fit a wide range of roller diameters. These sizes include 1.5”, 2.0”, 2.5”, 3.0”, 3.5”, 4.0”,
4.5”, 5.0”, and 6” diameters.
7. JemmSil RS200
HIGH RELEASE SLEEVES
JemmSil RS200 is a proprietary
rubber sleeve which features excellent
release properties and very good
temperature resistance. JemmSil
RS200 is ideal for applications requir-
ing high temperature, non-stick properties
and is often used in place of the more
expensive bonded rubber coverings and
release hard coatings. JemmSil RS200
High Release Sleeves fit over existing
idler rolls and eliminate the need for
sending your rollers out to be covered, as
they can be easily applied in your plant.
Jemmco, LLC
10936 N Port Washington Road, Mequon, WI 53092
Phone: 262-512-9559, Fax: 262-478-1306
www.jemmco.com
JemmSil RS200 High Release Sleeves are supplied with a .090” wall thickness and are
available in a sizes to fit a wide range of roller diameters. These sizes include 1.0”,1.5”,2.0”,
2.5”,3.0”,3.5”, 3.75”,4.0”,4.5”, 5.0”, 5.5”,6.0”,7.0” and 8.0” diameters.
Our JemmSil RS200 High Release Sleeves feature a continuous operating temperature of
350º F and an intermittent service temperature of 400º F. This covering can be cleaned with IPA
(Isopropyl Alcohol) and Water, however we recommend our JemmClean TR Treater Roll
Cleaning Solution.
JemmSil RS200 High Release Sleeves are ideal for processing pressure sensitive materials
such as labels and label stock. Providing excellent release properties and good heat resistance,
these sleeves are commonly used in idler roll applications and in low temperature ovens.
8. JemmSil HS100
HIGH RELEASE
HEAT SHRINK ROLL COVERINGS
Jemmco, LLC
10936 North Port Washington Road Mequon, WI 53092-5031
Phone: 262-512-9559 Fax: 262-478-1306
www.jemmco.com
JemmSil HS100 High Release Teflon® FEP Heat
Shrink Coverings offer excellent release properties,
outstanding chemical resistance and low C.O.F. surfaces,
making them ideal for many web processing applications.
Common applications include idler rolls on extrusion coating
and laminating nip rollers, coating idler rolls, laminating idler
rolls and printing press idler rolls.
Our seamless JemmSil HS100 High Release Heat
Shrink Roller Coverings are available in .020” or .060”
wall thicknesses as a standard, and are available in a wide
range of diameters. Each sleeve is custom made for each ap-
plication.
All of our JemmSil HS 100 High Release Teflon® Heat
Shrink Coverings can be supplied as etched with adhesive,
or unetched without adhesive; enabling them to be used in
most roller applications, including nip rolls and idler roll
functions.
JemmSil High Release Teflon® Heat Shrink Coverings
Thermal Properties
Melting Point 530ºF
Shrinkage Temperature 280ºF
Flammability Non-Flammable ASTM D635
Physical Properties
Diameter Range Up to 15’
Thickness Range .010” to .125”
Ultimate Tensile Strength 3000 psi
Elongation 200% ASTM D882-61T
% Diameter Shrinkage @ 250ºF 10% minimum D882-61T
Max Permissible External Loading, 25ºC 35 pli
Hardness, 25ºC Shore Durometer 96 Shore A
JemmSil High Release Teflon® Heat Shrink Coverings are part of a full line of our full
line of JemmSil High Release Roller Coverings, Tapes and Roller Wraps.
To learn more about these and our other unique roller coverings, call us:
9. JemmSil HS200
HIGH RELEASE HEAT SHRINK SLEEVES
JemmSil HS200 High Release Heat Shrink Sleeves feature excellent release
properties and very good temperature resistance. This unique material is applied onto
a high temperature resistant thermoplastic heat shrinkable sleeve. JemmSil HS200
is ideal for applications requiring high temperature, non-stick properties and is often
used in place of the more expensive release hard coatings. JemmSil HS200 High
Release Heat Shrink Sleeves fit over existing idler rolls and eliminate the need for
sending your rollers out to be covered, as they can be easily applied in your plant.
JemmSil HS200 High Release Heat Shrink Sleeves are supplied with either
a .040” or .080” wall thickness; bondable or non-bondable and are custom made to fit
a wide range of roller diameters starting at 3” and larger.
Our JemmSil HS200 High Release Heat Shrink Sleeves are easy to install us-
ing an industrial heat gun. The sleeves are simply slid over your existing roller core.
Even heat is then applied, causing the sleeve to shrink fit onto the roller.
Our JemmSil HS200 High Release Sleeves feature a continuous operating
temperature of 350º F and an intermittent service temperature of 400º F. This covering
can be cleaned with IPA (Isopropyl Alcohol) and Water, however we recommend our
JemmClean TR Treater Roll Cleaning Solution.
Jemmco, LLC
10936 North Port Washington Road, Mequon, WI 53092
Phone: 262- 512-9559, Fax: 262-478-1306
www.jemmco.com
10. JemmSil HS300
HIGH RELEASE, WEAR RESISTANT
PTFE HEAT SHRINK ROLL COVERINGS
Jemmco, LLC
10936 North Port Washington Road Mequon, WI 53092-5031
Phone: 262-512-9559 Fax: 262-478-1306
www.jemmco.com
JemmSil HS300 High Release, Wear Resistant PTFE
Heat Shrink Coverings offer excellent release properties,
outstanding chemical resistance and excellent wear
resistance, making them ideal for many web processing
applications.
Common applications include idler rolls on coating and
laminating lines, printing press idler rolls, slitting lines, foil
processing lines, bowed roll covers, papermaking and more.
JemmSil HS300 High Release, Wear Resistant PTFE
Heat Shrink Roller Coverings are manufactured with
a .060” wall thickness, and supplied as a bondable covering
with adhesive, as a standard. They are available in diameters
5” to 15’. Each sleeve is custom made for each application.
JemmSil HS300 High Release, Wear Resistant PTFE
Heat Shrink Coverings provide excellent wear resistance,
having proven to last at least 4 to 10 times longer than
standard FEP Teflon® heat shrink sleeves. They are resistant
to most chemicals and can withstand continuous operating
temperatures up to 400° F and short periods up to 550°F.
Physical Properties
Diameter Range 5” to 15’
Thickness Range .060”
Ultimate Tensile Strength 3000 psi
Elongation 100% ASTM D882-61T
% Diameter Shrinkage @ 300ºF 10% minimum
Flammability Non-Flammable
C.O.F. (against wet polished steel) .04-.08
Color White
Chemical Properties
Effects of all acids None
Effects of all alkalies None
Effects of all organic solvents None
H²O absorption, 1/8” thickness <0.01%
JemmSil HS300 High Release, Wear Resistant PTFE Heat Shrink Coverings are part
of our complete line of JemmSil High Release Roller Coverings, Tapes and Roller
Wraps.
JemmSil HS 300 High Release, Wear Resistant PTFE Heat Shrink Coverings are easy
to install and can be done on-site.
11. JemmSilJemmSilJemmSilJemmSil HS350
HIGH RELEASE, ANTI-STATIC
PTFE HEAT SHRINK ROLL COVERINGS
Jemmco, LLCJemmco, LLCJemmco, LLCJemmco, LLC
10936 North Port Washington Road Mequon, WI 53092-5031
Phone: 262-512-9559 Fax: 262-478-1306
www.jemmco.com
JemmSilJemmSilJemmSilJemmSil HS300 High Release, High Temperature PTFE
Heat Shrink Coverings offer excellent release properties,
outstanding chemical resistance, excellent wear resistance, and
anti-static features making them ideal for many web processing
applications.
Common applications include idler rolls on coating and laminating
lines, printing press idler rolls, slitting lines, foil processing lines,
papermaking on bowed roll covers and more.
JemmSilJemmSilJemmSilJemmSil HS300 High Release, High Temperature PTFE
Heat Shrink Roller Coverings are manufactured with a .060” wall
thicknesses, and supplied as a bondable covering with adhesive, as
a standard. They are available in diameters 5” to 15’. Each sleeve is
custom made for each application.
JemmSilJemmSilJemmSilJemmSil HS 300 High Release, High Temperature PTFE
Heat Shrink Coverings provide excellent wear resistance, having
proven to last at least 4 to 10 times longer than standard FEP heat
Physical Properties
Diameter Range 5” to 15’
Thickness Range .060”
Ultimate Tensile Strength 3000 psi
Elongation 100% ASTM D882-61T
% Diameter Shrinkage @ 300ºF 10% minimum
Flammability Non-Flammable
C.O.F. (against wet polished steel) .04-.08
Color White
Chemical Properties
Effects of all acids None
Effects of all alkalies None
Effects of all organic solvents None
H²O absorption, 1/8” thickness <0.01%
Electrical Properties
Surface Resistivity 107-109 ohms/sq. in.
JemmSilJemmSilJemmSilJemmSil HS 350 High Release, High Temperature, Anti-Static PTFE Heat Shrink Coverings
are part of a full line of our full line of JemmSilJemmSilJemmSilJemmSil High Release Roller Coverings, Tapes and
Roller Wraps.
To learn more about these and our other unique roller coverings, call us:
shrink sleeves and can withstand continuous operating temperatures up to 400° F and short periods up to
550°F.
JemmSilJemmSilJemmSilJemmSil HS 300 High Release, High Temperature, Anti-Static PTFE Heat Shrink Coverings
are easy to install and can be done on-site.
12. JemmTrac Traction Roller Sleeves are a non scratching, non-
marring, economical solution to web handling with light tensions.
This proprietary rubber sleeve provides a unique tacky surface
that will keep rolls turning and prevent them from marking or
scratching substrates. JemmTrac Traction Roller Sleeves are the
perfect replacement for expensive tapes and roller wraps, and
won’t shed particles like many of the cork tapes available.
www.jemmco.com
• Economical traction roller covering
• Installed in plant
• No adhesives needed
• Available in a wide range of sizes
• Fits over existing roll
• Eliminates need for spare rollers and two-way
shipping costs
• No seams or gaps that can mar films
• Easy to install
• Economical
JemmTrac Traction Roller Sleeves
JemmTrac XT Traction Roller Sleeves provide all of the features
and benefits of the JemmTrac Traction Roller Sleeves with an
even tackier surface for those applications requiring extra
grip.
• All the features and benefits of the JemmTrac Traction Roller Sleeve
(as listed above)
• Extra tacky surface ideal for applications requiring extra grip
JemmTrac XT Traction Roller Sleeves
JemmTrac
Traction Roller Coverings
Available in a wide range of sizes: 1”, 1.25”, 1.5”, 1.75”, 2”, 2.5”, 3”, 3.5”, 4”, 4.5”, 5”, 5.5”, 6”
Wall thickness: 2mm
Available in a wide range of sizes: 1”, 1.5”, 1.75”, 2”, 2.25”, 2.5”, 3”, 3.5”, 3.75”, 4”, 4.5”, 5”, 5.5”,
6”, 7”, 7.5”, 8”
Wall thickness: 2mm
13. P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
From dimpled or cork to smooth, Jemmco’s full line of JemmTrac Traction Tapes offers solutions
for every application.
JemmTrac
Product
Product Photo Release
Properties
Traction
Properties
Adhesive Type Surface Finish Dimensions
JemmTrac
Cork Tape
- Good Acrylic Cork 1-3” wide x
1/32”, 1/16”,
or 1/8” thick x
50’ or 100’
JemmTrac 4563 Good Very Good Rubber Smooth 2” wide x
27.5 yds
JemmTrac TL Good Very Good Acrylic Smooth 2” wide x
35 m
JemmTrac T Good Excellent Acrylic Smooth 2” wide x
35 m
JemmTrac 810 Good Very Good Acrylic Smooth 2” wide x
27.5 yds
JemmTrac 811 Good Excellent Acrylic Dimpled 2” wide x
27.5 yds
*Inquire about our custom tape widths.
Find the Perfect Traction Tape For Your Application!
JemmTrac
Traction Tapes & Roller Wraps
14. JemmStat CHS 100 Conductive Heat Shrink Sleeve
JemmStat
Conductive Roller Coverings
• Conductive heat shrink fluoropolymer material to reduce
anti-static build up
• Excellent chemical resistance
• Very good release properties and thermal resistance
• Excellent wear resistance
• Easy installed in plant
• Eliminates two-way shipping and need for spare rollers
• 3-36” diameter
The JemmStat line of conductive roller coverings offers excellent release properties, chemical
resistance, wear resistance, and anti-static features making them ideal for many web processing
applications. The JemmStat product line includes expandable rubber sleeves and heat shrink
sleeves for easy installation, in addition to a variety of passive anti-static products. Our JemmStat
line of conductive coverings offer several different conductivity ranges depending on the material
selected and are available in a wide range of sizes.
P: 262.512.96559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
• Extremely hard surface impervious to knife cuts
• High continuous operating temperature
• High conductivity
• Smooth surface finish
• Excellent chemical resistance
• Excellent wear resistance
JemmStat CRC 100 Conductive Ceramic Roll Covering
• Extremely hard surface
• Impervious to knife cuts
• High continuous operating temperature
• Semi conductive
• Smooth surface finish
• Excellent chemical & wear resistance
JemmStat CRC200SemiConductiveCeramicRollCovering
Passive Anti-Static Products
Tinsel Tinsel Bars
Cord Cord Mounting
Kit
FlexCord FlexCord
Mounting Kit
• Conductive rubber material to reduce anti-static build up
• Excellent heat resistance
• Easy installed in plant
• Eliminates two-way shipping and need for spare rollers
• Soft rubber surface to prevent scratching and marring of
substrates
• 1-8” diameter
JemmStat CRS 100 Conductive Rubber Sleeve
Mounting
Magnets
Nylon Brushes
JemmStat
Static Meters &
More
15. JemmStat CRS100
HIGH RELEASE, CONDUCTIVE,
SILICONE RUBBER ROLL COVERINGS
Jemmco, LLC
10936 North Port Washington Road Mequon, WI 53092-5031
Phone: 262-512-9559 Fax: 262-478-1306
www.jemmco.com
JemmStat CRS100 High Release, Conductive Rubber Roll
Coverings offer good release properties, high conductivity, low
volume resistivity, excellent wear resistance, and anti-static features
making them ideal for applications processing delicate webs in need
of reducing static build-up. Common applications include bowed
rolls, idler roll covers, mill roll core covers and more.
Properties
JemmStat CRS100 High Release, Conductive Rubber Roll Coverings are part of our full line
of JemmStat Anti-Static Products and Static Metering Devices. To learn more about these
and other unique products, call us:
Property Test Method Unit JemmStat CRS 100
Hardness Shore A DIN 53 505 70
Appearance Black
Specific Gravity DIN 53 479 A g/cm3
1.16
Tensile Strength DIN 53 504 S 1 N/mm2
6.2
Elongation at Break DIN 53 504 S 1 % 260
Tear Strength, Die B ASTM D 624 B N/mm 13
Volume Resistivity DIN IEC 93 Ω cm 1.6
Compression Set DIN ISO 815-B (22 h /
175°C)
% 34
These values are intended as a guide and should not be used in preparing specifications.
Features
Custom-made in diameters of 1” to 8”
Provide excellent wear resistance
Won’t scratch or mar surface
Easy, on-site installation
Eliminates the need for spare rollers
High conductivity
Good heat resistance
2 mm (.078”) wall thickness
16. JemmStat CHS100
HIGH RELEASE, CONDUCTIVE
PTFE HEAT SHRINK ROLL COVERINGS
Jemmco, LLC
10936 North Port Washington Road Mequon, WI 53092-5031
Phone: 262-512-9559 Fax: 262-478-1306
www.jemmco.com
JemmStat CHS100 High Release, Conductive PTFE Heat
Shrink Coverings offer excellent release properties, chemical
resistance, wear resistance, and anti-static features making them
ideal for many web processing applications. Common applications
include idler rolls on coating and laminating lines, printing press
idler rolls, slitting lines, foil processing lines, papermaking on
bowed roll covers and more.
Features
Manufactured with a .060” wall thicknesses
Supplied as a bondable covering with adhesive as a standard
Custom-made in diameters of 5” to 15’
Provide excellent wear resistance
Proven to last at least 4-10 times longer than standard FEP heat shrink sleeves
Can withstand continuous operating temperatures up to 400° F and short periods up to 550°F
Easy, on-site installation
Physical Properties
Diameter Range 5” to 15’
Thickness Range .060”
Ultimate Tensile Strength 3000 psi
Elongation 100% ASTM D882-61T
% Diameter Shrinkage @ 300ºF 10% minimum
Flammability Non-Flammable
C.O.F. (against wet polished steel) .04-.08
Color White
Chemical Properties
Effects of all acids None
Effects of all alkalies None
Effects of all organic solvents None
H²O absorption, 1/8” thickness <0.01%
Electrical Properties
Surface Resistivity 107-109 ohms/sq. in.
JemmStat CHS100 High Release, Conductive PTFE Heat Shrink Coverings are part of our
full line of JemmStat Anti-Static Products and Static Metering Devices. To learn more about
these and other unique products, call us:
17. JemmTac
Web Cleaning Equipment
Highly Effective, Economical & Space Efficient Solutions to Your Web Cleaning Issues
Jemmco offers a variety of different contact web cleaning equipment designs to satisfy a broad
range of web cleaning applications. Primarily, these designs fall within our Component Style
(as displayed), which mounts over an existing contact cleaning roll or idler roll covered with a
JemmTac Web Cleaning Sleeve, or our complete System Style Web Cleaners.
The heart of any contact web cleaner is the contact cleaning roll. All JemmTac Contact Web
Cleaning Equipment are designed to incorporate our proprietary JemmTac Web Cleaning Sleeve,
which is a highly effective and economical contact cleaning roller covering.
Component Style Web
Cleaner
• Full contact/transfer web
cleaning system
• Removes contamination down
to micron levels
• Minimal maintenance and
operating costs
• Available in multiple cleaning
widths up to 80”
• Easy installation by bolting
onto existing equipment
• Single and Double side
cleaning systems available
• Designed to mount over most
competitors’ existing contact
cleaning roller
System Style Web Cleaner Bonded Web Cleaner
• Full contact/transfer web
cleaning system
• Removes contamination down
to micron levels
• Minimal maintenance and
operating costs
• Mounted in any orientation
• Available in multiple cleaning
widths up to 80”
• Self Contained Units and
Modular Upgrade Designs
• Easy installation with small
machine footprint
• Single and Double side
cleaning systems available
• Full contact/transfer web
cleaning system
• Single and Double side
cleaning systems available
• High-performance elastomer
rollers & pre-sheeted
Adhesive Rolls
• Designs available in multiple
cleaning widths up to 120”
• Integral telescopic slides for
side access to the pre-sheeted
roll(s)
• Passive static elimination
system - active system
optional
JemmTac JemmTac JemmTac
P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
18. JemmTac
Component Style Web Cleaners
The Most Simple, Cost Effective & Space Efficient Solution to Your Web Cleaning Issues
Web
Existing idler roller fitted with our
JemmTac Web Cleaning Sleeve
Pre-sheeted
adhesive roll
The Concept Behind The JemmTac Component Web Cleaner
JemmTac Component Style Web Cleaners can be mounted over most existing idler rolls, with a silicone based contact
cleaning roller covering. Designed to be compact, the JemmTac Component Style Web Cleaner, employs pneumatic actua-
tors to move the JemmTac Pre-Sheeted Adhesive Roll in to and out of contact with the contact cleaning roller. This ena-
bles the JemmTac Component Style Web Cleaner to be mounted in a 7” x 7” footprint, with any orientation.
A silicone based contact cleaning roller (CCR) covering, such as our JemmTac Web Cleaning
Sleeve, is applied to an existing idler roller. The JemmTac Component Web Cleaner is then
mounted so that the JemmTac Pre-Sheeted Adhesive, which is housed in the JemmTac
Component Web Cleaner, is capable of nipping onto the opposite side of the contact cleaning roll
that the web passes over, as shown in the picture. The JemmTac Component Web Cleaner is then
able to move the adhesive roll in to and out of contact with the CCR, for line stoppages, sheet removal
and JemmTac Pre-Sheeted Adhesive roll replacement.
The JemmTac Component Web Cleaner can easily be
bolted on to most equipment using existing machine end frames.
The JemmTac Component Web Cleaner features a simple,
easy access latch design, which enables the operator to replace
adhesive rolls quickly and easily. It relies on pneumatics to move
the adhesive roll into and out of position either automatically
with the line, or manually by the operator. Thus, the system only
requires a clean, oil free compressed air supply and a 115V
power line. JemmTac Component Style Web Cleaners are
available in even sizes from 6” to 80”.
JemmTac Component Web Cleaners are ideal for use with the JemmTac Web Cleaning
Sleeve but can be used with other silicone based contact cleaning roller coverings. JemmTac
Component Web Cleaners can be installed at the same time as the contact cleaning roller or at
a later date, making them the most flexible web cleaner on the market today. Best of all, when used
with our JemmTac Web Cleaning Sleeve they are the most economical, efficient approach to
cleaning moving webs.
Jemmco, LLC
10936 North Port Washington Road Mequon, WI 53092-5031
Phone: 262-512-9559 Fax: 262-478-1306
www.jemmco.com
For more information contact:
19. JemmTac
System Style Web Cleaners
The Most Simple, Cost Effective & Space Efficient
Solution to Your Web Cleaning Needs
JemmTac Component Style Web Cleaners
* Full contact/transfer web cleaning system * JemmTac Web Cleaning Sleeve
* Removes contamination down to micron levels * Easy installation with small machine footprint
* Minimal maintenance and operating costs * Automatic ON/OFF operation
* Single and Double side cleaning available * Optional static elimination system available
* Available in multiple cleaning widths up to 80” * Jemmco EZ Sleeve Rollers
The heart of our system style web cleaners is the
JemmTac Web Cleaning Sleeve. A unique,
proprietary rubber covering, that features a soft tacky
surface proven to be capable of picking off dirt and
contaminants from moving webs without scratching or
marring the substrate.
The JemmTac System Style Web Cleaners features a simple, easy access latch design, which enables the op-
erator to replace adhesive rolls quickly and easily. The unit relies on pneumatics to move the adhesive roll into and out
of position either automatically with the line, or manually by the operator. Thus, the system only requires a clean, oil
free compressed air supply and a 115V power line. JemmTac System Style Web Cleaners are available in single
sided and double sided configurations and in even lengths from 6” to 80”.
Jemmco, LLC
10936 North Port Washington Road Mequon, WI 53092-5031
Phone: 262-512-9559 Fax: 262-478-1306
www.jemmco.com
The JemmTac Component Style Web Cleaner, which
houses a JemmTac Pre-Sheeted Adhesive Roll is mounted
over the JemmTac Web Cleaning Sleeve covered EZ Sleeve
Roller and attached to our durable end plates. The adhesive
roll, housed in the JemmTac Component Style Web Clean-
er, makes contact with the backside of the JemmTac Web
Cleaning Sleeve, picking off the dirt and contaminants from
the web cleaning sleeve. Once the sheet is filled with dirt, the
operator simply removes the old sheet to expose a new surface.
JemmTac System Style Web Cleaners are an excellent method of continu-
ously removing loose dirt and contaminants from moving webs. Jemmco offers a
complete line of JemmTac System Style Web Cleaners , to meet a wide range
of applications. All of our JemmTac System Style Web Cleaners feature the
unique advantages of our proprietary JemmTac designs and components.
The JemmTac Web Cleaning Sleeve is
installed on to a Jemmco EZ Sleeve Idler
Roller, simplifying sleeve installation and
replacement.
Jemmco EZ Sleeve Rollers feature
predrilled air holes in the roller body to
direct airflow and an air hose connection
so that sleeve installation is easy.
For more information contact:
20. Jemmco, LLC
10936 North Port Washington Road Mequon, WI 53092-5031
Phone: 262-512-9559 Fax: 262-478-1306
www.jemmco.com
JemmTac
Web Cleaning Sleeves
JemmTac is composed of a proprietary material which features a unique surface property that is capable of easily picking
off surface dirt and contaminants from moving substrates, making it ideal for use as a web cleaning roll covering. Unlike
conventional contact cleaning roller (CCR) coverings, JemmTac Web Cleaning Sleeves are installed in-plant eliminat-
ing the cost of two way shipping and the need for spare rollers.
Costing less than 25% of the price of most conventional contact cleaning rolls (CCR), and
less than the cost of one conventional CCR regrind, JemmTac Web Cleaning Sleeves
are proven to be a highly effective approach to making web cleaning affordable.
JemmTac Web Cleaning Sleeves are an economical approach to clean moving
substrates. For about the same cost as a typical roller regrind, JemmTac Web
Cleaning Sleeves are the ideal answer to making web cleaning affordable.
JemmTac
Web Cleaning Systems
JemmTac
Web Cleaning Sleeves
Easy to install over existing
idler rolls
Rugged support beam simply bolts on to
host machines existing end frames
Chemically matched,
wound on 3” cores
JemmTac
Pre-Sheeted Adhesive Rolls
Since JemmTac Web Cleaning Sleeves are designed to be installed over existing
idler rolls, there is no need to alter web paths or add additional rollers to the line. The
sleeve is installed using compressed air to easy mount over the existing idler roll.
JemmTac Web Cleaning Sleeves are available lengths cut to the desired size or in 10 meter long rolls. These
sleeves are stocked in a wide range of sizes, which are designed to fit the following idler roll diameters:
1.0”,1.5”,2.0”,2.5”,3.0”, 3.5”,3.75”,4.0”,4.5”,5.0”,5.5”,6.0”,7.0”and 8”. JemmTac Web Cleaning Sleeves are also
available in sizes designed for Metric rollers as well.
JemmTac Web Cleaning Systems and Supplies
JemmTac Web Cleaning Sleeves are:
Highly Effective Contact Cleaning Roll
Extremely Economical
Easy To Install
Eliminates Two Way Shipping
Installs Over An Existing Idler Roll
Available In A Wide Range Of Sizes
Easy To Clean
21. Jemmco, LLC
10936 North Port Washington Road Mequon, WI 53092-5031
Phone: 262-512-9559 Fax: 262-478-1306
www.jemmco.com
JemmTac
Web Cleaning Accessories
Unlike conventional roller coverings, JemmTac Web Cleaning Sleeves are installed
over an existing idler roll, in-plant eliminating the cost of two way shipping and the need for
spare rollers. They can be cleaned with isopropyl alcohol and water or with our
JemmTac Pre-Sheeted Adhesive Rolls and Web Cleaners for more continuous clean-
ing requirements.
JemmTac Web Cleaning Sleeves are a highly effective, economical approach to clean moving
substrates. For about the same cost as a typical roller regrind, JemmTac Web Cleaning Sleeves
are the ideal answer to making web cleaning affordable. JemmTac is composed of a proprietary
material which features a unique surface property that is capable of easily picking off surface dirt and
contaminants from moving substrates, making it ideal for use as a web cleaning roll covering.
JemmTac Web Cleaning Sleeves can be used independently on existing idler rolls or in conjunction with our
automatic JemmTac Web Cleaning Systems for a more continuous operation.
JemmTac Web Cleaning Sleeves are available lengths cut to the desired size or in 10 meter long rolls. These
sleeves are stocked in a wide range of sizes, which are designed to fit the following idler roll diameters: 1.0”, 1.5”, 2.0”,
2.5”, 3.0”, 3.5”, 3.75”, 4.0”, 4.5”, 5.0”, 5.5”, 6.0”,7.0”and 8”. JemmTac Web Cleaning Sleeves are also available in
sizes designed for Metric rollers as well.
JemmTac Web Cleaning Roller Coverings
JemmTac Pre-Sheeted Adhesive Paper Rolls
JemmTac B Bonded Contact Cleaning Roller Coverings
are bonded to the roller making them ideal for nip applications. The material is specially
formulated to create a surface capable of picking off very small particles and contaminants, from
moving webs and substrates. The unique surface is capable of performing in the most difficult
web cleaning applications and will stand up to any other CCR roller on the market today.
JemmTac Pre-Sheeted Adhesive Rolls feature a simple, efficient means of removing
dirt and contaminants from silicone based contact cleaning rollers. These pre-sheeted adhesive
rolls act as a strong storage reservoir for the contamination removed from the web and keeps
the contact cleaning roller in optimal working condition for extended periods of time.
Formulated specifically for contact web cleaning applications our JemmTac Pre-Sheeted
Adhesive Rolls eliminate the need for operators to use knives to remove the used paper,
this patent applied for design, is proven to be safer, easier to use and less wasteful then the
more conventional methods. Each adhesive roll contains 68 sheets, eliminating the possibility
of excess waste and scrap. JemmTac Pre-Sheeted Adhesive Rolls are supplied on 3”
diameter plastic cores.
JemmTac Handheld Web Cleaning Rollers
Jemm-Tac Handheld Rollers and are available for off-line, stand-alone and low volume
applications. Jemm-Tac Handheld rollers utilize a 1” diameter x 12” long plastic roller
covered with our Jemm-Tac Web Cleaning Sleeve. They are supplied with a 12” long
removable aluminum tube rod with an ergonomic insulated full grip handle for easy use. The
Jemm-Tac Web Cleaning Sleeve can be easily cleaned with isopropyl alcohol and water or
with our Jemm-Tac Pre-Sheeted Adhesive Paper.
22. Jemmco
Idler Rolls & Roller Cores
P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
LIVE SHAFT IDLER ROLLS
• Custom designed precision
live shaft rollers
• Sizes range from 3” in
diameter up to 24” in
diameter and up to 160”
long
DEAD SHAFT IDLER ROLLS STANDARD & CUSTOM
DESIGNS
• Custom and standard dead
shaft idler roll designs
• Sizes range from 3” in
diameter up to 10” in
diameter and up to 160”
long
• Both standard and custom
designs available to meet a
wide range of applications
• All of our precision
machined rolls are
custom balanced to a G
6.3 specification at 1,000
feet per minute (unless
otherwise specified)
Jemmco offers a full line of precision rollers for the transport of paper, film, foil and non-woven
webs. Our line includes live shaft rolls, dead shaft rolls, tendency driven rolls, corona treater rolls
and other custom or specialty roller cores. Whether it’s a steel, stainless steel, aluminum or
engineered composite roller, Jemmco is your source for Idler rolls and roller cores.
Jemmco Jemmco Jemmco
EZ SLEEVE ROLLERS (On Display)
• Simplify the installation of roller sleeves
• Available in live shaft or dead shaft configurations
• Feature air holes on one side of the roll to channel
the air flow needed to inflate the rubber sleeve
• Threaded hole on the header for attaching your air
source to the roller body
Jemmco
23. Jemmco, LLC
Jemmco, LLC
10936 North Port Washington Road Mequon, WI 53092
Phone: 262-512-9559 Fax: 262-478-1306
www.jemmco.com
Custom and Specialty Roller Sleeves
Jemmco can provide a variety of
custom sleeves and roller coverings
for a number of different extrusion
and converting applications.
Jemmco Inspection Sleeves
Jemmco developed a line of sleeves featuring clean
solid white and 240 gray colored sleeves which provide
excellent background contrast for inspection equipment
and for applications requiring reduced glare from metal
rollers. Jemmco Inspection Sleeves are available in a
wide range of sizes from 1.5” to 8” diameter but are
currently stocked in 3” and 4” diameter only. These sleeves
are sold by the desired length or in 10 meter long (394”)
rolls.
Jemmco Wool Sleeves
Jemmco Wool Sleeves are ideal for blown film
extrusion collapsing frame and bubble cage guide rolls.
Jemmco Wool Sleeves provide a soft, non-scratching
surface to help guide film through the cage and tower.
Jemmco Wool Sleeves are custom made for each
application and are available in a wide range of sizes.
Jemmco Custom Sleeves
Jemmco High Voltage Tubing
Jemmco High Voltage Tubing provides excellent added
insulation to high voltage corona treater wire. This tubing has proven
itself to be sufficient in reducing the amount of power bleeds in
corona treating applications. This tubing is available in a wide range
of sizes and is made custom to meet the needs of each varying wire
size.
Jemmco can supply a wide range of custom made sleeving and
profiles for a number of different applications. We offer a wide
range of sizes and lengths as well as a number of different rubber
materials.
24. Jemmco, LLC
10936 North Port Washington Road Mequon, WI 53092-5031
Phone: 262-512-9559 Fax: 262-478-1306
www.jemmco.com
Opacity MeterElmendorf Tear
Tester
Force Test
Stand
Offline Thickness
Gauges
COF Testers
Laboratory
Sample Cutters
Jemmco, LLC
Quality Control Equipment & Supplies
Jemmco, LLC offers a full line of Quality Control Equipment, Accessories and
Supplies intended to meet the needs of plastic film and sheet manufacturers.
Dyne Pens Adhesion & Release
Test Tape
Tensile Tester
Jemmco’s line also includes Film Shrinkage and Shrink Force Testers,
Melt Flow Indexers, Viscosity Cups, Adhesion Test Tape and more.
Contact us for all of your research and quality control testing needs.
Force
Tensiometers
Optical Tensiometers & Contact
Angle Measuring Devices
Dyne Solutions
25. Jemmco
Dyne Test Products & Accessories
P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
• Accu-Flo Dyne Pens
• Complete Accu-Flo Dyne Pen Set
• EZ-Read Poly Test Pens
• Dyne Test Solutions
• Dyne Test Solution Starter Kit
• Draw Down Kit
• Draw Down Replacement Rods
• Accu-Flo Jumbo Dyne Pens
• Replacement Tips (Jumbo Pens)
• Cotton-Tip Swabs
• Replacement Rods
• Empty Bottles (Standard, Dropper, Accu-Flo)
Jemmco is a leading manufacturer of Dyne Test Products and accessories. Jemmco has developed
a wide variety of Dyne Pen styles to meet the wide range of applications required by our
customers. From the popular Accu-Flo Dyne Pens to the EZ Read Poly Test Pens, Jemmco’s pens
are made fresh to ensure the highest quality. In addition, Jemmco offers solutions in all levels
ranging from 30 up to 70 dyne in addition to a wide array of dyne testing accessories.
26. Jemmco, LLC
Maintenance & Supply Products
Jemmco’s line of maintenance and supply products provide all of the vital supplies needed
by most paper. film, foil, narrow web and converting customers to keep their equipment
running at optimal efficiency.
P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
• Treater Roll Cleaning Solutions
• Little Effort All Purpose Cleaner
JemmClean Cleaning Solutions
• Copper Gauze
• Copper Pads
• Nylon Scrubbing Pads
• Nylon Cleaning Pads
• Brass Scrapers
JemmClean Cleaning Cloths, Pads & Brushes
• Anti-Static Tinsel & Tinsel Bars
• Anti-Static Cord, FlexCord & Mounting Kits
• Anti-Static Brass & Nylon Brushes
• Static Meters & Neon Bar Checkers
JemmStat Passive Anti-Static Products
• Anti-Static Bars
• Power Supplies & Controllers
JemmStat Active Anti-Static Products
27. JemmClean
Cleaning Products
P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
COPPER GAUZE
• Ideal for cleaning hot metal
parts
• Supplied in double thick
100ft or 400 ft rolls
COPPER PADS NYLON SCRUBBING &
CLEANING PADS
• Eliminate hard to remove
dirt and build-up from
machine parts and hard
surfaces
• Two nylon cleaning options
for general purpose and
removing dirt and buildup
on odler rolls, ceramic and
glass treater rolls.
Jemmco has developed a full line of cleaning solutions and products designed to meet the
needs of the film extruder and paper, film and foil converter.
JemmClean JemmClean JemmClean
XDS EXTRUDER DIE SOAP
• Custom designed precision
live shaft rollers
• Sizes range from 3” in
diameter up to 24” in
diameter and up to 160”
long
TREATER ROLL CLEANING
SOLUTION & CONCENTRATE
ALL PURPOSE CLEANER
• Neutral pH aqueous-based
cleaning solution
• Removes dirt and
contaminants produced in
corona treating process
• For use on all Corona
Treating roller coverings
• Aqueous solution
containing surfactants
• Excellent cleaner for the
office and factory
• Degreaser and all
purpose cleaner for
plastic, washable painted
surfaces, shop floors, metal
products, glass & mirrors
JemmEx JemmClean TR Little Effort
28. JemmStat
Passive & Active Anti-Static Products
P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
Flex Cord & Mounting Kits Anti-Static Brass &
Nylon Brushes
Static Meters & Neon Bar
Checkers
JemmStat JemmStat JemmStat
Anti-Static Tinsel Anti-Static Tinsel Bars Anti-Static Cord &
Mounting Kits
JemmStat JemmStat JemmCord
Model 400 High
Performance Bar
Model 200 Power Supply
JemmStat JemmStat
NEOS ACtive Static Bar Model XR@ Pulsed DC Extended
Range ionization Bar
Model 3750 Pulsed DC
Controller
JemmStat JemmStat JemmStat
DC ACTIVE STATIC BARS & CONTROLLERS
PASSIVE ANTI-STATIC PRODUCTS
AC ACTIVE STATIC BARS & POWER SUPPLIES
29. Jemmco, LLCJemmco, LLCJemmco, LLCJemmco, LLC
10936 North Port Washington Road, Mequon, WI 53092-5031
Phone: 262-512-9559 Fax: 262-242-0432
www.jemmco.com
JemmStatJemmStatJemmStatJemmStat
ACTIVE ANTI-STATIC PRODUCTS
The Model 200 is the Industry’s most popular mid-range style (1”- 3”) shockless static eliminating bar. With
the Model 200 Power supply and Model 200 Anti-Static Bar, additional bars can be operated in parallel or
added by using cables to connect from the end of one bar to another (in series).
The Model 200 is available in Four configurations, in lengths from 3” to 120”.
Model 200 Single-Scan-Single row of emitters.
Model 200 Dual-Scan-Two rows of emitters set 180° apart.
Model 200 Wide-Scan-Two rows of emitters
Model 200 Air-Bar-Couples the high performance of the Wide-Scan bar with compressed air emitting tubes.
Model 200 Power Supply
ModelXR2 Pulsed DC Extended Range Ionization
Bar
Multiple Length Units, Easy to Install & Maintain: Model XR2 can be installed
simply and flexibly to meet a variety of applications. Models are available in
10", 20", 30", 40", 50", 60", 70", 80", 90", 100" and 110" lengths. The Model
XR2 is easy to maintain, has replaceable points, and offers time-proven depend-
ability and long-life. Multiple units may be connected and powered by a single
standard electrical source. IonStorm XR2 combines economy with maximum
performance. A two year limited warranty and expert technical assistance are
Model 3750 Pulsed DC Controller
JemmStatJemmStatJemmStatJemmStat Anti-Static Bars
JemmStatJemmStatJemmStatJemmStat Power Supplies and Controllers
The Model 3750 Pulsed DC Controller offers maximum ion stream, adjustability of voltage,
frequency and polarity, plus lockable settings, to provide the exact level of static elimination
you need. Combined with the Model XR2 Anti-Static Bar, this system emits pulsing waves of
ions from dedicated negative and positive emitters, making it possible to eliminate static
buildup from over a distance of over 36”.
Input voltage: Standard 115 V 50/60 Hz, optional 230 V 50/60 Hz, standard 24 V DC. Out-
put voltage: Variable 0-14 kV. DC. Amperage: 35-volt amps starting load; 7-volt amps run-
ning load. Alarm indicator light: Flashes to indicate warning and service needed conditions.
Remote control: Remote on/off and alarm signals available through DIN connector.
The Model 200 Power Supply can be used with either the Model 200 Series or the Model 400 Series Anti-Static Bars.
Two bars can be operated (in parallel) directly from a single power supply.
The Model 200 utilizes a high quality power supply, which can run two bars for multiple bar or multiple machine
installations.
Model 400 High Performance Bar
Compatible with most power supplies from 4 Kilovolts to 8 Kilovolts.
The Model 400 employs resistively coupled Shockless emitters for maximum
performance, neutralizing at high speed and high charges. This bar is available
in lengths 2” to 72” in one-inch increments.
Model 200 AC Static Elimination Bars
30. A New Evolution in Static Control—
Highest Level of Intelligence and Performance
NEOS technology is an evolution in static controls providing ultra-high performance of up to 250%
compared to competitive products. Design for the most demanding static elimination applications.
static charged surface and then increases the supply of static neutralizing ions of the opposite polarity
until the charge is neutralized.
NEOS technology provides process security for static critical applications by monitoring the Bars
operational status and indicating whether it needs cleaning or other maintenance.
JemmStat NEOS Static Bars are powered by 24 volts DC. All ionizing and sensing electronics are enclosed
within the Bar. The bars have reinforced housings for years of durability.
• Ultra-high static elimination performance for most demanding applications
• Uses NEOS Reactive Intelligence – 2 auto & 3 manual settings for optimal control
• Remote and local monitoring of power status and “Clean Me”function
• Static neutralizing performance across full length of bar
• Shockless with durable tungsten emitters
• Reinforced bodies for durability with IP67 fully sealed protection
• 24VDC Supply. Source: PLC or Optional 110/220V power pack
•
BENEFITS
• Increase production
speeds
•
• Reduce rejects
• Reduce downtime
• Enhance product
quality
• Enhance operator
safety
APPLICATIONS
• Packaging
• Printing
• Converting
• Extruding
• Material Handling
JemmStat
NEOS Active Static Bars
P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
31. EXPERT TECHNICAL ASSISTANCE • 2 YEAR LIMITED WARRANTY
NEOS 20
• Designed for medium
range distances of 6" to 30"
with automatic distance
compensation using the NEOS
sampling technology
NEOS 12F
• Designed for very high speed
applications operating at
distances of 1" to 4"
• At a distance of 2" it can
control static at speeds of
up to 6000 ft per minute,
reducing a 50kV charge to
below 1kV
NEOS 30
• The most powerful long
range static eliminator bar—
applications
• Operates at distance from 8"
to over 40" using the Reactive
Intelligence technology
• Unit can be switch to manual
mode (non sampling) to
extend its performance to
distances up to 80"
MOUNTING:
Each slide has 2 x M6 40mm studs.
NEOS INTELLIGENCE:
The rotary switch at the cable end of the bar gives the
operator full control over the NEOS bar. The default
factory setting is AUTO NORMAL for intelligent operation.
AUTO LONG may be chosen if the operating distance is
always toward the long end of the range. The customer
the bar as a standard static eliminator. There are 3 manual
settings for Short, Medium and Long Range Operation.
Specifications
B A
C
DIMENSIONS:
Bar Dimensions: A B C
NEOS 12 up to 85" 1" 1.8"
NEOS 20 up to 88" 1.1" 2.6"
NEOS 30 up to 88" 1.3" 3"
ACCESSORIES:
Cable with 180° connector available in lengths of
3m, 5m, 7.5m, and 10m.
Cable with 90° connector available in lengths of
3m, 5m, 7.5m, and 10m.
NEOS AC/DC 24V Power Supply 1.6"
1.5"
1.2"
P: 262.512.9559 • F: 262.478.1306 • www.jemmco.com
10936 N Port Washington Road, Mequon, WI 53092
32. Jemmco, LLCJemmco, LLCJemmco, LLCJemmco, LLC
10936 North Port Washington Road, Mequon, WI 53092-5031
Phone: 262-512-9559 Fax: 262-242-0432
www.jemmco.com
JemmStatJemmStatJemmStatJemmStat
PASSIVE ANTI-STATIC PRODUCTS
JemmStatJemmStatJemmStatJemmStat Anti-Static Tinsel is high quality, all copper and an ideal solution for reducing unwanted static
build up in paper, film and foil converting operations.
JemmStatJemmStatJemmStatJemmStat Anti-Static Tinsel is available in 72 foot long rolls.
JemmCordJemmCordJemmCordJemmCord Anti-Static Cord is constructed of highly conductive Thunderon Fibers. These microfibers provide
thousands of conductive micro points which enable excellent ground paths to dissipate static build up.
JemmCordJemmCordJemmCordJemmCord Anti-Static Cord is available in rolls of 25 meters or rolls of 300 meters.
JemmStatJemmStatJemmStatJemmStat Anti-Static Brass Brushes are high quality brass bristles mounted in a hardwood
holder. They are simple to clean and easy to maintain.
JemmStatJemmStatJemmStatJemmStat Anti-Static Brass Brushes are available in lengths 6” to 60” in ten inch increments.
JemmStatJemmStatJemmStatJemmStat Anti-Static Tinsel Bars provide ridged support to copper tinsel. These bars are
available in 1” increments from 6” to 96”.
JemmStatJemmStatJemmStatJemmStat Monitoring Devices
JemmStatJemmStatJemmStatJemmStat Static Meters are precise, state of the art, lightweight, handheld field meters for measuring
magnitude and polarity of electrostatic potential. The primary features include stabilized sensors, quick
responses and long term accuracy. Our higher end models include pulsing-beam range finder to insure
consistent measuring distances.
JemmStatJemmStatJemmStatJemmStat Model 9195 Neon Bar Checker quickly and inexpensively checks proper function of
Ionizing Bars.
JemmStatJemmStatJemmStatJemmStat Anti-Static Nylon Brushes are composed of conductive nylon fibers mounted
in an anodized aluminum holder. The soft nylon fibers make them ideal for use on films and
foils. They are available in lengths from 6” to 60”, in 6” increments.
JemmStatJemmStatJemmStatJemmStat Anti-Static FlexCord is constructed of highly conductive Thunderon® elastic fibers that provide
thousands of conductive micro points which provide excellent paths to ground in order to dissipate static buildup.
JemmStatJemmStatJemmStatJemmStat Anti-Static FlexCord is capable of stretching 100 times its relaxed length to simplify installation.
JemmStatJemmStatJemmStatJemmStat Anti-Static FlexCord is available in rolls that are 32.5 feet long.
JemmCordJemmCordJemmCordJemmCord Anti-Static Cord Mounting Kit consists of one 25 meter long roll of JemmCordJemmCordJemmCordJemmCord Anti-Static
Cord and four 1.2 inch diameter round 5 pound pull magnets for simple installation and safe use of JemmCordJemmCordJemmCordJemmCord
Anti-Static Cord.
JemmStatJemmStatJemmStatJemmStat Anti-Static FlexCord Mounting Kit consists of one 32.5 foot long roll of JemmStatJemmStatJemmStatJemmStat Anti-Static
FlexCord and four 1.2 inch diameter round 5 pound pull magnets for simple installation and safe use of
JemmCordJemmCordJemmCordJemmCord Anti-Static Cord.
JemmStatJemmStatJemmStatJemmStat Anti-Static Mounting Magnets consists of Ten 1.2 inch diameter round 5 pound pull magnets for
simple installation and safe use of most passive anti-static products on the market. Highly recommended for cord
or tinsel installations involving moving webs, as this enables it to cleanly break free as needed