The document provides the resume of Jean Claude MBOUNGOU, an instrumentation and process control professional with over 9 years of experience in the oil and gas sector in Gabon. He has extensive skills in process instrumentation, control systems, safety instrumentation, and maintenance. His experience includes roles as an instrumentation technician, process operator supervisor, and maintenance positions for companies including VAALCO, EMA, Exterran, and Total Gabon. He has training in areas such as SAP, process safety, instrumentation, and first aid.
This document provides a summary of Lakhdar Mekki's qualifications and experience as a Senior Process Operator. Mekki has over 48 years of experience in Algeria and Qatar working in LNG, LPG, and condensate recovery plants. He has extensive experience in plant start-up, shutdown, and commissioning procedures, and safety and emergency response. Mekki is seeking a challenging position as a panel operator or supervisor where he can continue growing professionally.
This document provides a summary of Jose Gerardo Velez's professional experience. He has over 23 years of experience in the electronics manufacturing industry, specializing in printed circuit board assembly processes. His most recent role was as a Production Supervisor at TTElectronics, where he oversaw manufacturing operations and personnel. Prior to that, he held several Process Engineering roles at various electronics manufacturing companies, where he was responsible for tasks like process improvement, quality control, and new product introduction. He has a Master's degree in Electronic Technology and speaks English, Spanish, and German.
This document contains the resume of Avinash B, an automation engineer with over 6 years of experience in power plant maintenance, commissioning, and operations. He has spearheaded installation, calibration, and maintenance of various instrumentation systems like gas analyzers, weather monitoring systems, and DCS. He is proficient in PLCs, process instrumentation, and has experience working with control systems from manufacturers like Foxboro, Allen Bradley, and Schneider. His career includes roles supporting aircraft simulators, process plants, and serving as a senior engineer at a gas analyzer company. He holds a diploma in electronics and has attended various technical trainings.
The relayr Performance Optimization Solution creates a score that quantifies the productivity of planned production time in an industrial process. By capturing data from sensors within the industrial process equipment, the solution can benchmark and analyze the real-time performance of the overall process. Areas requiring improvement are then highlighted, allowing the associated equipment to be optimized. This allows operators to work towards a ‘perfect’ productivity score whilst continually monitoring how well the existing system is performing.
Moore Process Controls provides industrial automation and optimization services globally. They offer a full range of services from instrumentation to turnkey automation projects. Their expertise is in oil and gas, mining, chemicals, and other industries. They take a disciplined, documented approach to project delivery from design through commissioning to ensure quality and safety. The document provides an overview of Moore's capabilities, industries served, global operations, and examples of automation projects delivered.
Louis Laverne has over 30 years of experience in instrumentation and oilfield operations. He has worked on numerous gas, oil, and LNG projects, managing instrumentation technicians and overseeing commissioning, start-up, and plant maintenance. He is skilled at planning, scheduling, troubleshooting instrumentation systems, and developing documentation for projects.
This document provides an overview of Matrikon Moore, an industrial automation and optimization company. It details the services they provide including control systems, safety systems, instrumentation, simulation, and long-term maintenance. It describes the industries they serve such as oil & gas, mining, chemicals, and water & waste. It also outlines their global operations and project delivery approach from concept to long-term support. Examples of delivered projects including an FPSO offshore Angola project are highlighted.
Reneesh Abraham is an instrumentation and control engineer with over 5 years of experience maintaining offshore oil and gas platforms. He has specialized in operation and maintenance of process platforms, turnaround projects, and maintenance of unmanned well platforms. His responsibilities have included maintenance of field instruments, fire and gas systems, control valves, shutdown valves, and involvement in DCS and SCADA systems. He holds safety certifications from the Naval Maritime Academy and has worked as an instrumentation engineer for Keltron and Arkay Instruments on various ONGC projects.
This document provides a summary of Lakhdar Mekki's qualifications and experience as a Senior Process Operator. Mekki has over 48 years of experience in Algeria and Qatar working in LNG, LPG, and condensate recovery plants. He has extensive experience in plant start-up, shutdown, and commissioning procedures, and safety and emergency response. Mekki is seeking a challenging position as a panel operator or supervisor where he can continue growing professionally.
This document provides a summary of Jose Gerardo Velez's professional experience. He has over 23 years of experience in the electronics manufacturing industry, specializing in printed circuit board assembly processes. His most recent role was as a Production Supervisor at TTElectronics, where he oversaw manufacturing operations and personnel. Prior to that, he held several Process Engineering roles at various electronics manufacturing companies, where he was responsible for tasks like process improvement, quality control, and new product introduction. He has a Master's degree in Electronic Technology and speaks English, Spanish, and German.
This document contains the resume of Avinash B, an automation engineer with over 6 years of experience in power plant maintenance, commissioning, and operations. He has spearheaded installation, calibration, and maintenance of various instrumentation systems like gas analyzers, weather monitoring systems, and DCS. He is proficient in PLCs, process instrumentation, and has experience working with control systems from manufacturers like Foxboro, Allen Bradley, and Schneider. His career includes roles supporting aircraft simulators, process plants, and serving as a senior engineer at a gas analyzer company. He holds a diploma in electronics and has attended various technical trainings.
The relayr Performance Optimization Solution creates a score that quantifies the productivity of planned production time in an industrial process. By capturing data from sensors within the industrial process equipment, the solution can benchmark and analyze the real-time performance of the overall process. Areas requiring improvement are then highlighted, allowing the associated equipment to be optimized. This allows operators to work towards a ‘perfect’ productivity score whilst continually monitoring how well the existing system is performing.
Moore Process Controls provides industrial automation and optimization services globally. They offer a full range of services from instrumentation to turnkey automation projects. Their expertise is in oil and gas, mining, chemicals, and other industries. They take a disciplined, documented approach to project delivery from design through commissioning to ensure quality and safety. The document provides an overview of Moore's capabilities, industries served, global operations, and examples of automation projects delivered.
Louis Laverne has over 30 years of experience in instrumentation and oilfield operations. He has worked on numerous gas, oil, and LNG projects, managing instrumentation technicians and overseeing commissioning, start-up, and plant maintenance. He is skilled at planning, scheduling, troubleshooting instrumentation systems, and developing documentation for projects.
This document provides an overview of Matrikon Moore, an industrial automation and optimization company. It details the services they provide including control systems, safety systems, instrumentation, simulation, and long-term maintenance. It describes the industries they serve such as oil & gas, mining, chemicals, and water & waste. It also outlines their global operations and project delivery approach from concept to long-term support. Examples of delivered projects including an FPSO offshore Angola project are highlighted.
Reneesh Abraham is an instrumentation and control engineer with over 5 years of experience maintaining offshore oil and gas platforms. He has specialized in operation and maintenance of process platforms, turnaround projects, and maintenance of unmanned well platforms. His responsibilities have included maintenance of field instruments, fire and gas systems, control valves, shutdown valves, and involvement in DCS and SCADA systems. He holds safety certifications from the Naval Maritime Academy and has worked as an instrumentation engineer for Keltron and Arkay Instruments on various ONGC projects.
This document provides a summary of Elrique Donowin McKay's personal and professional experience. It includes details of his 44 years of experience working in various roles within the petrochemical industry in South Africa, including 26 years as an operator and production shift supervisor. He has extensive experience in plant operations, project management, safety procedures, and troubleshooting. Currently he works as a production shift supervisor at PetroSA, a petrochemical company in South Africa, where he oversees day-to-day plant operations and safety.
Osama Abdel Kelala is an experienced DCS panel operator and LNG operator currently working at the Egyptian Liquefied Natural Gas company. He has a bachelor's degree in chemistry from Alexandria University and is pursuing a master's degree in environmental studies. Osama has over 10 years of experience in commissioning, starting up, and safely operating major units and equipment at the LNG plant including the acid gas removal unit, dehydration unit, refrigerant systems, and storage tanks. He is skilled in DCS control systems, emergency response, and improving safety culture.
Luai Mohamed Mokhtar is a Senior Mechanical Maintenance Engineer seeking a new engineering position. He has over 13 years of experience in mechanical maintenance engineering, including his current role at Air Liquide Egypt since 2008. He holds a Bachelor's degree in Mechanical Power Engineering from Ain Shams University and is a certified vibration analyst. Luai is proficient in maintenance management systems, budgeting, and leading teams on major overhaul projects.
This document is a resume for Mahmood Ahmed Brashi. It summarizes his objective of seeking a new career in instrumentation and control systems. It details his educational background of an Associated Degree in Instrumentation Technology from Yanbu Industrial College. It provides an extensive work experience summary of over 8 years working in instrumentation maintenance for petrochemical plants. It also lists his areas of expertise, skills, training courses and certifications, and references.
This document discusses Yokogawa's solutions for improving health, safety, and environmental (HSE) measures at industrial plants. It outlines various control devices, ancillary devices, and services that Yokogawa provides to help ensure plant efficiency and enhance HSE, including continuous emission monitoring, operator training simulation, regulatory control stabilization consulting, best practice pilot implementation, and alarm rationalization. The solutions help maintain safety, stability, and protect the environment while complying with regulations. Total integration of HSE solutions with distributed control systems, manufacturing execution systems, and enterprise resource planning software is also highlighted.
The document discusses process development in manufacturing companies. It aims to develop efficient production processes through experiments in labs that optimize raw material use, energy expenditure, and environmental impact. The goal is to design flexible, reliable production facilities that optimally respond to market demands based on lab-scale reaction and process designs. PCS 7 LAB Collection provides control technology in labs to continuously collect experimental data to clarify inputs, optimize processes, and protect employee safety.
V. Balu is seeking a challenging position in facility management and electrical engineering. He has over 7 years of experience in facility systems including electrical, mechanical, BMS, fire safety and security systems. Currently he is a facility engineer at a large Singapore data center, leading a team that ensures 24/7 operations of the facility systems. He has a bachelor's degree in electrical and electronics engineering and is proficient in English and Tamil.
This document summarizes Setpoint Integrated Solutions, a company that provides process automation solutions. It states that Setpoint's mission is to be a premier process solutions partner by bringing together industry expertise and world-class products into fully integrated solutions. Setpoint has engineers, technicians, and subject matter experts to ensure customer automation needs are fully realized and supported throughout projects. It also provides state-of-the-art training facilities and an integrated technology center for hands-on experience with new technologies.
This curriculum vitae outlines Ibrahim Ali's objective of obtaining a position in a leading company to establish his career. It provides details of his education, work experience, skills and qualifications. As an automation engineer, he has over 20 years of experience working in instrumentation, distributed control systems, programmable logic controllers, and maintenance management systems. His roles have included commissioning, start up, modification, calibration and troubleshooting of industrial control systems.
Salah Mohamed Mohamed Ibrahim Taman is currently the Head Manager of the Instrumentation and Control Department at ELDelta Co. for Fertilizers Chemical Industries in Egypt. He has over 20 years of experience in instrumentation, control systems, electronics, networking and communication engineering. He received a B.Sc. in Electronics Engineering from Mansoura University in Egypt, specializing in computers and control systems. He has extensive experience working with DCS, PLC, SCADA and other process control systems. He also has skills in maintenance, calibration, programming and troubleshooting of various field instrumentation.
Bradley Butler is seeking a position that utilizes his technical background in injection molding. He has over 20 years of experience in various roles including maintenance manager, reliability maintenance engineer, process technician, and technical production supervisor. His skills include injection molding processing, machine repair, PLC programming, electrical and mechanical troubleshooting, project management, and process improvement. He holds various training certificates and is proficient in computer programs like Microsoft Office.
This curriculum vitae is for Kevin Pratt, who has over 20 years of experience as an electrician and control/commissioning engineer working with process control systems. He currently works as the director and control engineer at his own company, KP Controls, where he has worked on major projects for Diageo distilleries. Some of his responsibilities include design, documentation, programming, commissioning, training, and optimizing automation systems. He has extensive experience working with PLCs and HMIs from manufacturers such as Siemens, Allen-Bradley, and Schneider.
Nabieh Elshabrawi is an instrumentation and control engineer from Egypt, currently working at the Middle Delta Electricity Production Company in Banha Power Plant. He received a bachelor's degree in electronic engineering from Mansoura University in 2003. His responsibilities include maintenance, troubleshooting, and improvements to instrumentation and control systems such as distributed control systems, field devices, and safety equipment. He also coordinates maintenance planning and failure analysis. Elshabrawi has extensive experience in commissioning, testing, and technical support of control systems.
Khubaib Khan is an instrumentation engineer with over 10 years of experience working in fertilizer and power plants. He has expertise in DCS/PLC systems including Yokogawa Centum CS 3000 and GE Fanuc Rx3i PLC. Khan is currently an instrumentation area engineer responsible for maintenance, troubleshooting, and projects involving gas turbines, HRSGs, nitric acid plants, and CDM projects. He has received awards for his maintenance excellence and safety initiatives.
Pantec Metrology is a manufacturer of motion controllers and sensors for coordinate measuring machines (CMMs) founded in 1990 in Liechtenstein. It has 120 employees across 5 business units and customer centers in Europe and Asia. Pantec's mission is to provide innovative metrology technologies for industrial, production, and medical applications. Their product line includes Eagle and Condort motion controllers, Eaglepad and Smartpad hand controllers, temperature sensors, and the Eagle.Head probing system. Pantec also offers services like training, support, consulting, and special technical adaptations.
- Muhammad Yesrub Iqbal is seeking a position that utilizes his diverse professional experiences in electrical and instrumentation maintenance, operation, and project management.
- He has over 7 years of experience in these areas and expertise with PLCs, SCADA systems, transmitters, valves, analyzers and more.
- His experience includes roles as an Instrument Engineer at FatimaFert and Attock Cement Pakistan Limited where he oversaw maintenance, commissioning, and operations of various electrical, instrumentation and process control systems.
The document provides a summary of Shahbaz Qasim's career experience and qualifications. It summarizes his 20 years of experience in instrument and control technician roles in oil, gas and petrochemical plants in the UAE and Pakistan. It also lists his educational qualification of a diploma in electronics technology. The document is Shahbaz Qasim's application for an instrument and control technician/foreman/supervisor/trainer role where he outlines his responsibilities and experience in detail.
Clay Vaz de Lima Jr is an electrical engineer with over 35 years of experience in industrial automation and control systems. He has extensive experience designing, implementing, and commissioning distributed control systems from manufacturers such as Yokogawa, ABB, Emerson, and Honeywell. His areas of expertise include functional design, control strategy development, commissioning management, and training. He is proficient in multiple control systems including DeltaV, Centum, Infi90, and Foxboro Evo. Currently he works as a senior application engineer providing technical support, training, and advanced control solutions to various industries.
Clay Vaz de Lima Jr is an electrical engineer with over 35 years of experience in industrial automation and control systems. He has extensive experience designing, implementing, and commissioning distributed control systems from manufacturers such as Yokogawa, ABB, Emerson, and Honeywell. His areas of expertise include functional design, control strategy development, commissioning management, and training. He is proficient in multiple control systems including DeltaV, Centum, Infi90, and Foxboro Evo. Currently he works as a senior application engineer providing technical support, training, and advanced control solutions to various industries.
Yokogawa provided a CENTUM CS 3000 process control system to control the batch processes and emergency shutdown system for Aldwich Enviro-Management's waste oil to diesel plant in Malaysia. The plant processes waste oil through filtration, dehydration, cracking, distillation and other steps to produce diesel, naphtha and fuel oil. The CENTUM CS 3000 system integrates process control and safety shutdown. It has helped ensure safe and reliable operations since the plant was completed in 2005.
This document provides a summary of Elrique Donowin McKay's personal and professional experience. It includes details of his 44 years of experience working in various roles within the petrochemical industry in South Africa, including 26 years as an operator and production shift supervisor. He has extensive experience in plant operations, project management, safety procedures, and troubleshooting. Currently he works as a production shift supervisor at PetroSA, a petrochemical company in South Africa, where he oversees day-to-day plant operations and safety.
Osama Abdel Kelala is an experienced DCS panel operator and LNG operator currently working at the Egyptian Liquefied Natural Gas company. He has a bachelor's degree in chemistry from Alexandria University and is pursuing a master's degree in environmental studies. Osama has over 10 years of experience in commissioning, starting up, and safely operating major units and equipment at the LNG plant including the acid gas removal unit, dehydration unit, refrigerant systems, and storage tanks. He is skilled in DCS control systems, emergency response, and improving safety culture.
Luai Mohamed Mokhtar is a Senior Mechanical Maintenance Engineer seeking a new engineering position. He has over 13 years of experience in mechanical maintenance engineering, including his current role at Air Liquide Egypt since 2008. He holds a Bachelor's degree in Mechanical Power Engineering from Ain Shams University and is a certified vibration analyst. Luai is proficient in maintenance management systems, budgeting, and leading teams on major overhaul projects.
This document is a resume for Mahmood Ahmed Brashi. It summarizes his objective of seeking a new career in instrumentation and control systems. It details his educational background of an Associated Degree in Instrumentation Technology from Yanbu Industrial College. It provides an extensive work experience summary of over 8 years working in instrumentation maintenance for petrochemical plants. It also lists his areas of expertise, skills, training courses and certifications, and references.
This document discusses Yokogawa's solutions for improving health, safety, and environmental (HSE) measures at industrial plants. It outlines various control devices, ancillary devices, and services that Yokogawa provides to help ensure plant efficiency and enhance HSE, including continuous emission monitoring, operator training simulation, regulatory control stabilization consulting, best practice pilot implementation, and alarm rationalization. The solutions help maintain safety, stability, and protect the environment while complying with regulations. Total integration of HSE solutions with distributed control systems, manufacturing execution systems, and enterprise resource planning software is also highlighted.
The document discusses process development in manufacturing companies. It aims to develop efficient production processes through experiments in labs that optimize raw material use, energy expenditure, and environmental impact. The goal is to design flexible, reliable production facilities that optimally respond to market demands based on lab-scale reaction and process designs. PCS 7 LAB Collection provides control technology in labs to continuously collect experimental data to clarify inputs, optimize processes, and protect employee safety.
V. Balu is seeking a challenging position in facility management and electrical engineering. He has over 7 years of experience in facility systems including electrical, mechanical, BMS, fire safety and security systems. Currently he is a facility engineer at a large Singapore data center, leading a team that ensures 24/7 operations of the facility systems. He has a bachelor's degree in electrical and electronics engineering and is proficient in English and Tamil.
This document summarizes Setpoint Integrated Solutions, a company that provides process automation solutions. It states that Setpoint's mission is to be a premier process solutions partner by bringing together industry expertise and world-class products into fully integrated solutions. Setpoint has engineers, technicians, and subject matter experts to ensure customer automation needs are fully realized and supported throughout projects. It also provides state-of-the-art training facilities and an integrated technology center for hands-on experience with new technologies.
This curriculum vitae outlines Ibrahim Ali's objective of obtaining a position in a leading company to establish his career. It provides details of his education, work experience, skills and qualifications. As an automation engineer, he has over 20 years of experience working in instrumentation, distributed control systems, programmable logic controllers, and maintenance management systems. His roles have included commissioning, start up, modification, calibration and troubleshooting of industrial control systems.
Salah Mohamed Mohamed Ibrahim Taman is currently the Head Manager of the Instrumentation and Control Department at ELDelta Co. for Fertilizers Chemical Industries in Egypt. He has over 20 years of experience in instrumentation, control systems, electronics, networking and communication engineering. He received a B.Sc. in Electronics Engineering from Mansoura University in Egypt, specializing in computers and control systems. He has extensive experience working with DCS, PLC, SCADA and other process control systems. He also has skills in maintenance, calibration, programming and troubleshooting of various field instrumentation.
Bradley Butler is seeking a position that utilizes his technical background in injection molding. He has over 20 years of experience in various roles including maintenance manager, reliability maintenance engineer, process technician, and technical production supervisor. His skills include injection molding processing, machine repair, PLC programming, electrical and mechanical troubleshooting, project management, and process improvement. He holds various training certificates and is proficient in computer programs like Microsoft Office.
This curriculum vitae is for Kevin Pratt, who has over 20 years of experience as an electrician and control/commissioning engineer working with process control systems. He currently works as the director and control engineer at his own company, KP Controls, where he has worked on major projects for Diageo distilleries. Some of his responsibilities include design, documentation, programming, commissioning, training, and optimizing automation systems. He has extensive experience working with PLCs and HMIs from manufacturers such as Siemens, Allen-Bradley, and Schneider.
Nabieh Elshabrawi is an instrumentation and control engineer from Egypt, currently working at the Middle Delta Electricity Production Company in Banha Power Plant. He received a bachelor's degree in electronic engineering from Mansoura University in 2003. His responsibilities include maintenance, troubleshooting, and improvements to instrumentation and control systems such as distributed control systems, field devices, and safety equipment. He also coordinates maintenance planning and failure analysis. Elshabrawi has extensive experience in commissioning, testing, and technical support of control systems.
Khubaib Khan is an instrumentation engineer with over 10 years of experience working in fertilizer and power plants. He has expertise in DCS/PLC systems including Yokogawa Centum CS 3000 and GE Fanuc Rx3i PLC. Khan is currently an instrumentation area engineer responsible for maintenance, troubleshooting, and projects involving gas turbines, HRSGs, nitric acid plants, and CDM projects. He has received awards for his maintenance excellence and safety initiatives.
Pantec Metrology is a manufacturer of motion controllers and sensors for coordinate measuring machines (CMMs) founded in 1990 in Liechtenstein. It has 120 employees across 5 business units and customer centers in Europe and Asia. Pantec's mission is to provide innovative metrology technologies for industrial, production, and medical applications. Their product line includes Eagle and Condort motion controllers, Eaglepad and Smartpad hand controllers, temperature sensors, and the Eagle.Head probing system. Pantec also offers services like training, support, consulting, and special technical adaptations.
- Muhammad Yesrub Iqbal is seeking a position that utilizes his diverse professional experiences in electrical and instrumentation maintenance, operation, and project management.
- He has over 7 years of experience in these areas and expertise with PLCs, SCADA systems, transmitters, valves, analyzers and more.
- His experience includes roles as an Instrument Engineer at FatimaFert and Attock Cement Pakistan Limited where he oversaw maintenance, commissioning, and operations of various electrical, instrumentation and process control systems.
The document provides a summary of Shahbaz Qasim's career experience and qualifications. It summarizes his 20 years of experience in instrument and control technician roles in oil, gas and petrochemical plants in the UAE and Pakistan. It also lists his educational qualification of a diploma in electronics technology. The document is Shahbaz Qasim's application for an instrument and control technician/foreman/supervisor/trainer role where he outlines his responsibilities and experience in detail.
Clay Vaz de Lima Jr is an electrical engineer with over 35 years of experience in industrial automation and control systems. He has extensive experience designing, implementing, and commissioning distributed control systems from manufacturers such as Yokogawa, ABB, Emerson, and Honeywell. His areas of expertise include functional design, control strategy development, commissioning management, and training. He is proficient in multiple control systems including DeltaV, Centum, Infi90, and Foxboro Evo. Currently he works as a senior application engineer providing technical support, training, and advanced control solutions to various industries.
Clay Vaz de Lima Jr is an electrical engineer with over 35 years of experience in industrial automation and control systems. He has extensive experience designing, implementing, and commissioning distributed control systems from manufacturers such as Yokogawa, ABB, Emerson, and Honeywell. His areas of expertise include functional design, control strategy development, commissioning management, and training. He is proficient in multiple control systems including DeltaV, Centum, Infi90, and Foxboro Evo. Currently he works as a senior application engineer providing technical support, training, and advanced control solutions to various industries.
Yokogawa provided a CENTUM CS 3000 process control system to control the batch processes and emergency shutdown system for Aldwich Enviro-Management's waste oil to diesel plant in Malaysia. The plant processes waste oil through filtration, dehydration, cracking, distillation and other steps to produce diesel, naphtha and fuel oil. The CENTUM CS 3000 system integrates process control and safety shutdown. It has helped ensure safe and reliable operations since the plant was completed in 2005.