Professional Summary:
Gained insight and thorough understanding of FACILITATION AND HSE systems and day to day HSE operations by working with GLOBAL CONTRACTING L.L.C.(DUBAI) & RAVI GREEN ENGINEERING Pvt(PAKISTAN)Carried out site visit to ensure safety at site, highlighting potential hazards, taking preventive measures to avoid incidents and reporting unsafe occurrences and active participation in HSE review meetings
An ambitious safety Specialist seeking a full time position that will enable the utilization of acquired skill set and knowledge in safety, while allowing the opportunity to learn a new expertise.
I have worked with multiple companies with different expertise based on contract; mainly health safety and environment officer, work leader and supervisor in MLNG Petronas. Currently furthering my studies in Taylors Lakeside University pursuing Public Relations and Marketing and hope to get an opportunity for the internship most preferably Australia, Canada and Malaysia. In the meantime, I hope to look for a job opportunity if any concerning health safety and environment supervisor or officer as well.
An ambitious safety Specialist seeking a full time position that will enable the utilization of acquired skill set and knowledge in safety, while allowing the opportunity to learn a new expertise.
I have worked with multiple companies with different expertise based on contract; mainly health safety and environment officer, work leader and supervisor in MLNG Petronas. Currently furthering my studies in Taylors Lakeside University pursuing Public Relations and Marketing and hope to get an opportunity for the internship most preferably Australia, Canada and Malaysia. In the meantime, I hope to look for a job opportunity if any concerning health safety and environment supervisor or officer as well.
In the capacity of safety officer, I foresee myself as an effective contributor to any organization in its Endeavour to safety and success. I possess the interest, capacity and motivation to play an effective role in the organization I work for.
Experienced Health Safety Environment Engineer with a demonstrated history of working in the construction industry. Skilled in Hazard Identification, Industrial Safety, Legal Compliance, Electrical Safety, and Job Safety Analysis. Strong operations professional with a POST GRADUATE PROGRAMME IN HEALTH, SAFETY AND ENVIRONMENT MANAGEMENT [PGP HSEM] focused in health safety and environment management from NICMAR
My job is to ensure the Facility /Construction Site must meet all Health and Safety Standards and Facilities according to Legislation and Company Policies to fulfill this requirement, I have to perform different duties which are written in my cv
Having an overall experience of 6yrs 8months in the field of HSE, FACILITATION and SAFETY, I have an ambition to pursue my career the field of HSE and be a useful resource to a forward looking organization.
In the capacity of safety officer, I foresee myself as an effective contributor to any organization in its Endeavour to safety and success. I possess the interest, capacity and motivation to play an effective role in the organization I work for.
Experienced Health Safety Environment Engineer with a demonstrated history of working in the construction industry. Skilled in Hazard Identification, Industrial Safety, Legal Compliance, Electrical Safety, and Job Safety Analysis. Strong operations professional with a POST GRADUATE PROGRAMME IN HEALTH, SAFETY AND ENVIRONMENT MANAGEMENT [PGP HSEM] focused in health safety and environment management from NICMAR
My job is to ensure the Facility /Construction Site must meet all Health and Safety Standards and Facilities according to Legislation and Company Policies to fulfill this requirement, I have to perform different duties which are written in my cv
Having an overall experience of 6yrs 8months in the field of HSE, FACILITATION and SAFETY, I have an ambition to pursue my career the field of HSE and be a useful resource to a forward looking organization.
Having an overall experience of 9yrs in the field of HSE, FACILITATION and Administration, I have an ambition to pursue my career the field of HSE,Facilitation and be a useful resource to a forward looking organization.
Personality:
Self-driven and results-oriented with a positive outlook and a clear focus on high quality. A natural forward planner who critically assesses own performance. Mature, credible, and comfortable in dealing with all managerial levels. Reliable, tolerant, and determined. Empathetic communicator, able to see things from the other person's point of view. Well-presented and earnest. Keen for new experience, responsibility and accountability.
Professional Summary: (OIL&GAS)(Constructuon)
My job is to ensure the Facility /Construction Site must meet all Health and Safety Standards and Facilities according to Legislation and Company Policies to fulfill this requirement, I have to perform different duties which are written in my cv
NE-BOSH CERTIFIED OFFICER.(UNITED KINGDOM )
1-CERTIFIED IN CONTROLLING WORK PLACE HAZARDS.
2-CERTIFIED IN CONSTRUCTION HEALTH &SAFETY.
3-CERTIFIED IN FIRE SAFETY AND RISK MANAGEMENT.
4-CERTIFIED IN HEALTH AND SAFETY PRACTICAL APPLICATION
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
1. CV JANBAZRAZA 1
JANBAZ RAZA
HSE/SAFETY AND FACILITATION OFFICER
ADDRESS DUBAI (AL QOUZ)
CONTACT +971556806420 / +923320592477
PASSPORT CA9890572 (Work Permit)
SKYPE: janbazbutt86
EMAIL: @gmail.com
LinkedIn https://pk.linkedin.com/in/janbaz-butt-
_____________________________________________________________________________________________
Objective:
Havi ng an overal l experi ence of 6yrs i n the fi el d of HSE, FACILITATION and Admi ni strati on, I have an
ambi ti on to pursue my career the fi el d of HSE and be a useful resource to a forward l ooki ng organi zati on.
Personality:
Self-drivenandresults-orientedwithapositiveoutlookandaclearfocuson highquality. A natural forward planner who
criticallyassessesownperformance.Mature,credible, and comfortable in dealing with all managerial levels. Reliable,
tolerant, and determined. Empathetic communicator, able to see things from the other person's point of vi ew. Well-
presented and earnest. Keen for new experience, responsibility and accountability.
Professional Summary:
Gai ned i nsi ght and thorough understandi ng of FACILITATION AND HSE systems and day to day HSE
operati ons by worki ng wi th GLOBAL CONTRACTING L.L.C.(DUBAI) & RAVI GREEN ENGINEERING
Pvt(PAKISTAN)Carri ed out si te vi si t to ensure safety at si te, hi ghl i ghti ng potenti al hazards, taki ng
preventi ve measures to avoi d i nci dents and reporti ng unsafe occurrences and acti ve parti ci pati on i n HSE
revi ew meeti ngs.
Academic Qualifications:
BA (2013) ARTS PUNJAB UNIVERSITY, LAHORE
BSc (2007) DOUBLE MATH, PHYSICS PUNJAB UNIVERSITY, LAHORE
CERTIFICATION:
NEBOSH IGC (2015) August INTERNATIONAL GENERAL CERTIFICATE IN OCCUPATIONAL HEALTH
AND SAFETY (UK)
1- CERTIFICA TE IN CONTROLLING WORK PLACE HAZARDS.
2- CERTIFICA TE IN CONSTRUCTIO N HEALTH &SAFETY.
3- CERTIFICA TE IN FIRE SAFETY AND RISK MANAGEMENT.
4- CERTIFICA TE IN HEALTH AND SAFETY PRACTICAL APPLICATION.
SKILLS:
HAZID,HAZOD,ENVID,HSEMS,HACCP,INSPECTION,AUDITING,PLANNING,BUDGETING,SCHEDULING,EVALUATION,
ANALYSIS,TRA,RISK MS,MAINTENANCE PROCESS,ROAD SAFETY,WASTE MANAGEMENT SYSTEM,H2S CONTROLS &
BREATHING APPRATUS,LOTO.
2. CV JANBAZRAZA 2
GLOBAL CONTRACTING L.L.C, DUBAI May 2016 till Present
SAFETY OFFICER
My job is to ensure the Facility/Construction Site must meetall Health and Safety Standards and Facilitiesaccording
to Legislationand Company Policiesto fulfill thisrequirement,Ihave to perform differentdutieswhichare as under.
Assess the Current Resources and Priorities of Maintenance needs, Planning, Budgeting and Scheduling.
Direct coordinating and Planning with different departments.
Good Knowledgeof Hazardsandcontrol measures related to (Confined space, Work at Height, Electrical work,
Welding work, Scaffolding safety, Excavation safety, Lifting Operation Safety).
Handling Construction Waste (elimination, segregation, collection ,separation, diversion(recycle, reuse,
salvage), deposition (burn, buried)
Maintain good Housekeeping, Welfare facilities and Working Environment Requirements.
Quality Control process.
Inspection process.
PTWS for (Confined space, Work at Height, Electrical work, Welding work).
Road Safety process.
Hiring sub-contractors for company
Training of workers and gave them awareness about Hazards, HAZOP and Controls measures of the work they
are going to perform and create awareness among them.
Knowledge of Pedestrian and Vehicles segregation strategies.
Knowledge of Fire Safety Process and Standards (sign boards, assembly point, and access and exit routes,
monthly fire cylinder inspection, fire drills, fire marshals, building plans ,prevention ,fighting equipment’s).
Good knowledge of Hazards and controls of Hand Held Tools, Portable Power Tools and Machinery.
Process Improvement and Process Operation.
Knowledge Maintenance Process.
Investigation Report of any accident, incident or near miss happens.
Knowledge of Chemical /Biological hazards and risk controls.
Conduct Meetings and Trainings as per required.
Preventive Maintenance Inspection of Safety and non-safety equipment’s, machinery and Cranes.
Providing help in monthly Audit programs.
TRA, Risk Assessment Ability.
Good in reducing the cost of budget.
Knowledge of Noise, Vibration, Dust health hazards and control and Standards.
Monitoring, measuring and evaluating the performance of process.
Providing Safe Working Environment with the aim of improving overall productivity of an organization..
Understanding customer requirements and striving to exceed customer expectations.
Well aware of First Aid and Medical Facilities
Occupational Health monitoring process
Occupational Health Evaluation
Occupational Health Trainings
Maximizing the results using the current resources effectively and complete the project on time ALWAYS.
3. CV JANBAZRAZA 3
RAVI GREEN ENGINEERING INTERNATIONAL (PVT) LTD PAKISTAN, Rawalpindi, Pakistan Jan’ 2010 – May 2016
HSE &FACILITATION OFFICER
My job is to ensure the Safety of the Tower under construction Faculty area must meet all the safety standards
according to legislation and company policy, complete the project on time without any accident/incident and fine.
Planning of different important activities on construction site such as Excavation, Work at Height, Scaffolding
work, Waste Management, Fire Safety, Lifting Operations etc.
Daily Report and Safety Inductions.
Tool Box Talk.
Analyzing the Unsafe Conditions and Activities on construction site.
TRA where required.
Conduct Safety Trainings where required.
PTW system.
Making OHS Policies, Method Statements and JS.
Maintenance Needs & Requirements. (BASIC & MANDATORY)
Inspections (Daily, Weekly, Monthly)
Accident, Incident Investigations.
Transportation planning.
Lifting Operation planning.
First Aid knowledge.
Mechanical & Non Mechanical Safety
Chemical & Biological Safety
Confined Space Safety.
Housekeeping.
Managing waste of 4 units. (Construction, demolition, industrial waste and disaster debris).
Knows about the waste management process (elimination, segregation, collection, separation, diversion
(recycle, reuse, salvage), deposition (burn, buried)
Road Safety process.
Hiring sub-contractors for company
PTWS for (Confined space, Work at Height, Electrical work, Welding work).
Scaffolding Safety.
Process Improvement and Process Operation.
Road Safety process.
Hiring sub-contractors for company.
H2S controls.
References:
MuhammadAshfaq – ProjectManager| Ravi Green(Pvt.) Ltd. Email:Ashfaq@ravigreen.com.pk ,AdeemSuleiman–
Mechanical Engineer| Ravi Green(Pvt.) Ltd.Email:adeemsuleman@live.com;adeemsuleman@ravigreen.com.pk