J v(zn)h 1x1 sx zip - Tight Buffer cable
•
0 likes•35 views
Tight Buffer Fiber Optic Cables, Copper Networking Data Lan cables, CPR Euro Class Certified, fiber optic cable - sm - mm fiber optic cable
Report
Share
Report
Share
Download to read offline
Recommended
J h pigtail - Tight Buffer Fiber Optic Cables - upcom
This document provides specifications for Upcom Telekom's J-H Pigtail indoor tight buffer fiber optic cable. The cable features a 900 micron halogen free flame retardant jacket surrounding a 250 micron optical fiber coating and 125 micron optical fiber core. It is designed for easy and direct termination with connectors for indoor interconnect and patchcord applications. The cable complies with relevant EN, IEC standards and has features such as easy stripping and termination, low installation cost, and a dry, all-dielectric and halogen free design.
I v(zn)hh 2x1 flat dx - Tight Buffer Fiber Optic Cables - upcom
This document provides specifications for an indoor fiber optic cable called I-V(ZN)HH 2x1 Flat DX produced by UPCOM Telekom. It contains two single-fiber cables arranged parallel with aramid strength members and low flame retardant sheathing. The cable is designed for use in indoor fiber optic distribution systems and direct termination. It complies with relevant fiber optic cable standards and is suitable for LAN, fan-out, and FTTH applications.
J v(zn)h 2x1 dx zip - Tight Buffer Fiber Optic Cables - upcom
Tight Buffer Fiber Optic Cables, Copper Networking Data Lan cables, CPR Euro Class Certified. J v(zn)h 2x1 dx zip
I v(zn)hh break sz - Tight Buffer Fiber Optic Cables - upcom
Tight Buffer Fiber Optic Cables, Copper Networking Data Lan cables, CPR Euro Class Certified, fiber optic cable - sm - mm fiber optic cable, I v(zn)hh break sz
I a-v(zn)h(bn)h
This document provides specifications for the I-A-V(ZN)H(BN)H Tight Buffer Mini-Breakout Non-Metallic Armored Single LSZH Jacket Indoor Type Fiber Optic Cable made by UPCOM Telekom. The cable contains tight buffer tubes around a central strength element and has a glass yarn armor and low smoke halogen free outer jacket. It is suitable for indoor dry applications and provides rodent protection. The document lists the cable features and benefits, specifications, and optical characteristics.
A n(zm)h-sh - ftth drop cable
FTTH Drop Fiber Optic Cables, made in Turkey. Copper Networking Data Lan cables, CPR Euro Class Certified. ftth drop cable.
A dq(bn)(sr)h-mlt
This document provides specifications for the A-DQ(BN)(SR)H–MLT Multi Loose Tube Metallic Armored Single LSZH Jacket Outdoor Type Fiber Optic Cable made by UPCOM Telekom. It describes the cable's 10 main components, lists compliance standards, suitable applications, and features like being outdoor rated, waterproof, UV resistant and providing metallic armor protection. The document also provides details on tube and fiber counts, dimensions, weights, tensile loads, optical characteristics, temperature ratings and more.
I v(zn)h mini breakout - fiber optic cable - upcom
This document provides specifications for an I-V(ZN)H Mini Breakout tight buffer indoor fiber optic cable made by UPCOM Telekom. Key features include direct termination of connectors to the tight buffer for space savings, a non-metallic and halogen-free design for fire safety in indoor applications, and available configurations with multimode or singlemode optical fibers. The document lists technical details such as fiber counts, dimensions, loading limits, optical characteristics, and environmental specifications.
Recommended
J h pigtail - Tight Buffer Fiber Optic Cables - upcom
This document provides specifications for Upcom Telekom's J-H Pigtail indoor tight buffer fiber optic cable. The cable features a 900 micron halogen free flame retardant jacket surrounding a 250 micron optical fiber coating and 125 micron optical fiber core. It is designed for easy and direct termination with connectors for indoor interconnect and patchcord applications. The cable complies with relevant EN, IEC standards and has features such as easy stripping and termination, low installation cost, and a dry, all-dielectric and halogen free design.
I v(zn)hh 2x1 flat dx - Tight Buffer Fiber Optic Cables - upcom
This document provides specifications for an indoor fiber optic cable called I-V(ZN)HH 2x1 Flat DX produced by UPCOM Telekom. It contains two single-fiber cables arranged parallel with aramid strength members and low flame retardant sheathing. The cable is designed for use in indoor fiber optic distribution systems and direct termination. It complies with relevant fiber optic cable standards and is suitable for LAN, fan-out, and FTTH applications.
J v(zn)h 2x1 dx zip - Tight Buffer Fiber Optic Cables - upcom
Tight Buffer Fiber Optic Cables, Copper Networking Data Lan cables, CPR Euro Class Certified. J v(zn)h 2x1 dx zip
I v(zn)hh break sz - Tight Buffer Fiber Optic Cables - upcom
Tight Buffer Fiber Optic Cables, Copper Networking Data Lan cables, CPR Euro Class Certified, fiber optic cable - sm - mm fiber optic cable, I v(zn)hh break sz
I a-v(zn)h(bn)h
This document provides specifications for the I-A-V(ZN)H(BN)H Tight Buffer Mini-Breakout Non-Metallic Armored Single LSZH Jacket Indoor Type Fiber Optic Cable made by UPCOM Telekom. The cable contains tight buffer tubes around a central strength element and has a glass yarn armor and low smoke halogen free outer jacket. It is suitable for indoor dry applications and provides rodent protection. The document lists the cable features and benefits, specifications, and optical characteristics.
A n(zm)h-sh - ftth drop cable
FTTH Drop Fiber Optic Cables, made in Turkey. Copper Networking Data Lan cables, CPR Euro Class Certified. ftth drop cable.
A dq(bn)(sr)h-mlt
This document provides specifications for the A-DQ(BN)(SR)H–MLT Multi Loose Tube Metallic Armored Single LSZH Jacket Outdoor Type Fiber Optic Cable made by UPCOM Telekom. It describes the cable's 10 main components, lists compliance standards, suitable applications, and features like being outdoor rated, waterproof, UV resistant and providing metallic armor protection. The document also provides details on tube and fiber counts, dimensions, weights, tensile loads, optical characteristics, temperature ratings and more.
I v(zn)h mini breakout - fiber optic cable - upcom
This document provides specifications for an I-V(ZN)H Mini Breakout tight buffer indoor fiber optic cable made by UPCOM Telekom. Key features include direct termination of connectors to the tight buffer for space savings, a non-metallic and halogen-free design for fire safety in indoor applications, and available configurations with multimode or singlemode optical fibers. The document lists technical details such as fiber counts, dimensions, loading limits, optical characteristics, and environmental specifications.
A v(zn)h(sr)2 y - www.upcom.com.tr
This document describes the A-V(ZN)H(SR)2Y tight buffer mini-breakout metallic armored distribution single PE jacket outdoor type fiber optic cable made by UPCOM Telekom. It has an outer sheath, corrugated steel tape armor, inner jacket, 900 micron tight buffer tubes around a central strength element, glass yarns, and optical fibers. The cable provides protection against mechanical and environmental damage for outdoor use and direct burial. It complies with relevant standards and is suitable for various telecommunication applications.
I v(bn)h mini-breakout - fiber optic cable - upcom
This document provides specifications for the I-V(BN)H Mini-Breakout fiber optic cable made by UPCOM Telekom. The cable has a tight buffer mini breakout design making it ideal for direct connector installation where space is limited. It uses low smoke zero halogen materials and complies with various industry standards for indoor fiber optic cables. Specifications are provided for fiber count and type, dimensions, weights, optical and mechanical characteristics.
I v(zn)hh nx1- Tight Buffer Fiber Optic Cables - upcom
Tight Buffer Fiber Optic Cables, Copper Networking Data Lan cables, CPR Euro Class Certified, fiber optic cable - sm - mm fiber optic cable, I v(zn)hh nx1
A n(swr)h-sh - ftth drop cable - upcom
Tight Buffer Fiber Optic Cables, Copper Networking Data Lan cables, CPR Euro Class Certified. A n(swr)h-sh - ftth drop cable
A dq(bn)2 y-clt - fiber optic cable - upcom.com.tr
This document provides specifications for the A-DQ(BN)2Y–CLT Central Loose Tube Non-Metallic Armored Single PE Jacket Outdoor Type Fiber Optic Cable. It includes details on the cable construction, fiber counts and specifications, optical characteristics, temperature range, bending radius, and compliance with relevant standards. The cable is designed for economical low fiber count applications for access and distribution networks requiring protection from physical damage and environmental factors.
I a-dq(bn)h-mlt - fiber optic cable - www.upcom.com.tr
This document provides specifications for the I-A-DQ(BN)H-MLT Multi Loose Tube Non-Metallic Armored Single LSZH Jacket Indoor Outdoor Fiber Optic Cable made by UPCOM Networking. The cable has a multi loose tube structure made of colored tubes around a central strength element for indoor and outdoor use. It provides protection from mechanical and environmental damage. The cable complies with various telecommunications standards and is suitable for voice and data communication networks, fiber to the cabinet/building/curb applications, and harsh outdoor environments. Key features include waterproofing, strength members, loose tube design, and a halogen-free outer jacket.
U dq(bn)h-clt - upcom.com.tr
This document provides specifications for the U-DQ(BN)H–CLT Central Loose Tube, Non-Metallic Armored Universal Indoor/Outdoor Cable LSZH Jacket made by UPCOM Telekom. It describes the cable construction including an LSZH outer sheath, glass yarn reinforcement, central loose tube, filling material, and optical fibers. The cable is designed for low fiber count applications up to 12 fibers and complies with relevant IEC standards. It has features like being compact, waterproof, rodent resistant, and using halogen free materials.
A dq(bn)2 y-mlt - fiber optic cable - www.upcom.com.tr
This document provides specifications for the A-DQ(BN)2Y–MLT multi loose tube non-metallic armored single PE jacket duct/buried type fiber optic cable from UPCOM Telekom. Key details include an outer PE jacket, swellable tape, glass aramid yarns, central strength member, buffer tubes filled with thixotropic jelly containing the optical fibers. The cable is designed for outdoor use in ducts, conduits, or direct burial and provides protection from mechanical and environmental risks. It can be used for various telecommunication and data applications.
A dq(bn)(sr)2 y-mlt
This document provides specifications for the A-DQ(BN)(SR)2Y–MLT Multi Loose Tube Metallic Armored Single PE Jacket Outdoor Type Fiber Optic Cable made by UPCOM Telekom. Key features include waterproofing, loose buffer tubes, metallic armor protection, and an HDPE outer jacket. The cable contains 8 buffer tubes with 12 fibers each and has specifications for optical attenuation, crush resistance, temperature range, and bending radius. It is intended for outdoor, underground, and harsh environment voice and data communication networks.
YC-SMA female-IPEX
This document provides specifications for a RF coaxial cable connector model YC-SMA(F)-U.FL made by ASIAN CREATION COMMUNICATION CO.,LTD. The cable has a SMA female connector, is 1.13mm thick, 105mm in length, has 50 ohm impedance, and can be used between WiFi, WLAN, GSM, GPRS, CDMA, and GPS modules. It is resistant to temperature fluctuations and has low signal loss.
IRJET- Signal Jammer in Military Operations
The document discusses signal jammers used in military operations. It describes how signal jammers work by broadcasting radio frequencies to interfere with cell phone signals, preventing communication. The document outlines the components of a signal jammer, including a microcontroller, LCD display, transistors, and GSM modem. It provides circuit diagrams and discusses programming the microcontroller to control activation of the jammer. In testing, the jammer was able to block cell phone signals within a range of 3-4 meters. The document concludes the jammer could help isolate enemy posts and stop reinforcement communications, aiding military operations, while also mentioning future non-military uses of jammers.
Panduit tx6000 utp-copcable-w
The document describes specifications for Panduit TX6000 Enhanced Category 6 UTP copper cable. It specifies that the cable exceeds ANSI/TIA-568-C.2 Category 6 component standards with 23 AWG copper conductors twisted in pairs and separated by a cross-divider. It is enclosed in a low smoke PVC jacket and supports applications including Ethernet, ATM, and Token Ring through 100 meters.
Up pso1250-3120xx r - transceiver - fiber optic - upcom.com.tr
This document provides specifications for Upcom Telekom's 1G SFP LX optical transceiver module. It operates at 1.25Gbps over single-mode fiber with a transmission distance of up to 20km. The transceiver complies with SFP MSA standards and supports applications such as 1G fiber channel and gigabit Ethernet. It provides monitoring of parameters like temperature and power through an optional digital diagnostic interface.
Dlm0607 Rawelcom Model Site
The document provides instructions for installing a flexi indoor BTS site at a Maxis location in Delhi. It outlines the necessary equipment, including flexi BTS cabinets, cards, cables, antennas, feeders and mounting hardware. It also describes the installation process which includes preparing the indoor infrastructure, installing and cabling the flexi BTS cabinet, connecting antennas and feeders, and ensuring proper grounding and labeling of all equipment. The document is intended as guidance for installation teams to standardize the flexi indoor BTS setup process.
Fanout assemblies catalogue
LC Connector Compliance
IEC 61754-20, TIA 604-10-A, RoHS
SC Connector Compliance
IEC 61754-4, TIA 604-3, RoHS
Fiber Count
8 Fibers
Cable Diameter
3.0mm
Subunit Diameter
1.8mm
Alignment Technology
Full ceramic ferrule (Zirconia ZrO2)
Operating Temperature
-40°C to +85°C
Flammability
UL94 V-0
Durability
> 1000 mating cycles
Transmission with Applied Tensile Load
GR-326 CORE 4.4.3.5
Insertion Loss: IEC 61300-3-4-MB
Multimode: ≤ 0.40dB
Return Loss: IEC 61300-3-6-MB
Multimode: ≥ 40dB
Connector End Face Geometry
IEC 61755-3
Up dc-209 a - dome closure - fiber optic - upcom
This document provides information about the UP-DC-209A fiber optic closure from UPCOM Networking. The closure can accommodate up to 48 fiber cores and is intended for underground, wall mount, aerial and direct buried applications in fiber distribution networks. It has mechanical and chemical resistance for various application areas. The closure allows quick and easy installation and provides protection against water permeation for fiber splices.
ComNet FVT320S1 Data Sheet
Buy the ComNet FVT320S1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT320S1_p/comnet-fvt320s1.htm?=slideshare
ComNet FVT320D8S1 Data Sheet
Buy the ComNet FVT320D8S1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT320D8S1_p/comnet-fvt320d8s1.htm?=slideshare
ComNet FVT120M1 Data Sheet
Buy the ComNet FVT120M1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT120M1_p/comnet-fvt120m1.htm?=slideshare
U-28
The U-28 system was designed to provide communication between divers in limited bandwidth environments while maintaining diver safety and medical limitations. It uses 3 transmission levels to nearly triple operational range compared to other systems. The U-28B has an active acoustic antenna that reduces underwater noise to increase signal to noise ratio. The wrist unit can also be left underwater for over 30 days in passive mode, allowing divers to navigate to its location, ideal for caching equipment or returning to a spot.
ftth drop cable - upcom
Tight Buffer Fiber Optic Cables, Copper Networking Data Lan cables, CPR Euro Class Certified. I n(zm)h drop - ftth drop cable
A dq(bn)(sr)h-clt - www.upcom.com.tr
This document describes the Central Loose Tube Metallic Armored Single LSZH Jacket Indoor/outdoor Fiber Optic Cable produced by UPCOM Telekom. It specifies that the document is the property of UPCOM Telekom and cannot be copied without permission. The cable features a low smoke zero halogen outer sheath, central loose tube structure, glass yarns, corrugated steel tape armor and ripcord for easy stripping. It is designed for use in access and distribution networks where cables may be exposed to physical damage.
More Related Content
What's hot
A v(zn)h(sr)2 y - www.upcom.com.tr
This document describes the A-V(ZN)H(SR)2Y tight buffer mini-breakout metallic armored distribution single PE jacket outdoor type fiber optic cable made by UPCOM Telekom. It has an outer sheath, corrugated steel tape armor, inner jacket, 900 micron tight buffer tubes around a central strength element, glass yarns, and optical fibers. The cable provides protection against mechanical and environmental damage for outdoor use and direct burial. It complies with relevant standards and is suitable for various telecommunication applications.
I v(bn)h mini-breakout - fiber optic cable - upcom
This document provides specifications for the I-V(BN)H Mini-Breakout fiber optic cable made by UPCOM Telekom. The cable has a tight buffer mini breakout design making it ideal for direct connector installation where space is limited. It uses low smoke zero halogen materials and complies with various industry standards for indoor fiber optic cables. Specifications are provided for fiber count and type, dimensions, weights, optical and mechanical characteristics.
I v(zn)hh nx1- Tight Buffer Fiber Optic Cables - upcom
Tight Buffer Fiber Optic Cables, Copper Networking Data Lan cables, CPR Euro Class Certified, fiber optic cable - sm - mm fiber optic cable, I v(zn)hh nx1
A n(swr)h-sh - ftth drop cable - upcom
Tight Buffer Fiber Optic Cables, Copper Networking Data Lan cables, CPR Euro Class Certified. A n(swr)h-sh - ftth drop cable
A dq(bn)2 y-clt - fiber optic cable - upcom.com.tr
This document provides specifications for the A-DQ(BN)2Y–CLT Central Loose Tube Non-Metallic Armored Single PE Jacket Outdoor Type Fiber Optic Cable. It includes details on the cable construction, fiber counts and specifications, optical characteristics, temperature range, bending radius, and compliance with relevant standards. The cable is designed for economical low fiber count applications for access and distribution networks requiring protection from physical damage and environmental factors.
I a-dq(bn)h-mlt - fiber optic cable - www.upcom.com.tr
This document provides specifications for the I-A-DQ(BN)H-MLT Multi Loose Tube Non-Metallic Armored Single LSZH Jacket Indoor Outdoor Fiber Optic Cable made by UPCOM Networking. The cable has a multi loose tube structure made of colored tubes around a central strength element for indoor and outdoor use. It provides protection from mechanical and environmental damage. The cable complies with various telecommunications standards and is suitable for voice and data communication networks, fiber to the cabinet/building/curb applications, and harsh outdoor environments. Key features include waterproofing, strength members, loose tube design, and a halogen-free outer jacket.
U dq(bn)h-clt - upcom.com.tr
This document provides specifications for the U-DQ(BN)H–CLT Central Loose Tube, Non-Metallic Armored Universal Indoor/Outdoor Cable LSZH Jacket made by UPCOM Telekom. It describes the cable construction including an LSZH outer sheath, glass yarn reinforcement, central loose tube, filling material, and optical fibers. The cable is designed for low fiber count applications up to 12 fibers and complies with relevant IEC standards. It has features like being compact, waterproof, rodent resistant, and using halogen free materials.
A dq(bn)2 y-mlt - fiber optic cable - www.upcom.com.tr
This document provides specifications for the A-DQ(BN)2Y–MLT multi loose tube non-metallic armored single PE jacket duct/buried type fiber optic cable from UPCOM Telekom. Key details include an outer PE jacket, swellable tape, glass aramid yarns, central strength member, buffer tubes filled with thixotropic jelly containing the optical fibers. The cable is designed for outdoor use in ducts, conduits, or direct burial and provides protection from mechanical and environmental risks. It can be used for various telecommunication and data applications.
A dq(bn)(sr)2 y-mlt
This document provides specifications for the A-DQ(BN)(SR)2Y–MLT Multi Loose Tube Metallic Armored Single PE Jacket Outdoor Type Fiber Optic Cable made by UPCOM Telekom. Key features include waterproofing, loose buffer tubes, metallic armor protection, and an HDPE outer jacket. The cable contains 8 buffer tubes with 12 fibers each and has specifications for optical attenuation, crush resistance, temperature range, and bending radius. It is intended for outdoor, underground, and harsh environment voice and data communication networks.
YC-SMA female-IPEX
This document provides specifications for a RF coaxial cable connector model YC-SMA(F)-U.FL made by ASIAN CREATION COMMUNICATION CO.,LTD. The cable has a SMA female connector, is 1.13mm thick, 105mm in length, has 50 ohm impedance, and can be used between WiFi, WLAN, GSM, GPRS, CDMA, and GPS modules. It is resistant to temperature fluctuations and has low signal loss.
IRJET- Signal Jammer in Military Operations
The document discusses signal jammers used in military operations. It describes how signal jammers work by broadcasting radio frequencies to interfere with cell phone signals, preventing communication. The document outlines the components of a signal jammer, including a microcontroller, LCD display, transistors, and GSM modem. It provides circuit diagrams and discusses programming the microcontroller to control activation of the jammer. In testing, the jammer was able to block cell phone signals within a range of 3-4 meters. The document concludes the jammer could help isolate enemy posts and stop reinforcement communications, aiding military operations, while also mentioning future non-military uses of jammers.
Panduit tx6000 utp-copcable-w
The document describes specifications for Panduit TX6000 Enhanced Category 6 UTP copper cable. It specifies that the cable exceeds ANSI/TIA-568-C.2 Category 6 component standards with 23 AWG copper conductors twisted in pairs and separated by a cross-divider. It is enclosed in a low smoke PVC jacket and supports applications including Ethernet, ATM, and Token Ring through 100 meters.
Up pso1250-3120xx r - transceiver - fiber optic - upcom.com.tr
This document provides specifications for Upcom Telekom's 1G SFP LX optical transceiver module. It operates at 1.25Gbps over single-mode fiber with a transmission distance of up to 20km. The transceiver complies with SFP MSA standards and supports applications such as 1G fiber channel and gigabit Ethernet. It provides monitoring of parameters like temperature and power through an optional digital diagnostic interface.
Dlm0607 Rawelcom Model Site
The document provides instructions for installing a flexi indoor BTS site at a Maxis location in Delhi. It outlines the necessary equipment, including flexi BTS cabinets, cards, cables, antennas, feeders and mounting hardware. It also describes the installation process which includes preparing the indoor infrastructure, installing and cabling the flexi BTS cabinet, connecting antennas and feeders, and ensuring proper grounding and labeling of all equipment. The document is intended as guidance for installation teams to standardize the flexi indoor BTS setup process.
Fanout assemblies catalogue
LC Connector Compliance
IEC 61754-20, TIA 604-10-A, RoHS
SC Connector Compliance
IEC 61754-4, TIA 604-3, RoHS
Fiber Count
8 Fibers
Cable Diameter
3.0mm
Subunit Diameter
1.8mm
Alignment Technology
Full ceramic ferrule (Zirconia ZrO2)
Operating Temperature
-40°C to +85°C
Flammability
UL94 V-0
Durability
> 1000 mating cycles
Transmission with Applied Tensile Load
GR-326 CORE 4.4.3.5
Insertion Loss: IEC 61300-3-4-MB
Multimode: ≤ 0.40dB
Return Loss: IEC 61300-3-6-MB
Multimode: ≥ 40dB
Connector End Face Geometry
IEC 61755-3
Up dc-209 a - dome closure - fiber optic - upcom
This document provides information about the UP-DC-209A fiber optic closure from UPCOM Networking. The closure can accommodate up to 48 fiber cores and is intended for underground, wall mount, aerial and direct buried applications in fiber distribution networks. It has mechanical and chemical resistance for various application areas. The closure allows quick and easy installation and provides protection against water permeation for fiber splices.
ComNet FVT320S1 Data Sheet
Buy the ComNet FVT320S1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT320S1_p/comnet-fvt320s1.htm?=slideshare
ComNet FVT320D8S1 Data Sheet
Buy the ComNet FVT320D8S1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT320D8S1_p/comnet-fvt320d8s1.htm?=slideshare
ComNet FVT120M1 Data Sheet
Buy the ComNet FVT120M1 at JMAC Supply.
http://www.jmac.com/ComNet_FVT120M1_p/comnet-fvt120m1.htm?=slideshare
U-28
The U-28 system was designed to provide communication between divers in limited bandwidth environments while maintaining diver safety and medical limitations. It uses 3 transmission levels to nearly triple operational range compared to other systems. The U-28B has an active acoustic antenna that reduces underwater noise to increase signal to noise ratio. The wrist unit can also be left underwater for over 30 days in passive mode, allowing divers to navigate to its location, ideal for caching equipment or returning to a spot.
What's hot (20)
I v(bn)h mini-breakout - fiber optic cable - upcom
I v(bn)h mini-breakout - fiber optic cable - upcom
I v(zn)hh nx1- Tight Buffer Fiber Optic Cables - upcom
I v(zn)hh nx1- Tight Buffer Fiber Optic Cables - upcom
A dq(bn)2 y-clt - fiber optic cable - upcom.com.tr
A dq(bn)2 y-clt - fiber optic cable - upcom.com.tr
I a-dq(bn)h-mlt - fiber optic cable - www.upcom.com.tr
I a-dq(bn)h-mlt - fiber optic cable - www.upcom.com.tr
A dq(bn)2 y-mlt - fiber optic cable - www.upcom.com.tr
A dq(bn)2 y-mlt - fiber optic cable - www.upcom.com.tr
Up pso1250-3120xx r - transceiver - fiber optic - upcom.com.tr
Up pso1250-3120xx r - transceiver - fiber optic - upcom.com.tr
Similar to J v(zn)h 1x1 sx zip - Tight Buffer cable
ftth drop cable - upcom
Tight Buffer Fiber Optic Cables, Copper Networking Data Lan cables, CPR Euro Class Certified. I n(zm)h drop - ftth drop cable
A dq(bn)(sr)h-clt - www.upcom.com.tr
This document describes the Central Loose Tube Metallic Armored Single LSZH Jacket Indoor/outdoor Fiber Optic Cable produced by UPCOM Telekom. It specifies that the document is the property of UPCOM Telekom and cannot be copied without permission. The cable features a low smoke zero halogen outer sheath, central loose tube structure, glass yarns, corrugated steel tape armor and ripcord for easy stripping. It is designed for use in access and distribution networks where cables may be exposed to physical damage.
A dq(bn)(sr)2 y-clt - fiber optic cable - www.upcom.com.tr
This document provides specifications for the A-DQ(BN)(SR)2Y–CLT Central Loose Tube Metallic Armored Single PE Jacket Outdoor Type Fiber Optic Cable made by UPCOM Telekom. It includes details on the cable construction, fiber types and counts supported, performance specifications including attenuation and temperature range, and suitable applications. The cable is designed for outdoor use in access and distribution networks where there is a risk of physical damage.
Cat 7 a plus s ftp
CAT 7A+ S FTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class F applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 7A+ S FTP cables are suitable for data installations up to 1500 MHz. CAT 7A+ S FTP cable has an S/FTP construction with individual pair Al-Pet foil and an overall tinned copper wire braiding offering a superior performance.
Cat 7 a s ftp
CAT 7A S FTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class F applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 7A S FTP cables are suitable for data installations up to 1200 MHz. CAT 7A S FTP cable has an S/FTP construction with individual pair Al-Pet foil and an overall tinned copper wire braiding offering a superior performance.
Sound proof basic - 19” SoundPROOF Basic Free Standing Cabinet - upcom
19”SoundPROOF Basic Free Standing Cabinet
Overview - SoundPROOF Basic
19” Soundproof Cabinets / Acoustic Cabinets or Soundproof Racks are a cost-effective solution to host IT devices in environments like retail stores, offices or hallways and receptions. Noise from active IT equipment in a high-technology workspace or public area can increase stress, decrease productivity and impact profits. However, sometimes locating noisy network equipment near workers or visitors is unavoidable. Cost or space constraints may prohibit building and maintaining a separate room. In situations like these, keeping the sound to a minimum can greatly improve the working environment for optimum comfort, safety and productivity. Foamlined soundproof cabinets can reduce audible hardware noise by 15 dB to the same level as typical office background sounds. The best soundproof cabinets can reduce noise by an incredible 31 dBA— making noisy equipment whisper-quiet. Soundproof cabinets with this superior level of attenuation are lined with heavy-duty, multilayer composite on all inside surfaces.
Cat 7 s ftp data lan cables - upcom
CAT 7 S FTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choise to support all Class F applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 7 S FTP cables are suitable for data installations up to 900 MHz. CAT 7 S FTP cable has an S/FTP construction with individual pair al-Pet foil and an overall tinned copper wire braiding offering a superior performance.
Construction
- 23 AWG Bare Copper
- Skin/Foam/Skin PE Insulation
- Al-Pet Foil 100% Coverage
- Tinned Copper Drain Wire
- Tinned Copper Wire Braiding
- Outer Sheath PVC, HFFR* or PE
Cat6 f utp cable - upcom
This document provides information about CAT 6 F UTP cables produced by UPCOM Telekom. It specifies that the cables are constructed according to ISO IEC 61156-5 and TIA 568-C.2 standards to support applications like Ethernet, Fast Ethernet, and Gigabit Ethernet up to 250 MHz. It also lists the cable's technical properties, electrical properties, frequency attenuation specifications, and product name options with material and fire retardancy information.
Cat6 a f ftp
CAT 6A F FTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class E applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 6A F FTP cables are suitable for basic voice and data installations up to 250 MHz.
Cat6 sf utp data lan cable network - upcom
CAT 6 SF UTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class E applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 6 SF UTP cables are suitable for basic voice and data installations up to 250 MHz.
Construction
- 23 AWG Bare Copper
- PE Insulation
- Pair Seperator PE
- Al-Pet Foil 100% Coverage
- Tinned Copper Wire Braiding
- Outer Sheath PVC, HFFR* or PE
Compliance
- EIA/TIA-568-C.2
- ISO/IEC 11801 2nd ed
- IEC 61156-5 , EN 50173-1
- EN 50288-5-1
Armored fiber cable | Armored fiber optic patch cable | Unisol
Armored fiber optic patch cable assemblies are fully intractable with any standard coupling adapter products&deliver high stability under a range of application.
Cat 5e f utp data lan cables - upcom
This document provides specifications for CAT 5e F/UTP cable produced by UPCOM Telekom. It describes the cable's construction using 24 AWG bare copper wires with PE insulation and foil shielding. The cable is compliant with various Ethernet standards and can support applications up to 1000Base-T while providing technical properties such as bandwidth up to 100MHz, minimum bending radii, tensile strength, and operating temperatures. Specifications for attenuation rates at various frequencies are also included, along with information on outer sheath materials and fire safety ratings.
Ningbo Junbo Electronic CO.,Ltd
Ningbo Junbo Electronic Cable Co.,Ltd is the professional manufacturer of cabling,network and communication equipment and accessories in Ningbo China.Our main products are Lan cable,alarm cable,telephone cable,speaker cable,coaxial cable,network accessory,cabinet,HDMI cable,computer cable,fiber cable and AV cables .Al l produc t s are exported to international mar kes including Europe,America,Middle east,Africa etc.
Ningbo Junbo Electronic Cable Co.,Ltd covers 8000 square meter and has more than 100 employees.All of worker well-trained and skillful,we have our own engineering and technical team.We have many modern and advanced manufacturing machines and test equipment.
We do believe in the win-win situation for building up long-terms business relationship.Outstanding service,quality and cooperation are the core values of Ningbo Junbo Cable Co.,Ltd
Cat 5e u utp data lan cables - upcom
CAT 5e U/UTP cables are produced according to ISO IEC 61156-5 and TIA 568B requirements, an excellent choice to support all Class D applications like Ethernet, Fast Ethernet, Gigabit Ethernet. Cat 5e U/UTP cables are suitable for basic voice and data installations up to 100 MHz.
Construction
- 24 AWG Bare Copper
- PE Insulation
- Outer Sheath PVC,HFFR* or PE
Compliance
- EIA/TIA-568-C.2
- ISO/IEC 11801 2nd ed
- IEC 61156-5 , EN 50173-1
- EN 50288-3-1
Application
- IEEE 802.3: 10Base-T, 100Base-T, 1000Base-T, 10GBase-T, IEEE 802.5 16 MB, ISDN, TPDDI,
- ATM Power over Ethernet (PoE) / PoE+
Huawei GPON Fundamentals
This document provides an overview of GPON (Gigabit-capable Passive Optical Network) technology. It discusses the basic concepts and working principles of PON networks, comparing GPON to other PON standards like EPON. The document also analyzes key GPON standards and specifications, describes the GPON network model reference, and reviews basic GPON performance parameters and network protection modes.
Cat6 u utp data lan cable - upcom
CAT 6 U UTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class E applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 6 U UTP cables are suitable for basic voice and data installations up to 250 MHz.
Construction
- 23 AWG Bare Copper
- PE Insulation
- Pair Separator PE
- Outer Sheath PVC, HFFR or PE
Compliance
- EIA/TIA-568-C.2
- ISO/IEC 11801 2nd ed
- IEC 61156-5 , EN 50173-1
- EN 50288-6-1
Application
- IEEE 802.3: 10Base-T, 100Base-T, 1000Base-T, 10GBase-T, IEEE 802.5 16 MB, ISDN, TPDDI,
- ATM Power over Ethernet (PoE) / PoE
Gpon fundamentals
This document provides an overview of GPON (Gigabit-capable Passive Optical Network) technology:
- GPON uses wavelength division multiplexing to enable bidirectional communication over a single fiber, with downstream broadcast and upstream TDMA for multiplexing user signals.
- Key standards include ITU-T G.984 for parameters, G.984.2 for physical layer specs, G.984.3 for transmission convergence layer, and G.984.4 for OMCI management.
- The GPON architecture consists of an OLT, ONUs, a passive optical splitter, and supports transmission speeds up to 2.5Gbps downstream and 1.25Gbps upstream.
Gpon fundamentals
The document discusses GPON (Gigabit-capable Passive Optical Network) technology. It provides an overview of GPON standards and network architecture. GPON uses wavelength division multiplexing and TDMA to transmit data over a single fiber. The key standards are ITU-T G.984 series, which define aspects like transmission rates, frame structure, and OMCI management. A GPON network provides various access methods like FTTH, FTTB, and FTTC to support broadband services.
ZTE Power Grid Solution
This document provides an overview of ZTE's power grid solution, including:
1) It describes three scenarios for network implementation using NG SDH, dual network with SDH and IP/MPLS, and triple network with DWDM/OTN, NG SDH, and IP/MPLS.
2) It provides an overview of ZTE's product families for NG WDM/OTN, NG-SDH, PTN, and datacom networks.
3) It provides an example of how ZTE's PTN products were used to build a network for Shandong Power in China.
Similar to J v(zn)h 1x1 sx zip - Tight Buffer cable (20)
A dq(bn)(sr)2 y-clt - fiber optic cable - www.upcom.com.tr
A dq(bn)(sr)2 y-clt - fiber optic cable - www.upcom.com.tr
Sound proof basic - 19” SoundPROOF Basic Free Standing Cabinet - upcom
Sound proof basic - 19” SoundPROOF Basic Free Standing Cabinet - upcom
Armored fiber cable | Armored fiber optic patch cable | Unisol
Armored fiber cable | Armored fiber optic patch cable | Unisol
More from Fatih BATAL
Soundproof cabinet 19inch
The document describes soundproof server cabinets that are designed to absorb noise from active equipment mounted inside. They have wood exteriors and glass fronts. Soundproofing materials and silent fan modules keep noise levels within the cabinet at 29-30dB or lower. Technical details are provided on fan specifications, dimensions, material properties, and certifications of various cabinet models. Diagrams show engineering drawings of sample 12U, 16U, 26U, 36U, and 42U cabinet designs.
Upcom product overview 2018-patchcords
A fiber optic patch cord is a cable with connectors at each end to rapidly connect optical switches, CATV equipment, and other telecommunications equipment. Patch cords come in single or multi-fiber versions with connectors selected for the interfacing equipment. They are used to flexibly interconnect active and passive optical devices in applications like datacom networks, broadband networks, and CATV networks.
Upcom e catalogue 2019
Fiber Optic Connectivity
ADAPTORS ATTENUATORS PATCH CORDS PIGTAILS MEDIA CONVERTERS & CHASSIS
MPO CAS
SETTES
MPO / MT
P TRUNCK
SPL
ITTERS
DOME C
LOSURES
IN LINE CL
6 82
OSURES
FTTH BOX
ES &
FIBER OP
TIC
FUSION S
PLICE
OUTLETS
TERMINATION PROTECTORS BOXES
8 C7o p p e 9r C o 1n n e c t i 9v i t y 2 9 4 9 5
MODULE & BOOTS
STRIPPIN
P
R PLUGS
LAN CAB
LE TESTER
KEYSTON
E JACK
COPPER I
NSTALLERS
CRIMPING
TOOLS
96 97 981
8113 115
TOO0
L KIT
G TOOLS
PUNCH D
TOOLS
OWN
PATCH
PANELS
FACE PLATES
SURFACE MOUNT BOXES
PATCH CORDS
Cable CAT 5E U/UTP CABLE PVC CAT 5E U/UTP CABLE LSZH CAT 5E F/UTP CABLE PVC CAT6 F/UTP CABLE LSZH
CAT6 U/UTP CABLE PVC CAT6 U/UTP CABLE LSZH CAT6A U/UTP CABLE LSZH CAT7 S/FTP CABLE LSZH
U-DQ(BN)H A-DQ(BN)2Y A-DQ(BN)(SR)2Y I-V(ZN)H
Rack Cabinet
I-V(ZN)H MINI I-V(BN)H MINI I-V(ZN)HH 2x1 I-V(ZN)HH
I-V(ZN)HH J-VH PIGTAIL J-V(ZN)H 1x1 J-V(ZN)H 2x1
I-N(ZM)H w FRP (Drop) A-N(ZM)H-SH
OPTICAL FIBER SPECIFICATIONS
W-LINE WALL MOUNTED W-LINE WALL MOUNTED
FS-LINE
FREE STANDING
FS-LINE FREE STANDING
RACK CABINET RACK CABINET ACCESSORIES
Upcom® is a global organization providing connectivity and infrastructure solutions for all size of organizations. Upcom® provides complete networking solutions within the industry. Upcom was established in 2018 with its headquarters in Istanbul in Turkey.
Upcom® is a platform where you can find Fiber Optic Connectivity Product, Copper connectivity product, Cable & Rack Cabinet since 2018, based in Turkey. It provides a broad range of products and enrich the variety of products that is available at the stock in each and every day. Upcom’s mission is to provide its customers with reliable, modern and cost effective networking solutions.
Upcom is aggressive, straightforward oriented global supplier of networking solutions and committed to provide its customers with cost effective and reliable networking solutions that keeps them step forward from their competitors and puts them one step closer to future.
Upcom has presence in most sophisticated global markets, in Europe and Middle East.
Upcom is focused on providing quality proven and certified products by UL, ETL, CPR, CE, REACH & RoHS. Connection technology components are in compliance with international standards and meet the highest standards and are used worldwide.
Cable blowing machine
This document provides information about a fiber optic cable blowing machine called the UP-HYDRO, including its quality policy, vision, mission, and technical details. The UP-HYDRO is a hydraulic cable and tube blowing machine that is designed to blow cable and tubes through ducts. It includes a hydraulic power unit to provide hydraulic power. The company aims to provide high quality products and services, maximize customer satisfaction, and create value for employees and customers.
Odf
Optical Distribution Frame Free Standing cabinetsprovide sufficient capacity and internal volume that your fiber optics infrastructurerequires.
It provides solutions for all such equirements like maximum cabling space for fiber optic modules and multi directional access.
DETACHABLEDOOR
Rear and side doors of the cabinets have barrel locking system and are detachable.
FRONT GLASSDOOR
Standard front door model for the cabinets
are of extruded aluminum frame, 4mm, high fracture resistance, tempered, antistatic, and full length double glass.
It has 2 point barrel locking system at the top and bottom parts ensuring a safe use.
mpo-mtp-catalogue
Multi-fiber CableAssemblies
High Connectivity Assemblies
MTP to MTP Assemblies
MTP to MTP Assemblies
Fiber Count : 8, 12 or 24
Cable Type : OS2 YELLOW OM3 TURQUOISE
OM4 HEATHER VIOLET
Connector Type Side A : 12 or 24 MTP connector
Connector Type Side B : 12 or 24 MTP connector
Cable Diameters : 3.0 mm; 8, 12 or 24 FO 3.6 mm; 12 or 24 FO
MTP to 8xLC Fan-out (1.8mm) Assemblies
Fiber Count : 8
Cable Type : OS2 YELLOW OM3 TURQUOISE
OM4 HEATHER VIOLET
Connector Type Side A : 12 MTP connector
Connector Type Side B : 4xLC Duplex or 4xLC Uniboot
Cable Diameter : 3.0 mm; MTP Side
Fan-Out Cable Diameter: 1.8 mm; LC Side (Fan-out)
MTP to 12xLC Fan-out (1.8mm) Assemblies
Fiber Count : 12
Cable Type : OS2 YELLOW OM3 TURQUOISE
OM4 HEATHER VIOLET
Connector Type Side A : 12 MTP connector
Connector Type Side B : 6xLC Duplex or 6xLC Uniboot
Cable Diameter : 3.0 mm; MTP Side
Fan-Out Cable Diameter : 1.8 mm; LC Side (Fan-out)
MTP to 24xLC Fan-out (1.8mm) Assemblies
Fiber Count : 24
Cable Type :
OS2 YELLOW
OM3 TURQUOISE
OM4 HEATHER VIOLET
Connector Type Side A : 24 MTP connector
Connector Type Side B : 12xLCDuplexor12xLCUniboot
Cable Diameter : 3.0 mm; MTP Side
Fan-Out Cable Diameter : 1.8 mm; LC Side (Fan-out)
Fiber raceway systems made in turkey
Upcom ﰅber opﰋic raceﰐaﰑ ﰉﰑﰉﰋem iﰉ a fﰌllﰑ encloﰉed ducting system that segregates, routes, and protects ﰅber optic cables and jumpers from building entry point to ﰅber termination and distribution equipment. With the raceﰐaﰑ ﰉﰑﰉﰋem, ﰅber iﰉ eaﰉilﰑ ﰋraced and acceﰉﰉed through its convenient fully wrap-around, lay-in design.
Sﰋraighﰋ channelﰉ and cﰌrﰒed ﰅﰋﰋingﰉ are ﰉpeciﰅcallﰑ deﰉigned ﰋo preﰒenﰋ ﰅberﰉ from ﰒiolaﰋing a 50mm minimum bend Radius requirement and they protect ﰅberﰉ from ﰉnagging, crimping, and ﰉﰋreﰉﰉ.
The ﰉﰑﰉﰋemﰓﰉ modular design and extensive mounting kit selection enable the Project engineer to meet cable capacity requirements and future expansion needs using existing superstructure, cable racking and/or equipment racking.
The ﰔeﰕibiliﰋﰑ and ﰉimpliciﰋﰑ of ﰋhe UPCOM raceway system ensures cost-effective installations for new or existing cable routes in Central Oﰇceﰉ, CEVs, Head-ends, Remote Oﰇceﰉ, Data Centers, and Wiring Closets.
Fiber Raceway Systems
Technical Features
All exposed surfaces are textured
High impact thermoplastic robust design,PC/ABS blend Flammability rating of V-0 according to UL 94 Hardware-free covers on all components
Halogen-free (RoHS complaint )
Robust and strong product design
Versatile mounting kits
Internal cable retainers
Fiber raceway systems
New three-hole model performs all common fiber stripping functions in one compact tool.
Specifications
Hole for removal of 2 to 3 mm fiber jackets.
Remove 900 tight buffer to 250 micron buffer coating.
Standard 250 to 125 micron stripping.
Same consistent quality and features found in our standard FO 103-S tool.
Also available: FO 103-T-400-250 Fiber Optic Stripper for 400 micron coated PM Fiber (Part No.: 80740)
Length: 5.375 in. (137 mm)
Weight: 2.5 oz (71 g)
Allows easy mid-span access to optical fibers in loose buffer tubes and can access tube sizes from 1.9 mm to 3.0 mm.
Specifications
Shaves precise opening to prevent fiber damage.
Sizing channels to easily determine tube size.
Locking mechanism ensures tool will remain closed through entire shaving operation. Replacement Blade: Part No.: 80935 (5 Blades – 2 screws)
Dimensions: 3.9 x 1.5 x 0.7 in. (99 x 38 x 18 mm)
Weight: 1.36 oz (38.5g)
Fiber optic hand tools
Allows easy mid-span access to optical fibers in loose buffer tubes and can access tube sizes from 1.9 mm to 3.0 mm.
Specifications
Shaves precise opening to prevent fiber damage.
Sizing channels to easily determine tube size.
Locking mechanism ensures tool will remain closed through entire shaving operation. Replacement Blade: Part No.: 80935 (5 Blades – 2 screws)
Dimensions: 3.9 x 1.5 x 0.7 in. (99 x 38 x 18 mm)
Weight: 1.36 oz (38.5g)
Fiber optic management shelves
19” PP/SP 1U Fiber Management Shelves
Fiber Management Shelves are used to terminate and distribute optical ﰅber cables, termination box is ranging from 12 ports to 96 ports. They are convenient equipment to organize and connect the ﰅber optic links. It is suitable for the use in telecommunication network, central ﰆﰇce optical cable system and premise ﰅber networks.
Typical type of our ﰅber panels are rack mounted, they are with optional different kinds of ﰅber optic adapters ports and pre-installed inner trays and accessories, optional pigtails with different types
Basic pdu
Upcom Basic PDU provides advanced and reliable power distribution for critical IT equipment inside the cabinets in Data Centers. Basic rack PDUs have been developed for distributing power and continuity of your equipment. Alternatively, horizontal and vertical models and thin aluminum profile, it provides safe and reliable power with three-phase and single-phase options as well as C13, C19 and UK (Type-G) socket options. Large Product Family UP-POWERGuard Basic PDU enables power distribution for your Data Centers Cabinets. Our customer oriented Basic PDUs can operate stable up to 60 degrees ambient temperature and can be measured on-site with an optional “Hot Swap” LCD screen.
Fiber optic assemblies
Pigtails & Patch Cords SC & LC Fanouts
MTP/MTP - Patch Cords & Breakouts MTP/LC Fanouts
Universal Breakouts.
Properties
LC Connector Compliance
SC Connector Compliance
FC Connector Compliance
ST Connector Compliance E2000 Connector Compliance Alignment Technology Operating Temperature Flammability
Durability
Transmission with Applied Tensile Load
Insertion Loss: IEC 61300-3-4-MB Return Loss: IEC 61300-3-6-MB
Connector End Face Geometry
IEC 61754-20, TIA 604-10-A, RoHS IEC 61754-4, TIA 604-3, RoHS
IEC 61754–13, TIA 604–4–A, RoHS IEC 61754–2, TIA 604–2, RoHS
IEC 61754 - 15, TIA 604 - 16, RoHS Full ceramic ferrule (Zirconia ZrO2) -40°C to +85°C
UL94 V-0
> 1000 mating cycles GR-326 CORE 4.4.3.5
Singlemode: ≤ 0.30dB Singlemode UPC: ≥ 50dB Singlemode APC: ≥ 60dB IEC 61755-3
SC-UPC SC-APC LC-UPC LC-APC E2000-UPC E2000-APC FC-UPC FC-APC ST-UPC
Environment monitoring systems
UPCOM
UP-Guard Environmental
Monitoring
Upcom UP-Guard products enables the environment monitoring and management of environment parameters to ensure the continuity of the operation of IT informatics infrastructures of small, medium and large scale System Rooms and Data Centers with a wide variety of sensor options and user-friendly interface.
Product Family
Upcom provides services to all kinds of public and institutional sectors of small, medium and large scale. From single rack cabinets to the most advanced Data Centers. Upcom offers reliable solutions for all your environment monitoring needs with our domestic production main-units, sensors and external 3rd party device integration with sufficient product range in all scales.
Environment monitoring systems
UPCOM
UP-Guard Environmental
Monitoring
Upcom UP-Guard products enables the environment monitoring and management of environment parameters to ensure the continuity of the operation of IT informatics infrastructures of small, medium and large scale System Rooms and Data Centers with a wide variety of sensor options and user-friendly interface.
Product Family
Upcom provides services to all kinds of public and institutional sectors of small, medium and large scale. From single rack cabinets to the most advanced Data Centers. Upcom offers reliable solutions for all your environment monitoring needs with our domestic production main-units, sensors and external 3rd party device integration with sufficient product range in all scales.
Ip pdu
IP-PDU is the latest scientific achievement of UPCOM after many years of dedicated research. On the trend of future power distribution management technology development, combining the technology requirement of the modern data center application environment, adopting key technology with fully independent intellectual property, the product is designed in combination of network communication, power distribution and network management and hot swappable technology.
Battery monitoring systems
Depending on battery type and application, Lead Acid batteries have a design life that can range from 5 to 20 years. That design life estimation is based on the battery being maintained in accordance with recommended practices, operating under ideal conditions and ensuring that any individual failing units are replaced before they impact the other units in the string.
However, in most installations, those conditions are seldom met, and the actual life of a battery may be closer to half of the published design life. This potential for failure has been confirmed in a number of studies over the years. In fact, in one Ponemon study into Data Center failures, the UPS Battery was responsible for over 50% of the reported outages. This data, and the uncertainty of most operating environments, confirms why battery monitoring is an essential part of maintaining today’s systems.
19 rack cabinet and accessories
The document describes rack cabinets and wall mounting cabinets. It provides details on their construction, including their dimensions, materials, load capacity, and certifications. It also lists accessories like shelves, fans, and power distribution units that can be added. Color and size options are given.
Mpo mtp multi-fiber cable assemblies
Trunk cable assemblies are a key component in today’s dense fiber optic networks. Standard cable styles and connectors are stocked and can be quickly assembled for your most pressing needs. Fiber Connections assembles trunk cables with any combination of multi-fiber and single fiber connectors. The finished assemblies save time and costs at the installation site.
Custom labeling is available to make installation clear and simple. Once completed and tested, each assembly is wound onto a shipping reel for quick and easy installation. A ruggedized pulling eye, offered as an option, provides protection for the connectors and easy installation.
Fanout assemblies fiber optic catalogue
LC Connector Compliance
IEC 61754-20, TIA 604-10-A, RoHS
SC Connector Compliance
IEC 61754-4, TIA 604-3, RoHS
Fiber Count
8 Fibers
Cable Diameter
3.0mm
Subunit Diameter
1.8mm
Alignment Technology
Full ceramic ferrule (Zirconia ZrO2)
Operating Temperature
-40°C to +85°C
Flammability
UL94 V-0
Durability
> 1000 mating cycles
Transmission with Applied Tensile Load
GR-326 CORE 4.4.3.5
Insertion Loss: IEC 61300-3-4-MB
Multimode: ≤ 0.40dB
Return Loss: IEC 61300-3-6-MB
Multimode: ≥ 40dB
Connector End Face Geometry
IEC 61755-3
Up guard sensor list
This document provides product information for various sensors and modules that are compatible with UP-Guard security and monitoring systems. It includes specifications for IP cameras, smoke detectors, magnetic contacts, PIR detectors, vibration sensors, proximity readers, proximity cards, signal towers, sirens, power adapters and many other sensors for temperature, humidity, air flow, flood detection, voltage monitoring, dry contacts, relays, alarms and more. Compatible devices include models UP-Guard3001, UP-Guard2001, UP-Guard6001 and others. Technical specifications like measurement ranges, tolerances, resolutions, maximum distances and compatible systems are provided for each product.
More from Fatih BATAL (20)
Recently uploaded
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Recently uploaded (20)
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
J v(zn)h 1x1 sx zip - Tight Buffer cable
- 1. This document is a property of UPCOM Telekom and must not be copied or damaged in any form, wholly or in part w/o written permission from UPCOM Telecom specifications indicated in this document are not contractual and can be modified w/o notification. Upcom Telekom Yenisehir Mah. Pendik Istanbul/Turkey Phone +9 (0) 535 765 1857 Fax +9 (0) 5412 / 541 - 220 1/2 Rev. no: 00 Publish Date: 11.04.2018www.upcom.com.tr 1. 900 mic. HFFR Sheath 2. 250 mic. Optical Fiber Coating and Color 3. 9/50/62,5 mic. Optical Fiber Core J-V(ZN)H 1x1 SX Zip Tight Buffer SX Patch-cord Single LSZH Jacket Indoor Type Fiber Optic Cable Overview - J-V(ZN)H 1x1 SX Zip Indoor Tight Buffer cable - J-V(ZN)H 1x1 SX Zip – is designed to make direct termination. It allows to users for easy and direct Termination Optical fibers in tight or semi-tight LSZH buffer with a diameter of Ø 0.9 mm. Compliance - DIN VDE 0888 Part 4; IEC 61034; IEC 60332-1&2; IEC 60754-2; IEC 60794-1&2 Application - Indoor Interconnect and Patchcord Applications - Pigtail and Jumper Connections - Indoor Interconnect and Patchcord Applications - Direct Connection to Terminal Equipments - Drop Cabling in Ftth Cabling - Used Inside Communication Equipment, Distribution Cabinets and - Frames Features and Benefits - Easy to Strip - Easy and Direct Termination - Low Installation Cost - Dry Design - All Dielectic - Halogen Free Fire Retardant
- 2. This document is a property of UPCOM Telekom and must not be copied or damaged in any form, wholly or in part w/o written permission from UPCOM Telecom specifications indicated in this document are not contractual and can be modified w/o notification. Upcom Telekom Yenisehir Mah. Pendik Istanbul/Turkey Phone +9 (0) 535 765 1857 Fax +9 (0) 5412 / 541 - 220 2/2 Rev. no: 00 Publish Date: 11.04.2018www.upcom.com.tr 1. 900 mic. HFFR Sheath 2. 250 mic. Optical Fiber Coating and Color 3. 9/50/62,5 mic. Optical Fiber Core Specification Fibers 1 Outer Jacket LSZH Colour Orange (MM62) / Blue (MM50) / Yellow (SM) Weight (kg/km) 0,9 Outer Ø (mm) 900 ±50 Tensile Load Perm/Inst(N) 10 Max. Length (m) 8000 Temperature Range -10 ºC to +60 ºC (IEC 60794-1-2 F1) Min. Bending Radius 20 x Outer Ø (IEC 60794-1-2 E11)