This document provides information about RollTek Engineering Works, an Indian manufacturing company with the following key details:
- The company has factories in India and a sales/engineering office in Detroit, Michigan.
- It produces a range of products including castings, measuring instruments, rollers, guides, spindles and other metal parts.
- Major customers include Qatar Steel and Morgan Foundry.
- The factory has a size of 4,000 square feet and annual sales of $6 million so far this year.
Bhumi Brass & Alloy is an ISO 9001:2008 certified manufacturer and exporter of brass components and industrial fittings located in Jamnagar, India. They produce a wide range of precision turned components, brass components, plug pins, brass inserts, industrial clamps, and other industrial products using quality materials and processes. The company was established in 2003 and services customers in India and the Middle East under the leadership of Mr. Tushar Khimasia.
Camtech Heavy Engineering Company is an Indian company that manufactures and supplies technological equipment and spare parts for the steel industry. The company focuses on equipment for continuous casting, rolling mills, bar mills, tube mills, and finishing lines. It also intends to expand into galvanizing lines and cut-to-length lines. Camtech supplies products like zinc boxes, rolls, tanks, and other spare parts to customers around the world. The company aims to achieve customer satisfaction by providing quality engineering products and services.
Industrial training at opto electronics factory,dehradunSaurabh pasbola
The document provides an overview of industrial training at the Opto Electronics Factory in Dehradun, India. It discusses the history and components of the factory, including lathes and machines used. It describes lathe parts and operations like turning, drilling and threading. The introduction of CNC machining is covered, along with programming languages used and advantages of CNC over traditional machining methods.
The document provides tips for designing weld fixtures, including:
- Using hex bolts and jam nuts to adjust clamp pressure on production parts.
- Attaching lanyards to removable fixture parts to prevent loss.
- Incorporating RAPid Blocks and Shims to position and hold locating pins, rest pads, and production parts during welding and testing.
- Designing pivot points, adjustable fingers, and clearance around corners for different clamping situations.
- Adding adjustability using shoulder screws, set screws, and shims to precisely position parts as needed.
This document provides information on lever handles made of stainless steel, including:
1. It describes the applications and high quality of KARCHER lever handles.
2. It explains that KARCHER develops innovative designs through in-house designers and engineers that combine functionality and quality.
3. It outlines that KARCHER provides consultation services and aims for quick delivery through stocking products.
Construction Diamond Tools - GENERAL CATALOG (SAWS / DRILLS/ CHAINS)Yan Mashov
TOOLGAL’S CONSTRUCTION DIAMOND TOOLS
In the construction industry, concrete and concrete-like materials are often required to be processed, cut or demolished. Toolgal is a leading provider of diamond cutting and drilling tools for a wide variety of applications in the construction industry.
Typical applications of Toolgal tools include:
Concrete cutting and drilling
Asphalt and green concrete cutting
Pre-stressed concrete cutting
Concrete brick cutting
Grinding
Toolgal’s metallurgical know-how and ongoing commitment to R&D ensures our offerings provide state-of-the-art technical solutions using the highest quality diamond cutting tools. Toolgal’s advanced technologies and professional tools will help enhance and improve all of your organization construction processes.
Manufacturers, exporters and traders of a varied range of Industrial Clamp Devices, Grinding Accessories and allied products Touch Point Sensor, Ang Fixed Milling Vise, 3 Way Angle Milling Vise, Hydraulic Machine Vise Build Out Type.
Bhumi Brass & Alloy is an ISO 9001:2008 certified manufacturer and exporter of brass components and industrial fittings located in Jamnagar, India. They produce a wide range of precision turned components, brass components, plug pins, brass inserts, industrial clamps, and other industrial products using quality materials and processes. The company was established in 2003 and services customers in India and the Middle East under the leadership of Mr. Tushar Khimasia.
Camtech Heavy Engineering Company is an Indian company that manufactures and supplies technological equipment and spare parts for the steel industry. The company focuses on equipment for continuous casting, rolling mills, bar mills, tube mills, and finishing lines. It also intends to expand into galvanizing lines and cut-to-length lines. Camtech supplies products like zinc boxes, rolls, tanks, and other spare parts to customers around the world. The company aims to achieve customer satisfaction by providing quality engineering products and services.
Industrial training at opto electronics factory,dehradunSaurabh pasbola
The document provides an overview of industrial training at the Opto Electronics Factory in Dehradun, India. It discusses the history and components of the factory, including lathes and machines used. It describes lathe parts and operations like turning, drilling and threading. The introduction of CNC machining is covered, along with programming languages used and advantages of CNC over traditional machining methods.
The document provides tips for designing weld fixtures, including:
- Using hex bolts and jam nuts to adjust clamp pressure on production parts.
- Attaching lanyards to removable fixture parts to prevent loss.
- Incorporating RAPid Blocks and Shims to position and hold locating pins, rest pads, and production parts during welding and testing.
- Designing pivot points, adjustable fingers, and clearance around corners for different clamping situations.
- Adding adjustability using shoulder screws, set screws, and shims to precisely position parts as needed.
This document provides information on lever handles made of stainless steel, including:
1. It describes the applications and high quality of KARCHER lever handles.
2. It explains that KARCHER develops innovative designs through in-house designers and engineers that combine functionality and quality.
3. It outlines that KARCHER provides consultation services and aims for quick delivery through stocking products.
Construction Diamond Tools - GENERAL CATALOG (SAWS / DRILLS/ CHAINS)Yan Mashov
TOOLGAL’S CONSTRUCTION DIAMOND TOOLS
In the construction industry, concrete and concrete-like materials are often required to be processed, cut or demolished. Toolgal is a leading provider of diamond cutting and drilling tools for a wide variety of applications in the construction industry.
Typical applications of Toolgal tools include:
Concrete cutting and drilling
Asphalt and green concrete cutting
Pre-stressed concrete cutting
Concrete brick cutting
Grinding
Toolgal’s metallurgical know-how and ongoing commitment to R&D ensures our offerings provide state-of-the-art technical solutions using the highest quality diamond cutting tools. Toolgal’s advanced technologies and professional tools will help enhance and improve all of your organization construction processes.
Manufacturers, exporters and traders of a varied range of Industrial Clamp Devices, Grinding Accessories and allied products Touch Point Sensor, Ang Fixed Milling Vise, 3 Way Angle Milling Vise, Hydraulic Machine Vise Build Out Type.
RollTek Engineering Works is a supplier of rolling mill spare parts located in Mumbai, India and Northville, Michigan. It has a factory size of 4,000 square feet and annual sales of $6 million. It provides various spare parts for rolling mills, including roller guides, spindles, conveyor rollers, and other parts. It can provide quotes within 48 to 72 hours and has key customers in India, UAE, and Qatar.
Ensuring Extrusion Product Quality at Die Design StageAltair
Thumb Tool & Engineering uses HyperXtrude simulation software to test extrusion die designs and analyze problems, allowing corrections to be tested virtually before modifying physical dies. Two example dies are described - die #3902 for extruding aluminum had contour issues that were corrected through three simulated design iterations. Die #Cobr for a large U-shaped extrusion also had uneven flow that was addressed with a second simulated design. The software allows dies to be reworked without building new physical tools, saving time and costs.
We are one of the leading Manufacturer and Exporter comprehensive assortment of various types of Industrial Dies.Apart from this, we are engaged in manufacturing high quality Collets and Bushes.
The document provides a history of Ramsey Industries, which was established in 1945 to serve the oil and gas industry. It later expanded through acquisitions of Auto Crane in 1987 and Eskridge in 2008. The company designs and manufactures cranes, winches, drives, and other equipment for industries such as oil/gas, construction, mining, and utilities. It has grown through continuous innovation including new products, manufacturing improvements, and serving customers through distribution partners and original equipment manufacturers.
DRILLING ACCESSORIES - PRD RIGS INDIA
We manufacture DTH Hammers in different sizes ranging from 3″ to 18″.These hammers are made corresponding to Drilling Hammers to carry out prevalent objectives. These hammers are used in various down the hole operations like bench drilling, foundation drilling, underground production drilling (mining), exploration and civil engineering applications (water well drilling) and many more.
DTH Hammers are available in valve-less model and is competent to operate in harsh conditions. These hammers are conserves energy and offers low cost maintenance. It is extensively used in various sectors owing to its uncomplicated and convenient re-assembly and dis-assembly operations.
We also produce Bits that are sturdy heavy duty tools with simple design.They are designed for maximum performance and for easy maintenance at a minimum cost. Our Bits provide more cutting power and faster rates with heat treatment and tight controlled machining tolerances. Our Bits are available in various models and designs as per the industrial applications.
Our Pole Drill Hammers and Bits are ideally made of superior quality raw material, with an inbuilt characteristic of performing with precision in their specified application. They are long lasting, durable and easily maintainable.
Tata Steel was established in 1907 in Jamshedpur, India as the country's first integrated steel plant. It has since expanded its annual production capacity to 10 million tons. Tata Steel produces a wide range of steel products under high quality standards to serve the construction, engineering, and automotive sectors in India and globally. One of its product lines is Tata Structura steel hollow sections which are manufactured in various shapes and sizes for architectural, infrastructure, industrial, and general engineering applications.
We specialize in the manufacturing and rebuilding of screws, barrels, removable mixers, tips, end caps, nozzles, and a large variety of other specialized machining components, including augers, tie bars, and rotors.
SP-401-EN_ATG-Aerospace_Assembly-Catalog-LRSean Ibrahim
- Apex Tool Group is a global manufacturer of tools for the aerospace industry, with sales of $1.5 billion and 27 plants worldwide.
- They have provided tools to the aerospace market since the 1940s, including innovations designed for stringent aerospace standards to improve productivity and ensure quality.
- Their drilling, screwing, riveting, and material removal tools are constantly evolving for more productivity, precision, security, traceability and connectivity.
Cortec Early Supplier Developemental Input, 3 26 2012revjoev
The document discusses Cortec Precision Sheetmetal's Early Supplier Developmental Input (ESDI) program. The ESDI program provides risk assessment and feedback on new product designs early in the development process. This includes feedback on materials selection, manufacturability, quality, and cost. The program aims to identify potential issues prior to manufacturing to enable a smoother production process. Cortec Precision can review requests for quotes and provide feedback and alternative suggestions to minimize costs. Their expertise helps ensure materials will work well and products can be made efficiently according to specifications.
PTI manufactures mounted bearings and power transmission products globally. They offer a broad range of metric and American standard housed units, including mounted ball bearings, spherical roller bearings, and split pillow blocks. PTI is headquartered in North Carolina and has a large warehouse and manufacturing facilities with capabilities for engineering, design, inspection, and global sourcing and production.
Manufacturer and Supplier of Coach Screw and Plug, Concrete Screws, Torx Driver Bit, Nylon Frame Anchors, Heavy Duty Projecting Bolt, Heavy Duty Anchor Countersunk.
VAID ENGINEERING INDUSTRIES - Manufacturer,exporter,sup plier of cold rolling mills,4 hi cold rolling mill,2 hi cold rolling mill from India. Visit us for cold rolling mills manufacturers,cold rolling mills suppliers,exporters
Baoji Mingkun Nonferrous Metal co., ltd is a leading manufacturer of titanium and titanium alloy products established in 2007. They specialize in plates, bars, pipes, wire and special-shaped pieces made from titanium, tantalum, nickel, zirconium, niobium, and their alloys. Their products serve markets such as oilfield, marine, automotive, industrial, and military through manufacturing processes like forging, rolling, and machining of titanium grades including Grade 1, 2, 5, 7, and 9.
This document provides an overview of BRG Group, an Indian stainless steel manufacturer. It describes BRG's integrated value chain from mineral extraction to finished products. It highlights BRG's manufacturing capabilities and product range including modular kitchens, sinks, furniture and architectural items. The document also outlines BRG's value proposition such as technical expertise, quality assurance processes, and single roof solutions.
Avalon Precision Metalsmiths is an investment casting company with over 75 years of experience. Investment casting, also known as lost wax casting, offers advantages over other processes like tighter tolerances, lower costs for long runs, and greater precision. Avalon provides investment casting services for a wide range of materials and industries, with certifications in quality standards. They produce precision cast components within tight tolerances for applications across various sectors.
This document provides guidelines for shelf life and storage of grease-lubricated bearings, components, and assemblies from Timken. It states that shelf life represents the time prior to use and is separate from overall design life, and can be less depending on storage conditions. Timken's shelf life guidelines assume best storage practices are followed, including keeping products in original packaging, storing in a temperature and humidity controlled area away from contaminants and vibration, and not exceeding the stated shelf life. Adhering to these storage conditions helps maximize the time products can be kept before use.
Established in the year 2015, at Kundli, (Haryana, India), we “Imperial Industries” are a “Partnership Firm” and well-renowned manufacturer, service provider , exporter of CNC Laser cutting services , CNC Bending Services , CNC Panal Bender Services , Sheet metal Fabrication services, Precise Metal Components & Products etc..
Our mentors “Shivam Aggarwal (Owner) and Shrikant Kaushik (Sr. manager)” always motivates us with his competent capabilities and assists us to achieve commendable position in the market. We are not just regular metal cutting unit, but a team of talented engineers and designers, who can help you create a variety of things with our industry leading machines.
We can implement you respected projects with the best quality and prompt delivery time as we have all the infrastructure under one roof .
More Related Content
Similar to Introduction To Rolltek Engineering Works 11 05 09
RollTek Engineering Works is a supplier of rolling mill spare parts located in Mumbai, India and Northville, Michigan. It has a factory size of 4,000 square feet and annual sales of $6 million. It provides various spare parts for rolling mills, including roller guides, spindles, conveyor rollers, and other parts. It can provide quotes within 48 to 72 hours and has key customers in India, UAE, and Qatar.
Ensuring Extrusion Product Quality at Die Design StageAltair
Thumb Tool & Engineering uses HyperXtrude simulation software to test extrusion die designs and analyze problems, allowing corrections to be tested virtually before modifying physical dies. Two example dies are described - die #3902 for extruding aluminum had contour issues that were corrected through three simulated design iterations. Die #Cobr for a large U-shaped extrusion also had uneven flow that was addressed with a second simulated design. The software allows dies to be reworked without building new physical tools, saving time and costs.
We are one of the leading Manufacturer and Exporter comprehensive assortment of various types of Industrial Dies.Apart from this, we are engaged in manufacturing high quality Collets and Bushes.
The document provides a history of Ramsey Industries, which was established in 1945 to serve the oil and gas industry. It later expanded through acquisitions of Auto Crane in 1987 and Eskridge in 2008. The company designs and manufactures cranes, winches, drives, and other equipment for industries such as oil/gas, construction, mining, and utilities. It has grown through continuous innovation including new products, manufacturing improvements, and serving customers through distribution partners and original equipment manufacturers.
DRILLING ACCESSORIES - PRD RIGS INDIA
We manufacture DTH Hammers in different sizes ranging from 3″ to 18″.These hammers are made corresponding to Drilling Hammers to carry out prevalent objectives. These hammers are used in various down the hole operations like bench drilling, foundation drilling, underground production drilling (mining), exploration and civil engineering applications (water well drilling) and many more.
DTH Hammers are available in valve-less model and is competent to operate in harsh conditions. These hammers are conserves energy and offers low cost maintenance. It is extensively used in various sectors owing to its uncomplicated and convenient re-assembly and dis-assembly operations.
We also produce Bits that are sturdy heavy duty tools with simple design.They are designed for maximum performance and for easy maintenance at a minimum cost. Our Bits provide more cutting power and faster rates with heat treatment and tight controlled machining tolerances. Our Bits are available in various models and designs as per the industrial applications.
Our Pole Drill Hammers and Bits are ideally made of superior quality raw material, with an inbuilt characteristic of performing with precision in their specified application. They are long lasting, durable and easily maintainable.
Tata Steel was established in 1907 in Jamshedpur, India as the country's first integrated steel plant. It has since expanded its annual production capacity to 10 million tons. Tata Steel produces a wide range of steel products under high quality standards to serve the construction, engineering, and automotive sectors in India and globally. One of its product lines is Tata Structura steel hollow sections which are manufactured in various shapes and sizes for architectural, infrastructure, industrial, and general engineering applications.
We specialize in the manufacturing and rebuilding of screws, barrels, removable mixers, tips, end caps, nozzles, and a large variety of other specialized machining components, including augers, tie bars, and rotors.
SP-401-EN_ATG-Aerospace_Assembly-Catalog-LRSean Ibrahim
- Apex Tool Group is a global manufacturer of tools for the aerospace industry, with sales of $1.5 billion and 27 plants worldwide.
- They have provided tools to the aerospace market since the 1940s, including innovations designed for stringent aerospace standards to improve productivity and ensure quality.
- Their drilling, screwing, riveting, and material removal tools are constantly evolving for more productivity, precision, security, traceability and connectivity.
Cortec Early Supplier Developemental Input, 3 26 2012revjoev
The document discusses Cortec Precision Sheetmetal's Early Supplier Developmental Input (ESDI) program. The ESDI program provides risk assessment and feedback on new product designs early in the development process. This includes feedback on materials selection, manufacturability, quality, and cost. The program aims to identify potential issues prior to manufacturing to enable a smoother production process. Cortec Precision can review requests for quotes and provide feedback and alternative suggestions to minimize costs. Their expertise helps ensure materials will work well and products can be made efficiently according to specifications.
PTI manufactures mounted bearings and power transmission products globally. They offer a broad range of metric and American standard housed units, including mounted ball bearings, spherical roller bearings, and split pillow blocks. PTI is headquartered in North Carolina and has a large warehouse and manufacturing facilities with capabilities for engineering, design, inspection, and global sourcing and production.
Manufacturer and Supplier of Coach Screw and Plug, Concrete Screws, Torx Driver Bit, Nylon Frame Anchors, Heavy Duty Projecting Bolt, Heavy Duty Anchor Countersunk.
VAID ENGINEERING INDUSTRIES - Manufacturer,exporter,sup plier of cold rolling mills,4 hi cold rolling mill,2 hi cold rolling mill from India. Visit us for cold rolling mills manufacturers,cold rolling mills suppliers,exporters
Baoji Mingkun Nonferrous Metal co., ltd is a leading manufacturer of titanium and titanium alloy products established in 2007. They specialize in plates, bars, pipes, wire and special-shaped pieces made from titanium, tantalum, nickel, zirconium, niobium, and their alloys. Their products serve markets such as oilfield, marine, automotive, industrial, and military through manufacturing processes like forging, rolling, and machining of titanium grades including Grade 1, 2, 5, 7, and 9.
This document provides an overview of BRG Group, an Indian stainless steel manufacturer. It describes BRG's integrated value chain from mineral extraction to finished products. It highlights BRG's manufacturing capabilities and product range including modular kitchens, sinks, furniture and architectural items. The document also outlines BRG's value proposition such as technical expertise, quality assurance processes, and single roof solutions.
Avalon Precision Metalsmiths is an investment casting company with over 75 years of experience. Investment casting, also known as lost wax casting, offers advantages over other processes like tighter tolerances, lower costs for long runs, and greater precision. Avalon provides investment casting services for a wide range of materials and industries, with certifications in quality standards. They produce precision cast components within tight tolerances for applications across various sectors.
This document provides guidelines for shelf life and storage of grease-lubricated bearings, components, and assemblies from Timken. It states that shelf life represents the time prior to use and is separate from overall design life, and can be less depending on storage conditions. Timken's shelf life guidelines assume best storage practices are followed, including keeping products in original packaging, storing in a temperature and humidity controlled area away from contaminants and vibration, and not exceeding the stated shelf life. Adhering to these storage conditions helps maximize the time products can be kept before use.
Established in the year 2015, at Kundli, (Haryana, India), we “Imperial Industries” are a “Partnership Firm” and well-renowned manufacturer, service provider , exporter of CNC Laser cutting services , CNC Bending Services , CNC Panal Bender Services , Sheet metal Fabrication services, Precise Metal Components & Products etc..
Our mentors “Shivam Aggarwal (Owner) and Shrikant Kaushik (Sr. manager)” always motivates us with his competent capabilities and assists us to achieve commendable position in the market. We are not just regular metal cutting unit, but a team of talented engineers and designers, who can help you create a variety of things with our industry leading machines.
We can implement you respected projects with the best quality and prompt delivery time as we have all the infrastructure under one roof .
Similar to Introduction To Rolltek Engineering Works 11 05 09 (20)
Introduction To Rolltek Engineering Works 11 05 09
1. India
Shanta Industrial Estate
I. B. Patel Road, # 37
Goregaon East,
Mumbai- 400063
India
USA Sales / Engineering office
Detroit-Michigan
Provides onsite support
Factory Size: 4,000 sq feet.
Total Sale Annual: Year to date $ 6M
Confidential RollTek
Engineering Works
2. INTRODUCTION TO ROLLTEK ENGINEERING WORKS
Foundries:
Developed Foundry for S.G.I. Castings which meets US Standard.
Morgan
(India ) also buys complete requirements .
Facilities for all types of ferrous and non-ferrous castings locally .
Measuring Instruments:
Complete range of Measuring Instruments for manufacturing as well as
for Inspection.
Capability of CMM measurements
Quote Timing:
RollTek Engineering Works provides quotes within 48 to 72 upon
receiving inquiry for an RFQ.
Confidential RollTek
Engineering Works
3. INTRODUCTION TO ROLLTEK ENGINEERING WORKS
Key Customer:
Qatar Steel Company (Dubai)
Advantages:
Cost advantages to current suppliers.
Part fits to current equipment / with no additional parts needed.
All parts will fit to current Ashlow / Morgan or other manufacturing equipment build types.
REW Roller guides are manufactured from a single piece casting (housing and roller holders) this
design provides with a higher accuracy and a longer lasting part.
Other parts Manufactured at site:
Spindles
Conveyor Rollers
Shafts for applications
Non-Ferrous Bushings
Chockes
Liner plates
Sprockets
Gears
Shaft set Fasteners
Spacers (Shims)
Confidential RollTek
Engineering Works
4. Roller Guide Box No 210 Conventional type to finish rounds Max190mmDia
Roller View
Confidential RollTek
Engineering Works
5. Roller Guide box no 0820 Cassette type design with frame to finish rounds max 14mm
diameter
Confidential RollTek
Engineering Works
6. Roller Guide Box No 0820 , 0830 & 45. The Guide Box 0820 & 0830 are Cassette type
where as Guide box No 45 is the Conventional type. Capacity of 0820 is to finish max dia
14 mm , 0830 to finish 22 mm and box 45 is to finish maximum 35 mm dia.
Confidential RollTek
Engineering Works
7. Roller guide box no 0820 cassette type with Frame to mount the Roller guide
Box on the Rest bar.
Confidential RollTek
Engineering Works
8. Roller guide box No 45 but Conventional type
Confidential RollTek
Engineering Works
9. R.G. Box No 0845 angle view
Confidential RollTek
Engineering Works
10. Roller Guide Box No 0845 Cassette design with frame
Confidential RollTek
Engineering Works
11. 2 Roller guide box No 0835 (Heavy Duty New Design ) supplied to Qatar Steel Doha Qatar Units.
Confidential RollTek
Engineering Works
12. Roller guide box No 0860 Cassette type with Frame capacity to finish rounds
maximum 45 mm diameter.
Front View
Confidential RollTek
Engineering Works
13. Roller guide box 45 another view
Confidential RollTek
Engineering Works
14. Same as above Roller view
Confidential RollTek
Engineering Works
15. Grooved Hardened and Ground D2 Quality Roller guide box No 0830, 0845, 0860,0885
Confidential RollTek
Engineering Works
16. Twister Rollers D2 quality for Roughing and finishing design Roller guide box.
Confidential RollTek
Engineering Works
17. Twister roller D2 quality for Roughing and finishing Mill Guide RS6C
Side view
Confidential RollTek
Engineering Works
18. NTM Delivery Strippers with Saddle for mounting. Material: Special Composition of Stainless Steel
to withstand Wear & tear at high speed without scratching the Bars.
Confidential RollTek
Engineering Works
19. Entry & Exit Guide (Strippers ) for Ovals, Rounds, Preovals, RCS, Squares and Diamond
sizes range from 30 mm to 190 mm
Confidential RollTek
Engineering Works
20. Same as SR No: 1 entry side view
Confidential RollTek
Engineering Works
21. Forged CK45 Grade Spindle for 8", 10", 12" 16" 18" 20" Mill
Confidential RollTek
Engineering Works
22. Housing design roller guide box size RE7
Side View
Confidential RollTek
Engineering Works
23. Same as SR No:1
Confidential RollTek
Engineering Works
24. Same as SR No: 4
Confidential RollTek
Engineering Works