The inspissator is a convenient and effective system designed to produce large batches of uniform tuberculosis culture medium four to six times per day. Visit our Site Order Online.
Heating incubators comes with polished stainless-steel chamber. Designed with inner glass door, helps in observing changes occurring in the specimen kept
inside during incubation. Heating incubators are equipped with microprocessor-based PID controller for timing functions and controlling temperature parameter.
it delivers a higher level of performance for storage of mould and biological cultivations.
Lighting Incubator is a 2 side light illuminating incubator runs under microprocessor PID control system with lighting illumination of 0 to 12000 lx. Offers two types of temperature control range: with illumination 10 °C to 50 °C and without illumination 5 °C to 50 °C.
Constant Temperature Incubator NCTI-100 is a laboratory incubator with forced air convection that maintains controlled heat distribution throughout the chamber.
Equipped with PID intelligent controller,
integrated LCD, programmable alarm system and customized temperature setting makes it easier for the user to achieve the required conditions
Laboratory Refrigerator Freezer is an ergonomically designed cold storage system with combined top refrigerator and bottom freezer.
It is a microprocessor-controlled system that enables effective and safe storage of medicines and chemicals, immunological kits, laboratory media
and many other biological materials, etc. It is equipped with a visual and audible alarm system ensuring the safety of the equipment against power or
thermostat failure.
Slide Dryer is a compact dryer unit for drying the paraffin tissue section mounting purpose. Temperature of dryer is
microprocessor controlled. Equipped with thermal heaters for even heat transfer. LED display screen is used for
adjusting and viewing the temperature of the unit. It is ideally used in cytology, histology, pathology and biology
for paraffin tissue section mounting.
-60°C Chest Freezer is a high-efficient refrigeration system comprised 150 L multigrade deep chest freezer. Features high-precision microprocessor control
system with platinum resistor temperature sensors for -30 to -60°C of temperature control range.Incorporated with international
branded compressor and EBM fan with large finned condenser, is provided with manual defrost mode and mixture gas refrigerant.
Platelet Incubator is a continuous side-to-side motion agitation incubator which operates at a temperature range of 4°C to 26°C with one agitation chamber.
Heating incubators comes with polished stainless-steel chamber. Designed with inner glass door, helps in observing changes occurring in the specimen kept
inside during incubation. Heating incubators are equipped with microprocessor-based PID controller for timing functions and controlling temperature parameter.
it delivers a higher level of performance for storage of mould and biological cultivations.
Lighting Incubator is a 2 side light illuminating incubator runs under microprocessor PID control system with lighting illumination of 0 to 12000 lx. Offers two types of temperature control range: with illumination 10 °C to 50 °C and without illumination 5 °C to 50 °C.
Constant Temperature Incubator NCTI-100 is a laboratory incubator with forced air convection that maintains controlled heat distribution throughout the chamber.
Equipped with PID intelligent controller,
integrated LCD, programmable alarm system and customized temperature setting makes it easier for the user to achieve the required conditions
Laboratory Refrigerator Freezer is an ergonomically designed cold storage system with combined top refrigerator and bottom freezer.
It is a microprocessor-controlled system that enables effective and safe storage of medicines and chemicals, immunological kits, laboratory media
and many other biological materials, etc. It is equipped with a visual and audible alarm system ensuring the safety of the equipment against power or
thermostat failure.
Slide Dryer is a compact dryer unit for drying the paraffin tissue section mounting purpose. Temperature of dryer is
microprocessor controlled. Equipped with thermal heaters for even heat transfer. LED display screen is used for
adjusting and viewing the temperature of the unit. It is ideally used in cytology, histology, pathology and biology
for paraffin tissue section mounting.
-60°C Chest Freezer is a high-efficient refrigeration system comprised 150 L multigrade deep chest freezer. Features high-precision microprocessor control
system with platinum resistor temperature sensors for -30 to -60°C of temperature control range.Incorporated with international
branded compressor and EBM fan with large finned condenser, is provided with manual defrost mode and mixture gas refrigerant.
Platelet Incubator is a continuous side-to-side motion agitation incubator which operates at a temperature range of 4°C to 26°C with one agitation chamber.
The document discusses Rittal's Blue e+ line of wall-mounted cooling units. It summarizes the key principles and benefits of the units as being up to 75% energy savings through efficient components, versatility through multi-voltage capability for worldwide use, longer service life through gentle cooling, and intuitive operation via touch display. It also provides specifications for various models in the Blue e+ series.
The document describes several incubator models from EN300 to EN500P. The incubators provide precise temperature control from ambient +5°C to 80°C using a PID microprocessor system. They are suitable for biology and microbiology labs. Key features include a user-friendly interface, various temperature alarms and safety controls, and stainless steel or aluminum interiors. Technical specifications provide internal dimensions, temperature ranges and controls for each model.
Constant Temperature Water Bath is a thermostatic water bath comprising nature water convection heat transfer configuration with stainless steel heating tube,
offers temperature range of RT +5°C to 100°C with fixed temperature operation and timing function. Features stretching inner chamber with 3.4 L of capacity
along with roof cover, and one-button operation. Incorporated PID temperature controller and NTC sensor with digital tube display, ensures precise auxiliary
and constant temperature. With timing wait function, auto stop function and over temperature alarm, it also offers deviation correction, menu key locked,
power failure back-up and power-off memory. Designed with cold – rolled steel plate outer shell, single shelf, single hole and chemical reagent resistance
surface coating, this water bath automatically stops working on water shortage to ensure safe product operation.
Weiber is one of Bench top Muffle Furnace manufacturers in India and Asia, providing muffle furnace ideal for laboratories, research centres, and medical sector, pharmaceutical and other industries.
Biochemical Incubator NBCI-100 is a microprocessor-controlled unit with automatic control for hot and cold conditions and offers 300 L capacity.
It is made up of stainless steel chamber and contains a removable shelf for easy cleaning.
We are manufacturing Weiber BOD Incubators and Lab Ovens for varied usages in various research and R&D laboratories across India and abroad. We are committed to provide international standard Bacteriological Incubator at reasonable prices, working closely with the industry captains and leading scientists to continuously improve and enhance the quality, reliability and efficiency of our products by incorporating various inputs provided by them, from time to time. For More Information Please Logon http://goo.gl/Xa4Je1
Bench top High temperature muffles furnaces offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. Open coil heating elements on both sides of chamber enable rapid heating with minimal temperature gradient of 1400°C. For More Information Please Logon http://goo.gl/uSxLlW
The document describes ES Series Cooled Incubators that can maintain temperatures between -10°C and +60°C for use in biology, zoology, botany, and quality control laboratories. The incubators have stainless steel interiors and exteriors with high-density polyurethane insulation. They include features like triple-glass doors, interior lighting, temperature alarms, timers, and microprocessor controls. Specifications are provided for two models: the ES 120 with a 120-liter chamber and the ES 252 with a 252-liter chamber.
Computerized bench-top muffle furnace is a CE certified & computerized benchtop high temperature muffle furnace with laptop and pre-installed control software.
LABOZ Inc. is the leading manufacturer, supplier, and exporter of Laboratory Products, Medical Products, Dental Equipments, autoclaves, and Dental Chairs such as 3 Ply Face Mask, Digital Glucometer, Cotton Medical Apron and much more. Our company is based in Ghaziabad, Uttar Pradesh and was established in the year 2010. Our utmost priority is to provide quality products to our customers and also first-class customer services. Healthcare equipment and supplies are prohibitively expensive for several caregiving facilities and there is an extreme lack of responsiveness and transparency.
The -105°C Ultra low chest freezers are designed using four casters for easy handling and
the lockable door to prevent unauthorized access. The inner door of these -105°C Ultra low
chest freezers have double silicon gasket seal to prevent loss of cold air. These ultra low
temperature freezers gives high-performance and excellent quality, complied with CE,
ISO9001, ISO14001, ISO13485 standards. Its equipped with powerful system for keeping
the stored bulkier products frozen and preserved for a long duration. It comes in 138 L, 328L
capacity & equipped with CFC-free Danfoss compressor and mixture of refrigerant. They
are equipped with audio and visual alarm for power failure and system failure.
6 Hole Thermostatic Bath is a 19.3 L bottom heating bath with a temperature range of 5 °C ~ 100 °C. Water sink is surface electrolysis treated with cold
rolled outer shell. Equipped with multi-section programmed control, touch button temperature setting mode and 3 digit temperature display. Easy to use controls
allow the user to monitor and set temperature and time. Easy to use functions like deviation
The document describes three options for laboratory freezers:
1) A dual-temperature refrigerator and freezer that provides both refrigerated and frozen storage in one compact unit with two independently controlled temperature zones.
2) Smaller economy laboratory freezers ranging in size from 90 to 300 liters for general storage of non-critical products without alarms or monitoring.
3) High-performance freezers designed for stringent reliability and safety standards, incorporating electronic controllers, accurate components, and automatic defrost for critical sample storage down to -35°C.
The document is a product catalogue from LABSOL Enterprises, an Indian manufacturer and supplier of laboratory equipment. It was established in 2009 and produces items like autoclaves, biosafety cabinets, and air showers. The products are high quality and used in various industries. The company has large facilities for manufacturing, quality control, warehousing, and transportation of products. It aims to deliver products globally on time and has an experienced director leading the business.
This document describes two types of incubators: a cooling incubator and a heating incubator. The cooling incubator is for storing cultures, serum, medicine, and microorganism training. It has a polished stainless steel chamber with adjustable shelves. The heating incubator is for scientific research in colleges and labs for mold storage and biology cultivation. It has an independent temperature alarm system and optional printer/computer connections for parameter recording. Both have microprocessor controllers.
This document provides information on various incubator products from Sheldon Manufacturing, including microbiological incubators, refrigerated incubators, CO2 incubators, humidity cabinets, shaking incubators, and more. It includes specifications and descriptions of different models. Sheldon Manufacturing is an ISO certified manufacturer of constant temperature equipment for life sciences, pharmaceutical, biomedical, and industrial applications.
The document describes salt spray chamber testing equipment. It provides specifications for several models of salt spray chambers, including model numbers 101A, 101B, 102A, and 102B. The chambers are designed to test corrosion resistance according to various standards like ASTM B117. Key features include a stainless steel interior, temperature control between ambient and 60 degrees Celsius, a programmable timer up to 999 hours, and an air regulator from 0 to 30 psi. The document lists components included and electrical requirements of 3KW for single phase 220V 50Hz power.
Testing/Manufacture/Salt Spray Test Chamber fec2020
The document describes salt spray chamber testing equipment. It provides specifications for various models of salt spray chambers, including model numbers 101A, 101B, 102A, and 102B. The chambers have stainless steel interiors and are designed to test corrosion resistance according to various standards like ASTM B117. Key features include temperature control between ambient and 60 degrees Celsius, atomizers to produce salt spray, and separate control panels.
Labotronics microplate luminometer features a counter-type tube for detecting glowing luminescence, with a wavelength
range of 300 nm to 650 nm. It offers a measurement increment of 1 RLU and supports parallel assay of samples.
The water activity meter has a measurement range of 4 to 40 minutes and can operate within a temperature range
of -10 to 50°C. It features an LCD display for improved setting adjustments and operational monitoring. It can
be used to measure liquids, solids, and powders.
Labotronics spirometer is a lung function test device featuring a 7 inch touch screen capable of storing up to 10,000 data groups. It offers multiple functions for precise measurements, with a volume range of 0 to 10 liters (FVC).
More Related Content
Similar to Inspissator.............pdf.............
The document discusses Rittal's Blue e+ line of wall-mounted cooling units. It summarizes the key principles and benefits of the units as being up to 75% energy savings through efficient components, versatility through multi-voltage capability for worldwide use, longer service life through gentle cooling, and intuitive operation via touch display. It also provides specifications for various models in the Blue e+ series.
The document describes several incubator models from EN300 to EN500P. The incubators provide precise temperature control from ambient +5°C to 80°C using a PID microprocessor system. They are suitable for biology and microbiology labs. Key features include a user-friendly interface, various temperature alarms and safety controls, and stainless steel or aluminum interiors. Technical specifications provide internal dimensions, temperature ranges and controls for each model.
Constant Temperature Water Bath is a thermostatic water bath comprising nature water convection heat transfer configuration with stainless steel heating tube,
offers temperature range of RT +5°C to 100°C with fixed temperature operation and timing function. Features stretching inner chamber with 3.4 L of capacity
along with roof cover, and one-button operation. Incorporated PID temperature controller and NTC sensor with digital tube display, ensures precise auxiliary
and constant temperature. With timing wait function, auto stop function and over temperature alarm, it also offers deviation correction, menu key locked,
power failure back-up and power-off memory. Designed with cold – rolled steel plate outer shell, single shelf, single hole and chemical reagent resistance
surface coating, this water bath automatically stops working on water shortage to ensure safe product operation.
Weiber is one of Bench top Muffle Furnace manufacturers in India and Asia, providing muffle furnace ideal for laboratories, research centres, and medical sector, pharmaceutical and other industries.
Biochemical Incubator NBCI-100 is a microprocessor-controlled unit with automatic control for hot and cold conditions and offers 300 L capacity.
It is made up of stainless steel chamber and contains a removable shelf for easy cleaning.
We are manufacturing Weiber BOD Incubators and Lab Ovens for varied usages in various research and R&D laboratories across India and abroad. We are committed to provide international standard Bacteriological Incubator at reasonable prices, working closely with the industry captains and leading scientists to continuously improve and enhance the quality, reliability and efficiency of our products by incorporating various inputs provided by them, from time to time. For More Information Please Logon http://goo.gl/Xa4Je1
Bench top High temperature muffles furnaces offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. Open coil heating elements on both sides of chamber enable rapid heating with minimal temperature gradient of 1400°C. For More Information Please Logon http://goo.gl/uSxLlW
The document describes ES Series Cooled Incubators that can maintain temperatures between -10°C and +60°C for use in biology, zoology, botany, and quality control laboratories. The incubators have stainless steel interiors and exteriors with high-density polyurethane insulation. They include features like triple-glass doors, interior lighting, temperature alarms, timers, and microprocessor controls. Specifications are provided for two models: the ES 120 with a 120-liter chamber and the ES 252 with a 252-liter chamber.
Computerized bench-top muffle furnace is a CE certified & computerized benchtop high temperature muffle furnace with laptop and pre-installed control software.
LABOZ Inc. is the leading manufacturer, supplier, and exporter of Laboratory Products, Medical Products, Dental Equipments, autoclaves, and Dental Chairs such as 3 Ply Face Mask, Digital Glucometer, Cotton Medical Apron and much more. Our company is based in Ghaziabad, Uttar Pradesh and was established in the year 2010. Our utmost priority is to provide quality products to our customers and also first-class customer services. Healthcare equipment and supplies are prohibitively expensive for several caregiving facilities and there is an extreme lack of responsiveness and transparency.
The -105°C Ultra low chest freezers are designed using four casters for easy handling and
the lockable door to prevent unauthorized access. The inner door of these -105°C Ultra low
chest freezers have double silicon gasket seal to prevent loss of cold air. These ultra low
temperature freezers gives high-performance and excellent quality, complied with CE,
ISO9001, ISO14001, ISO13485 standards. Its equipped with powerful system for keeping
the stored bulkier products frozen and preserved for a long duration. It comes in 138 L, 328L
capacity & equipped with CFC-free Danfoss compressor and mixture of refrigerant. They
are equipped with audio and visual alarm for power failure and system failure.
6 Hole Thermostatic Bath is a 19.3 L bottom heating bath with a temperature range of 5 °C ~ 100 °C. Water sink is surface electrolysis treated with cold
rolled outer shell. Equipped with multi-section programmed control, touch button temperature setting mode and 3 digit temperature display. Easy to use controls
allow the user to monitor and set temperature and time. Easy to use functions like deviation
The document describes three options for laboratory freezers:
1) A dual-temperature refrigerator and freezer that provides both refrigerated and frozen storage in one compact unit with two independently controlled temperature zones.
2) Smaller economy laboratory freezers ranging in size from 90 to 300 liters for general storage of non-critical products without alarms or monitoring.
3) High-performance freezers designed for stringent reliability and safety standards, incorporating electronic controllers, accurate components, and automatic defrost for critical sample storage down to -35°C.
The document is a product catalogue from LABSOL Enterprises, an Indian manufacturer and supplier of laboratory equipment. It was established in 2009 and produces items like autoclaves, biosafety cabinets, and air showers. The products are high quality and used in various industries. The company has large facilities for manufacturing, quality control, warehousing, and transportation of products. It aims to deliver products globally on time and has an experienced director leading the business.
This document describes two types of incubators: a cooling incubator and a heating incubator. The cooling incubator is for storing cultures, serum, medicine, and microorganism training. It has a polished stainless steel chamber with adjustable shelves. The heating incubator is for scientific research in colleges and labs for mold storage and biology cultivation. It has an independent temperature alarm system and optional printer/computer connections for parameter recording. Both have microprocessor controllers.
This document provides information on various incubator products from Sheldon Manufacturing, including microbiological incubators, refrigerated incubators, CO2 incubators, humidity cabinets, shaking incubators, and more. It includes specifications and descriptions of different models. Sheldon Manufacturing is an ISO certified manufacturer of constant temperature equipment for life sciences, pharmaceutical, biomedical, and industrial applications.
The document describes salt spray chamber testing equipment. It provides specifications for several models of salt spray chambers, including model numbers 101A, 101B, 102A, and 102B. The chambers are designed to test corrosion resistance according to various standards like ASTM B117. Key features include a stainless steel interior, temperature control between ambient and 60 degrees Celsius, a programmable timer up to 999 hours, and an air regulator from 0 to 30 psi. The document lists components included and electrical requirements of 3KW for single phase 220V 50Hz power.
Testing/Manufacture/Salt Spray Test Chamber fec2020
The document describes salt spray chamber testing equipment. It provides specifications for various models of salt spray chambers, including model numbers 101A, 101B, 102A, and 102B. The chambers have stainless steel interiors and are designed to test corrosion resistance according to various standards like ASTM B117. Key features include temperature control between ambient and 60 degrees Celsius, atomizers to produce salt spray, and separate control panels.
Similar to Inspissator.............pdf............. (19)
Labotronics microplate luminometer features a counter-type tube for detecting glowing luminescence, with a wavelength
range of 300 nm to 650 nm. It offers a measurement increment of 1 RLU and supports parallel assay of samples.
The water activity meter has a measurement range of 4 to 40 minutes and can operate within a temperature range
of -10 to 50°C. It features an LCD display for improved setting adjustments and operational monitoring. It can
be used to measure liquids, solids, and powders.
Labotronics spirometer is a lung function test device featuring a 7 inch touch screen capable of storing up to 10,000 data groups. It offers multiple functions for precise measurements, with a volume range of 0 to 10 liters (FVC).
The Miniature Data Logger is a compact electronic device tailored for recording and storing data from diverse sensors or inputs over time.
It boasts a small and lightweight design, ensuring suitability for applications with limited space or requiring portability. With memory
storage and built-in electronics, it captures and retains data continuously or at preset intervals. Featuring multiple input channels, it
accommodates various sensors, such as those for temperature, humidity, pressure, or other analog or digital signals. Known for its precision,
reliability, and battery-powered operation, it offers user-friendly functionality.
A light meter is a device used to measure the intensity of light in a given environment.
It typically consists of a sensor that detects light, a display unit, and control buttons
for operation. Light meters are commonly used in photography, cinematography, agriculture,
construction, and environmental monitoring to ensure proper lighting conditions or to
quantify light levels for various purposes.
The Benchtop UV Analyzer is a sophisticated instrument designed for accurate and efficient analysis of ultraviolet (UV) radiation.
This advanced device is specifically engineered for laboratory use, offering precise measurements and reliable data for a wide range
of applications.
A nitrogen oven, also known as a nitrogen evaporator or nitrogen concentrator,
is a specialized laboratory instrument used for sample preparation, particularly
in analytical chemistry applications.
The Clean Oven Crate is your solution for effortlessly maintaining a spotless oven.
Say goodbye to stubborn grease and grime with this comprehensive cleaning kit. Designed
to tackle even the toughest oven messes, this crate includes everything you need for a
thorough oven cleaning experience.
The vortex shaker swiftly mixes liquids in test tubes or small containers by creating a vortex motion.
Compact and versatile, it's essential for laboratories, enabling quick and efficient blending of samples
for various experiments and analyses.
It is an advanced multi-gas analyzer, offering simultaneous detection of diverse
gases with high accuracy. Utilizing cutting-edge sensor technology, it ensures
real-time monitoring for industrial safety and environmental compliance. Compact
and user-friendly, it is an indispensable tool for comprehensive gas analysis.
It is a state-of-the-art multi-gas analyzer, providing simultaneous detection of diverse gases with precision.
Equipped with advanced sensor technology, it ensures real-time monitoring for enhanced industrial safety and
environmental compliance. Compact and user-friendly, it is an essential tool for comprehensive gas analysis.
The is an advanced multi-gas analyzer, offering simultaneous detection of diverse gases.
With cutting-edge sensor technology, it ensures real-time, accurate monitoring in various
applications. Compact and user-friendly, is an indispensable tool for industrial safety
and environmental compliance.
The multi-gas analyzer is a state-of-the-art device for simultaneous detection of various gases.
With advanced sensor technology, it ensures real-time and accurate monitoring of gas concentrations.
Compact and user-friendly, it's an essential tool for industrial safety and environmental compliance.
The milk analyzer is a cutting-edge device for rapid and accurate assessment
of milk quality. It measures key parameters such as fat, protein, lactose,
and solids, ensuring precise dairy product composition. It is compact and
user-friendly, and it revolutionizes quality control in dairy production.
The fixed infrared gas analyzer offers precise and continuous monitoring
of gas concentrations. Utilizing advanced infrared technology, it ensures
accurate detection, making it ideal for industrial and environmental
applications where reliable gas analysis is critical.
"Introducing the pinnacle of carbon monoxide detection.
With unparalleled precision and advanced sensors, it
swiftly alerts to hazardous levels, triggering a loud
alarm. A sleek, user-friendly design ensures effortless
installation. Your vigilant guardian against invisible
threats."
Inverted biological microscope is Capture detailed images and observe specimens with exceptional clarity and precision. Perfect for research, education, and professional use.
It allows you to ferment and brew your beer with ease. its dual vessel design, you can seamlessly transfer your wort and control the temperature for optimal brewing conditions.
Our range of advanced multi-gas analyzers for precise & reliable gas analysis. we are offer exact measurements of multiple gases, providing essential data for various industries.
- Video recording of this lecture in English language: https://youtu.be/kqbnxVAZs-0
- Video recording of this lecture in Arabic language: https://youtu.be/SINlygW1Mpc
- Link to download the book free: https://nephrotube.blogspot.com/p/nephrotube-nephrology-books.html
- Link to NephroTube website: www.NephroTube.com
- Link to NephroTube social media accounts: https://nephrotube.blogspot.com/p/join-nephrotube-on-social-media.html
Osteoporosis - Definition , Evaluation and Management .pdfJim Jacob Roy
Osteoporosis is an increasing cause of morbidity among the elderly.
In this document , a brief outline of osteoporosis is given , including the risk factors of osteoporosis fractures , the indications for testing bone mineral density and the management of osteoporosis
Basavarajeeyam is a Sreshta Sangraha grantha (Compiled book ), written by Neelkanta kotturu Basavaraja Virachita. It contains 25 Prakaranas, First 24 Chapters related to Rogas& 25th to Rasadravyas.
Recomendações da OMS sobre cuidados maternos e neonatais para uma experiência pós-natal positiva.
Em consonância com os ODS – Objetivos do Desenvolvimento Sustentável e a Estratégia Global para a Saúde das Mulheres, Crianças e Adolescentes, e aplicando uma abordagem baseada nos direitos humanos, os esforços de cuidados pós-natais devem expandir-se para além da cobertura e da simples sobrevivência, de modo a incluir cuidados de qualidade.
Estas diretrizes visam melhorar a qualidade dos cuidados pós-natais essenciais e de rotina prestados às mulheres e aos recém-nascidos, com o objetivo final de melhorar a saúde e o bem-estar materno e neonatal.
Uma “experiência pós-natal positiva” é um resultado importante para todas as mulheres que dão à luz e para os seus recém-nascidos, estabelecendo as bases para a melhoria da saúde e do bem-estar a curto e longo prazo. Uma experiência pós-natal positiva é definida como aquela em que as mulheres, pessoas que gestam, os recém-nascidos, os casais, os pais, os cuidadores e as famílias recebem informação consistente, garantia e apoio de profissionais de saúde motivados; e onde um sistema de saúde flexível e com recursos reconheça as necessidades das mulheres e dos bebês e respeite o seu contexto cultural.
Estas diretrizes consolidadas apresentam algumas recomendações novas e já bem fundamentadas sobre cuidados pós-natais de rotina para mulheres e neonatos que recebem cuidados no pós-parto em unidades de saúde ou na comunidade, independentemente dos recursos disponíveis.
É fornecido um conjunto abrangente de recomendações para cuidados durante o período puerperal, com ênfase nos cuidados essenciais que todas as mulheres e recém-nascidos devem receber, e com a devida atenção à qualidade dos cuidados; isto é, a entrega e a experiência do cuidado recebido. Estas diretrizes atualizam e ampliam as recomendações da OMS de 2014 sobre cuidados pós-natais da mãe e do recém-nascido e complementam as atuais diretrizes da OMS sobre a gestão de complicações pós-natais.
O estabelecimento da amamentação e o manejo das principais intercorrências é contemplada.
Recomendamos muito.
Vamos discutir essas recomendações no nosso curso de pós-graduação em Aleitamento no Instituto Ciclos.
Esta publicação só está disponível em inglês até o momento.
Prof. Marcus Renato de Carvalho
www.agostodourado.com
NVBDCP.pptx Nation vector borne disease control programSapna Thakur
NVBDCP was launched in 2003-2004 . Vector-Borne Disease: Disease that results from an infection transmitted to humans and other animals by blood-feeding arthropods, such as mosquitoes, ticks, and fleas. Examples of vector-borne diseases include Dengue fever, West Nile Virus, Lyme disease, and malaria.
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptxHolistified Wellness
We’re talking about Vedic Meditation, a form of meditation that has been around for at least 5,000 years. Back then, the people who lived in the Indus Valley, now known as India and Pakistan, practised meditation as a fundamental part of daily life. This knowledge that has given us yoga and Ayurveda, was known as Veda, hence the name Vedic. And though there are some written records, the practice has been passed down verbally from generation to generation.
2. Overview
Inspissator LB-10IST is a microprocessor controlled unit. PID auto-tuning
controller installed at the side of the chamber, controls temperature,
speed and flow. Over temperature protection circuit prevents overheating
and protects specimen. Safety tempered glass inner door prevents heat
loss and provide clear specimen visualization. Safety devices include ELB
( elastic load balancing ), self-diagnosis functions such as memory error,
overheating, SSR and sensor short circuit for end user safety.
Specifications :
Capacity 169 L
Shelves 5
Temperature range 95 °C (maximum)
Temperature accuracy ± 0.5 °C at 90 °C
Thermocouple Pt 100 Ω
Heater power 2000 W
Power ( 1 phase ) AC 230 V 50 Hz / 60 Hz
Chamber dimensions ( W × D × H ) 400 × 500 × 750 mm
Exterior dimensions ( W × D × H ) 800 × 720 × 1750 mm
Net weight 136 kgs
Features :
Adjustable shelves (five angles configuration)
Digital display for parameters viewing and control
Sheath metal cover (heater)
3. Stainless steel shelves (interior material)
Steel plate with powder coated finish (exterior material)
Applications :
Used for laboratory applications like in the preparation of TB culture
medium, microbiological sterilization, disinfection, etc.
Labotronics Ltd. Union House, 111 New Union Street, Coventry CV1 2NT,
UK
|
info@labotronics.com www.labotronics.com