INNOVO is a motivated engineering and construction firm devoted to high technology equipments for marine business, both oil and gas and military scenarios.

1. Description
The INNODRIVE 550 and 600
configuration is one of the
largest capacity and
operationally proven powered
reel system available to the
Offshore Oil & Gas and
Renewable Industry.
Used for single or multiple
installations of flexible
flowlines, umbilicals, mooring
wires and power cables
ensuring a safe, fast and
economical installation.
The INNODRIVE system is
capable of handling product
installation operations with or
without laying tensioner and
from a multitude of offshore
dynamically positioned or
anchored vessel in shallow and
ultra deep water depths.
Capabilities
• INNODRIVE 550; 550Te
capacity and reel size up to
12mtr O.D.
• INNODRIVE 600; 600Te
capacity and reel size up to
14mtr O.D.
• Product Ø capacity 20mm
to 300mm.
• Offshore product
installation up to sea state 4
• Customised lay
INNODRIVE – Powered Reel Drive System configuration to customers’
requirements
• DNV, LR and RINA certified
• Containerised shipping and
fast assembly
www.innovoteam.com
info@innovoteam.com ITALY – SLOVENIJA – UK - UAE

2. INNODRIVE – Powered Reel Drive System Revision 1
SYSTEM DETAILS:
INNODRIVE can be easily client customised with any required auxiliary equipment to suit, such as: Lay Tensioner, Level winder,
Control Room, Load Cell System. The flexible design characteristics of INNODRIVE system allow the units to operate from a
variety of vessel types and sizes so improving operational flexibility and multiple-reel installation capability all in a safe, fast and
economical manner.
INNODRIVE is operated by an automatic system and it is DNV, LR and RINA certified. Both the systems can be used for either
product laying or retrieval and is operated from its control system monitored constantly by a programmable logic controller (PLC)
that guarantees reliability and excellent system performance. There are two operating modes: Master or Slave. When operating
in “Master” mode the system manages the product pulling load by a closed loop utilising a load cell. When operated in “Slave”
mode the system feeds a laying tensioner ensuring the product remains ‘slack’ between the reel and the tensioner.
INNODRIVE is a robust design manufactured from S355 grade carbon steel with sufficient structural resistance to operate to -
20°C. Designed to distribute evenly the weight and loads onto the vessel deck.
The whole INNODRIVE system was designed to be easily transportable by sea or road in standard open-topped containers to
anywhere in the world and even the highest drive towers, which are 9.0 m high, can be assembled or dismantled in one working
day. This key feature avoids the need of having to bring a vessel to collect the systems and reduce significantly any mobilization
or demobilization time.
DIMENSIONS AND WEIGHT:
DESCRIPTION INNODRIVE-550 INNODRIVE-600
Product capacity 550 mT 600 mT
Max reel diameter 12 m OD 14 m OD
Weight 90 mT 100 mT
Length 4.5m 4.8m
Breadth 4.0m 4.2m
Height 8.5m 9.0m
Product diameter 20mm - 300mm 20mm - 300mm
Max pull on hub 140mT 160mT
Max operational sea state Sea state 4 Sea state 4
Max transit sea state (with appropriate
Sea state 7 Sea state 8
seafastening)
Laying speed Up to 1600 m/h Up to 1800 m/h
Speed control Full variable control Full variable control
NOTE: Both are able to operate to -20°C
INNOVO Specifications and weights provided are for guidance only.

3. Description
INNOREEL has 500mT product
loading and it is designed to be
loaded with variety of products
ranging from subsea umbilicals,
flexible pipes, mooring wires
and power cables. These can
then be installed from
INNOREEL itself utilising the
INNOVO’s Powered Drive
Systems from various
installation vessels or barges.
INNOREEL can be designed in
different dimensions and
weights in order to suit client
requirements, up to maximum
original design parameters.
INNOREEL is supplied with its
own dedicated saddle suitable
for any short to long term
product storage requirement
prior to deployment
operations.
INNOREEL – 500mT Reel
Capabilities
• Product Ø capacity 20mm
to 300mm
• Product loading capacity up
to 500mT
• Reel OD range up to 14mtr
• Auxiliary Equipment o
Lifting spreader bar o
Saddle
www.innovoteam.com
info@innovoteam.com ITALY – SLOVENIJA – UK - UAE

4. INNOREEL – 500mT Reel Revision 1
SYSTEM DETAILS:
INNOREEL has a product capacity of up to 500mT and for mobilization/demobilization the Reel’s dedicated Lifting Spreader
Bar is supplied to lift the complete system with product up to product and unit weight of 550mT. The reel assembly consists of
an inner hub unit that interfaces to the power drive unit for the deployment of the power cable reel. This manufacture is able
to operate to -20°C.
Adaptability, INNOREEL is perfectly suitable for any short or long term product storage requirement prior to installation
operations, which can be later performed directly from this reel itself once it is mounted to one of INNOVO’s Powered Drive
Systems.
Certification and testing shall be in accordance to DNV, LR and RINA certification. Along with INNOREEL, an operating system
with a full turnkey package can be provided to include pipe handling equipment: tensioners, straighteners, clamps, aligners,
rollers and monitoring equipment.
DIMENSIONS AND WEIGHT:
DESCRIPTION INNOREEL
Product Capacity 500 Te
Max reel diameter 14mtr
Internal drum diameter 9mtr
Reel's width 7.5mtr
Weight (empty) 74Te
Hub interface Compatible with worldwide standard systems
INNOVO Specifications and weights provided are for guidance only.

5. Description
INNOVO’s Modular Jack-Up is a
reliable alternative for
operations in a diverse range of
application ranging from
dredging operations, pier
building activities, ultra heavy-
duty fendering, among others.
It consists of an assembly of the
modular components known as
INNOFLOAT (floating units) and
INNOLIFT (lifting modules),
both certified by RINA’s marine
classification (other
certification are available on
demand).
This modular approach allows
full customization for different
Jack-up sizes and pontoon
shapes to suit specific Client
requirements and operations.
Capabilities
• Operating depth 1mtr to
30mtr water depth
• Lifting capability
configurations:
- 1000mT overall lifting
INNOVO’s Modular JACK-UP - 2000mT overall lifting
• Jack-up ‘feet’ to suit seabed
terrain
www.innovoteam.com
info@innovoteam.com ITALY – SLOVENIJA – UK - UAE

6. INNOVO’s Modular JACK-UP Revision 1
SYSTEM DETAILS:
INNOFLOAT is a boxed shaped floating element specifically designed to be assembled, once place on water, into larger systems of
variable shapes and dimensions. Each INNOFLOAT is designed to be easily transportable to site, handled by low tonnage crane
and assembled without any delay.
INNOLFIT provides the lifting system for INNOVO’s Modular Jack-up, this is comprised by 4 off lifting modules (legs), where each
leg would have the lifting capacity of either 500mt/each or 250mt/each depending on the required configuration.
Special Jack-up’s feet can be installed to suit a variety of seabed terrains (rocky, sandy, etc). A back-up system is also available to
enable a foot to get disconnected from the Jack-up leg if leg movement becomes restricted by existing soil conditions.
A patented manual/semi-automatic/automatic scenario based on input signal data that is constantly monitored by a
programmable logic controller (PLC), guarantees reliability and significant lifting speeds.
The modular Jack-up can be self propelled by adequate outboard motors or it can be tug assisted. Both Jack-up’s modular
components INNOFLOAT and INNOLIFT are certified by the Royal Institution of Naval Architects (RINA) and all other certifications
are available on demand.
DIMENSIONS AND WEIGHT:
DESCRIPTION 500mt Pay Load Jack-up 250mt Pay Load Jack-up
Length overall (LDA) 30m 37m
Breadth 17m 28m
Height 2.89m 2.89m
Leg extensions 36m 48m
Leg diameter 1.95m 1.2m
Payload 500mt 250mt
INNOVO Specifications and weights provided are for guidance only.

7. Description
INNOVO’S Modular pontoon
INNOVO’s modular pontoons
are box shaped floating
elements which are specifically
designed to be assembled,
once placed in water, into
larger units of extremely
variable shape and dimension.
Modular components are
known as INNOFLOAT (floating
units) and INNOLIFT (lifting
modules), both certified by
RINA’s marine classification
(other certifications are
available on demand).
INNOVO’S Ultra Heavy Fenders
INNOVO’S ultra heavy duty
fenders are modular pontoon
designed and built to face hash
water and severe stormy
conditions: design and
manufacturing are fully
certified by RINA.
Capabilities
INNOVO’S modular pontoon
are:
• Heavy duty;
INNOVO’s Modular PONTOON • Resistant;
• Verified to work in a jack-up
configuration
• Suitable to create barge
configurations of
extremely variable shape
and dimensions according
to the scope of works.
www.innovoteam.com
info@innovoteam.com ITALY – SLOVENIJA – UK - UAE

8. INNOVO’S Modular PONTOON Revision 1
SYSTEM DETAILS:
• Single elements are easily transportable so they can be transferred on site by trucks, placed in water and then assembled.
• The pontoon can be self propelled by relevant outboard motors or can be moved using winches.
• In INNOVO’s modular pontoon there are only continuous full penetration welds
• Pontoons have a flat bottom and minimal draft, which makes them suitable for working in very shallow waters (under one
metre depth).
• The modular pontoon are design and build according the most demanding requirement of International Association
Classification Society.
• A patented manual/semi-automatic/automatic scenario based on input signal data that is constantly monitored by a
programmable logic controller (PLC), guarantees reliability and significant lifting speeds.
DIMENSIONS AND WEIGHT:
INNOFLOAT module
RINA class: C @ HULL
(BV, DNV, GL, LR, ABS, RUSSIAN REGISTER class on demand)
Link for 1,5 and 2 m height module
L [m] B [m] T [m] W [t] Deck Capacity [t/mq]
3/18 3 3 2 3,7 6
6/36 6 3 2 7,2 6
9/54 9 3 2 10,5 6
12/72 12 3 2 13,5 6
INNOLIFT module
RINA certificated
(BV, DNV, GL, LR, ABS, RUSSIAN REGISTER certificated on demand)
Link for 1,5 and 2 m height module
INNOLIFT L [m] B [m] T [m] W [t] Lifting Force [t] Spud [in] Spud L/W [m/t]
34-50 3 3 2 14,5 50 34” 6 / 3,2
34-65 3 3 2 15,0 65 34” 6 / 3,2
34-75 3 3 2 20,5 75 34” 6 / 3,2
34-100 3 3 2 20,5 100 34” 6 / 3,2
INNOVO Specifications and weights provided are for guidance only.

9. T20 HIGH-CUBE Description
INNOVO’s High Cube are box
shaped floating elements which
are specifically designed to be
assembled, into larger units of
extremely variable shape and
dimension.
Modular components are
certified by RINA’s marine
classification (other
certifications are available on
demand).
Features
INNOVO’S modular High-Cube
are:
• Heavy duty;
• Resistant;
• Characterized by
continuous full penetration
welds.
INNOVO’s HIGH-CUBE
www.innovoteam.com
info@innovoteam.com ITALY – SLOVENIJA – UK - UAE

10. INNOVO’S High-Cube Revision 1
SYSTEM DETAILS:
• Single elements are easily transportable so they can be transferred on site by trucks.
• The modules can be moved using slings correctly fixed on the high-cube top.
• Each high-cube can be assembled with the all the other high-cube modules typologies by suitable connections.
• The high-cube are design and build according the most demanding requirement of International Association
Classification Society.
DIMENSIONS AND WEIGHT:
HIGH-CUBE MODULES
RINA class: C @ HULL
(BV, DNV, GL, LR, ABS, RUSSIAN REGISTER class on demand)
T
L Link for 1,5 and 2 m height module
B L [m] B [m] T [m] W [t] Deck Capacity [t/mq]
T20HC (iso container, 20 feet high cube) 6,06 2,44 2,89 9,8 8
T40HC (iso container, 40 feet high cube) 12,19 2,44 2,89 16,3 8
LIFTING POINT
HIGH-CUBE
INTERNAL FRAME
HIGH-CUBE
CONNECTION
SYSTEM
INNOVO Specifications and weights provided are for guidance only.

11. Description
The INNOTABLE 2000 is a
2000Te capacity umbilical and
cable carousel system for the
purpose of installing umbilicals,
subsea power cables and
telecoms cables in the Offshore
Oil & Gas, Telecoms and
Renewable Industry ensuring a
safe, fast and economical
installation.
The INNOTABLE system is
capable of handling product
installation operations from a
multitude of vessels including
dynamically positioned or
anchored units in harsh
environments and both shallow
and ultra deep water depths.
The system is a high volume
and high capacity to suit larger
cable diameters, long lengths
and high weights.
Capabilities
• INNOTABLE 2000; 2000Te
capacity and max 15mtr
O.D
• Product Ø capacity 20mm
to 300mm.
• Offshore product
INNOTABLE 2000 – Powered Carousel System installation up to sea state 4
• Customised lay
configuration to customers’
requirements
• DNV, LR and RINA certified
www.innovoteam.com
info@innovoteam.com ITALY – SLOVENIJA – UK - UAE

12. INNOTABLE 2000 – Turntable (Carousel) Unit Revision 1
SYSTEM DETAILS:
The INNOTABLE 2000 can be divided into an inner and outer partition in which two cables can be loaded independently if
required.
Rotating Table, robust design manufactured from S344 grade carbon steel with sufficient structural resistance to operate to -
20°C. Cable outer holding is ensured by modular fences, designed for easy handling and to facilitate mounting/dismounting
operations. Cable inner holding is manufactured from adequately re-enforced bent plate with the option of the last portion being
conical to suit Client requirements. The table bottom is covered by robust wooden segments to ensure an optimum flat surface
for cable positioning.
Motorized Drive Units, composed by two electrical motors complete with heater and anti-corrosion system mounted on the
Turntable foundation for rapid mobilization/demobilization. The Emergency Breaking System is designed to be installed either to
break between Electrical Motor and Gearboxes, or directly on Rotating Table bottom.
Foundation, robust design manufactured from S355 grade carbon steel with sufficient structural resistance to operate to -20°C.
Designed to distribute evenly the weight and loads of the Turntable onto the vessel deck. Foundation beams designed to be sea-
fastened to the vessel deck by robust dedicated brackets. Foundation saddles are designed to allow the Motorized Drive Units to
be adjusted as well as easily accessible and controllable.
The INNOTABLE 2000 can be supplied complete with INNOVO cable/umbilical management system composed by multi-floor
tower to install either electrical/control and/or hydraulic powerpacs, pick-up arm hydraulically drive, tensioner for cable
loading/unloading and rollers/bent for cable guiding during its movement from/to turntable.
DIMENSIONS AND WEIGHT:
Maximum Load Capacity 2000 Metric Tons
Design Accelerations Sea State 4:
Transverse 8m/sec²
Vertical: Gravity ±2.52 Max 12.33 m/sec²
Extreme Diameter of Turntable 15.25m
Outer Diameter of “Basket” (available for cable storage) 15m
Inner Diameter of “Basket” (available for cable storage) 5m
Foundation Envelope Diameter 14.4m
Overall Turntable height (foundation & basket)* 6.49m
Volume of “Basket”(available for cable storage) 645m³
Weight of Rotating Part (Slew Bearing, Wooden Floor,
105 Metric Tons
Plated Inner Core & Access Ladder)
Weight of Foundation (Including Drive Units) 55 Metric Tons
C.O.G above deck (Including 30mm Plate) 1.8m
Carousel Speed Step-less 0 to 1.0 RPM
Acceleration (Fully Loaded) 0 to 1.0 RPM in 15 seconds
Retardation (Fully Loaded) 1.0 to 0 RPM in 15 seconds
Emergency Stop (Fully Loaded) 1.0 to 0 RPM in 8 seconds
Frequency Controlled Pinion Drives 2 off @ 38KW
Power Supply 3ph, 440Vac, 60Hz
INNOVO Specifications and weights provided are for guidance only.

13. Modular TURNTABLE System – GA 2000mT turntable
Description BASKET
GA 2000mT turntable
main features:
• Extreme diameter of
The modular Turntable carousel = 18.25m;
system is an equipment • Outer diameter of
assembly constituted by the “Basket” = 18.00m;
followings: • Inner diameter of
WOODEN “Basket” (core diameter)
• GA 2000mT turntable; CORE = 10.00m;
FLOOR
• Loading arm assembly; • Height of “Basket” above
• Hinge; carousel floor = 5.785m
• Tower; • Total weight of carousel
= 165mT;
• Tensioner (5 mT);
• Max load capacity =
• Bottom frame assembly; 2000mT;
• Tensioner (10 mT); • Power supply: 3ph, 440V,
• Chute Assy; 60Hz
GA 2000mT Turntable
www.innovoteam.com
info@innovoteam.com ITALY – SLOVENIJA – UK - UAE

14. Modular TURNTABLE System – GA 2000mT turntable Revision 1
Chute Assy
Bottom Frame
Assembly
Tower assembly System details
TENSIONER
The modular turntable system
with carrying capacity up to
2,000 tonnes, loading arm
assembly, tensioners,
trackways and associated
equipment, shall be used for
CONTROL CABIN HINGE performing cable laying
10’ CONTAINER operations.
The assembly system shall be
positioned on vessels/barges
LOADING according to operations
requirements and in
ARM compliance with vessel
features and dimension.
STAIR 4-OFF The assembly system
ASSEMBLY 20’ CONTAINER modularity offers the possibility
to adapt the system
configuration to Client
requirements and scope of
work.
INNOVO Specifications and weights provided are for guidance only.

15. INNOVO’s Modular TOWER System
Description
The modular tower
system is an
equipment assembly
constituted by the
followings:
• Loading arm
assembly;
• Hinge;
• Tower modules
(container);
• Control cabin (10’
Container);
• 10T Tensioner;
• Top grillage;
FRONT VIEW SIDE VIEW
www.innovoteam.com
info@innovoteam.com ITALY – SLOVENIJA – UK - UAE

16. INNOVO’S MODULAR TOWER SYSTEM Revision 1
SISTEM DETAILS
The loading tower assembly system is constituted by 2 main elements:
1. 6-off INNOVO 20’ modular box
INNOVO MODULAR BOX L [m] B [m] T [m] W [t] Deck Capacity [t/mq]
20' 6.06 2.44 2.89 9.8 8
2. Modular loading arm characterized by: MODULAR TRUSSED SECTION
• Modular trussed sections connected each-other by flanged
couplings: each section is composed by 6” and 4” pipe sizes.
• Inside the arm are equally disposed some adjustable rollers
equipped by self-lubricating bearings, to guide the various cables
size.
• The arm modularity ensures the system adaptability to different
diameter turntables. ROLLERS
• Inner rollers positioning gives to system an high flexibility in term of
cable/umbilical sizes.
INNOVO Specifications and weights provided are for guidance only.