This document provides an overview of various ifm products, including:
- 3D smart sensors that can assist with mobile machines.
- Industrial imaging camera systems for mobile machines.
- Position, inductive, photoelectric, and other types of sensors for applications like factory automation, welding, and mobile machines.
- Flow sensors, level sensors, pressure sensors, temperature sensors and other process sensors.
- Identification systems, connection technology, power supplies, and condition monitoring systems.
MHC-3000 Wall mount ultrasonic flow meter data sheetKevin Yang
The document describes a wall mount ultrasonic flow meter. It can measure water and other liquid flows across a wide range of pipe sizes and temperatures. It has options for hazardous area certification, integrated temperature sensors, and a heat measurement function to calculate energy or heat flow. It connects to automation systems and has configurable inputs, outputs, and communication protocols.
The document provides technical specifications for the Cerabar T PMP135 hygienic pressure transmitter. It is designed to measure absolute and gauge pressures in hygienic applications in the food and pharmaceutical industries. Key specifications include an output of 4-20 mA, accuracy of less than 0.5%, a temperature range of -25 to 100°C, and pressure measurement ranges from 1 bar to 40 bar. It has wetted parts made of 316L stainless steel with a surface roughness of Ra ≤ 0.8 μm. Accessories like displays and process fittings are also described along with pricing information.
This document provides specifications for various environmental sensors that are compatible with NTI's ENVIROMUX systems for monitoring temperature, humidity, and other environmental conditions remotely. It describes sensors for measuring temperature alone or in combination with humidity in various applications and ranges. It also includes precision sensors for industrial use as well as transmitters for converting sensor outputs to signals compatible with ENVIROMUX systems.
The document provides product information for the Proline Promag 10D electromagnetic flowmeter for measuring conductive liquids like water. Key specifications of the Promag 10D include measurement ranges up to 10 m/s, minimum conductivity of 50 μS/cm, operating temperature up to 60°C, accuracy of ±0.5% of reading, and pressure rating up to 16 bar. The document also provides dimensional drawings, electrical connection diagrams, and price tables for ordering the Promag 10D and additional measurement products.
The HSM-20G humidity sensor module converts relative humidity to a standard voltage output between 1.0-3.0V. It is suitable for applications like humidifiers, dehumidifiers, air conditioners, and automotive climate control. The module has an operating humidity range of 20-95% RH with an accuracy of ±5% RH, and can operate between 0-50°C. It undergoes tests like impact, vibration, temperature cycling and humidity exposure to ensure reliability.
The document provides technical specifications for the Liquiphant T FTL20 point level switch for liquids, including its dimensions, electrical connections, operating conditions, approvals, and price table. It can detect liquid levels through changes in vibration frequency and connects to PLCs, relays, or an AS-i bus. Accessories like weld-in adapters, cables, and pressure switches are also available.
Electronic and Electromechanical Switches for Vacuum, Pressure, Differential Pressure, and Temperature; Specialty Transmitters for Functional Safety, Process Monitoring and Control; Industrial Temperature Sensors
MHC-3000 Wall mount ultrasonic flow meter data sheetKevin Yang
The document describes a wall mount ultrasonic flow meter. It can measure water and other liquid flows across a wide range of pipe sizes and temperatures. It has options for hazardous area certification, integrated temperature sensors, and a heat measurement function to calculate energy or heat flow. It connects to automation systems and has configurable inputs, outputs, and communication protocols.
The document provides technical specifications for the Cerabar T PMP135 hygienic pressure transmitter. It is designed to measure absolute and gauge pressures in hygienic applications in the food and pharmaceutical industries. Key specifications include an output of 4-20 mA, accuracy of less than 0.5%, a temperature range of -25 to 100°C, and pressure measurement ranges from 1 bar to 40 bar. It has wetted parts made of 316L stainless steel with a surface roughness of Ra ≤ 0.8 μm. Accessories like displays and process fittings are also described along with pricing information.
This document provides specifications for various environmental sensors that are compatible with NTI's ENVIROMUX systems for monitoring temperature, humidity, and other environmental conditions remotely. It describes sensors for measuring temperature alone or in combination with humidity in various applications and ranges. It also includes precision sensors for industrial use as well as transmitters for converting sensor outputs to signals compatible with ENVIROMUX systems.
The document provides product information for the Proline Promag 10D electromagnetic flowmeter for measuring conductive liquids like water. Key specifications of the Promag 10D include measurement ranges up to 10 m/s, minimum conductivity of 50 μS/cm, operating temperature up to 60°C, accuracy of ±0.5% of reading, and pressure rating up to 16 bar. The document also provides dimensional drawings, electrical connection diagrams, and price tables for ordering the Promag 10D and additional measurement products.
The HSM-20G humidity sensor module converts relative humidity to a standard voltage output between 1.0-3.0V. It is suitable for applications like humidifiers, dehumidifiers, air conditioners, and automotive climate control. The module has an operating humidity range of 20-95% RH with an accuracy of ±5% RH, and can operate between 0-50°C. It undergoes tests like impact, vibration, temperature cycling and humidity exposure to ensure reliability.
The document provides technical specifications for the Liquiphant T FTL20 point level switch for liquids, including its dimensions, electrical connections, operating conditions, approvals, and price table. It can detect liquid levels through changes in vibration frequency and connects to PLCs, relays, or an AS-i bus. Accessories like weld-in adapters, cables, and pressure switches are also available.
Electronic and Electromechanical Switches for Vacuum, Pressure, Differential Pressure, and Temperature; Specialty Transmitters for Functional Safety, Process Monitoring and Control; Industrial Temperature Sensors
The document provides technical specifications for the Liquicap T FMI21, a two-rod capacitive probe for continuous level measurement in liquids. It can measure levels in tanks of various materials from 6 to 98 inches in length and operates independently of tank geometry. The probe measures the capacitance between its two rods to determine the liquid level and transmits a 4-20 mA signal corresponding to the percentage of probe submerged.
The RIA45 panel meter is a digital device that monitors and displays analog measurement values from process instrumentation. It has a 5-digit LCD display, universal inputs that support current, voltage, resistance, and thermocouple signals. It performs calculations on the measured values and has one or two analog outputs. The device is configurable via software and has relay outputs to monitor process variables.
This document provides information on the Liquiphant T FTL20H point level switch for liquids, including:
1) It is suitable for hygienic applications in vessels or pipes and can detect liquid levels regardless of electrical properties, bubbles, or turbulence.
2) It works by detecting changes in the fork's vibrating frequency when covered or uncovered by liquid and can connect to PLCs, relays, or AS-i bus systems.
3) It has an IP69K-rated housing, operating temperature range of -40 to 150°C, and can be mounted vertically or horizontally depending on the application.
Demo request dan pemesanan produk, hubungi PT Siwali Swantika. Jakarta : 021-45850618, WA chat only 0811-1519-949 | Surabaya : 031-8421264, WA chat only 0811-1519-948. Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
The right choice for your application. Flow sensors and flow meters from ifm ...ifm electronic gmbh
The document provides information about flow sensors and flow meters from ifm. It includes:
- An overview of ifm's product portfolio including magnetic-inductive, vortex, mechatronic, ultrasonic, and thermal flow meters and sensors.
- Specifications for different flow meter models including measuring ranges, medium temperatures, pressures, and materials.
- Descriptions of features like integrated temperature measurement, totalizer functions, output options, and suitable applications for various industrial media.
- Information on accessories and technical support available from ifm.
The patented Flow Technology DC-I Series positive displacement flow meters (PD Meter) are ideal for a wide variety of liquid flow applications. These applications include, but are not limited to, paints, resins, petrochemicals, lubricants, fuels, polyurethanes and adhesives. These flow meters are both highly accurate and easily adaptable to most industrial applications.
This document summarizes the specifications of a waterproof bench scale. It has an IP65 rating making it suitable for damp environments. Key features include a backlit LCD display, stainless steel construction, optional data interfaces, adjustable leveling feet, and a maximum capacity of 150kg. It has over 15,000 divisions of resolution and meets various industry standards for emissions, immunity, electrical safety, and legal for trade applications.
This document provides specifications for the TESCOM 44-5800 Series pressure reducing regulators. The regulators offer superior heat transfer technology and tolerance to voltage spikes and high temperatures, making them suitable for worldwide applications. Key specifications include maximum inlet/outlet pressures of 6000/500 psig, operating temperatures up to 500°F, voltage requirements of 90-125 or 190-230 VAC, and material options of 316 stainless steel, Monel, or Hastelloy. The document also includes diagrams of the regulator and flow charts illustrating its performance characteristics.
The Model PK200 Current-to-Pneumatic Converter:
- Converts a 4-20mA or 10-50mA input current signal to a proportional pneumatic output signal.
- Has adjustable zero and span settings, high accuracy and reliability, and is minimally affected by environmental conditions.
- Is used to actuate pneumatic devices like valves and cylinders, as well as for signal conversion in hybrid instrumentation systems.
The document provides product information for the Cerabar T PMC131 pressure transmitter, including an overview of its applications in measuring absolute and gauge pressures, its key technical specifications such as an accuracy of less than 0.5%, and price tables listing order numbers and prices for different models and accessories like a display unit. It also includes diagrams of the transmitter dimensions and electrical connections.
United Electric 2018 Short Form Product CatalogIves Equipment
United Electric Controls is a premier manufacturer of safety, alarm, and shutdown equipment, and is a a global supplier of pressure and temperature switches, transmitters, sensors, and controls for the process, discrete, semiconductor, aerospace, and defense industries.
Process Control Instruments India - Canopus Instrumentssmita_kale
Canopus Instruments manufactures top quality instrumentation and process control products. Buy the best industry products at Canopus Instruments now. https://www.canopusinstruments.com/product/industrial-automation-product/process-controller-indicators/digital-process-indicator/
The document describes NIVOTRACK magnetostrictive level transmitters. Key details include:
- They provide high accuracy level measurement for clean fluids down to 0.1mm resolution.
- Models are available with rigid or flexible probes up to 15m long, allowing measurement in high tanks. Plastic coated versions expand compatibility to aggressive chemicals.
- Transmitters integrate into control systems easily with intelligent processing, communication software, and accessories. They output 4-20mA and HART signals.
- An operating principle is described involving a float, magnetostrictive wire, and time-of-flight acoustic pulse measurement to determine liquid level.
This document provides information about the Tinius Olsen H75kS Materials Testing Machine. It can test a wide variety of materials in tension, compression, flexure or shear. It has an easy to use backlit LCD display and console. Test results can be sent directly to a printer or computer. It has accuracy of +/-0.5% load measurement and +/-0.01% position measurement. It also describes the specifications, features, and applications of the machine.
The document provides technical specifications for the Liquiphant T FTL260 compact universal limit switch for liquids, including its maintenance-free stainless steel construction, operating conditions of -40 to 300°F and -14.5 to 580 psi, and electrical output options of AC or DC versions for connecting to devices like PLCs or solenoid valves. It also includes dimensional drawings, application examples, price tables for quantity orders, and contact information for the manufacturer.
This document provides specifications for several digital multimeters and clamp meters. It includes:
- Details on 4 digital multimeters (models ARW 992L, ARW 9911, ARW 9912, ARW 9908) that measure voltage, current, resistance and more with accuracies between 0.5-1.5% and display counts from 2000-4000 points.
- 3 clamp meters (models ARW 3341, ARW 3343, ARW 331) that measure AC and DC current and voltage with accuracies between 1.0-3.0% and display counts from 2000-4000 points. One model measures up to 1000A.
- A clamp meter (ARW 3347
The document describes ifm's product catalog for 2015/2016, including innovations in various sensor technologies. It provides details on 3D smart sensors, industrial imaging sensors, photoelectric sensors, position sensors, magnetic sensors, laser sensors, encoders, flow sensors, level sensors, pressure sensors, temperature sensors, process sensors, identification systems, vibration monitoring systems, connection technology, and software. The catalog highlights new products, technologies, and features across ifm's range of sensors and systems.
The document discusses inductive sensors and their applications. It introduces Kplus sensors which have a uniform sensing range for detecting all metals, making them ideal for applications detecting things like aluminum. It also discusses electromagnetic immune Kplus sensors that are suitable for welding applications as they can prevent incorrect switching due to strong magnetic fields. Robust full-metal sensors are also introduced, providing high reliability even under extreme conditions like temperature changes or aggressive cleaning chemicals. They are well-suited for applications in food processing, machine tools, and other industrial environments.
The document provides technical specifications for the Liquicap T FMI21, a two-rod capacitive probe for continuous level measurement in liquids. It can measure levels in tanks of various materials from 6 to 98 inches in length and operates independently of tank geometry. The probe measures the capacitance between its two rods to determine the liquid level and transmits a 4-20 mA signal corresponding to the percentage of probe submerged.
The RIA45 panel meter is a digital device that monitors and displays analog measurement values from process instrumentation. It has a 5-digit LCD display, universal inputs that support current, voltage, resistance, and thermocouple signals. It performs calculations on the measured values and has one or two analog outputs. The device is configurable via software and has relay outputs to monitor process variables.
This document provides information on the Liquiphant T FTL20H point level switch for liquids, including:
1) It is suitable for hygienic applications in vessels or pipes and can detect liquid levels regardless of electrical properties, bubbles, or turbulence.
2) It works by detecting changes in the fork's vibrating frequency when covered or uncovered by liquid and can connect to PLCs, relays, or AS-i bus systems.
3) It has an IP69K-rated housing, operating temperature range of -40 to 150°C, and can be mounted vertically or horizontally depending on the application.
Demo request dan pemesanan produk, hubungi PT Siwali Swantika. Jakarta : 021-45850618, WA chat only 0811-1519-949 | Surabaya : 031-8421264, WA chat only 0811-1519-948. Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
The right choice for your application. Flow sensors and flow meters from ifm ...ifm electronic gmbh
The document provides information about flow sensors and flow meters from ifm. It includes:
- An overview of ifm's product portfolio including magnetic-inductive, vortex, mechatronic, ultrasonic, and thermal flow meters and sensors.
- Specifications for different flow meter models including measuring ranges, medium temperatures, pressures, and materials.
- Descriptions of features like integrated temperature measurement, totalizer functions, output options, and suitable applications for various industrial media.
- Information on accessories and technical support available from ifm.
The patented Flow Technology DC-I Series positive displacement flow meters (PD Meter) are ideal for a wide variety of liquid flow applications. These applications include, but are not limited to, paints, resins, petrochemicals, lubricants, fuels, polyurethanes and adhesives. These flow meters are both highly accurate and easily adaptable to most industrial applications.
This document summarizes the specifications of a waterproof bench scale. It has an IP65 rating making it suitable for damp environments. Key features include a backlit LCD display, stainless steel construction, optional data interfaces, adjustable leveling feet, and a maximum capacity of 150kg. It has over 15,000 divisions of resolution and meets various industry standards for emissions, immunity, electrical safety, and legal for trade applications.
This document provides specifications for the TESCOM 44-5800 Series pressure reducing regulators. The regulators offer superior heat transfer technology and tolerance to voltage spikes and high temperatures, making them suitable for worldwide applications. Key specifications include maximum inlet/outlet pressures of 6000/500 psig, operating temperatures up to 500°F, voltage requirements of 90-125 or 190-230 VAC, and material options of 316 stainless steel, Monel, or Hastelloy. The document also includes diagrams of the regulator and flow charts illustrating its performance characteristics.
The Model PK200 Current-to-Pneumatic Converter:
- Converts a 4-20mA or 10-50mA input current signal to a proportional pneumatic output signal.
- Has adjustable zero and span settings, high accuracy and reliability, and is minimally affected by environmental conditions.
- Is used to actuate pneumatic devices like valves and cylinders, as well as for signal conversion in hybrid instrumentation systems.
The document provides product information for the Cerabar T PMC131 pressure transmitter, including an overview of its applications in measuring absolute and gauge pressures, its key technical specifications such as an accuracy of less than 0.5%, and price tables listing order numbers and prices for different models and accessories like a display unit. It also includes diagrams of the transmitter dimensions and electrical connections.
United Electric 2018 Short Form Product CatalogIves Equipment
United Electric Controls is a premier manufacturer of safety, alarm, and shutdown equipment, and is a a global supplier of pressure and temperature switches, transmitters, sensors, and controls for the process, discrete, semiconductor, aerospace, and defense industries.
Process Control Instruments India - Canopus Instrumentssmita_kale
Canopus Instruments manufactures top quality instrumentation and process control products. Buy the best industry products at Canopus Instruments now. https://www.canopusinstruments.com/product/industrial-automation-product/process-controller-indicators/digital-process-indicator/
The document describes NIVOTRACK magnetostrictive level transmitters. Key details include:
- They provide high accuracy level measurement for clean fluids down to 0.1mm resolution.
- Models are available with rigid or flexible probes up to 15m long, allowing measurement in high tanks. Plastic coated versions expand compatibility to aggressive chemicals.
- Transmitters integrate into control systems easily with intelligent processing, communication software, and accessories. They output 4-20mA and HART signals.
- An operating principle is described involving a float, magnetostrictive wire, and time-of-flight acoustic pulse measurement to determine liquid level.
This document provides information about the Tinius Olsen H75kS Materials Testing Machine. It can test a wide variety of materials in tension, compression, flexure or shear. It has an easy to use backlit LCD display and console. Test results can be sent directly to a printer or computer. It has accuracy of +/-0.5% load measurement and +/-0.01% position measurement. It also describes the specifications, features, and applications of the machine.
The document provides technical specifications for the Liquiphant T FTL260 compact universal limit switch for liquids, including its maintenance-free stainless steel construction, operating conditions of -40 to 300°F and -14.5 to 580 psi, and electrical output options of AC or DC versions for connecting to devices like PLCs or solenoid valves. It also includes dimensional drawings, application examples, price tables for quantity orders, and contact information for the manufacturer.
This document provides specifications for several digital multimeters and clamp meters. It includes:
- Details on 4 digital multimeters (models ARW 992L, ARW 9911, ARW 9912, ARW 9908) that measure voltage, current, resistance and more with accuracies between 0.5-1.5% and display counts from 2000-4000 points.
- 3 clamp meters (models ARW 3341, ARW 3343, ARW 331) that measure AC and DC current and voltage with accuracies between 1.0-3.0% and display counts from 2000-4000 points. One model measures up to 1000A.
- A clamp meter (ARW 3347
The document describes ifm's product catalog for 2015/2016, including innovations in various sensor technologies. It provides details on 3D smart sensors, industrial imaging sensors, photoelectric sensors, position sensors, magnetic sensors, laser sensors, encoders, flow sensors, level sensors, pressure sensors, temperature sensors, process sensors, identification systems, vibration monitoring systems, connection technology, and software. The catalog highlights new products, technologies, and features across ifm's range of sensors and systems.
The document discusses inductive sensors and their applications. It introduces Kplus sensors which have a uniform sensing range for detecting all metals, making them ideal for applications detecting things like aluminum. It also discusses electromagnetic immune Kplus sensors that are suitable for welding applications as they can prevent incorrect switching due to strong magnetic fields. Robust full-metal sensors are also introduced, providing high reliability even under extreme conditions like temperature changes or aggressive cleaning chemicals. They are well-suited for applications in food processing, machine tools, and other industrial environments.
This document provides an overview of various sensor technologies from ifm electronic including inductive sensors, encoders, position sensors, infrared sensors, capacitive sensors, ultrasonic sensors, laser sensors, pressure sensors, flow sensors, temperature sensors, identification systems, and connection technologies. New products are highlighted such as inductive sensors that take a leap forward with one sensing range for all metals, the next generation of photoelectric sensors with distance display and easy setting, and IO-Link compatible sensors and components.
The document provides information on various level measurement systems from ifm including capacitive, guided wave radar, and hydrostatic sensors for point level, continuous level, and interface measurement with options for switching outputs or analog outputs and approvals for industrial and hygienic applications. Accessories such as rods, coaxial pipes, and process connections are also described.
The document summarizes IFM's position sensors and object recognition products, including inductive sensors, magnetic sensors, photoelectric sensors, flow sensors, temperature sensors, pressure sensors, fluid sensors, level sensors, diagnostic systems, and object recognition systems. It provides information on product innovations, technical specifications, application examples, and order numbers. Accessories such as connection cables, mounting brackets, and damping elements are also listed.
Lika Electronic's general catalog in English 0414 editionLika Electronic
This catalog was designed to introduce Lika Electronic's comprehensive range of encoders and position measuring systems: incremental and absolute, optical and magnetic, rotary and linear encoders, incremental & absolute sensors, linear and rotary incremental & absolute magnetic measurement systems, filedbus encoders, draw wire units, rotary actuators, displays, signal converters and encoder interfaces. Today it is available in a new user-friendly version: it allows an easy-to-use search experience and is rich in external links and internet surfing features to help you easily find all information you need as well as datasheets and technical documentation.
WayCon presents its product range in a new brochure. This provides an insight into the entire sensor portfolio for cable, laser and ultrasonic sensors as well as linear potentiometers, magnetostrictive transducers and capacitive position sensors. All the relevant technical data are explained in detail.
The product range includes inexpensive wire sensors with high reliability and precision accuracy. Equipped with a sturdy anodised aluminium casing, as well as optional Hartcoat® coating with a V4 measuring cable for corrosion protection, we guarantees durability, even under the harshest of conditions. For especially fast and accurate measuring work, WayCon also presents it proven laser sensors. In various versions, these sensors guarantee measurements in the micrometre range at a fast measurement frequency. The dot and line lasers even penetrate transparent discs.
WayCon’s linear potentiometers feature a variety of casing forms and installation options, including for spring stroke measurement, for example. What’s remarkable is the flexible mounting using clamping blocks, ball joints and flange. product information on magnetostrictive transducers and capacitive location sensors is also included in the brochure, along with ultrasonic sensors.
WayCon presents its product range in a new brochure. This provides an insight into the entire sensor portfolio for cable, laser and ultrasonic sensors as well as linear potentiometers, magnetostrictive transducers and capacitive position sensors. All the relevant technical data are explained in detail.
The product range includes inexpensive wire sensors with high reliability and precision accuracy. Equipped with a sturdy anodised aluminium casing, as well as optional Hartcoat® coating with a V4 measuring cable for corrosion protection, we guarantees durability, even under the harshest of conditions. For especially fast and accurate measuring work, WayCon also presents it proven laser sensors. In various versions, these sensors guarantee measurements in the micrometre range at a fast measurement frequency. The dot and line lasers even penetrate transparent discs.
WayCon’s linear potentiometers feature a variety of casing forms and installation options, including for spring stroke measurement, for example. What’s remarkable is the flexible mounting using clamping blocks, ball joints and flange. product information on magnetostrictive transducers and capacitive location sensors is also included in the brochure, along with ultrasonic sensors.
This document provides an overview of Watanabe Electric Industry Co., Ltd., a leading Japanese manufacturer of measuring instruments. The company has a history of over 75 years and 190 employees. It produces both component products like signal converters and digital panel meters, as well as system products. The document lists the company's various product lines and models, locations of its headquarters and factories in Japan, and provides basic information about its Tokyo and Fukushima factories.
This document discusses industrial encoders and tachometers from Nidec Avtron Automation for providing feedback and instrumentation in drive systems and machine control. It provides an overview of encoder selection factors like mounting style and durability ratings. It also summarizes the different encoder technologies available, including optical and magnetic sensing, as well as incremental and absolute encoding. Application examples and product specifications are given for a range of encoder models suited to different industrial environments and hazardous duty applications.
The document discusses inductive position sensors from ifm electronic gmbh that have a consistent sensing range on all metal types, are resistant to electromagnetic noise and welding conditions, and have compact dimensions for use in tight spaces. The sensors come in M12, M18, and M30 housing sizes with sensing ranges of 4-15mm and temperature ranges from -40 to 85 degrees Celsius. They can be used for applications involving factory automation, welding robots, and metalworking machines where strong magnetic fields are present.
WIRMEC offers a wide range of automatic cutting, stripping and crimping machines for the world of wiring and panel builders, as well as transfer and semi-automatic machines (from 0.08 mm2 to 10mm2, seal insertion and pre-insulated terminals).Wirmec srl is a company specialized in harness machines.
Agent EXCLUSIF de WIRMEC au Maroc
www.wirmec.com
Nouamane BADIDI
IB2B Managing Partner
nbadidi@gmail.com
Tel Mobile : +212 611683037
Morocco
This document discusses valve position sensors from ifm. It provides information on:
- Inductive sensors that provide contactless position feedback for quarter-turn actuators and rising stem valves.
- Sensors with AS-i interface that allow monitoring and control of up to 62 actuators over a 2-wire cable.
- A rising stem valve sensor (efector valvis) that provides continuous position feedback for single seat, double seat, and diaphragm valves with 3 switching outputs or analog output.
- Accessories like target pucks and adapters to integrate the sensors with different valve types from manufacturers like APV, SPC, Bardiani, and GEA.
The document discusses ifm's top products for 2014/2015, including 3D smart sensors, camera systems for mobile machines, and various photoelectric, position, temperature, and pressure sensors. It provides details on new product releases and innovations from ifm in areas such as industrial imaging, position sensing, and systems for mobile machines. Product summaries are provided for capacitive sensors, photoelectric sensors, laser sensors, temperature transmitters, and other sensor types.
The document discusses ifm's top products for 2014/2015, including 3D smart sensors, robust camera systems, and various photoelectric, position, temperature, and process sensors. It provides details on innovations, product categories, individual sensor models, specifications, and ordering information. Key products highlighted are a 3D vision sensor, O6 miniature photoelectric sensors, capacitive sensors for transparency, and laser distance measurement sensors.
The document describes ifm's O6 series of photoelectric sensors. It provides details on three product types: diffuse reflection sensors, retroreflective sensors, and through-beam sensors. Key features highlighted include reliable background suppression, precise object detection capabilities, intuitive setting options, and housing with connection via M8 or M12 connectors. A range of accessories is also available to support installation and mounting of the sensors.
This document provides a summary of temperature sensor products from ifm. It describes compact temperature sensors for industrial and hygienic applications, including sensors with integrated evaluation units and separate control/monitor units. A variety of sensor types are presented for different applications, along with accessories like process adapters and thermowells. Product specifications include measuring ranges, installation depths, outputs, and order numbers. The modular concept of combining temperature probes, connection cables, and evaluation units is also highlighted.
These level transmitters use invisible, eye-safe, infrared laser pulses to measure the distance to the surface. The on-board microprocessor calculates the distance by multiplying the known speed of light by the laser pulse travel time from
the transmitter to the surface and back.
The laser beams have very little divergence (<0.3°) so that accurate targeting is easy even in silos or vessels that have internal structures. Moreover, the narrow beam doesn’t interact with local structures or build-up on vessel walls, making the measurement very reliable even when the environment changes. This means no reconfiguration, no down-time, and reduced lifetime costs.
This document provides information on IFM's position sensors product line, including capacitive sensors with IO-Link interface and photoelectric sensors for general applications. Key details include product types, features, specifications, and ordering information.
This document discusses various probes that can be used with the testo 400 measuring device. It provides details on 12 different probe types, including hot wire probes, vane probes, temperature-humidity probes, and a lux probe. Each probe is described in 1-2 paragraphs covering its measurement capabilities, technical specifications, and price. The document is aimed at providing information on the various probe options available for different measurement applications like air velocity, volume flow, temperature, humidity, and light intensity.
The document provides information about IO-Link and ifm electronic's IO-Link product portfolio, including:
- IO-Link masters that connect intelligent sensors to fieldbuses and support up to 4 or 8 IO-Link ports per module.
- The StandardLine Coolant and StandardLine Food series of IO-Link masters that are designed for harsh industrial environments and hygienic areas, respectively.
- Technical specifications and accessories for the IO-Link masters, including connection cables, input/output modules, and configuration software.
- Benefits of IO-Link such as digital data transmission, sensor identification and replacement, wire break detection, and direct connection to IT systems.
The document discusses vibration monitoring systems for condition monitoring of machines. It provides an overview of sensors, diagnostic electronics, software, and accessories for monitoring vibration velocity, acceleration, and dynamic forces. The systems allow early detection of machine faults, avoidance of consequential damage, and integration into automation and control systems.
The document appears to be a catalog listing various automation technology products including sensors, switches, and cables. It provides product codes, specifications such as voltage and temperature ranges, dimensions, material information, and other technical details for each product listed. The document contains images and diagrams alongside tables of information.
Configuración sencilla gracias al
asistente de configuración.
Comunicación:
Interfaces Ethernet, Profibus,
Profinet, EtherCAT, etc.
Para aplicaciones
industriales
Seguridad en máquina herramienta.
El SmartPLC supervisa la seguridad
de la máquina a través de las entradas
de seguridad y controla el proceso
mediante el PLC estándar.
SmartPLC
Tipo AC500S
Entradas de
seguridad
Salidas de
seguridad
Ethernet
Profibus
Profin
Vision sensors for recognition and assessment of objects and scenesifm electronic gmbh
The document discusses various types of industrial vision sensors produced by ifm for applications including object recognition, inspection, identification, and 3D sensing. It provides an overview of the O2D contour sensor, O2V pixel counter, O2I code reader, and O3D 3D sensor. These vision sensors offer robust designs, integrated lighting and processing, and ease of use comparable to traditional sensors. The document also highlights example applications such as quality control, completeness checking, and object identification/dimensioning.
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Essentials of Automations: Exploring Attributes & Automation ParametersSafe Software
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
Northern Engraving | Modern Metal Trim, Nameplates and Appliance PanelsNorthern Engraving
What began over 115 years ago as a supplier of precision gauges to the automotive industry has evolved into being an industry leader in the manufacture of product branding, automotive cockpit trim and decorative appliance trim. Value-added services include in-house Design, Engineering, Program Management, Test Lab and Tool Shops.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providersakankshawande
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
What is an RPA CoE? Session 1 – CoE VisionDianaGray10
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...Fwdays
Direct losses from downtime in 1 minute = $5-$10 thousand dollars. Reputation is priceless.
As part of the talk, we will consider the architectural strategies necessary for the development of highly loaded fintech solutions. We will focus on using queues and streaming to efficiently work and manage large amounts of data in real-time and to minimize latency.
We will focus special attention on the architectural patterns used in the design of the fintech system, microservices and event-driven architecture, which ensure scalability, fault tolerance, and consistency of the entire system.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdfChart Kalyan
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-EfficiencyScyllaDB
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
inQuba Webinar Mastering Customer Journey Management with Dr Graham HillLizaNolte
HERE IS YOUR WEBINAR CONTENT! 'Mastering Customer Journey Management with Dr. Graham Hill'. We hope you find the webinar recording both insightful and enjoyable.
In this webinar, we explored essential aspects of Customer Journey Management and personalization. Here’s a summary of the key insights and topics discussed:
Key Takeaways:
Understanding the Customer Journey: Dr. Hill emphasized the importance of mapping and understanding the complete customer journey to identify touchpoints and opportunities for improvement.
Personalization Strategies: We discussed how to leverage data and insights to create personalized experiences that resonate with customers.
Technology Integration: Insights were shared on how inQuba’s advanced technology can streamline customer interactions and drive operational efficiency.
The Microsoft 365 Migration Tutorial For Beginner.pptxoperationspcvita
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor IvaniukFwdays
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
This talk will cover ScyllaDB Architecture from the cluster-level view and zoom in on data distribution and internal node architecture. In the process, we will learn the secret sauce used to get ScyllaDB's high availability and superior performance. We will also touch on the upcoming changes to ScyllaDB architecture, moving to strongly consistent metadata and tablets.
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...DanBrown980551
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
Main news related to the CCS TSI 2023 (2023/1695)Jakub Marek
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
2. 3
3D Smart Sensor – your assistant on mobile machines
True 3D vision sensor
Camera systems for mobile machines
(04.2016
(04.2016
Industrial imaging
”K=1“ sensors with high-quality stainless steel housing
Sensors for factory automation with correction factor K=1
Electromagnetic field immune ”K=1“ sensors for welding applications
Inductive sensors
Photoelectric sensors for general applications
When oil is all over – the new O6 coolant
“O6 wetline” now with IO-Link
(11.2015)
(11.2014)
(04.2016)
(11.2015)
(11.2015)
Position sensors
6 - 7
8 - 9
10 - 11
Ingeniously simple: display guide for the perfect setting
Capacitive sensors
(04.2016) 12 - 13
500 bar? No problem! New hydraulic sensors
New pressure-resistant position sensors
Cylinder sensors
(04.2016)
(04.2015)
14 - 15
16 - 17
22 - 23
24 - 25
Ultrasonic sensors
Compact ultrasonic sensors
Object detection for long ranges and difficult surfaces
(04.2016)
(04.2016)
18 - 19
20 - 21
Intelligent incremental encoder with display and IO-Link
Encoders
(04.2015)
Sensors for motion control
26 - 27
Sensor and evaluation in one housing – also with ATEX approval
Speed sensors
(04.2016) 28 - 29
High-resolution 3D camera for innovative vision integration
3D cameras
(11.2015)
Robust and precise inclination sensors – now with IO-Link
Inclination sensors
(11.2015) 30 - 31
TOP
TOP
TOP
TOP
TOP
TOP
TOP
Completeness monitoring for the packaging technology
Volume determination for storage and conveyor technology
3D sensors
(11.2015)
(11.2015)
TOP
TOP
TOP
TOP
TOP
TOP
TOP
32 - 33
34 - 35
40 - 41
36 - 37
38 - 39
3. 4
Flow sensors / flow meters
New benchmark in thermal flow measurement
New flow sensor now also for smallest quantities
(11.2015)
(11.2015)
Safety 4.0: the safe SmartPLC
With signal effect: AS-i module for OSSD inputs
AS-Interface Safety at Work
(11.2015)
(11.2015)
Industrial communication
Repeater to extend AS-i networks up to 1000 m
AS-Interface cable extensions
(04.2016)
8-port IO-Link master module with LINERECORDER AGENT embedded
IO-Link – the standard interface for smart sensors
Industry 4.0 made easy – Apps instead of expensive programming
System solutions
(04.2015)
(04.2015)
(11.2015)
Temperature sensors
Evaluates temperatures up to 600 °C: the TR with a new look
Modern classic: new TN temperature sensor
Temperature sensors for mobile machines
(11.2015)
(04.2016)
(04.2016)
Process sensors
Hygienic point level sensor especially for hazardous areas
Continuous level measurement in harsh environments
Continuous level measurement with analogue output and IO-Link
(11.2015)
(11.2015)
(11.2015)
Level sensors
Pressure sensors
Small and cost-optimised for mobile machines
Hydrostatic level measurement for a wide range of applications
New PT absolute pressure transmitter with different measuring ranges
IO-Link display: process values at a glance
(04.2016)
(04.2016)
(04.2016)
(11.2015)
RFID evaluation system DTE now with EtherCAT
Adapters to increase the ranges of the new RFID antennas
RFID 125 kHz / RFID 13.56 MHz
(04.2016)
(11.2015)
Identification systems
RFID with CANopen or J1939 interface for mobile machines
RFID 13.56 MHz
(04.2016)
TOP
TOP
TOP
TOP
TOP
TOP
50 - 51
52 - 53
68 - 69
70 - 71
66 - 67
72 - 73
74 - 75
76 - 77
60 - 61
62 - 63
64 - 65
54 - 55
56 - 57
58 - 59
42 - 43
44 - 45
46 - 47
48 - 49
78 - 79
80 - 81
82 - 83
4. 5
Electronic fuse (04.2016)
Accessories
Compact vibration monitoring of two measurement points
Vibration monitoring systems
(11.2015)
Condition monitoring systems
Power management in mobile vehicles
Mobile controllers
(11.2015)
Systems for mobile machines
Powerful switched-mode power supply with an enormous power reserve
24 V DC switched-mode power supplies
(04.2016)
Power supplies
From factory automation to machine tool industry
Sockets
(11.2015)
Connection technology
For hygienic and wet areas in the food industry
The secure connection even in difficult applications
T splitters
(11.2015)
(11.2015)
84 - 85
86 - 87
94 - 95
96 - 97
88 - 89
90 - 91
92 - 93
5. 6
Inductive sensors for factory
automation with correction
factor K=1
Constant correction factor
”K=1“ sensors have the same sensing range for all
types of metals. They are for example perfectly suited
for the detection of aluminium, where conventional
sensors show a considerably reduced sensing range.
The high switching frequencies enable the monitoring
of fast changing switching states.
The resistant stainless steel sleeve allows reliable use
in oil and coolant applications. The wide temperature
range as well as the high protection ratings enable
universal use of the new ”K=1“ sensors.
Uniform sensing range for the reliable
detection of all metals
Compact dimensions for use in the
smallest of space
Electromagnetic field immune sensor
technology to prevent incorrect switching
High-quality stainless steel housing
High reliability thanks to protection
rating from IP 65 / IP 69K
One sensing range for all metals
Position sensors
6. 7
(04.2016)
Inductive sensors
Position sensors
Sensing range
[mm]
Current rating
[mA]
Switching
frequency
[Hz]
Order
number
M12 connector · 3 wire DC PNP · Output function normally open
InstallationType Total length
[mm]
Operating voltage [V DC] 10...30
Reverse polarity protection •
Short-circuit protection •
Overload protection •
Protection rating
IP 65 / IP 66 / IP 67 /
IP 68 / IP 69K
Protection class III
Ambient temperature [°C] -40...85
Output status indication [LED] yellow (4 x 90°)
Further technical dataConnection technology
Type Version Order
number
Socket, M12,
2 m black, PUR cable
EVC001
Socket, M12,
5 m black, PUR cable
EVC002
Socket, M12,
2 m black, PUR cable
EVC004
Socket, M12,
5 m black, PUR cable
EVC005
For further technical details please visit: www.ifm.com
Housing materials
High-grade stainless steel
(316L)
sensing face
LCP
45 4 1002000 IFS297M12
M12
M12
M12
M18
M18
45 8 1002000 IFS298
45 10 1002000 IFS299
60 4
flush
non-flush
non-flush
flush 1002000 IFS304
M12
M12
60 8 1002000 IFS305
60 10
non-flush
non-flush 1002000 IFS306
45 8 1002000 IGS287
45 12 1002000 IGS288
flush
non-flush
M18
M18
45 15 1002000 IGS289
60 8 1002000 IGS290
non-flush
flush
M18
M18
60 12 1002000 IGS291
60 15 1002000 IGS292
non-flush
non-flush
M30
M30
45 15 1002000 IIS281
60 15 1002000 IIS282
flush
flush
M30 60 22 1002000 IIS283non-flush
M30 60 30 1002000 IIS284non-flush
Dimensions
Example IFS297
Example IFS306
Example IGS287
Example IGS292
Example IIS281
Example IIS284
34
30
M12x1
4
M12x1
45
LED 4 x 90°
17
4
17LED 4 x 90°
35
49
60
M12x1
M12x1
10
M18x1
M12x1
30
45
34
4
LED 4 x 90° 24
M18x1
30 15
M12x1
60
LED 4 x 90°
49
24
4
45
34
30
LED 4 x 90°
M12x1
M30x1,5
5
36
45
49
60
22,5
M30x1,5
M12x1
LED 4 x 90°
5
36
7. 8
Inductive sensors for factory
automation with correction
factor K=1
Constant correction factor
”K=1“ sensors have the same sensing range for all
types of metals. They are for example perfectly suited
for the detection of aluminium, where conventional
sensors show a considerably reduced sensing range.
The high switching frequencies enable the monitoring
of fast changing switching states. With the new sensor
technology, these sensors are insensitive to magnetic
fields and can for example be reliably used right next to
electrical brakes. The wide temperature range as well
as the high protection ratings enable universal use of
the new ”K=1“ sensors.
Uniform sensing range for the reliable
detection of all metals
Compact dimensions for use in the
smallest of space
Electromagnetic field immune sensor
technology to prevent incorrect switching
Wide temperature range for universal use
High protection ratings up to
IP 68 / IP 69K
One sensing range for all metals
Position sensors
8. 9
(11.2015)
Inductive sensors
Position sensors
Dimensions
Example IFS290
Example IFS285
Example IGS280
Example IFS277
Example IIS269
Example IIS268
Sensing range
[mm]
Current rating
[mA]
Switching
frequency
[Hz]
Order
number
M12 connector · 3 wire DC PNP · Output function normally open
45 4 1002000 IFS289M12
M12
M12
M12
M18
M18
45 10 1002000 IFS290
60 4 1002000 IFS285
60 10
Installation
flush
non-flush
flush
non-flush 1002000 IFS286
45 8 1002000 IGS279
45 15 1002000 IGS280
flush
non-flush
M18
M18
60 8 1002000 IGS277
60 15 1002000 IGS278
flush
non-flush
M30
M30
45 15 1002000 IIS269
60 15 1002000 IIS267
flush
flush
M30 60 30 1002000 IIS268non-flush
Type Total length
[mm]
Operating voltage [V DC] 10...30
Reverse polarity protection •
Short-circuit protection •
Overload protection •
Protection rating
IP 65 / IP 66 / IP 67 /
IP 68 / IP 69K
Protection class III
Ambient temperature [°C] -40...85
Output status indication [LED] yellow (4 x 90°)
Further technical data
Connection technology
Type Version Order
number
Socket, M12,
2 m black, PUR cable
EVC001
Socket, M12,
5 m black, PUR cable
EVC002
Socket, M12,
2 m black, PUR cable
EVC004
Socket, M12,
5 m black, PUR cable
EVC005
For further technical details please visit: www.ifm.com
Housing materials
brass
plated with white bronze,
sensing face
LCP
34
25
M12x1
17
4
M12x1
45
LED 4 x 90°
5
49
45
M12x1
M12x1
60
LED 4 x 90° 17
4
M18x1
M12x1
45
49
60
LED 4 x 90° 24
4
45
34
30
LED 4 x 90°
M12x1
M30x1,5
5
36
45
49
60
22,5
M30x1,5
M12x1
LED 4 x 90°
5
36
LED 4 x 90°
45
34
1515
M12x1
4
M18x1
24
9. 10
Electromagnetic field immune
”K=1“ sensors for welding
applications
Use in harsh welding applications
The inductive ”K=1“ sensors withstand harsh operating
conditions and reliably detect metal objects even in
case of soiling.
The sensor housing and the fixing nuts have a non-stick
coating to prevent sticking of weld slag. Strong magnetic
fields occur in welding processes.
The new sensor technology prevents incorrect switching.
The quick connection with the connector and matching
cable from the ecolink range is the ideal basis for
permanent use.
Uniform sensing range for the reliable
detection of all metals
Robust design with non-stick coating
Electromagnetic field immune sensor
technology to prevent incorrect switching
Wide temperature range for universal use
High protection ratings up to
IP 68 / IP 69K
One sensing range for all metals
Position sensors
10. 11
(11.2015)
Inductive sensors
Position sensors
Dimensions
IFW204
IGW202
IIW202
Sensing range
[mm]
Current
load
[mA]
Switching
frequency
[Hz]
Order
number
M12 connector · 3 wire DC PNP · Output function normally open
65 4 1002000 IFW204M12
M18
M30
65 8 1002000 IGW202
65 15 1002000 IIW202
Installation
flush
flush
flush
Type Total length
[mm]
Operating voltage [V DC] 10...30
Current consumption [mA] < 20
Reverse polarity protection •
Short-circuit protection •
Overload protection •
Protection
IP 65 / IP 66 / IP 67 /
IP 68 / IP 69K
Protection class II
Ambient temperature [°C] -40...85
Housing materials
brass
anti-spatter,
sensing face LCP
Switching status indication [LED] yellow (4 x 90°)
Further technical data
Connection technology
Type Version Order
number
Socket, M12,
2 m grey, PUR cable
EVW001
Socket, M12,
5 m grey, PUR cable
EVW002
Socket, M12,
10 m grey, PUR cable
EVW003
Socket, M12,
2 m grey, PUR cable
EVW004
Socket, M12,
5 m grey, PUR cable
EVW005
Socket, M12,
10 m grey, PUR cable
EVW006
For further technical details please visit: www.ifm.com
Accessories
Type Version Order
number
M12 mounting sleeve with end stop,
anti-spatter
E12452
M18 mounting sleeve with end stop,
anti-spatter
E12453
M30 mounting sleeve with end stop,
anti-spatter
E12454
M12 washers,
anti-spatter
E12412
M18 washers,
anti-spatter
E12413
M30 washers,
anti-spatter
E12414
65
54
50
M12x1
M12x1
17
4
LED 4 x 90°
65
50
24
4
54
LED 4 x 90°
M18x1
M12x1
65
50
54
M12x1
36
M30x1,5
5
LED 4 x 90°
11. 12
Position sensors
Ingeniously simple:
display guide
for the perfect setting
Visualised switch point
The new capacitive sensors stand out not only because
of their excellent technical data but most of all with
their new and unique visualisation concept. Using a
12-LED bar display the user can always adapt the switch
point to suit the application conditions – it is always
in the centre of the display. The green LEDs either side
of the switch point indicate the reliability of the switch
point. Deposits, material changes etc. are directly
displayed on the sensor and the user can readjust
perfectly the switch point as needed. An imminent
error can be detected in good time and avoided thus
minimising the risk of failures or deactivation.
Diagnostic support
If help is needed with the effects of process changes
this is much easier to explain and rectify with the clear
switch-point visualisation.
Unique display and handling concept
with LED visualisation
See and compensate switch point
movement
IP 69K gives high ingress resistance
PNP/ NPN, NO/ NC, timer function
For medium temperatures up to 110 °C
Capacitive sensor is so easy to set
12. 13
(04.2016)
For further technical details please visit: www.ifm.com
Position sensors
Capacitive sensors
Type Output stage Sensing range
[mm]
Protection rating/
protection class
Order
no.
PerfomanceLine · M12 connector ·3 wires
Setting range
[mm]
Communication
interface
StandardLine · connection cable 2 m PVC· 3 wires
Memory plug, parameter memory
for IO-Link sensors
E30398
IO-Link master with
EtherNet/IP interface
AY1020
Operating voltage [V DC]
Short-circuit protection •
Reverse polarity / overload protection • / •
Ambient temperature [°C] -25...80
Further technical data
Connection technology
Type Description Order
no.
M12 socket,
2 m black, PUR cable
EVC001
M12 socket,
5 m black, PUR cable
EVC002
M12 socket,
2 m black, PUR cable
EVC004
M12 socket,
5 m black, PUR cable
EVC005
IO-Link master with
Profibus interface
AL1010
Mounting clamp with end stop for
M30 types
E11049
Fixing clamp with reducing bush for
M30 types
E10077
Angle bracket for M30 types E10737
Mounting adapter for M30 types,
G1 1/1", POM
E11033
Type Description Order
no.
Accessories
Dimensions
11 x LED 36
M30x1,5
50
8012
51 2
M12x1
Example KI6000
L+
L
1
4
3
Wiring
KI6000
USB IO-Link master for parameter setting
and analysis of units
Supported communication protocols:
IO-Link (4.8, 38.4 and 230 kBits/s)
E30390
Mounting accessories
IO-Link
Switching frequency [HZ] 40
Medium temperature [°C] -25...110
Housing material PBT
M30 25 nf IP 65, IP 67, IP 69K / III KI60000...40
M30 25 nf IP 65, IP 67, IP 69K / III KI5300
M30 25 nf IP 65, IP 67, IP 69K / III KI5301
0...40
0...40
IO-Link COM 2
IO-Link COM 2
M30 25 nf IP 65, IP 67, IP 69K / III KI5302
M30 25 nf IP 65, IP 67, IP 69K / III KI5303
0...40
0...40
IO-Link COM 2
IO-Link COM 2
M30 IP 65, IP 67, IP 69K / III KI5304
M30 IP 65, IP 67, IP 69K / III KI5305
IO-Link COM 2
IO-Link COM 2
IO-Link COM 2PNP, NO/NC
NPN, NO
PNP, NC
NPN, NC
PNP, NO
PNP, NC 15 f
PNP, NO 15 f
0...24
0...24
1) Potentiometer (sensing range)
2) Changeover switch for switching function
13. 14
Very robust position sensors
with 1 mm-thick metal face
Function principle
The new MFH series sensor is suited for flush mounting
in various steels. With its 1.8 mm sensing range it shows
reliable switching characteristics.
The new operating principle of this unit is based on
a magnetic-inductive technology that detects only
ferromagnetic metals (e.g. steel). It is sealed by means
of an O-ring and a supporting ring towards the pressure
area.
Applications
Besides use in hydraulic cylinders, the sensor is also
ideal for other hydraulic components such as valves
or pumps. MFH operates reliably for the lifetime of the
cylinder. Furthermore, it is used in mechanical engineer-
ing processes, e.g. in plastic injection-moulding or pro-
cess industry applications.
Its attractive price means the sensor can also be con-
sidered for simple components where this option used
to be too expensive.
Extremely pressure resistant with over
10 million pressure cycles
Best value performer
Complementary output provides higher
operational reliability
Standard M12 housing with
ingress-resistant cable entry
Short housing (40 mm) for extremely
low-profile cylinders
500 bar? No problem!
New hydraulic sensors
Position sensors
14. 15
(04.2016)
M12x1
10
1824,8
4
17
M12x1
9,7
7,8
60
Cylinder sensors
Position sensors
For further technical details please visit: www.ifm.com
Connection technology
Type Description Order
no.
M12 socket,
2 m black, PUR cable, LED
EVC644
Y splitter, ”OR“
M12 connector / 2x M12 socket
EBC117
Y splitter, ”AND“,
M12 connector / 2x M12 socket
EBC118
Type Sensing
range
[mm]
Housing
length
[mm]
LED OutputAmbient
temperature
[°C]
Order
no.
Cable connection
M12 1.8 f40 • PNP, NO-25...85 MFH205
M12 1.8 f40 • NPN NO-25...85 MFH206
M12 1.8 f40 • PNP, NC-25...85 MFH207
M12 1.8 f40 • PNP, NO/NC-25...85 MFH208
M12 1.8 f60 – PNP, NO/NC-25...120 MFH209
Operating voltage [V] 10...36 DC
Current rating [mA] 200
Switching frequency [Hz] 1000
Short-circuit protection,
pulsed
•
Protected against reverse polarity /
overload protected
• / •
Operating pressure [bar] 500
Pressure rating , static [bar] 1000
Burst pressure [bar] 2000
Protection rating,
protection class
IP 65 / IP 68 / IP 69K,
III
Housing material
stainless steel
1.4404
Common technical data
Accessories
Type Description Order
no.
Optical particle monitor LDP100
Seal process connection,
set 5 O-rings + 5 supporting rings
E12451
Switched-mode power supply
24 V DC / 5 A, metal housing
DN4012
Dimensions
Example MFH205
MFH209
Wiring
M12 connector, complementary
M12 socket,
2 m black, PUR cable
EVC001
MFH205 MFH209
10
1820
4
17
M12x1
9,7
7,8
40
BN
BK
BU
L+
L
4
L
L+
1
2
32:
4:
15. 16
Sensors for pressure up to
500 bar for steel detection
Operating principle
The new operating principle is based on a magnetic-
inductive technology that detects only ferromagnetic
metals (e.g. tool steel). The sensor is flush-mountable.
Even in case of overflush installation the sensor detects
the steel target and shows reliable switching behaviour
with a sensing range of 1.8 mm. A sealing ring and
a supporting ring are used for sealing against the
pressure zone.
Application examples
Besides use as a limit switch in hydraulic cylinders, the
sensor can also be used on other hydraulic components
such as valves or pumps. Furthermore, it is used in
mechanical engineering processes, e.g. in plastic injection-
moulding or process industry applications. The new
MFH and M9H series sensors offer an impressive perfor-
mance at an attractive price.
Metal sensing face for heavy duty
High burst pressure of 2,000 bar for the
M12 housing
Standard M12 and M14 housing types
Best performance at an attractive price
Resistant:
withstands 10 million pressure cycles
New pressure-resistant
position sensors
Position sensors
16. 17
(04.2015)
M12x1
10
1527,8
4
17
M12x1
9,7
7,8
60
Cylinder sensors
Position sensors
For further technical details please visit: www.ifm.com
Connection technology
Type Description Order
no.
Socket, M12,
2 m black, PUR cable
EVC001
Socket, M12,
5 m black, PUR cable, LED
EVC008
Cable socket, M12, shielded, 120 °C
5 m black, PUR cable
E12339
Cable socket, M12, shielded, 120 °C
10 m black, PUR cable
E12340
Type Sensing
range
[mm]
Total length
[mm]
f
[Hz]
OutputAmbient
temperature
[°C]
Order
no.
Operating principle: magnetically biased
M12 1.8 f93 1000 PNP, normally open-25...120
M12 1.8 f93 1000 NPN, normally open-25...120
M12 1.8 f60 1000 PNP, normally open-25...120
M12 1.8 f60 1000 NPN, normally open-25...120
M12 1.8 f60 1000 PNP, normally closed-25...120
M14 1.8 f53 1000 PNP, normally open-25...85
Operating voltage [V] 10...36 DC
Current rating [mA] 200
Short-circuit protection,
pulsed
•
Reverse polarity /
overload protection
• / •
Protection rating,
protection class
IP 65 / IP 68 / IP 69K,
III
Connection M12 connector
Housing material
stainless steel
316L / 1.4404
Common technical data
Power supplies
Type Description Order
no.
Plastic housing,
24 V DC, 2.5 A
DN1031
Metal housing,
24 V DC, 3.3 A
DN4011
Dimensions
Example MFH202
L+
L
1
4
3
Wiring diagram
L+
L
1
2
3
Two designs for many different requirements
The MFH with its standard M12 housing can be installed
and adjusted on many different hydraulic cylinders.
That is why most cylinder types are covered by only one
sensor.
Due to its end stop the M9H allows quick mounting.
The processing / installation time is reduced if always
the same cylinder type is used.
MFH200
MFH201
MFH202
MFH203
MFH204
M9H200
17. 18
Object detection for long
ranges and difficult surfaces
The alternative for difficult surfaces
Ultrasonic sensors transmit and receive sound waves in
the ultrasonic range. The object to be detected reflects
the sound waves and the distance information is deter-
mined via time of flight measurement. As opposed to
photoelectric sensors colour, transparency or the object’s
surface shine do not play a role. Blister packages in
packaging technology or transparent plastic bowls in
the food industry, for example, can be reliably detected.
High performance
The ifm ultrasonic sensors in M18 design provide a par-
ticularly small blind zone and long sensing ranges
which are usually only achieved by sensors of a consid-
erably larger design.
The sensors operate reliably with heavy soiling so that
they can be used in applications in which photoelectric
sensors meet their limits.
Robust high-grade stainless steel housing
for demanding applications
Sensing range up to 1.2 m in M18 cube
design and 2.2 m in M18 design
The vibrating sound transducer reduces
the deposit of dirt
Retro-reflective operation for orientation-
independent object detection
Easy setting via teach button, wire teach
or IO-Link
Compact ultrasonic sensors
Position sensors
18. 19
(04.2016)
Ultrasonic sensors
Diffuse-reflection sensor · 3-wire DC
Housing length/
dimensions
[mm]
Setting
60
Type
Wire
Order
no.
UGT500
Position sensors
300 mm*
Order
no.
UGT503
800 mm*
Order
no.
UGT506
1200 mm*
Order
no.
–
1600 mm*
* Max. range
Output
PNP
60 Wire UGT501 UGT504 UGT507 –4...20 mA
60 Wire UGT502 UGT505 UGT508 –0...10 V
Diffuse-reflection sensor · 4-wire DC
53 x 20 x 38 Pushbutton UGT580
300 mm*
UGT582
800 mm*
UGT584
1200 mm*
–
1600 mm*
PNP + 4…20 mA
53 x 20 x 38 Pushbutton UGT581 UGT583 UGT585 –PNP + 0…10 V
53 x 20 x 38 Pushbutton UGT586 UGT588 UGT590 –NPN + 4…20 mA
53 x 20 x 38 Pushbutton UGT587 UGT589 UGT591 –NPN + 0…10 V
Diffuse-reflection sensor · 5-wire DC, IO-Link
98 Pushbutton, IO-Link –
300 mm*
–
800 mm*
–
1200 mm*
UGT509
1600 mm*
2 x PNP
98
98
98
98
98
Pushbutton, IO-Link – – –
– – –
– – –
– – –
– – –
UGT510PNP + 4…20 mA
Pushbutton, IO-Link UGT511PNP + 0…10 V
Pushbutton UGT5152x NPN
Pushbutton UGT516NPN + 4…20 mA
Pushbutton UGT517NPN + 0…10 V
Retro-reflective sensor · 4-wire DC
98
M18
M18
M18
M18 Cube
M18 Cube
M18 Cube
M18 Cube
M18
M18
M18
M18
M18
M18
M18 Pushbutton –
300 mm*
–
800 mm*
–
1200 mm*
UGR500
1600 mm*
Order
no.
–
2200 mm*
–
–
–
2200 mm*
–
–
–
UGT512
2200 mm*
Diffuse-reflection sensor · 5-wire DC 300 mm* 800 mm* 1200 mm* 1600 mm* 2200 mm*
UGT513
UGT514
UGT518
UGT519
UGT520
UGR501
2200 mm*
PNP
For further technical details please visit: www.ifm.com
Accessories
Type Description Order
no.
Mounting set for clamp mounting,
diecast zinc, Ø 12 mm
E20720
Mounting set for clamp mounting,
stainless steel, Ø 12 mm
E21206
Mounting set for clamp mounting,
diecast zinc, Ø 12 mm
E20721
Mounting set for clamp mounting,
stainless steel, Ø 12 mm
E21207
Rod, 100 mm, Ø 12 mm,
M10 thread, stainless steel
E20938
Rod, 200 mm, Ø 10 mm,
M10 thread, stainless steel
E20940
Cube for mounting on an aluminium
profile, M10 thread, diecast zinc
E20951
Common technical data
Operating voltage [V DC] 10...30
Temperature compensation •
Operating temperature range [°C] -20...70
Current rating [mA]
Switching output
100
Protection IP 67
Echo LED green
Status indications LED yellow
Connection M12 connector
Connection technology
Type Description Order
no.
Socket, M12, 4-pole
2 m orange, PVC cable
Socket, M12, 4-pole
5 m orange, PVC cable
Socket, M12, 4-pole
2 m black, PUR cable
Socket, M12, 4-pole
5 m black, PUR cable
Socket, M12, 4-pole
2 m black, PUR cable
Socket, M12, 4-pole
5 m black, PUR cable
60 Wire UGT521 UGT522 UGT523 –NPNM18 –
98M18 Pushbutton – – – UGR502 UGR503NPN
EVT064
EVT001
EVC001
EVC002
EVC004
EVC005
19. 20
Object detection for long
ranges and difficult surfaces
The alternative for difficult surfaces
Ultrasonic sensors transmit and receive sound waves in
the ultrasonic range. The object to be detected reflects
the sound waves and the distance information is deter-
mined via time of flight measurement. As opposed to
photoelectric sensors colour, transparency or the object’s
surface shine do not play a role. Blister packages in
packaging technology or transparent plastic bowls in
the food industry, for example, can be reliably detected.
High performance
The ifm ultrasonic sensors in M18 design provide a par-
ticularly small blind zone and long sensing ranges
which are usually only achieved by sensors of a consid-
erably larger design.
The sensors operate reliably with heavy soiling so that
they can be used in applications in which photoelectric
sensors meet their limits.
M18 plastic housing available in the two
lengths 60 mm and 98 mm
Long ranges from 300 mm to 2200 mm
available
The vibrating sound transducer reduces
the deposit of dirt
Digital and analogue output for point level
measurement and distance detection
Easy setting via teach button, wire teach
or IO-Link
The new ultrasonic sensors
Position sensors
20. 21
(04.2016)
Ultrasonic sensors
Diffuse-reflection sensor · 3-wire DC
Housing length/
dimensions
[mm]
Setting
60
Type
Wire
Order
no.
Position sensors
300 mm*
Order
no.
800 mm*
Order
no.
1200 mm*
Order
no.
–
1600 mm*
* Max. range
Output
PNP
Diffuse-reflection sensor · 5-wire DC, IO-Link
98 Pushbutton, IO-Link –
300 mm*
–
800 mm*
–
1200 mm* 1600 mm*
2 x PNP
98
98
Pushbutton, IO-Link – – –
– – –
PNP + 4…20 mA
Pushbutton, IO-Link PNP + 0…10 V
M18
M18
M18
M18
Order
no.
–
2200 mm*
2200 mm*
For further technical details please visit: www.ifm.com
Accessories
Type Description Order
no.
Mounting set for clamp mounting,
diecast zinc, Ø 12 mm
E20720
Mounting set for clamp mounting,
stainless steel, Ø 12 mm
E21206
Mounting set for clamp mounting,
diecast zinc, Ø 12 mm
E20721
Mounting set for clamp mounting,
stainless steel, Ø 12 mm
E21207
Rod, 100 mm, Ø 12 mm,
M10 thread, stainless steel
E20938
Rod, 200 mm, Ø 10 mm,
M10 thread, stainless steel
E20940
Cube for mounting on an aluminium
profile, M10 thread, diecast zinc
E20951
Common technical data
Operating voltage [V DC] 10...30
Temperature compensation •
Operating temperature range [°C] -20...70
Current rating [mA]
Switching output
100
Protection IP 67
Echo LED green
Status indications LED yellow
Connection M12 connector
Connection technology
Type Description Order
no.
Socket, M12, 4-pole
2 m black, PUR cable
EVC001
Socket, M12, 4-pole
5 m black, PUR cable
EVC002
Socket, M12, 4-pole
2 m black, PUR cable
EVC004
Socket, M12, 4-pole
5 m black, PUR cable
EVC005
Socket, M12, 5-pole
2 m black, PUR cable
EVC070
Socket, M12, 5-pole
5 m black, PUR cable
EVC071
Socket, M12, 5-pole
2 m black, PUR cable
EVC073
Socket, M12, 5-pole
5 m black, PUR cable
EVC074
L+
L
3
4
2
1
Wiring
Example UGT204
UGT200 UGT201 UGT202
UGT203
UGT204
UGT205
UGT206
UGT207
UGT208
60 Wire UGT209 UGT210 UGT211 –NPNM18 –
21. 22
Photoelectric sensor for use
with coolants / oils
The optimum choice in metalworking
The new high-performance O6 coolant sensors are
especially suited for applications in metal working.
Other applications are conveyor technology and the
automotive industry.
The potentiometers are fitted with a double seal.
The front pane is embedded flush. Viton which is
proven in demanding applications was chosen as the
sealing material. The transparent black housing cover
ensures that, even in bright lighting conditions, the
LEDs are highly visible.
Best optical performance
The diffuse reflection sensors provide reliable back-
ground suppression, even in cases of highly reflective
backgrounds and objects like the oily and greasy metal
surfaces of the parts to be worked. The sensing range
is independent of the type and colour of the object to
be detected.
The new O6 coolant reliably performs its duty in
applications with coolants / oils.
Long life due to resistant materials
Diffuse reflection sensor with reliable
background suppression
Range is independent of the object
colour
Design with 4-pole M8 connector
Stainless steel housing with protection
rating IP 68 / IP 69K
When oil is all over – the new
O6 coolant
Position sensors
22. 23
(11.2015)
Infrared sensors / red light sensors
Position sensors
For further technical details please visit: www.ifm.com
Diffuse reflection sensor with background suppression · 3-wire DC
Spot
diameter
[mm]
Connection
M8 connector
8*
Range
[mm]
2...200 4-pole
Current
consumption
[mA]
22
Diffuse reflection sensor · 3-wire DC
15*5...500 4-pole 16
Retro-reflective sensor with polarisation filter · 3-wire DC
150**50...5000 4-pole 12
Through-beam sensor – transmitter · 2-wire DC
300*0...10000 4-pole 11
Through-beam sensor – receiver · 3-wire DC
–0...10000 4-pole 7
Type of light,
wave length
[nm]
Red light, 633
Red light, 633
Red light, 645
Red light, 645
Red light, 645
* at maximum range, ** referred to prismatic reflector Ø 80 mm
Accessories
Type Description Order
no.
Common technical data
Operating voltage [V DC] 10...30
Switching status indication LED Yellow
Operation LED Green
Short-circuit protection, pulsed •
Reverse polarity protection /
overload protection
• / •
Ambient temperature [°C] -25...60
Voltage drop [V] < 2.5
Current rating [mA] 100
Materials Housing
Lens
Seal
High-grade stainless steel
(316L/1.4404), PPSU
PMMA
FKM
Switching frequency [Hz] 1000
Protection rating,
protection class
IP 65, IP 67, IP 68, IP 69 K,
III
O6H400O6H401
Order
no.
Order
no.
PNPNPN
O6T400O6T401
PNPNPN
O6P400O6P401
PNPNPN
O6S400
O6E400O6E401
PNPNPN
Angle bracket for free-standing
mounting, stainless steel
E21271
Protective bracket,
stainless steel
E21273
Mounting accessories
Plastic housing,
24 V DC, 2.5 A
DN1031
Metal housing,
24 V DC, 3.3 A
DN4011
Power supplies
Connection technology
Type Description Order
no.
Socket, M8, 4-pole
2 m black, PUR cable
EVC150
Socket, M8, 4-pole
5 m black, PUR cable
EVC151
Socket, M8, 4-pole
2 m black, PUR cable
EVC153
Socket, M8, 4-pole
5 m black, PUR cable
EVC154
Ø 50 mm, plastic E20956
Ø 80 mm, plastic E20005
48 x 48 mm, PMMA, ABS E20744
95 x 95 mm, plastic E20454
Prismatic reflectors
Mounting set for clamp mounting,
stainless steel, Ø 10 mm
E21272
Mounting set for clamp mounting,
stainless steel, Ø 12 mm
E21275
Rod, 120 mm, Ø 10 mm,
M8 thread, stainless steel
E21081
Rod, 100 mm, Ø 12 mm,
M10 thread, stainless steel
E20938
23. 24
Small and compact
photoelectric sensors now
also as IO-Link versions!
Best performance
The diffuse reflection sensors distinguish themselves by
reliable background suppression, even in case of highly
reflective backgrounds.
A special feature is the automatic switch point adjustment
that guarantees reliable operation even in steam, smoke
or highly reflective environments.
The WetLine series features a particularly robust stain-
less steel housing with protection rating IP 68 / IP 69K.
The potentiometer with double sealing ensures maximum
ingress resistance. The flush front lens ensures cleaning
without residues.
IO-Link
The O6 WetLine sensors are now also available as versions
with IO-Link. Via this interface, the user can set range,
sensitivity, light-on / dark-on mode, switching delay or
deactivation of the operating elements.
Stainless steel housing with protection
rating IP 68 / IP 69K
Diffuse reflection sensors with reliable
background suppression
Well-defined light spot for precise object
detection, no scattered light
Also available as through-beam or
retro-reflective system
Many functions can be set via IO-Link,
e.g. range and sensitivity
O6 WetLine now with IO-Link!
Position sensors
24. 25
(11.2014)
Infrared sensors / red light sensors
Position sensors
For further technical details please visit: www.ifm.com
Diffuse reflection sensor with background suppression · 3-wire DC · PNP
Light spot diameter
[mm]
Connection
M8 connector
Order
no.
8* O6H309
Range
[mm]
2...200 4-pole
Current
consumption
[mA]
22
Diffuse reflection sensor · 3-wire DC · PNP
15* O6T3095...500 4-pole 16
Retro-reflective sensor with polarisation filter · 3-wire DC · PNP
150** O6P30950...5000 4-pole 12
Through-beam sensor - transmitter · 2-wire DC
300*0...10000 4-pole 11 O6S305
Through-beam sensor – receiver · 3-wire DC · PNP
– O6E3090...10000 4-pole 7
Communication
interface
IO-Link 1.1
IO-Link 1.1
IO-Link 1.1
IO-Link 1.1
IO-Link 1.1
* at maximum range
** referred to prismatic reflector Ø 80 mm
Accessories
Type Description Order
no.
Mounting set for clamp mounting,
stainless steel, Ø 10 mm
E21272
Angle bracket for free-standing
mounting, stainless steel
E21271
Rod, 120 mm, Ø 10 mm,
M8 thread, stainless steel
E21081
Memory plug, parameter memory
for IO-Link sensors
E30398
IO-Link interface, current consumption
from USB port
E30396
LINERECORDER SENSOR,
software for parameter setting and
set-up of IO-Link sensors
QA0001
Common technical data
Operating voltage [V DC] 10...30
Type of light red light 633 nm
Switching status indication LED yellow
Operation LED green
Short-circuit protection, pulsed •
Reverse polarity protection /
overload protection
• / •
Ambient temperature [°C] -25...80
Voltage drop [V] < 2.5
Current rating [mA] 100
Materials housing
lens
high-grade stainless steel
(316L/1.4404), PPSU
PMMA
Connection technology
Type Description Order
no.
M8 socket, 4-pole,
2 m orange, PVC cable
M8 socket, 4-pole,
5 m orange, PVC cable
M8 socket, 4-pole,
2 m orange, PVC cable
M8 socket, 4-pole,
5 m orange, PVC cable
Adapter cable
M12 plug to M8 socket 4-pole,
0.3 m orange, PVC cable
EVT248
Switching frequency [Hz] 1000
Protection rating,
protection class
IP 65, IP 67, IP 68, IP 69K,
III
Light-on / dark-on mode adjustable
18 x 18 mm, Solidchem plastic E21267
56 x 38 mm, Solidchem plastic E21268
48 x 48 mm, Solidchem plastic E21269
96 x 96 mm, Solidchem plastic E21270
EVT134
EVT135
EVT138
EVT139
25. 26
Sensors for motion control
Motion controller: Encoder,
speed / direction monitor
and counter all in one
No compromises
The magnetic sensing principle provides the accuracy of
photoelectric encoders and the robustness of magnetic
systems.
Simple
Resolution and signal level can be programmed. The
encoders have a wide voltage range of 4.5...30 V DC
and are therefore suited for universal use.
Multifunctional
Performance Line encoders have an integrated signal
evaluation for speed monitoring, counter functions
and detection of the direction of rotation.
Intuitive
The encoders provide easy setting, position indication
by means of display and operating keys and intuitive
menu navigation.
Networked
Diagnostic and parameter data are reliably transferred
via IO-Link. Ready for Industry 4.0.
Resolution of 2...10,000 and signal level
(TTL / HTL) freely programmable
Display: Two-colour electronic rotatable
display of the process values
Versatile: M12 connector can be used
radially or axially
Standard fitting: Solid shaft (clamp /
synchro flange) or hollow shaft design
Transmission of process and diagnostic
data via IO-Link
Intelligent incremental encoder
with display and IO-Link
26. 27
(04.2015)
Encoders
For further technical details please visit: www.ifm.com
Sensors for motion control
Flange IO-LinkResolution
[pulse/revolution]
Order
no.
Hollow shaft with integrated stator coupling· 4-digit display · Integrated pulse evaluation
direct •max. 10,000 (adjustable) ROP52012
Operating voltage
[V DC]
4.5...30
Shaft Ø
[mm]
Solid shaft · 4-digit display · Integrated pulse evaluation
synchro •max. 10,000 (adjustable) RUP5006 4.5...30
clamp flange •max. 10,000 (adjustable) RVP51010 4.5...30
Protection IP 65, IP 67
Connection
M12 connector
(rotatable)
Further technical data
58
58
58
Housing Ø
[mm]
Switching frequency [kHz] 1000
Accessories
Type Description Order
no.
Spring disc coupling,
Ø 6 mm / 10 mm, die-cast zinc; PA
E60117
Spring disc coupling,
Ø 10 mm / 10 mm, die-cast zinc; PA
E60118
Flexible coupling with clamp connection,
Ø 6 mm / 10 mm, aluminium
E60066
Flexible coupling with clamp connection,
Ø 10 mm / 10 mm, aluminium
E60067
Flexible coupling with adjusting screws,
Ø 10 mm / 10 mm, aluminium
E60022
Flexible coupling with adjusting screws,
Ø 6 mm / 10 mm, aluminium
E60028
Measuring wheel,
Ø 159.15 mm / 10 mm, Hytrel TPE-E
E60110
Measuring wheel,
Ø 159.16 mm / 10 mm, aluminium, PU
E60076
Measuring wheel,
Ø 63.66 ± 0.1 mm / 10 mm, Hytrel TPE-E
E60138
Measuring wheel,
Ø 63.6 mm, 10 mm, aluminium
E60095
Measuring wheel,
Ø 63.66 ± 0.1 mm / 6 mm, aluminium
E60137
Measuring wheel,
Ø 63.6 mm, 6 mm, aluminium
E60006
Angle bracket for RUP design,
aluminium, black anodised
E60033
Angle bracket for RUP design,
aluminium, black anodised
E60035
Fastening clamp for
synchro flange, steel
E60041
Memory plug, parameter memory
for IO-Link sensors
E30398
LINERECORDER SENSOR,
Software for parameter setting and
set-up of IO-Link sensors
QA0001
Accessories
Type Description Order
no.
Connection technology
Type Description Order
no.
M12 socket, shielded,
5 m black, PUR cable, 8 poles
E12403
M12 socket, shielded,
10 m black, PUR cable, 8 poles
E12404
M12 socket, shielded,
2 m black, PUR cable, 8 poles
E12402
USB IO-Link master for parameter setting
and analysis of units
Supported communication protocols:
IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
Adapter cable for the connection
between USB IO-Link master E30390
and 4-pole / 8-pole encoder
E12432
Flexible coupling with clamp connection,
Ø 6 mm / 1/4", aluminium
E60206
Flexible coupling with clamp connection,
Ø 6 mm / 3/8", aluminium
E60207
Flexible coupling with clamp connection,
Ø 10 mm / 1/2", aluminium
E60208
Flexible coupling with clamp connection,
Ø 10 mm / 3/8", aluminium
E60209
Connection cable,
M23 plug / M12 socket,
PUR cable, shielded,
0,3 m black, 8 poles
E12460
27. 28
Sensors for motion control
Sensor and evaluation
in one housing – also with
ATEX approval
Compact speed monitoring
The new speed sensors are the compact solution for
speed monitoring because the evaluation electronics
are integrated in the sensor housing.
The limit at the speed of which the output switches is
set via a potentiometer. Both rotary and linear move-
ments can be monitored for overspeed, underspeed
and blockage.
As compared to its predecessors, these new sensors
feature a robust metal housing for flush mounting. An
additional impact protection housing is not required.
A special version with ATEX approval is also available.
Robust M30 metal housing, no additional
impact protection housing required
Ideal in combination with a PLC
Flush installation
Flexible voltage supply (20...250 AC/DC)
ATEX approval group II, category 3D
Robust speed sensors
28. 29
(04.2016)
Sensors for motion control
For further technical details please visit: www.ifm.com
Operating voltage
[V]
Start-up-delay
[s]
Ambient
temperature
[°C]
ATEX approvalMax. load current
[mA]
Order
no.
M30 x 1.5 inductive sensor · connection cable
20...250 AC/DC
(45...65 Hz, AC)
12 -25...80 –
350 AC (50 °C),
250 AC / 100 DC (80 °C)
DI0101
20...250 AC/DC
(45...65 Hz, AC)
< 0.5 -25...80 –
350 AC (50 °C),
250 AC / 100 DC (80 °C)
DI0104
20...250 AC/DC
(45...65 Hz, AC)
12 -20...60
Group II,
category 3D
200 AC / 100 DC (60 °C) DI103A
Speed sensors
Setting range [pulses/min] 5...3600
Switch point setting
Multiturn
potentiometer
Switching status indication LED 2 x yellow
Housing materials
Brass
special coating;
PA (Polyamid); TPE-U
Connection PUR cable, 2m
Protection rating IP 65, IP 67
Protection class II
Further technical dataApplications
Especially in the field of conveying technology the
compact speed sensors can be used for various applica-
tions, for example for monitoring belt conveyors or
bucket elevators. Here they are typically used to monitor
underspeed, blockage or standstill.
Advantages
The speed sensors incorporate the complete speed
monitoring because the evaluation electronics and the
sensor are integrated in one housing. The switch point
is set using a multi-turn potentiometer. Hysteresis and
start-up delay are firmly set.
Operation
The integrated sensor is damped by passing cams or
other metallic targets. On the basis of the time interval
between damping the evaluation unit determines the
period duration or the frequency (actual rotational
speed value) and compares it to the set switch point
(preset value).
The output is switched during the start-up delay and
when the rotational speed exceeds the set switching
value.
An LED signals underspeed and switch-off of the
output.
Dimensions
80
75,5
M30x1,5
5,4
2,2
36
5
1
LEDs
1) potentiometer
WH
BK
L1
L+
L
N
Wiring
Target wheel E89010
Mounting clamp with end stop for
M30 types
E11049
Fixing clamp with reducing bush for
M30 types
E10077
Angle bracket for M30 types E10737
Lock nuts, nickel-plated brass E10030
Lock nuts, high-grade stainless steel
(316Ti/1.4571)
E10031
Mounting set, free-standing M12
clamp mounting, Ø 30.2 mm
E20873
Mounting set, aluminium profile
clamp mounting, Ø 30.2 mm
E20875
Clamp with damping cams E89013
Accessories
Type Description Order
no.
29. 30
With analogue and switching
outputs as well as vibration
monitoring
Precision counts
The 2-axis inclination sensors are designed for high
measurement accuracies over the whole angular range.
All functions can be configured via IO-Link.
Thanks to an active temperature compensation and high
protection rating they operate reliably even at extreme
ambient temperatures and rough environments.
Vibration monitoring
Alternatively, JN2200 can also be used for 3-axis vibra-
tion monitoring. Up to 3 axes can be included into the
calculation of the characteristic value.
Typical applications are the detection of structural
vibration or tower vibration to ISO 4866, or machine
monitoring to ISO 10816.
High accuracy across the whole 2-axis
angular range up to 360°
Very low temperature drift due to active
temperature compensation
Visualisation of the operating and
switching states by clearly visible LEDs
Configurable current and voltage output
functions
Adjustable filter functions for different
applications.
Robust and precise inclination
sensors – Now with IO-Link
Sensors for motion control
30. 31
(11.2015)
90
75
22
45
62
5,3
36
4,5
Operating voltage [V DC]
with:
Switching and current outputs
Voltage output
IO-Link connection
9.2...30
12...30
18...30
Reverse polarity protection •
Angular range
Absolute accuracy
Repeatability
Resolution
JN2200
±180°/± 90°
≤ ± 0.5°
≤ ± 0.1°
≤ ± 0.05°
JN2201
± 45°
≤ ± 0.1°
≤ ± 0.05°
≤ ± 0.01°
Ambient temperature [°C] -40...85
Temperature coefficient [°/K] ≤ ± 0.002
Protection rating
IP 65 / IP 67 / IP 68 /
IP 69K
Number of measurement axes
with inclination
2
Frequency range [Hz] 0.1...400
Measuring range [g] ± 2, ± 4, ± 8
2
0.5...50
± 2
Number of measurement axes
with vibration
3 –
Housing material
diecast zinc
nickel-plated
Connection
2 x
M12 connector
(4 poles; A-coded)
Technical data
JN2200, JN2201
Inclination sensors
Connection technology
Type Description Order
no.
Socket, M12,
2 m black, PUR cable
EVM039
Socket, M12,
10 m black, PUR cable
EVM041
Socket, M12,
2 m black, PUR cable
EVM036
Socket, M12,
10 m black, PUR cable
EVM038
Jumper, M12,
5 m black, PUR cable
EVC069
Jumper, M12,
5 m black, PUR cable
EVC059
Accessories
Description Order
no.
Dimensions
Type
For further technical details please visit: www.ifm.com
Sensors for motion control
The products
Description Order
no.
Angular range ± 180° / ± 90°,
IO-Link
JN2200
Angular range ± 45°,
IO-Link
JN2201
Type
Communication interface
IO-Link 1.1,
COM 2,
38.4 kbaud
LINERECORDER SENSOR
Software for parameter setting and
set-up of IO-Link sensors
QA0001
USB IO-Link master for parameter setting
and analysis of units
Supported communication protocols:
IO-Link (4.8, 38.4 and 230 kBit/s)
E30390
Memory plug, parameter memory
for IO-Link sensors
E30398
31. 32
True 3D vision sensor with
intelligent functions
Mobile 3D smart sensors O3M
The 3D detection of scenes and objects, already a
standard on the factory floor, is ready for mobile
machines. Apart from new possibilities for vehicle
automation (AGV, automatic guided vehicles) this
results in new assistance functions for automation tasks.
Different integrated functions configurable via the
Windows software are available as standard.
The simple connection of the 3D smart sensors is carried
out via the CAN bus for mobile applications using the
CANopen or SAE J 1939 protocol and/or via the fast
Ethernet interface using UDP.
Simple application solutions thanks to
preprocessed 3D data
Easy integration via predefined CODESYS
function blocks
Patented pmd time-of-flight technology
for quick distance detection
Optimised for reliable outdoor use
with IP 67 and IP 69K
Angle of aperture up to 95°
3D Smart Sensor – your assistant
on mobile machines
Industrial imaging
32. 33
(04.2016)
Camera systems for
mobile machines
Description Order
no.
IR system illumination unit (850 nm) for mobile
3D sensors, angle of aperture 70 x 23
O3M950
IR system illumination unit (850 nm) for mobile
3D sensors, angle of aperture 95 x 32
O3M960
Further technical data
Smart sensors O3M151, O3M161
Accessories
Housing material diecast aluminium
Device connection M12 connector
Protection rating,
protection class
IP 67 / IP 69K,
III
Operating voltage [V DC] 9...32
Functions and advantages
Powerful 3D time-of-flight measurement (ToF)
The principle of these 3D sensors is based on ifm’s
patented and award-winning pmd technology.
It was specifically designed for outdoor use and difficult
ambient light situations. Even interference such as sun-
light or materials with different reflective characteristics
do not influence the repeatability of the measured data.
Powerful electronics
The integrated 2 x 32-bit processor architecture ensures
a rapid and reliable calculation of the 3D data and
functions directly integrated in the system with up to
50 fps. The complete electronics of the mobile 3D smart
sensor is optimised and adapted to the demands and
requirements of mobile machines.
Besides shock and vibration resistance self-diagnostic
functions from the sensor to the IR system illumination
unit are of course also available.
Smart functions
The mobile 3D smart sensors integrate some functions
which enable to solve a multitude of applications.
A highly developed algorithm from the automotive
industry is used ensuring, for example, reliable automatic
object recognition of up to 20 objects. This function
can, for example, be used as collision warning.
For simple distance tasks typical functions such as
minimum / maximum / average distance are available.
System parameter setting and monitoring
The parameter setting of the system and live monitoring
of the 3D data are carried out via the easy-to-use ifm
vision wizard for Windows. As an alternative, parameter
setting can also be carried out via function blocks using
the software CODESYS.
Communication interfaces
The preprocessed function data is output via the CAN
bus using CANopen or SAE J 1939. If needed, the
complete 3D information can be processed at the same
time via Ethernet UDP and an external process unit.
Current consumption sensor [mA] < 400
Current consumption [A]
system illumination unit
< 5
Ambient temperature [°C] -40...85
Interfaces
1x CAN,
1 x fast Ethernet
Supported CAN protocols CANopen, SAE J 1939
Standards and tests
(extract)
CE,
E1 (UN-ECE R10)
For further technical details please visit: www.ifm.com
Industrial imaging
CAN/RS232 USB interface CANfox EC2112
Adapter cable set for CANfox EC2114
Operating software for vision sensors E3D300
U-shaped holder,
suitable for sensor or illumination unit
E3M100
Connection technology
MCI cable, connection
sensor / system illumination unit, 1 m
E3M121
MCI cable, connection
sensor / system illumination unit, 2 m
E3M122
Type Description Order
no.
M12 socket, voltage supply system
illumination unit, 2 m,
PUR cable, 4 poles
E3M131
M12 socket, voltage supply system
illumination unit, 10 m,
PUR cable, 4 poles
E3M133
Ethernet, cross-over patch cable,
2 m, PVC cable, M12 / RJ45
E11898
Ethernet, cross-over patch cable,
10 m, PVC cable, M12 / RJ45
E12204
Type of sensor Resolution
pixels
[pixel]
IlluminationAngle of aperture
horizontal x vertical
[°]
Order
no.
PMD 3D sensor · Type O3M · M12 connector
PMD 3D chip 64 x 16
ext. illumination
required (O3M950)
70 x 23 O3M151
Max.
sampling rate
[Hz]
25/33/50
PMD 3D chip 64 x 16
ext. illumination
required (O3M960)
95 x 32 O3M16125/33/50
33. 34
True 3D vision sensor
Mobile 3D sensors O3M
The 3D detection of scenes and objects, already a
standard on the factory floor, is ready for mobile
machines. Apart from new possibilities for vehicle
automation (AGV, automatic guided vehicles) this
results in new assistance functions for automation tasks.
Besides position data at pixel level the respective
distance to the sensor system or an adjustable reference
point (world coordinate system) is provided. Thanks to
the permanent output of the entire 3D information via
Ethernet UDP optimum conditions for customer-specific
application solutions are provided to system integrators.
Support for system integrators with
data output via Ethernet UDP
Patented pmd time-of-flight technology
for quick distance detection
Optimised for reliable outdoor use
Robust design with IP 67 and IP 69K
Angle of aperture up to 95°
3D sensors for mobile machines
Industrial imaging
34. 35
(04.2016)
Camera systems for
mobile machines
Further technical data
O3M150, O3M160
Housing material diecast aluminium
Device connection M12 connector
Protection rating,
protection class
IP 67 / IP 69K,
III
Operating voltage [V DC] 9...32
Functions and advantages
Powerful 3D time-of-flight measurement (ToF)
The principle of these 3D sensors is based on ifm’s
patented and award-winning pmd technology.
It was specifically designed for outdoor use and difficult
ambient light situations. Interference such as sunlight
or materials with different reflective characteristics
which occurs in the area of mobile machines does not
influence the repeatability of the measured data.
Powerful electronics
The integrated 2 x 32-bit processor architecture ensures
a rapid and reliable calculation of the distance image to
be output with up to 50 fps. The complete electronics
of the mobile 3D sensor is optimised and adapted to the
demands and requirements of mobile machines.
Besides shock and vibration resistance self-diagnostic
functions from the sensor to the IR system illumination
unit are of course also available.
High system uptime
The system has various features to ensure uninterrupted
operation. They include, among others, soiling indication
as well as different status information which can be
fetched from CAN.
System parameter setting and monitoring
The parameter setting of the system and live monitoring
of the 3D data are carried out via the easy-to-use ifm
vision wizard for Windows.
Communication interfaces
The mobile 3D sensors feature a fast Ethernet interface
(100 Mbit) as well as a CAN interface. The data output
of the complete 3D information is carried out via
Ethernet UDP and can be processed using a process
unit at the customer’s end. For this version the CAN in-
terface is only intended for parameter setting and
status output.
Current consumption sensor [mA] < 400
Current consumption [A]
system illumination unit
< 5
Ambient temperature [°C] -40...85
Interfaces
1x CAN,
1 x fast Ethernet
For further technical details please visit: www.ifm.com
Industrial imaging
Connection technology
MCI cable, connection
sensor / system illumination unit, 1 m
E3M121
MCI cable, connection
sensor / system illumination unit, 2 m
E3M122
Type Description Order
no.
M12 socket, voltage supply system
illumination unit, 2 m,
PUR cable, 4 poles
E3M131
M12 socket, voltage supply system
illumination unit, 10 m,
PUR cable, 4 poles
E3M133
Ethernet, cross-over patch cable,
2 m, PVC cable, M12 / RJ45
E11898
Ethernet, cross-over patch cable,
10 m, PVC cable, M12 / RJ45
E12204
Type of sensor Resolution
pixels
[pixel]
IlluminationAngle of aperture
horizontal x vertical
[°]
Order
no.
PMD 3D sensor · Type O3M · M12 connector
PMD 3D chip 64 x 16
ext. illumination
required (O3M950)
70 x 23 O3M150
Max.
sampling rate
[Hz]
25/33/50
PMD 3D chip 64 x 16
ext. illumination
required (O3M960)
95 x 32 O3M16025/33/50
Description Order
no.
IR system illumination unit (850 nm) for mobile
3D sensors, angle of aperture 70 x 23
O3M950
IR system illumination unit (850 nm) for mobile
3D sensors, angle of aperture 95 x 32
O3M960
Accessories
Supported CAN protocols CANopen, SAE J 1939
Standards and tests
(extract)
CE,
E1 (UN-ECE R10)
CAN/RS232 USB interface CANfox EC2112
Adapter cable set for CANfox EC2114
Operating software for vision sensors E3D300
U-shaped holder,
suitable for sensor or illumination unit
E3M100
35. 36
Innovative operating concepts
for intuitive handling
Incomplete shipments – never again
If a pallet with only one incomplete handling unit
reaches the customer, he often returns all goods.
This does not only lead to dissatisfaction but also to
additional costs. Completeness monitoring provides the
remedy. Often individual sensors are installed above
each individual handling unit position. This is, however,
not very flexible if the handling unit type or size changes.
Then changes become necessary. If colour or texture of
the handling units change, conventional sensors reach
their limits.
All these problems are unknown to completeness
monitoring on the basis of 3D sensors: The 3D sensor
looks at the handling unit from above and compares
it with the models taught in by the user. It signals any
deviation via a switching output.
Continuous exchange with users and extensive hand-
ling tests have lead to extraordinarily simple operation
and integrability of the sensor.
Different handling units can be taught
Reliable detection of underfill or overfill
Automatic position tracking
Colour-independent and extraneous-light
resistant due to time-of-flight technology
(PMD).
Switching outputs and Ethernet process
data interface
Completeness monitoring for the
packaging technology
Industrial imaging
36. 37
(11.2015)
3D sensors
Further technical data
Operating voltage [V DC] 20.4...28.8
Current consumption [mA]
< 2400 peak current
pulsed;
typ. mean value
420
Current rating [mA]
(per switching output)
100
Real chip resolution
25,000 /
100,000
Resulting resolution
176 x 132
pixels
Function display LED
2 x yellow,
2 x green
Illumination
850 nm,
infrared
Ambient light [lux]
Max. 10,000
(indoor)
Trigger
External;
24 V PNP/NPN
according to
IEC 61131-2 type 3
Switching inputs
2
(configurable),
24 V PNP/NPN
according to
IEC 61131-2 type 3
Switching outputs
3
(configurable),
24 V PNP/NPN,
according to
IEC 61131-2
Ambient temperature [°C] -10...50
For further technical details please visit: www.ifm.com
Industrial imaging
Type of sensor Material
front pane /
LED window
Angle of aperture
[°]
Protection rating,
protection class
Order
no.
PMD 3D sensors · Type O3D · M12 connector
PMD 3D ToF chip
Gorilla glass /
polyamide
Material
housing
Aluminium 40 x 30
IP 65 / IP 67,
III
O3D300
Max.
field of view size
[m]
2.61 x 3.47
PMD 3D ToF chip
Gorilla glass /
polyamide
Aluminium 60 x 45
IP 65 / IP 67,
III
O3D3023.75 x 5.00
PMD 3D ToF chip
Polycarbonate /
polyamide
Stainless steel 40 x 30
IP 66 / IP 67,
III
O3D3102.61 x 3.47
PMD 3D ToF chip
Polycarbonate /
polyamide
Stainless steel 60 x 45
IP 66 / IP 67,
III
O3D3123.75 x 5.00
Short-circuit protection, pulsed •
Overload protection •
Parameter setting interface
Ethernet
10 Base-T /100 Base-TX
Possible parameter settings
Via PC /
notebook
Dimensions (H, W, D) [mm] 72 x 65 x 85
Technical data
Completeness monitoring
Operating distance [m] 0.3...5
Max. handling unit size 64 objects
Sampling rate / [Hz]
switching frequency
The image repetition frequency is
reduced by using the position tracking
function
10
Minimum size of objects [mm]
Object speed: 0...0.2 m/s
Object speed: > 0.2 m/s
25
45
Ethernet, cross-over patch cable,
2 m, PVC cable, M12 / RJ45
Ethernet jumper,
2 m, PVC cable, M12 / M12
Socket, M12,
2 m black, PUR cable, 8 poles
Type Description Order
no.
Mounting set for O3D E3D301
Accessories
E11898
E21138
E11950
Cooling element E3D302
Double cooling element E3D304
Heat conductor E3D303
Mounting accessories
Connection technology
37. 38
Flexible and universal use for
stationary or moving objects
The revolution in intralogistics
Whether pallets, post room, storage building, logistics
or distribution centre: The storage volume that can be
used defines the capacity and the costs.
A good reason to ensure the best-possible use of the
space requirement during feeding.
The new 3D sensor detects the dimensions of the
goods via innovative time-of-flight technology. It signals
via threshold values if e.g. package parameters are out-
side the defined areas.
For automated storage space planning via WMS
(Warehouse Management System) or ERP system
(Enterprise Resource Planning) it provides the size, ori-
entation and position of the objects. The data is also
used for controlling robots, sorting equipment and
distribution gates. Besides robustness the sensor is
also distinguished by user-friendly handling and simple
integration.
Non-contact dimensioning of
rectangular objects such as cardboard
packages or parcels
Determination and comparison of
dimensions, orientation and position
Provides height, width and length to
calculate strap length and volume
Quality parameters help with the
detection of damaged or deformed objects
Switching outputs and Ethernet process
data interface
Volume determination for
storage and conveyor technology
Industrial imaging
38. 39
(11.2015)
3D sensors
Further technical data
For further technical details please visit: www.ifm.com
Industrial imaging
Ethernet, cross-over patch cable,
2 m, PVC cable, M12 / RJ45
Ethernet jumper,
2 m, PVC cable, M12 / M12
Type of sensor Material
front pane /
LED window
Angle of aperture
[°]
Protection rating,
protection class
Order
no.
PMD 3D sensors · Type O3D · M12 connector
PMD 3D ToF chip
Gorilla glass /
polyamide
Material
housing
Aluminium 40 x 30
IP 65 / IP 67,
III
O3D300
Max.
field of view size
[m]
2.61 x 3.47
PMD 3D ToF chip
Gorilla glass /
polyamide
Aluminium 60 x 45
IP 65 / IP 67,
III
O3D3023.75 x 5.00
PMD 3D ToF chip
Polycarbonate /
polyamide
Stainless steel 40 x 30
IP 66 / IP 67,
III
O3D3102.61 x 3.47
PMD 3D ToF chip
Polycarbonate /
polyamide
Stainless steel 60 x 45
IP 66 / IP 67,
III
O3D3123.75 x 5.00
Socket, M12,
2 m black, PUR cable, 8 poles
Type Description Order
no.
Technical data
Dimensioning of the object
Operating distance [m] 0.3...5
Object type Rectangular
Min. object size [mm] 100 x 100 x 100
Typical accuracy [°]
for angle of rotation
± 1
Sampling rate / switching frequency [Hz] 1
Typical accuracy [mm]
for object position
± 5
Object speed [m/s] < 0.2
Typical accuracy [mm]
for object size
± 10
Operating voltage [V DC] 20.4...28.8
Current consumption [mA]
< 2400 peak current
pulsed;
typ. mean value
420
Current rating [mA]
(per switching output)
100
Real chip resolution
25,000 /
100,000
Resulting resolution
176 x 132
pixels
Function display LED
2 x yellow,
2 x green
Illumination
850 nm,
infrared
Ambient light [lux]
Max. 10,000
(indoor)
Trigger
External;
24 V PNP/NPN
according to
IEC 61131-2 type 3
Switching inputs
2
(configurable),
24 V PNP/NPN
according to
IEC 61131-2 type 3
Switching outputs
3
(configurable),
24 V PNP/NPN,
according to
IEC 61131-2
Ambient temperature [°C] -10...50
Short-circuit protection, pulsed •
Overload protection •
Parameter setting interface
Ethernet
10 Base-T /100 Base-TX
Possible parameter settings
Via PC /
notebook
Dimensions (H, W, D) [mm] 72 x 65 x 85
Mounting set for O3D E3D301
Accessories
E11898
E21138
E11950
Cooling element E3D302
Double cooling element E3D304
Heat conductor E3D303
Mounting accessories
Connection technology
39. 40
Three-dimensional real-time
detection of any scene
Perspective and colour-coded images of the 3D
distance image.
Three-dimensional detection and evaluation
The 3D camera, on the basis of PMD technology, detects
scenes and objects at a glance in three dimensions.
In contrast to laser scanners it does not require moving
components and is thus robust and wear-free.
The function principle, the time of flight technology
(ToF), can be compared to a laser scanner. However,
instead of one there are 23,000 receiving elements
arranged on the chip as a matrix. That means that not
only one point but a complete scene is measured in
only one capture. Besides the distance image the
camera also provides a grey-scale image of the scene.
Intuitive parameter setting software allows easy setting
of the camera-specific parameters. Furthermore a soft-
ware development kit with example program code in
different languages is available.
New digital image chip with 23,000 pixels
Provides distance image and
grey-scale image
Evaluation with common image
processing libraries
Industrially compatible housing
Connection to MATLAB, HALCON, PCL
(Point Cloud Library) and ROS (Robot
Operating System)
High-resolution 3D camera for
innovative vision integration
Industrial imaging
40. 41
(11.2015)
3D cameras
Further technical data
Operating voltage [V DC] 24
Current consumption [mA] < 1000 (max. 2500)
Current rating [mA]
(per switching output)
100
Range [m] Typically 5
Unambiguous range [m] 0...30
Sampling rate / [Hz]
switching frequency
Max. 20,
adjustable
Resolution
176 x 132
pixels
Function display LED
2 x yellow,
2 x green
Illumination
850 nm,
infrared
Ambient light [lux]
Max. 10,000
(indoor)
Trigger
Internal or external:
24 V PNP / NPN selectable,
according to
IEC 61131-2 type 2
Switching inputs
Max: 2 (configurable),
24 V PNP / NPN selectable,
according to
IEC 61131-2 type 2
Switching outputs
Max: 2 (configurable),
24 V PNP / NPN selectable
or 1 analogue output (con-
figurable) scalable, 4...20
mA according to
IEC 61131-2,
max. load 300 Ω,
0...10 V according to
IEC 61131-2,
min. load 10 kΩ
Ambient temperature [°C] -10...50
For further technical details please visit: www.ifm.com
Industrial imaging
PMD 3D camera · Type O3D · M12 connector
Socket, M12,
2 m black, PUR cable, 5 poles
EVC070
socket, M12,
5 m black, PUR cable, 5 poles
EVC071
Short-circuit protection •
Overload protection •
Parameter setting interface
Ethernet
10 Base-T /100 Base-TX
Possible parameter settings
Via PC /
notebook
Type of sensor Material
front pane /
LED window
Angle of
aperture
[°]
Protection rating,
protection class
Order
no.
Infineon® 3D
Image Sensor
Gorilla glass /
polyamide
Material
housing
Aluminium 40 x 30
IP65 / IP67,
III
O3D301
Max.
field of view size
[mm]
2.61 x 3.47
Infineon® 3D
Image Sensor
Gorilla glass /
polyamide
Aluminium 60 x 45
IP65 / IP67,
III
O3D3033.75 x 5.00
Infineon® 3D
Image Sensor
Polycarbonate /
polyamide
Stainless steel 40 x 30
IP66 / IP67,
III
O3D3112.61 x 3.47
Infineon® 3D
Image Sensor
Polycarbonate /
polyamide
Stainless steel 60 x 45
IP66 / IP67,
III
O3D3133.75 x 5.00
Ethernet, cross-over patch cable,
2 m, PVC cable, M12 / RJ45
Ethernet jumper,
2 m, PVC cable, M12 / M12
Type Description Order
no.
Mounting set for O3D E3D301
Accessories
E11898
E21138
Cooling element E3D302
Double cooling element E3D304
Heat conductor E3D303
Mounting accessories
Connection technology
41. 42
Pressure transmitters with M12,
AMP or DEUTSCH connector
for mobile applications
Miniaturisation for mobile applications
The connectors of the new PT/PU pressure sensors
allow fast and easy installation in mobile machines.
The sensors also feature a thin-film measuring cell
directly welded with the process connection.
This technology guarantees high accuracy in a very
compact housing with only 19 mm across flats at a
cost-optimised price/performance ratio.
Applications
The PT/PU type sensors are suited for mobile applica-
tions and especially for hydraulic and pneumatic appli-
cations with high operating pressure.
The high vibration and shock resistance, the high
protection rating, the excellent EMC resistance and the
E1 conformity make the PT/PU sensors particularly
suitable for use in mobile machines.
Compact design (AF19) with
process connection G 1/4 male
Fast reaction:
2 milliseconds response time
Measuring accuracy < ± 0.8 %,
repeatability < ± 0.05 %
Easy connection via
DEUTSCH, AMP or M12 connector
Robust low-cost solution with
welded stainless steel housing
Small and cost-optimised for
mobile machines
Process sensors
42. 43
(04.2016)
Pressure sensors
Accessories
Type Description Order
no.
Operating voltage PT [V DC]
PU [V DC]
8...32
16...32
Common technical data
Medium temperature [°C] -40...125
Materials wetted parts
1.4542 (17-4 PH / 630),
characteristics similar to
stainless steel
(e.g. 304/1.4301)
but higher strength
Protection IP 67 / IP 69K
Step response time [ms] 2
Restrictor •
EMC
Compliant with UN-ECE10
Rev. 4
ISO 11452: 100 V/m
EN61326
Reverse polarity protection •
Adapters; G 1/4 - G 1/2,
high-grade stainless steel (316Ti/1.4571)
E30135
For further technical details please visit: www.ifm.com
Process sensors
Accuracy / deviation
(in % of the span)
Linearity error
Linearity
Hysteresis
Repeatability
Long-term stability
Temperature coefficients (TEMPCO)
in the temperature range 0 ... 80 °C
(in % of the span per 10 K)
TEMPCO of zero
TEMPCO of the span
Temperature coefficients (TEMPCO)
in the temperature ranges
-40...0 °C and 80...125 °C
(in % of the span per 10 K)
TEMPCO of zero
TEMPCO of the span
< ± 0.8
< ± 0.25 BFSL / < ± 0.5 LS
< ± 0.2
< ± 0.05
< ± 0.1
< ± 0.1
< ± 0.1
< ± 0.2
< ± 0.2
Wiring diagram
Dimensions
12
65,9
51,6
M12x1
18,9
G
1 4
/
19
1
Example: type PT55
1) HNBR seal / DIN 3869
PU5704
PU5703
PU5702
PU5701
PU5700
PU5760
PU5604
PU5603
PU5602
PU5601
PU5600
PU5660
Measuring range
relative pressure
[bar]
Poverload
max.
[bar]
Pburst
min.
[bar]
Output function 4…20 mA,
0...10 25 300
0...25 65 600
0...100 250 1000 PT5702
0...250 625 1200 PT5701
0...400 1000 1700 PT5700
0...600 1500 2400 PT5760
Output function 0...10 V
0...10 300
0...25 600
0...100 1000
PT5602
0...250 1200
PT5601
0...400 1700
PT5600
0...600 2400
PT5660
PT5502
PT5501
PT5500
PT5560
25
65
250
625
1000
1500
Order
no.
PT5504
M12 connector
PT5503
Order
no.
PT5604
AMP connector
PT5603
Order
no.
PT5704
DEUTSCH connector
M12 connector AMP connector DEUTSCH connector
PT5703
L+
BN1
WH2
OUT
Type PT55
1
2
3
OUT
L +
L -
Type PU56
A
B
OUT
+L
A
C
B
OUT
L -
L +L +
Type PU57Type PT57
1
3
L +
OUT
Type PT56
–
–
–
–
–
–
43. 44
Process sensors
High-grade stainless steel
submersible pressure transmit-
ter of different cable materials
Level measurement in a water treatment plant
Application areas
The PS series submersible pressure transmitters are
used for level measurement in containers, tanks, wells,
flowing water, bore holes and wastewater plants. The
accuracy of 0.5 % and the long-term stability of 0.2 %
per year contribute to the reliable operation of the
transmitter.
Robust, reliable and flexible
All submersible pressure transmitters have a robust
high-grade stainless steel housing. For standard applica-
tions the favourably priced PUR cable can be used.
For applications where a high resistance to media is
requested (e.g. slurry, oils or fuels) the FEP cable is
available.
The ATEX submersible pressure transmitters of the
PS3xxA series are designed for level measurement in
areas subject to explosion. The sensors can be used in
zone 0, 1, 2 or zone 20, 21, 22 as well as in mining.
The GL approval allows an application in the maritime
sector.
PUR or FEP cable for high resistance
to media
Version with ATEX approval for group I
cat. M1 and group II cat. 1G and 1D.
Good overall accuracy and long-term
stability
Pressure compensation via internally
vented cable
Hydrostatic level measurement
for a wide range of applications
44. 45
(04.2016)
Process sensors
For further technical details please visit: www.ifm.com
Pressure sensors
Splitter box *
with vent and terminal block
E30401
Additional weight, approx. 500 g E30402
Filter element * E30400
Cable fixing clamps * E30399
Submersible pressure transmitters with PUR cable for standard applications
0.6
0.6
0.6
4
4
4
1000 N
1000 N
1000 N
Measuring range
Relative pressure
[bar]
Approvals
CE / EX / GL
Overload pressure
[bar]
Pull force cable
1
1
5
5
1000 N
1000 N
Cable length
[m]
PS3407
PS3427
PS3607
Order
no.
PS3417
PS3617
0.25 2 1000 N
10
15
30
15
30
5
• / – / –
• / – / –
• / – / –
• / – / –
• / – / –
• / – / – PS3208
Operating voltage [V DC] 18...30
Analogue output [mA] 4...20
Accuracy / deviation
(in % of the span)
Accuracy (BFSL)
Accuracy incl. non-linearity
Non-linearity (BFSL)
Long-term stability per year
≤ 0.25 (PS3: 0.5)
≤ 0.5 (PS3: 1)
≤ 0.2
≤ 0.2
Design PS3
Ambient temperature / [°C]
Medium temperature
-10...50
Design PS4
Ambient temperature / [°C]
Medium temperature
-10...85
Design PS3
ATEX approval
Ambient temperature / [°C]
Medium temperature
1G, 1/2G, 2G:
T6 -10...60, T5: -10...80,
T4: -10...85
1D, 1/2D, 2D:
-10...40 (750 mW) / -
10...70 (650 mW) / -
10...85 (550 mW)
Housing material
High-grade stainless steel
(316Ti / 1.4571)
Further technical data
Accessories
Type Description Order
no.
* use only outside the hazardous area
Submersible pressure transmitters with FEP cable for high resistance to media
0.6
1
3
5
500 N
500 N
PS4407
PS4417
0.25 2 500 N
10
15
5
• / – / –
• / – / –
• / – / – PS4208
Submersible pressure transmitters with FEP cable for hazardous areas
0.6
1
4
5
500 N
500 N
PS307A
PS317A
0.25 2 500 N
10
15
5
• / • / •
• / • / •
• / • / • PS308A
Temperature coefficients (TEMPCO)
(in % of the span per 10 K)
Greatest TEMPCO of zero
Greatest TEMPCO of the span
≤ 0.2
≤ 0.2
100
27
Example PS3208
Dimensions
0.6
1
3
5
500 N
500 N
PS4506
PS4607
0.25 2 500 N
20
30
10
• / – / –
• / – / –
• / – / – PS4408
45. 46
New PT absolute pressure
transmitter with different
measuring ranges
Absolute pressure sensors
As of now, ifm has added absolute pressure sensors to
its versatile portfolio in the pressure sensor range.
The new PT05 series with robust metal measuring cell,
G 1/4 process connection, M12 connector and analogue
output is available in the common pressure ranges up
to 10 bar.
Operating principle
Absolute pressure sensors operate independently of the
surrounding air pressure; that is what distinguishes
them from sensors working on a relative measurement
principle. The measurement is not influenced by weather-
and altitude-related fluctuations of air pressure. This is
often a decisive factor in vacuum applications, which
require a fine pressure control.
Absolute pressure sensors do not require ventilation,
therefore incorrect measurement due to a blocked
exhaust is impossible.
In the field of pressure sensors the new units stand out
as specialists for ”specific duties“.
Measuring range 0...1/1,6/4/10 bar
absolute and analogue output 4...20 mA
Robust stainless steel measuring cell
Slim, compact design with G 1/4 process
connection
Measuring accuracy ≤ 0.8 %,
repeatability ≤ 0.1 %
Easy connection via M12 connector
From now on,
measure pressure absolutely!
Process sensors
46. 47
(04.2016)
Pressure sensors
Accessories
Type Description Order
no.
Operating voltage [V DC] 8...30
Common technical data
Medium temperature [°C] 0...80
Materials (wetted parts)
NBR,
high-grade stainless steel
(316L/1.4404)
Protection IP 67
Step response time [ms] 4
Reverse polarity protection •
Adapter; G 1/4 - G 1/2,
high-grade stainless steel (316Ti/1.4571)
E30135
For further technical details please visit: www.ifm.com
Process sensors
Measuring range
[bar]
Poverload
max.
[bar]
Pburst
min.
[bar]
Order
no.
Output function 4...20 mA
0...1 5 PT0507
0...1.6 10 PT0517
0...4 25 PT0505
0...10 50 PT0504
Accuracy / deviation
(in % of the span)
Linearity error
Linearity
Repeatability
Temperature error in the
temperature range 0...80 °C
< ± 1.0
< ± 0.5 BFSL / < ± 1.0 LS
< ± 0.1
< ± 2.5 %
Connection technology
Type Description Order
no.
M12 socket,
2 m black, PUR cable
EVC001
M12 socket,
5 m black, PUR cable
EVC002
M12 socket,
2 m black, PUR cable
EVC004
M12 socket,
5 m black, PUR cable
EVC005
L+
BN1
WH2
OUT
Wiring diagram
Dimensions
14
47
58,8
G¼
29
M12x1
27
1
1) Sealing
2
3.2
8
20
47. 48
More plant transparency and
service information on site
More plant transparency
The IO-Link display is a flexible solution to display process
values, texts and messages in a plant. It displays up to
four assigned process values, alarms and warnings.
Clear text and as an option a colour change of text and
background can be used for a quick overview.
By means of buttons the user can trigger control actions
of the PLC or acknowledge messages.
Easy integration
The IO-Link display is connected to an IO-Link master
and controlled via PLC. No special software is required
for configuration.
Texts and settings can be predetermined via an IO-Link
device tool such as LINERECORDER SENSOR. Texts and
settings can be adapted even during operation via the
PLC.
Four measured values / text displays and
four message windows for free text
Colour change for text and background
Flexible adaptation of the display, also
during operation
IO-Link 1.1 compatible
Easy integration into each IO-Link
structure
IO-Link display:
process values at a glance
Process sensors
48. 49
(11.2015)
IO-Link display
For further technical details please visit: www.ifm.com
Process sensors
Resolution
pixels
Display type Display
illumination
Order
no.
1.44“ colour display
128 x 128 TFT LED E30391
Wiring
Dimensions
Technical data
IO-Link display
E30391
Operating voltage [V DC] 18...30
Current consumption [mA] < 47
Protection rating /
protection class
IP 65, IP 67 /
III
Reverse polarity protection •
Ambient temperature [°C] 0...60
EMC
EN 61000-6-2
EN 61000-6-4
Shock resistance [g] 20 (11 ms)
Vibration resistance [g] 20 (10...50 Hz)
Housing materials
Stainless steel
(303/1.4305);
PC; PBT-GF 30;
PPS; PA 6.6; FKM
Connection M12 connector
Communication interface
IO-Link device
Type of transmission
IO-Link revision
SDCI standard
COM2 (38.4 kbaud)
1.1
IEC 61131-9
Connection technology
Type Description Order
no.
M12 jumper
1 m black, PUR cable
EVC042
M12 jumper
2 m black, PUR cable
EVC043
M12 jumper,
3 m black, PUR cable
EVC102
M12 jumper,
5 m black, PUR cable
EVC044
M12 jumper,
10 m black, PUR cable
EVC493
BN1
BK4
BU3
L+
L
OUT
45
34
86
101
39,5
11
M12x1
49. 50
Calorimetric flow meter for
liquids and gases
Measurement technique
The SA volumetric flow sensor operates using the
calorimetric measuring principle. Measuring elements
as well as a heat source are located on the measuring
tip. The physical effect that a flowing medium absorbs
heat energy and conducts it away is used. The resulting
temperature change is an indication of flow.
Device function
The new SA-type sensor has been designed to detect
and measure flow and temperature even in large internal
pipe diameters up to 400 mm.
A serial number on the device enables unambiguous
traceability.
Therefore it serves different applications. Switching
outputs, analogue signals and IO-Link provide various
options to further process the signals. That means that
the user is best-equipped for Industry 4.0.
Optimised for water, oils, glycol and air
Fast response time and integrated
temperature measurement
Red/green colour change for process
values
Internal pipe diameter selectable from
15...400 mm
The process connection can be rotated for
optimum alignment
New benchmark in thermal flow
measurement
Process sensors
50. 51
(11.2015)
Flow sensors / flow meters
For further technical details please visit: www.ifm.com
Common technical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 100
Current rating [mA] 250
Housing materials
High grade stainless steel
(1.4404/316L);
PBT-GF 20;
PBT-GF 30
Connection M12 connector
Accuracy temperature measurement ± 0.3 K
Type
SA
Protection rating, protection class IP 65 / IP 67, III
BN
WH
BK
BU
4
1
3
2
OUT2
L+
L
OUT1
Wiring
Measuring range
liquid / gaseous
[cm/s]
Medium
temperature
[°C]
Response
time
[s]
Order
no.
M12 connector · electrical design DC PNP
5...300 / 200...10000 -20...90 0.5 SA5000
Probe length
[mm]
45
5...300 / 200...10000 -20...100 0.5 SA4100100
5...300 / 200...10000 -20...100 0.5 SA4300200
Pressure
resistance
[bar]
100
50
50
Process sensors
Type
M18
Progressive ring
Progressive ring
Connection technology
Type Description Order
no.
M12 socket,
2 m black, PUR cable
EVC001
M12 socket,
5 m black, PUR cable
EVC002
M12 socket,
2 m black, PUR cable
EVC004
M12 socket,
5 m black, PUR cable
EVC005
M12 socket,
2 m orange, PVC cable
EVT064
M12 socket,
5 m orange, PVC cable
EVT001
Accuracy flow measurement
± (5 % MW
+ 2 % VMR)
at reference
conditions
Accessories
Type Description Order
no.
Progressive ring fitting G 1/2,
flat seal
E40258
Progressive ring fitting G 1/4,
flat seal
E40259
Progressive ring fitting G 3/4,
flat seal
E40260
USB IO-Link master for parameter setting
and analysis of units
Supported communication protocols:
IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
Progressive ring fitting 1/2 NPT E40261
Progressive ring fitting 1/4 NPT E40262
Progressive ring fitting R 1/2 E40263
Progressive ring fitting R 1/4 E40264
Progressive ring fitting
for SL mounting adapter
E40269
Protective cover for fluid sensors with
M12 connector,
polypropylene homopolymer
E30420
Welding adapter for cutting ring E40265
51. 52
Compact mechatronic inline
flow meter with backflow
prevention
Mechatronic flow sensor
The new mechatronic flow sensor of the SBY series
functions using the principle of a spring-mounted piston.
The piston, located in the valve seat in the housing,
is lifted by the flowing medium against the spring
resistance.
For binary signal output the piston position is detected
by an inductive sensor. The spring resistance leads to
reliable reset of the piston to its initial position with
decreasing flow. This ensures position-independent
installation of the flow sensor preventing backflow.
The switch points can be easily set and fixed via a
setting screw. The robust mechanical design ensures
use in harsh environments.
The units are maintenance-free.
Measuring range from 0.2...4 l/min
Compact design
Very fast response time of ≤ 10 ms
No inlet and outlet pipe lengths required
Independent of pressure and temperature
fluctuations
New flow sensor now also for
smallest quantities
Process sensors
52. 53
(11.2015)
Flow sensors / flow meters
For further technical details please visit: www.ifm.com
Current consumption [mA] < 15
Ambient temperature [°C] 0...60
Protection rating, protection class IP 65 / IP 67, III
Housing materials
Brass
chemically nickel-plated;
anodised aluminium;
PA
Materials in contact
with the medium
High-grade stainless steel
(301/1.4310);
high-grade stainless steel
(316/1.4401);
PBT; brass chemically
nickel-plated; PPS;
O-ring: FKM Polyolefin
Short-circuit protection •
Further technical data
Overload protection •
L+
L
BN1
4 BK
3 BU
Wiring
Process
connection
Pressure
resistance
[bar]
Measuring range
[l/min]
Response time
[ms]
Order
no.
M12 connector · electrical design DC PNP
Rp 1/2 800.2...4 ≤ 10 SBY321
Operating voltage
[V]
24 DC
Type
Connection technology
Type Description Order
no.
M12 socket,
2 m black, PUR cable
EVC001
M12 socket,
5 m black, PUR cable
EVC002
M12 socket,
2 m black, PUR cable
EVC004
M12 socket,
5 m black, PUR cable
EVC005
M12 socket,
2 m orange, PVC cable
EVT064
M12 socket,
5 m orange, PVC cable
EVT001
Process sensors
Connection M12 connector
M12
94...99
27
Rp½
Rp½
66,5
18
107...113
13 13
Dimensions
53. 54
Reliable level detection – LMT
Level detection in explosive atmospheres
LMT sensors reliably detect levels in storage tanks in
explosive areas. They can be used in zones 2 and 22.
Food-grade
The sensor with its high-quality housing materials such
as high-grade stainless steel (316L / 1.4404) and PEEK
meets all requirements for hygienic areas. This includes
approvals such as EHEDG and FDA.
Versatile sensor for all media
The LMT can be adjusted to almost all liquid and
viscous media as well as powders.
The distinction between two media in the same applica-
tion is possible due to the two switching outputs which
can be set independently. Convenient parameter setting
is made via IO-Link.
Approved for ATEX areas of category
3D/3G
“Plug & Play“ – factory preset to oil-based
media
Can be set to other media such as alcohol
using IO-Link
Hygienic design with maintenance-free
sealing concept
Shock and vibration resistant in a robust
stainless steel housing
Hygienic point level sensor
especially for hazardous areas
Process sensors
54. 55
(11.2015)
Level sensors
Process
connection
Installation
length
[mm]
Approval Protection
[hazardous areas]*
Order
no.
Application: liquids, viscous media and powders
M12 connection · output function 2 x NO/NC programmable · 4-wire DC PNP · IO-Link 1.1
Medium temperature
oils, oil-based media,
powder
G 1/2 12 EHEDG, FDA -20...85 °C IP 67 / III LMT01A
G 1/2 153 EHEDG, FDA -20...85 °C IP 67 / III LMT03A
G 1/2 253 EHEDG, FDA -20...85 °C IP 67 / III LMT04A
Accessories
Type Description
High-grade stainless steel
Order
no.
Current rating [mA] 100
Housing materials
high-grade stainless steel
(1.4404 / 316L),
(1.4571 / 316Ti),
PEEK; PEI; FKM
Materials in contact
with the medium
high-grade stainless steel
(1.4404 / 316L),
(1.4571 / 316Ti),
PEEK; FKM
Shock resistance [g] 50
Vibration resistance [g]
(LMT03A, LMT04A)
8
Vibration resistance [g]
(LMT01A)
20
Ambient temperature [°C] -20...60
EMC (LMT03A, LMT04A)
Closed tanks
EN 61000-6-2
EN 61000-6-4
EMC (LMT01A)
Open tanks
Closed tanks
EN 61000-6-2
EN 61000-6-4
EN 61000-6-3
Operating voltage [V] 18...30 DC
Current consumption [mA] < 50
Further technical data
Clamp adapter
G 1/2 female – Clamp 1“–1.5“
E33401
Clamp adapter
G 1/2 female – Clamp 2“
E33402
Welding adapter ball, G 1/2 E30055
Welding adapter collar, G 1/2 E30056
Welding adapter,
cylindrical, for tanks, G 1/2
E43300
Welding adapter,
cylindrical, for pipes, G 1/2
E43301
Screw-in adapter
G1/2 female – G 3/4 male
E43302
Screw-in adapter
G1/2 female – G 1 male
E43303
Screw-in adapter
G1/2 female – 3/4 NPT
E43313
Clamp adapter,
G 1/2 female – Varivent D50
E43306
Clamp adapter,
G 1/2 female – Varivent D68
E43307
Accessories
Type Description Order
no.
IO-Link interface for parameter setting
and analysis of units with
DTM specification, current consumption
from USB port: max. 500 mA
E30396
Memory plug, parameter memory
for IO-Link sensors
E30398
T-piece, DN 25 E43316
T-piece, DN 40 E43317
T-piece, DN 50 E43318
For further technical details please visit: www.ifm.com
Welding adapter, long design
for deeper installation, G 1/2
E43319
Process sensors
ATEX approval
group II,
category 3D / 3G
Communication interface IO-Link 1.1
Connection M12 connector
LINERECORDER SENSOR,
Software for parameter setting and
setting up IO-Link sensors
QA0001
USB IO-Link master for parameter setting
and analysis of units
Supported communication protocols:
IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
*IP 68, IP 69K outside the hazardous area
Connection technology
Type Description Order
no.
Socket, M12,
2 m black, PUR cable
EVC04A
Socket, M12,
5 m black, PUR cable
EVC05A
Socket, M12,
10 m black, PUR cable
EVC06A
55. 56
LR level sensor in a
new design with
extended functions
Application
Harsh environment conditions or high temperatures
leave the LR2050 cold. Installation in confined spaces
or detection of oils using a coaxial pipe is no problem
for LR, either. LR flexibly adapts to any application
thanks to the installation adjustment and the modular
concept.
Successful thanks to modular concept
The probes can be shortened, or changed, so the LR
reduces stock-keeping and simplifies replacement.
User-friendly setting
Even before installation the user can set the sensor
parameters via pushbuttons or IO-Link on the PC.
Installation adjustment is made on site via pushbutton,
if required.
Mounting adjustment enables position-
independent installation
Medium temperature up to 100 °C
Simulation function facilitates testing of
the plant software
Automatic detection of the rod length
Probe lengths of 15...200 cm
Continuous level measurement in
harsh environments
Process sensors
56. 57
(11.2015)
Level sensors
Protection rating/
protection class
Max.
tank pressure
[bar]
-1...4 IP 68, IP 69K / III
Accessories (to be ordered separately)
Type Description Order
no.
For further technical details please visit: www.ifm.com
Process sensors
Process connection Medium temperature
[°C]
Order
no.
M12 connector · IO-Link 1.1
Output function 2 x NO / NC or 1 x NO / NC + 1 x analogue (4...20 mA; scalable)
G 3/4 -20...100 LR2050
Current consumption [mA]
Dielectric constant medium
Ambient temperature [°C]
Metals in contact
with the medium
Housing materials
Power-on delay time [s]
Operating voltage [V] 18...30 DC
Current rating [mA] 200
Further technical data
IO-Link device type of transmission
Rods high-grade stainless steel (316L / 1.4404)
Coaxial pipes stainless steel (304S15 / 1.4301)
Flange plates stainless steel (303 / 1.4305)
Application: aqueous media, coolants, cleaning agents, oils. *
Flange plate, LR 73-90 E43201
Flange plate, LR 73 - 90 / NPT E43206
Flange plate, LR 65-80 E43202
* A coaxial pipe is required for the unit to function correctly in low
dielectric media.
Accessories (to be ordered separately)
Type Description Order
no.
IO-Link interface for parameter setting
and analysis of units with
DTM specification, current consumption
from USB port: max. 500 mA
E30396
Memory plug, parameter memory
for IO-Link sensors
E30398
LINERECORDER SENSOR,
software for parameter setting and
setting up IO-Link sensors
QA0001
IO-Link accessories
Type Description Order
no.
< 50
1.8...5*
> 5
-40...80
high-grade stainless steel
(316L / 1.4404,
316S12 / 14435),
PTFE, FKM
high-grade stainless steel
(316L / 1.4404),
PEI, PBT, PTFE, FKM
≤ 3
1.1
Coaxial pipes, slotted stainless steel (304S15 / 1.4301)
700 mm E43333
1200 mm E43334
E43218450 mm
E43219700 mm
E432201000 mm
E432211600 mm
G 3/4
3/4" NPT
E43203240 mm
E43204450 mm
E43226300 mm
E43205700 mm
E43227500 mm
E432071000 mm
E432081200 mm
E432091400 mm
E432101600 mm
E43211240 mm
E43212450 mm
E43213700 mm
E432141000 mm
E432151200 mm
E432161400 mm
E432171600 mm
E43228300 mm
E43229500 mm
E43351210 mm
E43225150 mm
E43352265 mm
E433532000 mm
E43354210 mm
E43230150 mm
E43355265 mm
E433562000 mm
57. 58
LR9020 level transmitter with
ingress-resistant housing and
IO-Link parameter setting
Robust and reliable
The LR9020 reliably resists harsh environmental conditions
or high-pressure cleaning. Its small design allows installa-
tion in restricted spaces.
The digital IO-Link communication prevents disturbance
in measured value transfer.
Successful thanks to modular concept
The probes can be shortened, or changed, so the LR
reduces stock-keeping and simplifies replacement.
User-friendly setting
Even before installation the user can set the sensor
parameters via IO-Link on the PC. The data record of
parameter setting can be copied to other sensors,
e.g. for installations of identical design.
Analogue output, switching output and
process value transfer via IO-Link
User-friendly parameter setting via IO-Link
by means of PC or IO-Link master
Probe lengths of 10...160 cm
The probe can be cut to length, if needed
Small design for limited space
Continuous level measurement
with analogue output and IO-Link
Process sensors
58. 59
(11.2015)
Level sensors
For further technical details please visit: www.ifm.com
Process sensors
Applications: aqueous media, coolants, cleaning agents, oils. *
* A coaxial pipe is required for the unit to function correctly in low
dielectric media.
M12-connector
Output function 1 x IO-Link / 1 x analogue 4...20 mA / 0...10 V
Current consumption [mA] < 80
Dielectric constant medium
2...20*
> 20
Ambient temperature [°C] 0...60
Metals in contact
with the medium
high-grade stainless steel
(316S12/1.4435),
stainless steel
(303/1.4305), PTFE, NBR
Housing materials
FKM, NBR, PBT, PC, TPE-V,
stainless steel
(1.4301/304), PTFE, PEI
Power-on delay time [s] 3
Operating voltage [V] 18...30 DC
Current rating [mA] 200
Further technical data
IO-Link device type of transmission COM2 (38.4 kbaud)
LR9020-1...4 IP 69K, IIIG 3/4 0...80
Protection rating/
protection class
Max.
tank pressure
[bar]
Process connection Medium temperature
[°C]
Order
no.
Accessories (to be ordered separately)
Type Description Order
no.
Rods high-grade stainless steel (316L / 1.4404)
Coaxial pipes stainless steel (304S15 / 1.4301)
Coaxial pipes, slotted stainless steel (304S15 / 1.4301)
700 mm E43333
1200 mm E43334
E43218450 mm
E43219700 mm
E432201000 mm
E432211600 mm
G 3/4
3/4" NPT
E43203240 mm
E43204450 mm
E43226300 mm
E43205700 mm
E43227500 mm
E432071000 mm
E432081200 mm
E432091400 mm
E432101600 mm
E43211240 mm
E43212450 mm
E43213700 mm
E432141000 mm
E432151200 mm
E432161400 mm
E432171600 mm
E43228300 mm
E43229500 mm
E43351210 mm
E43225150 mm
E43352265 mm
E43354210 mm
E43230150 mm
E43355265 mm Flange plates stainless steel (303 / 1.4305)
Flange plate, LR 73-90 E43201
Flange plate, LR 73 - 90 / NPT E43206
Flange plate, LR 65-80 E43202
Accessories (to be ordered separately)
Type Description Order
no.
IO-Link interface for parameter setting
and analysis of units with
DTM specification, current consumption
from USB port: max. 500 mA
E30396
Memory plug, parameter memory
for IO-Link sensors
E30398
LINERECORDER SENSOR,
software for parameter setting and
setting up IO-Link sensors
QA0001
IO-Link accessories
Type Description Order
no.
59. 60
Improved display and
evaluation unit for
Pt100 / Pt1000 sensors
One unit for many sensors
The TR evaluation unit is a universal control and display
unit for connection of PT100 / PT1000 sensors (TT, TM
and TS series)
Automatic detection of the probe
The evaluation unit automatically detects whether two-
wire, three-wire or four-wire Pt100 or Pt1000 sensors
are connected.
Wide measuring range
Thanks to the extended measuring range of
-100...600 °C, an enormous number of common
temperature measurement and monitoring tasks in the
manufacturing and process industries can be solved.
And, of course, ifm also offers the corresponding
temperature sensors.
Clearly indicate the acceptable ranges:
programmable red/green display
Quick and easy handling via 3 pushbuttons
with VDMA menu
Visualisation of the switching states by
clearly visible LEDs
Flexible installation thanks to modular
concept
Versions with analogue (4...20 mA /0...10 V)
or switching output (2 x PNP/NPN)
Evaluates temperatures up to
600 °C: the TR with a new look
Process sensors
60. 61
(11.2015)
Temperature sensors
For further technical details please visit: www.ifm.com
Process sensors
Dimensions
64
48
M12x1
34
104
3
16,5
2
1
30
Connection technology
Type Description Order
no.
Socket, M12,
2 m black, PUR cable
EVC001
Socket, M12,
5 m black, PUR cable
EVC002
Socket, M12,
2 m black, PUR cable
EVC004
Socket, M12,
5 m black, PUR cable
EVC005
Mounting clamp, Ø 34 mm,
PBT
E10017
Mounting clamp, Ø 34 mm,
PA
E10193
Protective cover for fluid sensors with
M12 connector,
polypropylene homopolymer
E30420
Accessories
Type Description Order
no.
Response dynamics
T05 / T09
[s]
Pressure resistance
[bar]
depends on the connected sensor
Measuring range
[°C]
Factory setting
[°C]
Order
no.
Output function 1 x NO / NC programmable · 1 x analogue output 4…20 mA or 0…10 V programmable
-100...600 -40...300
Process connection
G 1/2 A TR2439
depends on the connected sensor
Output function 2 x NO / NC programmable
-100...600 -40...300 G 1/2 A TR7439
Accuracy [K] ± 0,3 + (± 0,1 % MS)
Electrical design PNP / NPN
Protection IP 67
Communication interface IO-Link
Resolution display [K] 0,1
Operating voltage [V] 18...32 DC
Current rating [mA] 250
Further technical data
IO-Link accessories
Type Description Order
no.
Temperature sensors for connection
to the TR type
Version
High-temperature cable sensor
Order
no.
2 m,
PFA / PTFE cables
TS2451
2 m,
PFA / PTFE cables
TS2452
2 m,
PFA / PTFE cables
TS2453
2 m,
PFA / PTFE cables
TS2454
IO-Link interface for parameter setting
and analysis of units with
DTM specification, current consumption
from USB port: max. 500 mA
E30396
Memory plug, parameter memory
for IO-Link sensors
E30398
LINERECORDER SENSOR,
software for parameter setting and
setting up IO-Link sensors
QA0001
USB IO-Link master for parameter setting
and analysis of units
Supported communication protocols:
IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
Installation
length
[mm]
100
150
200
250
1) LEDs (display unit / switching status)
2) 4-digit alphanumeric display / alternating indication of red and green
3) Programming buttons
61. 62
Now with integrated
process connections and
evaluation electronics
Extremely fast, robust and flexible
The compact TN type temperature sensors are
distinguished by excellent response times, high pressure
resistance and integrated process connections. The
sensors easily resist applications with temperatures up
to 150 °C and high pressure loads up to 400 bar. The
measuring range is freely scalable.
Updating a classic
What is new is the quick and easy handling via three
pushbuttons. The display can be switched from the
indication of ”red“ to an alternating indication of
“red - green“.
So, switching states can be highlighted or an independent
colour window can be created. The sensor head can
be rotated and offers optimum readability from any
position. Thanks to captive laser labelling on the stainless
steel housing, the units can still be identified after years.
Savings potential
Evaluation electronics and integrated process connecti-
ons in one unit do not require complex documentation
and save storage cost.
Measuring range of -50...150 °C,
response time T05 / T09 = 1s / 3s.
Clearly indicates the acceptable ranges:
programmable red/green display
Integrated process connections:
G 1/2, G 1/4, 1/2 NPT, 1/4 NPT, M18 x 1.5
2 switching outputs or 1 switching and 1
analogue output (4...20 mA or 0...10 V)
Visualisation of the switching states by
clearly visible LEDs
Modern classic:
new TN temperature sensor
Process sensors
62. 63
(04.2016)
Temperature sensors
For further technical details please visit: www.ifm.com
Process sensors
Adapter, M18 x 1.5 - G 1/2
High-grade stainless steel (316L/1.4404)
E40096
Protective cover for fluid sensors with
M12 connector,
polypropylene homopolymer
E30420
Accessories
Type Description Order
no.
Accuracy [K] ± 0.3 + (± 0.1 % MS)
Electrical design PNP / NPN
Protection IP 67
Communication interface IO-Link
Resolution display [K] 0.1
Operating voltage [V] 18...32 DC
Current rating [mA] 250
Further technical data
IO-Link interface for parameter setting
and analysis of units with
DTM specification, current consumption
from USB port: max. 500 mA
E30396
Memory plug, parameter memory
for IO-Link sensors
E30398
LINERECORDER SENSOR,
software for parameter setting and
setting up IO-Link sensors
QA0001
IO-Link accessories
Type Description Order
no.
USB IO-Link master for parameter setting
and analysis of units
Supported communication protocols:
IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
1) LEDs (display unit / switching status), 2) 4-digit alphanumeric
display / alternating indication of red and green, 3) Programming
buttons, 4) Upper part of the housing can be rotated by 345°
Einbaulänge
[mm]
Pressure resistance
[bar]
300 45
Measuring range
[°C]
Factory setting
[°C]
Order
no.
Output function 1 x NO / NC programmable · 1 x analogue output 4…20 mA or 0…10 V programmable
-50...150 -40...150
Process connection
M18 x 1.5 I TN2511
300 45
Output function 2 x NO / NC programmable
-50...150 -40...150M18 x 1.5 I TN7511
300 30 -50...150G 1/2 TN2405
300 50 -50...150G 1/2 TN2415
160 100 -50...150G 1/2 TN2435
160 150 -50...150G 1/2 TN2445
300 30 -50...1501/2" NPT TN2303
300 50 -50...1501/2" NPT TN2313
160 100 -50...1501/2" NPT TN2333
160 150 -50...1501/2" NPT TN2343
400 25 -50...150G 1/4 TN2105
400 50 -50...150G 1/4 TN2115
400 25 -50...1501/4" NPT TN2603
400 50 -50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...1501/4" NPT TN2613
Output function 2 x NO / NC programmable or
1 x NO / NC + 1 x analogue (4...20 mA / 0...10 V; scalable)
Response dynamics T05 / T09 [s] 1 / 3
Thermowell for temperature sensors,
Ø 6 mm,
high-grade stainless steel
(316L/1.4404)
E37610
Dimensions
48
M12x1
22
EL11
41
34
80
121
4
3
2
1
G ¼
6
Example 2105
63. 64
Process sensors
Temperature sensors
with DEUTSCH-, AMP or
M12 connector
Miniaturisation for mobile applications
The DEUTSCH, AMP or M12 connectors of the new
TA/TU/TM temperature sensors allow fast and easy
installation in mobile machines.
Their extremely compact housing ensures that the
sensors are particularly suited for use in applications
where space is limited.
Areas of application
The sensors of type TA/TU/TM are suited for mobile
applications and especially for hydraulic and pneumatic
applications with high operating pressure.
The high vibration and shock resistance, the high
protection rating, the excellent EMC resistance and the
E1 conformity make the TA/TU/TM sensors particularly
suitable for use in mobile machines.
Compact design with G 1/4 process
connection
Fast response time T05 / T09 = 1 s / 3 s
Installation depths of 25...200 mm
Measuring range -50...150 °C
Robust due to welded stainless steel
housing
Temperature sensors for
mobile machines
64. 65
(04.2016)
Process sensors
For further technical details please visit: www.ifm.com
Temperature sensors
Installation length
[mm]
Order no.
Factory setting
Connector
G 1/4 process connection
Analogue output 4...20 mA
25 M12
50 M12
200 M12
25 DEUTSCH
G 1/4 process connection
Analogue output 0.5...4.5 V
25 M12
25 DEUTSCH
25 AMP
Operating voltage [V DC]
Type TA
10...30
Operating voltage [V DC]
Type TU
8...32
Protection rating IP 68, IP 69K / lll
Materials in contact
with the medium
High-grade stainless steel
(316L/1.4404)
Further technical data
Reverse polarity / overload protection • / •
Response dynamics T05 / T09 1 s / 3 s
Ambient temperature [°C] -40...100
EMC
DIN EN 61000-6-2
DIN EN 61000-6-3
Dimensions
TA3105
TA3115
TA3155
TA4105
50 DEUTSCH TA4115
25 AMP TA5105
50 AMP TA5115
TU3105
TU4105
TU5105
-50...150 °C
-50...150 °C
G 1/4 process connection
Pt1000, class A
25 M12
25 DEUTSCH
TM5101
TM6101
-40...150 °C
1/4" NPT process connection
Analogue output 4...20 mA
50 M12
50 M12
TA3313
TA3317
0...300 °F /
0...100 °C
Wiring
M12x1
18,8
6
55,3 13
EL
19 G ¼
TA31
21,8
6
25,4
EL
1359,6
19 G ¼
TA41
25,8
6
EL
1359,8
19 G ¼
21,8
TA51
L+
BN1
WH2
OUT
BN1
WH2
BU3
L+
L
OUT
TU31TA31
A
C
B
OUT
L -
L +L +
TU41
1
3
L +
OUT
1
2
3
OUT
L +
L -
TU51TA51
A
B
OUT
+L
TA41