This document provides an index and product listings for paints and primers for industrial use. It includes 1K and 2K primers, shop primers, zinc-rich primers, converters, enamels, varnishes, thinners, degreasers, and additives. Products are grouped into chapters covering topics like primers, protective coatings, finishing products, thinners, and more. Each product listing provides the product code, name, details, packaging and pricing. This document appears to be a catalog for an industrial paint supplier.
Gulf Coast Paint's PC-2.8 Fast Drying Epoxy is an excellent product for OEM and other applications where speed and productivity is crucial. Can be recoated in 60 minutes @ 90°F and 105 minutes @ 75°F.
Effect of Acidic Environment (HCL) on Concrete With Sugarcane Bagasse Ash As ...IJERA Editor
With increasing demand and consumption of cement, researchers and scientist are in search of developing
alternate binders that are eco friendly and contribute towards waste management. The utilization of industrial
and agricultural waste produced by industrial processes has been the focus on waste reduction. One of the agro
waste sugarcane bagasse ash (SCBA) which is a fibrous waste product obtained from sugar mills as byproduct is
taken for study area. This experimental and analytical study investigates the durability of M35 concrete mix
using Ordinary Portland Cement and Sugarcane Bagasse Ash as partial replacement in Ordinary Portland
Cement. Sugarcane Bagasse Ash was obtained by burning of Sugarcane at 700 to 800 degree Centigrade in sugar
refining industry, Bagasse Ash obtained from burning was grounded until the particles passing the 90 micron
sieve. The disposal of this material is already causing environmental problems around the sugar factories. In this
project objective is to study the influence of partial replacement of Portland cement with sugarcane bagasse ash
in concrete subjected to different acidic Environments. The variable factors considered in this study were
concrete grade of M35 & curing periods of 28, 60, 90 days of the concrete specimens in 1%, 3%, and 5% of
hydrochloric acid in water for curing the specimens. Bagasse ash has been partially replaced in the ratio of 0%,
5%, 6%, 7%, 8%, 9%, and 10% by weight.
Gulf Coast Paint's PC-2.8 Fast Drying Epoxy is an excellent product for OEM and other applications where speed and productivity is crucial. Can be recoated in 60 minutes @ 90°F and 105 minutes @ 75°F.
Effect of Acidic Environment (HCL) on Concrete With Sugarcane Bagasse Ash As ...IJERA Editor
With increasing demand and consumption of cement, researchers and scientist are in search of developing
alternate binders that are eco friendly and contribute towards waste management. The utilization of industrial
and agricultural waste produced by industrial processes has been the focus on waste reduction. One of the agro
waste sugarcane bagasse ash (SCBA) which is a fibrous waste product obtained from sugar mills as byproduct is
taken for study area. This experimental and analytical study investigates the durability of M35 concrete mix
using Ordinary Portland Cement and Sugarcane Bagasse Ash as partial replacement in Ordinary Portland
Cement. Sugarcane Bagasse Ash was obtained by burning of Sugarcane at 700 to 800 degree Centigrade in sugar
refining industry, Bagasse Ash obtained from burning was grounded until the particles passing the 90 micron
sieve. The disposal of this material is already causing environmental problems around the sugar factories. In this
project objective is to study the influence of partial replacement of Portland cement with sugarcane bagasse ash
in concrete subjected to different acidic Environments. The variable factors considered in this study were
concrete grade of M35 & curing periods of 28, 60, 90 days of the concrete specimens in 1%, 3%, and 5% of
hydrochloric acid in water for curing the specimens. Bagasse ash has been partially replaced in the ratio of 0%,
5%, 6%, 7%, 8%, 9%, and 10% by weight.
SRC Internaonal is a leading company that specializes in various fields of the paint
industry. We have three main branches, SRC Resins, SRC Chemicals, and SRC Logisc.
``SRC Resins`` is a leading manufacturer of Alkyd and Acrylic resins, using
state-of-the-art technology and high-quality raw materials to produce a wide range
of Alkyd and Acrylic resins suitable for various industrial applicaons.
``SRC Chemicals`` specializes in sourcing and supplying high-quality paint raw
materials such as Polyisocyanates, TiO2 and some paint addives. While ``SRC
Logisc`` is an internaonal transport company that provides reliable and efficient
logiscs soluons for ADR Goods transport. All of our branches are commied to
providing high-quality products and excellent customer service. We strive to be a
dependable and reliable partner for businesses in the paint industry, as well as for
those who need internaonal transport soluons.
Our main goal is to cover our customer needs in terms of quality, performance and product lifetime. How important are the treatments and processes that our canopies suffer? Check it in this technical article.
PEB Steel specializes in the Design, Fabrication and Erection of pre-engineered steel buildings (PEBs), steel structures for factories, warehouses, showrooms, commercial/ trade centers, supermarkets, sport stadiums, exhibition halls, aircraft hangars, etc.
Refratechnik Casting develops, produces, and supplies highgrade process materials for steel production.
The Casting experts have 25 years of experience in the production
and application of biogenic silicas. This know-how has helped put
Refratechnik Casting into a commanding position.
Korea Zinc Flake Coating - Zincotec Co., Ltd.Onplus
◈ About Zincotec Co., Ltd.
All products manufactured by Zincotec are water soluble, non-flammable and environmentally friendly. Zincotec products also meet any and all safety standards and codes related to the harmfulness against the human body and create a safe and comfortable work environment with convenient handling and low odor, a significant difference when compared with solvent based products.
For more information, visit our website !
http://zincotec.com/
Refractory Product Line | Optimum Solutions for Cement PlantsRefratechnik Group
To meet the globally increasing demand for cement, energy saving firing systems with high specific output have been developed in the industrialized countries and introduced throughout the world. One of the primary results of these developments is the precalciner kiln with a short rotary kiln
section.
As each kiln is unique, appropriate refractories are a major factor in terms of service life.
SRC Internaonal is a leading company that specializes in various fields of the paint
industry. We have three main branches, SRC Resins, SRC Chemicals, and SRC Logisc.
``SRC Resins`` is a leading manufacturer of Alkyd and Acrylic resins, using
state-of-the-art technology and high-quality raw materials to produce a wide range
of Alkyd and Acrylic resins suitable for various industrial applicaons.
``SRC Chemicals`` specializes in sourcing and supplying high-quality paint raw
materials such as Polyisocyanates, TiO2 and some paint addives. While ``SRC
Logisc`` is an internaonal transport company that provides reliable and efficient
logiscs soluons for ADR Goods transport. All of our branches are commied to
providing high-quality products and excellent customer service. We strive to be a
dependable and reliable partner for businesses in the paint industry, as well as for
those who need internaonal transport soluons.
Our main goal is to cover our customer needs in terms of quality, performance and product lifetime. How important are the treatments and processes that our canopies suffer? Check it in this technical article.
PEB Steel specializes in the Design, Fabrication and Erection of pre-engineered steel buildings (PEBs), steel structures for factories, warehouses, showrooms, commercial/ trade centers, supermarkets, sport stadiums, exhibition halls, aircraft hangars, etc.
Refratechnik Casting develops, produces, and supplies highgrade process materials for steel production.
The Casting experts have 25 years of experience in the production
and application of biogenic silicas. This know-how has helped put
Refratechnik Casting into a commanding position.
Korea Zinc Flake Coating - Zincotec Co., Ltd.Onplus
◈ About Zincotec Co., Ltd.
All products manufactured by Zincotec are water soluble, non-flammable and environmentally friendly. Zincotec products also meet any and all safety standards and codes related to the harmfulness against the human body and create a safe and comfortable work environment with convenient handling and low odor, a significant difference when compared with solvent based products.
For more information, visit our website !
http://zincotec.com/
Refractory Product Line | Optimum Solutions for Cement PlantsRefratechnik Group
To meet the globally increasing demand for cement, energy saving firing systems with high specific output have been developed in the industrialized countries and introduced throughout the world. One of the primary results of these developments is the precalciner kiln with a short rotary kiln
section.
As each kiln is unique, appropriate refractories are a major factor in terms of service life.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
The key differences between the MDR and IVDR in the EUAllensmith572606
In the European Union (EU), two significant regulations have been introduced to enhance the safety and effectiveness of medical devices – the In Vitro Diagnostic Regulation (IVDR) and the Medical Device Regulation (MDR).
https://mavenprofserv.com/comparison-and-highlighting-of-the-key-differences-between-the-mdr-and-ivdr-in-the-eu/
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
Kseniya Leshchenko: Shared development support service model as the way to ma...Lviv Startup Club
Kseniya Leshchenko: Shared development support service model as the way to make small projects with small budgets profitable for the company (UA)
Kyiv PMDay 2024 Summer
Website – www.pmday.org
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Digital Transformation and IT Strategy Toolkit and TemplatesAurelien Domont, MBA
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
Company Valuation webinar series - Tuesday, 4 June 2024FelixPerez547899
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Putting the SPARK into Virtual Training.pptxCynthia Clay
This 60-minute webinar, sponsored by Adobe, was delivered for the Training Mag Network. It explored the five elements of SPARK: Storytelling, Purpose, Action, Relationships, and Kudos. Knowing how to tell a well-structured story is key to building long-term memory. Stating a clear purpose that doesn't take away from the discovery learning process is critical. Ensuring that people move from theory to practical application is imperative. Creating strong social learning is the key to commitment and engagement. Validating and affirming participants' comments is the way to create a positive learning environment.
What is the TDS Return Filing Due Date for FY 2024-25.pdfseoforlegalpillers
It is crucial for the taxpayers to understand about the TDS Return Filing Due Date, so that they can fulfill your TDS obligations efficiently. Taxpayers can avoid penalties by sticking to the deadlines and by accurate filing of TDS. Timely filing of TDS will make sure about the availability of tax credits. You can also seek the professional guidance of experts like Legal Pillers for timely filing of the TDS Return.
Recruiting in the Digital Age: A Social Media MasterclassLuanWise
In this masterclass, presented at the Global HR Summit on 5th June 2024, Luan Wise explored the essential features of social media platforms that support talent acquisition, including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok.
Recruiting in the Digital Age: A Social Media Masterclass
Industry Lecker's products
1.
2. INDEX
CHAPTER PRODUCTS PAGES
1. 1K PRIMERS
PRIMER 1K
PRIMER S/R
PRIMER S/R SAT
PRIMER S/R AC
4-5
2. FOSDER AND ZINC RICH
PRIMER
PRIMER FOSDER (SHOP PRIMER)
ZINC RICH PRIMER
6
3. 2K PRIMERS
PRIMER 60
PRIMER ECG
PRIMER PUR
PRIMER MASTIK
PRIMER ACRYLIC 2K
7-8
4. LECKER’S MIX CONCENTRATED PASTES 9
5. PRIMER CONVERTERS
PRIMSR
PRIMASAT
PRIMAC
PRIMACLOR
PRIMAECG
10
6. FINISHED CONVERTERS
PRIMACRIC CONVERTER
11-1210
10S
40
40S
50
60
20
20S
80
210
90
90T
7. FINISHED ENAMELS
PRIMACRIC
13-14P10
P20
P80
P100
P101
P210
HEAT PROOF
8. VARNISH
SYNTHETIC VARNISH
POLYURETHANE VARNISH
PRIMACRIC 90 VARNISH
VARNISH FOR METALS
RUST RESSISTANT VARNISH
15
9. URBAN PROTECTION
ANTI URINE
ANTI POSTERS
ANTIGRAFFITI
ANTI SLIDING
SOUND PROOF
16
10. THINNERS
DP10
DP20
DP60
17
11. DEGREASERS
DIRT OUT
SLOW DEGREASER
PLASTIC DEGREASER
18
12. ADITIVES
ANTISILICONE
UNIVERSAL MATTING PASTE
1K PLASTIC PRIMER
FLEXING ADDITIVE
POLYURETHANE AND ACRYLIC ACCELERANT
SYNTHETIC ACCELERANT
PAINTBRUSH ADDITIVE
TEXTURING
19-20
13. PAINTBRUSH PRIMACRIC 10 PRIMACRIC 10 SATIN & MATT 20
14. CATALYST GUIDE CATALYST GUIDE 21
14. METALLIC POTS LECKER’S BRANDED AND ANONYMOUS METALLIC POTS 22
15. APPLICATION SYSTEMS INDUSTRIAL APPLICATION SYSTEMS PROTECTION RECOMMENDED SURFACES 23
3. 4
1K PRIMER
Nitro synthetic primer filler fast drying filler useful for small irregularities such as pores, sand scratches, etc.. Avoid sanding sink marks and
spent an hour after application.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
131P1K/4L PRIMER 1K (GRAY) 4 L 2
PRIMER S/R
Fast drying synthetic primer of good coverage and matte appearance. To print use iron boilers, fittings, locks, etc. Painted over with any
kind of glazes.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
131SRG/5K PRIMER S/R (GRAY) 5 KG 2
131SRG/25K 25KG 1
131SRR/5K PRIMER S/R (RED) 5 KG 2
131SRR/25K 25KG 1
1. 1K PRIMERS
PRIMER S/R SATIN
Synthetic primer fast drying glossy good coverage and silky satin finish. To print use iron boilers, fittings, locks, etc.. Painted over with any
kind of glazes.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
131SRSG/5K PRIMER S/R SAT (GRAY) 5 KG 2
131SRSG/25K 25KG 1
131SRSR/5K PRIMER S/R SAT (RED) 5 KG 2
131SRSR/25K 25KG 1
131SRSB/5K PRIMER S/R SAT (WHITE) 5 KG 2
131SRSB/25K 25KG 1
PRIMER S/R AC
Synthetic primer fast drying corrosion good coverage and satin finish. To print use iron boilers, fittings, locks, industrial machinery, agricul-
tural, industrial vehicles, and so on. Painted over with any type of enamel.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
131SRACG/5K PRIMER S/R AC (GRAY) 5 KG 2
131SRACG/25K 25KG 1
131SRACR/5K PRIMER S/R AC (RED) 5 KG 2
131SRACR/25K 25KG 1
131SRACB/5K PRIMER S/R AC (WHITE) 5 KG 2
131SRACB/25K 25KG 1
131SRACN/5K PRIMER S/R AC (BLACK) 5 KG 2
131SRACN/25K 25KG 1
INDUSTRY LINE
4. 5
PRIMER CLOR
Fast drying chlorinated rubber coats and high chemical resistance. Excellent for protection of elements exposed to moisture, water, lubri-
cants, oils, fats, etc.. Especially suitable for truck chassis protection, agricultural machinery, mining, marine, etc.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
131CLG/5K PRIMER CLOR (GRAY) 5 KG 2
131CLG/25K 25KG 1
131CLR/5K PRIMER CLOR (RED) 5 KG 2
131CLR/25K 25KG 1
Paintsandproductsfortheindustrialsector.
5. 6
PRIMER FOSDER(SHOP PRIMER)
Primer fast drying and excellent adhesion to steel, galvanized steel, zinc plated, polished metal, aluminum, copper and bronze. Repaint-
able wet on wet with any kind of glazes, except cellulloses.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
131FG/5L PRIMER FOSDER (GRAY) 5 L 2
131FG/25L 25 L 1
131FR/5L PRIMER FOSDER (RED) 5 L 2
131FR/25L 25 L 1
131FG/5L PRIMER FOSDER (CREME) 5 L 2
131FG/25L 25 L 1
131FR/5L PRIMER FOSDER (WHITE) 5 L 2
131FR/25L 25 L 1
131FR/5L PRIMER FOSDER (BLACK) 5 L 2
131FR/25L 25 L 1
ZINC RICH PRIMER
High anti-corrosive primer for high zinc content in protecting steel against corrosion in aggressive environments and marine environ-
ments. Fast drying.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
131RZG/5K ZINC RICH PRIMER 4 L 2
2. FOSDER AND ZINC RICH PRIMER
INDUSTRY LINE
6. 7
3. 2K PRIMERS
PRIMER 60
Epoxy-polyamide primer high in pigment anticorrosive zinc phosphate for high corrosion protection. Excellent adhesion to steel, gal-
vanized steel, aluminum, bronze, copper, etc.. Painted over with any kind of wet on wet enamel, after 24 hours, sanding is required to
improve adhesion for subsequent layers. Ideal for achieving high corrosion protection in the painting of industrial machinery, agricultural,
marine, mining, industrial vehicles, and so on. Product of two components, mixing ratio, 5 parts of Primer 60, one part of ECG Catalyst .
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
13260G/5K PRIMER 60 (GRAY) 5 KG 2
13260G/20K 20 KG 1
13260R/5K PRIMER 60 (RED) 5 KG 2
13260R/20K 20 KG 1
13260B/5K PRIMER 60 (WHITE) 5 KG 2
13260B/20K 20 KG 1
Catalize 5:1 with Catalyst hardenner ECG
PRIMER ECG
Epoxy-polyamide primer thick, is used as an intermediate layer to get micronage, maximum 450 microns. High anticorrosive pigment, zinc
phosphate, to achieve high corrosion protection. Excellent adhesion to steel, galvanized steel, aluminum, bronze, copper, etc.. Painted
over with any kind of wet on wet enamel, after 24 hours, sanding is required to improve adhesion for subsequent layers. Ideal for such
protection in the painting of industrial machinery, agricultural, marine, mining, industrial vehicles, and so on. Product of two components,
mixing ratio, 5 parts of Primer 60, one part of ECG Catalyst .
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
132ECGG/5K PRIMER ECG (GRAY) 5 KG 2
132ECGG/20K 20 KG 1
132ECGB/5K PRIMER ECG (WHITE) 5 KG 2
132ECGB/20K 20 KG 1
Catalize 5:1 with Catalyst hardenner ECG
Paintsandproductsfortheindustrialsector.
7. 8
PRIMER ACRYLIC 2K
Primer two-component acrylic adhesive on steel, galvanized steel, aluminum, bronze, copper, etc.. Painted over with any kind of wet on
wet enamel, after 24 hours, sanding is required to improve adhesion for subsequent layers. Ideal for such protection in the painting of
industrial machinery, agricultural, mining, industrial vehicles, and so on. Satin finish, finish can be left without paint. Mixing ratio 5 parts
Acrylic Primer 2k for 1 part of catalyst Primacric B.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
132AB/5K PRIMER ACRYLIC 2K (WHITE) 5 KG 2
Catalize 5:1 with Catalyst hardenner Primacric B
PRIMER PUR
Acrylic polyurethane Primer high anti-corrosion. Excellent adhesion to steel, galvanized steel, aluminum, bronze, copper, etc.. Painted
over with any kind of wet on wet enamel, after 24 hours, sanding is required to improve adhesion for subsequent layers. Ideal for such
protection in the painting of industrial machinery, agricultural, marine, mining, industrial vehicles, and so on. Product of two components,
mixing ratio, 5 parts by Primer Pur , one part of Catalyst hardenner.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
132PG/5K PRIMER PUR (GRAY) 5 KG 2
132PG/25K 25 KG 1
132PB/5K PRIMER PUR (WHITE) 5 KG 2
132PB/25K 25 KG 1
Catalize 5:1 with Catalyst hardenner PUR
PRIMER MASTIK
Acrylic polyurethane Primer high anti-corrosion. Thick layered, excellent adhesion to steel, galvanized steel, aluminum, bronze, copper,
etc.. Painted over with any kind of wet on wet enamel. After 24 hours, sanding is required to improve adhesion for subsequent layers.
Ideal for such protection in the painting of industrial machinery, agricultural, marine, mining, industrial vehicles, and so on. Product of two
components, mixing ratio, 5 parts by Primer Pur part of Catalyst Hardenner.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
132MG/5K PRIMER MASTIK (GRAY) 5 KG 2
132MG/20K 20 KG 1
132MB/5K PRIMER MASTIK (WHITE) 5 KG 2
132MB/20K 20 KG 1
Catalize 5:1 with Catalyst hardenner PUR
INDUSTRY LINE
8. 9
4. LECKER’S MIX
LECKER’S MIX
LECKER’S MIX is a small paint factory within your company, it is a universal tinting system designed so that the distributor can easily make
any color, in different qualities, in the desired amount and quickly. So you can deliver the desired amount to various sectors like industry,
decoration, car, commercial vehicle, locksmith, boiler, facilities maintenance, sign makers, and others.
LECKER’S MIX lets you compose all kinds of colors following the steps in a software program that offers you all the time, the formulas of
the requested colors. By combining the 20 color concentrated pastes and more than 22 converters can produce colored primer and finish-
ing enamels various qualities and grades glosses and textures.
In all colors of the RAL, NCS, PANTONE, UNE, TRUCKS, BRITISH STANDARD, metallic, etc.. with the support of our department colorimetry
sample colors.
The system comprises a cabinet agitator stirring lids, precision scale and colorimetry program formulation needed to produce color.
CONCENTRATED PASTES
CODE PRODUCT FORMAT UNITS PER BOX €/L
LM01 WHITE 4 L 2
LM02 INTENSE BLACK 4 L 2
LM03 OCRE 4 L 2
LM04 ORANGE 4 L 2
LM05 LEMON YELLOW 4 L 2
LM06 MEDIUM YELLOW 4 L 2
LM07 RUST RED 4 L 2
LM08 LIVE RED 4 L 2
LM09 RS RED 4 L 2
LM10 SCARLET RED 4 L 2
LM11 BLUE A 4 L 2
LM12 BLUE B 4 L 2
LM13 VIOLET 4 L 2
LM14 GREEN 4 L 2
METALIZED PASTES
CODE PRODUCT FORMAT UNITS PER BOX €/L
LM20 FINE GRAIN ALUMINIUM 4 L 2
LM21 MEDIUM GRAIN ALUMINIUM 4 L 2
LM22 THICK GRAIN ALUMINIUM 4 L 2
LEADLESS CONCENTRATED PASTES
LM30 SP YELLOW 4 L 2
LM31 SP1 ORANGE 4 L 2
LM32 SP2 ORANGE 4 L 2
Paintsandproductsfortheindustrialsector.
9. 10
5. PRIMER CONVERTERS
PRIMSR
Fast drying synthetic binder primer of high coverage and matte appearance. To print use iron boilers, fittings, locks, etc.. Painted over with
any kind of glazes.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
601/5K PRIMSR 10 5 KG 2
601/25K 25 KG 1
PRIMASAT
Synthetic primer binder glossy, fast drying and good coverage of glossy appearance. To print use iron boilers, fittings, locks, industrial
machinery, agricultural, industrial vehicles, and so on. Painted over with any type of enamel.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
602/5K PRIMASAT 5 KG 2
602/25K 25 KG 1
PRIMAC
Synthetic binder primer fast drying corrosion good coverage and satin finish. To print use iron boilers, fittings, locks, industrial machinery,
agricultural, industrial vehicles, and so on. Painted over with any type of enamel.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
603/5K PRIMASAT 5 KG 2
603/25K 25 KG 1
PRIMACLOR
Chlorinated rubber-alkyd primer converter with high corrosion protection, fast drying. Spatially suitable for wet environments, marine,
mining, etc, where you need protection against water.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
604/5K PRIMACLOR 5 KG 2
604/25K 25 KG 1
PRIMAECG
Epoxy-polyamide primer binder thick film is used as an intermediate layer to get micronage, maximum 450 microns. High anticorrosive
pigment, zinc phosphate, to achieve high corrosion protection. Excellent adhesion to steel, galvanized steel, aluminum, bronze, copper,
etc. Painted over with any kind of wet on wet enamel. After 24 hours, sanding is required to improve adhesion for subsequent layers. Ideal
for such protection in the painting of industrial machinery, agricultural, marine, mining, industrial vehicles, and so on. Product of two
components, mixing ratio, 5 parts of ECG for a 1 part of Catalyst Hardenner ECG.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
605/5K PRIMAECG 5 KG 2
605/25K 25 KG 1
Catalize 5:1 with Catalyst hardenner ECG
INDUSTRY LINE
10. 11
6. FINISHED CONVERTERS
FINISHED CONVERTERS
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
CONVERTIDOR PRIMACRIC 10: Converter synthetic fast drying high gloss.
611/5K CP 10 5 KG 2
611/20K 20 KG 1
CONVERTIDOR PRIMACRIC 10S: Synthetic fast drying satin binder..
612/5K CP 10S 5 KG 2
612/20K 20 KG 1
CONVERTIDOR PRIMACRIC 40: Nitro-synthetic glossy binder..
615/5K CP 40 5 KG 2
615/20K 20 KG 1
CONVERTIDOR PRIMACRIC 40S: Nitro-Synthetic satin binder.
616/5K CP 40S 5 KG 2
616/20K 20 KG 1
CONVERTIDOR PRIMACRIC 50: Chlorinated rubber binder.
617/5K CP 50 5 KG 2
617/20K 20 KG 1
CONVERTIDOR PRIMACRIC 60: Primacric 60 binder, epoxi.
618/5K CP 60 5 KG 2
618/20K 20 KG 1
Catalize 5:1 with Catalyst hardenner ECG
FINISHED CONVERTERS
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
CONVERTIDOR PRIMACRIC 20: High gloss polyurethane binder.
613/5K CP 20 5 KG 2
613/20K 20 KG 1
Catalize 5:1 with Catalyst hardenner 313116
CONVERTIDOR PRIMACRIC 20S: Polyurethane satin binder.
614/5K CP 20S 5 KG 2
614/20K 20 KG 1
Catalize 5:1 with Catalyst hardenner 313111
CONVERTIDOR PRIMACRIC 80: Straght shine 2k acrylic binder.
619/5K CP 80 5 KG 2
619/20K 20 KG 1
Catalize 5:1 with Catalyst hardenner 313131
CONVERTIDOR PRIMACRIC 210: 1K, Bi-layer acrylic binder.
622/5K CP 210 5 KG 2
622/20K 20 KG 1
Paintsandproductsfortheindustrialsector.
11. 12
FINISHED CONVERTERS
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
PRIMACRIC 90 CONVERTER: Direct adherence acrylic 2k binder.
620/5K CP 90 5 KG 2
620/20K 20 KG 1
Catalize 5:1 with Catalyst hardenner 313116 y 313204
PRIMACRIC 90T CONVERTER: Direct adherence acrylic 2k binder , anti corrosive. Use for texturing.
621/5K CP 90T 5 KG 2
621/20K 20 KG 1
Catalize 5:1 with Catalyst hardenner 313116 and 313204
INDUSTRY LINE
12. 13
7. FINISHED ENAMELS
FINISHED ENAMELS
Pure finished enamel, unmixed colors. The white is just white pigment so that it can be used directly or to tweak the LECKER’S MIX bases
for all kinds of white, gray or pastel colors. Blacks are made from intense black to get a good color intensity and excellent coverage.
Forge effect, gray can be used as a spot color or dye with LECKER’S MIX’s bases to make a range of colors, limited.
Prices for a minimum 50 Kg order.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
PRIMACRIC 10 S/R GLOSS BASE WHITE: Enamel SYNTHETIC drying fast GLOSSY.
11P10B/5K PRIMACRIC 10 5 KG 2
11P10B/20K 20 KG 1
PRIMACRIC 10 S/R SATIN BASE WHITE: Enamel SYNTHETIC drying fast SATIN.
11P10N/5K PRIMACRIC 10 5 KG 2
11P10N/20K 20 KG 1
PRIMACRIC 10 S/R GLOSS BLACK INTENSE: Enamel SYNTHETIC drying fast GLOSSY.
11P10SN/5K PRIMACRIC 10S 5 KG 2
11P10SN/20K 20 KG 1
PRIMACRIC 10 S/R SATIN BASE BLACK: Enamel SYNTHETIC drying fast SATIN.
11P10SB/5K PRIMACRIC 10S 5 KG 2
11P10SB/20K 20KG 1
FINISHED ENAMELS
Prices for a minimum 50 Kg order.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
PRIMACRIC 10M MATT BASE WHITE: Synthetic drying fast matt enamel.
P10MB/5K PRIMACRIC 10M 5 KG 2
P10MB/20K 20 KG 1
PRIMACRIC 10M MATT BLACK INTENSE: Synthetic fast drying matt enamel.
P10MN/5K PRIMACRIC 10M 5 KG 2
P10MN/20K 20 KG 1
PRIMACRIC 20 GLOSS BASE BLACK: Synthetic fast drying glossy enamel.
P20B/5K PRIMACRIC 20 5 KG 2
P20B/20K 20 KG 1
PRIMACRIC 20 GLOSS BLACK INTENSE: Synthetic fast drying glossy enamel.
P20N/5K PRIMACRIC 20 5 KG 2
P20N/20K 20KG 1
Paintsandproductsfortheindustrialsector.
13. 14
FINISHED ENAMELS
Prices for a minimum 50 Kg order.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
PRIMACRIC 20S SATIN BASE WHITE: Polyurethane satin enamel.
P20SB/5K PRIMACRIC 20S 5 KG 2
P20SB/20K 20 KG 1
PRIMACRIC 20S SATIN BLACK INTENSE: Polyurethane satin enamel.
P20SN/5K PRIMACRIC 20S 5 KG 2
P20SN/20K 20 KG 1
PRIMACRIC 20M MATT BASE BLACK: Polyurethane matt enamel.
P20MB/5K PRIMACRIC 20M 5 KG 2
P20MB/20K 20 KG 1
PRIMACRIC 20M MATT BLACK INTENSE: Polyurethane matt enamel.
P20MN/5K PRIMACRIC 20M 5 KG 2
P20MN/20K 20KG 1
FINISHED ENAMELS
Prices for a minimum 50 Kg order.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
PRIMACRIC 80 GLOSS BASE WHITE: Acrylic mono layer direct gloss.
P80B/5K PRIMACRIC 80 5 KG 2
P80B/20K 20 KG 1
PRIMACRIC 80 GLOSS BLACK INTENSE: Acrylic mono layer direct gloss.
P80N/5K PRIMACRIC 80 5 KG 2
P80N/20K 20 KG 1
PRIMACRIC 101 FORGE EFFECT: Bi-layer forge effect enamel.
P100G/4L PRIMACRIC 100 (GRAY) 4 L 2
P100N/4L PRIMACRIC 100 (BLACK) 4 L 2
PRIMACRIC 100 FORGE EFFECT: Bi-layer forge effect enamel.
P101G/4L PRIMACRIC 101 (GRAY) 4 L 2
P101N/4L PRIMACRIC 101 (BLACK) 4 L 2
PRIMALCOAT 200 HEAT PROOF
Aluminum Heat-Proof with a high resistance to chemicals and temperatures up to 350 ° C. Also used to protect and hide the welds on
galvanized sheet. Fast drying and high covering power.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
239AL SPRAY PRIMALCOAT 200 400 ML 12
PALC200 PRIMALCOAT 200 5 L 2
INDUSTRY LINE
14. 15
SYNTHETIC GLOSSYVARNISH
Quick-drying synthetic varnish, glossy. Good performance, great expandability. Bonding on iron.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
91P10/5L VARNISH SYNTHETIC GLOSSY 5 L 2
91P10/20L 20 L 2
POLYURETHANE GLOSSYVARNISH
Two-component polyurethane varnish and high brightness. Good performance, great expandability. Bonding on iron.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
92P20/5L VARNISH POLYURETHANE GLOSSY 5 L 2
92P20/20L 20 L 2
Catalize 5:1 with Catalyst hardenner 313116
POLYURETHANE SATINVARNISH
Two-component polyurethane varnish satin. Good performance, great expandability. Bonding on iron.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
92P20S/5L VARNISH POLYURETHANE SATIN 5 L 2
92P20S/20L 20 L 2
Catalize 5:1 with Catalyst hardenner 313111
8.VARNISH
PRIMACRIC 90 AD GLOSSYVARNISH
Two-component polyurethane varnish and high gloss. Good performance, great expandability. Bonding on steel, galvanized steel, zinc,
aluminum, polished metal, copper and bronze.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
92P90AD/5L VARNISH PRIMACRIC 90 AD GLOSSY 5 L 2
92P90AD/20L 20 L 2
Catalize 5:1 with Catalyst hardenner 313204
VARNISH FOR METALS
Special mono component varnish for metal protection. Commonly used over grained steel.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
91BM/5L VARNISH METALES 5 L 2
91BM/20L 20 L 2
VARNISH RUST RESSISTANT
Anti-rust mono component varnish for a temporal anticorrosive protection of mechanized parts.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
91A/1L VARNISH RUST RESSISTANT 5 L 2
91A/20L 20 L 2
Paintsandproductsfortheindustrialsector.
15. 16
9. URBAN PROTECTION
ANTI URINE
Painting very thick dark gray with high chemical resistance and mechanical special protection from the urine in urban metallic elements
such as the underside of lampposts, litter bins base, benches, fountains, swings, cabinets, etc.. Acids and alkalis prevents the urine form
forming corrosion.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
P1100GO/4K PRIMACRIC 1100 4 KG 2
ANTI POSTERS
Product manufactured in paint or varnish of two components, satin or matt and direct adhesion to steel, galvanized steel, zinc, aluminum,
polished metal, copper and bronze. It is used for painted or varnished surfaces to prevent can hook stickers, posters, tapes, etc.. Example,
adhesives“Locksmith 24 hours”in roller shutters, lamps, cabinets, walls, etc.
It can be manufactured in any color on request.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
PSG150/5K PSG 150 5 KG 2
Catalize 5:1 with Catalyst hardenner PSG
ANTI GRAFITTI
Product manufactured in paint or varnish of two components, satin or matt and direct adhesion to steel, galvanized steel, zinc, aluminum,
polished metal, copper and bronze. It is used for painted or varnished surfaces to prevent marking or painting over them. Makes it difficult
for tints, inks, laquers and spray paint and adhesives o adhere to the surface and makes it easy to clean off any residue that might have
been left.
It can be manufactured in any color on request. Mixing ratio 5:1.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
PSG180/5K PSG 180 5 KG 2
Catalize 5:1 with Catalyst hardenner PSG
ANTI SLIPPING
Product manufactured in paint or varnish of two components, gloss, satin or matte and direct adhesion to steel, galvanized steel, zinc,
aluminum, polished metal, copper and bronze. It is used for painted or varnished surfaces, offering grip , rough-looking but discreet.
Gives a safe non-slip surface to avoid possible slipping accidents. Examples, metal stairs, ramps, grab rails, etc.
It can be manufactured in any color on request.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
PSG190/5K PSG 190 5 KG 2
Catalize 5:1 with Catalyst hardenner PSG
SOUNDPROOF
Painting very thick dark gray with high chemical and mechanical resistance, especially for soundproofing in metal elements such as load-
ing hoppers. Also to give consistency to plate elements and prevent vibration.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
131N4336/5 SOUNDPROOF 4 KG 2
Catalize 5:1 with Catalyst hardenner PSG
INDUSTRY LINE
16. 17
10.THINNERS
DP10THINNER
Thinner for synthetic paints and varnishes
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
52DS/5L DP10 THINNER 5 L 2
52DS/25L 25 L 1
DP20THINNER
Special thinner to dilute paints and polyurethane varnishes.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
523134/1L
DP20 THINNER
1 L 6
523134/5L 5 L 2
523134/25L 25 L 1
DP20 SLOWTHINNER
Special thinner to dilute paints and polyurethane varnishes. Adequate for areas and periods of high temperature. Slows down the evapo-
ration rate, favoring stretching sprayed, avoiding leaving orange peel strips in joints, boiled and typical defects that occur with excessive
heat.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
525135/1L
DP20 SLOW THINNER
1 L 6
525135/5L 5 L 2
525135/25L 25 L 1
DP20 EXTRA-SLOWTHINNER
Special thinner areas and periods of very high temperatures. Slows down the evaporation rate, favoring stretching sprayed, avoiding
leaving orange peel strips in joints, boiled and typical defects that occur with excessive heat.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
525136/1L
DP20 EXTRA-SLOW THINNER
1 L 6
525136/5L 5 L 2
525136/25L 25 L 1
DP60THINNER
Special thinner for chlorinated rubber.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
52DE/5L DP60 THINNER 5 L 2
52DE/25L 25 L 1
Paintsandproductsfortheindustrialsector.
17. 18
11. DEGREASERS
DIRT OUT
Degreaser fast evaporating solvent base for degreasing and cleaning of the surfaces before painting. This product has no odor and no
tide, is very suitable for manual degreasing indoor areas with poor ventilation.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
54DR/5L DIRT OUT FAST DEGREASER 5 L 2
54DR/25L 25L 1
Catalize 5:1 with Catalyst hardenner 313204
ANTI-SILICON SLOW DEGREASER
Solvent based degreaser for degreasing slow evaporation and manual cleaning of the surfaces before painting.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
54DL/5L ANTI-SILICON SLOW DEGREASER 5 L 2
54DL/25L 25 L 1
PLASTIC’S DEGREASER
Antistatic plastic degreasing, eliminates static electricity from plastics, greases and release agents as well.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
54DP/5L PLASTIC’S DEGREASER 5 L 2
54DP/25L 25 L 1
INDUSTRY LINE
18. 19
12. ADITIVES
ANTI-SILICONE
Additive to prevent contamination of silicones in the work of painting or varnishing.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
7ADAS/1L ANTI-SILICONE 1 L 6
UNIVERSAL MATTING PASTE
Universal product to lower the brightness or refine paintings of one or two components.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
7MTUN/1L UNIVERSAL MATTING PASTE 1 L 6
7MTUN/5L 5 L 2
1K PLASTIC PRIMER
Plastic adhesion primer type ABS, PVC and other plastics used in automotive applications. Test upon arising doubts.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
7PP/1L 1K PLASTIC PRIMER 1 L 6
FLEXING ADDITIVE FOR ACRYLICS
Additive to add acrylic paint or varnish or polyurethane two components to confer elasticity and rigidity to prevent topcoats.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
7F/1L FLEXING ADDITIVE FOR ACRYLICS 1 L 6
ACRYLIC & POLYURETHANE ACCELERANT
Additive to add in a 3-5% proportion to varnishes, paints, high thickness two component filler. Help and speeds drying. It is very import-
ant to adhere to the recommended mixing proportion for this product.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
7AAP/1L ACRYLIC & POLYURETHANE ACCELERANT 1 L 6
SYNTHETICS ACCELERANT
Additive in proportion to add 3-5% to varnishes and paints. Help and speeds drying. It is very important to adhere to recommended this
product.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
7AS/1L SYNTHETICS ACCELERANT 1 L 6
PAINTBRUSH ADDITIVE
Additive for paints and varnishes to add one or two components. Allows you to slow down the evaporation comb and scrub the surface
thoroughly.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
7ADBH/1L PAINTBRUSH ADDITIVE 1 L 6
Paintsandproductsfortheindustrialsector.
19. 20
GR 01TEXTURING
Additive fine texturing. Is added to paint or varnish to give a textured appearance.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
7TGR1/1L GR 01 TEXTURING 1 L 6
GR 02TEXTURING
Additive mild texturing. Is added to paint or varnish to give a textured appearance.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
7TGR2/1L GR 02 TEXTURING 1 L 6
GR 04TEXTURING
Additive thick texturing. Is added to paint or varnish to give a textured appearance.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
7TGR4/1L GR 04 TEXTURING 1 L 6
GR 05TEXTURING
Additive extra thick texturing. Is added to paint or varnish to give a textured appearance.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
7TGR5/1L GR 05 TEXTURING 1 L 6
PAINT BRUSH PRIMACRIC 10
Synthetic converter to apply by paintbrush or paint roller.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
624/1L PRIMACRIC 10 1 L 6
624/4L 4 L 2
SATIN PAINT BRUSH PRIMACRIC 10
Satin synthetic converter to apply by paintbrush or paint roller.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
625/1L PRIMACRIC 10 SATIN 1 L 6
625/4L 4 L 2
MATT PAINT BRUSH PRIMACRIC 10
Matt synthetic converter to apply by paintbrush or paint roller.
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
626/1L PRIMACRIC 10 MATT 1 L 6
626/4L 4 L 2
13. PAINT BRUSH PRIMACRIC 10
INDUSTRY LINE
20. 21
13. CATALYST GUIDE
CATALYST HARDENNERS FOR FINISHES
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
31031 CATALYST 31031 1 L 6
323111 CATALYST 3111 1 L 6
323113 CATALYST 3113 1 L 6
323204 CATALYST 3204 1 L 6
323116 CATALYST 3116 1 L 6
PSG700 CATALYST PSG 1 L 6
CATALYST HARDENNERS FOR PRIMERS
CODE PRODUCT FORMAT UNITS PER BOX PRICE PER UNIT(€)
31ECG CATALYST ECG 1 L 6
31P/1L CATALYST 31P 1 L 6
31P/5L 5 L 2
Paintsandproductsfortheindustrialsector.
21. 22
15. METALLIC POTS
LECKER’S EMPTY METALLIC POTS
Empty metallic pots with Lecker’s finished design.
CODE PRODUCT FORMAT PRICE PER UNIT(€)
005 ENCIL/1L Cylindrical LECKER’S pot 1L + lid 1 L
072 ENCILIN/4L Cylindrical LECKER’S pot 4L + lid 4 L
072 ENTULIPA/4L Cylindrical LECKER’S pot 4L + lid 4 L
072 ENTULIP/5L Cylindrical LECKER’S pot 5L + lid 5 L
ANONYMOUS METALLIC POTS
Empty metallic unbranded pots.
CODE PRODUCT FORMAT PRICE PER UNIT(€)
036ENCIL/1L/A Cylindrical anonymous pot + lid 1 L
072 ENCILIN/22L 22L pot + lid 22 L
INDUSTRY LINE
22. 23
SURFACETO BE PROTECTED
ACCORDINGTO ENVIRONMENT
ENVIRONMENT
SURFACE
PREPARATION
# OF
HANDS *
LAYER
THICKNESS**
PRODUCT
IRON AND STEEL
LIGHT o St2 / Sa2
1
1
20/40
30
Primer Fosder / Primer SR
Primacric 10 / Primacric 20
MODERATE o o St2-St3 / Sa2 1/2
1
2
40
70
Primer Fosder
Primacric 20
HIGH o o o St3 / Sa2 1/2
2
2
70
70
Primer ECG / Primer Mastik
Primacric 20
VERY HIGH o o o o Sa2 1/2 / Sa3
2
1
2
60
60
70
Primer ECG Gris / Primer Mastik
Primer ECG Blanca / Primer Mastik
Primacric 80
GALVANIZED IRON, ALUMINUM, POLISHED AND GALVANIZED METAL
LIGERA o DG
1
1
15
30
Primer Fosder
Primacric 10 / Primacric 20
MODERATE o o DG
1
2
15
70
Primer Fosder
Primacric 20
HIGH o o o DG
1
1
2
15
40
70
Primer Fosder
Primer ECG
Primacric 20
VERY HIGH o o o o DG
1
2
2
15
70
70
Primer Fosder
Primer ECG
Primacric 80
* HANDS: Number of layers to be applied. ** LAYERS: Thickness of layers expressed in microns.
ENVIRONMENT
AGGRESSION
USE AND PURPOSE
LIGHT Protection and exterior surfacing in rural and interior in normal circumstances.
MODERATE
Protection and finishing exterior surfaces intended for marine environments or rigorous aggressively
chemicals..
HIGH
Protection and finishing exterior surfaces intended for marine environments or rigorous aggressively
chemicals.
VERY HIGH
Protection and finishing of surfaces exposed to splash, chemical attacks, continuous immersion or
extreme conditions of high corrosion.
15. APPLICATION SYSTEMS
Paintsandproductsfortheindustrialsector.