Hygiene: Estimating and Understanding Personal Exposure to Inhalation of Vapo...Gerard B. Hawkins
Hygiene: Estimating and Understanding Personal Exposure to Inhalation of Vapors on Chemical Plants
It is a vital aspect of chemical plant design and operation to minimize any contact of the operating and maintenance personnel with the chemicals on the plant. Often the most significant route of exposure to chemicals is by inhalation, and in this case it is relatively easy to measure exposure. This has led to the development of standards which indicate levels of exposure which should minimize any risk to health. These will be called Occupational Exposure
Limits (OELs) in this Guide as a generic name...
This Quality Plan and Inspection and Test Plan is prepared to assure the safe operational and to provide the guidance controlling Quality, Inspection and Test activities of ready mix concrete supply, including its raw material for Betara Complex development Project, Jambi, Indonesia.
Application of Process to Management of Change and ModificationsGerard B. Hawkins
Application of Process to Management of Change and Modifications
Hazard Study Process: GBHE-PGP-006
CONTENTS
1.0 PURPOSE
1.1 THE NEED FOR MODIFICATIONS
1.2 GENERAL DESCRIPTION OF A MODIFICATION
1.3 PRINCIPLES TO BE FOLLOWED
1.4 REPLACEMENT OF ’LIKE WITH LIKE’
1.5 REMOTE / SMALLER SITES
1.6 GENERAL GUIDANCE TO INDIVIDUALS DOING SHE ASSESSMENTS FOR MODIFICATIONS
1.7 MODIFICATIONS HAZARD STUDY DECISION MECHANISM
1.7.1 Purpose
1.7.2 Methodology
FIGURE 1 MODIFICATION FLOWCHART
M1 Title, description, registration and process flowsheet
Gate 1 Preliminary authorization
Table 1 Difference between a Modification and a Project
M2 Risk Assessment
Gate 2 Approval
M3 Detailed design and implementation
Gate 3 Pre-Commissioning check
M4 Commissioning
Gate 4 Commissioned
M5 Final review and file
APPENDIX
APPENDIX A CHECKLIST FOR MODIFICATIONS
APPENDIX B DOCUMENTATION PROMPT LIST
APPENDIX C TYPICAL MODIFICATION FORM
G1 PRELIMINARY AUTHORIZATION
M2 PRELIMINARY SSHE ASSESSMENT
G2 REVIEW PRELIMINARY SSHE ASSESSMENT
M3 DESIGN and ESTIMATION
SSHE ASSESSMENT
G3 APPROVAL
M4 DETAILED DESIGN AND IMPLEMENTATION
G4 PRE-COMMISSIONING CHECK
M5 COMMISSIONING
G5 COMMISSIONED
M6 FINAL REVIEW AND FILE
Specialty gases: essential for research, production & quality controlLinde Gas Benelux
Laboratories all around the world stand or fall by their reputation for accuracy and quality control. Pivotal to this performance is the quality, purity and composition of the spectrum of gases harnessed every day to accomplish laboratory tasks.
Rapid advancements in production processes across all industry sectors, as well as healthcare, have obliged laboratories to keep up with these changes, while remaining flexible and making allowances for future requirements. Against this background, a variety of role-specific specialised laboratory types have emerged, each addressing specific industry needs.
Pressure Relief Systems
BACKGROUND TO RELIEF SYSTEM DESIGN Vol.1 of 6
The Guide has been written to advise those involved in the design and engineering of pressure relief systems. It takes the user from the initial identification of potential causes of overpressure or under pressure through the process design of relief systems to the detailed mechanical design. "Hazard Studies" and quantitative hazards analysis are not described; these are seen as complementary activities. Typical users of the Guide will use some Parts in detail and others in overview.
Cv for lab professional oil,gas,petrochemicalsg sarma
Having 30+Yeareas of experience in Oil, Gas, Refinery & Petrochemical Labs.Out of which 20 years in UAE.
Having experience in Quality management systems of ISO 9001 & ISO 17025
Qualification M.Sc Applied chemistry.
Hygiene: Estimating and Understanding Personal Exposure to Inhalation of Vapo...Gerard B. Hawkins
Hygiene: Estimating and Understanding Personal Exposure to Inhalation of Vapors on Chemical Plants
It is a vital aspect of chemical plant design and operation to minimize any contact of the operating and maintenance personnel with the chemicals on the plant. Often the most significant route of exposure to chemicals is by inhalation, and in this case it is relatively easy to measure exposure. This has led to the development of standards which indicate levels of exposure which should minimize any risk to health. These will be called Occupational Exposure
Limits (OELs) in this Guide as a generic name...
This Quality Plan and Inspection and Test Plan is prepared to assure the safe operational and to provide the guidance controlling Quality, Inspection and Test activities of ready mix concrete supply, including its raw material for Betara Complex development Project, Jambi, Indonesia.
Application of Process to Management of Change and ModificationsGerard B. Hawkins
Application of Process to Management of Change and Modifications
Hazard Study Process: GBHE-PGP-006
CONTENTS
1.0 PURPOSE
1.1 THE NEED FOR MODIFICATIONS
1.2 GENERAL DESCRIPTION OF A MODIFICATION
1.3 PRINCIPLES TO BE FOLLOWED
1.4 REPLACEMENT OF ’LIKE WITH LIKE’
1.5 REMOTE / SMALLER SITES
1.6 GENERAL GUIDANCE TO INDIVIDUALS DOING SHE ASSESSMENTS FOR MODIFICATIONS
1.7 MODIFICATIONS HAZARD STUDY DECISION MECHANISM
1.7.1 Purpose
1.7.2 Methodology
FIGURE 1 MODIFICATION FLOWCHART
M1 Title, description, registration and process flowsheet
Gate 1 Preliminary authorization
Table 1 Difference between a Modification and a Project
M2 Risk Assessment
Gate 2 Approval
M3 Detailed design and implementation
Gate 3 Pre-Commissioning check
M4 Commissioning
Gate 4 Commissioned
M5 Final review and file
APPENDIX
APPENDIX A CHECKLIST FOR MODIFICATIONS
APPENDIX B DOCUMENTATION PROMPT LIST
APPENDIX C TYPICAL MODIFICATION FORM
G1 PRELIMINARY AUTHORIZATION
M2 PRELIMINARY SSHE ASSESSMENT
G2 REVIEW PRELIMINARY SSHE ASSESSMENT
M3 DESIGN and ESTIMATION
SSHE ASSESSMENT
G3 APPROVAL
M4 DETAILED DESIGN AND IMPLEMENTATION
G4 PRE-COMMISSIONING CHECK
M5 COMMISSIONING
G5 COMMISSIONED
M6 FINAL REVIEW AND FILE
Specialty gases: essential for research, production & quality controlLinde Gas Benelux
Laboratories all around the world stand or fall by their reputation for accuracy and quality control. Pivotal to this performance is the quality, purity and composition of the spectrum of gases harnessed every day to accomplish laboratory tasks.
Rapid advancements in production processes across all industry sectors, as well as healthcare, have obliged laboratories to keep up with these changes, while remaining flexible and making allowances for future requirements. Against this background, a variety of role-specific specialised laboratory types have emerged, each addressing specific industry needs.
Pressure Relief Systems
BACKGROUND TO RELIEF SYSTEM DESIGN Vol.1 of 6
The Guide has been written to advise those involved in the design and engineering of pressure relief systems. It takes the user from the initial identification of potential causes of overpressure or under pressure through the process design of relief systems to the detailed mechanical design. "Hazard Studies" and quantitative hazards analysis are not described; these are seen as complementary activities. Typical users of the Guide will use some Parts in detail and others in overview.
Cv for lab professional oil,gas,petrochemicalsg sarma
Having 30+Yeareas of experience in Oil, Gas, Refinery & Petrochemical Labs.Out of which 20 years in UAE.
Having experience in Quality management systems of ISO 9001 & ISO 17025
Qualification M.Sc Applied chemistry.
• Lead a quality engineering team that supports all business units during component and finished device manufacturing transfers at suppliers around the world.
• Assess legacy specifications for compliance and work with R&D to update any required changes.
• Perform gap assessment, and facilitate gap closure with cross-functional team members, Enhance KPIs
• Provide expert guidance in interpreting governmental regulations, agency guidelines and PHF internal policies in general and specific to transfers to assure compliance.
• Understand all validation quality policy/system interfaces and dependencies between business partners and internal/external processes.
• Oversee the completion of projects through the development and approval of validation schedules, project plans, master plans, validation protocols and reports for systems to support the validation plan.
• Manages validation and qualification activities with Development, Manufacturing, and Engineering, Quality, Regulatory and other groups on projects.
• Manages the activities of assigned SMEs and contract personnel to ensure the quality of completed work.
• Provides technical assessment and approval for engineering and process changes.
• Reviews and approves protocols, reports and data tables generated by subordinates and contract personnel.
• Ensures solutions are consistent with organizational objectives.
• Support, mentor, train and educate suppliers in planning and executing the validation processes, best practices
• Support with metrics and reporting on critical aspects regarding the health of the overall project.
• Support the development and implementation of validation procedures, best practices, and training/education programs.
• Lead internal and external audits and inspections related to component and manufacturing transfers.
• Provide continuous and rigorous assessment of activities and documentation to assure compliance with FDA regulations, ISO 13485, and Corporate Policy through the review of qualification and/or validation records at critical phases.
• Uses full knowledge of cGMP, FDA CFR 820, Corporate Policy and industry best practices to ensure risk management, validation processes, acceptance and qualification processes, and documentation are efficient
Accomplished as QA/QC specialist in Precast concrete products for more than 15+years(11+years gulf + 4 years India ) in the field of Chemical & Precast concrete Industry. Seeking a challenging position with career growth opportunities in the field of Quality control
1. IDRIS BAROT
Contact: 09619402291 E-Mail: idrisbarot@gmail.com, idrisbarot@yahoo.com
JOB OBJECTIVE
Seeking middle level assignments in Laboratory Operations / Production Operations preferably in Oil / Chemicals / Petroc
hemicals industry
Location Preference: Anywhere.
PROFILE SUMMARY
A dynamic professional with nearly 8 years of experience in Laboratory Operations and Testing
Proven abilities in managing technically advanced, cost-efficient and state of the art production systems; valuable
contributions including waste reductions and cost control
Proven track record of participating in various laboratory activities with real -time experience in planning, execution,
application of methodologies, documentation and presentation of findings
Proficient in streamlining processes / procedures to facilitate robust Quality Management Systems and implementing
various quality measures to ensure operational efficiency
Adept at carrying out various tests and inspection for various processes and checking the quality standards of final
goods; demonstrated acumen in ensuring that processes are conducted in accordance with set guidelines and
statutory regulations
CORE COMPETENCIES
Supervising the upkeep of all lab areas; updating the inventory of lab chemicals and instruments
Undertaking sampling/analysis activities as per schedule and on a daily basis; managing calibration of instruments;
planning deviation and re-processing result in laboratory
Reporting quality problem to management investigating out of specification laboratory results
Reviewing documents /analytical reports thereby ensuring documentation as per guidelines
Leading, mentoring & monitoring the performance of team members to ensure efficiency in process operatio ns and
meeting of targets
Creating and sustaining a dynamic environment that fosters development opportunities and motivates high
performance amongst team members
Ensuring regular technical trainings for the field staffs for updating the technical up-gradation
KNOWLEDGE PURVIEW
Possess sound knowledge of handling instruments and Tests like:
BS & W, centrifuge and distillation process ,RVP, Salt in Crude,Dew point.
silica,hydrazine ,phosphate ,iron ,hardness and other analysis
AES SPECTROL, Particle Count & GC
PH, Nitrates, Stabinger Viscometer, Density, FTIR, Flash Point & Pour Point
FTIR for PNA Content in Transformer Oil and UV Spectrometer for Aromatic Content Paraffin Oil
Four Ball Tester for EP Oil, RBOT & OST for Oxidation of Transformer Oil
Foaming Apparatus for Hydraulic Oils
Moisture Content for Transformer Oils
BDV Instrument for Transformer Oils
Resistivity Instrument for Transformer Oils
Karl Fischer Titrator for Transformer Oils
Analytical Ferrography, Metallurgical Microscope And Rotary Particle Depositor to measure iron content and other
wear element
Metrohm Titrator for Water content, TBN & TAN
Semi Automatic Viscometer to check Viscosities of used oil
ORGANISATIONAL EXPERIENCE
2. Nov 14 – Till Date Cairn Energy Ltd,On Contract Basis with Aarvi Encon Pvt Ltd,Barmer,Lab Chemist.
Job Responsibilities,
Crude Oil Analysis,Condensate,Natural Gas,Boiler samples,Polymer and R&D samples testing
and reporting to seniors.
Enter test results in Caliber LIMS system.
To maintain housekeeping of laboratory.
To effectively coordinate with production requirements and time management.
Apr’13 – March 14 Inspectorate INTL Saudi Arabia Ltd., Jubail city as CHEMIST
Key Result Areas
Took care of used oil samples of equipment and engines from customers
Conducted tests to review the reports
Managed test reports, ISO documents and internal & external calibration records
Handled used oil samples of equipments and engines
Developed ISO document and maintaining the worksheets
Aug’10 – Mar’13 Mars Petrochem Pvt. Ltd., MUMBAI as Lab In-charge / Sr.Chemist
Key Result Areas
Developed manufacturing documents and arranged samples for third party analysis registration of customers to
international SIGNUM Laboratory
Downloaded sample labels & reports and submitting the same to the senior management
Highlights
Single handedly managed the entire lab for 2.5 years and performed managerial role
Distinguished efforts in providing methods for advancements of the lab
Jul’06 – Jul 10 APAR INDS LTD, MUMBAI as QC Chemist
Efficiently handled Transformer Oil, White Oil, Hydraulic Oil, Paraffin Oil, Automotive Oil, Grease, Cutting Oil, Pharma
Grade Oil, etc.
Preserved in-process test reports ,ISO documents, NABL documents and SAP Process documents
PROJECT
Title: Lukoil Project
Role: Handled production and quality control documents
CERTIFICATION
Certificate Course In Industrial Chemistry (UGCT)
EDUCATION
2010 MSc. (Chemistry) Correspondence from Madurai Kamaraj University, MUMBAI
2006 B.Sc. (Chemistry) from BIRLA COLLEGE, Mumbai University with 63.17%
2010 PG Diploma in Clinical Research from Sysplex Bio solutions, MUMBAI
2003 12th from Mumbai, Mumbai Board with 62.68%
2001 10th from Mumbai, Mumbai Board with 78%
Other Courses
Computer Course - MS CIT from OMKAR INSTITUTE,KALYAN
PERSONAL DETAILS
Date of Birth: 22nd April, 1985
Address: Arjun Darshan Apartment, 19, Chinchpada Road, Kalyan, East – Mumbai – 421306
Languages Known: English, Hindi, Marathi & Gujarati