1. 1 channel constant current output.
2. 0-10V Dimmer control.
3. Drive capability: max 350mA.
4. Wide range voltage input 100VAC-240VAC
5. Max 8W power
Hao Phuong Company is the distributor of industrial power
and automatic products such as: Fuji Electric, Idec Izumi, Kansai Automation, Circutor, Nichifu, TOGI (Toyogiken)... - www.haophuong.com
1. Single-channel constant current output, selected by Dip-switch
2. Support Leading edge (Triac) and Trailing edge (ELV) dimming
3. Dimming range from 40VAC to 240V AC.
4. Dimming effect smooth, no flicker
5. High efficiency up to 81%.
6. Short current protection
7. Suitable for indoor LED lighting application, such as down light, panel light, and so on
Complete addressable fire alarm and fire components for designing fire security project. Easy fire security solution with all fire security materials alarm panel, smoke alarm, siren strobe, manual call point, heat detector.
1. Analog Signal driver, receive 1-10V dim signal.
2. Single channel output, Max.5A .
3. Input & Output isolated electrically
4. Support active&passive dim signal
5. Support SCP and OCP
Hao Phuong Company is the distributor of industrial power
and automatic products such as: Fuji Electric, Idec Izumi, Kansai Automation, Circutor, Nichifu, TOGI (Toyogiken)... - www.haophuong.com
1. Single-channel constant current output, selected by Dip-switch
2. Support Leading edge (Triac) and Trailing edge (ELV) dimming
3. Dimming range from 40VAC to 240V AC.
4. Dimming effect smooth, no flicker
5. High efficiency up to 81%.
6. Short current protection
7. Suitable for indoor LED lighting application, such as down light, panel light, and so on
Complete addressable fire alarm and fire components for designing fire security project. Easy fire security solution with all fire security materials alarm panel, smoke alarm, siren strobe, manual call point, heat detector.
1. Analog Signal driver, receive 1-10V dim signal.
2. Single channel output, Max.5A .
3. Input & Output isolated electrically
4. Support active&passive dim signal
5. Support SCP and OCP
RunnTech F100 Series Proportional Accelerator PedalRunnTech Controls
RunnTech F100 Proportional Accelerator Pedal is mainly used in hydraulic proportional control and variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars, etc.
Invt Power 3 phase in/out tower UPS, 10kVA, 15kVA, 20kVA, 30kVA, 40kVA. Popularly used for various applications, such as medical devices, electrical devices demanding steady power, precision devices, and schools, banks, enterprices, etc. All the uninterrupted power supplies are applied 3-level technology, 4 breakers, DC breaker optional if battery packs demanded. Apart 15kVA, all this UPS could equip aditional isolated transformer for better protection.
Contact at clark.guo@invt.com.cn
H3CR series multi range analogue timer relayBeite Xu
ALION H3CR series Multi-range analogue timer is a
time-limited type of timer. It have a variety of time
setting ranges and voltages you can choose, it
mainly used for equipment control.
Fast40 -PLAIN-VIEW OPERATOR FOR SWING GATES UP TO 2.3 m (7.5 ft) PER GATE LEAF
Fast40 is suitable for gates fitted on medium to large posts.Thanks to its jointed arm, it can move swing gates measuring up to 2.3 m (7.5 ft) in length, per gate leaf.
Everlast welder offers the best welder equipment at affordable price. Mig welder needs less operating power consumption and you can easily weld small metals. The speed of Mig welding is higher rather than stick welder. @ https://www.everlastwelders.ca/
Rotork Instruments, as part of their Fairchild brand, offers a series of electro-pneumatic pressure controllers that have built in PID closed loop microprocessor control utilizing a remote analog or digital setpoint signal. The electronic controller regulates feed and bleed solenoid valves to control pressure in the signal chamber of the booster section. Outlet pressure is measured and used as a feedback signal to the controller to provide accurate control of the outlet pressure. The device functions as a volume booster and I/P transducer.
Arcraft is the name to turn to for innovative technology. With Plasma Transferred Arc Welding we provide high productivity, high quality of powder deposits and significantly lower cost for hardfacing even in the most challenging area such as valves, valves seat of internal combustion engine, accessories for ship, petroleum and power generation. PTA is also used for reclamation of worn jobs extending the life of components and giving a huge savings on cost.
The WayCon SX200 Draw Wire Sensor is designed for an installation directly in the head of a hydraulic cylinder. The sensor reliably determines the exact position of the
cylinders piston and emits an equivalent output signal by its sensor element. The draw wire mechanics gets installed in the pressurised area whereas the sensor element
(an absolute encoder) is attached at the outside of the cylinder.
The SX200 is particularly suitable for long stroke cylinders and telescope cylinders with pressurized oil filled housings. By giving feed back signals to a machine control unit
it is possible to control the position of a cylinder, to program specific movements, or to manage synchronous movements of several cylinders. Due to its small overall size,
its short assembly time and its possible customisation, this sensor technology is a cost-effective and flexible solution for a wide range of industrial applications.
Close-loop vector control
Inovance MD380 software
Infineon(<37kw)>37KW ) IGBT
Built-in PLC ,PID , AVR function
Torque control can be implemented in the CLVC mode.
Instantaneous power off , inverter keep running
Timing control function
Auto Stand-by and Sleep Mode
Fixed-length control &Torque control mode
RPM Monitoring Feature
Optional parts :Braking unit, I/O extension card, RS485 communication card, PROFIBUS-DP communication card, Differential input PG card, OC input PG card.etc.
RunnTech F100 Series Proportional Accelerator PedalRunnTech Controls
RunnTech F100 Proportional Accelerator Pedal is mainly used in hydraulic proportional control and variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars, etc.
Invt Power 3 phase in/out tower UPS, 10kVA, 15kVA, 20kVA, 30kVA, 40kVA. Popularly used for various applications, such as medical devices, electrical devices demanding steady power, precision devices, and schools, banks, enterprices, etc. All the uninterrupted power supplies are applied 3-level technology, 4 breakers, DC breaker optional if battery packs demanded. Apart 15kVA, all this UPS could equip aditional isolated transformer for better protection.
Contact at clark.guo@invt.com.cn
H3CR series multi range analogue timer relayBeite Xu
ALION H3CR series Multi-range analogue timer is a
time-limited type of timer. It have a variety of time
setting ranges and voltages you can choose, it
mainly used for equipment control.
Fast40 -PLAIN-VIEW OPERATOR FOR SWING GATES UP TO 2.3 m (7.5 ft) PER GATE LEAF
Fast40 is suitable for gates fitted on medium to large posts.Thanks to its jointed arm, it can move swing gates measuring up to 2.3 m (7.5 ft) in length, per gate leaf.
Everlast welder offers the best welder equipment at affordable price. Mig welder needs less operating power consumption and you can easily weld small metals. The speed of Mig welding is higher rather than stick welder. @ https://www.everlastwelders.ca/
Rotork Instruments, as part of their Fairchild brand, offers a series of electro-pneumatic pressure controllers that have built in PID closed loop microprocessor control utilizing a remote analog or digital setpoint signal. The electronic controller regulates feed and bleed solenoid valves to control pressure in the signal chamber of the booster section. Outlet pressure is measured and used as a feedback signal to the controller to provide accurate control of the outlet pressure. The device functions as a volume booster and I/P transducer.
Arcraft is the name to turn to for innovative technology. With Plasma Transferred Arc Welding we provide high productivity, high quality of powder deposits and significantly lower cost for hardfacing even in the most challenging area such as valves, valves seat of internal combustion engine, accessories for ship, petroleum and power generation. PTA is also used for reclamation of worn jobs extending the life of components and giving a huge savings on cost.
The WayCon SX200 Draw Wire Sensor is designed for an installation directly in the head of a hydraulic cylinder. The sensor reliably determines the exact position of the
cylinders piston and emits an equivalent output signal by its sensor element. The draw wire mechanics gets installed in the pressurised area whereas the sensor element
(an absolute encoder) is attached at the outside of the cylinder.
The SX200 is particularly suitable for long stroke cylinders and telescope cylinders with pressurized oil filled housings. By giving feed back signals to a machine control unit
it is possible to control the position of a cylinder, to program specific movements, or to manage synchronous movements of several cylinders. Due to its small overall size,
its short assembly time and its possible customisation, this sensor technology is a cost-effective and flexible solution for a wide range of industrial applications.
Close-loop vector control
Inovance MD380 software
Infineon(<37kw)>37KW ) IGBT
Built-in PLC ,PID , AVR function
Torque control can be implemented in the CLVC mode.
Instantaneous power off , inverter keep running
Timing control function
Auto Stand-by and Sleep Mode
Fixed-length control &Torque control mode
RPM Monitoring Feature
Optional parts :Braking unit, I/O extension card, RS485 communication card, PROFIBUS-DP communication card, Differential input PG card, OC input PG card.etc.