- The INglass Group was founded in 1987 in Italy and designs and manufactures molds for the plastics industry, specializing in car lighting tools. - In 2001 it established its HRSFlow Division for hot runner systems and in 2004 began developing injection-compression technology for automotive panoramic windows. - It now has over 300 employees worldwide, subsidiaries in many countries, and aims to provide a complete support solution to customers in engineering, manufacturing, and production.

1. 1 Complete Support Global REV 1.0

2. INGLASS GROUP: The Company
•1987- The INglass Group, based in San Polo di Piave, was founded as Incos. INglass designs
and manufactures molds for the plastic materials sector.
• 1991- the company began focusing and specializing in multi-colour and multi-component
rotating tools for car lighting (front and rear lights).
• 2001- The HRSFlow Division was set up for the production of hot runner systems
• 2004 - Resources were dedicated to the development of injection-compression technology for
the production of wide panoramic polycarbonate surfaces to replace glass in the automotive
sector (Plastic Glazing).
• 2006 - M.O.M. control units was released on the market to monitor injection molding
processes.
• 2007 - New service that aims to cooling optimization through improvements and solutions in
the mold, with possible use of Selective Laser Melting insert (with conformal waterlines).
2 Complete Support Global REV 1.0

3. INGLASS - HRSFLOW COMPANY
Inglass-HRSflow is a global company
in continuos growing:
• Over 300 employees worldwide.
• Inglass-HRSflow headquarters are
located in San Polo di Piave
(North East Italy). See map on this
page.
• 2009 objectives include further
subsidiaries opening to improve
global service capabilities
3 Complete Support Global REV 1.0

4. INGLASS HRSFlow PRESENCE WORLDWIDE
INGLASS - HRS Russia Opening target 2009 Inglass HRSflow ITALY: – ARGENTINA
Headquarter – AUSTRALIA
INGLASS - HRS Poland Opening target: 2009
Production – BRAZIL
Warehouse
– CHINA
– CZECH REPUBLIC
– FRANCE
– GERMANY
– INDIA
– JAPAN
– KOREA
– MEXICO
– N. AMERICA
– RUSSIA
– SLOVAKIA
Inglass HRSFlow SUBSIDIARIES with: – SLOVENIA
– SPAIN/PORTUGAL
- SALES OFFICE
– SWEDEN
- ENGINEERING OFFICE – TAIWAN
- CUSTOMER SERVICE – TURKEY
– UK
HRS DISTRIBUTORS
Warehouse
4 Complete Support Global REV 1.0

5. TOTAL FORECAST 2009 INGLASS/HRSFLOW TURNOVER
INGLASS trademark HRSFLow trademark
- MOLDS FOR LIGHTING/GLAZING - - HOT RUNNERS –AUTOMATION -
35%
65%
COMPANY TURNOVER EMPLOYEES
DIPENDENTI INGLASS
60 400 FOREIGN
EMPLOYEES
350
50
300
130 HRSFLOW
40
250 109 Italy
35
29 66
30 23 200
17 75
15 150 50 72 INGLASS Italy
20 10
40 215
100
165 174 78
73
10 19 19 19 60
16 17 50
14 INGLASS /
30 40 47 HRSFLOW
- 0 0 Italy
2004 2005 2006 2007 2008 Budget 2009 2004 2005 2006 2007 2008 2009
INGLASS HRSFLOW
YEARS
5 Complete Support Global REV 1.0

6. FINAL CUSTOMERS
6 Complete Support Global REV 1.0

7. FINAL CUSTOMERS – Other sectors
7 Complete Support Global REV 1.0

8. OUR EXPERTISE FOR COMPETITIVE EDGE
8 Complete Support Global REV 1.0

9. SOLUTIONS PROVIDER
9 Complete Support Global REV 1.0

10. A COMPLETE SUPPORT IN THE CUSTOMER CYCLE
10 Complete Support Global REV 1.0

11. CREATING VALUE TO OUR CUSTOMERS
INGLASS - HRS offers added value to the customer chain
HR Mold Car
TIER 1 Maker
supplier maker
HR + mold cooling +
process control new STD CO2 reduction /
consumption, lightweighting
HR + mold cooling +
new technologies
Simple HR supplier
Car Styling + new STD CO2 reduction /
consumption, lightweighting
HRSFlow + INGLASS
GLAZING tech.
VALUE
11 Complete Support Global REV 1.0

12. OUR PRODUCTS : Lighting molds
Inglass HRS is leader worldwide in
Multicolor rotative molds for
automotive lighting applications
12 Complete Support Global REV 1.0

13. OUR PRODUCTS: Glazing Molds
700 mm
15 0 0
H000710.0 H000545.0 mm
BY KIND PERMISSION OF...
13 Complete Support Global REV 1.0

14. OUR PRODUCTS: Hot Runners Systems
PREWIRED SYSTEMS HOT HALVES
For Big parts
For Medium - Small parts
14 Complete Support Global REV 1.0

15. OUR PRODUCTS: Controllers and Automation
ELD – Electronic Leak Detector
Easy-to-use device to
quickly locate any leakage
of plastic material ( or
other liquid) inside the
mold
HRCU- Hot Runner Control Unit
Control Unit for heat
regulation during injection
phase
STC –Sequential Time Control
M.O.M. – Molding Optimization Manager Sequential time control
• Provides thermoregulation in the HR unit for nozzle timing
• Monitors energy consumption
• Manages sequential valve gate opening and closing
15 Complete Support Global REV 1.0

16. HRS –INGLASS : A TOTAL SUPPORT FOR A COMPLETE PROGRAM
PHASE I PHASE II PHASE III
Engineering Supply Production
PHASE I : Engineering supply
Activity Responsabile In coordination with Supervisor
part analysis and definition of critics parts HRS/Inglass TIER ONE TIER ONE
plastic material definition TIER ONE HRS/Inglass TIER ONE
analysis and optimization of criticalities (with cooling, moldflow, warpage…) and defintion of benefits on
HRS/Inglass TIER ONE TIER ONE
cost and quality
Study of application of new/different technologies (Coinjection, Mucell…) and definition of benefits on
HRS/Inglass TIER ONE TIER ONE
cost and quality
parts codesign HRS/Inglass Moldmakers / TIER ONE TIER ONE
Suggestion of moldmakers HRS/Inglass TIER ONE TIER ONE
Analysis of production machines and lines and evaluation of MOM, ELD implementation with definition of
HRS/Inglass TIER ONE TIER ONE
benefits on cost and quality
16 Complete Support Global REV 1.0

17. HRS –INGLASS : A TOTAL SUPPORT FOR A COMPLETE PROGRAM
Phase II : tools and components supply
Activity Responsible In coordination with Supervisor
Supplier definition TIER ONE
Molds design and production Moldmakers HRS/Inglass TIER ONE
Hot Runner design and production HRS/Inglass Moldmakers TIER ONE
Special cooling insert design and production HRS/Inglass Moldmakers / TIER ONE TIER ONE
Lighting molds design and production HRS/Inglass TIER ONE TIER ONE
Eventual Molds Purchasing in China HRS/Inglass TIER ONE TIER ONE
MOM and ELD HRS/Inglass TIER ONE
PHASE III : Try outs and SOP
Activity Responsible In coordination with Supervisor
Presecnce at try out and launch of production HRS/Inglass TIER ONE TIER ONE
Support on injection process set up and optimization HRS/Inglass TIER ONE TIER ONE
Check of part quality and cost and comparison with forecasted values TIER ONE HRS/Inglass TIER ONE
Eventual improvement on cycle/quality TIER ONE HRS/Inglass TIER ONE
17 Complete Support Global REV 1.0

18. PLASTIC TECHNOLOGIES 100%
EXPERIENCE TO CREATE VALUE
- Part cost reduction
- Part quality improvement
- Production efficiency improvement
- Production beackdown reduction
18 Complete Support Global REV 1.0

19. 19 Complete Support Global REV 1.0