(http://www.pravinautoindustrialagency.com/) We offer High Tensile Fastener, Hub Bolt, Hex Bolt, Structural Bolt, Stud Bolt, Metal Washer, Hex Nut, Knurling Bolt, Structural Nuts, Threaded Bolt and many more to our clients.
ICM INDUSTRIES Co., LTD mainly supply camlock coupling, including Aluminum camlock coupling, our material is A 356 for Gravity casting, A 380 for Die casting.
Daily market outlook by Jainam Research - includes indices watch, corporate news, corporate results and action, technical mirror, commodity mirror, and momentum calls status.
ICM INDUSTRIES Co., LTD mainly supply camlock coupling, including Aluminum camlock coupling, our material is A 356 for Gravity casting, A 380 for Die casting.
Daily market outlook by Jainam Research - includes indices watch, corporate news, corporate results and action, technical mirror, commodity mirror, and momentum calls status.
Perf O-grip safety grating has an opening area of at least 37%. These rounded-edge holes are self-cleaning for dry, greasy, muddy, soapy and icy surface conditions and anti-slip in every direction. jack@archro.com
Nifty futures/Bank Nifty futures market closed on 8465 / 18770 . According to technical analysis if Nifty futures
and Bank Nifty future moves up-word in tomorrow treading session then 8512 will be small resistance for Nifty
futures and at the same time 18856 will be small Resistance for Bank Nifty futures, if it break this level then then
Nifty futures can touch 8724 level and Bank Nifty futures can touch 19297 level in next few days.
Nifty futures/Bank Nifty futures market closed on 8465 / 18770 . According to technical analysis if Nifty futures
and Bank Nifty future moves up-word in tomorrow treading session then 8512 will be small resistance for Nifty
futures and at the same time 18856 will be small Resistance for Bank Nifty futures, if it break this level then then
Nifty futures can touch 8724 level and Bank Nifty futures can touch 19297 level in next few days.
Action Plan made for Customer Indian Yamaha Motors on receiving Export complaint form Indonesia.
Part name-Boss buffer which is fitted to weight balancer in the Engine.
Complaint-OD-36.00(-0.03/-0.046mm) Oversize by 0.05mm.
Problem-Fitment issue in the Engine assembly.
Next trading session a close below 11,498 levels shall confirm the short term down trend there by intensifying the selling pressure further which shall eventually lead to the test of 11,340 levels. Resistance levels are placed at 11622 which is all time high for the index.
Vadilal Desai & Co are one of the biggest and leading importer and stockist of Industrial Fasteners since 1942. We have enjoyed goodwill in the market for over 70 years.
Perf O-grip safety grating has an opening area of at least 37%. These rounded-edge holes are self-cleaning for dry, greasy, muddy, soapy and icy surface conditions and anti-slip in every direction. jack@archro.com
Nifty futures/Bank Nifty futures market closed on 8465 / 18770 . According to technical analysis if Nifty futures
and Bank Nifty future moves up-word in tomorrow treading session then 8512 will be small resistance for Nifty
futures and at the same time 18856 will be small Resistance for Bank Nifty futures, if it break this level then then
Nifty futures can touch 8724 level and Bank Nifty futures can touch 19297 level in next few days.
Nifty futures/Bank Nifty futures market closed on 8465 / 18770 . According to technical analysis if Nifty futures
and Bank Nifty future moves up-word in tomorrow treading session then 8512 will be small resistance for Nifty
futures and at the same time 18856 will be small Resistance for Bank Nifty futures, if it break this level then then
Nifty futures can touch 8724 level and Bank Nifty futures can touch 19297 level in next few days.
Action Plan made for Customer Indian Yamaha Motors on receiving Export complaint form Indonesia.
Part name-Boss buffer which is fitted to weight balancer in the Engine.
Complaint-OD-36.00(-0.03/-0.046mm) Oversize by 0.05mm.
Problem-Fitment issue in the Engine assembly.
Next trading session a close below 11,498 levels shall confirm the short term down trend there by intensifying the selling pressure further which shall eventually lead to the test of 11,340 levels. Resistance levels are placed at 11622 which is all time high for the index.
Vadilal Desai & Co are one of the biggest and leading importer and stockist of Industrial Fasteners since 1942. We have enjoyed goodwill in the market for over 70 years.
(www.indiamart.com/konnect-enterprises-delhi) Started in the year 2017, we “Konnect Enterprises” has successfully emerged as a major manufacturer of high-quality Award Memento. Offered products range consists of Winner Trophy, Winning Awards, and Glass Plaque .
(www.indiamart.com/rakshanhomestyles) Established in the year 2000, Rakshan Home Styles is regarded amongst the prominent manufacturers of an unmatched quality array of Multi Layer Storage Systems, Multifunction Steel Baskets, Stainless Steel Baskets and Tableware Cutlery and many more.
(www.indiamart.com/balajitrad-newdelhi) Established in 2017, We Balaji Traders is considered among the prestigious Manufacturer, Wholesaler and Trader of Hydraulic Hinges, Dish Rack, Drawer Racks, Screw and Nails and many more. The whole provided range is developed in line with industry laid standards using qualitative basic materials at our vendors’ end. Besides, the provided furniture is available at economical rates.
Established in 2016, Fusion Enterprises is engaged as a manufacturer, wholesaler, trader and retailer of Water Ionizer, RO Water Purifier, Water ATM Machine, etc. We have taken a challenge to provide 100% pure and healthy water in every household of India. There is need of pure water for every person, the water which is present and accessible for consumption has purification hassles which most purifiers bring with themselves. We have a motive to provide the most pure & healthy water at an affordable price for everyone in India. Under the guidance of our mentor Mr. Gaurav Seth, we have achieved great heights.
Span Filtration Systems Pvt. Ltd. India Pvt. Ltd. is a joint venture company of Span Associates, Pune and Filtermist Overseas Ltd. U.K. formed In 1998. The company has a complete manufacturing setup in Pune. It includes a self competent fabrication shop, Fully equipped assembling and testing area, dynamic balancing facility for Impellers Etc. We are totally self reliant for our manufacturing and marketing activities.
(www.gbtechindia.com) We offer a large variety of office automation office automation system that are exclusively engineered to work efficiently in their specific applications. Our manufactured office automation system are cost effective and stylish in design. Our wide product range includes laminating machines, office binding machines, shredding machine and paper cutter.
(www.tescatech.com) We are a reputed name in the field of exporting an excellent range of Training Equipment and Soldering Stations, Technical training Equipment, Testing Instruments and Digital Soldering Stations such as Embedded Systems, Physics Experiments Set Ups, Digital Panel Meter, Digital Panel, Portable Meters and Digital Soldering Stations. These testing equipment are widely used in different areas like electrical & electronics, laboratories in colleges & schools, research centers, and training institutes. Our product range is well-known for its excellent performance, long working life, easy maintenance and accuracy in results. Our wide product range includes more than 2000 innovative products.
(www.tescatech.com) Established in the year of 2009, we, 'Tesca Technologies Pvt. Ltd.', are well-acknowledged as one of the best manufacturers, traders and exporters of Consumer Electronics Trainer, Microwave Test Branches, Breadboard Trainers, Robotic Kits, Microwave Test Benches and lot more. A wide range of products are offered under this range that includes ,AM / FM Radio Trainer Kit, Oscilloscope / Demonstrator Trainer, Microwave Test Bench-Klystron and many more. These products are manufactured from high-grade material and advanced equipment and machineries. Owing to the features like high performance, durability, accuracy and reliability, these products are widely appreciated by the clients. Apart from this, clients can also avail Website Development Services from us. These services are rendered as per the clients requirements and needs not only this, our organization also offers excellent technical and Marketing Support with all these products.
(www.monoplastics.com) We are amongst the prominent manufacturers and Suppliers of the wide assortment of Poly and HDPE Sheet. These are used by the clients for their perfect performance and lightweight.
(www.simalab.net) SIMA LABS PVT. LTD. incorporated in 1988 , which is professionally managed by technically qualified personnel. We believe in adding little extra to the performance with quality as the commitment.
(www.essarengineers.com) Established in the year 2004, ESSAR ENGINEERS is engaged in manufacturing and wholesaling of Coir Pith Dryer, Bailing Press, Coir Pith Grow Bag Making Machine, Coir Pith Briquetting Machine. These products are extremely admired in the industry owing to their characteristics and low prices.
Under the leadership of our mentor Mr. K. Rajarathinam, we are providing top quality of products. Owing to his commerce experience and deep commerce skill, we have achieved the success in this area in a proficient way.
(www.chemixcalibrationgases.com) We are a reputed organization engaged in manufacturing, supplying and exporting a magnificent range of Gas Mixtures & Handling Equipment. The entire range of products are manufactured using high quality raw material by employing latest technology and machinery. Moreover, we offer these products to the clients at industry leading prices. These products are widely used in several industries and sectors.
(www.arvindfootwear.net) Arvind Footwear Private Limited are an ISO certified organization successfully engaged in manufacturing and exporting a wide array of ISI marked and DGMS certified Industrial Safety Shoes and Safety & PVC gumboots. Our craftsmen design this range of shoes as par the industry set quality parameters using high-grade raw-material sourced from the authorized vendors of the industry. In order to add more clients with us, we are offering this range various size, designs and color to choose from. Clients from various parts widely appreciate this range for their excellent resistance against heat and oil, lightweight, comfortable fitting.
(www.dthdrillingrig.com) Backed by rich industry experience of three decades, we are able to establish ourselves as a leading organization in the field of designing, manufacturing and exporting a wide range of Water Drilling Rigs, Mining Rigs and Equipment. These are known for their high performance & speed, handling capacity, sturdy construction, and energy saving features. Available in both standard and customized specifications, these Rigs and Equipment meet the application requirements of water wells, mineral exploration, core drilling, reverse circulation, and multipurpose drilling.
(www.indiamart.com/spencer-delhi) As Spencer, we are known for importing, exporting and trading an extensive range of Emergency care medical equipment and devices uniting the most advanced aspects of scientific and engineering research
Spencer philosophy finds its roots in the cultural and industrial experience, developed through decades of activity in the rescue field; experience which is correlated with skills that mutually improve each other, taking reliability one from the other and giving birth to a series of innovative and winning ideas.
(www.witcollubricants.com) Witmans Industries Pvt. Ltd. is an ISO 9001:2008 certified business entity engaged in manufacturing, supplying, trading and exporting a comprehensive assortment of Industrial Oil, Greases, Paints and Waxes. Our range is developed in strict accordance with the global quality standards by utilizing premium quality raw material, modern machinery & genuine techniques. Owing to the qualitative fabrications, our range is widely appreciated for high thermal stability, rust, corrosion, wear, foam & moisture resistance and durability.
(www.indiamart.com/bharatdripirrigation) Established in the year 2004, we, “Bharat Drip Irrigation And Agro” started our operations as a Partnership business firm. Since inception, we are engaged in manufacturing, distributing, exporting and supplying a superior quality range of Drip Irrigation Systems & Pipes. Our product range includes Inline Drip Irrigation Pipes, Inline Drip Irrigation, System and Drip Irrigation Lateral Pipes. These products are manufactured using best grade raw material and implementing modern technologies ensuring durability and precise designing. Owing to the design standards, our drip irrigation systems feed the root of the crop with appropriate amount of water and essential minerals. These systems are widely used by farmers because of their maximum output and durability. Our sprinklers are the preferred choice of the people, engaged in various activities related to gardening and farming due to their excellent performance and flexibility.
(www.jayminerals.com) Leveraging on our expertise and experience of mineral industry we have become one of the most reliable and trusted names in mineral industry. We are known for offering good quality industrial minerals like calcite, calcite powder, coated calcite powder, micronized calcite powder & natural calcium carbonate etc which are best in terms of purity, micron sizes and whiteness and are available in different particle size and grades. Our minerals are tested for their physical and chemical properties so that they meet the exact specification of our clients.
(www.paverblock.co.in) We manufacture and supply technologically highly sophisticated range of Paver Blocks and Tiles using qualitative raw material based on latest technology mechanism. These products are extensively used in the national as well as international market. Owing to high compressive strength, these find application in various industries applications. These products include Interlocking Paver Block, Tiles, KERB-Stones, Colored Tiles and Bricks etc. These products are available in various specifications according to the requirements of the clients.
(www.ferroalloy.co.in) We are one of the leading manufacturer, exporter and importer of Minerals such as Ferro Silicon, Low Carbon Ferro Chrome, High Carbon Ferro Chrome, Ferro Silicon Calcium, Calcium Silicide, Cored Wire, Silico Manganese, Ferro Boron, Ferro Nickel, Ferro Titanium, Ferro Niobium, Nickel Plate, Ferro Vanadium, and Inoculants.
Business Valuation Principles for EntrepreneursBen Wann
This insightful presentation is designed to equip entrepreneurs with the essential knowledge and tools needed to accurately value their businesses. Understanding business valuation is crucial for making informed decisions, whether you're seeking investment, planning to sell, or simply want to gauge your company's worth.
As a business owner in Delaware, staying on top of your tax obligations is paramount, especially with the annual deadline for Delaware Franchise Tax looming on March 1. One such obligation is the annual Delaware Franchise Tax, which serves as a crucial requirement for maintaining your company’s legal standing within the state. While the prospect of handling tax matters may seem daunting, rest assured that the process can be straightforward with the right guidance. In this comprehensive guide, we’ll walk you through the steps of filing your Delaware Franchise Tax and provide insights to help you navigate the process effectively.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Unveiling the Secrets How Does Generative AI Work.pdfSam H
At its core, generative artificial intelligence relies on the concept of generative models, which serve as engines that churn out entirely new data resembling their training data. It is like a sculptor who has studied so many forms found in nature and then uses this knowledge to create sculptures from his imagination that have never been seen before anywhere else. If taken to cyberspace, gans work almost the same way.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
Skye Residences | Extended Stay Residences Near Toronto Airportmarketingjdass
Experience unparalleled EXTENDED STAY and comfort at Skye Residences located just minutes from Toronto Airport. Discover sophisticated accommodations tailored for discerning travelers.
Website Link :
https://skyeresidences.com/
https://skyeresidences.com/about-us/
https://skyeresidences.com/gallery/
https://skyeresidences.com/rooms/
https://skyeresidences.com/near-by-attractions/
https://skyeresidences.com/commute/
https://skyeresidences.com/contact/
https://skyeresidences.com/queen-suite-with-sofa-bed/
https://skyeresidences.com/queen-suite-with-sofa-bed-and-balcony/
https://skyeresidences.com/queen-suite-with-sofa-bed-accessible/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-king-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed-accessible/
#Skye Residences Etobicoke, #Skye Residences Near Toronto Airport, #Skye Residences Toronto, #Skye Hotel Toronto, #Skye Hotel Near Toronto Airport, #Hotel Near Toronto Airport, #Near Toronto Airport Accommodation, #Suites Near Toronto Airport, #Etobicoke Suites Near Airport, #Hotel Near Toronto Pearson International Airport, #Toronto Airport Suite Rentals, #Pearson Airport Hotel Suites
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
Putting the SPARK into Virtual Training.pptxCynthia Clay
This 60-minute webinar, sponsored by Adobe, was delivered for the Training Mag Network. It explored the five elements of SPARK: Storytelling, Purpose, Action, Relationships, and Kudos. Knowing how to tell a well-structured story is key to building long-term memory. Stating a clear purpose that doesn't take away from the discovery learning process is critical. Ensuring that people move from theory to practical application is imperative. Creating strong social learning is the key to commitment and engagement. Validating and affirming participants' comments is the way to create a positive learning environment.
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
Taurus Zodiac Sign_ Personality Traits and Sign Dates.pptxmy Pandit
Explore the world of the Taurus zodiac sign. Learn about their stability, determination, and appreciation for beauty. Discover how Taureans' grounded nature and hardworking mindset define their unique personality.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Affordable Stationery Printing Services in Jaipur | Navpack n PrintNavpack & Print
Looking for professional printing services in Jaipur? Navpack n Print offers high-quality and affordable stationery printing for all your business needs. Stand out with custom stationery designs and fast turnaround times. Contact us today for a quote!
Hex Bolt and Nut By Pravin Auto & Industrial Agency LLP
1.
2. 2
Introduction
Caparo is diversified, UK based group,
specializing principally in the Manufacture
& Supply of Steel, Automotive and General
Engineering Products, the group has a grown
as a global entity. The group was founded in
1968 by Lord Paul and since then Caparo is
expanding its business operations in UK,
USA, India, Spain, & Dubai. Caparo group
has grown by setting up new Greenfield
Projects, acquisitions & organic growth
of established business. Caparo has now
envisaged major expansion plans in India
in fields of Fasteners, Stampings, Foundry,
Tubes & Forgings.
Caparo India, the Indian business arm
of Caparo Group, began its operations
in 1994, as a joint venture with India’s
largest car manufacturer— Maruti Udyog.
Today, through its two strategic business
entities, Caparo Engineering India Ltd. and
Caparo Maruti Ltd, the group offers end-
to-end solutions in designing, developing
and manufacturing automotive systems,
assemblies, advanced composites, modules
and components to Indian Automotive
OEMs and Engineering Industry.
Caparo India leverages its exhaustive
capabilities in metal Stamping, Fastening,
Tubing, Forging and Aluminium Foundry
businesses, coupled with its state-of-the-art
Tool Room and R&D Centre, to service top-
notch clients such as GM, Ford, Maruti,
Honda, Tata Motors, Ashok Leyland and
JCB. The company’s ability to offer complete
lifecycle solutions backed by a global
support system, technological superiority
and customer orientation, make it a force to
reckon with in its areas of expertise.
3. CAPARO
ENGINEERING INDIA
LTD
Having started its operation in 2005
from Chopanki (Rajasthan), CAPARO
Engineering India Ltd, is today one of
India’s fastest growing manufacturers
of High Tensile Fasteners.
CEIL’s manufacturing facilities are
housed in a state of the art plant
producing 14000 MT of fasteners
per annum. It has established itself
as a reliable supplier of fasteners to
almost all the Automobile OEMs in
the country and their manufacturing
locations abroad. Today, Caparo is a
strategic source for fasteners to leading
OEMs like Ashok Leyland, Asia
Motor works, Eicher Motors, VECV,
Royal Enfiled, Escorts, Internaional
Tractors, Vibracaustic India Pvt Ltd,
MAN Trucks, PIAGGIO, SML ISUZU,
HMSI, Tata Motors and many more.
Certified for TS 16949, CEIL is a
process driven company. New product
development has been the hallmark
of CEIL. A wide range of products
catering to the automobile industry
and general engineering applications
have been developed at CEIL.
It manufactures standard fasteners
that conform to the International
Standards JIS, Metric, Inch series.
The products manufactured are forged
from cold headed quality medium
carbon steel, alloy steel and stainless
steel.
4. EFFECTIVE FROM 01-01-2018
4
Recommended Retail Prices in Rupees per 100 Pieces Exclusive of GST.
I Specifications: IS-1364, ISO-4014
II Threads fit: IS-4218
III Supply Conditions: IS-1367, ISO-898
IV For Zinc passivated finish the prices will be on enquiry.
V Plating: No guarantee will be given if Caparo Fasteners are plated outside by the dealer/end-user (due to Hydrogen embrittlement).
VI We do not recommend plating on 12.9 Grade fasteners, however if customer insist the same will be on their own risk”
VII Fine pitch bolts / Screws rate will be 5% extra.
VIII Shaded sizes are fully threaded screws.
COLD FORGED HIGH TENSILE PRECISION
HEXAGONAL HEAD BOLTS/SCREWS
METRIC SERIES (M4 TO M24)
GRADE 8.8 & 10.9
Diameter/
Length
M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24
Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench
7 mm 8 mm 10 mm 13 mm 16 mm 18 mm 21 mm 24 mm 27 mm 30 mm 34 mm 36 mm
8
10 261 264 343
12 280 270 363 526
14 302 370 549
16 408 421 365 526 888 1876
18 442 389 495 894
20 410 346 368 460 834 1376 3246
22 376 394 565 951
25 424 363 380 521 892 1486 2373 3246
30 431 394 410 589 968 1493 2547 3406
35 403 440 696 1026 1569 2654 3406 7276
40 435 463 739 1238 1788 2867 3400 6097 6810
45 477 500 794 1437 1959 3088 3621 6371 7129
50 561 536 866 1468 2101 3417 3861 6576 7021 10436 12650
55 588 957 1540 2255 3523 4332 7019 8042 11195 12191
60 646 1067 1679 2362 3686 4539 7263 8138 11620 13263
65 679 1117 1761 2471 3916 4724 7556 8554 12393 14391
70 711 1183 1854 2806 4130 4939 8262 8371 12868 14553
75 755 1230 1983 2883 4252 5377 8618 9319 13344 15092
80 798 1278 2319 3038 4252 6105 8807 9623 13874 16460
85 959 1607 2746 3529 6584 10722 14356 17088
90 932 1726 2567 3267 5034 6515 9414 10258 14839 17715
95 1896 3189 3945 15349 18423
100 2000 2915 3825 5763 6778 10474 10954 15858 19128
110 2787 3361 4239 6509 7548 10997 12117 17236 19908
120 2978 3691 4530 6922 8733 12171 13244 18423 21103
125 3132 4022 4932 0 13645 19434 21583
130 3313 4220 4801 7442 10029 12734 14043 19434 22061
140 3672 4631 5556 9797 10216 13332 15169 20441 23493
150 4121 5051 7858 10748 11997 14257 15187 22423 24480
160 5198 5538 7893 11896 12985 15714 17886 24204 29091
170 5638 5800 9392 14227 17073 20946 0 32097
180 6091 6062 8658 14216 17413 22213 27550 31524
190 7303 0
200 9874 11427 15406 23171 29814 34076
210 13687 0
220 16185 19904 31677 42876 49311
240 16546 21426 33292 46160 51297
250 52032
260 18027 22001 36262 52768
270
280 24202 39241 57871
300 31121 79661
Qty / Box 500 200 100 50 25 10 5
5. GRADE 8.8 & 10.9EFFECTIVE FROM 01-01-2018
5
Recommended Retail Prices in Rupees per 100 Pieces Exclusive of GST.
COLD FORGED HIGH TENSILE PRECISION
HEXAGONAL HEAD BOLTS/SCREWS
METRIC SERIES (M27 TO M42)
GRADE 8.8 & 10.9
I Specifications: IS-1364 ISO-4014/4017, DIN-931/933
II Threads fit: IS-4218
III Supply Conditions: IS-1367, ISO-898
IV For Zinc passivated finish the prices will be on enquiry.
V Shaded sizes are fully threaded screws.
Diameter
Length
27 30 33 36 42
Wrench Wrench Wrench Wrench Wrench
41 mm 46 mm 50 mm 55 mm 65 mm
60 25841 34697
65 26325
70 26443 34697
75 28367 35050 49819
80 29675 36108 52676 61333
85
90 32357 39195 55876 66004 97723
95
100 34998 42180 59835 68664 103339
110 37734 46396 64373 73335 108984
120 38822 47395 65881 74755 109823
125
130 40203 49559 69418 78670 114463
140 42753 52632 73720 83160 120835
150 45283 55588 77944 87063 138927
160 49794 62892 81578 96279 133553
170
180 55079 69260 89327 111649 145686
200 60021 75556 97170 121020 152276
220 83983 91158 117514 145097 195323
240 90570 97574 126179 155550 209820
250
260 101224 104003 135636 165985 224364
270
280 107438 110415 145047 176445 238874
300 112477 121307 154444 211813 253379
Qty / Box 5
9. GRADE 8.8 & 10.9EFFECTIVE FROM 01-01-2018
9
Recommended Retail Prices in Rupees per 100 Pieces Exclusive of GST.
GRADE 12.9
COLD FORGED HIGH TENSILE PRECISION
SOCKET HEAD CAP BOLTS/SCREWS
METRIC SERIES M27 TO M42
1. Specifications : As per ISO 4762/IS : 2269/DIN : 912
2. ISO Metric Threads to 6g Class/IS-4218
3. Mechanical Properties : Confirms to Property class 12.9 grade as per ISO-898
4. Shaded sizes are fully threaded screws.
5. Finish : Black Thermal.
6. We do not recommend plating on 12.9 Grade fasteners, however if customer insist the same will be on their own risk”
Diameter/
Length
27 30 33 36 42
Wrench Wrench Wrench Wrench Wrench
19mm 22mm 24mm 27mm 32mm
60 48664 36289
65
70 39804 39257
75 41826 42066 62187
80 44631 43654 64549 78433
85
90 47770 45891 70060 85633 120597
100 50953 51242 73209 85648 132245
110 54138 54442 77151 90300 135930
120 57323 57641 84218 94197 147837
130 61302 61643 88167 97320 150996
140 63692 64049 93680 107443 163532
150 67680 68059 98908 111317 168288
160 106689 101780 132648 149806 233325
170
180 117838 112519 147243 167380 247600
200 128194 122174 160296 181394 268180
220 159801 152737 198795 224279 336667
240 177071 164243 215590 230448 352308
260 192874 174369 223863 246804 374286
280 205853 185890 236695 263208 397606
300 217179 197012 254562 287460 432959
Qty / Box 5
10. EFFECTIVE FROM 01-01-2018
10
Recommended Retail Prices in Rupees per 100 Pieces Exclusive of GST.
Diameter/
Length
3/16” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1”
Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench
5/32” 3/16” 7/32” 5/16” 3/8” 1/2” 9/16” 9/16” 5/8”
3/8" 476 555
1/2" 477 549 748 1159
5/8" 444 523 678 1209
3/4" 480 549 721 993 3061
7/8" 583 771 1122 3076
1" 536 616 781 1111 2629 5748 14251
1.1/4" 591 696 901 1221 2806 5001 14316
1.1/2" 677 776 1005 1363 2840 5208 12754 20264 18897
1.3/4" 812 951 1193 1629 3052 5508 13100 21386 19038
2" 814 951 1183 1688 3196 5763 13043 21175 20513
2.1/4" 1928 1437 1943 3657 6256 13371 22829 22021
2.1/2" 1983 1447 2029 3867 6322 13309 22918 22021
2.3/4" 2258 1747 2330 4137 6954 15078 25728 24786
3" 2258 1759 2345 4527 7002 15191 25817 24786
3.1/4" 2706 2880 3421 5447 7753 15815
3.1/2" 2706 2891 3511 5397 8074 15729 28549 27394
4" 2981 3452 4110 6310 9498 16608 30199 30342
4.1/2" 5462 5995 7682 10130 20174 35395 33605
5" 6255 7272 9286 11259 21981 38043 36470
5.1/2" 8702 10243 13788 23732 40782 39106
6" 8974 10532 15058 26655 43441 43447
6.1/2" 20043 31777 34466 76180 69876
7" 21040 32054 35384 73777 72470
7.1/2" 21858 33162 36284 76553 75232
8" 22809 35169 37109 78347 77829
8.1/2" 45872 41331 83178
9" 46108 42940 87437
10" 58656
Qty / Box 200 100 50 10 5
“Specifications : Generally conforming to ISO : IS-2269, ISO-4762
Threads : ISO Metric 4g6g IS-4218
Material : High Grade alloy steel.
Mechanical Properties : Property class 12.9 as per IS : 1367, ISO 898 Part-I.
Note : Shaded sizes are fully threaded.”
We do not recommend plating on 12.9 Grade fasteners, however if customer insist the same will be on their own risk”
COLD FORGED HIGH TENSILE PRECISION
SOCKET HEAD CAP BOLTS/SCREWS
INCH SERIES 3/16” TO 1”
GRADE 12.9
11. GRADE 8.8 & 10.9EFFECTIVE FROM 01-01-2018
11
Recommended Retail Prices in Rupees per 100 Pieces Exclusive of GST.
“Specifications : Generally conforming to ISO-7380
Threads : ISO Metric 4g6g IS-4218
Material : High Grade alloy steel.
Mechanical Properties : Property class 12.9 as per IS : 1367, ISO 898 Part-I.
Note : Shaded sizes are fully threaded.”
We do not recommend plating on 12.9 Grade fasteners, however if customer insist the same will be on their own risk”
Diameter/
Length
M3 M4 M5 M6 M8 M10 M12
Wrench Wrench Wrench Wrench Wrench Wrench Wrench
Length 3mm 4mm 5mm 6mm 8mm
6 944 944
8 944 803
10 944 803 626 772 1255
12 1032 841 648 772 1008
16 1063 878 697 832 1064 1726
20 1181 939 751 899 1140 1437 4204
25 992 875 1057 1306 1671 3994
30 1063 1213 1490 1919 4293
35 1360 1375 1694 2198 4755
40 1183 1575 1930 2517 5300
45 1847 2467 3289 5762
50 2151 2657 3669 6313
55 7357
60 7357
Qty / Box 200 100
COLD FORGED HIGH TENSILE PRECISION
SOCKET BUTTON HEAD SCREWS
METRIC SERIES M3 TO M12
12. EFFECTIVE FROM 01-01-2018
12
Recommended Retail Prices in Rupees per 100 Pieces Exclusive of GST.
Diameter/
Length
M3 M4 M5 M6 M8 M10 M12 M16 M20 M24
Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench
2mm 2.5mm 3mm 4mm 5mm 6mm 8mm 10mm 12mm 14mm
6 809
8 956 519 673 587
10 1027 519 465 587
12 1102 552 483 562 763
16 1249 592 518 602 763 1394
20 1396 642 558 676 817 1131 2477
25 1542 749 655 810 938 1317 2197
30 905 792 920 1074 1508 2515 5447
35 1877 1053 1053 1220 1737 2834 5871
40 2008 1642 1653 1390 1989 3141 6288
45 1728 2029 1797 2357 3460 6706
50 1916 2254 2450 2680 3773 7130 14444
55 2923 3569 4084 7547 15094
60 3528 4403 7964 15094 25351
65 8383 15515 27156
70 8800 15752 28058
75 5347 9224 16402 29863
80 9641 22341 31673
90 10537 22741 32570
100 23613 34374
110 29456 40697
120 31661 45311
130 33868 48993
140 51755
150 55437
180 71500
Qty / Box 200 100 50 25
GRADE 12.9
COLD FORGED HIGH TENSILE PRECISION
SOCKET COUNTER SUNK SCREWS
METRIC SERIES M3 TO M24
1. Specification : General conforming to IS : IS-6761
2. Threads : ISO Metric, 4g6g as per IS : IS-4218
3. Material : High Grade alloy steel.
4. Mechanical Properties : Property class 12.9 as per ISO : 898 Part-I.
5. Note : Shaded sizes are fully threaded.”
6. We do not recommend plating on 12.9 Grade fasteners, however if customer insist the same will be on their own risk
13. GRADE 8.8 & 10.9EFFECTIVE FROM 01-01-2018
13
Recommended Retail Prices in Rupees per 100 Pieces Exclusive of GST.
COLD FORGED HIGH TENSILE PRECISION
SOCKET SET SCREWS
M3 TO M12
1. Specifications :IS-6094
2. Threads : ISO Metric, 4g6g as per IS : 4218, ISO 261, ISO 965
3. Material : High grade alloy steel.
4. Mechanical Properties : Property class 45H as per IS : 1367, ISO : 898 Part V.
Diameter/
Length
M3 M4 M5 M6 M8 M10 M12
Wrench Wrench Wrench Wrench Wrench Wrench Wrench
1.5mm 2mm 2.5mm 3mm 4mm 5mm 6mm
3 324
4 328 300
5 328 304 226
6 344 320 232 243
8 373 324 243 264 289 586
10 401 359 264 308 293 403
12 433 386 305 326 365 433 677
16 445 350 417 418 602 813
20 547 400 417 487 664 976
25 689 462 506 580 804 1120
30 690 688 831 1211 1295
35 768 966 1381
40 898 1102 1541
45 1252 1764
50 1396 1923
Qty / Box 500 200
14. EFFECTIVE FROM 01-01-2018
14
Recommended Retail Prices in Rupees per 100 Pieces Exclusive of GST.
SECIFICATIONS
Bolt : Bolt : IS : 3757, Nut: IS: 6623, Washers: IS: 6649
Threads : Bolt : ISO Metric, 6g as per IS : 4218
Nut : ISO Metric, 6H as per IS : 4218
Diameter/
Length
M 16 M 18 M 20 M 22 M 24 M 27 M 30
40 4058
45 4453 7943
50 4663 6474 8450 11718 14593
55 4835 6744 8858 11661 14826
60 5208 7191 9325 12176 15404 32131
65 5482 7579 9839 13621 16755 33636
70 5653 8143 10573 13724 16943 33667
75 6147 8536 10648 14493 18457 35840 41856
80 6742 9270 10804 15035 18722 37428 44208
90 7173 9836 11460 16485 20638 39861 45354
100 7776 10667 12244 16736 22181 42792 48624
110 8165 11564 12712 18019 22561 44529 53181
120 9084 12615 13965 19223 23624 46027 54541
130 10190 14712 15144 20332 24775 47589 55521
140 10499 15159 15961 21333 26056 50436 58674
150 12463 18172 16847 22406 26862 53253 63017
160 13523 19525 19019 25529 31009 58224 69814
170 33389 63755 77258
180 15448 21881 20727 27772 34637 64086 76963
190 23815
200 18290 23652 22993 29360 37340 69595 83971
220 40466 94817
260 57877
NUTS
DIA M 16 M 18 M 20 M 22 M 24 M 27 M 30
List Price 2161 3493 4348 5076 6861 11888 14575
WASHERS
DIA M 16 M 18 M 20 M 22 M 24 M 27 M 30
List Price 1338 1747 1702 2461 2586 4118 5124
COLD FORGED HIGH TENSILE PRECISION
HIGH STRENGTH STRUCTURAL BOLTS
METRIC SERIES M16 TO M30
GRADE 8S & 10S
15. GRADE 8.8 & 10.9EFFECTIVE FROM 01-01-2018
15
Recommended Retail Prices in Rupees per 100 Pieces Exclusive of GST.
SECIFICATIONS
Material: High Grade Alloy Steel.
Specifications: Inch Series: BS:2470, Metric Series: IS:3082, DIN: 911
Mechanical Properties: Hardness-HRC 47 Min.
S No Description
Rate/100
Nos
1 ALLEN KEY M- 1.5 1056
2 ALLEN KEY M- 2 1056
3 ALLEN KEY M- 2.5 1056
4 ALLEN KEY M- 3 1194
5 ALLEN KEY M- 4 1921
6 ALLEN KEY M- 5 2342
7 ALLEN KEY M- 6 3447
8 ALLEN KEY M- 8 6290
9 ALLEN KEY M- 10 10498
10 ALLEN KEY M- 12 19756
11 ALLEN KEY M- 14 29069
12 ALLEN KEY M- 17 45982
13 ALLEN KEY M- 19 63441
14 ALLEN KEY M- 22 100010
15 ALLEN KEY M- 24 134460
16 ALLEN KEY M- 27 226373
17 ALLEN KEY M- 32 398107
S No Description
Rate/100
Nos
1 ALLEN KEY I--1/16 1064
2 ALLEN KEY I--5/64 1156
3 ALLEN KEY I--3/32 1179
4 ALLEN KEY I--1/8 1194
5 ALLEN KEY I--5/32 1447
6 ALLEN KEY I--3/16 1791
7 ALLEN KEY I--7/32 2782
8 ALLEN KEY I--1/4 4024
9 ALLEN KEY I--5/16 6419
10 ALLEN KEY I--3/8 9402
11 ALLEN KEY I--1/2 22818
12 ALLEN KEY I--9/16 25834
13 ALLEN KEY I--5/8 39238
COLD FORGED HIGH TENSILE PRECISION
ALLEN KEY METRIC SERIES M1.5 TO M32 &
INCH SERIES 1/16’’ TO 5/8’’
16. EFFECTIVE FROM 01-01-2018
16
Recommended Retail Prices in Rupees per 100 Pieces Exclusive of GST.
1. Specification : For Nuts with Metric Threads IS-1364, ISO 4032 DIN 970. for nuts with UNC threads : (ANSI B 18.2.2)
2. Threads : ISO Metric, 6g as per IS-4218, ISO 261, ISO 965
3. Material Mechanical Properties : Metric Nuts property class ‘8’ or ‘10’ as tabulated as per IS : 1367, ISO 898, Part-II.
4. For Zinc passivated finish the prices will be on enquiry.
SIZE GRADE PRICE
NUT M6X1 8 133
NUT M8X1.25 8 181
NUT M10X1.5 8 359
NUT M12X1.75 8 579
NUT M12X1.5 GR8 8 573
NUT M12X1.75 GR.10 10 642
NUT M14X1.5 GR8 8 1057
NUT M14X2 10 1108
NUT M16X1.5 / 2 GR8 8 1210
NUT M16X2 10 1469
NUT M18X2.5 10 2114
NUT M20X2.5 10 2803
NUT M22X2.5 10 3205
NUT M24X3 10 4865
NUT M 27X3 10 7781
NUT M 30X3.5 10 11016
NUT M33X3.5 10 14682
NUT M36X4 10 19935
NUT M42X4.5 10 32193
SIZE GRADE PRICE
1/4 UNC 8 171
5/16 UNC 8 237
3/8 UNC 8 353
7/16 UNC 8 665
7/16 BSF R 715
1/2 UNC 8 801
1/2 BSF R 839
5/8 UNC 8 1694
3/4 UNC 8 2987
7/8 UNC 8 3843
1 UNC 8 5736
1/2 BSW R 762
1/2 UNF T 839
HEX NUTS
METRIC SERIES M6 TO M42 &
INCH SERIES 1/4” TO 1”
17. GRADE 8.8 & 10.9
17
Process Details
Hydrogen
Embrittlement Risk
Preventive Action
Degrease
Solvent
Alkali soak
Electro Clean some Only use anodically
De-rust or De-scale
Acid High Use inhibited short time
Alkaline de-rusts Low Poor at de-rusting
Abrasive clean None
Phosphate Acid process Medium Bake – reduces with time
Electro plating Acid type Medium Bake
Electro plating Alkaline type High Bake
HYDROGEN EMBRITTLEMENT
WHAT IS HYDROGEN EMBRITTLEMENT?
When atomic hydrogen enters steel , it can cause a loss in ductility or load carrying ability or cracking (usually as
sub-microscopic cracks), or catastrophic brittle failures at applied stresses well below the yield strength. The Hydrogen
Embrittlement caused failure, the actual breaking of the component into two or more pieces. The fracture is delayed.
Problems occur when least expected. Sometimes it occurs within hours after the tensile load is applied; sometimes
not for months, but seldom years. But when it happens, it’s sudden, with no advance warning or any visible signs of
imminence, Failures occurring in service are serious and costly, sometimes catastrophic.
Hydrogen embrittlement is associated with fasteners made of carbon and alloy steels. It is only usually expected to be a
risk for higher tensile fasteners with hardness above 320HV. It is caused by the absorption of atomic hydrogen into the
fastener’s surface during manufacturing and processing, particularly during acid pickling and alkaline cleaning prior
to plating, and then during actual electroplating. The deposited metallic coating entraps the hydrogen against the base
metal. When load or stress is applied the hydrogen gas migrates towards points of highest stress concentration. Pressure
builds until the strength of the base metal is exceeded and minute ruptures occur. Hydrogen is exceptionally mobile and
quickly penetrates into any recently formed cracks, lesions or material surface discontinuities, which become high stress
areas.
HOW TO MINIMIZE THE RISK OF HYDROGEN EMBRITTLEMENT?
Though the experts recommend various preventive measures, there is no known guaranteed process to eliminate
Hydrogen embrittlement 100%. When embrittlement failures do occur, they will usually only affect 2-3% of the
components. The embrittling process is a random effect, and the de-embrittling process can be regarded similarly.
Whilst prediction is difficult, if the following preventative actions are applied, then the risk should be minimised.
1. Mechanically clean the products if possible.
2. Mechanically plate high strength components.
3. Avoid any embrittling process if possible.
4. Use stringent baking control.
The rapid transfer into the baking oven possibly reduces the opportunity for harmful hydrogen to begin its inward
migration. It is the prevention of inward migration that will reduce the probability of embrittlement failure.
PREVENTATIVE ACTIONS TO REDUCE RISKS IN PLATING.
Last but not the least is to Consider alternative surface coatings like, Geomet, Delta Tone, Delta Seal, Magni, Mechanical Zinc plating.
They will cost more than normal plating.
(Ref: ISO 898: Part XII, ISO 4042 :1999(E), IFI-142-1997)
19. GRADE 8.8 & 10.9EFFECTIVE FROM 01-01-2018
19
SOCKET HEAD CAP SCREW
FIRM FAITH ON CAPARO SOCKET HEAD CAP SCREW
While using Fasteners all are aware the importance of fasteners technology. Higher Pressure higher Stress and
higher Speed demand Strong & reliable joints and its give reliable fasteners only.
This is the reason Industry is using more and more Socket Head Cap Screw. The Strongest threaded fasteners
have the extra strength and fatigue resistance required for complete reliability in high strength fastening.
1. High life Rolled Threads are more uniform and have closer tolerance because CAPARO roll thread dies
and techniques produce smoother surface and better size control. Fully formed radius root run out increase
fatigue life of threads by reducing stress concentration and avoiding sharp corner where failures may start.
2. Socket Depth: - Controlled Socket depth gives optimum wrench engagement, permit full tightening without
cracking.
3. Specially formed Head: - Controlled head forging forms uniform grain flow without crack flow lines. It makes
Head stronger & prevents failure in vital fitted area.
4. Heat Treatment: - Heat Treatment is tailored to suit the specific chemistry of every lot of Steel. Atmosphere
controlled furnace eliminate possibilities of surface carburization or decarburization to ensure maximum
strength and toughness.
SOCKET HEAD CAP SCREW
NOM. THREAD
DIAMETER
M 3 M 4 M 5 M 6 M 8 M 10 M 12 M 14 M 16 M 18 M 20 M 22 M 24 M 27 M 30 M 33 M 36 M 39 M 42
THREAD PITCH 0.5 0.7 0.8 1 1.25 1.5 1.75 2 2 2.5 2.5 2.5 3 3 3.5 3.5 4 4 4.5
HEAD Max. 5.5 7 8.5 10 13 16 18 21 24 27 30 33 36 40 45 50 54 - 63
DIAMETER
D Min. 5.32 6.78 8.28 9.78 12.73 15.73 17.73 20.67 23.67 26.67 29.67 32.61 35.61 39.61 44.61 49.61 53.54 - 62.54
HEAD
HEIGHT
Max. 3 4 5 6 8 10 12 14 16 18 20 22 24 27 30 33 36 - 42
K
Min. 2.86 3.82 4.82 5.70 7.64 9.64 11.57 13.57 15.57 17.57 19.48 21.48 23.48 26.48 29.48 32.38 35.38 - 41.38
Nominal Key Size 2.5 3 4 5 6 8 10 12 14 14 17 17 19 19 22 24 27 - 32
max. 2.58 3.071 4.084 5.084 6.14 8.175 10.127 12.146 14.159 14.212 17.216 17.23 19.275 19.275 22.275 24.275 27.275 - 32.33
S
Min. 2.52 3.02 4.02 5.02 6.02 8.025 10.025 12.032 14.032 14.032 17.05 17.05 19.065 19.065 22.065 24.065 27.065 - 32.08
SOCKET DEPTH 1.3 2 2.5 3 4 5 6 7 8 9 10 11 12 13.5 15.5 18 19 - 24
RADIUS Under
Head
0.1 0.2 0.2 0.25 0.4 0.4 0.6 0.6 06. 0.6 0.8 0.8 0.8 1 1 1 1 - 1.2
20. EFFECTIVE FROM 01-01-2018
20
Measurement styles of Hex Head
MEASUREMENT STYLES OF HEAD
Diameter of all bolts is measured as the outside of major diameter of the thread. The length of a headed bolt
is measured from the largest diameter of the bearing surface of the head to the extreme end of the point in
a line parallel to the axis of the bolt. For example, square or hex head bolts are measured from under the
head to the end of the bolt; a bolt with a countersunk head is measured overall. The point of a bolt is always
included in the measured length. Headless fasteners such as studs are measured overall, including points,
except for continuous-thread alloy studs made to ASTM Specification A193. This type is measured from first
thread to first thread.
21. GRADE 8.8 & 10.9EFFECTIVE FROM 01-01-2018
21
HIGH STRENGTH FRICTION
GRIP BOLTS (STRUCTURAL)
‘Caparo‘ High Strength Friction Grip( Structural) Bolts, Nuts and Washers in Friction Grip Joints.
Bolted joints are one of the most common elements in construction and machine design. They consist of
fasteners that capture and join other parts, and are secured with the mating of screw threads.
There are two main types of bolted joint designs. In one method the bolt is tightened to a calculated clamp
load, usually by applying a measured torque load. The joint will be designed in such a way that the clamp
load is never overcome by the forces acting on the joint (and therefore the joined parts see no relative
motion).
This type of joint design provides several properties:
• Greater preloads in bolted joints reduce the fatigue loading of the fastener.
• For cyclic loads, the fastener is not subjected to the full amplitude of the load; as a result, the fastener’s
fatigue life can be increased or—if the material exhibits an endurance limit—extended indefinitely.
• As long as the external loads on a joint don’t exceed the clamp load, the fastener is not subjected to any
motion and will not come loose, obviating the need for locking mechanisms.
• The other type of bolted joint does not have a designed clamp load but relies on the shear strength of
the bolt shaft. This may include clevis linkages, joints that can move, and joints that rely on a locking
mechanism (like lock washers, thread adhesives, and lock nuts
• The clamp load, also called preload, of a fastener is created when a torque is applied, and is generally a
percentage of the fastener’s proof strength; a fastener is manufactured to various standards that define,
among other things, its strength and clamp load.
• When a fastener is tightened, it is stretched and the parts being fastened are compressed; this can be
modeled as a spring-like assembly that has a non-intuitive distribution of strain. External forces are
designed to act on the fastened parts rather than on the fastener, and as long as the forces acting on the
fastened parts do not exceed the clamp load, the fastener is not subjected to any increased load.
22. 22
• However, this is a simplified model that is only valid when the fastened parts are much stiffer than the
fastener. In reality, the fastener is subjected to a small fraction of the external load even if that external
load does not exceed the clamp load. When the fastened parts are less stiff than the fastener (soft,
compressed gaskets for example), this model breaks down; the fastener is subjected to a load that is the
sum of the pre-load and the external load.
Pre Load=
1000 lbf
A 1000 lbf
Pre-load is
applied to a
scale.
External Load
Removed
A block is
inserted &
the load is
removed. The
Spring Scale is
unaffected.
External Load=
0 – 1000 lbf
Any load may
be applied, up
to the pre-load,
& the spring
scale will not
move, as long as
the block is stiff.
External Load >
1000 lbf
Only when the
external load
exceeds the
pre-load does
the spring scale
move.
This analogy may
be applied to bolted
joints when the
members being
clamped are much
more stiff than the
bolt.
Pic – Rolling of Grip Bolts in a Circular rolling machine.
23. GRADE 8.8 & 10.9
23
GENERALCONDITIONFOR
AppliedtothePriceListNo.08,Effectivefrom1stJan-2018
All enquiries, quotations, orders or contracts are entitled to follow the conditions as per the enclosures given below unless otherwise accepted in
writing by CAPARO Engineering India Ltd (Herein after called the COMPANY).
PRICES
Prices will be charged as per the prevailing price list at the time of dispatch, unless otherwise specially agreed to prices are F.O.R Destination/Chopanki
basis as mutually agreed. Excise duty, educational cess. Sales taxes & other government levies & duties to the purchasers account as per prevailing
norm during the dispatches
LOSS OR DAMAGE
The Company accepts no responsibility once the goods is handed over to the transporters. Company does not own any responsibility for any loss or
damages to the goods during the transit.
PACKAGING
Prices are inclusive of goods in packed cartoons.
PAYMENT
Payment are as per mutually agreed terms & any payment made delay after due date shall attract penal interest as per banking norm.
DELIVERY
All offers for executing orders are from the stock, provided the same is available in ex-stock. For forward delivery, the dates are given without any
assurance & no responsibility is guaranteed by the Company as the delivery failure may arise due to circumstances beyond the Company’s control.
FORCE MAJEURE
The Company shall not be responsible for failure or delay in delivering the goods or any part thereof(or any consequential damages) due to acts of
GOD. enemies of Government of India, Wars, embargo, riots, civil or political disturbances, strikes, lockouts, stoppages of labour, shortages of raw
material and/or labour shortage of motive-power, non availability of shipping spaces or import or export license, breakdown of machinery, restraints
imposed on the company by the Government, municipality or any other cause beyond the Company’s control, such failure/delay shall not entitle the
purchasers to cancel the contract nor is the Company liable to make good any damage arising from such failure to delivery or delay in delivery.
INFRINGEMENT OF PATENT & TRADE MARK
Any ordered goods are manufactured to customer’s drawings or specifications, the responsibilities to ensure theat these do not result in infringement
of any patent or trade mark will lie entirely with the customer’s concerned & customer shall be solely responsible for the consequence in case of any
such infringement.
ACCEPTANCE OR RETURNS
In case of wrong dispatches the customers should intimate to the Company within 15 days of receipt of goods & prior confirmation should be obtained
from the Company in writing before returning the wrong dispatches.
CONFIRMATION
The company shall not be responsible for any order booked by Sales man & agents which is not confirmed by company in writing
GUARANTEE
The company shall undertake the free replacement of goods against defects due to workmanship by the company after returning the defective
products to the company’s premises. But the Company shall not entertain the defective product for free replacement, arises due to improper use/
process or processes at customers end. The Company also accepts no responsibilities for any contingent or resulting liabilities or losses arising
through any defective goods supplied. Any claim for such replacement under this clause will arise only if the material is returned in good condition within
three months from the date of supply. The Company’s decision on the cause for any such defects is final & binding.
CANCELLATION OF ORDERS
The company reserves the right to refuse the cancellation of orders once it has been accepted. Failure on the part of purchaser to accept the delivery
and remit the payment will be considered a breach of contracts & Company is entitled to cancel the contract & proceed legally for recovering the
payment if any.
Supplies shall be made in Blackened / phosphating finish. Other special finishes are at extra cost.
Maximum retail selling prices (Exclusive of GST & other levies as applicable) shall not exceed the printed prices on the cartoon boxes. However the
customer is free to sell the product less than printed prices.
The company will not stand guarantee for socket products above 10.9 grade used in plated condition which has been plated at
customer’s end.
Any dispute or claim arising on or out of, or in connection with quotation, contracts, for supplies by the company shall be referred to the sole Arbitrator
appointed by the Managing Director of the Company and the decision made by such our Arbitrator shall be final & binding on both the parties.