This document is a service manual section describing the removal and installation procedures for the engine and radiator for a New Holland Construction LW 110.B wheel loader. It provides step-by-step instructions for removing the engine by disconnecting electrical and hydraulic connections, attaching lifting equipment, and then installing the new or repaired engine by reversing the removal steps. Safety precautions are described such as releasing pressure from hydraulic and brake systems before removal.
New holland u80 loader landscaper service repair manual instant downloadufdjjskekfkskem
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- Copyright information and publication details
- A table of contents listing the manual sections and corresponding page numbers
- Section indexes providing the titles and numbers of sections within topics like General, Engine, Fuel System, etc.
- Specification details and troubleshooting guides for components like the engine, hydraulics, electrical systems, etc.
- Standard torque specifications for hardware and hydraulic fittings.
New holland u80 loader landscaper service repair manualjjdjfkkskemme
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- Copyright information and publication details
- A table of contents listing the manual sections and corresponding page numbers
- Section indexes providing the titles and numbers of sections within topics like General, Engine, Fuel System, etc.
- Specification details and troubleshooting guides for components like the engine, hydraulics, electrical systems, etc.
- Standard torque specifications for hardware and hydraulic fittings.
New holland u80 loader landscaper service repair manual instant downloadudjjskkemme
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- A table of contents listing the sections and publication numbers for topics like the engine, fuel system, electrical system, etc.
- Section indexes that provide the section numbers for topics within each system (e.g. engine removal, specifications, cooling system).
- Standard torque specifications for decimal and metric hardware, as well as hydraulic fittings.
- Notes about intended use and reservations to make improvements without obligation. Schematics are included in a rear pocket.
New holland u80 loader landscaper service repair manualfjjskkefksme
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- Copyright information and publication details
- A table of contents listing the manual sections and corresponding page numbers
- Section indexes providing the titles and page numbers for sections related to general information, engine, fuel system, electrical systems, steering, power train, brakes, hydraulics, and mounted equipment
- Specification details and torque charts for common hardware sizes
New holland u80 loader landscaper service repair manualfusejfksekmme
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- A table of contents listing the sections and publication numbers for topics like the engine, fuel system, electrical system, etc.
- Section indexes that provide an overview and section numbers for topics within each system (e.g. engine, fuel).
- Specification details and troubleshooting guides for components.
- Standard torque specifications for hardware and hydraulic fittings to assist with repairs.
The manual is intended to provide technicians with information to service and repair the loader. It outlines the various mechanical systems, components, and specifications needed for maintenance and repairs.
New holland u80 loader landscaper service repair manualfusjejfjskekem
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- Copyright information and publication details
- A table of contents listing the manual sections and corresponding page numbers
- Section indexes providing the titles and page numbers for sections related to general information, engine, fuel system, electrical systems, steering, power train, brakes, hydraulics, and mounted equipment
- Specification details and torque charts for engine components, fluids, and hydraulic fittings
The manual provides maintenance technicians with information on removal, installation, specifications, troubleshooting and pressure checks for the loader's various systems and components. Tables of contents and section indexes help technicians quickly navigate to relevant information.
New holland u80 loader landscaper service repair manualfjskekfseik
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- A table of contents listing the sections and publication numbers for topics like the engine, fuel system, electrical system, etc.
- Section indexes that provide an overview and section numbers for topics within each system (e.g. engine removal, specifications).
- Standard torque specifications for decimal and metric hardware, as well as hydraulic fittings.
- Notes that CNH reserves the right to make design changes and the manual contains electric/hydraulic schematics in the rear pocket.
New holland lw170 b wheel loader service repair manualfjskkddmmmse
This document provides a service manual for a CNH America LLC LW 170.B Wheel Loader. It includes:
- Table of contents listing the manual's sections and corresponding page numbers.
- Sections covering general information such as torque specifications, fluids and lubricants, and a metric conversion chart.
- Sections covering specific vehicle systems and components including engines, fuel system, electrical, steering, power train, brakes, hydraulics, and mounted equipment.
- Copyright information for CNH America LLC and notes on the manual's publication and revision dates.
New holland u80 loader landscaper service repair manual instant downloadufdjjskekfkskem
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- Copyright information and publication details
- A table of contents listing the manual sections and corresponding page numbers
- Section indexes providing the titles and numbers of sections within topics like General, Engine, Fuel System, etc.
- Specification details and troubleshooting guides for components like the engine, hydraulics, electrical systems, etc.
- Standard torque specifications for hardware and hydraulic fittings.
New holland u80 loader landscaper service repair manualjjdjfkkskemme
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- Copyright information and publication details
- A table of contents listing the manual sections and corresponding page numbers
- Section indexes providing the titles and numbers of sections within topics like General, Engine, Fuel System, etc.
- Specification details and troubleshooting guides for components like the engine, hydraulics, electrical systems, etc.
- Standard torque specifications for hardware and hydraulic fittings.
New holland u80 loader landscaper service repair manual instant downloadudjjskkemme
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- A table of contents listing the sections and publication numbers for topics like the engine, fuel system, electrical system, etc.
- Section indexes that provide the section numbers for topics within each system (e.g. engine removal, specifications, cooling system).
- Standard torque specifications for decimal and metric hardware, as well as hydraulic fittings.
- Notes about intended use and reservations to make improvements without obligation. Schematics are included in a rear pocket.
New holland u80 loader landscaper service repair manualfjjskkefksme
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- Copyright information and publication details
- A table of contents listing the manual sections and corresponding page numbers
- Section indexes providing the titles and page numbers for sections related to general information, engine, fuel system, electrical systems, steering, power train, brakes, hydraulics, and mounted equipment
- Specification details and torque charts for common hardware sizes
New holland u80 loader landscaper service repair manualfusejfksekmme
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- A table of contents listing the sections and publication numbers for topics like the engine, fuel system, electrical system, etc.
- Section indexes that provide an overview and section numbers for topics within each system (e.g. engine, fuel).
- Specification details and troubleshooting guides for components.
- Standard torque specifications for hardware and hydraulic fittings to assist with repairs.
The manual is intended to provide technicians with information to service and repair the loader. It outlines the various mechanical systems, components, and specifications needed for maintenance and repairs.
New holland u80 loader landscaper service repair manualfusjejfjskekem
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- Copyright information and publication details
- A table of contents listing the manual sections and corresponding page numbers
- Section indexes providing the titles and page numbers for sections related to general information, engine, fuel system, electrical systems, steering, power train, brakes, hydraulics, and mounted equipment
- Specification details and torque charts for engine components, fluids, and hydraulic fittings
The manual provides maintenance technicians with information on removal, installation, specifications, troubleshooting and pressure checks for the loader's various systems and components. Tables of contents and section indexes help technicians quickly navigate to relevant information.
New holland u80 loader landscaper service repair manualfjskekfseik
This document is the service manual for a CNH America LLC U80 Loader Landscaper. It contains:
- A table of contents listing the sections and publication numbers for topics like the engine, fuel system, electrical system, etc.
- Section indexes that provide an overview and section numbers for topics within each system (e.g. engine removal, specifications).
- Standard torque specifications for decimal and metric hardware, as well as hydraulic fittings.
- Notes that CNH reserves the right to make design changes and the manual contains electric/hydraulic schematics in the rear pocket.
New holland lw170 b wheel loader service repair manualfjskkddmmmse
This document provides a service manual for a CNH America LLC LW 170.B Wheel Loader. It includes:
- Table of contents listing the manual's sections and corresponding page numbers.
- Sections covering general information such as torque specifications, fluids and lubricants, and a metric conversion chart.
- Sections covering specific vehicle systems and components including engines, fuel system, electrical, steering, power train, brakes, hydraulics, and mounted equipment.
- Copyright information for CNH America LLC and notes on the manual's publication and revision dates.
New Holland T9.530 Tier 4B (final) Tractor Service Repair Manual.pdffusedkdd9idi
This document contains safety guidelines for operating agricultural tractors and equipment. It outlines general safety rules regarding slopes, passengers, impaired operation, hitching implements, overhead hazards, and more. Personal protective equipment is recommended. Machine components should be inspected before operation and all guards kept in place. Proper shutdown and parking procedures help prevent injury or accidents.
New Holland T9.480 Tier 4B (final) Tractor Service Repair Manual.pdffusedkdd9idi
This document contains safety guidelines for operating agricultural tractors and equipment. It outlines general safety rules regarding slopes, passengers, impaired operation, hitching implements, overhead hazards, and more. Personal protective equipment is recommended. Machine components should be inspected before operation and all guards kept in place. Proper shutdown and parking procedures help prevent injury or accidents.
New Holland T9.435 Tier 4B (final) Tractor Service Repair Manual.pdffusedkdd9idi
This document is a service manual for T9 series tractors that provides information on engine, transmission, axles, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, cab climate control, electrical systems, platform, cab, and decals. It contains sections covering components, systems, and troubleshooting fault codes. The manual is intended to aid technicians in servicing and repairing components of the T9 series tractors.
New Holland T8.420 (CVT) Tractor Service Repair Manual.pdffusedkdd9idi
This document is a service manual for CNH America LLC tractor models T8.275, T8.300, T8.330, T8.360, T8.390, and T8.420. The manual contains sections on the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic system, hitches and implements, steering, cab climate control, electrical systems, platform and cab, and safety information. Each section provides detailed information, specifications, and repair procedures for components and systems of the tractors.
New Holland T5.115 Tractor Service Repair Manual.pdffusedkdd9idi
This service manual section provides specifications for the engines used in CNH T5.95, T5.105, and T5.115 tractors, including details about the number of cylinders, displacement, power output, cooling system, valve timing, and more. The engines are 4-cylinder, turbocharged diesel engines with direct fuel injection that produce between 99 and 114 horsepower.
New Holland T5.105 Electro Command Tractor Service Repair Manual.pdffusedkdd9idi
This service manual provides information for servicing the engine, transmission, axles, brakes, hydraulics and other systems for T5.95, T5.105 and T5.115 Electro Command tractors. It includes specifications, maintenance procedures, troubleshooting and repair instructions. The manual is intended to be used as a reference for technicians working on these tractor models.
New Holland T5.115 Electro Command Tractor Service Repair Manual.pdffusedkdd9idi
This service manual provides information for servicing the engine, transmission, axles, brakes, hydraulics and other systems for T5.95, T5.105 and T5.115 Electro Command tractors. It includes specifications, maintenance procedures, troubleshooting and repair instructions in sections dedicated to the different systems. Fluid types and capacities are also provided to aid in maintenance and repairs.
New Holland T5.95 Tractor Service Repair Manual.pdffusedkdd9idi
This service manual section provides specifications for the engines used in CNH T5.95, T5.105, and T5.115 tractors, including details about the number of cylinders, displacement, power output, cooling system, lubrication system, and other key engine components. It offers technical information on the F5DFL413C*A003, F5DFL413B*A006, and F5DFL413B*A002 engines across various operating parameters.
New Holland T5.105 Tractor Service Repair Manual.pdffusedkdd9idi
This service manual section provides specifications for the engines used in CNH T5.95, T5.105, and T5.115 tractors, including details about the number of cylinders, displacement, power output, cooling system, valve timing, and more. The engines are 4-cylinder, turbocharged diesel engines with direct fuel injection that vary slightly across the tractor models.
New Holland T5.95 Electro Command Tractor Service Repair Manual.pdffusedkdd9idi
This service manual provides information for servicing the engine, transmission, axles, brakes, hydraulics and other systems for T5.95, T5.105 and T5.115 Electro Command tractors. It includes specifications, maintenance procedures, troubleshooting and repair instructions. Fluid types and capacities are listed to aid in maintenance and repairs. The manual is intended to be used by technicians and mechanics in servicing these tractor models.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic pressure before disconnecting hoses and electrical connections.
New Holland W110C Tier 4 Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document provides instructions for removing the engine from a W110C Wheel Loader. Key steps include: parking the machine safely, discharging pressure from hydraulic and brake systems, disconnecting batteries, draining coolant and oil, removing lift cylinders, and using lifting straps to raise the hood and access the engine. A nylon strap is threaded through the exhaust stack to lift the hood and allow removal of attaching components. The level of detail, including diagrams, indicates this is a service manual intended for technicians performing engine removal and installation.
New Holland W300C Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provided is the table of contents, which lists each section number and title. It does not contain any repair or service instructions.
New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab controls, electrical systems, attachments, and other components. Tables provide torque specifications for fasteners in decimal, metric, and hydraulic fitting sections.
New Holland W270C Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, mounted equipment, and schematic foldouts. Sections within each tab provide removal and installation instructions, specifications, troubleshooting procedures, and other repair information for the various components.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, loader attachments, cab, and safety features. Tables provide standard torque specifications for fasteners of different sizes.
New Holland W230C Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document provides instructions for removing the engine from a wheel loader. It outlines 11 steps, which include draining fluids, disconnecting batteries and wiring harnesses, and using lifting straps to raise the hood. The goal is to safely remove the engine while properly marking and draining components to facilitate reinstallation. Key steps include draining the coolant and oil, disconnecting the batteries, and inserting a lifting bar through straps to raise the hood and access additional mounting points.
New Holland W230C Tier 4A (interim) Wheel Loader Service Repair Manual.pdffusedkdd9idi
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual.pdffusedkdd9idi
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Wheel Loader Service Repair Manual.pdffusedkdd9idi
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and installation is the reverse of removal.
New Holland T9.530 Tier 4B (final) Tractor Service Repair Manual.pdffusedkdd9idi
This document contains safety guidelines for operating agricultural tractors and equipment. It outlines general safety rules regarding slopes, passengers, impaired operation, hitching implements, overhead hazards, and more. Personal protective equipment is recommended. Machine components should be inspected before operation and all guards kept in place. Proper shutdown and parking procedures help prevent injury or accidents.
New Holland T9.480 Tier 4B (final) Tractor Service Repair Manual.pdffusedkdd9idi
This document contains safety guidelines for operating agricultural tractors and equipment. It outlines general safety rules regarding slopes, passengers, impaired operation, hitching implements, overhead hazards, and more. Personal protective equipment is recommended. Machine components should be inspected before operation and all guards kept in place. Proper shutdown and parking procedures help prevent injury or accidents.
New Holland T9.435 Tier 4B (final) Tractor Service Repair Manual.pdffusedkdd9idi
This document is a service manual for T9 series tractors that provides information on engine, transmission, axles, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, cab climate control, electrical systems, platform, cab, and decals. It contains sections covering components, systems, and troubleshooting fault codes. The manual is intended to aid technicians in servicing and repairing components of the T9 series tractors.
New Holland T8.420 (CVT) Tractor Service Repair Manual.pdffusedkdd9idi
This document is a service manual for CNH America LLC tractor models T8.275, T8.300, T8.330, T8.360, T8.390, and T8.420. The manual contains sections on the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic system, hitches and implements, steering, cab climate control, electrical systems, platform and cab, and safety information. Each section provides detailed information, specifications, and repair procedures for components and systems of the tractors.
New Holland T5.115 Tractor Service Repair Manual.pdffusedkdd9idi
This service manual section provides specifications for the engines used in CNH T5.95, T5.105, and T5.115 tractors, including details about the number of cylinders, displacement, power output, cooling system, valve timing, and more. The engines are 4-cylinder, turbocharged diesel engines with direct fuel injection that produce between 99 and 114 horsepower.
New Holland T5.105 Electro Command Tractor Service Repair Manual.pdffusedkdd9idi
This service manual provides information for servicing the engine, transmission, axles, brakes, hydraulics and other systems for T5.95, T5.105 and T5.115 Electro Command tractors. It includes specifications, maintenance procedures, troubleshooting and repair instructions. The manual is intended to be used as a reference for technicians working on these tractor models.
New Holland T5.115 Electro Command Tractor Service Repair Manual.pdffusedkdd9idi
This service manual provides information for servicing the engine, transmission, axles, brakes, hydraulics and other systems for T5.95, T5.105 and T5.115 Electro Command tractors. It includes specifications, maintenance procedures, troubleshooting and repair instructions in sections dedicated to the different systems. Fluid types and capacities are also provided to aid in maintenance and repairs.
New Holland T5.95 Tractor Service Repair Manual.pdffusedkdd9idi
This service manual section provides specifications for the engines used in CNH T5.95, T5.105, and T5.115 tractors, including details about the number of cylinders, displacement, power output, cooling system, lubrication system, and other key engine components. It offers technical information on the F5DFL413C*A003, F5DFL413B*A006, and F5DFL413B*A002 engines across various operating parameters.
New Holland T5.105 Tractor Service Repair Manual.pdffusedkdd9idi
This service manual section provides specifications for the engines used in CNH T5.95, T5.105, and T5.115 tractors, including details about the number of cylinders, displacement, power output, cooling system, valve timing, and more. The engines are 4-cylinder, turbocharged diesel engines with direct fuel injection that vary slightly across the tractor models.
New Holland T5.95 Electro Command Tractor Service Repair Manual.pdffusedkdd9idi
This service manual provides information for servicing the engine, transmission, axles, brakes, hydraulics and other systems for T5.95, T5.105 and T5.115 Electro Command tractors. It includes specifications, maintenance procedures, troubleshooting and repair instructions. Fluid types and capacities are listed to aid in maintenance and repairs. The manual is intended to be used by technicians and mechanics in servicing these tractor models.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic pressure before disconnecting hoses and electrical connections.
New Holland W110C Tier 4 Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document provides instructions for removing the engine from a W110C Wheel Loader. Key steps include: parking the machine safely, discharging pressure from hydraulic and brake systems, disconnecting batteries, draining coolant and oil, removing lift cylinders, and using lifting straps to raise the hood and access the engine. A nylon strap is threaded through the exhaust stack to lift the hood and allow removal of attaching components. The level of detail, including diagrams, indicates this is a service manual intended for technicians performing engine removal and installation.
New Holland W300C Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provided is the table of contents, which lists each section number and title. It does not contain any repair or service instructions.
New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab controls, electrical systems, attachments, and other components. Tables provide torque specifications for fasteners in decimal, metric, and hydraulic fitting sections.
New Holland W270C Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, mounted equipment, and schematic foldouts. Sections within each tab provide removal and installation instructions, specifications, troubleshooting procedures, and other repair information for the various components.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, loader attachments, cab, and safety features. Tables provide standard torque specifications for fasteners of different sizes.
New Holland W230C Wheel Loader Service Repair Manual.pdffusedkdd9idi
This document provides instructions for removing the engine from a wheel loader. It outlines 11 steps, which include draining fluids, disconnecting batteries and wiring harnesses, and using lifting straps to raise the hood. The goal is to safely remove the engine while properly marking and draining components to facilitate reinstallation. Key steps include draining the coolant and oil, disconnecting the batteries, and inserting a lifting bar through straps to raise the hood and access additional mounting points.
New Holland W230C Tier 4A (interim) Wheel Loader Service Repair Manual.pdffusedkdd9idi
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual.pdffusedkdd9idi
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Wheel Loader Service Repair Manual.pdffusedkdd9idi
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and installation is the reverse of removal.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
6. 1001-3
Bur 6-49790 Issued 1-04 Printed in U.S.A.
TORQUE SPECIFICATIONS - DECIMAL HARDWARE
Use the torques in this chart when special torques
are not given. These torques apply to fasteners with
both UNC and UNF threads as received from
suppliers dry, or when lubricated with engine oil. Not
applicable if special graphities, Molydisulfide
greases, or other extreme pressure lubricants are
used.
Grade 5 Bolts, Nuts, and Studs
Size
Pound-
Inches
Newton
metres
1/4 inch 108 to 132 12 to 15
5/16 inch 204 to 252 23 to 28
3/8 inch 420 to 504 48 to 57
Size
Pound-
Feet
Newton
metres
7/16 inch 54 to 64 73 to 87
1/2 inch 80 to 96 109 to 130
9/16 inch 110 to 132 149 to 179
5/8 inch 150 to 180 203 to 244
3/4 inch 270 to 324 366 to 439
7/8 inch 400 to 480 542 to 651
1.0 inch 580 to 696 787 to 944
1-1/8 inch 800 to 880 1085 to 1193
1-1/4 inch 1120 to 1240 1519 to 1681
1-3/8 inch 1460 to 1680 1980 to 2278
1-1/2 inch 1940 to 2200 2631 to 2983
Grade 8 Bolts, Nuts, and Studs
Size
Pound-
Inches
Newton
metres
1/4 inch 144 to 180 16 to 20
5/16 inch 288 to 348 33 to 39
3/8 inch 540 to 648 61 to 73
Size
Pound-
Feet
Newton
metres
7/16 inch 70 to 84 95 to 114
1/2 inch 110 to 132 149 to 179
9/16 inch 160 to 192 217 to 260
5/8 inch 220 to 264 298 to 358
3/4 inch 380 to 456 515 to 618
7/8 inch 600 to 720 814 to 976
1.0 inch 900 to 1080 1220 to 1465
1-1/8 inch 1280 to 1440 1736 to 1953
1-1/4 inch 1820 to 2000 2468 to 2712
1-3/8 inch 2380 to 2720 3227 to 3688
1-1/2 inch 3160 to 3560 4285 to 4827
NOTE: Use thick nuts with Grade 8 bolts.
7. 1001-4
Bur 6-49790 Issued 1-04 Printed in U.S.A.
TORQUE SPECIFICATIONS - METRIC HARDWARE
Use the following torques when specifications are not
given.
These values apply to fasteners with coarse threads
as received from supplier, plated or unplated, or
when lubricated with engine oil. These values do not
apply if graphite or Molydisulfide grease or oil is
used.
Grade 12.9 Bolts, Nuts, and Studs
Usually the torque values specified for grade 10.9
fasteners can be used satisfactorily on grade 12.9
fasteners.
Grade 8.8 Bolts, Nuts, and Studs
Size
Pound-
Inches
Newton
metres
M4 24 to 36 3 to 4
M5 60 to 72 7 to 8
M6 96 to 108 11 to 12
M8 228 to 276 26 to 31
M10 456 to 540 52 to 61
Size
Pound-
Feet
Newton
metres
M12 66 to 79 90 to 107
M14 106 to 127 144 to 172
M16 160 to 200 217 to 271
M20 320 to 380 434 to 515
M24 500 to 600 675 to 815
M30 920 to 1100 1250 to 1500
M36 1600 to 1950 2175 to 2600
8.8
Grade 10.9 Bolts, Nuts, and Studs
Size
Pound-
Inches
Newton
metres
M4 36 to 48 4 to 5
M5 84 to 96 9 to 11
M6 132 to 156 15 to 18
M8 324 to 384 37 to 43
Size
Pound-
Feet
Newton
metres
M10 54 to 64 73 to 87
M12 93 to 112 125 to 150
M14 149 to 179 200 to 245
M16 230 to 280 310 to 380
M20 450 to 540 610 to 730
M24 780 to 940 1050 to 1275
M30 1470 to 1770 2000 to 2400
M36 2580 to 3090 3500 to 4200
10.9
12.9
8. 1001-5
Bur 6-49790 Issued 1-04 Printed in U.S.A.
TORQUE SPECIFICATIONS - STEEL HYDRAULIC FITTINGS
Tube OD
Hose ID
Thread
Size
Pound-
Inches
Newton
metres
37 Degree Flare Fitting
1/4 inch
6.4 mm
7/16-20 72 to 144 8 to 16
5/16 inch
7.9 mm
1/2-20 96 to 192 11 to 22
3/8 inch
9.5 mm
9/16-18 120 to 300 14 to 34
1/2 inch
12.7 mm
3/4-16 180 to 504 20 to 57
5/8 inch
15.9 mm
7/8-14 300 to 696 34 to 79
Tube OD
Hose ID
Thread
Size
Pound-
Inches
Newton
metres
3/4 inch
19.0 mm
1-1/16-12 40 to 80 54 to 108
7/8 inch
22.2 mm
1-3/16-12 60 to 100 81 to 135
1.0 inch
25.4 mm
1-5/16-12 75 to 117 102 to 158
1-1/4 inch
31.8 mm
1-5/8-12 125 to 165 169 to 223
1-1/2 inch
38.1 mm
1-7/8-12 210 to 250 285 to 338
Split Flange Mounting Bolts
Size
Pound-
Inches
Newton
metres
5/16-18 180 to 240 20 to 27
3/8-16 240 to 300 27 to 34
7/16-14 420 to 540 47 to 61
Size
Pound-
Feet
Newton
metres
1/2-13 55 to 65 74 to 88
5/8-11 140 to 150 190 to 203
Tube OD
Hose ID
Thread
Size
Pound-
Inches
Newton
metres
Straight Threads with O-ring
1/4 inch
6.4 mm
7/16-20 144 to 228 16 to 26
5/16 inch
7.9 mm
1/2-20 192 to 300 22 to 34
3/8 inch
9.5 mm
9/16-18 300 to 480 34 to 54
1/2 inch
12.7 mm
3/4-16 540 to 804 57 to 91
Tube OD
Hose ID
Thread
Size
Pound-
Inches
Newton
metres
5/8 inch
15.9 mm
7/8-14 58 to 92 79 to 124
3/4 inch
19.0 mm
1-1/16-12 80 to 128 108 to 174
7/8 inch
22.2 mm
1-3/16-12 100 to 160 136 to 216
1.0 inch
25.4 mm
1-5/16-12 117 to 187 159 to 253
1-1/4 inch
31.8 mm
1-5/8-12 165 to 264 224 to 357
1-1/2 inch
38.1 mm
1-7/8-12 250 to 400 339 to 542
10. 2000-3
Bur 6-72470 Issued 10-03 Printed in U.S.A.
ENGINE
Removal
STEP 1
Park machine on a level surface and lower bucket to
floor. Stop engine. Actuate brake pedal several times
to discharge brake accumulators. Move loader
control lever back and forth at least 30 times to
release any pressure from hydraulic circuit.
STEP 2
BD00M030
Put articulation lock in LOCKED position.
STEP 3
Slowly loosen the filler cap for hydraulic reservoir to
release air pressure in hydraulic reservoir.
STEP 4
Put master disconnect switch in OFF position.
STEP 5
Disconnect battery cable from LH battery negative
post. Put a plastic cap over the negative post.
STEP 6
Disconnect battery cable from RH battery positive
post. Put a plastic cap over the positive post.
STEP 7
BD03J111
Open the engine compartment side panel, attach a
lifting eye to the hole in the lower portion of the panel.
STEP 8
BD03J110
Attach lifting straps to the hinge side of the hood,
attach suitable lifting equipment to the straps and
take up slack in the straps.
STEP 9
BD03J112
Disconnect the gas cylinders from the side panel and
hood. Remove hinge pins, remove panel from
machine.
11. 2000-4
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 10
Repeat steps 7 through 9 for the other side panel.
STEP 11
Attach lifting straps to the center hood section.
STEP 12
Connect lifting equipment to the lifting straps. Take
up all slack in strap connected to hood.
STEP 13
BD03J115
Remove two nuts and bolts and four washers
securing the rear of the hood.
STEP 14
BD03J116
Remove the two front bolts and washers securing the
front of the hood.
STEP 15
Carefully raise and remove hood from loader. Lower
hood onto suitable platform and disconnect lifting
equipment.
STEP 16
BC03J056
Remove the four rear grill mounting bolts, remove the
grill. Remove the six rear grill frame mounting bolts
and nuts, remove the frame.
STEP 17
BD03J103
Tag and disconnect engine wiring harness connector
from air filter restriction switch.
12. 2000-5
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 18
BS02J036
Loosen clamp (1) on air cleaner intake hose (2) and
remove intake hose.
STEP 19
Loosen clamps (3 and 5) on crankcase hose (6) and
turbocharger intake hose (8). Disconnect hose (6)
from breather pipe. Disconnect hose (8) with tube (7)
attached from turbocharger.
STEP 20
Support air cleaner assembly (12) and remove two
lock nuts (9), bolts (11), four washers (10). Remove
air cleaner (12) and associated parts as an
assembly.
STEP 21
BC03J132
Remove four bolts (1) and washers (2) securing drive
belt guard (3) to the frame.
1. CLAMP 7. TUBE
2. INTAKE HOSE 8. HOSE
3. CLAMP 9. LOCK NUT
4. HOSE 10. WASHER
5. CLAMP 11. BOLT
6. HOSE 12. AIR CLEANER
2
1
19
3
5
6
5
7
1
12
3
10
9
11
10
8
1. BOLT
2. WASHER
3. DRIVE BELT GUARD
3
1
2
2 1
13. 2000-6
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 22
BC03J131
Remove clamp (1) securing exhaust tube elbow (10)
to muffler (8).
STEP 23
At front of engine, remove two bolts (2) and washers
(3) securing muffler front mounting bracket (6).
STEP 24
Support muffler (8) and brackets (6 and 7) and
remove two bolts (4) and washers (5) at rear of
engine. Remove muffler and brackets as an
assembly from engine.
STEP 25
Loosen clamp (9) and remove exhaust tube elbow
(10) from turbocharger.
STEP 26
BS02J048
Loosen two clamps (1). Remove tube (2) and hose
(3) as an assembly.
STEP 27
Loosen two clamps (5). Remove tube (6) and hose
(7) as an assembly.
STEP 28
BD03J096
Disconnect grounding strap from left side of engine.
1. CLAMP 6. FRONT BRACKET
2. BOLT 7. REAR BRACKET
3. WASHER 8. MUFFLER
4. BOLT 9. CLAMP
5. WASHER 10. EXHAUST TUBE ELBOW
8
6
2
9
10
1
8
7
4
3
5
1. CLAMP 5. CLAMP
2. TUBE 6. TUBE
3. HOSE 7. HOSE
4. CLAMP 8. CLAMP
8
7
6
5
2
3
4
1
5
1
14. 2000-7
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 29
BS02J056
Remove acorn nut (1), nut (2), and washer (3)
securing cover (4) to starter. Remove cover.
STEP 30
Remove nut and washer securing cables to starter
B+ stud (5). Identify, tag, and disconnect both cables.
STEP 31
BS02J055
Identify and tag rear chassis harness wire connected
to starter solenoid terminal. Disconnect rear chassis
harness wire from terminal.
STEP 32
BD03J098
Identify, tag, and disconnect engine harness from
alternator.
STEP 33
Identify, tag, and disconnect connector from engine
coolant temperature sender. Remove bolt and
washer securing cable clamp to engine.
STEP 34
If wheel loader is equipped with air conditioning,
identify, tag, and disconnect connector from air
conditioner compressor clutch. Identify. tag, and
disconnect connector from air conditioning high
pressure switch.
STEP 35
Support air conditioning compressor and remove
bolts securing compressor. Remove compressor and
place on battery cover.
1. ACORN NUT 4. COVER
2. NUT 5. B+ STUD
3. WASHER
5
4
3
2 1
15. 2000-8
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 36
BD03J144
Remove bolts and bracket securing fuel line to rear of
engine.
STEP 37
BD03J145
Remove bolts, nuts and clamps securing wiring
harness to rear of engine.
STEP 38
If equipped, identify, tag, and disconnect wire from
grid heater.
STEP 39
If equipped, identify, tag, and disconnect connector
from fuel filter heater.
STEP 40
If equipped, identify, tag, and disconnect connector
from fuel filter temperature switch.
STEP 41
BD03J089
Disconnect injection pump fuel solenoid and oil
pressure sending unit.
STEP 42
BD03J090
STEP 43
Connect a vacuum pump to hydraulic reservoir. If a
vacuum pump is not available, drain the hydraulic oil
(hydraulic reservoir holds 68.5 liters (18 gallons) of
oil). Turn on vacuum pump (if available). Tag,
disconnect, and plug hoses connected to brake
pump. Plug hoses securely and cap fittings. Turn off
vacuum pump.
16. 2000-9
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 44
BD03J142
Remove bracket mounting hydraulic brake pump
lines and fuel line from bell housing.
STEP 45
BD00M031
Put a 37.8 liter (10 gallon) container below radiator
drain. Remove cap and drain coolant into container.
Install cap after coolant has drained.
STEP 46
BS02J069
Loosen two clamps. Disconnect and remove bottom
hose.
STEP 47
BS02J068
Loosen two clamps (1) securing bleed line hose (2).
Disconnect bleed line hose (2) from fittings.
1. CLAMP 5. HOSE
2. BLEED LINE HOSE 6. PIPE
3. CLAMP 7. TIE STRAP
4. CLAMP 8. HOSE
3
1
6
2
8
1
4
5
4
7
7
17. 2000-10
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 48
Loosen clamps (3 and 4). Disconnect and remove
hose (5) from engine and pipe (6). Disconnect and
remove pipe (6) with bleed line hose (2) attached
from hose (8). If necessary, cut, remove, and discard
tie straps (7) to separate bleed line hose (2) from
pipe (6).
STEP 49
BD00M031
Put a 18.9 liter (5 gallon) container below engine oil
drain. Remove cap and drain engine oil into
container. Install cap after oil has drained.
STEP 50
BS02J065
Disconnect hose from elbow installed in engine oil
pan. Put a plug in hose and a cap on fitting.
STEP 51
BS02J070
Remove nut (1) and washer (2) securing ball joint (3)
to throttle lever (4).
STEP 52
Remove two nuts (5) and washers (6), U-bolt (7), and
clamp (8) securing throttle cable (9) to support
bracket (10). Position throttle cable away from
engine.
STEP 53
BS02J072
1. NUT 6. WASHER
2. WASHER 7. U-BOLT
3. BALL JOINT 8. CLAMP
4. THROTTLE LEVER 9. THROTTLE CABLE
5. NUT 10. SUPPORT BRACKET
1. BOLT 3. FUEL SUPPLY HOSE
2. CLAMP 4. FUEL RETURN HOSE
10
3
2
1
5
6
8
4
7
9
1
2
3
4
18. 2000-11
Bur 6-72470 Issued 10-03 Printed in U.S.A.
Remove bolt (1) and washer securing clamp (2)
holding in-line fuel filter to engine block. Tag and
disconnect fuel supply hose (3) from priming pump.
Plug hose and cap fitting. Tag and disconnect fuel
return hose (4) from fuel injection pump. Plug hose
and cap fitting.
STEP 54
BD01D200
At front of engine, remove six bolts securing drive
shaft to engine coupling. Use a pry bar to move drive
shaft away from engine coupling.
STEP 55
Connect lifting equipment to engine lifting brackets.
Take up all slack in lifting equipment.
STEP 56
BS02J073
Remove nut (1), washer (2), bolt (3), and washer (4)
securing engine and mounting brackets to chassis.
STEP 57
Slowly raise engine from rear chassis. Check and be
sure all harness connections, hoses, and throttle
cable have been disconnected and are positioned
out of the way. Remove engine from machine.
1. NUT 6. ENGINE MOUNT
2. WASHER 7. BOLT
3. BOLT 8. WASHER
4. WASHER 9. MOUNTING BRACKET
5. WASHER
3
4
6
9
8
7
6
2
1
5
19. 2000-12
Bur 6-72470 Issued 10-03 Printed in U.S.A.
Installation
STEP 58
BS02J073
If engine mounting brackets (9) were removed,
position bracket on engine and secure using bolts (7)
and washers (8). Torque bolts to 118 to 130 Nm
(87 to 98 lb-ft). If necessary, install new engine mount
(6) in mounting bracket. Repeat this step to install
remaining engine mounting brackets and engine
mounts as necessary.
STEP 59
Connect suitable lifting equipment to engine lifting
brackets. Slowly raise engine and move into position
over rear chassis. Be sure all harness connections
and hoses are out of the way then lower engine. Put
washer (5) between front engine mount (6) and
chassis. Install washers (4 and 5), bolt (3), washer
(2), and nut (1) in engine front mounts. Lower engine
into position.
STEP 60
Torque bolts (3) to a torque of 244 to 298 Nm
(180 to 220 lb-ft).
STEP 61
Disconnect lifting equipment from engine lifting
brackets.
STEP 62
BD01D200
At front of engine, position drive shaft on engine
coupling. Put Loctite 242 on threads of six bolts.
Install six bolts and tighten to a torque of 53 to 62 Nm
(39 to 46 lb-ft).
STEP 63
BD03J142
Install bracket mounting hydraulic brake pump lines
and fuel line to bell housing.
STEP 64
Turn on vacuum pump connected to hydraulic
reservoir. Remove caps from brake pump fittings and
plugs from brake pump hoses. Connect hoses to
brake pump following tags installed during removal.
Remove and discard tags. Turn off and disconnect
vacuum pump from hydraulic reservoir.
1. NUT 6. ENGINE MOUNT
2. WASHER 7. BOLT
3. BOLT 8. WASHER
4. WASHER 9. MOUNTING BRACKET
5. WASHER
3
4
6
9
8
7
6
2
1
5
141
140
20. 2000-13
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 65
BS02J072
Remove plug from fuel return hose (4) and cap from
fuel injection pump fitting. Connect fuel return hose
to fuel injection pump. Remove plug from fuel supply
hose (3) and cap from priming pump fitting. Connect
fuel supply hose to priming pump. Position clamp (2)
holding in-line fuel filter and secure to engine block
using washer and bolt (1).
STEP 66
BS02J070
Route throttle cable (9) up and over towards fuel
injection pump. Put clamp (8), throttle cable (9), and
U-bolt (7) on support bracket (10) and secure using
two washers (6) and nuts (5).
STEP 67
Install ball joint (3) on throttle lever (4) and secure
using washer (2) and nut (1).
STEP 68
BS02J065
Remove plug from oil drain hose and cap from fitting
installed in engine oil pan. Connect hose to fitting
and tighten.
1. BOLT 3. FUEL SUPPLY HOSE
2. CLAMP 4. FUEL RETURN HOSE
1. NUT 6. WASHER
2. WASHER 7. U-BOLT
3. BALL JOINT 8. CLAMP
4. THROTTLE LEVER 9. THROTTLE CABLE
5. NUT 10. SUPPORT BRACKET
1
2
3
4
10
3
2
1
5
6
8
4
7
9
21. 2000-14
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 69
BS02J068
Put clamp (3) on hose (8). Connect pipe (6) to hose
(8). Position clamp (3) and tighten to a torque of 10.1
to 11.3 Nm (90 to 100 lb-inch). Put clamps (4) on
hose (5). Connect hose (5) to pipe (6) and engine
coolant outlet. Position clamps (4) and tighten to a
torque of 10.1 to 11.3 Nm (90 to 100 lb-inch).
STEP 70
Put hose clamps (1) on bleed line hose (2) and
connect hose to fittings. Position clamps (1) and
tighten to a torque of 10.1 to 11.3 Nm (90 to 100
lb-inch). Install three tie straps (7) to secure bleed
line hose (2) to pipe (6).
STEP 71
BS02J069
Put clamps on hose. Connect hose between bottom
pipe and engine coolant inlet. Position clamps and
tighten to a torque of 10.1 to 11.3 Nm
(90 to 100 lb-inch).
STEP 72
If equipped, position and support air conditioning
compressor on mounting bracket. Secure using bolts
washers.
STEP 73
If wheel loader is equipped with air conditioning,
connect connector to air conditioning compressor
clutch following tag installed during removal. Connect
connector to air conditioning high pressure switch
following tag installed during removal. Remove and
discard tags.
STEP 74
Install drive belt, take up slack in drive belt and
tighten bolts.
1. CLAMP 5. HOSE
2. BLEED LINE HOSE 6. PIPE
3. CLAMP 7. TIE STRAP
4. CLAMP 8. HOSE
3
1
6
2
8
1
4
5
4
7
7
105
105
106
22. 2000-15
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 75
BD03J089
Connect injection pump fuel solenoid and oil
pressure sending unit.
STEP 76
If equipped, connect connector to fuel filter
temperature switch following tag installed during
removal. Remove and discard tag.
STEP 77
If equipped, connect connector to fuel filter heater
following tag installed during removal. Remove and
discard tag.
STEP 78
If equipped, connect wire to grid heater following tag
installed during removal. Remove and discard tag.
STEP 79
Connect connector to engine coolant temperature
sender following tag installed during removal.
Remove and discard tag.
STEP 80
BD03J145
Position clamp holding engine harness on flywheel
housing cover.
STEP 81
BD03J098
Connect wires to alternator.
STEP 82
BS02J055
Connect harness wire to starter solenoid terminal
following tag installed during removal. Remove and
discard tag.
23. 2000-16
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 83
BS02J056
Connect cables to starter B+ stud (5) following tags
installed during removal. Install nut and washer to
secure cables. Remove and discard tags from
cables.
STEP 84
Put cover (4) on starter. Install washer (3), nut (2),
and acorn nut (1) to secure cover (4).
STEP 85
BD03J096
Connect grounding strap from left side of engine.
STEP 86
BS02J048
Install tube (6) and hose (7) as an assembly. Tighten
two clamps (5) to a torque of 10.1 to 11.3 Nm (90 to
100 lbs-inch).
STEP 87
Install tube (2) and hose (3) as an assembly. Tighten
two clamps (1) to a torque of 10.1 to 11.3 Nm (90 to
100 lbs-inch).
1. ACORN NUT 4. COVER
2. NUT 5. B+ STUD
3. WASHER
5
4
3
2 1
1. CLAMP 5. CLAMP
2. TUBE 6. TUBE
3. HOSE 7. HOSE
4. CLAMP 8. CLAMP
8
7
6
5
2
3
4
1
5
1
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. 2000-17
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 88
BC03J131
Put clamp (9) on exhaust tube elbow (10). Install
exhaust tube elbow and clamp on turbocharger. Do
not tighten clamp at this time.
STEP 89
Install and support muffler (8) and brackets (6 and 7)
on engine while connecting muffler to exhaust tube
elbow (10). Install two washers (5) and bolts (4)
finger tight.
STEP 90
At front of engine, install two washers (3) and bolts
(2) to secure muffler front mounting bracket (6).
Tighten bolts (2) to a torque of 118 to 133 Nm (87 to
98 lb-ft). Tighten bolts (4) to a torque of 68 to 77 Nm
(50 to 56 lb-ft).
STEP 91
Install clamp (1). Tighten clamp (1) to a torque of 20
to 25 Nm (15 to 18 lb-ft). Tighten clamp (9) to a
torque of 4.8 to 5.2 Nm (42.5 to 46 lb-ft).
STEP 92
BC03J132
Position drive belt guard (3) and secure using four
washers (2) and bolts (1) to the frame.
1. CLAMP 6. FRONT BRACKET
2. BOLT 7. REAR BRACKET
3. WASHER 8. MUFFLER
4. BOLT 9. CLAMP
5. WASHER 10. EXHAUST TUBE ELBOW
8
6
2
9
10
1
8
7
4
3
5
1. BOLT
2. WASHER
3. DRIVE BELT GUARD
3
1
2
2 1
26. 2000-18
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 93
BS02J036
Position air cleaner assembly (12) and support as an
assembly. Secure using two washers (10), bolts (11)
and lock nuts (9).
STEP 94
Connect turbocharger intake hose (8) attached to
tube (7) to turbocharger and crankcase hose (6) to
breather pipe. Position clamps (3 and 5) and tighten.
Tighten clamps (3) to a torque of 10.1 to 11.3 Nm (90
to 100 lb-inch).
STEP 95
Connect air cleaner intake hose (2) between cooling
frame and air cleaner inlet. Position clamp (1) and
tighten to a torque of 3.6 to 4.5 Nm (32.4 to 39.6
lb-inch).
STEP 96
Remove plastic cap installed over the positive post
during removal. Connect battery cable to RH battery
positive post.
STEP 97
Remove plastic cap installed over the negative post
during removal. Connect battery cable to LH battery
negative post.
STEP 98
BD03J103
Connect engine wiring harness connector to air filter
restriction switch following tag installed during
removal. Remove and discard tag.
STEP 99
BC03J056
Install the frame and secure with six mounting bolts
and nuts. Install the grill and secure with four
mounting bolts.
STEP 100
Carefully raise and position hood onto loader.
1. CLAMP 7. TUBE
2. INTAKE HOSE 8. HOSE
3. CLAMP 9. LOCK NUT
4. HOSE 10. WASHER
5. CLAMP 11. BOLT
6. HOSE 12. AIR CLEANER
2
1
4
3
5
6
5
7
1
12
3
10
9
11
10
8
27. 2000-19
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 101
BD03J116
Install the two front bolts and washers securing the
front of the hood.
STEP 102
BD03J115
Install two nuts and bolts and four washers securing
the rear of the hood.
STEP 103
Place engine compartment side panel into position.
STEP 104
BD03J112
Install hinge pins, connect the gas cylinders to the
side panel and hood.
STEP 105
Repeat steps 103 and 104 for the other side panel.
STEP 106
BD00M031
Check and make sure that drain caps are tight.
STEP 107
Install a new oil filter on engine. Fill engine with 10.5
liters (11 quarts) of New Holland AMBRA engine oil
(SAE 15W-40).
STEP 108
If hydraulic reservoir was drained, fill reservoir with
68.5 liters (18 gallons) of New Holland AMBRA
Hydrosystem 46 fluid.
STEP 109
Fill engine coolant system with a solution of 50%
Ethylene Glycol and 50% water. Cooling system
capacity is 34.1 liters (9 gallons). Install the radiator
cap. Fill the coolant reservoir up to the FULL mark on
the reservoir.
STEP 110
Put master disconnect switch in ON position.
WARNING: Hot coolant can spray out if radiator cap
is removed. To remove radiator cap: Let system cool,
turn to first notch, then wait until all pressure is
released. Scalding can result from fast removal of
radiator cap.
STEP 111
Start engine and run the engine at low idle. Run the
engine at operating temperature for approximately
five minutes to completely mix the Ethylene Glycol
and water. When the coolant is at operating
temperature, stop the engine. When engine has
cooled, check the coolant level at the reservoir.
STEP 112
Lower and close hood side panels.
STEP 113
Put articulation lock in OPERATING position.
28. 2000-20
Bur 6-72470 Issued 10-03 Printed in U.S.A.
RADIATOR
Removal
STEP 114
Park loader on level surface and lower bucket to
ground. Apply parking brake and shut down engine.
STEP 115
BD00M030
Put articulation lock in LOCKED position.
STEP 116
Open and raise hood.
STEP 117
Put master disconnect switch in OFF position.
STEP 118
BD03J102
Remove two bolts and washers securing LH fender.
Remove LH fender.
STEP 119
BD00M031
Put a 37.8 liter (10 gallon) container below radiator
drain. Remove cap and drain coolant into container.
Install cap after coolant has drained.
STEP 120
BD01D188
At top of cooling system frame, loosen two hose
clamps (1). Remove hose (2).
STEP 121
BD01D229
Loosen two clamps securing radiator bottom hose.
Remove bottom hose.
1. HOSE CLAMP 2. HOSE
1
1
2
29. 2000-21
Bur 6-72470 Issued 10-03 Printed in U.S.A.
STEP 122
BD01D223
Remove radiator cap (1) and disconnect overflow
hose (2) from radiator. Install radiator cap. Remove
screw (3) and install lifting eye.
STEP 123
BD01D226
Remove two bolts and lock washers on sides of
radiator. Remove screw and install lifting eye.
STEP 124
BD01D227
Connect lifting equipment to lifting eyes. Take up all
slack in lifting equipment.
STEP 125
BD01D225
Remove four bolts and lock washers securing
radiator to cooling frame. Carefully and slowly raise
radiator from cooling frame and remove from loader.
1. RADIATOR CAP 3. SCREW
2. OVERFLOW HOSE
3
1 2