1. The document presents a simulation software developed to evaluate the control system for an autonomous unmanned helicopter.
2. The simulation models the helicopter dynamics, sensors, and an extended Kalman filter. It accounts for forces like gravity, rotors, wind, and allows tuning the helicopter servos.
3. The goal is to design the guidance system without risking damage to real equipment by testing in simulation first.
Drone (Unmanned aerial vehicle) is an electronic device which is remote controlled based aircraft used to achieve vertical flight with stability using KK2.1.5 board and it can be used for live streaming and also for capturing images using camera and as technology advances increase the performance and reduces the cost of microcontroller so that general public can design their own drone . The main aim of this project is for live streaming and collecting images. This drone includes a frame, flight control board, motors, electronic speed controllers, a transmitter, a receiver, a Lipo battery and a camera interfaced with the kit. Individual components were tested and verified. The tuning and calibration of the PID controller were done to obtain stabilization on each axis. Currently, the drone can properly stabilize itself. The aim of the project has been achieved, resulting in stable and capturing images.
This file contains the matter of fabrication of drones, you can use it to create a drone. This is very useful file for those who are interested in quadcopters or drones. This is written and created by me. You can use as your projetct.
Drone (Unmanned aerial vehicle) is an electronic device which is remote controlled based aircraft used to achieve vertical flight with stability using KK2.1.5 board and it can be used for live streaming and also for capturing images using camera and as technology advances increase the performance and reduces the cost of microcontroller so that general public can design their own drone . The main aim of this project is for live streaming and collecting images. This drone includes a frame, flight control board, motors, electronic speed controllers, a transmitter, a receiver, a Lipo battery and a camera interfaced with the kit. Individual components were tested and verified. The tuning and calibration of the PID controller were done to obtain stabilization on each axis. Currently, the drone can properly stabilize itself. The aim of the project has been achieved, resulting in stable and capturing images.
This file contains the matter of fabrication of drones, you can use it to create a drone. This is very useful file for those who are interested in quadcopters or drones. This is written and created by me. You can use as your projetct.
Drone (Quadcopter) full project report by Er. ASHWANI DIXITAshwani Dixit
This is a Fully completed Mechanical Engineering Final Year Project Report of Drone ( Quadcopter ) by Ashwani Dixit from MITM, Ujjain .
for word file of that report you can contact me - ashwanidixit49@gmail.com
Thankyou !!!!!!!!!
this is about quad-copter component and how we select best for us in this did not analysis about aerodynamics theory and momentum equation. but all basic things are completely explain about quad-copter. circuit diagram also clearly present in this slide. expect all this things applications are describe here
This is a PPT Prepared by Hitesh A H for Engineering Final year Presentation during COVID19 Lock down period,(mid April) for tele-presentation.
University: APJAKTU, Kerala, India
College: Marian Engineering College, Kazhakuttam
Department: Electronics & Communication Engineering
Class of: 2020
Presentors:
Ajishma L Vijayan
Ananthu AS
Hitesh A H
Ashok Babu
Quadcopters are the rotorcraft which have become the catch of the eye in the UAVs, both for electronic hobbyists as well as various application based real time solutions.
1. History of UAVs
2. Drone Market
3. Drone Applications
4. How Quadcopters Work
5. Quad-copter Components
6. Learning to Fly a Drone
Created on Jan 26 2016, Shared on Dec 11 2018.
Drone (Quadcopter) full project report by Er. ASHWANI DIXITAshwani Dixit
This is a Fully completed Mechanical Engineering Final Year Project Report of Drone ( Quadcopter ) by Ashwani Dixit from MITM, Ujjain .
for word file of that report you can contact me - ashwanidixit49@gmail.com
Thankyou !!!!!!!!!
this is about quad-copter component and how we select best for us in this did not analysis about aerodynamics theory and momentum equation. but all basic things are completely explain about quad-copter. circuit diagram also clearly present in this slide. expect all this things applications are describe here
This is a PPT Prepared by Hitesh A H for Engineering Final year Presentation during COVID19 Lock down period,(mid April) for tele-presentation.
University: APJAKTU, Kerala, India
College: Marian Engineering College, Kazhakuttam
Department: Electronics & Communication Engineering
Class of: 2020
Presentors:
Ajishma L Vijayan
Ananthu AS
Hitesh A H
Ashok Babu
Quadcopters are the rotorcraft which have become the catch of the eye in the UAVs, both for electronic hobbyists as well as various application based real time solutions.
1. History of UAVs
2. Drone Market
3. Drone Applications
4. How Quadcopters Work
5. Quad-copter Components
6. Learning to Fly a Drone
Created on Jan 26 2016, Shared on Dec 11 2018.
A Comparison Study between Inferred State-Space and Neural Network Based Syst...Ahmed Momtaz Hosny, PhD
In this paper, system identifications of an unmanned aerial vehicle (UAV) based on inferred state space and multiple neural networks were presented. In this work an optimization approach was used to conclude an inferred state space and the multiple neural networks system identifications based on the genetic algorithms separately. The UAV is a multi-input multi-output (MIMO) nonlinear system. Models for such MIMO system are expected to be adaptive to dynamic behavior and robust to environment.
Modeling and control approach to a distinctive quadrotor helicopterISA Interchange
The referenced quadrotor helicopter in this paper has a unique configuration. It is more complex than commonly used quadrotors because of its inaccurate parameters, unideal symmetrical structure and unknown nonlinear dynamics. A novel method was presented to handle its modeling and control problems in this paper, which adopts a MIMO RBF neural nets-based state-dependent ARX (RBF-ARX) model to represent its nonlinear dynamics, and then a MIMO RBF-ARX model-based global LQR controller is proposed to stabilize the quadrotor's attitude. By comparing with a physical model-based LQR controller and an ARX model-set-based gain scheduling LQR controller, superiority of the MIMO RBF-ARX model-based control approach was confirmed. This successful application verified the validity of the MIMO RBF-ARX modeling method to the quadrotor helicopter with complex nonlinearity.
The reality for companies that are trying to figure out their blogging or content strategy is that there's a lot of content to write beyond just the "buy now" page.
Comparative Study of Indoor Navigation Systems for Autonomous FlightTELKOMNIKA JOURNAL
Recently, Unmanned Aerial Vehicles (UAVs) have attracted the society and researchers due to
the capability to perform in economic, scientific and emergency scenarios, and are being employed in large
number of applications especially during the hostile environments. They can operate autonomously for
both indoor and outdoor applications mainly including search and rescue, manufacturing, forest fire
tracking, remote sensing etc. For both environments, precise localization plays a critical role in order to
achieve high performance flight and interacting with the surrounding objects. However, for indoor areas
with degraded or denied Global Navigation Satellite System (GNSS) situation, it becomes challenging to
control UAV autonomously especially where obstacles are unidentified. A large number of techniques by
using various technologies are proposed to get rid of these limits. This paper provides a comparison of
such existing solutions and technologies available for this purpose with their strengths and limitations.
Further, a summary of current research status with unresolved issues and opportunities is provided that
would provide research directions to the researchers of the similar interests.
Quadcopter (uavs) for border security with gui systemeSAT Journals
Abstract The authors are designing the Quad-copter (UAVs) for Border Security with GUI System. Now-a-days the security issues of borders are daily increasing. Terrorist activities, firing, etc. at border are increasing day by day. Monitoring is becoming more difficult due to weather conditions, difficult areas which are out of reach etc and risk of losing life of soldier is also increasing. Designing an unmanned air vehicle which will monitor the border area, difficult location, movie shooting etc from long distance can be a good option. GPS is used to track the position of intruder or our troops or vehicles. This GPS data will be received by ARM9 processor and conveyed to observer or controller via zigbee. The Quad-copter is controlled by observer via the IR remote. Observer will fly the Quad-copter from a distance to area which has to be monitored. The Audio-Visual will be transmitted to PC via Wireless camera mounted on assembly. Also recording will be done. Keywords: Quadcopter, GPS, Zigbee, Wireless camera, IR remote, Battery, ARM9 processor, GUI
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Design and Structural Analysis for an Autonomous UAV System Consisting of Sla...IOSR Journals
Abstract: An Unmanned Aerial Vehicle (UAV) is an aircraft without a human pilot. It can either be controlled manually by a pilot on the ground using a trans-receiver or it can be programmed to operate autonomously. In this proposed control system, multiple slave Micro Aerial Vehicles(MAV) are dispatched from a master UAV for surveillance. All the MAVs are synchronized with each other through the master UAV which highlights their purpose and position. The master UAV acts as a mobile base for the surveillance, it stores the data collected by the MAVs and transmits them to a remote base. A design of the UAV-MAV system and its performance analysis is presented.
Keywords- Autonomous control, Characteristics, Linux, Master / Slave Aerial Vehicles, NX 8.0 Nastran, Surveillance.
Design and Structural Analysis for an Autonomous UAV System Consisting of Sla...IOSR Journals
An Unmanned Aerial Vehicle (UAV) is an aircraft without a human pilot. It can either be controlled manually by a pilot on the ground using a trans-receiver or it can be programmed to operate autonomously. In this proposed control system, multiple slave Micro Aerial Vehicles(MAV) are dispatched from a master UAV for surveillance. All the MAVs are synchronized with each other through the master UAV which highlights their purpose and position. The master UAV acts as a mobile base for the surveillance, it stores the data collected by the MAVs and transmits them to a remote base. A design of the UAV-MAV system and its performance analysis is presented.
In the past decade Unmanned Aerial Vehicles (UAVs) have become a topic of interest in many research organizations. UAVs are finding applications in various areas ranging from military applications to traffic surveillance. This paper is a survey for a certain kind of UAV called quadrotor or quadcopter. Researchers are frequently choosing quadrotors for their research because a quadrotor can accurately and efficiently perform tasks that would be of high risk for a human pilot to perform. This paper encompasses the dynamic models of a quadrotor and the different model-dependent and model-independent control techniques and their comparison. Recently, focus has shifted to designing autonomous quadrotors. A summary of the various localization and navigation techniques has been given. Lastly, the paper investigates the potential applications of quadrotors and their role in multi-agent systems.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
1. ACCURACY ENHANCEMENT OF UNMANNED HELICOPTER POSITIONING
WITH LOW COST SYSTEM
U. Coppa a, A. Guarnieri b, F. Pirotti b, A. Vettore b
a
Vesuvius Observatory – National Institute of Geophysics and Volcanology - Naples, Italy, coppa@ov.ingv.it
b
CIRGEO – Interdepartment Research Center for Geomatics, University of Padova - Italy, cirgeo@unipd.it
Commission I, Working Group V/1
KEY WORDS: UAV, Model helicopter, Kalman filter, MEMS, Autopilot
ABSTRACT:
In the last years UAV (Unmanned Aerial Vehicle) systems are become very actractive for various commercial, industrial, public,
scientific and military operations. The tasks include pipeline inspection, dam surveillance, photogrammetric survey, infrastructure
maintenance, inspection of flooded areas, fire fighting, terrain monitoring, volcano observations and so on. The impressive flying
capabilities provided by UAVs require a well trained pilot to be fully and effectively exploited; moreover the flight range of the
piloted helicopter is limited to the line-of-sight or the skill of the pilot to detect and follow the orientation of the helicopter. Such
issues have motivated the research and the design for autonomous system guidance which could both stabilize and also guide the
helicopter precisely along a reference path. The constant growth of research programs and the technological progress in the field of
navigation systems, as denoted by the production of more and more performing GPS/INS integrated units, allowed a strong cost
reduction and payload miniaturization, making the design of low cost UAV platforms more feasible and actractive.Small autonomous
helicopters have demonstrated to be a useful platform for a number of airborne-based applications such as aerial mapping and
photography, surveillance (both military and civilian), powerline inspection and agricolture monitoring. In this paper we present the
results of a flight simulation system developed for the setup of the servos which our autonomous guidance system will be based on.
Building a simulated environment allows, indeed, to evaluate in advance what are the main issues of a complex control system,
avoiding to damage fragile and expensive instruments as the ones mounted on a model helicopter.
1. INTRODUCTION components have been already described in (Guarnieri et al,
2006).
In the last years UAV (Unmanned Aerial Vehicle) systems
became very actractive for various commercial, industrial,
public, scientific and military operations. The tasks include 2. SYSTEM OVERVIEW
pipeline inspection, dam surveillance, photogrammetric survey,
infrastructure maintenance, inspection of flooded areas, fire The primary goal of our model helicopter is to provide the user
fighting, terrain monitoring, volcano observations and so on. with a top view of the territory without resorting to more
The name UAV denotes all vehicles, which are flying in the air expensive classical aerial photogrammetry. The system is
with no pilot onboard and with capability for remote controlling designed to collect data for mapping and land monitoring
the aircraft. Within this category, helicopters play an interesting purposes working on areas which represent a difficult task for
role as they are suited for many applications for which fixed- already existing ground-based mobile mapping systems. From
wing aircraft show operational difficulties. Indeed such crafts this viewpoint our system can be regarded as a lightweight and
offer more flexible manouvers, as they allow for vertical take- low cost complementary mapping tool to existing MMS.
off and landing, hovering and side flight. These impressive According to project specifications, the model helicopter will be
flying capabilities require a well trained pilot to be fully and used to survey areas of limited extent such as open mines,
effectively exploited; moreover the flight range of the piloted little rivers, cultivated fields, not only to monitor the land
helicopter is limited to the line-of-sight or the skill of the pilot evolution and local changes in the terrain morphology but also
to detect and follow the orientation of the helicopter. Such to discover illegal uses of land resources. A further example of
issues have motivated the research and the design for its application deals with the mapping of small water channels
autonomous system guidance which could both stabilize and located along the Venice lagoon, which cannot be accurately
also guide the helicopter precisely along a reference path. A mapped through classical aerial photogrammetry. These
number of works have been therefore published about the channels are of great interest for ongoing biological studies of
development of fully autonomous or partially-autonomous the lagoon ecosystem.
helicopters. Small autonomous helicopters have demonstrated to
be a useful platform for a number of aerial applications such as Several kinds of UAV-helicopters have been so far developed
aerial mapping and photography, surveillance (both military for photogrammetric data acquisition and terrain or object
and civilian) and powerline inspection. modeling. For example in (Nagai, 2004) the developed system
integrates laser scanner and CCD-cameras with GPS/INS data
The goal of this paper is to present the results of the simulation for constructing digital surface models. This system uses a
software implemented to evaluate in advance the issues related Subaru helicopter with a payload of 100 kg and diameter of the
with the development of an autonomous control guidance main rotor of 4.8 m. According to the range (3 Km) and altitude
system for our low-cost model helicopter, whose main (2000), the helicopter can be defined as a mini or close range
843
2. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences. Vol. XXXVII. Part B5. Beijing 2008
UAV. In (Sik, 2004) an alternative mini UAV-helicopter is and 3D earth-magnetic data. Main specifications of the MTi-G
presented, which was used as a photogra-phic system for the are reported in table 2.
acquisition of ancient towers and temple sites. The helicopter
should replace high camera tripods and ladder trucks, which are Dimensions 58 x 58 x 33 mm (WxLxH)
uneconomical in cost and time. The helicopter Hirobo & Eagle
90 has a main rotor diameter of 1.8 m of the main rotor and a Weight 68 g
payload capability of 8.5 kg. The helicopter could carry Ambient temperature
-20 … + 55 oC
different camera systems like miniature (35 mm), medium (6 (operating range)
cm x 4.5 cm) and panorama (6 cm x 12 cm) format cameras and Operating voltage 4.5 – 30 V
video cameras. A gimbal was designed as a buffer that can Power consumption 540 mW
absorb noises as well as vibrations. Onboard the system, a small
video camera is installed too, which is connected to the ground
station to transmit the images to a monitor in real time. Table 2. MTi-G technical specifications
Our proposed mapping system differentiates from existing
UAV-helicopters mainly because of the adopted imaging
system and the maximum flying height. Indeed we planned to
employ a model helicopter equipped with GPS, orientation
sensors, two color digital CCD cameras, working in continous
mode, synchronisation devices, data transfer unit and batteries
as power source. In order to keep the system as compact and
lightweight as possible, digital images and positioning data will
be stored on-board on memory cards. Figure 1 shows a close-up
view of our model helicopter, while related technical
specifications are presented in table 1.
Figure 2. The MTi-G by Xsense Technologies.
Different approaches have been evaluated for the helicopter
control system: we found that the better solution, in terms of
complexity, costs and development times, was to mount the
control system onboard. In this way, the need to establish a
bidirectional data communication link between ground station
and helicopter for the whole flight session can be avoided.
However we planned to use a radio link in order to manually
pilot the helicopter during take-off and landing operations.
Figure 1. The model helicopter Raptor 90 v2 Given the size and weight constraints for the guidance system
components, we adopted an 520 MHz X-Scale Mini processor
from RLC Enterprises Inc (figure 3). This unit can be
programmed with C++ language through direct interface with
Fuselage length 1410 mm
the Microsoft Visual Studio suite, allowing us to implement not
Fuselage width 190 mm only the code needed for the helicopter control but also for the
Height 465 mm direct georeferencing of acquired digital images.
Main rotor diameter 1580 mm
Tail rotor diameter 260 mm
Total weight 4.8 kg
Table 1. Main technical specifications of the Raptor 90 v2
All the sensors are mounted on a customized platform fixed
below the helicopter cell between the landing vats. The ima-
ging system is based on a pair of color lightweight digital
cameras (Panasonic), that will be properly placed on the
platform and tilted in order to provide an image overlap
between right and left camera of 70%. The baselength will be
established according to such requirement and the FOV of the
cameras. Position and attitude of the model helicopter will be
provided by a MEMS based Inertial Measurement Unit (IMU)
with integrated GPS and static pressure sensor, the Mti-G from Figure 3. The RLC 520 MHz XScale-Mini processor.
Xsens Technologies (figure 2). This measurement unit has an
onboard Attitude and Heading Reference System (AHRS) and
Navigation processor which runs a real-time Xsens Kalman
Filter providing drift-free GPS positions, 3D orientation data
844
3. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences. Vol. XXXVII. Part B5. Beijing 2008
3. THE SIMULATION ENVIRONMENT
In order to evaluate in advance the main issues related with the As regards the dynamic and kinematic equations two different
development of an autonomous guidance system for our reference systems have been considered: the inertial frame (A)
unmanned model helicopter, we decided to build a simulation and the body (B) frame (figure 5).
software with Simulink, a Matlab programming environment
based on the block scheme algebra. The main goal of this
approach was to define and to tune the set of servos needed for
the helicopter control, avoiding any possible damage of the
system components caused by a trial and error approach in a
real environment. In order to reliably simulate the dynamics of
our small-size helicopter, we took into account the effects of
following components: main rotor, tail rotor, aerodynamic drag
(wind effect) generated by the fuselage, horizontal and vertical
fin. To this aim we considered four main servos: the collective
pitch control, the cyclic stick, the collective stick and the
throttle. The whole block scheme implemented in Simulink is
summarized in figure 4. Here the first block models the Figure 5. The inertial frame (A) and the Body frame (B)
helicopter servos which are input into the second block, the
dynamic model. In turn, this block outputs translational Basically, the analitical model for the helicopter can be
acceleration and angular velocity, related to the body frame, and summarized in following equation system:
position and attitude in the inertial frame, which are then fed
into the measurement sensor block. Here noise is added in order
to better simulate the real behaviour of the GPS, IMU and earth-
magnetic sensors. The output of this block represents the (noisy)
state of the system which is evaluated by an Extended Kalman
Filter (fourth block). Afterthat, the output of the filter is (5)
compared with a reference trajectory in order to determine again
the values fo the servos. This trajectory, acting as the feedback
loop required in every control system, has been generated using
position and attitude information derived by taking into account
helicopter and digital cameras (Field of View) technical
specifications. Each block of figure 4 will be described in the where the first two equations describe the rotational and the
following subsections. translational helicopter dynamics respectively, while the latters
allow to determine respectively the aircraft attitude and position
in the body frame. Such measurements, derived from angular
and translational velocity computed in the inertial frame, are
related to the body frame through rotation matrices Ψ(q) and
R(q). Beside dynamic and kinematic equations, a complete
analitical modeling of the helicopter requires the knowledge
about forces and couples acting on it. After exhaustive reading
of most recent literature on UAV helicopters, we decided to
take into account following forces and couples (figure 6):
Figure 4. Block scheme of the simulation environment. − Gravity force;
− Main rotor;
− Tail rotor;
3.1 The dynamic model − Fuselage;
− Horizontal fin;
The Raptor 90 has been modeled as a 6 degree of freedom (dof) − Vertical fin.
rigid body (3 rotations and 3 translations), whose state is
described by following measurements (see figure 5): For brevity sake, we highlight here that the fuselage has been
− Center of mass position considered as a planar plate subjected to dynamic pressure
(1) along the three axis directions of the body frame. Values of the
three corresponding equivalent surfaces are reported in table 3.
We also took into account wind gust effects (aerodynamic drag),
− Attitude (euler angles) which acts on 3 helicopter components: fuselage, tail plane and
(2) the rudder unit. In this case we did not use any of the existing
models already implemented in Simulink, but rather we
employed three small Slider Gain blocks which allows the user
where φ denotes the roll, θ the pitch and ψ the yaw angle;
to directly modify the simulation by introducing wind gusts by
simply moving three cursors with the mouse.
− Velocity
(3) The helicopter dynamic model block outputs four different
measurements, which are used by the subsequent block for
sensor simulation: translational and angular accelerations in the
− Angular velocity
body frame and position and attitude in the inertial frame.
(4)
845
4. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences. Vol. XXXVII. Part B5. Beijing 2008
position output by the dynamic model block, then a uniformly
distributed noise is added to such measurement to simulate a
real operation. The noise amplitude was set to 10 cm. Again a
Zero Order Hold block was implemented to simulate an update
rate of 4 Hz. For the magnetometer we added a 2 deg uniformly
distributed noise to the orientation measurement returned by the
dynamic model. The magnetometer output was then timely
discretized with a Zero Order Hold block with an update rate of
120 Hz. Technical specifications for the GPS receiver and the
earth-field magnetic sensor are reported in table 4 and 5
respectively.
Figure 6. Block scheme of the simulation environment.
Fuselage
Value (m2) Description
Parameters
Sx 0.10 Equivalent area along x axis
Sy 0.22 Equivalent area along x axis
Sz 0.15 Equivalent area along x axis Table 4. Technical specifications for the GPS receiver.
Table 3. Parameters used for the fuselage modeling.
3.3 The EKF simulation block
In order to properly combine together the data obtained by the
3.2 Simulation of measurement sensors
positioning and orientation sensors integrated in the Mti-G unit,
According with the servos, the four outputs returned by an Extended Kalman filter (EKF) had to be employed. The filter
helicopter dynamic model, according with the input servos, takes as input the following parameters:
were used to simulate the operation of three measurement − Translational acceleration, derived in the body frame from
sensors embedded in the MTi-G unit: the IMU platform, the IMU accelerometers;
GPS receiver and the 3-axis magnetometer.
As regards the first sensor, input parameters are represented by
the translational acceleration and the angular velocity in the
body frame as derived from the solution of the first two
equations shown in (5).To better simulate the behaviour of a
real attitude sensor we added a uniformly distributed noise,
whose amplitude has been calculated as product between the
noise density and the square root of the sensor bandwith.
Corresponding values were obtained by the IMU specifications
reported in table 4. Moreover, the update rates were simulated
by using Zero Order Hold blocks, i.e. Simulink components
able to hold the signal for a certain amount of time. In this case Table 5. Specifications for the magnetic sensor.
the update rate was set to 200 Hz.
− Angular velocity as measured in the body frame by the IMU
gyros;
− Inertial position provided by the GPS receiver;
− Attitude measurements provided by the magnetometer.
Obviously all these data are considered noisy as mentioned in
the previous subsection.
In our filter implementation the state equation is described as
follows:
(6)
Table 3. Specifications for the IMU accelerometers and gyros.
while the measurement equation is:
A similar approach was adopted even for the GPS receiver and
the magnetometer. The GPS sub-block takes as input the inertial (7)
846
5. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences. Vol. XXXVII. Part B5. Beijing 2008
helicopter guidance control trough step-by-step comparison
The state vector at time step k (sk) ensambles four variables with a reference trajectory. To properly design this flight path
related to the inertial frame: position, orientation, translational we developed an algorithm in Matlab based on following
velocity and angular velocity. assumptions:
For brevity sake we report here just the equations we used for 1) The mapping area should have a rectangular shape;
the translational dynamic (eq. 8), the rotational dynamic (eq. 9) 2) Vertex coordinates of the rectangle were defined in the
and for the state measurements (eq. 10-13). inertial frame;
3) The trajectory should be automatically generated once the
four vertex of the rectangle were known;
4) Trajectory had to stop at the same helicopter starting
position;
5) Digital images had to be captured in hovering mode, i.e.
while the helicopter is kept stationary;
6) Stop points should be chosen in such a way to ensure
enough side and along path image overlap, according to
user requirements;
(8)
7) Trajectory should be designed taking into account the use of
a pair of digital cameras acquiring simoultaneously, their
Field of View and their tilting with respect to the vertical.
In order to meet all these requirements, our trajectory
generating algorithm requires a set of input parameters
describing the size of the mapping area, the helicopter’s
geometry and the digital camera pair mounting. Here we recall
just the most important ones: helicopter starting position,
operating height (20 m), stop time (10 s), average translational
velocity (0.5 m/s), vertex coordinates of the rectangular area,
(9) along-path overlap (2 m), side overlap (3 m) and FOV.
Figure 6 shows an example of a reference trajectory generated
with the implemented algorithm. Red points represent the stop
points for image capture in hovering mode.
(10)
where IBR denotes the rotation matrix converting attitude and
position data from the Body frame to the Inertial frame.
(11)
Figure 6. Example of the reference trajectory.
(12) 4. TEST & RESULTS
For the test we set an average velocity of 0.5 m per second,
though this not very high speed when compared with the typical
performance of acrobatic helicopters, however it fits well in the
case of automatically controlled flight. The designed trajectory
(13) has been used as a reference for the control loop (see figure 4),
which we implemented as a MIMO (multiple input multiple
output) system generating the four servos needed to control the
flight path according to the values of the six variables
describing helicopter’s position and attitude in 3D space.
3.4 The reference trajectory Figures 7 shows the helicopter position on the reference
trajectory along the x axis: horizontal steps correspond to the
In the previous subsections the set of Simulink blocks we used red points in figure 6 (stop positions), while vertical steps
to model different aspects of our helicopter fligth (dynamics, denote helicopter motion in between. As shown in figure 8, the
state measurements and Kalman filetring) has been presented. range of the yaw angle computed for the same trajectory lies
All related information have been then employed to get the between -90 and +90 degrees. These wide angle variations are
847
6. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences. Vol. XXXVII. Part B5. Beijing 2008
needed to scan the whole area displayed in figure 6. Both
measurements are computed in the inertial frame.
Figure 11. Roll angle: reference, state, measurements and EKF
output.
Figure 7. Helicopter position along inertial frame x axis.
Finally figures 12 and 13 shows an example of the trajectory
tracked in Simulink by the control system in terms of the
inertial position along the x axis and of the yaw angle for the
first 400 seconds of simulation. The time shift for both curves
with respect the theoretical ones is due to a typical side effect of
control systems based on filtered measurements. Here both
curves (in red) are time delayed by 1 second. Achieved results
show that during a scan line (figure 6), our model helicopter
would shift correctly along the y axis but the yaw angle tends to
produce a translational components even along the x axis.
However in this case major displacements occur during motion
between stop points: here the control loop correctly moves the
helicopter on the reference trajectory so that the image capture
position is very nearly to the reference one.
In order to evaluate the performance of implemented control
Figure 8. Helicopter yaw angle along the reference trajectory.
system we computed the RMS error for all the 6 variables
defining the helicopter position and attitude, that is:
Figure 9 displays in green color the GPS position, computed
along the x axis, returned by the measuring sensor block on the
first 100 seconds of simulation. These noisy measurement is
compared with the values of the reference trajectory (blue lines)
and with those representing the current state as output by the
helicopter dynamic model (noiseless). Then in figure 10 the
output of the EKF for the roll angle is shown overimposed on
similar data. Therefore this figure summarizes the whole block
scheme developed for the autonomous control of our model
helicopter. The blue line represents the reference trajectory, the
red curve is the current UAV state (for the roll angle) which is
undirectly “seen” by the control system through the noisy
measurements output by the Mti-G unit, shown in green. The
latter are entered in the Kalman filter in order to obtain a better
tracking (light blue line) of the reference trajectory.
Figure 12. Actual and reference trajectory along the x-axis
component of helicopter motion.
Figure 9. GPS position along x axis with added noise.
848
7. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences. Vol. XXXVII. Part B5. Beijing 2008
of an autonomous guidance system to be applied to a model
helicopter. This small-size UAV is a low-cost MMS designed
for the collection of directly georeferenced color digital images,
while flying at low altitude over areas of limited extent. After
photogrammetric processing, such images will be used to
produce DEMS, orthophotos and other kind of GIS data which
can be used fo several purposes related to land management.
Given the capability of surveying areas of limited access, the
proposed model helicopter can be regarded as a complementary
mapping tool of already existing and well proven ground-based
mobile mapping systems.
REFERENCES
Figure 13. Roll angle tracked by the control system wrt. The
reference trajectory. Eck, Ch., 2001. Navigation Algorithms with applications to
unmanned helicopters. Dissertation at the Swiss federal institute
From this computation we achieved following results: of technology Zurich.
Gelb A., 1984. Applied optimal estimation. The MIT Press.
Guarnieri, A., Vettore, A., Pirotti, F., 2006. Project for an
autonomous model helicopter navigation system Proc. of
ISPRS Commission I Symposium, “From Sensors to imagery”,
Marne La Vallee, Paris, 4-6 July.
Nagai, M., Shibasaki, R., Manandhar, D., Zhao, H., 2004.
Development of digital surface and feature extraction by
integrating laser scanner and CCD sensor with IMU. Istanbul.
IAPRS, Vol. XXXV, Part B5.
Table 6. Simulation results. Sik J. H. , Chool L. J., Sik K. M., Joon K. I., Kyum K.V., 2004.
Construction of National Cultural Heritage Management
System using Rc Helicopter Photographic Surveying System.
5. CONCLUSIONS Istanbul, XXth ISPRS Congress.
In this paper we have presented the results of a control system
developed in Matlab Simulink, aimed to simulate the behaviour
849
8. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences. Vol. XXXVII. Part B5. Beijing 2008
850