Harsha - 424.pptx
•Download as PPTX, PDF•
0 likes•2 views
The document discusses International Mobile Equipment Identity (IMEI) numbers, which are 15-digit unique codes embedded in mobile phones that are used to identify devices and block calls from unauthorized users. It also describes small base stations that include transceiver sections operating at 900MHz frequencies, with oscillator circuits that define the frequency range and require cooling. Antennas are also discussed as devices that transmit and receive data signals at specified frequencies and are used to show radiation patterns.
Report
Share
Report
Share
Recommended
Snifferfordetectinglostmobile 130811054537-phpapp01
The document discusses a sniffer device that can help locate a lost mobile phone. It consists of a small base station with a unidirectional antenna and tracking software. The sniffer acts as a base transceiver station, communicating with the mobile telephone switching office to detect the lost phone's unique IMEI number when it is turned on within range. Some key advantages are that it is useful for finding lost mobiles, has effective low cost and power consumption, and is easy to design. The method could be improved with modern technology.
Sniffer for detecting lost mobile ppt
The document discusses a sniffer device that can help locate a lost mobile phone. The sniffer works by acting as a small mobile base station with a unidirectional antenna and tracking software. It detects the lost phone's unique IMEI number and increases its transmission frequency to communicate with the phone. Some key advantages are that it is useful for finding lost mobiles, has low cost and power consumption, and is easy to design. The method could be improved with modern technology.
1804 car vip protection
The document describes a vehicle-mounted jammer system meant to block signals from remote-controlled explosive devices. It has a very high output power of 1360 watts and uses state-of-the-art technology for maximum jamming performance across frequency bands from 20-3000 MHz. The modular system can operate in sweep, spot, or open communication modes and provides 360-degree protection within a 200-400 meter range, depending on conditions. Its purpose is to protect special military, police, and VIP units from terrorist bomb threats.
1804 car vip protection
The document describes a vehicle-mounted jammer system designed to block remote-controlled improvised explosive devices. The system uses 1360 watts of power across 17 modules to sweep frequencies from 20 MHz to 3000 MHz. It has three operating modes and allows open communication windows. The jammer is intended to provide security for special military, police, and VIP protection units.
1804 car vip protection
The document describes a vehicle-mounted jammer system meant to block signals from remote-controlled improvised explosive devices. It has a very high output power of 1360 watts and uses state-of-the-art technology for maximum jamming performance across frequency bands from 20-3000 MHz. The modular system can be configured for different applications and provides 360-degree protection through broadband omni-directional antennas.
Jammers for Convoy protection
The document summarizes a vehicle-mounted jammer system meant to block remote-controlled improvised explosive devices. It has a very high output power of 1360 watts and uses state-of-the-art technology for maximum jamming performance across frequency bands from 20-3000 MHz. The modular system can operate in sweep, spot, or open communication modes and provides 360-degree protection within a 200-400 meter range, making it suitable for special military, police, and VIP protection operations.
Mob. comp . prst
This presentation provides an overview of the Global System for Mobile (GSM) communications. It discusses the architecture of GSM including the mobile station, base station subsystem, and network subsystem. It also covers specifications such as frequency bands and carrier spacing, security features like encryption, and applications like telemetry systems. The presentation concludes by looking at the future of GSM including data rate improvements through technologies like GPRS, EDGE, and the transition to 3G standards.
INTELLIGENT ACCESS CONTROL. TIME & ATTENDANCE SYSTEM
The document describes an intelligent access control and time attendance system from Bioinsec Co., Ltd. It includes details about various components of the system such as fingerprint and RF card readers, a color LCD display, touchpad, waterproofing, connectivity options, and remote management features. The system provides user authentication, visitor verification, and stores log data. It can be customized with different reader options and has expansion capabilities.
Recommended
Snifferfordetectinglostmobile 130811054537-phpapp01
The document discusses a sniffer device that can help locate a lost mobile phone. It consists of a small base station with a unidirectional antenna and tracking software. The sniffer acts as a base transceiver station, communicating with the mobile telephone switching office to detect the lost phone's unique IMEI number when it is turned on within range. Some key advantages are that it is useful for finding lost mobiles, has effective low cost and power consumption, and is easy to design. The method could be improved with modern technology.
Sniffer for detecting lost mobile ppt
The document discusses a sniffer device that can help locate a lost mobile phone. The sniffer works by acting as a small mobile base station with a unidirectional antenna and tracking software. It detects the lost phone's unique IMEI number and increases its transmission frequency to communicate with the phone. Some key advantages are that it is useful for finding lost mobiles, has low cost and power consumption, and is easy to design. The method could be improved with modern technology.
1804 car vip protection
The document describes a vehicle-mounted jammer system meant to block signals from remote-controlled explosive devices. It has a very high output power of 1360 watts and uses state-of-the-art technology for maximum jamming performance across frequency bands from 20-3000 MHz. The modular system can operate in sweep, spot, or open communication modes and provides 360-degree protection within a 200-400 meter range, depending on conditions. Its purpose is to protect special military, police, and VIP units from terrorist bomb threats.
1804 car vip protection
The document describes a vehicle-mounted jammer system designed to block remote-controlled improvised explosive devices. The system uses 1360 watts of power across 17 modules to sweep frequencies from 20 MHz to 3000 MHz. It has three operating modes and allows open communication windows. The jammer is intended to provide security for special military, police, and VIP protection units.
1804 car vip protection
The document describes a vehicle-mounted jammer system meant to block signals from remote-controlled improvised explosive devices. It has a very high output power of 1360 watts and uses state-of-the-art technology for maximum jamming performance across frequency bands from 20-3000 MHz. The modular system can be configured for different applications and provides 360-degree protection through broadband omni-directional antennas.
Jammers for Convoy protection
The document summarizes a vehicle-mounted jammer system meant to block remote-controlled improvised explosive devices. It has a very high output power of 1360 watts and uses state-of-the-art technology for maximum jamming performance across frequency bands from 20-3000 MHz. The modular system can operate in sweep, spot, or open communication modes and provides 360-degree protection within a 200-400 meter range, making it suitable for special military, police, and VIP protection operations.
Mob. comp . prst
This presentation provides an overview of the Global System for Mobile (GSM) communications. It discusses the architecture of GSM including the mobile station, base station subsystem, and network subsystem. It also covers specifications such as frequency bands and carrier spacing, security features like encryption, and applications like telemetry systems. The presentation concludes by looking at the future of GSM including data rate improvements through technologies like GPRS, EDGE, and the transition to 3G standards.
INTELLIGENT ACCESS CONTROL. TIME & ATTENDANCE SYSTEM
The document describes an intelligent access control and time attendance system from Bioinsec Co., Ltd. It includes details about various components of the system such as fingerprint and RF card readers, a color LCD display, touchpad, waterproofing, connectivity options, and remote management features. The system provides user authentication, visitor verification, and stores log data. It can be customized with different reader options and has expansion capabilities.
Spec00306
1) The wireless and wired intelligent alarm system has a chromatic back-lit English screen main panel for easy setting and monitoring.
2) It can arm in away and stay modes, record voice and alarm information, and send alerts to up to two phone numbers.
3) The system has memory to maintain settings after a power outage and an internal battery to operate for at least 24 hours without power.
Wireless signal jamming
This document discusses wireless signal jamming. It describes 5 types of jamming techniques (A through E) used to block wireless signals like GSM cellular networks. Type A devices transmit noise across all frequencies to disrupt all signals. Type B detects phones and prevents call establishment. Type C disables ringer/functions in "quiet zones". Type D only jams during call attempts. Type E uses electromagnetic shielding. Jamming is used to prevent ringing in places requiring silence like worship sites, lectures, hospitals. The document provides an overview of wireless jamming technologies and their applications.
OpenBTS: Emergency GSM Messaging & Monitoring System for Civil Protection
Open BTS: Emergency GSM Messaging & Monitoring System for Civil Protection is proposed as a solution ready-to-deploy in the event of natural disaster, in that areas where GSM networks are temporarily down.
Embedded system
This document defines embedded systems and describes their typical hardware components. It provides examples of embedded systems including PDAs, cell phones, automobiles, medical imaging devices, and more. The main hardware units of an embedded system are then outlined, including the power source, clock oscillator, timers and real-time clocks, reset circuit, memory, input/output ports and interfaces, analog-to-digital converters, input and output devices, and networking components. Interrupt handlers are also noted as an important hardware unit.
Gsm for-dummies
GSM is a digital cellular network standard developed in the 1980s to provide high quality, secure mobile voice and data services across Europe and beyond. Key components of a GSM network include mobile stations containing SIM cards, base transceiver stations that communicate with mobile devices, base station controllers that manage multiple BTS, mobile switching centers that route calls between the network and PSTN, and databases like HLR and EIR that store subscriber and device identities and authentication information.
Gsm for-dummies
GSM is a digital cellular network standard developed in 1984 to provide high quality, secure mobile voice and data services across Europe and beyond. A GSM network consists of mobile stations (cell phones), base transceiver stations, base station controllers, mobile switching centers, home and visitor location registers, and other components. It uses FDMA to divide frequencies into channels and TDMA to divide channels into timeslots to allow multiple users to share the same frequency spectrum.
Spec00307
This document summarizes the features of a wireless and wired intelligent GSM alarm system that uses GSM networks for communication. It supports multiple GSM bands, sending alerts to mobile phones when alarms are triggered. The system can connect up to 7 wired sensors and various wireless detectors. It indicates activated zones, allows arming/disarming by phone or SMS, and includes an onsite siren and relay output.
Automatic Garage System using VHDL
The document describes an automatic garage system that uses a VHDL programming language. It uses a DTMF circuit to receive signals from a cell phone and control servo motors to open and close the garage door. An IR sensor is used as input to a 30-second counter timer to close the door automatically after a car enters. The system utilizes components like a DE0 Altera kit, DTMF decoder, servo motors, IR sensor, and counters in VHDL code to control the opening and closing of the garage door remotely via a cell phone.
Hacking RF based IoT devices
When doing a security assessment, observing how a device communicates with the outside world is a must. It tells you what it sends and receives, and in general let you understand if it can be attacked. We have tools and methods to do it for the server side API, the associated mobile apps, the web apps and so on - but what about the device itself (the "thing")? Moreover, what happens if the device is not using traditional HTTP/S request, or does not even "speak" plain old tcp/ip?
During this talk, we'll go over the obstacles we have to face when analyzing unknown, custom RF based communication that drives the target IoT system we're pentesting. We'll talk about and see in action the tools that will allow us to capture RF traffic, analyze it, brute force it, replay it, and of course forge it. It's like common attacks, but at the RF level. So let's hack some things belonging to the real world!
473 tactical cellular jamming system
1) The document describes a tactical cellular jamming system that can jam up to 6 cellular bands and has a maximum output power of 100W per band.
2) The system uses a digital receiver to scan cellular bands, identify control channels, and send that information to the jammer. The jammer can then block specific channels within each band.
3) The jammer supports uplink and downlink jamming simultaneously across multiple cellular standards and frequencies between 425-2170MHz. It can be controlled via an RS232 cable connected to a PC.
473 tactical cellular jamming system
1) The document describes a tactical cellular jamming system that can jam up to 6 cellular bands and has a maximum output power of 100W per band.
2) The system uses a digital receiver to scan cellular bands, identify control channels, and send that information to the jammer. The jammer can then block specific channels within each band.
3) The jammer supports uplink and downlink jamming simultaneously across multiple cellular standards and frequencies between 425-2170MHz. It can be controlled via an RS232 cable connected to a PC.
473 tactical cellular jamming system
This document describes a tactical cellular jamming system that can jam up to 6 cellular bands simultaneously. It scans for cellular signals, displays the channel levels, and then instructs the jammer to block the nearest channels. The system supports uplink and downlink jamming individually or together. It has a high sensitivity receiver and high output power jammer modules that can be remotely controlled through an interface. The system is designed for special security and military applications to ensure communication security over long distances.
Final gsm1
GSM was developed in the 1980s to address incompatible mobile phone systems across European countries and the increasing demand for telecommunication services. It specified a common digital system for wireless networks in Europe called Global System for Mobile Communications. GSM introduced advantages like better call quality, data transmission support, international roaming, and lower costs. It has three subsystems: the network switching subsystem, base station subsystem, and network management system. Security and authentication are enabled through subscriber identity modules (SIM cards), visitor location registers, home location registers, and authentication centers.
gsm
Mobile communication has evolved from 1G to 4G networks over time. 1G networks used analog technologies while newer generations like 2G, 3G and 4G use digital technologies. 2G networks like GSM use TDMA to allow multiple users to access the network simultaneously. The GSM network architecture consists of mobile stations, base station subsystem and network subsystem. The base station subsystem comprises of base transceiver stations and base station controllers. The network subsystem includes switching centers, databases and registers that control connectivity and mobility. GSM ensures security using authentication and encryption algorithms.
Mobile jammer
The document discusses different types of cell phone jammers, including their principles of operation, design parameters, functional units, and jamming techniques. It describes how jammers work by transmitting radio frequencies to interfere with cell phone signals and disrupt communication between phones and towers. The document outlines the advantages of jammers for situations like exams or sensitive meetings, but also notes the disadvantages like inconvenience and inability to make emergency calls. It concludes by discussing potential future improvements and both useful and problematic aspects of cell phone jamming technology.
Banksecurity with automatic voice announcement system
This document describes a bank security system project consisting of a team of 3 members. The system uses a PIR sensor to detect human movement and a microcontroller to collect this data. If movement is detected, it will provide a voice announcement through a speaker and display a message on an LCD screen. The system aims to provide security for banks and offices using inexpensive, low-power sensors and an audio announcement for alerts. It can be used in various applications like banks, homes, temples, and shopping malls to provide safety through motion detection and audible warnings.
USG 473 tactical cellular jamming system-nl
1. The document describes a tactical cellular jamming system that can jam up to 6 cellular bands with an output power of up to 100W per band.
2. The system uses a digital receiver to scan cellular bands, identify control channels, and send that information to the jammer. The jammer can then block selected channels.
3. The jamming system supports uplink and downlink jamming simultaneously across multiple cellular standards and can be controlled via an RS-232 interface.
First and second generation communication
1G mobile networks used analog signals and FDMA technology which resulted in inefficient spectrum usage. 2G introduced GSM, using digital TDMA technology for improved capacity and security. Key aspects of 2G included encryption, SMS messaging, and SIM cards which enabled roaming and secure authentication. The core network components of 2G like HLR, VLR, and MSC enabled location management and call routing.
Sniffer ppt
The document describes a sniffer device that can detect and locate lost mobile phones. The sniffer acts as a small base station that operates at a different frequency than mobile networks. It includes a unidirectional antenna and tracking software. The sniffer detects lost phones by their unique IMEI number stored in a database. When in range, it can communicate with lost phones and track their location to help recover them. The design aims to provide an inexpensive solution for locating lost phones, though it has limitations if phones have low battery or are in shadow areas with weak signals.
Sniffer for detecting lost mobiles
Sniffer is a proposed solution to help locate lost mobile phones. It works by using a small base station with a unidirectional antenna to detect the unique IMEI number of lost phones as they are powered on. The IMEI number is stored in a database along with other identifying information. When a lost phone is powered on, the sniffer detects its IMEI and matches it to the database to help locate the missing device. The sniffer system aims to provide a solution to the growing problem of lost and unrecovered mobile phones.
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.More Related Content
Similar to Harsha - 424.pptx
Spec00306
1) The wireless and wired intelligent alarm system has a chromatic back-lit English screen main panel for easy setting and monitoring.
2) It can arm in away and stay modes, record voice and alarm information, and send alerts to up to two phone numbers.
3) The system has memory to maintain settings after a power outage and an internal battery to operate for at least 24 hours without power.
Wireless signal jamming
This document discusses wireless signal jamming. It describes 5 types of jamming techniques (A through E) used to block wireless signals like GSM cellular networks. Type A devices transmit noise across all frequencies to disrupt all signals. Type B detects phones and prevents call establishment. Type C disables ringer/functions in "quiet zones". Type D only jams during call attempts. Type E uses electromagnetic shielding. Jamming is used to prevent ringing in places requiring silence like worship sites, lectures, hospitals. The document provides an overview of wireless jamming technologies and their applications.
OpenBTS: Emergency GSM Messaging & Monitoring System for Civil Protection
Open BTS: Emergency GSM Messaging & Monitoring System for Civil Protection is proposed as a solution ready-to-deploy in the event of natural disaster, in that areas where GSM networks are temporarily down.
Embedded system
This document defines embedded systems and describes their typical hardware components. It provides examples of embedded systems including PDAs, cell phones, automobiles, medical imaging devices, and more. The main hardware units of an embedded system are then outlined, including the power source, clock oscillator, timers and real-time clocks, reset circuit, memory, input/output ports and interfaces, analog-to-digital converters, input and output devices, and networking components. Interrupt handlers are also noted as an important hardware unit.
Gsm for-dummies
GSM is a digital cellular network standard developed in the 1980s to provide high quality, secure mobile voice and data services across Europe and beyond. Key components of a GSM network include mobile stations containing SIM cards, base transceiver stations that communicate with mobile devices, base station controllers that manage multiple BTS, mobile switching centers that route calls between the network and PSTN, and databases like HLR and EIR that store subscriber and device identities and authentication information.
Gsm for-dummies
GSM is a digital cellular network standard developed in 1984 to provide high quality, secure mobile voice and data services across Europe and beyond. A GSM network consists of mobile stations (cell phones), base transceiver stations, base station controllers, mobile switching centers, home and visitor location registers, and other components. It uses FDMA to divide frequencies into channels and TDMA to divide channels into timeslots to allow multiple users to share the same frequency spectrum.
Spec00307
This document summarizes the features of a wireless and wired intelligent GSM alarm system that uses GSM networks for communication. It supports multiple GSM bands, sending alerts to mobile phones when alarms are triggered. The system can connect up to 7 wired sensors and various wireless detectors. It indicates activated zones, allows arming/disarming by phone or SMS, and includes an onsite siren and relay output.
Automatic Garage System using VHDL
The document describes an automatic garage system that uses a VHDL programming language. It uses a DTMF circuit to receive signals from a cell phone and control servo motors to open and close the garage door. An IR sensor is used as input to a 30-second counter timer to close the door automatically after a car enters. The system utilizes components like a DE0 Altera kit, DTMF decoder, servo motors, IR sensor, and counters in VHDL code to control the opening and closing of the garage door remotely via a cell phone.
Hacking RF based IoT devices
When doing a security assessment, observing how a device communicates with the outside world is a must. It tells you what it sends and receives, and in general let you understand if it can be attacked. We have tools and methods to do it for the server side API, the associated mobile apps, the web apps and so on - but what about the device itself (the "thing")? Moreover, what happens if the device is not using traditional HTTP/S request, or does not even "speak" plain old tcp/ip?
During this talk, we'll go over the obstacles we have to face when analyzing unknown, custom RF based communication that drives the target IoT system we're pentesting. We'll talk about and see in action the tools that will allow us to capture RF traffic, analyze it, brute force it, replay it, and of course forge it. It's like common attacks, but at the RF level. So let's hack some things belonging to the real world!
473 tactical cellular jamming system
1) The document describes a tactical cellular jamming system that can jam up to 6 cellular bands and has a maximum output power of 100W per band.
2) The system uses a digital receiver to scan cellular bands, identify control channels, and send that information to the jammer. The jammer can then block specific channels within each band.
3) The jammer supports uplink and downlink jamming simultaneously across multiple cellular standards and frequencies between 425-2170MHz. It can be controlled via an RS232 cable connected to a PC.
473 tactical cellular jamming system
1) The document describes a tactical cellular jamming system that can jam up to 6 cellular bands and has a maximum output power of 100W per band.
2) The system uses a digital receiver to scan cellular bands, identify control channels, and send that information to the jammer. The jammer can then block specific channels within each band.
3) The jammer supports uplink and downlink jamming simultaneously across multiple cellular standards and frequencies between 425-2170MHz. It can be controlled via an RS232 cable connected to a PC.
473 tactical cellular jamming system
This document describes a tactical cellular jamming system that can jam up to 6 cellular bands simultaneously. It scans for cellular signals, displays the channel levels, and then instructs the jammer to block the nearest channels. The system supports uplink and downlink jamming individually or together. It has a high sensitivity receiver and high output power jammer modules that can be remotely controlled through an interface. The system is designed for special security and military applications to ensure communication security over long distances.
Final gsm1
GSM was developed in the 1980s to address incompatible mobile phone systems across European countries and the increasing demand for telecommunication services. It specified a common digital system for wireless networks in Europe called Global System for Mobile Communications. GSM introduced advantages like better call quality, data transmission support, international roaming, and lower costs. It has three subsystems: the network switching subsystem, base station subsystem, and network management system. Security and authentication are enabled through subscriber identity modules (SIM cards), visitor location registers, home location registers, and authentication centers.
gsm
Mobile communication has evolved from 1G to 4G networks over time. 1G networks used analog technologies while newer generations like 2G, 3G and 4G use digital technologies. 2G networks like GSM use TDMA to allow multiple users to access the network simultaneously. The GSM network architecture consists of mobile stations, base station subsystem and network subsystem. The base station subsystem comprises of base transceiver stations and base station controllers. The network subsystem includes switching centers, databases and registers that control connectivity and mobility. GSM ensures security using authentication and encryption algorithms.
Mobile jammer
The document discusses different types of cell phone jammers, including their principles of operation, design parameters, functional units, and jamming techniques. It describes how jammers work by transmitting radio frequencies to interfere with cell phone signals and disrupt communication between phones and towers. The document outlines the advantages of jammers for situations like exams or sensitive meetings, but also notes the disadvantages like inconvenience and inability to make emergency calls. It concludes by discussing potential future improvements and both useful and problematic aspects of cell phone jamming technology.
Banksecurity with automatic voice announcement system
This document describes a bank security system project consisting of a team of 3 members. The system uses a PIR sensor to detect human movement and a microcontroller to collect this data. If movement is detected, it will provide a voice announcement through a speaker and display a message on an LCD screen. The system aims to provide security for banks and offices using inexpensive, low-power sensors and an audio announcement for alerts. It can be used in various applications like banks, homes, temples, and shopping malls to provide safety through motion detection and audible warnings.
USG 473 tactical cellular jamming system-nl
1. The document describes a tactical cellular jamming system that can jam up to 6 cellular bands with an output power of up to 100W per band.
2. The system uses a digital receiver to scan cellular bands, identify control channels, and send that information to the jammer. The jammer can then block selected channels.
3. The jamming system supports uplink and downlink jamming simultaneously across multiple cellular standards and can be controlled via an RS-232 interface.
First and second generation communication
1G mobile networks used analog signals and FDMA technology which resulted in inefficient spectrum usage. 2G introduced GSM, using digital TDMA technology for improved capacity and security. Key aspects of 2G included encryption, SMS messaging, and SIM cards which enabled roaming and secure authentication. The core network components of 2G like HLR, VLR, and MSC enabled location management and call routing.
Sniffer ppt
The document describes a sniffer device that can detect and locate lost mobile phones. The sniffer acts as a small base station that operates at a different frequency than mobile networks. It includes a unidirectional antenna and tracking software. The sniffer detects lost phones by their unique IMEI number stored in a database. When in range, it can communicate with lost phones and track their location to help recover them. The design aims to provide an inexpensive solution for locating lost phones, though it has limitations if phones have low battery or are in shadow areas with weak signals.
Sniffer for detecting lost mobiles
Sniffer is a proposed solution to help locate lost mobile phones. It works by using a small base station with a unidirectional antenna to detect the unique IMEI number of lost phones as they are powered on. The IMEI number is stored in a database along with other identifying information. When a lost phone is powered on, the sniffer detects its IMEI and matches it to the database to help locate the missing device. The sniffer system aims to provide a solution to the growing problem of lost and unrecovered mobile phones.
Similar to Harsha - 424.pptx (20)
OpenBTS: Emergency GSM Messaging & Monitoring System for Civil Protection
OpenBTS: Emergency GSM Messaging & Monitoring System for Civil Protection
Banksecurity with automatic voice announcement system
Banksecurity with automatic voice announcement system
Recently uploaded
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneWhat is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Recently uploaded (20)
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Harsha - 424.pptx
- 1. Under the guidance of: Mr. Ch. Vinay Kumar Asst. Professor
- 4. International Mobile Equipment Identity Unique number embedded in the mobile phone. Used for blocking of call made by unauthorized person Numbering system is a 15 digit unique code Identify-GSM/DCS/PCM Check EIR (Equipment ID Register)
- 6. Small base station Include transceiver section Operated at frequency (900mhz which is VHF range) OSCILLATOR circuit-for frequency range Cooling is Important that has to be provided to the circuit Low power transmitter (help in nature)
- 7. Act as a eyes for the sniffer Antenna is a device works at specified frequency Transmitting & receiving data signal Transmit power Used to show radiation pattern
- 9. Feature: help to create database using RAM IMEA - embedded in a chip RAM stores - IMEI no. Act as a database