Harold Washington Innovation Lab photo tour
•
1 like•208 views
This document provides an overview of the Chicago Public Library Maker Lab, including its 3D printers, laser cutters, digital design software, and weekly schedule of events. Photos show the entrance, display case, equipment like the 3D printers Larry, Moe, and Curly, the CNC router Ziggy Stardust, and vinyl cutter Thelma. The space also has whiteboards on the walls and information on house rules and projects created using the tools.
Report
Share
Report
Share
Recommended
NCompass Live: Lessons Learned Establishing a Technology Makerspace
NCompass Live - April 27, 2016
http://nlc.nebraska.gov/ncompasslive/
The library is the intellectual crossroads of the university, a place where students come to research, explore, and discover. It was in this spirit that a new service - an Innovation Lab - was established during the Fall Quarter of 2015 in the John M. Pfau Library at California State University, San Bernardino.
The Innovation Lab is a technology-focused "Makerspace" for students that encourages creativity and inquiry, facilitates cross-disciplinary collaboration, and promotes true innovation. The ability to work hands-on with emerging technologies and rapidly prototype solutions gives students greater understanding of real-world problems. The lab is open to all CSUSB students regardless of discipline, skill set, or background. In addition, the lab is a safe space where students can learn to persevere in the face of failure - a skill central to lifelong learning and success in the 21st century.
Embarking on an innovative new service can be rife with pitfalls and obstacles. The presenter, former Head of Library Information Technology at CSU's Pfau Library, will share the logistics involved with planning, implementing and maintaining a makerspace. Technologies (3D scanning, printing, and modeling; CNC milling, Arduino, RaspberryPi), services (workshops, peer-to-peer tutoring), and policies will be discussed. He will also share mistakes as well as triumphs, and will address the lessons learned during the first year of operation.
Presenter: Jonathan Smith, Director for Library Technology, Sonoma (Calif.) State University.
Supporting Zine Creation in Makerspaces
This document discusses zines and their role in makerspaces. It defines zines as independently published booklets and explains that makerspaces provide a safe, collaborative environment for zine creation through workshops and resources. The document outlines equipment, tools, and materials needed for zine making. It also addresses issues like binding, attribution, and distribution. Overall, the document promotes zines as a way for makerspaces to encourage learning, sharing, and community building.
From Commons to Classroom: Evolving Learning Spaces in Academic Libraries
Vickie Karasic and Sam Kirk presented on evolving learning spaces in academic libraries. They discussed how libraries have transitioned from traditional spaces to information commons, learning commons, and active learning classrooms that incorporate technology and collaborative spaces. They provided examples of learning spaces at different universities and discussed practical considerations for implementing new types of learning spaces, such as creating technology support plans and instructor training.
From Library To Learning Commons.Ny.Slideshare
Valerie Diggs discusses transforming a school library into a learning commons to better serve students' changing educational and technological needs. A learning commons is a collaborative space for teaching, learning, group work, creativity and community, rather than just a place for finding information. Diggs outlines building a program around teaching and learning, holding events like poetry slams, and getting input from students and faculty before renovating the physical space with an open design. The transformed learning commons has been successful in engaging the school community and supporting new forms of learning.
Makerspaces in Libraries: Embracing DIY Culture in Your Library
Presented at 5 Indiana public libraries in Fort Wayne, Indianapolis, Columbus, Terre Haute, and Winnemac in Sept 2016.
Makerspaces: Embracing DIY Culture at Your Library Workshop (April 2018)
This document discusses makerspaces in libraries and provides information about hosting makerspace events. It defines makerspaces as creative spaces where people can invent and learn using tools like 3D printers, electronics, and craft supplies. The document outlines different types of makerspace tools and technologies and provides examples of libraries that have successful makerspaces. It then gives recommendations and instructions for hosting specific makerspace events focused on topics like wearable electronics, robotics, and virtual reality. The document concludes with tips for pitching a makerspace idea to a library board.
UI Beyond the Browser - Software for Hardware Projects
Hardware is becoming easier to design and manufacture, approaching the ease of software. This presentation:
- takes you on a tour of the changes in hardware
- a crash course in building circuits
- teaches the basics of using and programming Arduino
- introduces Javascript libraries for controlling hardware and robots
- how to get involved with hardware projects
If you'd like me to present this or similar content at your event, please contact me: peter at pchristensen dot com
Makercamp
The document discusses DIY Makercamp, an event to teach hardware development skills. It notes that open-source hardware platforms have lowered the barrier to creating hardware by providing resources. Crowdfunding through Kickstarter has also made hardware entrepreneurship more accessible by allowing prototypes to be funded and manufactured. The Makercamp event will be held before SXSW Interactive and teach participants skills for sourcing tools, prototyping designs, and bringing hardware products to market.
Recommended
NCompass Live: Lessons Learned Establishing a Technology Makerspace
NCompass Live - April 27, 2016
http://nlc.nebraska.gov/ncompasslive/
The library is the intellectual crossroads of the university, a place where students come to research, explore, and discover. It was in this spirit that a new service - an Innovation Lab - was established during the Fall Quarter of 2015 in the John M. Pfau Library at California State University, San Bernardino.
The Innovation Lab is a technology-focused "Makerspace" for students that encourages creativity and inquiry, facilitates cross-disciplinary collaboration, and promotes true innovation. The ability to work hands-on with emerging technologies and rapidly prototype solutions gives students greater understanding of real-world problems. The lab is open to all CSUSB students regardless of discipline, skill set, or background. In addition, the lab is a safe space where students can learn to persevere in the face of failure - a skill central to lifelong learning and success in the 21st century.
Embarking on an innovative new service can be rife with pitfalls and obstacles. The presenter, former Head of Library Information Technology at CSU's Pfau Library, will share the logistics involved with planning, implementing and maintaining a makerspace. Technologies (3D scanning, printing, and modeling; CNC milling, Arduino, RaspberryPi), services (workshops, peer-to-peer tutoring), and policies will be discussed. He will also share mistakes as well as triumphs, and will address the lessons learned during the first year of operation.
Presenter: Jonathan Smith, Director for Library Technology, Sonoma (Calif.) State University.
Supporting Zine Creation in Makerspaces
This document discusses zines and their role in makerspaces. It defines zines as independently published booklets and explains that makerspaces provide a safe, collaborative environment for zine creation through workshops and resources. The document outlines equipment, tools, and materials needed for zine making. It also addresses issues like binding, attribution, and distribution. Overall, the document promotes zines as a way for makerspaces to encourage learning, sharing, and community building.
From Commons to Classroom: Evolving Learning Spaces in Academic Libraries
Vickie Karasic and Sam Kirk presented on evolving learning spaces in academic libraries. They discussed how libraries have transitioned from traditional spaces to information commons, learning commons, and active learning classrooms that incorporate technology and collaborative spaces. They provided examples of learning spaces at different universities and discussed practical considerations for implementing new types of learning spaces, such as creating technology support plans and instructor training.
From Library To Learning Commons.Ny.Slideshare
Valerie Diggs discusses transforming a school library into a learning commons to better serve students' changing educational and technological needs. A learning commons is a collaborative space for teaching, learning, group work, creativity and community, rather than just a place for finding information. Diggs outlines building a program around teaching and learning, holding events like poetry slams, and getting input from students and faculty before renovating the physical space with an open design. The transformed learning commons has been successful in engaging the school community and supporting new forms of learning.
Makerspaces in Libraries: Embracing DIY Culture in Your Library
Presented at 5 Indiana public libraries in Fort Wayne, Indianapolis, Columbus, Terre Haute, and Winnemac in Sept 2016.
Makerspaces: Embracing DIY Culture at Your Library Workshop (April 2018)
This document discusses makerspaces in libraries and provides information about hosting makerspace events. It defines makerspaces as creative spaces where people can invent and learn using tools like 3D printers, electronics, and craft supplies. The document outlines different types of makerspace tools and technologies and provides examples of libraries that have successful makerspaces. It then gives recommendations and instructions for hosting specific makerspace events focused on topics like wearable electronics, robotics, and virtual reality. The document concludes with tips for pitching a makerspace idea to a library board.
UI Beyond the Browser - Software for Hardware Projects
Hardware is becoming easier to design and manufacture, approaching the ease of software. This presentation:
- takes you on a tour of the changes in hardware
- a crash course in building circuits
- teaches the basics of using and programming Arduino
- introduces Javascript libraries for controlling hardware and robots
- how to get involved with hardware projects
If you'd like me to present this or similar content at your event, please contact me: peter at pchristensen dot com
Makercamp
The document discusses DIY Makercamp, an event to teach hardware development skills. It notes that open-source hardware platforms have lowered the barrier to creating hardware by providing resources. Crowdfunding through Kickstarter has also made hardware entrepreneurship more accessible by allowing prototypes to be funded and manufactured. The Makercamp event will be held before SXSW Interactive and teach participants skills for sourcing tools, prototyping designs, and bringing hardware products to market.
What’s New With 3D Design and Printing?
3D printing has been a focal point in library makerspaces for several years; however, it seems that interest in the technology has decelerated. The technology may have slowed down, but there is still a lot going on in this space, which can be overwhelming to keep up with it all. In this webinar:
- Learn what 3D printing is, how it works, and gain insight on how to implement/maintain, and to perhaps build your own 3D printer.
- Get a snapshot of some of the best 3D printers and products on the market, including an overview on resin and carbon printers.
- Discover a variety of 3D design applications to help with getting ideas to working prototypes.
- Study trends in digital scanning and other emerging 3D design/printing technologies.
- Interview an expert 3D designer/printer in the industry to get even more insight into this exciting technology.
3D Design Fundamentals
This document provides an overview of 3D printing and 3D design fundamentals. It discusses the history and process of 3D printing, different 3D printing technologies, common 3D file types, the basic 3D printing process, and tips for 3D printing. It also covers basic 3D design concepts like navigating 3D space, modeling techniques, materials, and rendering. Additionally, it introduces several free and paid 3D design applications as well as 3D printing services and repositories.
Technologies of Makerspaces
A makerspace is a community space where people can gather to work on projects using tools and expertise available. The document discusses what a makerspace is and provides examples of the types of tools, technologies, and projects typically seen in makerspaces. It outlines considerations for starting a makerspace, including determining user needs and available space, tools, and resources. The main technologies discussed include 3D printing, electronics, robotics, and wearable technology. Prototyping, electronics hobbyist projects, and teaching STEM concepts are highlighted as common activities supported by makerspaces.
Introducing 3D Design and Printing
The document provides an overview of 3D printing including what it is, the different 3D printing processes, common 3D file types, how to 3D print an object, examples of objects that can be 3D printed, select 3D printers and applications, 3D printing services, and emerging technologies like digital scanning. It also discusses how to implement and maintain a 3D printer in a library or makerspace.
Inside3DPrintingSantaClara_JerryRopelato
The document discusses the production of 3D printed architectural models. It describes the types of models that can be produced including residential, commercial, and landscape models. It outlines the 3D printing process including file preparation, 3D printing using different technologies like SLS and polyjet printing, and post-processing steps. The document provides advice for 3D printing architectural models and notes that it takes patience and iterations to get the printing process right.
Academic Libraries as Makerspace: 3D Printing and Knowledge Creation
As part of an ongoing plan to transform an underutilized science and engineering library into a lively incubator for student-faculty collaboration and innovation, staff at the University of Nevada, Reno decided to launch a bold initiative: build a 3D scanning and printing “makerspace” and make it available to the entire campus. The service has been wildly successful with 3D printers running 24 hours a day. Furthermore, positioning the library as a place that facilitates knowledge creation beyond text based tools and resources has been a game changer. Students are highly motivated to learn new skills in order to take advantage of new technologies (Lynda.com gets heavy use); they experiment and iterate quickly to perfect their designs. Even better, students from engineering are now rubbing elbows with people from fields such as biology, computer science, geology, and even art. Like the printing press and the personal computer, 3-D printers have been hailed as a revolutionary device that will ultimately transform the way the world operates.
3d printing meetup
This 3D printing meetup agenda covered the following topics in 3 sentences:
The meetup was hosted by Dreambox on February 11th at the Berkeley Skydeck to discuss 3D printing technologies and applications. Attendees could sign up online to receive 3D printing material samples and the agenda included discussions on the history and current uses of 3D printing, how to design 3D models, and examples of student 3D printing projects at UC Berkeley. Dreambox also proposed a semester-long student project to collaboratively 3D model and print scale models of major campus buildings.
3 doodler
The document discusses the 3Doodler, a pen that allows users to "doodle" in 3D by extruding plastic filaments to form 3D shapes and objects, addressing the issues of cost, size and usability that had previously limited 3D printing technology. It was successfully crowdfunded on Kickstarter, raising over $1.9 million, and its creators hope it will make 3D printing more accessible to the general public and inspire new applications.
Learn to 3D Print Right Now!
This talk was first presented at the Maryland Society for Educational Technology 2014 Common Ground conference. It is meant as an introductory talk about 3D printing and how to get started designing for 3D printing and printing even if you don't have a 3D printer.
We discuss:
* What exactly is 3D printing
* What can it do
* What it can't do
* The uses of 3D printing in fashion, architecture, food, medical devices, and tools
* Real world projects using 3D printing and everyday people
* How 3D printing can be used in the classroom
* Different types of 3D printers
* Different types of 3D printing materials
* Different software solutions for creating 3D designs
* Some 3D printing resources
Welcome to Arduino
Pete Prodoehl introduces Arduino, an open-source electronics prototyping platform used by artists, designers, hobbyists and others interested in creating interactive objects. Arduino boards can control devices like 3D printers, drones, robots and more through coding. While Arduino lacks features like an operating system, keyboard and display, it allows users to connect buttons, sensors and motors to explore physical computing through sample projects. Resources for learning and purchasing Arduino components are provided.
Programming the Real World: Javascript for Makers
Hardware is becoming easier to design and manufacture, approaching the ease of software. This presentation:
- takes you on a tour of the changes in hardware
- a crash course in building circuits
- teaches the basics of using and programming Arduino
- introduces Javascript libraries for controlling hardware and robots
- how to get involved with hardware projects
If you'd like me to present this or similar content at your event, please contact me: peter at pchristensen dot com
3D Printing & Rapid Prototyping
3D Printing aka Rapid Prototyping is a game changing technology that is changing the way that designers produce prototypes and short-run manufacturing. This presentation is part of Delvinia's internal Lunch & Learn workshops and is intended for educational purposes only.
Copy and Paste Hardware
The document discusses how the Maker movement is accelerating innovation through open source tools. It provides examples of how various simulation training tools were developed by copying designs from other open source projects and modifying them to meet specific needs. This allowed innovative solutions to be developed rapidly and at low cost. The Center for the Digital Globe (CDiG) is described as focusing on expanding international education and research through collaboration across academic disciplines.
Tinkers, Printers, & Makers: Makerspaces in the Library (November 2015)
This document discusses makerspaces in libraries. It begins by defining makerspaces and outlining the necessary equipment, which can include items like LEGO, LittleBits, 3D printers and scanners. It then examines specific 3D printer options at various price points. The rest of the document covers other tools like Raspberry Pi, considerations for implementing a makerspace in a library, as well as resources and contacts for more information.
about ALT Lab
This document provides information about altLab, a creativity lab in Lisbon, Portugal that focuses on digital fabrication, computer vision, creative robotics, soft circuits, and interactive environments. It lists various activities held at altLab such as classes, workshops, and events on topics like 3D printing, electronics, and solar robotics. It also mentions some projects created at altLab and provides details about altLab's facilities and social media presence.
Digital Fabrication.docx
For Information about technology and the Future technology
to read the article click links given below
https://www.informationtechnologys.world
https://bit.ly/3KzGyrC
Geneva Hackerspace
Hackerspaces are community-run spaces where people can gather to work on projects using tools and resources that may not be accessible to individuals. This document discusses what a hackerspace is and provides details about the Post Tenebras Lab hackerspace in Geneva, including the resources and tools available, such as 3D printers, laser cutters, electronics equipment, and more. It explains that the goals of Post Tenebras Lab are to create an open community for creating, sharing, and collaborating, as well as spreading knowledge to others. Typical activities at the space include workshops, classes, and open nights every Tuesday for community members to work on projects together.
Social Elements of 3D Printing Presentation
Fab labs are shared workspaces containing computer-controlled tools for digital fabrication and mass production. The first fab labs grew out of collaboration between MIT's Grassroots Invention Group and Center for Bits and Atoms to explore how digital information can be physically represented. Popular applications of fab lab tools include 3D printers for plastic or plaster parts, 3-axis CNC machines, printed circuit board milling, and microprocessor design stations. Maker spaces and Maker Faires also provide shared resources for digital fabrication and community collaboration around new technologies. 3D Hubs is an online service that connects users to over 20,000 3D printing locations worldwide, creating an interactive community for 3D printing projects and discussion.
Makers, Hackers and Gamers
Makers, hackers, and gamers are groups representing technology-based extensions of crafts and DIY culture. Makers engage in activities like engineering, robotics, and 3D printing. Hackers participate in events like hackathons where they collaborate on software projects. Gamers enjoy gaming platforms and communities like Minecraft. These groups come together in spaces like hackerspaces which are open labs where people share resources and knowledge to build and create things.
using Open Source Hardware and Rapid Prototyping in Arts Organisations
presentation given at Art of the Digital about how organisations could use open source hardware in their organisations based upon what other people are doing.
Introduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
More Related Content
Similar to Harold Washington Innovation Lab photo tour
What’s New With 3D Design and Printing?
3D printing has been a focal point in library makerspaces for several years; however, it seems that interest in the technology has decelerated. The technology may have slowed down, but there is still a lot going on in this space, which can be overwhelming to keep up with it all. In this webinar:
- Learn what 3D printing is, how it works, and gain insight on how to implement/maintain, and to perhaps build your own 3D printer.
- Get a snapshot of some of the best 3D printers and products on the market, including an overview on resin and carbon printers.
- Discover a variety of 3D design applications to help with getting ideas to working prototypes.
- Study trends in digital scanning and other emerging 3D design/printing technologies.
- Interview an expert 3D designer/printer in the industry to get even more insight into this exciting technology.
3D Design Fundamentals
This document provides an overview of 3D printing and 3D design fundamentals. It discusses the history and process of 3D printing, different 3D printing technologies, common 3D file types, the basic 3D printing process, and tips for 3D printing. It also covers basic 3D design concepts like navigating 3D space, modeling techniques, materials, and rendering. Additionally, it introduces several free and paid 3D design applications as well as 3D printing services and repositories.
Technologies of Makerspaces
A makerspace is a community space where people can gather to work on projects using tools and expertise available. The document discusses what a makerspace is and provides examples of the types of tools, technologies, and projects typically seen in makerspaces. It outlines considerations for starting a makerspace, including determining user needs and available space, tools, and resources. The main technologies discussed include 3D printing, electronics, robotics, and wearable technology. Prototyping, electronics hobbyist projects, and teaching STEM concepts are highlighted as common activities supported by makerspaces.
Introducing 3D Design and Printing
The document provides an overview of 3D printing including what it is, the different 3D printing processes, common 3D file types, how to 3D print an object, examples of objects that can be 3D printed, select 3D printers and applications, 3D printing services, and emerging technologies like digital scanning. It also discusses how to implement and maintain a 3D printer in a library or makerspace.
Inside3DPrintingSantaClara_JerryRopelato
The document discusses the production of 3D printed architectural models. It describes the types of models that can be produced including residential, commercial, and landscape models. It outlines the 3D printing process including file preparation, 3D printing using different technologies like SLS and polyjet printing, and post-processing steps. The document provides advice for 3D printing architectural models and notes that it takes patience and iterations to get the printing process right.
Academic Libraries as Makerspace: 3D Printing and Knowledge Creation
As part of an ongoing plan to transform an underutilized science and engineering library into a lively incubator for student-faculty collaboration and innovation, staff at the University of Nevada, Reno decided to launch a bold initiative: build a 3D scanning and printing “makerspace” and make it available to the entire campus. The service has been wildly successful with 3D printers running 24 hours a day. Furthermore, positioning the library as a place that facilitates knowledge creation beyond text based tools and resources has been a game changer. Students are highly motivated to learn new skills in order to take advantage of new technologies (Lynda.com gets heavy use); they experiment and iterate quickly to perfect their designs. Even better, students from engineering are now rubbing elbows with people from fields such as biology, computer science, geology, and even art. Like the printing press and the personal computer, 3-D printers have been hailed as a revolutionary device that will ultimately transform the way the world operates.
3d printing meetup
This 3D printing meetup agenda covered the following topics in 3 sentences:
The meetup was hosted by Dreambox on February 11th at the Berkeley Skydeck to discuss 3D printing technologies and applications. Attendees could sign up online to receive 3D printing material samples and the agenda included discussions on the history and current uses of 3D printing, how to design 3D models, and examples of student 3D printing projects at UC Berkeley. Dreambox also proposed a semester-long student project to collaboratively 3D model and print scale models of major campus buildings.
3 doodler
The document discusses the 3Doodler, a pen that allows users to "doodle" in 3D by extruding plastic filaments to form 3D shapes and objects, addressing the issues of cost, size and usability that had previously limited 3D printing technology. It was successfully crowdfunded on Kickstarter, raising over $1.9 million, and its creators hope it will make 3D printing more accessible to the general public and inspire new applications.
Learn to 3D Print Right Now!
This talk was first presented at the Maryland Society for Educational Technology 2014 Common Ground conference. It is meant as an introductory talk about 3D printing and how to get started designing for 3D printing and printing even if you don't have a 3D printer.
We discuss:
* What exactly is 3D printing
* What can it do
* What it can't do
* The uses of 3D printing in fashion, architecture, food, medical devices, and tools
* Real world projects using 3D printing and everyday people
* How 3D printing can be used in the classroom
* Different types of 3D printers
* Different types of 3D printing materials
* Different software solutions for creating 3D designs
* Some 3D printing resources
Welcome to Arduino
Pete Prodoehl introduces Arduino, an open-source electronics prototyping platform used by artists, designers, hobbyists and others interested in creating interactive objects. Arduino boards can control devices like 3D printers, drones, robots and more through coding. While Arduino lacks features like an operating system, keyboard and display, it allows users to connect buttons, sensors and motors to explore physical computing through sample projects. Resources for learning and purchasing Arduino components are provided.
Programming the Real World: Javascript for Makers
Hardware is becoming easier to design and manufacture, approaching the ease of software. This presentation:
- takes you on a tour of the changes in hardware
- a crash course in building circuits
- teaches the basics of using and programming Arduino
- introduces Javascript libraries for controlling hardware and robots
- how to get involved with hardware projects
If you'd like me to present this or similar content at your event, please contact me: peter at pchristensen dot com
3D Printing & Rapid Prototyping
3D Printing aka Rapid Prototyping is a game changing technology that is changing the way that designers produce prototypes and short-run manufacturing. This presentation is part of Delvinia's internal Lunch & Learn workshops and is intended for educational purposes only.
Copy and Paste Hardware
The document discusses how the Maker movement is accelerating innovation through open source tools. It provides examples of how various simulation training tools were developed by copying designs from other open source projects and modifying them to meet specific needs. This allowed innovative solutions to be developed rapidly and at low cost. The Center for the Digital Globe (CDiG) is described as focusing on expanding international education and research through collaboration across academic disciplines.
Tinkers, Printers, & Makers: Makerspaces in the Library (November 2015)
This document discusses makerspaces in libraries. It begins by defining makerspaces and outlining the necessary equipment, which can include items like LEGO, LittleBits, 3D printers and scanners. It then examines specific 3D printer options at various price points. The rest of the document covers other tools like Raspberry Pi, considerations for implementing a makerspace in a library, as well as resources and contacts for more information.
about ALT Lab
This document provides information about altLab, a creativity lab in Lisbon, Portugal that focuses on digital fabrication, computer vision, creative robotics, soft circuits, and interactive environments. It lists various activities held at altLab such as classes, workshops, and events on topics like 3D printing, electronics, and solar robotics. It also mentions some projects created at altLab and provides details about altLab's facilities and social media presence.
Digital Fabrication.docx
For Information about technology and the Future technology
to read the article click links given below
https://www.informationtechnologys.world
https://bit.ly/3KzGyrC
Geneva Hackerspace
Hackerspaces are community-run spaces where people can gather to work on projects using tools and resources that may not be accessible to individuals. This document discusses what a hackerspace is and provides details about the Post Tenebras Lab hackerspace in Geneva, including the resources and tools available, such as 3D printers, laser cutters, electronics equipment, and more. It explains that the goals of Post Tenebras Lab are to create an open community for creating, sharing, and collaborating, as well as spreading knowledge to others. Typical activities at the space include workshops, classes, and open nights every Tuesday for community members to work on projects together.
Social Elements of 3D Printing Presentation
Fab labs are shared workspaces containing computer-controlled tools for digital fabrication and mass production. The first fab labs grew out of collaboration between MIT's Grassroots Invention Group and Center for Bits and Atoms to explore how digital information can be physically represented. Popular applications of fab lab tools include 3D printers for plastic or plaster parts, 3-axis CNC machines, printed circuit board milling, and microprocessor design stations. Maker spaces and Maker Faires also provide shared resources for digital fabrication and community collaboration around new technologies. 3D Hubs is an online service that connects users to over 20,000 3D printing locations worldwide, creating an interactive community for 3D printing projects and discussion.
Makers, Hackers and Gamers
Makers, hackers, and gamers are groups representing technology-based extensions of crafts and DIY culture. Makers engage in activities like engineering, robotics, and 3D printing. Hackers participate in events like hackathons where they collaborate on software projects. Gamers enjoy gaming platforms and communities like Minecraft. These groups come together in spaces like hackerspaces which are open labs where people share resources and knowledge to build and create things.
using Open Source Hardware and Rapid Prototyping in Arts Organisations
presentation given at Art of the Digital about how organisations could use open source hardware in their organisations based upon what other people are doing.
Similar to Harold Washington Innovation Lab photo tour (20)
Academic Libraries as Makerspace: 3D Printing and Knowledge Creation
Academic Libraries as Makerspace: 3D Printing and Knowledge Creation
Tinkers, Printers, & Makers: Makerspaces in the Library (November 2015)
Tinkers, Printers, & Makers: Makerspaces in the Library (November 2015)
using Open Source Hardware and Rapid Prototyping in Arts Organisations
using Open Source Hardware and Rapid Prototyping in Arts Organisations
Recently uploaded
Introduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Assessment and Planning in Educational technology.pptx
In an education system, it is understood that assessment is only for the students, but on the other hand, the Assessment of teachers is also an important aspect of the education system that ensures teachers are providing high-quality instruction to students. The assessment process can be used to provide feedback and support for professional development, to inform decisions about teacher retention or promotion, or to evaluate teacher effectiveness for accountability purposes.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaYour Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
Types of Herbal Cosmetics its standardization.
Physiology and chemistry of skin and pigmentation, hairs, scalp, lips and nail, Cleansing cream, Lotions, Face powders, Face packs, Lipsticks, Bath products, soaps and baby product,
Preparation and standardization of the following : Tonic, Bleaches, Dentifrices and Mouth washes & Tooth Pastes, Cosmetics for Nails.
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Recently uploaded (20)
Introduction to AI for Nonprofits with Tapp Network
Introduction to AI for Nonprofits with Tapp Network
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Assessment and Planning in Educational technology.pptx
Assessment and Planning in Educational technology.pptx
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Harold Washington Innovation Lab photo tour
- 1. Entrance to the Maker Lab
- 2. Welcome to the Chicago Public Library Maker Lab
- 3. Display Case for Chicago Innovation Award
- 4. The Weekly Schedule of Events
- 5. View from the corridor into the Maker Lab
- 6. Digital design software is available on the laptops
- 7. House Rules
- 8. 3D Printer and Laser Cut Projects
- 9. More 3D and Laser Cut Projects
- 10. 3D MakerBot Printers - Larry, Moe, & Curly
- 11. Curly Making a Project
- 12. Shemp - a different type of 3D Printer
- 14. Ziggy Stardust the CNC Router
- 15. CNC - Computer Numerical Control - To use with Wood, Plastic, and Non-Ferrous Metals
- 16. Thelma the vinyl cutter
- 17. Special White Board Paint covers the walls
- 18. The Maker Lab at the Harold Washington Library Center http://www.chipublib.org/ maker-lab/
- 19. Attribution All photos by Sisi Taken February 2015 This work is licensed under a Creative Commons Attribution- NonCommercial-ShareAlike 4.0 International License.