KEE Group is a privately held company founded in 1965 that focuses on providing innovative decorative solutions through six facilities globally. They have capabilities in plastic decoration through various printing, coating, and finishing techniques. They specialize in In-Mold Decoration (IMD) which allows pre-decorated films or shells to be inserted into injection molds. Their IMD capabilities include advanced decorations like 3D textures and the integration of touch screens. They have also learned lessons about managing tolerances and risks when designing parts for IMD.
KEE Group is a privately held company founded in 1965 that focuses on providing innovative decorative solutions through six facilities globally. They have capabilities in plastic decoration through various printing, coating, and finishing techniques. They specialize in In-Mold Decoration (IMD) which allows pre-decorated films or shells to be inserted into injection molds. Their IMD capabilities include advanced decorations like 3D textures and the integration of touch screens. They have also learned lessons about managing tolerances and risks when designing parts for IMD.
DC10 Pim den Hertog - Innovatiebeleid en kennisontwikkeling - managing servic...Jaak Vlasveld
Pim den Hertog van AMSI presenteerde tijdens de sessie Innovatiebeleid en kennisontwikkeling tijdens het Diensteninnovatie Congres 2010 (DC10) in Almere.
Dankzij onze 'One Stop Shop'-benadering kunnen onze klanten zich concentreren op hun kerntaken en kunnen ze bij één enkele partner terecht voor al hun ICT-oplossingen.
Wij adviseren, leveren, installeren en bieden ondersteuning met betrekking tot ICT-oplossingen binnen de volgende vier expertisedomeinen:
• Communication Platforms
• IT Networks
• Office Automation
• Connectivity Solutions
Wie, wat, waar is Ordina. Uw vragen worden middels deze presentatie grotendeels beantwoord.
Toch nog vragen?
Voor meer informatie kun je contact met ons opnemen via 030-6637000 of een mail sturen naar communicatie@ordina.nl.
Ab Initio is data-integratiesoftware voor het ontwerpen, ontwikkelen en beheren van alle bedrijfskritische informatieverwerkende processen. Goed schaalbaar en dus geschikt voor zowel (hele) grote als kleinere organisaties. Met Ab Initio kun je grote gegevensvolumes uit verschillende bronsystemen – en van uiteenlopende platformen – parallel en snel verwerken. Ab Initio is zonder overdrijven de (snelle) Rolls Royce onder de dataintegratietools. En FourPoints Business Intelligence is de aangewezen partner als ook jij succesvol met Ab Initio wilt werken.
Luuk Roovers, directeur Vicus eBusiness Solutions, vertelt over de online mogelijkheden van sociale media, internetmarketing, webshops en online catalogi om meer bezoekers naar uw toonzaal te trekken. Klik om de presentatie te bekijken.
Artikel op Consultancy.NL website, origineel te vinden via deze link: http://www.consultancy.nl/nieuws/atos-origin-bespaart-op-communicatiekosten-met-microsoft-lync
The document discusses adhesive bonding as an alternative joining method to welding, soldering, mechanical fasteners, and other techniques. It covers bonding theory, surface treatment methods, adhesive types, design considerations, examples of bonding applications, and trends in the industry. Success in bonding projects requires close collaboration between the customer, adhesive manufacturer, and equipment suppliers from the initial design phase.
DC10 Pim den Hertog - Innovatiebeleid en kennisontwikkeling - managing servic...Jaak Vlasveld
Pim den Hertog van AMSI presenteerde tijdens de sessie Innovatiebeleid en kennisontwikkeling tijdens het Diensteninnovatie Congres 2010 (DC10) in Almere.
Dankzij onze 'One Stop Shop'-benadering kunnen onze klanten zich concentreren op hun kerntaken en kunnen ze bij één enkele partner terecht voor al hun ICT-oplossingen.
Wij adviseren, leveren, installeren en bieden ondersteuning met betrekking tot ICT-oplossingen binnen de volgende vier expertisedomeinen:
• Communication Platforms
• IT Networks
• Office Automation
• Connectivity Solutions
Wie, wat, waar is Ordina. Uw vragen worden middels deze presentatie grotendeels beantwoord.
Toch nog vragen?
Voor meer informatie kun je contact met ons opnemen via 030-6637000 of een mail sturen naar communicatie@ordina.nl.
Ab Initio is data-integratiesoftware voor het ontwerpen, ontwikkelen en beheren van alle bedrijfskritische informatieverwerkende processen. Goed schaalbaar en dus geschikt voor zowel (hele) grote als kleinere organisaties. Met Ab Initio kun je grote gegevensvolumes uit verschillende bronsystemen – en van uiteenlopende platformen – parallel en snel verwerken. Ab Initio is zonder overdrijven de (snelle) Rolls Royce onder de dataintegratietools. En FourPoints Business Intelligence is de aangewezen partner als ook jij succesvol met Ab Initio wilt werken.
Luuk Roovers, directeur Vicus eBusiness Solutions, vertelt over de online mogelijkheden van sociale media, internetmarketing, webshops en online catalogi om meer bezoekers naar uw toonzaal te trekken. Klik om de presentatie te bekijken.
Artikel op Consultancy.NL website, origineel te vinden via deze link: http://www.consultancy.nl/nieuws/atos-origin-bespaart-op-communicatiekosten-met-microsoft-lync
The document discusses adhesive bonding as an alternative joining method to welding, soldering, mechanical fasteners, and other techniques. It covers bonding theory, surface treatment methods, adhesive types, design considerations, examples of bonding applications, and trends in the industry. Success in bonding projects requires close collaboration between the customer, adhesive manufacturer, and equipment suppliers from the initial design phase.
The document discusses achieving reliable micro interconnections with long lifetime expectations. It describes common failure mechanisms for solder and adhesive micro interconnects, such as fatigue, creep, corrosion and brittle fracture. It also discusses how to improve interconnect design through careful material selection, understanding failure mechanisms, analyzing stress conditions, improving product design with modeling, and exploring new technologies like laser-induced forward transfer. The goal is to create systems with enhanced lifetimes through optimized interconnect design and technology.
Benjamin Mehlmann - Fraunhofer InstituteThemadagen
This document discusses laser micro joining processes and applications in research and development. It outlines laser beam sources and beam manipulation strategies used for micro joining applications in energy storage, electronics, and lightweight construction. Current approaches in research include welding copper with spatial and temporal power modulation to increase weld depth and quality. Developments aim to enable precision melt engineering through dynamic beam manipulation and modeling of laser micro joining processes.
This document discusses organic photovoltaic (OPV) technology and the Solliance OPV Program. The program aims to develop a complete technology toolbox for OPV to improve efficiency, lifetime, and lower costs. Current status shows efficiencies over 10% in the lab but lower efficiencies in modules. The program focuses on both solution processing and evaporated OPV using scalable printing and coating techniques. The goal is to achieve over 13% cell efficiency, 5% module efficiency, and manufacturing costs below €0.50/Wp by 2015.
This document provides an overview of a presentation on organic and printed electronics. The presentation covers topics such as OLED lighting and its potential market impact if OLEDs capture 10% of the lighting replacement market. It also discusses flexible OLEDs and OPVs, noting their potential applications in rollable, wearable, and easily integrated devices. The presentation reviews roll-to-roll manufacturing processes for these applications and the importance of techniques like slot die coating to enable low-cost, large-area production. It emphasizes the need for strict contamination control in OLED manufacturing. Finally, it provides a high-level summary and introduces the Holst Centre's work on large-area printing and coating technologies.
The document provides an introduction to organic and printed electronics. It discusses several societal challenges such as an aging population, increasing costs of healthcare, food waste, and energy needs. Organic and printed electronics offer advantages like low cost production using printing processes, flexibility, and lower environmental impact. Examples of applications mentioned include flexible displays, plastic solar cells, RFID tags, and electronic textiles. The market for printed electronics is predicted to grow substantially over the coming years across various industries such as healthcare, consumer packaging, and displays.
The document discusses research on smart materials for conformable electronics and photonics being conducted by Holst Centre. Holst Centre is an independent research organization co-founded by IMEC and TNO that focuses on creating generic technologies for flexible electronics. The presentation provides an overview of Holst Centre's work on organic light-emitting diodes (OLEDs) including applications, lifetime considerations, conformable technology approaches, and a vision for conformable electronic and photonic systems featuring wearable and stretchable designs.
Avantes is a developer and manufacturer of compact spectrometers, light sources, fiber optics, and accessories. It has sold over 17,000 spectrometers since 1994 and has annual worldwide sales of 10 million euros. Avantes uses its core spectrometer technology across multiple markets including life sciences and health, industrial processes, optical diagnosis spectroscopy and imaging, safety and security, agriculture and food, and green energy and environment. The document provides examples of spectroscopy applications for Avantes' products in areas such as LED measurements, solar panel measurements, thin film measurements, blood analyses, and food quality analysis.
The document describes the development of a low-cost ammonia sensor called the miniDOAS that uses UV spectrometry. It was created to address the need for more affordable ammonia monitoring by adapting the established Differential Optical Absorption Spectroscopy (DOAS) technique using less expensive components. Testing showed it can measure ammonia concentrations comparably to the research-grade RIVM DOAS system, but at a fraction of the cost. Further development aims to commercialize the miniDOAS for wider air quality monitoring and research applications.
1) Additive manufacturing (AM) opens revolutionary opportunities for high tech equipment development by enabling new and innovative mechatronic system designs.
2) AM can help address challenges for high tech equipment like improving accuracy, productivity, and reducing costs by providing ultimate design freedom and integration capabilities.
3) For high tech systems, AM enables new solutions like lightweight, integrated, and freeform designs which conventional manufacturing cannot achieve. AM moves manufacturing from "design for manufacturing" to "manufacturing for design."
Standardization of additive manufacturing is important for three reasons: 1) properties of additively manufactured parts are not consistent according to a standard, making industrial uptake impossible; 2) the fast evolution of additive manufacturing has outpaced traditional standardization procedures; and 3) over-regulation of existing industries makes it difficult for additive manufacturing to compete as a new technology. There are active standardization efforts occurring through various international standards organizations like ISO and CEN, as well as in the US, EU, and other countries to develop standards that will enable the quality control, data processing, materials, and other aspects needed for industrial