Este documento proporciona información sobre resinas de intercambio iónico, incluyendo su historia, tipos, propiedades y procesos de tratamiento de agua industrial como la suavización, desalcalinización y desmineralización. Las resinas de intercambio iónico pueden remover iones de una solución acuosa y reemplazarlos con otros iones de la misma carga a través de un proceso de intercambio iónico. Se utilizan comúnmente en procesos industriales para tratar el agua y mejorar sus
Este documento presenta el contenido de un curso para líderes de procesos de ingeniería. Describe las responsabilidades del líder de procesos en relación con la unidad de procesos y los proyectos, incluyendo la comunicación, interfaces con otras disciplinas, seguridad y capacitación. También cubre temas como el soporte técnico, especificaciones, instructivos y la participación en estimaciones de costos y selección de proveedores.
Charla de Especificación de Bombas Centrifugas.pptBoris518712
El documento presenta una tabla de contenido propuesta para especificaciones de bombas. La tabla incluye 13 secciones clave como objetivo, definiciones, documentos de referencia, condiciones del sitio, requerimientos de diseño, materiales, accionadores, inspecciones y pruebas. El documento explica cada sección con más detalle para guiar la elaboración de especificaciones completas y rigurosas para bombas.
This document provides requirements for a Geographic Information System (GIS) to be used on a field development project. The GIS will be used as a geographic database during project execution and operations to aid decision making. It outlines GIS data that must be delivered during the project and as part of final documentation. The GIS will integrate spatial and non-spatial project data to support activities like engineering studies, installation tracking, and operations upon handover.
This new GS EP INS 106 defines the minimum requirements for installing instruments and associated equipment in one document, replacing requirements that were previously split across multiple GSs including GS EP INS 101, GS EP INS 107, and GS EP INS 900. It regroups all instrument installation requirements into a single GS, and cancels GS EP INS 107.
This document provides instrumentation guidelines for designing plant and control rooms. It references another Total GS EP TEC document and adds additional requirements for design life. The document gives guidance on instrumentation for industrial facility design.
GS EP INS 150 Modification follow-up.pptxBoris518712
This document summarizes revisions made to GS EP INS 150 - Design Method for System Configuration Standard Functions, including: updating abbreviations and definitions; referring to a new HMI standard; moving alarms and event management to the new HMI standard; adding new general principles; and updating the list of standard functions.
GS EP INS 196 Modification follow-up.pptxBoris518712
This document summarizes updates made to standard input and output functions in GS EP INS 196. Key changes include updated interface sketches and clarified terminology for maintenance and safety functions. Safety inputs like DIS, DIS_LM and AIS now include startup inhibit counting timers and simplified maintenance functions. Process control inputs and outputs such as AI, DI and DO were also updated with new representations, clarified definitions, and added features like square root extraction for AIs.
Este documento proporciona información sobre resinas de intercambio iónico, incluyendo su historia, tipos, propiedades y procesos de tratamiento de agua industrial como la suavización, desalcalinización y desmineralización. Las resinas de intercambio iónico pueden remover iones de una solución acuosa y reemplazarlos con otros iones de la misma carga a través de un proceso de intercambio iónico. Se utilizan comúnmente en procesos industriales para tratar el agua y mejorar sus
Este documento presenta el contenido de un curso para líderes de procesos de ingeniería. Describe las responsabilidades del líder de procesos en relación con la unidad de procesos y los proyectos, incluyendo la comunicación, interfaces con otras disciplinas, seguridad y capacitación. También cubre temas como el soporte técnico, especificaciones, instructivos y la participación en estimaciones de costos y selección de proveedores.
Charla de Especificación de Bombas Centrifugas.pptBoris518712
El documento presenta una tabla de contenido propuesta para especificaciones de bombas. La tabla incluye 13 secciones clave como objetivo, definiciones, documentos de referencia, condiciones del sitio, requerimientos de diseño, materiales, accionadores, inspecciones y pruebas. El documento explica cada sección con más detalle para guiar la elaboración de especificaciones completas y rigurosas para bombas.
This document provides requirements for a Geographic Information System (GIS) to be used on a field development project. The GIS will be used as a geographic database during project execution and operations to aid decision making. It outlines GIS data that must be delivered during the project and as part of final documentation. The GIS will integrate spatial and non-spatial project data to support activities like engineering studies, installation tracking, and operations upon handover.
This new GS EP INS 106 defines the minimum requirements for installing instruments and associated equipment in one document, replacing requirements that were previously split across multiple GSs including GS EP INS 101, GS EP INS 107, and GS EP INS 900. It regroups all instrument installation requirements into a single GS, and cancels GS EP INS 107.
This document provides instrumentation guidelines for designing plant and control rooms. It references another Total GS EP TEC document and adds additional requirements for design life. The document gives guidance on instrumentation for industrial facility design.
GS EP INS 150 Modification follow-up.pptxBoris518712
This document summarizes revisions made to GS EP INS 150 - Design Method for System Configuration Standard Functions, including: updating abbreviations and definitions; referring to a new HMI standard; moving alarms and event management to the new HMI standard; adding new general principles; and updating the list of standard functions.
GS EP INS 196 Modification follow-up.pptxBoris518712
This document summarizes updates made to standard input and output functions in GS EP INS 196. Key changes include updated interface sketches and clarified terminology for maintenance and safety functions. Safety inputs like DIS, DIS_LM and AIS now include startup inhibit counting timers and simplified maintenance functions. Process control inputs and outputs such as AI, DI and DO were also updated with new representations, clarified definitions, and added features like square root extraction for AIs.
This document defines the training requirements for personnel who oversee helicopter operations on offshore and onshore helidecks, called Helicopter Landing Officers (HLO) and Helideck Assistants (HDA). It outlines the roles and responsibilities of HLOs and HDAs, and provides criteria for training programs, including general requirements and program content for HLO and HDA training. The document was revised to include HDA roles and criteria, update reference documents, and clarify HLO roles and training validity.
This document outlines personnel specifications for helicopter contractors, including requirements for flight crews, cabin crews, and engineers. It specifies minimum standards for items like crew composition, qualifications, experience, training, duty times, and rest periods. The revisions update age limits, introduce new qualifications for operations without passengers, revise pilot experience alternatives, increase required yearly simulator training, and replace some duty/rest time limits with a requirement to have a pertinent policy on duty and rest times.
This document outlines Total E&P's policy for marine berthing and navigation aids for coastal and offshore terminals. It provides general requirements for berthing and navigation aids to assist terminal pilots during transit to terminals and tanker loading/offloading operations. The purpose is to improve safety and efficiency of marine operations and reduce collision risk. It covers the scope, reference documents, definitions, technical requirements, equipment descriptions, location, and operating modes for pilots, terminals, and tugs during floating facility, berth, and coastal navigation operations.
This document provides guidelines for tanker loading and offloading marine procedures. It defines basic principles for developing safe and efficient loading and offloading configurations. The procedures apply to tankers that ship hydrocarbons, liquefied gases, or chemicals in bulk and involve mooring to jetties, buoys, and floating production storage and offloading units. The document covers operational requirements, general descriptions, and recommendations for different phases of loading and offloading operations.
This document provides guidance for electronic surveillance systems used to monitor offshore installations and vessels near offshore fields. It outlines that offshore oilfields and terminals managed by the company or contractors must be equipped with electronic surveillance systems including radar, ARPA, ECDIS, AIS, and radio systems. These systems are intended to increase safety, protect installations from collision, and help traffic controllers monitor and regulate vessel movements according to international regulations. The document establishes standards and responsibilities for surveillance equipment and traffic controllers.
This document defines rules for selecting personal floating devices like immersion suits, anti-exposure suits, life jackets, and work vests for offshore installations. It applies to all exploration and production subsidiaries when national rules do not cover an area or are less stringent. The document contains reference materials, acronyms, definitions, specifications for escape and evacuation devices, devices for personnel transfer by watercraft, and devices for working overboard. It aims to update rules for escape and evacuation and for personnel transfer and working overboard. This revision aims to clarify requirements, reduce requests for exceptions, and specify equipment in line with best practices.
This document summarizes the changes made in Revision 03 of GS EP SAF 341 on the location and protection of onshore hydrocarbon storage. The main changes include integrating 12 design requirements from the Buncefield explosion, simplifying the document by avoiding repetitions, and generally revising sections based on updated regulations. It overviews the 12 design requirements, describes revisions related to the Buncefield explosion findings, and notes other sections that were simplified, updated, or had new information added, such as for particular storage cases.
This document outlines an obsolescence management plan for a subsea production control system developed jointly by several oil and gas operators and manufacturers. The plan was revised based on input from the collaborating operators and subsea system manufacturers to provide a common approach that will be used by all participating parties.
This document summarizes updates made to GS EP TEL 120 06, which governs point to point microwave links. The updates were necessary to align with evolving technology and standards, and remove redundancy with other documents. Key changes included increasing supported data rates, revising listed norms and standards, adding the option for auto-tracking stabilized antennas for offshore links, and simplifying duplicated technical requirements and documents.
This document summarizes changes made to GS EP TEL 190 05 regarding offshore optical fiber based telecommunications. The changes include: updating references to comply with general specifications for pre-commissioning and commissioning, generally updating to follow evolving standards. Specifically, the changes update references to Opercom documents, delete redundant appendixes now covered by Opercom references, and add specifications for splicing boxes in hazardous areas.
The document summarizes updates made to GS EP TEL 191 03 - TELECOM FIBRE OPTIC SYSTEM DESIGN from 2013. The updates included:
1) Updating references to comply with other General Specification documents.
2) Updating references to follow improvements in technology and evolution of standards.
3) Increasing requirements for system availability.
El documento habla sobre los aspectos a considerar para la elaboración de una hoja de datos para grúas puentes, incluyendo los tipos de grúas puentes, componentes, requisitos de diseño y la información que debe incluir la hoja de datos para el fabricante como las dimensiones, especificaciones de carga, controles y seguridad.
El documento describe diferentes tipos de bridas y empaquetaduras, así como sus usos. Explica que las bridas conectan tuberías y equipos, y que las empaquetaduras crean un sellado entre las bridas. También cubre normas industriales, selección de materiales, instalación y rendimiento de las empaquetaduras.
This document defines the training requirements for personnel who oversee helicopter operations on offshore and onshore helidecks, called Helicopter Landing Officers (HLO) and Helideck Assistants (HDA). It outlines the roles and responsibilities of HLOs and HDAs, and provides criteria for training programs, including general requirements and program content for HLO and HDA training. The document was revised to include HDA roles and criteria, update reference documents, and clarify HLO roles and training validity.
This document outlines personnel specifications for helicopter contractors, including requirements for flight crews, cabin crews, and engineers. It specifies minimum standards for items like crew composition, qualifications, experience, training, duty times, and rest periods. The revisions update age limits, introduce new qualifications for operations without passengers, revise pilot experience alternatives, increase required yearly simulator training, and replace some duty/rest time limits with a requirement to have a pertinent policy on duty and rest times.
This document outlines Total E&P's policy for marine berthing and navigation aids for coastal and offshore terminals. It provides general requirements for berthing and navigation aids to assist terminal pilots during transit to terminals and tanker loading/offloading operations. The purpose is to improve safety and efficiency of marine operations and reduce collision risk. It covers the scope, reference documents, definitions, technical requirements, equipment descriptions, location, and operating modes for pilots, terminals, and tugs during floating facility, berth, and coastal navigation operations.
This document provides guidelines for tanker loading and offloading marine procedures. It defines basic principles for developing safe and efficient loading and offloading configurations. The procedures apply to tankers that ship hydrocarbons, liquefied gases, or chemicals in bulk and involve mooring to jetties, buoys, and floating production storage and offloading units. The document covers operational requirements, general descriptions, and recommendations for different phases of loading and offloading operations.
This document provides guidance for electronic surveillance systems used to monitor offshore installations and vessels near offshore fields. It outlines that offshore oilfields and terminals managed by the company or contractors must be equipped with electronic surveillance systems including radar, ARPA, ECDIS, AIS, and radio systems. These systems are intended to increase safety, protect installations from collision, and help traffic controllers monitor and regulate vessel movements according to international regulations. The document establishes standards and responsibilities for surveillance equipment and traffic controllers.
This document defines rules for selecting personal floating devices like immersion suits, anti-exposure suits, life jackets, and work vests for offshore installations. It applies to all exploration and production subsidiaries when national rules do not cover an area or are less stringent. The document contains reference materials, acronyms, definitions, specifications for escape and evacuation devices, devices for personnel transfer by watercraft, and devices for working overboard. It aims to update rules for escape and evacuation and for personnel transfer and working overboard. This revision aims to clarify requirements, reduce requests for exceptions, and specify equipment in line with best practices.
This document summarizes the changes made in Revision 03 of GS EP SAF 341 on the location and protection of onshore hydrocarbon storage. The main changes include integrating 12 design requirements from the Buncefield explosion, simplifying the document by avoiding repetitions, and generally revising sections based on updated regulations. It overviews the 12 design requirements, describes revisions related to the Buncefield explosion findings, and notes other sections that were simplified, updated, or had new information added, such as for particular storage cases.
This document outlines an obsolescence management plan for a subsea production control system developed jointly by several oil and gas operators and manufacturers. The plan was revised based on input from the collaborating operators and subsea system manufacturers to provide a common approach that will be used by all participating parties.
This document summarizes updates made to GS EP TEL 120 06, which governs point to point microwave links. The updates were necessary to align with evolving technology and standards, and remove redundancy with other documents. Key changes included increasing supported data rates, revising listed norms and standards, adding the option for auto-tracking stabilized antennas for offshore links, and simplifying duplicated technical requirements and documents.
This document summarizes changes made to GS EP TEL 190 05 regarding offshore optical fiber based telecommunications. The changes include: updating references to comply with general specifications for pre-commissioning and commissioning, generally updating to follow evolving standards. Specifically, the changes update references to Opercom documents, delete redundant appendixes now covered by Opercom references, and add specifications for splicing boxes in hazardous areas.
The document summarizes updates made to GS EP TEL 191 03 - TELECOM FIBRE OPTIC SYSTEM DESIGN from 2013. The updates included:
1) Updating references to comply with other General Specification documents.
2) Updating references to follow improvements in technology and evolution of standards.
3) Increasing requirements for system availability.
El documento habla sobre los aspectos a considerar para la elaboración de una hoja de datos para grúas puentes, incluyendo los tipos de grúas puentes, componentes, requisitos de diseño y la información que debe incluir la hoja de datos para el fabricante como las dimensiones, especificaciones de carga, controles y seguridad.
El documento describe diferentes tipos de bridas y empaquetaduras, así como sus usos. Explica que las bridas conectan tuberías y equipos, y que las empaquetaduras crean un sellado entre las bridas. También cubre normas industriales, selección de materiales, instalación y rendimiento de las empaquetaduras.
2. GS EP INS 197 – Process Standard Functions
This GS revision incorporates the following updates:
All Standard Functions:
Interface sketches updated.
All standard functions edited to make the requirements clearer, number of pages
reduced from 118 to 78.
Animation examples updated and added.
PCS and valve typicals now use the term « maintenance mode », related treatment
and animation are unchanged.
GS EP INS 197 – Fiche de suivi - Octobre 2014 2
3. GS EP INS 197 – Process Standard Functions
Specific Standard Functions:
PID Process Shutdown function updated with permanent or pulsed forcing.
PID_RD simplification, no more upper level control forcing both control valves into
service.
GCF simplification of fallback values.
TOT explanation of requirements and animation for current day and previous day totals
developed. Averaging of flow, pressure and temperature values removed.
MOT Option removed for motor operation counter (running hours kept).
MOT animation of MCC fault / unavailable moved from pump body to internal frame.
MOT animation examples for safety view added.
MOT maintenance inhibit function removed.
Pump Unit alternatives reduced from 5 to 4. Sketches added to explain each alternative.
Pump Unit and D/B/S sequence charts removed, replaced with clearer text description.
D/B/S option of driving MOT typical directly is removed, D/B/S should normally be used
with Pump Unit.
XV valve operation counter option removed.
GS EP INS 197 – Fiche de suivi - Octobre 2014 3