This document provides specifications for an AC 3 Phase 8040 TENV motor with a 230V 50Hz voltage and 1350RPM speed connected to a RA 2600T 40:1 ratio gearbox. The motor has a rating of 33.7RPM and 76.3lb-in of torque at 0.44 amps of current and 30 watts of output power. Charts show torque and efficiency at varying speeds both when cold and hot. The motor is intended for continuous duty and has an efficiency of 51% for the motor alone and 28.6% for the overall system. It produces a start/stall current of 1.17 amps and 191.53 lb-in of torque. The motor and gear

1. Prepared by: Groschopp.com 02/24/14
Motor:
Voltage:
Speed:
Gearbox:
AC 3 Ph 8040 TENV
230 v 50 Hz
1350 rpm 4 Poles
RA 2600T 40:1 Ratio
Product ID: 74525
SPECIFICATIONS
Rating:
Speed:
Torque:
Current:
Output:
Output:
33.7 rpm
76.3lb-in
0.44 amps
30 watts
0.0408 HP
Breakdown (Cold):
Speed:
Torque:
16.8 rpm
205.72 lb-in
Pullup (Cold):
Speed:
Torque:
0.9 rpm
191.32lb-in
Duty Cycle:
On:
Off:
Continuous
Efficiency:
Gearbox:
Motor:
System:
56.1 %
51.0 %
28.6 %
Start/Stall Conditions:
Current:
Torque:
1.17 amps
191.53 lb-in
Torque (lb-in)
Speed
RPM
Efficiency
4.0
0.0
0.0
25.0
8.0
50.0
12.0
75.0
16.0
100.0
20.0
125.0
24.0
150.0
28.0
175.0
32.0
200.0
36.0
225.0
90.0
80.0
70.0
60.0
50.0
40.0
30.0
20.0
10.0
Speed, Efficiency Vs. Torque
Cold
Hot
Notes:
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com