Groschopp 10343 specsheet
•
0 likes•33 views
This document provides specifications for a PM 6015 motor with a 7.5:1 RA 3000T gearbox. Key specifications include a voltage of 115V, speed of 325.7 rpm, torque of 3.1 lb-in, current of 0.63 amps, and power output of 12 watts. Charts show torque, speed, efficiency, and speed vs efficiency performance data. The motor has a 60.2% efficiency while the gearbox is 31.7% efficient, resulting in a combined system efficiency of 19.1%.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 10337 specsheet
This document provides specifications for a small electric motor system including a PM 6015 motor rated at 115V operating at 488.6 rpm, with a 5:1 ratio RA 2600T gearbox. Key specifications listed are the motor voltage, speed, current, output torque, power and efficiency along with gearbox and system efficiencies. A graph shows torque, speed and efficiency curves. The motor system is sold and serviced by Electromate.
Groschopp 10353 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 2500 rpm speed and RA 2600T 60:1 ratio gearbox. The motor has a rated speed of 42.5 rpm, torque of 43.0 lb-in, and efficiency of 73.7% for the motor alone and 26.4% for the overall system. Start/stall conditions are listed as 2.98 amps current and 305.16 lb-in torque. Performance curves are provided for torque, speed, efficiency and RPM. The motor is sold and serviced by Electromate.
Groschopp 10355 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 2500 RPM and 2 pole configuration paired with a RA 3000T 40:1 ratio gearbox. Key specifications include a no-load speed of 63.7 RPM, max torque of 33.6 lb-in, start/stall current of 2.98 amps and start/stall torque of 254.6 lb-in. Charts show torque, speed, and efficiency at varying loads. The system has an efficiency of 31% and is intended for continuous duty operation.
Groschopp 10347 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 2500 rpm rating and 7.5:1 ratio RA 2600T gearbox. Key specifications include a 339.7 rpm output speed, 5.6 lb-in output torque, and 27.3% system efficiency. Start/stall conditions are listed as 2.98 amps current and 59.49 lb-in torque. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 10341 specsheet
The document provides specifications for a PM 6015 motor with a 40:1 RA 2600T gearbox. It lists the motor and gearbox components, ratings for speed, torque, current, output, and duty cycle. Charts show torque and efficiency at varying speeds. The motor has a 115V voltage, 2450 RPM speed, and the gearbox provides a 61.1 RPM output speed with 17.0 lb-in of torque. The system efficiency is 19.5%.
Groschopp 10335 specsheet
This document provides specifications for a PM 6015 motor with a RA 2600T 60:1 ratio gearbox. Key specifications include a voltage of 90V DC, speed of 1600 RPM, output speed of 26.1 RPM, torque of 48.0 lb-in, current of 0.70 amps, and efficiency of 25.6% for the system. Performance curves are provided showing torque, speed, and efficiency over a range of RPMs. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 10354 specsheet
This document provides specifications for a PM 6015 motor with a RA 3000T 15:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2500 rpm, output speed of 169.9 rpm, torque of 16.0lb-in, current of 0.66 amps, and efficiency of 39.4% for the overall system. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 62314 specsheet
This document provides specifications for a PM 6015 motor with a 10:1 gearbox. The motor runs on 115V, has a no-load speed of 244.3 rpm, produces 4.1 lb-in of torque, and has an efficiency of 18.9% for the overall system. Performance curves are provided showing torque, speed, efficiency at various loads.
Recommended
Groschopp 10337 specsheet
This document provides specifications for a small electric motor system including a PM 6015 motor rated at 115V operating at 488.6 rpm, with a 5:1 ratio RA 2600T gearbox. Key specifications listed are the motor voltage, speed, current, output torque, power and efficiency along with gearbox and system efficiencies. A graph shows torque, speed and efficiency curves. The motor system is sold and serviced by Electromate.
Groschopp 10353 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 2500 rpm speed and RA 2600T 60:1 ratio gearbox. The motor has a rated speed of 42.5 rpm, torque of 43.0 lb-in, and efficiency of 73.7% for the motor alone and 26.4% for the overall system. Start/stall conditions are listed as 2.98 amps current and 305.16 lb-in torque. Performance curves are provided for torque, speed, efficiency and RPM. The motor is sold and serviced by Electromate.
Groschopp 10355 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 2500 RPM and 2 pole configuration paired with a RA 3000T 40:1 ratio gearbox. Key specifications include a no-load speed of 63.7 RPM, max torque of 33.6 lb-in, start/stall current of 2.98 amps and start/stall torque of 254.6 lb-in. Charts show torque, speed, and efficiency at varying loads. The system has an efficiency of 31% and is intended for continuous duty operation.
Groschopp 10347 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 2500 rpm rating and 7.5:1 ratio RA 2600T gearbox. Key specifications include a 339.7 rpm output speed, 5.6 lb-in output torque, and 27.3% system efficiency. Start/stall conditions are listed as 2.98 amps current and 59.49 lb-in torque. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 10341 specsheet
The document provides specifications for a PM 6015 motor with a 40:1 RA 2600T gearbox. It lists the motor and gearbox components, ratings for speed, torque, current, output, and duty cycle. Charts show torque and efficiency at varying speeds. The motor has a 115V voltage, 2450 RPM speed, and the gearbox provides a 61.1 RPM output speed with 17.0 lb-in of torque. The system efficiency is 19.5%.
Groschopp 10335 specsheet
This document provides specifications for a PM 6015 motor with a RA 2600T 60:1 ratio gearbox. Key specifications include a voltage of 90V DC, speed of 1600 RPM, output speed of 26.1 RPM, torque of 48.0 lb-in, current of 0.70 amps, and efficiency of 25.6% for the system. Performance curves are provided showing torque, speed, and efficiency over a range of RPMs. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 10354 specsheet
This document provides specifications for a PM 6015 motor with a RA 3000T 15:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2500 rpm, output speed of 169.9 rpm, torque of 16.0lb-in, current of 0.66 amps, and efficiency of 39.4% for the overall system. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 62314 specsheet
This document provides specifications for a PM 6015 motor with a 10:1 gearbox. The motor runs on 115V, has a no-load speed of 244.3 rpm, produces 4.1 lb-in of torque, and has an efficiency of 18.9% for the overall system. Performance curves are provided showing torque, speed, efficiency at various loads.
Groschopp 62443 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, output speed, torque, current, power, duty cycle, efficiency ratings, start/stall conditions, and torque-speed curve. The motor is a 115V PM 8014 operating at 2500 rpm through a 5:1 ratio gearbox. It can output 490.4 rpm and 6.1 lb-in of torque while drawing 1.17 amps of current. The gearbox efficiency is 47.3%, motor is 63.6%, and system efficiency is 30%. Startup draws 7.18 amps and produces 110.6 lb-in of torque. Performance curves show torque and efficiency at varying speeds. The motor is sold and
Groschopp 62420 specsheet
This document provides specifications for a small electric motor including its voltage, speed, gearbox ratio, torque, current draw, output power, duty cycle, efficiency rates, start/stall conditions, torque-speed curve, and contact information for the supplier. The motor runs on 115V, spins at 2450 RPM, has a 90:1 gearbox ratio, and can produce up to 38.6 lb-in of torque while drawing 0.63 amps of current.
Groschopp 62448 specsheet
This document provides specifications for a PM 8014 motor with a 115V voltage powered at 2500 rpm. The motor has a 40:1 ratio gearbox and is rated for 61.3 rpm at 68 lb-in of torque while drawing 1.17 amps of current. The gearbox and motor each have an efficiency of around 65% while the overall system efficiency is 41.5%. Startup requires 7.18 amps and generates 795 lb-in of torque. A graph shows torque and efficiency over a range of speeds.
Groschopp 10351 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 2500 rpm rating and RA 2600T 30:1 ratio gearbox. Key specifications include an output speed of 84.9 rpm, torque of 26.9 lb-in, and efficiency ratings of 44.8% for the gearbox, 73.7% for the motor, and 33% for the overall system. Start/stall conditions are listed as 2.98 amps current and 207.19 lb-in torque. Performance curves are provided for torque, speed, and efficiency. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 10352 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 2500 RPM and 2 pole configuration paired with a RA 2600T 40:1 ratio gearbox. Key specifications include an output speed of 63.7 RPM, torque of 33.6 lb-in, current of 0.66 amps, and power output of 25 watts. Start/stall conditions draw 2.98 amps and produce 241.44 lb-in of torque. Charts show torque, speed, efficiency and temperature performance data. The motor and gearbox system has an overall efficiency of 31%.
Groschopp 10311 specsheet
This document provides specifications for a PM 6015 12V DC motor with a RA 2600T 40:1 ratio gearbox. Key details include a no-load speed of 59.4 rpm, maximum torque of 26.2 lb-in, and maximum power output of 18 watts. Performance charts show torque, speed, and efficiency at varying loads. The system has a starting current of 22.45 amps, starting torque of 167.13 lb-in, and overall efficiency of 26.1%.
Groschopp 62413 specsheet
This document provides specifications for a small electric motor including its voltage, speed, gearbox ratio, output speed, torque, current draw, efficiency ratings, and start/stall conditions. Performance curves are shown plotting torque, speed, and efficiency across the operating range of the motor. The motor is identified as a PM 6015 115V motor with a 5:1 gearbox, intended to run continuously at 488.6 rpm and 1.2 lb-in of torque while drawing 0.63 amps of current.
Groschopp 62320 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 2450 RPM speed, and 90:1 ratio PL 7300 gearbox. Key specifications include a rated speed of 27.1 RPM, torque of 45.0 lb-in, and efficiencies of 38% for the gearbox, 60.2% for the motor, and 22.9% for the overall system. Start/stall conditions are listed as 2.79 amps current and 684.33 lb-in torque. Performance curves are provided showing torque, speed, RPM, and efficiency. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 10336 specsheet
This document provides specifications for a PM 6015 motor with a 7.5:1 RA 3000T gearbox. Key specifications include a voltage of 90V DC, speed of 1600 rpm, output speed of 208.7 rpm, torque of 8.3 lb-in, current of 0.70 amps, and power output of 20 watts or 0.0273 horsepower. The gearbox efficiency is 51.9%, motor efficiency is 68%, and system efficiency is 35.3%. Start/stall conditions draw 2.33 amps and produce 47.13 lb-in of torque. Performance curves show efficiency and torque over a range of speeds.
Groschopp 10327 specsheet
This document provides specifications for a PM 6015 motor with a 7.5:1 ratio RA 2600T gearbox. Key specifications include a voltage of 90V DC, speed of 2500 rpm, output speed of 331.6 rpm, torque of 4.7 lb-in, current of 0.89 amps, and power output of 18 watts. Charts show torque, speed, efficiency, and start/stall conditions over various loads on the motor and gearbox system.
Groschopp 62430 specsheet
This document provides specifications for a PM 8014 motor with a 5:1 ratio RP 7300 gearbox. Key specifications include a voltage of 115V, speed of 280 RPM, torque of 7.8 lb-in, current of 0.91 amps, and power output of 26 watts. Charts show torque, speed, and efficiency at varying loads. The motor has a efficiency of 59.5%, gearbox 51.4%, and combined system efficiency of 30.6%. Startup current is 4 amps and startup torque is 88.42 lb-in.
Groschopp 10325 specsheet
This document provides specifications for a motor and gearbox system including a PM 6015 24V DC motor with a RA 3000T 40:1 ratio gearbox. Key specifications listed include a no load speed of 59.5 rpm, torque of 34.4 lb-in, current of 3.3 amps, and power output of 24 watts or 0.0324 HP. Efficiencies are provided for the gearbox (42.3%), motor (76.1%), and overall system (32.2%). Start/stall current and torque are also specified along with torque-speed and efficiency curves. The system is sold and serviced by Electromate.
Groschopp 10317 specsheet
This document provides specifications for a PM 6015 24V DC motor with a 5:1 ratio RA 2600T gearbox. Key specifications include a no-load speed of 475.6 rpm, a rated torque of 4.7lb-in, a continuous duty cycle, and system efficiency of 35.2%. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 62434 specsheet
The document provides specifications for a PM 8014 motor with a 30:1 gearbox. It lists the motor's voltage, speed, torque, current, output power, duty cycle, and efficiency ratings. Charts show torque and efficiency at varying speeds. The motor has a start/stall current of 4 amps and torque of 503.59 lb-in. It was prepared by Groschopp.com and is sold and serviced by Electromate.
Groschopp 10337 specsheet
This document provides specifications for a small electric motor system including a PM 6015 motor rated at 115V operating at 488.6 rpm, with a 5:1 ratio RA 2600T gearbox. Key specifications listed are the motor voltage, speed, current, output torque, power and efficiency along with gearbox and system efficiencies. A graph shows torque, speed and efficiency curves. The motor system is sold and serviced by Electromate.
Groschopp 10338 specsheet
This document provides specifications for a PM 6015 motor with a 10:1 RA 2600T gearbox. Key specifications include a voltage of 115V, speed of 244.3 rpm, torque of 4.1 lb-in, current of 0.63 amps, and power output of 12 watts. Charts show torque, speed, efficiency, and start/stall conditions. The motor has a 60.2% efficiency while the gearbox is 31.0% efficient, resulting in an overall system efficiency of 18.6%.
Groschopp 10338 specsheet
This document provides specifications for a PM 6015 motor with a 10:1 RA 2600T gearbox. Key specifications include a voltage of 115V, speed of 244.3 rpm, torque of 4.1 lb-in, current of 0.63 amps, and power output of 12 watts. Charts show torque, speed, efficiency, and start/stall conditions. The motor has a 60.2% efficiency while the gearbox is 31.0% efficient, resulting in an overall system efficiency of 18.6%.
Groschopp 10345 specsheet
This document provides specifications for a small DC motor including its voltage, speed, gearbox ratio, output speed, torque, current, power, duty cycle, efficiency rates, start/stall conditions, torque-speed curve, and contact information for the supplier. The motor operates at 115V, turns at 2450rpm, includes a 25:1 gearbox, and has a rated output of 97.7rpm and 7.7lb-in of torque drawing 0.63amps.
Groschopp 10345 specsheet
This document provides specifications for a small DC motor including its voltage, speed, gearbox ratio, output speed, torque, current, power, duty cycle, efficiency rates, start/stall conditions, torque-speed curve, and supplier contact information. The motor runs at 115V, spins at 2450 RPM, has a 25:1 gearbox ratio, and outputs 97.7 RPM at 7.7 lb-in of torque while drawing 0.63 amps of current.
Groschopp 10340 specsheet
This document provides specifications for a small electric motor including its voltage, speed, gearbox ratio, output speed, torque, current, power, duty cycle, efficiency ratings, start/stall conditions, torque-speed curve, and manufacturer contact information. The motor runs on 115V, spins at 2450 RPM, has a 30:1 gearbox ratio, outputs 81.4 RPM and 13.9 lb-in of torque while drawing 0.63 amps of current. System efficiency is rated at 21.3%. Performance curves show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 10340 specsheet
This document provides specifications for a small electric motor including its voltage, speed, gearbox ratio, output speed, torque, current, power rating, duty cycle, efficiency ratings, start/stall conditions, torque-speed curve, and manufacturer contact information. The motor runs on 115V, spins at 2450 RPM, has a 30:1 gearbox ratio, outputs 81.4 RPM and 13.9 lb-in of torque while drawing 0.63 amps of current. System efficiency is rated at 21.3%. Additional details on torque, speed, current and efficiency across a range of operating points are also specified.
Groschopp 10349 specsheet
This document provides specifications for a PM 6015 motor with a RA 2600T 15:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2500 rpm, output speed of 169.9 rpm, torque of 11.2 lb-in, current of 0.66 amps, and power output of 23 watts. Charts show torque and speed vs rpm curves as well as efficiency curves for the motor, gearbox, and overall system. The motor, gearbox, and test data were prepared by Groschopp.com and the system can be purchased from Electromate.
More Related Content
What's hot
Groschopp 62443 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, output speed, torque, current, power, duty cycle, efficiency ratings, start/stall conditions, and torque-speed curve. The motor is a 115V PM 8014 operating at 2500 rpm through a 5:1 ratio gearbox. It can output 490.4 rpm and 6.1 lb-in of torque while drawing 1.17 amps of current. The gearbox efficiency is 47.3%, motor is 63.6%, and system efficiency is 30%. Startup draws 7.18 amps and produces 110.6 lb-in of torque. Performance curves show torque and efficiency at varying speeds. The motor is sold and
Groschopp 62420 specsheet
This document provides specifications for a small electric motor including its voltage, speed, gearbox ratio, torque, current draw, output power, duty cycle, efficiency rates, start/stall conditions, torque-speed curve, and contact information for the supplier. The motor runs on 115V, spins at 2450 RPM, has a 90:1 gearbox ratio, and can produce up to 38.6 lb-in of torque while drawing 0.63 amps of current.
Groschopp 62448 specsheet
This document provides specifications for a PM 8014 motor with a 115V voltage powered at 2500 rpm. The motor has a 40:1 ratio gearbox and is rated for 61.3 rpm at 68 lb-in of torque while drawing 1.17 amps of current. The gearbox and motor each have an efficiency of around 65% while the overall system efficiency is 41.5%. Startup requires 7.18 amps and generates 795 lb-in of torque. A graph shows torque and efficiency over a range of speeds.
Groschopp 10351 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 2500 rpm rating and RA 2600T 30:1 ratio gearbox. Key specifications include an output speed of 84.9 rpm, torque of 26.9 lb-in, and efficiency ratings of 44.8% for the gearbox, 73.7% for the motor, and 33% for the overall system. Start/stall conditions are listed as 2.98 amps current and 207.19 lb-in torque. Performance curves are provided for torque, speed, and efficiency. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 10352 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 2500 RPM and 2 pole configuration paired with a RA 2600T 40:1 ratio gearbox. Key specifications include an output speed of 63.7 RPM, torque of 33.6 lb-in, current of 0.66 amps, and power output of 25 watts. Start/stall conditions draw 2.98 amps and produce 241.44 lb-in of torque. Charts show torque, speed, efficiency and temperature performance data. The motor and gearbox system has an overall efficiency of 31%.
Groschopp 10311 specsheet
This document provides specifications for a PM 6015 12V DC motor with a RA 2600T 40:1 ratio gearbox. Key details include a no-load speed of 59.4 rpm, maximum torque of 26.2 lb-in, and maximum power output of 18 watts. Performance charts show torque, speed, and efficiency at varying loads. The system has a starting current of 22.45 amps, starting torque of 167.13 lb-in, and overall efficiency of 26.1%.
Groschopp 62413 specsheet
This document provides specifications for a small electric motor including its voltage, speed, gearbox ratio, output speed, torque, current draw, efficiency ratings, and start/stall conditions. Performance curves are shown plotting torque, speed, and efficiency across the operating range of the motor. The motor is identified as a PM 6015 115V motor with a 5:1 gearbox, intended to run continuously at 488.6 rpm and 1.2 lb-in of torque while drawing 0.63 amps of current.
Groschopp 62320 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 2450 RPM speed, and 90:1 ratio PL 7300 gearbox. Key specifications include a rated speed of 27.1 RPM, torque of 45.0 lb-in, and efficiencies of 38% for the gearbox, 60.2% for the motor, and 22.9% for the overall system. Start/stall conditions are listed as 2.79 amps current and 684.33 lb-in torque. Performance curves are provided showing torque, speed, RPM, and efficiency. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 10336 specsheet
This document provides specifications for a PM 6015 motor with a 7.5:1 RA 3000T gearbox. Key specifications include a voltage of 90V DC, speed of 1600 rpm, output speed of 208.7 rpm, torque of 8.3 lb-in, current of 0.70 amps, and power output of 20 watts or 0.0273 horsepower. The gearbox efficiency is 51.9%, motor efficiency is 68%, and system efficiency is 35.3%. Start/stall conditions draw 2.33 amps and produce 47.13 lb-in of torque. Performance curves show efficiency and torque over a range of speeds.
Groschopp 10327 specsheet
This document provides specifications for a PM 6015 motor with a 7.5:1 ratio RA 2600T gearbox. Key specifications include a voltage of 90V DC, speed of 2500 rpm, output speed of 331.6 rpm, torque of 4.7 lb-in, current of 0.89 amps, and power output of 18 watts. Charts show torque, speed, efficiency, and start/stall conditions over various loads on the motor and gearbox system.
Groschopp 62430 specsheet
This document provides specifications for a PM 8014 motor with a 5:1 ratio RP 7300 gearbox. Key specifications include a voltage of 115V, speed of 280 RPM, torque of 7.8 lb-in, current of 0.91 amps, and power output of 26 watts. Charts show torque, speed, and efficiency at varying loads. The motor has a efficiency of 59.5%, gearbox 51.4%, and combined system efficiency of 30.6%. Startup current is 4 amps and startup torque is 88.42 lb-in.
Groschopp 10325 specsheet
This document provides specifications for a motor and gearbox system including a PM 6015 24V DC motor with a RA 3000T 40:1 ratio gearbox. Key specifications listed include a no load speed of 59.5 rpm, torque of 34.4 lb-in, current of 3.3 amps, and power output of 24 watts or 0.0324 HP. Efficiencies are provided for the gearbox (42.3%), motor (76.1%), and overall system (32.2%). Start/stall current and torque are also specified along with torque-speed and efficiency curves. The system is sold and serviced by Electromate.
Groschopp 10317 specsheet
This document provides specifications for a PM 6015 24V DC motor with a 5:1 ratio RA 2600T gearbox. Key specifications include a no-load speed of 475.6 rpm, a rated torque of 4.7lb-in, a continuous duty cycle, and system efficiency of 35.2%. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 62434 specsheet
The document provides specifications for a PM 8014 motor with a 30:1 gearbox. It lists the motor's voltage, speed, torque, current, output power, duty cycle, and efficiency ratings. Charts show torque and efficiency at varying speeds. The motor has a start/stall current of 4 amps and torque of 503.59 lb-in. It was prepared by Groschopp.com and is sold and serviced by Electromate.
What's hot (14)
Similar to Groschopp 10343 specsheet
Groschopp 10337 specsheet
This document provides specifications for a small electric motor system including a PM 6015 motor rated at 115V operating at 488.6 rpm, with a 5:1 ratio RA 2600T gearbox. Key specifications listed are the motor voltage, speed, current, output torque, power and efficiency along with gearbox and system efficiencies. A graph shows torque, speed and efficiency curves. The motor system is sold and serviced by Electromate.
Groschopp 10338 specsheet
This document provides specifications for a PM 6015 motor with a 10:1 RA 2600T gearbox. Key specifications include a voltage of 115V, speed of 244.3 rpm, torque of 4.1 lb-in, current of 0.63 amps, and power output of 12 watts. Charts show torque, speed, efficiency, and start/stall conditions. The motor has a 60.2% efficiency while the gearbox is 31.0% efficient, resulting in an overall system efficiency of 18.6%.
Groschopp 10338 specsheet
This document provides specifications for a PM 6015 motor with a 10:1 RA 2600T gearbox. Key specifications include a voltage of 115V, speed of 244.3 rpm, torque of 4.1 lb-in, current of 0.63 amps, and power output of 12 watts. Charts show torque, speed, efficiency, and start/stall conditions. The motor has a 60.2% efficiency while the gearbox is 31.0% efficient, resulting in an overall system efficiency of 18.6%.
Groschopp 10345 specsheet
This document provides specifications for a small DC motor including its voltage, speed, gearbox ratio, output speed, torque, current, power, duty cycle, efficiency rates, start/stall conditions, torque-speed curve, and contact information for the supplier. The motor operates at 115V, turns at 2450rpm, includes a 25:1 gearbox, and has a rated output of 97.7rpm and 7.7lb-in of torque drawing 0.63amps.
Groschopp 10345 specsheet
This document provides specifications for a small DC motor including its voltage, speed, gearbox ratio, output speed, torque, current, power, duty cycle, efficiency rates, start/stall conditions, torque-speed curve, and supplier contact information. The motor runs at 115V, spins at 2450 RPM, has a 25:1 gearbox ratio, and outputs 97.7 RPM at 7.7 lb-in of torque while drawing 0.63 amps of current.
Groschopp 10340 specsheet
This document provides specifications for a small electric motor including its voltage, speed, gearbox ratio, output speed, torque, current, power, duty cycle, efficiency ratings, start/stall conditions, torque-speed curve, and manufacturer contact information. The motor runs on 115V, spins at 2450 RPM, has a 30:1 gearbox ratio, outputs 81.4 RPM and 13.9 lb-in of torque while drawing 0.63 amps of current. System efficiency is rated at 21.3%. Performance curves show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 10340 specsheet
This document provides specifications for a small electric motor including its voltage, speed, gearbox ratio, output speed, torque, current, power rating, duty cycle, efficiency ratings, start/stall conditions, torque-speed curve, and manufacturer contact information. The motor runs on 115V, spins at 2450 RPM, has a 30:1 gearbox ratio, outputs 81.4 RPM and 13.9 lb-in of torque while drawing 0.63 amps of current. System efficiency is rated at 21.3%. Additional details on torque, speed, current and efficiency across a range of operating points are also specified.
Groschopp 10349 specsheet
This document provides specifications for a PM 6015 motor with a RA 2600T 15:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2500 rpm, output speed of 169.9 rpm, torque of 11.2 lb-in, current of 0.66 amps, and power output of 23 watts. Charts show torque and speed vs rpm curves as well as efficiency curves for the motor, gearbox, and overall system. The motor, gearbox, and test data were prepared by Groschopp.com and the system can be purchased from Electromate.
Groschopp 10341 specsheet
The document provides specifications for a PM 6015 motor with a 40:1 RA 2600T gearbox. It lists the motor and gearbox components, ratings for speed, torque, current, output, and duty cycle. Charts show torque and efficiency at varying speeds. The motor has a 115V voltage, 2450 RPM speed, and the gearbox provides a 61.1 RPM output speed with 17.0 lb-in of torque. The system efficiency is 19.5%.
Groschopp 10344 specsheet
This document provides specifications for a PM 6015 motor with a 15:1 RA 3000T gearbox. Key specifications include a voltage of 115V, speed of 2450 rpm, output speed of 162.9 rpm, torque of 7.9 lb-in, current of 0.63 amps, and power output of 15 watts. Charts show torque, speed, and efficiency at varying torque levels, with the gearbox efficiency at 40%, motor at 60.2%, and overall system at 24.1%. Start/stall conditions draw 2.79 amps and produce 104.39 lb-in of torque.
Groschopp 10344 specsheet
This document provides specifications for a PM 6015 motor with a 15:1 RA 3000T gearbox. Key specifications include a voltage of 115V, speed of 2450 rpm, output speed of 162.9 rpm, torque of 7.9 lb-in, current of 0.63 amps, and power output of 15 watts. The gearbox efficiency is 40%, motor efficiency is 60.2%, and system efficiency is 24.1%. Charts show torque, speed, rpm, and efficiency at varying loads. The motor is sold and serviced by Electromate.
Groschopp 10348 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 2500 rpm and 2 pole configuration paired with a RA 2600T 10:1 ratio gearbox. Key specifications include an output speed of 254.8 rpm, torque of 7.8 lb-in, current of 0.66 amps, and power output of 24 watts or 0.0315 HP. The gearbox efficiency is 39.0%, motor efficiency is 73.7%, and system efficiency is 28.7%. Start/stall current is 2.98 amps with 85.21 lb-in of torque. Performance curves show torque, speed, and efficiency at varying RPMs. The motor and gearbox combination is sold and serviced
Groschopp 10332 specsheet
The document provides specifications for a PM 6015 motor with a 5:1 ratio RA 2600T gearbox. Key specifications include a voltage of 90V DC, speed of 313 RPM, torque of 5.1 lb-in, current of 0.7 amps, and power output of 19 watts. The motor has an efficiency of 68% and the gearbox has an efficiency of 47.8%, resulting in a system efficiency of 32.5%. Start/stall conditions are listed as 2.33 amps current and 29.48 lb-in torque. A graph shows torque, speed, RPM, and efficiency curves for the motor and gearbox system.
Groschopp 10332 specsheet
The document provides specifications for a PM 6015 motor with a 5:1 ratio RA 2600T gearbox. Key specifications include a voltage of 90V DC, speed of 313 RPM, torque of 5.1 lb-in, current of 0.7 amps, and power output of 19 watts. The motor has an efficiency of 68% and the gearbox has an efficiency of 47.8%, resulting in a system efficiency of 32.5%. Start/stall conditions are listed as 2.33 amps current and 29.48 lb-in torque. A graph shows torque, speed, RPM, and efficiency curves for the motor and gearbox system.
Groschopp 10346 specsheet
This document provides specifications for a PM 6015 130V DC motor with a 5:1 ratio RA 2600T gearbox. Key specifications include a no-load speed of 509.6 rpm, a no-load torque of 4.6 lb-in, a continuous duty cycle, and system efficiency of 33.8%. Performance curves show torque, speed, and efficiency over a range of torque values from 0-60 lb-in.
Groschopp 62314 specsheet
This document provides specifications for a PM 6015 motor with a 10:1 gearbox. The motor runs on 115V, has a no-load speed of 244.3 RPM, and can produce up to 4.1 lb-in of torque. Performance metrics are given like current, output power, efficiency, torque-speed curves, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 10342 specsheet
This document provides specifications for a small electric motor system including a PM 6015 motor rated at 115V operating at 2450 RPM, paired with a 60:1 ratio RA 2600T gearbox. Key specs listed are a no-load speed of 40.7 RPM, max torque of 19.4 lb-in, max current of 0.63A, and maximum power output of 9W or 0.0125HP. Charts show torque and efficiency curves across a range of speeds. The system has an overall efficiency of 14.8% and is intended for continuous duty operation.
Groschopp 10342 specsheet
This document provides specifications for a small electric motor system including a PM 6015 motor rated at 115V operating at 2450 RPM, paired with a 60:1 ratio RA 2600T gearbox. Key specs listed are a no-load speed of 40.7 RPM, stall torque of 281.23 lb-in, and maximum efficiencies of 24.6% for the gearbox, 60.2% for the motor, and 14.8% for the overall system. Performance curves are provided showing torque, speed, and efficiency over a range of operating conditions. The system is sold and serviced by Electromate.
Groschopp 62318 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage powered at 2450 RPM, paired with a PL 7300 40:1 ratio gearbox. Key specifications include a no-load speed of 61.1 RPM, maximum torque of 31.9 lb-in, and maximum power output of 23 watts. Performance charts show torque, speed, and efficiency at varying loads. The motor and gearbox combination has an overall system efficiency of 36.6% with start/stall conditions drawing 2.79 amps and producing 317.97 lb-in of torque.
Groschopp 62318 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage powered at 2450 RPM, paired with a PL 7300 40:1 ratio gearbox. Key specifications include a no-load speed of 61.1 RPM, maximum torque of 31.9 lb-in, and maximum power output of 23 watts. Performance charts show torque, speed, and efficiency at varying loads. The motor and gearbox combination has an overall system efficiency of 36.6% with start/stall conditions drawing 2.79 amps and producing 317.97 lb-in of torque.
Similar to Groschopp 10343 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Securing your Kubernetes cluster_ a step-by-step guide to success !
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
20 Comprehensive Checklist of Designing and Developing a Website
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Recently uploaded (20)
Securing your Kubernetes cluster_ a step-by-step guide to success !
Securing your Kubernetes cluster_ a step-by-step guide to success !
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
20 Comprehensive Checklist of Designing and Developing a Website
20 Comprehensive Checklist of Designing and Developing a Website
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Groschopp 10343 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: PM 6015 115 v FWR 2450 rpm 2 Poles RA 3000T 7.5:1 Ratio Product ID: 10343 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 325.7 rpm 3.1lb-in 0.63 amps 12 watts 0.0161 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 31.7 % 60.2 % 19.1 % Start/Stall Conditions: Current: Torque: 2.79 amps 54.78 lb-in Constants: Ke: 43.81 v/krpm Kt: 3.70 lb-in/amp Torque (lb-in) Speed RPM Efficiency 40.0 0.0 0.0 6.0 80.0 12.0 120.0 18.0 160.0 24.0 200.0 30.0 240.0 36.0 280.0 42.0 320.0 48.0 360.0 54.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com