Groschopp 02000 specsheet
•
0 likes•35 views
This document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency, start/stall conditions, and torque/speed curve. Key details are the motor's 2350 rpm speed at 2 poles, 70.4% maximum efficiency, 61.82 amps and 22 lb-in starting torque, and operation range from 0-2400 rpm producing 0-20 lb-in of torque. The motor, identified as product 2000, is manufactured by Groschopp.com.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 01000 specsheet
This document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency, start/stall conditions, and torque and efficiency curves plotted against speed. Key specifications are a no-load speed of 2400 rpm, maximum torque of 1.7 lb-in, maximum current of 5.9 amps, continuous duty cycle, and peak efficiency of 68.2%. Performance curves show torque and efficiency at varying speeds from 0 to 3600 rpm.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Performance charts show torque and efficiency across various speeds. The motor is sold and serviced by Electromate.
Groschopp 01013 specsheet
This document provides specifications for a PM 6013 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. Key specifications include a rating of 1685 RPM, torque of 1.4 lb-in, current of 0.54 amps, output of 28 watts and 0.038 HP. The motor has a continuous duty cycle and efficiency of 58.7%. Start/stall conditions are 2.19 amps current and 6.94 lb-in torque. A graph shows torque and efficiency at various speeds. The motor is sold and serviced by Electromate.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, and 1.42 amps of current. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start/stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power and produces 108 watts of power at 2575 rpm with 71.7% efficiency. It can output a maximum torque of 28.49 lb-in but requires 11.37 amps of current to start or stall. Charts show the motor's torque and efficiency performance across a range of speeds.
Groschopp 01001 specsheet
This document provides specifications for a PM 6015 motor that operates at 24V DC with a maximum speed of 2400 rpm. The motor produces 2.0 lb-in of torque at its rated speed of 2378 rpm, has a continuous duty cycle, and a maximum efficiency of 76.1%. It requires 3.1 amps of current and can produce start/stall torque of 9.38 lb-in while drawing 14.69 amps of current. Charts show the motor's torque and efficiency characteristics across a range of speeds.
Groschopp 02005 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed output. Key details are that it is a 115V motor that runs at 2500 rpm, produces 0.1012 HP (75W) of power at 2452 rpm, and has a maximum efficiency of 63.6%. Charts show its torque and efficiency output across a range of speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Recommended
Groschopp 01000 specsheet
This document provides specifications for a 12V DC motor including its voltage, speed, torque, current, output, duty cycle, efficiency, start/stall conditions, and torque and efficiency curves plotted against speed. Key specifications are a no-load speed of 2400 rpm, maximum torque of 1.7 lb-in, maximum current of 5.9 amps, continuous duty cycle, and peak efficiency of 68.2%. Performance curves show torque and efficiency at varying speeds from 0 to 3600 rpm.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Performance charts show torque and efficiency across various speeds. The motor is sold and serviced by Electromate.
Groschopp 01013 specsheet
This document provides specifications for a PM 6013 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. Key specifications include a rating of 1685 RPM, torque of 1.4 lb-in, current of 0.54 amps, output of 28 watts and 0.038 HP. The motor has a continuous duty cycle and efficiency of 58.7%. Start/stall conditions are 2.19 amps current and 6.94 lb-in torque. A graph shows torque and efficiency at various speeds. The motor is sold and serviced by Electromate.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, and 1.42 amps of current. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start/stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power and produces 108 watts of power at 2575 rpm with 71.7% efficiency. It can output a maximum torque of 28.49 lb-in but requires 11.37 amps of current to start or stall. Charts show the motor's torque and efficiency performance across a range of speeds.
Groschopp 01001 specsheet
This document provides specifications for a PM 6015 motor that operates at 24V DC with a maximum speed of 2400 rpm. The motor produces 2.0 lb-in of torque at its rated speed of 2378 rpm, has a continuous duty cycle, and a maximum efficiency of 76.1%. It requires 3.1 amps of current and can produce start/stall torque of 9.38 lb-in while drawing 14.69 amps of current. Charts show the motor's torque and efficiency characteristics across a range of speeds.
Groschopp 02005 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed output. Key details are that it is a 115V motor that runs at 2500 rpm, produces 0.1012 HP (75W) of power at 2452 rpm, and has a maximum efficiency of 63.6%. Charts show its torque and efficiency output across a range of speeds.
Groschopp 02008 specsheet
The document provides specifications for a PM 8014 motor with a voltage of 90V DC, speed of 1700 RPM, and no gearbox. The motor has a rated speed of 1654 RPM, torque of 4.1 lb-in, current of 1.22 amps, output of 80 watts, and efficiency of 71.5%. It also lists start/stall conditions of 6.37 amps current and 23.50 lb-in torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 04302 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2350 RPM with an output of 228 watts and 0.3060 horsepower. It has a continuous duty cycle with start/stall conditions of 94.11 amps current and 72.00 lb-in torque. Charts show torque and efficiency at varying speeds.
Groschopp 04302 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2351.9 rpm with an output of 228 watts and 0.3060 horsepower. It has a continuous duty cycle with start/stall conditions of 94.11 amps current and 72.00 lb-in torque. Charts show torque and efficiency at varying speeds. The motor has a 75.5% efficiency rating and was manufactured by Groschopp.com.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power and produces 108 watts of power at 2575 rpm with 71.7% efficiency. It can output up to 28.49 lb-in of torque when drawing 11.37 amps of current during start/stall conditions. Charts show the motor's torque and efficiency performance at different speeds.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power, produces 108 watts of power, and has a continuous duty cycle and efficiency of 71.7%. Charts show the motor's torque and efficiency output across different speed ranges.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 02005 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed output. Key details are a 115V motor running at 2500 rpm that produces 0.1012 HP (75W) of power at 63.6% efficiency. Startup draws 7.18A of current and produces 25 lb-in of torque. Charts also show the motor's torque and efficiency at varying speeds.
Groschopp 02005 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed output. Key details are that it is a 115V motor running at 2500 rpm that produces 0.1012 HP (75 watts) of power at 2452 rpm with a maximum torque of 2.6 lb-in and current of 1.18 amps, and has a continuous duty cycle and efficiency of 63.6%.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, 1.42 amps of current, and 222 watts of output power. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start or stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, 1.42 amps of current, and 222 watts of output power. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start or stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Charts show torque and efficiency at different speeds. The motor has no gearbox and was produced by Groschopp.com.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Charts show torque and efficiency at different speeds. The motor has no gearbox and was produced by Groschopp.com for Product ID 2001.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show the motor's torque and efficiency across different speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 02011 specsheet
This document provides specifications for a PM 8014 motor with a rating of 0.1354 HP that operates at 3878 RPM. The motor has a torque of 2.2 lb-in, current of 1.56 amps, and power output of 101 watts. It has a continuous duty cycle and efficiency of 64.7% for both the motor and system alone. Under start or stall conditions, the motor draws 12.29 amps and produces 27.7 lb-in of torque. A graph shows torque and efficiency over a range of speeds from 0 to 4500 RPM.
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
More Related Content
Similar to Groschopp 02000 specsheet
Groschopp 04302 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2350 RPM with an output of 228 watts and 0.3060 horsepower. It has a continuous duty cycle with start/stall conditions of 94.11 amps current and 72.00 lb-in torque. Charts show torque and efficiency at varying speeds.
Groschopp 04302 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2351.9 rpm with an output of 228 watts and 0.3060 horsepower. It has a continuous duty cycle with start/stall conditions of 94.11 amps current and 72.00 lb-in torque. Charts show torque and efficiency at varying speeds. The motor has a 75.5% efficiency rating and was manufactured by Groschopp.com.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power and produces 108 watts of power at 2575 rpm with 71.7% efficiency. It can output up to 28.49 lb-in of torque when drawing 11.37 amps of current during start/stall conditions. Charts show the motor's torque and efficiency performance at different speeds.
Groschopp 02002 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. The motor runs at 2600 rpm off 90V DC power, produces 108 watts of power, and has a continuous duty cycle and efficiency of 71.7%. Charts show the motor's torque and efficiency output across different speed ranges.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 02005 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed output. Key details are a 115V motor running at 2500 rpm that produces 0.1012 HP (75W) of power at 63.6% efficiency. Startup draws 7.18A of current and produces 25 lb-in of torque. Charts also show the motor's torque and efficiency at varying speeds.
Groschopp 02005 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed output. Key details are that it is a 115V motor running at 2500 rpm that produces 0.1012 HP (75 watts) of power at 2452 rpm with a maximum torque of 2.6 lb-in and current of 1.18 amps, and has a continuous duty cycle and efficiency of 63.6%.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, 1.42 amps of current, and 222 watts of output power. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start or stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, 1.42 amps of current, and 222 watts of output power. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start or stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Charts show torque and efficiency at different speeds. The motor has no gearbox and was produced by Groschopp.com.
Groschopp 02001 specsheet
This document provides specifications for a 24V DC motor. The motor runs at 2500 rpm with a maximum torque of 4.3 lb-in. It has a continuous duty cycle and efficiency of 73.3%. Under start or stall conditions, it draws 44.41 amps of current and can produce 30.16 lb-in of torque. Charts show torque and efficiency at different speeds. The motor has no gearbox and was produced by Groschopp.com for Product ID 2001.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show torque and efficiency at various speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02004 specsheet
This document provides specifications for a PM 8014 motor including its voltage, speed, power rating, torque, current draw, efficiency ratings, and start/stall conditions. Performance charts show the motor's torque and efficiency across different speeds. The motor is rated for continuous duty and has a 68.4% efficiency without a gearbox. It was prepared by Groschopp.com and is available from Electromate.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 02003 specsheet
This document provides specifications for a PM 8014 130V DC motor with a rating of 2637 RPM, 3.8 lb-in of torque, and 1.14 amps of current. Key specifications include a continuous duty cycle, 74.2% efficiency, 8.24 amps and 29.36 lb-in starting current and torque. Charts show torque and efficiency at varying speeds from 0 to 2700 RPM. The motor has no gearbox and was produced by Groschopp.com in 2014.
Groschopp 02011 specsheet
This document provides specifications for a PM 8014 motor with a rating of 0.1354 HP that operates at 3878 RPM. The motor has a torque of 2.2 lb-in, current of 1.56 amps, and power output of 101 watts. It has a continuous duty cycle and efficiency of 64.7% for both the motor and system alone. Under start or stall conditions, the motor draws 12.29 amps and produces 27.7 lb-in of torque. A graph shows torque and efficiency over a range of speeds from 0 to 4500 RPM.
Similar to Groschopp 02000 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Recently uploaded (20)
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Groschopp 02000 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: PM 8014 12 v DC 2350 rpm 2 Poles None Product ID: 2000 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 2330.0 rpm 3.9lb-in 12.44 amps 108 watts 0.1442 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 70.4 % 70.4 % Start/Stall Conditions: Current: Torque: 61.82 amps 22.00 lb-in Constants: Ke: 4.34 v/krpm Kt: 0.37 lb-in/amp Torque (lb-in) Speed RPM Efficiency 300 0 0.0 2.5 600 5.0 900 7.5 1200 10.0 1500 12.5 1800 15.0 2100 17.5 2400 20.0 2700 22.5 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com