How To Install Silver Vapor 3-in-1 Flooring UnderlaymentBestlaminate Inc.
This illustrated guide will show you with detailed step-by-step pictures how to install Silver Vapor 3-in-1 Flooring Underlayment. (Available here: http://ow.ly/yCiNz)
How to Install the Last Row of Laminate Flooring - Installation Tutorial
- Universal Installation: This tutorial walks you a universal installation of the last row of laminate flooring. It can be used in any type of room including one that may have obstacles, cabinets or tight spaces.
Step 1: Measure the Gap: In most cases, the last row of flooring will need to be cut in order to fit the space. You will need to measure the gap between the last installed plank and the wall. Remember to factor in the expansion gap!
Tip: Measure the gap at each end of the plank to get an accurate measurement. Walls can bow in or out causing a slightly different measurement at the beginning and end of a plank.
Step 2: Expansion Gap: Be sure to exclude the expansion gap in your measurement! .25” for a room under 30 ft. in length, .5” for over 30 ft. in length. Your moldings should cover this gap.
Step 3: Mark your Plank: Once the width of the plank is determined, mark the plank with a pencil according to the cut needed. Use another plank as your straight edge guide.
Tip: If the side of the plank with a locking system is against the wall, you will want to trim the plank so it has a smooth, solid edge butting against the wall.
Step 4: Cut your Plank: Use a saw to cut the plank with the decorative side up. We recommend using a jigsaw or table saw.
Jigsaw: Use a laminate cutting blade, which has a medium tooth, downstroke blade.
Table Saw: Use a medium tooth carbide blade with upside down teeth.
Step 5: Lock in the Plank: Add spacers to the end of the plank. Tilt the plank into the locking system at a 45 degree angle.
Tip: Before installing, check to make sure the plank fits. You may have to cut more of the plank to fit if your previous cut wasn’t as precise.
Step 6: Use a Pull Bar: Use a pull bar along the side of the plank, pushing the plank down and into the locking system securely Do this along the full plank.
Hint: Depending on the locking system, you may need to connect several planks together and install all at one time. The ends may not be able to connect plank by plank.
Step 7: The Next Plank: Repeat steps 1-4 to measure and cut the next plank for installation.
Step 8: Trim the Track: In most cases, it will be hard to lock your plank in two both locking systems. You can trim the track down with a blade or end of the pull bar to prepare for gluing the planks together.
Step 9: Glue the Planks: After the track is trimmed, apply woodworkers glue on the joint. Position the next plank on an angle to connect into the locking system without lowering the edge onto the glue.
Step 10: Tap Together: Use the pull bar on the side of the plank like previously stated. To secure the first and second plank, use a tapping block to connect the ends of the first and second plank in the last row.
Step 11 – Continue Installing: Continue installing the planks until you are at the end of the row. Now you’re ready to install your moldings!
Read this General Laminate Flooring Installation & Tips Guideline that will teach you everything you need to know about laminate flooring and how to install it!
How To Install Silver Vapor 3-in-1 Flooring UnderlaymentBestlaminate Inc.
This illustrated guide will show you with detailed step-by-step pictures how to install Silver Vapor 3-in-1 Flooring Underlayment. (Available here: http://ow.ly/yCiNz)
How to Install the Last Row of Laminate Flooring - Installation Tutorial
- Universal Installation: This tutorial walks you a universal installation of the last row of laminate flooring. It can be used in any type of room including one that may have obstacles, cabinets or tight spaces.
Step 1: Measure the Gap: In most cases, the last row of flooring will need to be cut in order to fit the space. You will need to measure the gap between the last installed plank and the wall. Remember to factor in the expansion gap!
Tip: Measure the gap at each end of the plank to get an accurate measurement. Walls can bow in or out causing a slightly different measurement at the beginning and end of a plank.
Step 2: Expansion Gap: Be sure to exclude the expansion gap in your measurement! .25” for a room under 30 ft. in length, .5” for over 30 ft. in length. Your moldings should cover this gap.
Step 3: Mark your Plank: Once the width of the plank is determined, mark the plank with a pencil according to the cut needed. Use another plank as your straight edge guide.
Tip: If the side of the plank with a locking system is against the wall, you will want to trim the plank so it has a smooth, solid edge butting against the wall.
Step 4: Cut your Plank: Use a saw to cut the plank with the decorative side up. We recommend using a jigsaw or table saw.
Jigsaw: Use a laminate cutting blade, which has a medium tooth, downstroke blade.
Table Saw: Use a medium tooth carbide blade with upside down teeth.
Step 5: Lock in the Plank: Add spacers to the end of the plank. Tilt the plank into the locking system at a 45 degree angle.
Tip: Before installing, check to make sure the plank fits. You may have to cut more of the plank to fit if your previous cut wasn’t as precise.
Step 6: Use a Pull Bar: Use a pull bar along the side of the plank, pushing the plank down and into the locking system securely Do this along the full plank.
Hint: Depending on the locking system, you may need to connect several planks together and install all at one time. The ends may not be able to connect plank by plank.
Step 7: The Next Plank: Repeat steps 1-4 to measure and cut the next plank for installation.
Step 8: Trim the Track: In most cases, it will be hard to lock your plank in two both locking systems. You can trim the track down with a blade or end of the pull bar to prepare for gluing the planks together.
Step 9: Glue the Planks: After the track is trimmed, apply woodworkers glue on the joint. Position the next plank on an angle to connect into the locking system without lowering the edge onto the glue.
Step 10: Tap Together: Use the pull bar on the side of the plank like previously stated. To secure the first and second plank, use a tapping block to connect the ends of the first and second plank in the last row.
Step 11 – Continue Installing: Continue installing the planks until you are at the end of the row. Now you’re ready to install your moldings!
Read this General Laminate Flooring Installation & Tips Guideline that will teach you everything you need to know about laminate flooring and how to install it!
Types Of Curtains And Draperies,Contemporary CurtainsPalaksi Kashyap
Window covering comes with different types of curtains and draperies that are available in different creative designs. They not only provide safety but they also add attraction to the house
For more info visit at :- http://zynna.in/
Architectural Coil Metal Drapery | Metal Drapery Projects GlobaltrendsGlobal Trends
Durable and easy to clean, Global Trends Coil Drapery can be used in a variety of applications, both indoor and outdoor. Indoor, Coil Drapery doesn’t require harsh cleaners or solvents, only needing to be dusted or wiped with a cloth. The coils also do not impede air flow, thus eliminating strain on large HVAC systems. Outdoor, the metal wire mesh is solar shading, needs no paint, and can be washed with water if it becomes dirty. Global Trends Coil Drapery is manufactured with almost no waste out of up to 90% recycled materials. At the end of its life, Global Trends Coil Drapery is fully recyclable.
Reports of infant and small children deaths caused by blind or curtain cords strangulation are increasing. Ensuring your child's safety and eliminating the potential risk that these blinds cords and chains have on your young ones should be a foremost priority.
Learn more on how you can protect your children from these risks. View slides for more info or visit http://www.blindsonline.com.au.
This BellaTEX Stage Curtains Curtain Types PowerPoint has been made to help viewers learn about different types of stage curtains.
About BellaTEX:
With Dealers Across The Country, Buying Stage Curtains Doesn't Have To Be Difficult.
Buying stage curtains may not be the most glamorous job in show business but to the performers, the graduates, and the achievers who work so very hard for their moment in the spotlight... to them, the role you play matters. BellaTEX has professional dealers all across the country to make sure your new stage curtains fit properly, meet applicable fire/building codes, and are professionally installed so they look their best and perform flawlessly.
I Just Need a Curtain! Why Is It So Confusing?
Seems like buying a curtain should be easy. Then you get into it, and there are dozens of Curtain Types, hundreds of Fabric Options, trim, valances, and then decisions to make about Flame Resistance. For a PTA leader or drama teacher who may only make a purchase of this nature once or twice in a lifetime, it can feel overwhelming and a little scary--what if you make a mistake?
I Just Want to Know How Much It's Going to Cost!
To make things harder, getting a quote from a dealer can be like pulling teeth. And if you make even a small mistake in measurement or choice of options, you can be on the line for significant additional expenses to fix the problem.
Take the Confusion and Worry Out.
Fortunately, you don't have to direct the show alone. Quickly estimate how much your stage curtains may cost. Then check out our handy How to Measure Guide to obtain the information you need to get an exact quote. If you need help sorting through your options, check out our Product Details section, or let a helpful BellaTEX stage curtain expert guide you.
Purchase with Confidence.
For complete confidence, contact your local BellaTEX dealer to take advantage of our Get It Right services. In most cases, the dealer will visit your site, make recommendations, and take measurements on your behalf. When that's not possible, the dealer will walk you through the steps to do it yourself. Either way, you can then budget with confidence, knowing that we'll get it right the first time.
BellaTEX Stage Curtains provides Quality, Beauty, and Service you expect from a product which should stand the test of time.
Generic StrategyDifferentiation Newell’s goal is to incr.docxhanneloremccaffery
Generic Strategy
Differentiation
Newell’s goal is to increase its sales and profitability by offering a comprehensive range of products and reliable service to the mass retail channel. Newell has chosen to develop its product line through key acquisitions, rather than internal organic growth. The strategy succeeds based on their two-pronged approach of following an established acquisition process (Newellization) and ensuring corporate continuity across the division to support its performance in the market. This strategy helps Newell successfully diversify their portfolio of products for mass retailers
Rubbermaid Yes
VRIO-Brand awareness (good before acquisition) for Rubbermaid.
V-Product innovation capability - Rubbermaid
VRIO - Distribution efficiency - Newell.
V-Customer service.
VRIO-Newellization.
Value Chain
Example 1
How to Make and Install a Window Curtain
If you have basic sewing knowledge and access to a sewing machine, you can make a simple curtain in a short amount of time. Curtains make a big difference in the "look" of a room, adding color and style to your decor. Once the curtain is made, it's easy to hang it just where you want it. With these simple step-by-step instructions, you can: (1) measure your window and purchase the appropriate type and amount of fabric; (2) sew a simple curtain; and (3) install the curtain on your window.
Equipment and Supplies
As in any project, it helps to know what equipment and supplies you are going to need before you get started. To make the curtain, you will need the following some equipment and supplies.
First, you'll need the following tools:
· tape measure
· paper and pencil
· calculator
· work table
· iron and ironing board Also, you'll need these sewing items:
· sewing machine in good working order
· scissors
· pins
· material
· thread
· fabric marker To install a curtain inside the window frame, all you will need is a spring-tension curtain rod. To hang the curtain on the wall outside of the window frame, you will need these items:
· tape measure
· pencil
· cafe-style curtain rod and its brackets
· screw driver
· screws or molly bolts
· drill
· level Preparing to Sew the Curtain You're probably ready to start sewing right away, but there are some preliminary things you need to do first. Note: Since the size of the window determines the amount of material you will need, measure the window before you buy the material. Before you can sit down at your sewing machine and begin to sew, you must:
1. Decide what type of curtain rod you want to use.
2. Measure the window.
3. Purchase the curtain fabric and rod.
4. Cut the curtain piece out of the fabric.
Deciding what type of curtain rod to use. A simple curtain can be hung with a cafe-style curtain rod or a spring- tension rod. Mounting a spring-tension rod does not require any hardware and installs the curtain insid ...
This curtain panel has an accent border, embellished with rows of decorative stitches. Experiment with various
thread colors and stitch patterns to find the just the right combination for your home décor.
How to Make and Install a Window Curtain If you have basi.docxwellesleyterresa
How to Make and Install a Window Curtain
If you have basic sewing knowledge and access to a sewing machine, you can make a simple curtain in a short
amount of time. Curtains make a big difference in the "look" of a room, adding color and style to your decor.
Once the curtain is made, it's easy to hang it just where you want it. With these simple step-by-step
instructions, you can: (1) measure your window and purchase the appropriate type and amount of fabric; (2)
sew a simple curtain; and (3) install the curtain on your window.
Equipment and Supplies
As in any project, it helps to know what equipment and supplies you are going to need before you get started.
To make the curtain, you will need the following some equipment and supplies.
First, you'll need the following tools:
tape measure
paper and pencil
calculator
work table
iron and ironing board
Also, you'll need these sewing items:
sewing machine in good working order
scissors
pins
material
thread
fabric marker
To install a curtain inside the window frame, all you will need is a spring-tension curtain rod. To hang the
curtain on the wall outside of the window frame, you will need these items:
tape measure
pencil
cafe-style curtain rod and its brackets
screw driver
screws or molly bolts
drill
level
Preparing to Sew the Curtain
You're probably ready to start sewing right away, but there are some preliminary things you need to do first.
Note: Since the size of the window determines the amount of material you will need, measure the window
before you buy the material.
Before you can sit down at your sewing machine and begin to sew, you must:
1. Decide what type of curtain rod you want to use.
2. Measure the window.
3. Purchase the curtain fabric and rod.
4. Cut the curtain piece out of the fabric.
Deciding what type of curtain rod to use. A simple curtain can be hung with a cafe-style curtain rod or a spring-
tension rod. Mounting a spring-tension rod does not require any hardware and installs the curtain inside the
window frame. A cafe-style curtain rod must be hung with brackets that are affixed to the wall-side of the
window frame and hangs the curtain outside of the window frame, against the wall. So, before you go any
further, decide where on the window you want the curtain to hang and what kind of curtain rod you'll need to
do that.
Measuring the window. The measurements you take here will determine the success or failure of your curtain
making project. Remember the old saying: measure twice, cut once! Refer to the diagram below as you
measure your window in the following manner:
1. Get your pencil, paper, and measuring tape.
2. Decide how long or short you want the curtain to be.
3. Measure the width of the window. For a curtain that will fit inside the window frame, measure from
the inside of one corner to the inside of the other corner. F ...
The perfect pretty little skirt.
A subtle ruffle hem and a simple elastic waistband make this skirt a sweet and easy project.
It's multi-sized, with no pattern pieces. Just fill out the simple worksheet to measure, calculate, and cut.
Choose your favorite fabric and have fun sewing!
Types Of Curtains And Draperies,Contemporary CurtainsPalaksi Kashyap
Window covering comes with different types of curtains and draperies that are available in different creative designs. They not only provide safety but they also add attraction to the house
For more info visit at :- http://zynna.in/
Architectural Coil Metal Drapery | Metal Drapery Projects GlobaltrendsGlobal Trends
Durable and easy to clean, Global Trends Coil Drapery can be used in a variety of applications, both indoor and outdoor. Indoor, Coil Drapery doesn’t require harsh cleaners or solvents, only needing to be dusted or wiped with a cloth. The coils also do not impede air flow, thus eliminating strain on large HVAC systems. Outdoor, the metal wire mesh is solar shading, needs no paint, and can be washed with water if it becomes dirty. Global Trends Coil Drapery is manufactured with almost no waste out of up to 90% recycled materials. At the end of its life, Global Trends Coil Drapery is fully recyclable.
Reports of infant and small children deaths caused by blind or curtain cords strangulation are increasing. Ensuring your child's safety and eliminating the potential risk that these blinds cords and chains have on your young ones should be a foremost priority.
Learn more on how you can protect your children from these risks. View slides for more info or visit http://www.blindsonline.com.au.
This BellaTEX Stage Curtains Curtain Types PowerPoint has been made to help viewers learn about different types of stage curtains.
About BellaTEX:
With Dealers Across The Country, Buying Stage Curtains Doesn't Have To Be Difficult.
Buying stage curtains may not be the most glamorous job in show business but to the performers, the graduates, and the achievers who work so very hard for their moment in the spotlight... to them, the role you play matters. BellaTEX has professional dealers all across the country to make sure your new stage curtains fit properly, meet applicable fire/building codes, and are professionally installed so they look their best and perform flawlessly.
I Just Need a Curtain! Why Is It So Confusing?
Seems like buying a curtain should be easy. Then you get into it, and there are dozens of Curtain Types, hundreds of Fabric Options, trim, valances, and then decisions to make about Flame Resistance. For a PTA leader or drama teacher who may only make a purchase of this nature once or twice in a lifetime, it can feel overwhelming and a little scary--what if you make a mistake?
I Just Want to Know How Much It's Going to Cost!
To make things harder, getting a quote from a dealer can be like pulling teeth. And if you make even a small mistake in measurement or choice of options, you can be on the line for significant additional expenses to fix the problem.
Take the Confusion and Worry Out.
Fortunately, you don't have to direct the show alone. Quickly estimate how much your stage curtains may cost. Then check out our handy How to Measure Guide to obtain the information you need to get an exact quote. If you need help sorting through your options, check out our Product Details section, or let a helpful BellaTEX stage curtain expert guide you.
Purchase with Confidence.
For complete confidence, contact your local BellaTEX dealer to take advantage of our Get It Right services. In most cases, the dealer will visit your site, make recommendations, and take measurements on your behalf. When that's not possible, the dealer will walk you through the steps to do it yourself. Either way, you can then budget with confidence, knowing that we'll get it right the first time.
BellaTEX Stage Curtains provides Quality, Beauty, and Service you expect from a product which should stand the test of time.
Generic StrategyDifferentiation Newell’s goal is to incr.docxhanneloremccaffery
Generic Strategy
Differentiation
Newell’s goal is to increase its sales and profitability by offering a comprehensive range of products and reliable service to the mass retail channel. Newell has chosen to develop its product line through key acquisitions, rather than internal organic growth. The strategy succeeds based on their two-pronged approach of following an established acquisition process (Newellization) and ensuring corporate continuity across the division to support its performance in the market. This strategy helps Newell successfully diversify their portfolio of products for mass retailers
Rubbermaid Yes
VRIO-Brand awareness (good before acquisition) for Rubbermaid.
V-Product innovation capability - Rubbermaid
VRIO - Distribution efficiency - Newell.
V-Customer service.
VRIO-Newellization.
Value Chain
Example 1
How to Make and Install a Window Curtain
If you have basic sewing knowledge and access to a sewing machine, you can make a simple curtain in a short amount of time. Curtains make a big difference in the "look" of a room, adding color and style to your decor. Once the curtain is made, it's easy to hang it just where you want it. With these simple step-by-step instructions, you can: (1) measure your window and purchase the appropriate type and amount of fabric; (2) sew a simple curtain; and (3) install the curtain on your window.
Equipment and Supplies
As in any project, it helps to know what equipment and supplies you are going to need before you get started. To make the curtain, you will need the following some equipment and supplies.
First, you'll need the following tools:
· tape measure
· paper and pencil
· calculator
· work table
· iron and ironing board Also, you'll need these sewing items:
· sewing machine in good working order
· scissors
· pins
· material
· thread
· fabric marker To install a curtain inside the window frame, all you will need is a spring-tension curtain rod. To hang the curtain on the wall outside of the window frame, you will need these items:
· tape measure
· pencil
· cafe-style curtain rod and its brackets
· screw driver
· screws or molly bolts
· drill
· level Preparing to Sew the Curtain You're probably ready to start sewing right away, but there are some preliminary things you need to do first. Note: Since the size of the window determines the amount of material you will need, measure the window before you buy the material. Before you can sit down at your sewing machine and begin to sew, you must:
1. Decide what type of curtain rod you want to use.
2. Measure the window.
3. Purchase the curtain fabric and rod.
4. Cut the curtain piece out of the fabric.
Deciding what type of curtain rod to use. A simple curtain can be hung with a cafe-style curtain rod or a spring- tension rod. Mounting a spring-tension rod does not require any hardware and installs the curtain insid ...
This curtain panel has an accent border, embellished with rows of decorative stitches. Experiment with various
thread colors and stitch patterns to find the just the right combination for your home décor.
How to Make and Install a Window Curtain If you have basi.docxwellesleyterresa
How to Make and Install a Window Curtain
If you have basic sewing knowledge and access to a sewing machine, you can make a simple curtain in a short
amount of time. Curtains make a big difference in the "look" of a room, adding color and style to your decor.
Once the curtain is made, it's easy to hang it just where you want it. With these simple step-by-step
instructions, you can: (1) measure your window and purchase the appropriate type and amount of fabric; (2)
sew a simple curtain; and (3) install the curtain on your window.
Equipment and Supplies
As in any project, it helps to know what equipment and supplies you are going to need before you get started.
To make the curtain, you will need the following some equipment and supplies.
First, you'll need the following tools:
tape measure
paper and pencil
calculator
work table
iron and ironing board
Also, you'll need these sewing items:
sewing machine in good working order
scissors
pins
material
thread
fabric marker
To install a curtain inside the window frame, all you will need is a spring-tension curtain rod. To hang the
curtain on the wall outside of the window frame, you will need these items:
tape measure
pencil
cafe-style curtain rod and its brackets
screw driver
screws or molly bolts
drill
level
Preparing to Sew the Curtain
You're probably ready to start sewing right away, but there are some preliminary things you need to do first.
Note: Since the size of the window determines the amount of material you will need, measure the window
before you buy the material.
Before you can sit down at your sewing machine and begin to sew, you must:
1. Decide what type of curtain rod you want to use.
2. Measure the window.
3. Purchase the curtain fabric and rod.
4. Cut the curtain piece out of the fabric.
Deciding what type of curtain rod to use. A simple curtain can be hung with a cafe-style curtain rod or a spring-
tension rod. Mounting a spring-tension rod does not require any hardware and installs the curtain inside the
window frame. A cafe-style curtain rod must be hung with brackets that are affixed to the wall-side of the
window frame and hangs the curtain outside of the window frame, against the wall. So, before you go any
further, decide where on the window you want the curtain to hang and what kind of curtain rod you'll need to
do that.
Measuring the window. The measurements you take here will determine the success or failure of your curtain
making project. Remember the old saying: measure twice, cut once! Refer to the diagram below as you
measure your window in the following manner:
1. Get your pencil, paper, and measuring tape.
2. Decide how long or short you want the curtain to be.
3. Measure the width of the window. For a curtain that will fit inside the window frame, measure from
the inside of one corner to the inside of the other corner. F ...
The perfect pretty little skirt.
A subtle ruffle hem and a simple elastic waistband make this skirt a sweet and easy project.
It's multi-sized, with no pattern pieces. Just fill out the simple worksheet to measure, calculate, and cut.
Choose your favorite fabric and have fun sewing!
These instructions are for how I built the crawling track that we use for our infant daughter to improver her core strength and mobility. A general description of the crawling track was provided in Glenn Doman's book "How Smart is Your Baby?"
A lesson of how and why to clip inside and outside curves. Includes tips for beginner and experienced sewists.
Includes a pattern to practice clipping curves and tip sheets for handsewing and sewing with Minky-type fabrics.
Symphony’s Hospitality is a woman-owned, full-service firm that specializes in manufacturing bedding, drapery, contract fabrics, and national installations. We combine years of experience in production and management with an impeccable system that creates both functional and aesthetically pleasing interiors.
Got jewelry? Keep your adornments orderly and in clear view with this simple to-sew hanging coordinator. What about making one for sewing accessories, as well? A young lady can never be overly organized!
Carpets, rugs, blinds, shades, shutters, wooden blindsK. Power & Company
Visit our premier designer showroom offering an expansive array of area rugs, wall to wall carpeting, stair runners, hardwood and wide plank flooring, Hunter Douglas window blinds and shades, custom window treatments, and upholstery.
https://bit.ly/BabeSideDoll4u Babeside is a company that specializes in creating handcrafted reborn dolls. These dolls are designed to be incredibly lifelike, with realistic skin tones and hair, and they have become increasingly popular among collectors and those who use them for therapeutic purposes. At Babeside, we believe that our reborn dolls can provide comfort and healing to anyone who needs it.
The Healing Power of Babeside's Handcrafted Creations
Our reborn dolls are more than just beautiful pieces of art - they can also help alleviate stress, anxiety, depression, and other mental health conditions. Studies have shown that holding or cuddling a soft object like a stuffed animal or a reborn doll can release oxytocin, which is often referred to as the "love hormone." This hormone helps us feel calm and relaxed, reducing feelings of stress and anxiety.
In addition to their physical benefits, reborn dolls can also offer emotional support. For many people, having something to care for and nurture can bring a sense of purpose and fulfillment. Reborn dolls can also serve as a reminder of happy memories or loved ones who have passed away.
Welcome to the Program Your Destiny course. In this course, we will be learning the technology of personal transformation, neuroassociative conditioning (NAC) as pioneered by Tony Robbins. NAC is used to deprogram negative neuroassociations that are causing approach avoidance and instead reprogram yourself with positive neuroassociations that lead to being approach automatic. In doing so, you change your destiny, moving towards unlocking the hypersocial self within, the true self free from fear and operating from a place of personal power and love.
12. Measuring the Window
Measure the width of your window treatments,
taking into account if you want to mount
hardware on the wall or directly on the window
trim.
Allow 1 1/2quot; - 3quot; on each side of the window for
when the drapes are completely open.
Be sure to consider extra wall space needed for
decorative finials, as the rod dimensions do not
include additional width added by each finial.
To make the windows appear larger, mount the
curtain rod 6quot; above the trim and allow the rod
width to extend 3quot; beyond the window's actual
width.
13. How to Determine Drapery Length
Rod
Height
Grommets are placed ½” to 1” from the top of
the drapery.
Measure from top of rod to floor to determine
the length + ½” to 1” allowed at the top.
Deduct the ½ inch from the bottom unless
drapery is going to touch the floor.
Floor
14. Installing Hardware
Bottom of drapery rod
should be 4” to 6” above
the top of the window.
You can hang the rod as
high as you would like.
Grommets are 1 5/8” inside
diameter and the rod
should be small enough to
allow movement of the
drapery.
15. Selecting & Calculating Yardage
•Vertical Repeat 22”
•Horizontal Repeat 13.5”
•54” Wide Fabric
•Fullness of drapery fabric
should be 1.75 to 2.25 times the
finish width of the drapery
16. Formula for Calculating Yardage
1. Example - Finished Length 100” - Finished Width 90”
2. Length – add 6” for hem and 2” to fold down at top of drapery
3. Cut length would be 108”
4. Fullness – Finished width 90” x 2.25 = 202.5” Plus side hems
of 6” = 208.5”
5. Divide by fabric width of 54” = 3.86 width or 4 widths of fabric
6. 4 Widths x 108” = 432” divided by 36” (1 yard) = 12 yards
7. Repeat is 22.5” which requires 4.8 repeats for finish length – I
would order 13 yard for matching
17. SEW OR NO SEW
Sew grommet tape to drapery or use Sealah Tape (Machine
Washable)
We recommend sewing for all out door draperies because of
the environment.
21. NO SEW Grommet Draperies
•Use ½” to ¾” Sealah Tape or a Iron-
on Adhesive Tape
•Place adhesive tape on both sides of
the Grommet tape.
22. NO SEW Grommet Draperies
1. Tape lining and fabric together at top edge
of fabric
2. Fold top edge over ¾”
23. NO SEW Grommet Draperies
Lay Grommet tape on to fabric with adhesive side on fabric
Pin in place before removing adhesive tape
24. NO SEW Grommet Draperies
Slowly remove adhesive tape on each edge of the grommet tape
25. NO SEW Grommet Draperies
Leave grommet tape in place while peeling the adhesive from the bottom
26. NO SEW Grommet Draperies
1. Important tip! Make sure ring connector is at the out side end
of each side hem of your drapery
2. Now it’s time for fold your side hems – fold 1 ½” twice for the
side hem ( I recommend cutting the selvage off the Fabric)
27. NO SEW Grommet Draperies
You may sew the grommet tape to the top of the drapery
28. NO SEW Grommet Draperies
Now it is time to start cutting the fabric from the grommet wholes
29. NO SEW Grommet Draperies
Use an 18mm olfa rotary cutter to cut
around the inside of the grommet
circle.
30. NO SEW Grommet Draperies
With a rubber mallet, tap the grommet into the drapery
31. NO SEW Grommet Draperies
Using grommet tape holds the folds in place; there will be
no need for continuously dressing your draperies.
32. Sew in the Sun!
623-878-7350
Peoria, AZ
www.HomeFashionsU.com
homefashionsu@gmail.com