We supply all types of abrasive media for shot blasting machines. For more details, please visit us at www.synco.co.in or email us at trideep@synco.co.in
Trideep Raj Bhandari
Synco Industries Limited
Business plan incubation: Nano coating on solar panelsPrateek Diwan
The document proposes developing a super hydrophobic transparent coating for solar panels to reduce dust accumulation. It would work by creating nano-scale surface roughness to form air pockets, increasing water contact angles to keep surfaces clean. This could improve solar panel efficiency by 2% and increase annual profits by $14.6 million by extending the life of panels from 15 to 20 years. The coating aims to be optically transparent, self-cleaning, durable, scalable and non-toxic for commercial use on solar panels, glass, and other surfaces.
K2 Purio Pro is an interior cleaner designed to break down even the toughest dirt. It removes filth from plastic surfaces quickly and conveniently, restoring the natural appearance and texture of materials. The product is ruthless for dirt yet easy to use. It is perfect for cleaning interior parts like dashboards, door panels, and moldings without requiring dilution or rinsing. K2 Purio Pro is a ready to use interior cleaner that is 100% safe for vinyl, plastic and rubber surfaces.
Flanges in glass lined reactors are having uneven sealing surfaces and require special type of gasket in order to
seal properly. To create a proper sealing of glass lined reactors we have created specially designed TF34 gasket, a composite of PTFE envelope special high compressible sealing insert.
1. Non-silicone release coatings are applied to the backing of tapes opposite the adhesive to allow for easy unwinding and prevent delamination or tearing. Without a release coating, the tape would stick to itself.
2. Non-silicone release coatings can be coated inline during adhesive coating, unlike silicone coatings which require high-temperature curing. This allows better control over the release values.
3. The suitable release coating depends on the tape's peel strength, substrate material, and desired unwind force. The unwind force should be lower than the substrate's tensile strength to prevent elongation or tearing.
Toughtop 20 is a two-component, chemically curing aliphatic acrylic polyurethane coating for metal. It has a glossy finish, is highly flexible and impact resistant, and provides excellent adhesion, corrosion resistance, and weatherability. Toughtop 20 can be used as a topcoat on structural steel, pipelines, bridges and more in aggressive environments both onshore and offshore. It has long-term recoatability, excellent color and gloss retention, and resistance to mild chemicals.
Hexagonal Boron Nitride Aerosol Spray offers convenient way to apply thin film of coating on any surface as well as in hard to reach places. it spray is high temperature, anti-stick release agent & lubricant.
Features:
•Bonds well with substrates and forms a coating film
•Excellent lubricating properties
•Good chemical inertness
•Electrical insulator
•Thermal conductor (result: better heat dissipation)
•High temperature stability (1000 deg C in air, 1400 deg C in vacuum & 1800 deg C in inert gas)
•Low thermal expansion
•Low dielectric constant
•Non-wetting
•Contains no fluorocarbons or lead
•Not harmful to Ozone
Applications:
•Welding & Brazing: Protects from weld spatter
•Sintering: Eliminates sticking & carbon contamination
•Plastic & Rubber Molds: For release
•Glass making: Improves mold/die life
•Molten metal processing & metal forming: Inhibits corrosion
•Casting, extrusion, forging & stamping
•High temperature protective release coatings
The document discusses various defects that can occur in adhesive coatings such as oozing, blistering, cratering, cracking, contamination, and peeling. It provides examples and descriptions for each defect type. Potential causes are outlined for many of the defects, including applying too soft an adhesive, exposure to moisture after coating, using low quality or old adhesive, applying the coating too rapidly, coating at too high a temperature, and electrostatic charges attracting dirt to the coated surface. Remedies are suggested for some defects, such as using a higher quality adhesive and allowing adequate drying time between coating and exposure to other conditions.
Business plan incubation: Nano coating on solar panelsPrateek Diwan
The document proposes developing a super hydrophobic transparent coating for solar panels to reduce dust accumulation. It would work by creating nano-scale surface roughness to form air pockets, increasing water contact angles to keep surfaces clean. This could improve solar panel efficiency by 2% and increase annual profits by $14.6 million by extending the life of panels from 15 to 20 years. The coating aims to be optically transparent, self-cleaning, durable, scalable and non-toxic for commercial use on solar panels, glass, and other surfaces.
K2 Purio Pro is an interior cleaner designed to break down even the toughest dirt. It removes filth from plastic surfaces quickly and conveniently, restoring the natural appearance and texture of materials. The product is ruthless for dirt yet easy to use. It is perfect for cleaning interior parts like dashboards, door panels, and moldings without requiring dilution or rinsing. K2 Purio Pro is a ready to use interior cleaner that is 100% safe for vinyl, plastic and rubber surfaces.
Flanges in glass lined reactors are having uneven sealing surfaces and require special type of gasket in order to
seal properly. To create a proper sealing of glass lined reactors we have created specially designed TF34 gasket, a composite of PTFE envelope special high compressible sealing insert.
1. Non-silicone release coatings are applied to the backing of tapes opposite the adhesive to allow for easy unwinding and prevent delamination or tearing. Without a release coating, the tape would stick to itself.
2. Non-silicone release coatings can be coated inline during adhesive coating, unlike silicone coatings which require high-temperature curing. This allows better control over the release values.
3. The suitable release coating depends on the tape's peel strength, substrate material, and desired unwind force. The unwind force should be lower than the substrate's tensile strength to prevent elongation or tearing.
Toughtop 20 is a two-component, chemically curing aliphatic acrylic polyurethane coating for metal. It has a glossy finish, is highly flexible and impact resistant, and provides excellent adhesion, corrosion resistance, and weatherability. Toughtop 20 can be used as a topcoat on structural steel, pipelines, bridges and more in aggressive environments both onshore and offshore. It has long-term recoatability, excellent color and gloss retention, and resistance to mild chemicals.
Hexagonal Boron Nitride Aerosol Spray offers convenient way to apply thin film of coating on any surface as well as in hard to reach places. it spray is high temperature, anti-stick release agent & lubricant.
Features:
•Bonds well with substrates and forms a coating film
•Excellent lubricating properties
•Good chemical inertness
•Electrical insulator
•Thermal conductor (result: better heat dissipation)
•High temperature stability (1000 deg C in air, 1400 deg C in vacuum & 1800 deg C in inert gas)
•Low thermal expansion
•Low dielectric constant
•Non-wetting
•Contains no fluorocarbons or lead
•Not harmful to Ozone
Applications:
•Welding & Brazing: Protects from weld spatter
•Sintering: Eliminates sticking & carbon contamination
•Plastic & Rubber Molds: For release
•Glass making: Improves mold/die life
•Molten metal processing & metal forming: Inhibits corrosion
•Casting, extrusion, forging & stamping
•High temperature protective release coatings
The document discusses various defects that can occur in adhesive coatings such as oozing, blistering, cratering, cracking, contamination, and peeling. It provides examples and descriptions for each defect type. Potential causes are outlined for many of the defects, including applying too soft an adhesive, exposure to moisture after coating, using low quality or old adhesive, applying the coating too rapidly, coating at too high a temperature, and electrostatic charges attracting dirt to the coated surface. Remedies are suggested for some defects, such as using a higher quality adhesive and allowing adequate drying time between coating and exposure to other conditions.
This document discusses the proper use and application of sealants, particularly for roofing. It notes that sealants should not replace good construction practices and details, and should be used sparingly. The ideal use is between two overlapping materials to prevent water ingress. It provides guidance on selecting the appropriate sealant for the material and job, cleaning surfaces, applying the bead in a continuous smooth motion, ensuring adhesion, and protecting newly applied sealant from UV exposure.
Mesh in eva glass laminating silicone blankets avoiding clogging vacuumingZac Lynn-UCOLIN
This document discusses mesh used in silicone blankets for EVA glass laminating. The mesh has a thickness between 0.2-1.2mm and width of 300-4200mm. It helps avoid clogging in vacuuming systems by protecting the silicone blankets from sharp glass edges and overflow of EVA. The mesh also has excellent temperature resistance, chemical resistance, dimensional stability and mechanical properties that make it suitable for the laminating process.
The document discusses ways to control problems in concrete like porosity, moisture damage, and corrosion. It focuses on crystal growth liquid products that can permanently fill pores and block moisture movement in concrete. These products use hydrophilic and sometimes hygroscopic crystals to seal concrete from the inside. They continue working even under pressure and reactivate when moisture is present. The crystals provide waterproofing and protection against contaminants in a way that is environmentally friendly and long-lasting with a single application. The cost of preventative treatment with these products is compared to ongoing repair costs from doing nothing as concrete deteriorates.
Breakdown Analysis of EVA Vacuum Glass Laminating Machine Eva Glass
The document lists potential issues that may occur with an EVA glass laminating machine and proposes solutions. Common problems include uneven heating, air bubbles in the finished glass, and machine malfunctions. Suggested fixes involve ensuring proper vacuum levels, checking electrical connections, and replacing worn parts. The document also provides contact information for UCOLIN SILICONE TECH, a company that supplies silicone sheets and bags for glass laminating machines.
RTV silicone is a versatile adhesive that can be used for sealing, gasketing, molding, and other applications. It starts as a liquid but cures to a solid, flexible form that is resistant to chemicals and temperature changes. RTV silicone comes in different viscosities so it can be sprayed, brushed, or poured onto surfaces. It has a long shelf life and does not require mixing or a releasing agent. Some common uses of RTV silicone include sealing joints and openings to block water, creating molds that capture fine details, and making gaskets to create barriers against liquids, sound, and vibration.
This document provides information about Terrace Water Proofing using CHRYSO® Tapelastic. It describes Tapelastic as a two component, elastomeric acrylic polymer modified cementitious waterproofing coating that can be applied by brush, roller or spray. The benefits listed include being easy to apply, UV resistant, ready to use by mixing on site, bonding well to cementitious substrates, being suitable for potable water, and having strong resistance to chloride and sulfate attacks. It then lists domains of application such as for roofing, masonry, damp patches, and liquid retaining structures. The document concludes by describing the multi-step process of cleaning, applying primer coats of Tapelastic, embedding a fiberglass mesh, and
3M is introducing its 3MTM Glass Bubbles, a new lightweight filler made of hollow glass microspheres, which can significantly reduce the density of composites and plastics when added. 3MTM Glass Bubbles have a density as low as 0.125 g/cm3, lower than other common fillers, allowing products to be made lighter. They have been used to reduce the weight of sheet molding compounds by up to 40% and switch thermoplastics from nylon to lighter polypropylene while maintaining mechanical requirements. 3M's Glass Bubbles plant in Tilloy, France manufactures these hollow glass microspheres.
Insulator Maintenance Solutions from Project Sales CorpProject Sales Corp
Insulator Maintenance Solutions from Project Sales Corp. offers products and services for insulator maintenance:
Dow Corning provides silicone compounds like DC 5 Compound and 3099 HVIC to prevent arcing, flashovers, rust, and corrosion on insulators. LPS and Dow Corning solvents can clean insulator contamination. Devcon epoxies and ceramic products repair chipped insulators. Molykote protective coatings and LPS corrosion inhibitors prevent corrosion of metal parts like threaded joints. Project Sales Corp. can provide complete maintenance solutions from world leading brands.
Adib Rizvi - Pakistan - Monday 28 - Strategies to increase the number of cad...incucai_isodp
Societal factors in Pakistan influence deceased donor programs. These include tribal and feudal societies where family patriarchs make life and death decisions, reverence for the dead, and mistrust of the medical profession. Cultural factors also affect donor programs, such as moral views weighing treatment benefits against harms. Religious factors operational in Islamic societies include the belief that the body belongs to God and a preference for quick burial. Commercial organ trade has undermined donor programs, but new laws and societal efforts aim to establish ethical living donor transplantation. Overcoming economic, cultural, and religious hurdles remains important to maximize public awareness.
Anwar Naqvi Pakistan - Monday 28 - Management and organization models for d...incucai_isodp
This document discusses management and organization models for organ donation and transplantation in Eastern Mediterranean countries. It provides data on transplant activity and compares it to factors like human development index, public health expenditure, literacy rates, and poverty levels. It also examines religious, cultural, and social influences on donation and transplantation in these countries and discusses challenges and ways to improve systems.
Vacuum blasting equipment was developed to address environmental and health hazards from traditional blasting methods. It prevents pollution and is often economically justified for surface preparation. Vacuum blasting reduces hazardous waste by reusing abrasives, lowering abrasive usage compared to open blasting. The equipment has various applications in construction, ship maintenance, and other industries like cleaning bridges and machinery.
Organ donation involves removing organs or tissues from deceased or living donors for transplantation into other individuals. Key organs that can be donated include the heart, lungs, liver, kidneys, and pancreas. Legislation regarding organ donation varies by country, with some requiring explicit consent from donors and others assuming consent unless the donor explicitly dissents. There are ongoing ethical debates around issues such as defining death, ensuring informed consent, preventing financial exploitation of living donors, and addressing shortages in organ supply.
Organ donation involves removing tissues or organs from a living or recently deceased person for transplantation into another person. People of all ages can donate organs, and donation can occur from both living and deceased donors, though deceased organ donation provides access to more organs and must be transplanted within hours. While organ donation is voluntary in most places, systems can be opt-in, where explicit consent is required, or opt-out, where consent is assumed unless the deceased registered refusal. Common organs for donation include kidneys, liver, heart, lungs, pancreas, and corneas. However, organ shortages persist due to lack of family consent and negative public attitudes sometimes related to religion, fear, or misunderstanding.
Organ donation is the removal of the tissues of the human body from a person who has recently died, or from a living donor, for the purpose of transplanting.
This document summarizes a presentation on organ donation in India. It notes that India has one of the lowest organ donation rates in the world despite legalization over 20 years ago. Fewer than 5% of those awaiting kidneys receive transplants due to lack of donors. While some states like Tamil Nadu have higher donation rates, overall only 4-6% of hospital deaths result from brain death where organs could be donated. The document recommends increased medical research, data sharing between researchers and policymakers, and an expanded role for media in raising awareness to grow India's organ donation rates.
We supply all types of abrasive media for shot blasting machines. For more details, please visit us at www.synco.co.in or email us at trideep@synco.co.in
Trideep Raj Bhandari
Synco Industries Limited
We supply all types of metallizing guns. For more details, please visit us at www.synco.co.in or email us at trideep@synco.co.in
Trideep Raj Bhandari
Synco Industries Limited
We supply all types of metallizing guns. For more details, please visit us at www.synco.co.in or email us at trideep@synco.co.in
Trideep Raj Bhandari
Synco Industries Limtied
This document discusses the proper use and application of sealants, particularly for roofing. It notes that sealants should not replace good construction practices and details, and should be used sparingly. The ideal use is between two overlapping materials to prevent water ingress. It provides guidance on selecting the appropriate sealant for the material and job, cleaning surfaces, applying the bead in a continuous smooth motion, ensuring adhesion, and protecting newly applied sealant from UV exposure.
Mesh in eva glass laminating silicone blankets avoiding clogging vacuumingZac Lynn-UCOLIN
This document discusses mesh used in silicone blankets for EVA glass laminating. The mesh has a thickness between 0.2-1.2mm and width of 300-4200mm. It helps avoid clogging in vacuuming systems by protecting the silicone blankets from sharp glass edges and overflow of EVA. The mesh also has excellent temperature resistance, chemical resistance, dimensional stability and mechanical properties that make it suitable for the laminating process.
The document discusses ways to control problems in concrete like porosity, moisture damage, and corrosion. It focuses on crystal growth liquid products that can permanently fill pores and block moisture movement in concrete. These products use hydrophilic and sometimes hygroscopic crystals to seal concrete from the inside. They continue working even under pressure and reactivate when moisture is present. The crystals provide waterproofing and protection against contaminants in a way that is environmentally friendly and long-lasting with a single application. The cost of preventative treatment with these products is compared to ongoing repair costs from doing nothing as concrete deteriorates.
Breakdown Analysis of EVA Vacuum Glass Laminating Machine Eva Glass
The document lists potential issues that may occur with an EVA glass laminating machine and proposes solutions. Common problems include uneven heating, air bubbles in the finished glass, and machine malfunctions. Suggested fixes involve ensuring proper vacuum levels, checking electrical connections, and replacing worn parts. The document also provides contact information for UCOLIN SILICONE TECH, a company that supplies silicone sheets and bags for glass laminating machines.
RTV silicone is a versatile adhesive that can be used for sealing, gasketing, molding, and other applications. It starts as a liquid but cures to a solid, flexible form that is resistant to chemicals and temperature changes. RTV silicone comes in different viscosities so it can be sprayed, brushed, or poured onto surfaces. It has a long shelf life and does not require mixing or a releasing agent. Some common uses of RTV silicone include sealing joints and openings to block water, creating molds that capture fine details, and making gaskets to create barriers against liquids, sound, and vibration.
This document provides information about Terrace Water Proofing using CHRYSO® Tapelastic. It describes Tapelastic as a two component, elastomeric acrylic polymer modified cementitious waterproofing coating that can be applied by brush, roller or spray. The benefits listed include being easy to apply, UV resistant, ready to use by mixing on site, bonding well to cementitious substrates, being suitable for potable water, and having strong resistance to chloride and sulfate attacks. It then lists domains of application such as for roofing, masonry, damp patches, and liquid retaining structures. The document concludes by describing the multi-step process of cleaning, applying primer coats of Tapelastic, embedding a fiberglass mesh, and
3M is introducing its 3MTM Glass Bubbles, a new lightweight filler made of hollow glass microspheres, which can significantly reduce the density of composites and plastics when added. 3MTM Glass Bubbles have a density as low as 0.125 g/cm3, lower than other common fillers, allowing products to be made lighter. They have been used to reduce the weight of sheet molding compounds by up to 40% and switch thermoplastics from nylon to lighter polypropylene while maintaining mechanical requirements. 3M's Glass Bubbles plant in Tilloy, France manufactures these hollow glass microspheres.
Insulator Maintenance Solutions from Project Sales CorpProject Sales Corp
Insulator Maintenance Solutions from Project Sales Corp. offers products and services for insulator maintenance:
Dow Corning provides silicone compounds like DC 5 Compound and 3099 HVIC to prevent arcing, flashovers, rust, and corrosion on insulators. LPS and Dow Corning solvents can clean insulator contamination. Devcon epoxies and ceramic products repair chipped insulators. Molykote protective coatings and LPS corrosion inhibitors prevent corrosion of metal parts like threaded joints. Project Sales Corp. can provide complete maintenance solutions from world leading brands.
Adib Rizvi - Pakistan - Monday 28 - Strategies to increase the number of cad...incucai_isodp
Societal factors in Pakistan influence deceased donor programs. These include tribal and feudal societies where family patriarchs make life and death decisions, reverence for the dead, and mistrust of the medical profession. Cultural factors also affect donor programs, such as moral views weighing treatment benefits against harms. Religious factors operational in Islamic societies include the belief that the body belongs to God and a preference for quick burial. Commercial organ trade has undermined donor programs, but new laws and societal efforts aim to establish ethical living donor transplantation. Overcoming economic, cultural, and religious hurdles remains important to maximize public awareness.
Anwar Naqvi Pakistan - Monday 28 - Management and organization models for d...incucai_isodp
This document discusses management and organization models for organ donation and transplantation in Eastern Mediterranean countries. It provides data on transplant activity and compares it to factors like human development index, public health expenditure, literacy rates, and poverty levels. It also examines religious, cultural, and social influences on donation and transplantation in these countries and discusses challenges and ways to improve systems.
Vacuum blasting equipment was developed to address environmental and health hazards from traditional blasting methods. It prevents pollution and is often economically justified for surface preparation. Vacuum blasting reduces hazardous waste by reusing abrasives, lowering abrasive usage compared to open blasting. The equipment has various applications in construction, ship maintenance, and other industries like cleaning bridges and machinery.
Organ donation involves removing organs or tissues from deceased or living donors for transplantation into other individuals. Key organs that can be donated include the heart, lungs, liver, kidneys, and pancreas. Legislation regarding organ donation varies by country, with some requiring explicit consent from donors and others assuming consent unless the donor explicitly dissents. There are ongoing ethical debates around issues such as defining death, ensuring informed consent, preventing financial exploitation of living donors, and addressing shortages in organ supply.
Organ donation involves removing tissues or organs from a living or recently deceased person for transplantation into another person. People of all ages can donate organs, and donation can occur from both living and deceased donors, though deceased organ donation provides access to more organs and must be transplanted within hours. While organ donation is voluntary in most places, systems can be opt-in, where explicit consent is required, or opt-out, where consent is assumed unless the deceased registered refusal. Common organs for donation include kidneys, liver, heart, lungs, pancreas, and corneas. However, organ shortages persist due to lack of family consent and negative public attitudes sometimes related to religion, fear, or misunderstanding.
Organ donation is the removal of the tissues of the human body from a person who has recently died, or from a living donor, for the purpose of transplanting.
This document summarizes a presentation on organ donation in India. It notes that India has one of the lowest organ donation rates in the world despite legalization over 20 years ago. Fewer than 5% of those awaiting kidneys receive transplants due to lack of donors. While some states like Tamil Nadu have higher donation rates, overall only 4-6% of hospital deaths result from brain death where organs could be donated. The document recommends increased medical research, data sharing between researchers and policymakers, and an expanded role for media in raising awareness to grow India's organ donation rates.
We supply all types of abrasive media for shot blasting machines. For more details, please visit us at www.synco.co.in or email us at trideep@synco.co.in
Trideep Raj Bhandari
Synco Industries Limited
We supply all types of metallizing guns. For more details, please visit us at www.synco.co.in or email us at trideep@synco.co.in
Trideep Raj Bhandari
Synco Industries Limited
We supply all types of metallizing guns. For more details, please visit us at www.synco.co.in or email us at trideep@synco.co.in
Trideep Raj Bhandari
Synco Industries Limtied
We supply all types of cabinet blasting machines including pressure blasting, suction blasting and wet blasting machines.
For more details, please visit us at www.synco.co.in or email us at trideep@synco.co.in
Trideep Raj Bhandari
Synco Industries Limited
We supply all consumables and spares for sand/shot blasting including blasting hose. For more details, please visit us at www.synco.co.in or email us at trideep@synco.co.in
Trideep Raj Bhandari
Synco Industries Limited
We supply all types of metallizing guns. For more details, please visit us at www.synco.co.in or email us at trideep@synco.co.in
Trideep Raj Bhandari
Synco Industries Limtied
We provide all kinds of consumable spare parts for blasting machines, apart from providing safety wear for the same. For more details, please visit us at www.synco.co.in or email us at trideep@synco.co.in.
Trideep Raj Bhandari
Synco Industries Limited
Mastering the art of sand blasting, shot blasting, surface preparation, metal coating and paint spray equipment, this presentation tells you what we are all about.
For more details, visit us at www.synco.co.in or email us at trideep@synco.co.in.
Trideep Raj Bhandari
Synco Industries Limited
We at Synco manufacture blast rooms specially suited to the requirements of our clients.
For more details please visit us at www.synco.co.in or email us at trideep@synco.co.in.
Trideep Raj Bhandari
Synco Industries Limited
This presentation is illustrative of providing shot blasting or peening machines for manufacturers of automotive parts.
For more details, please visit us at www.synco.co.in or email us at trideep@synco.co.in
Trideep Raj Bhandari
Synco Industries Limited
Synco Industries Ltd. is an automotive industry company located in Jodhpur, India that manufactures suction blasting machines. The suction blasting machines are suitable for cleaning mild corrosion or scale and can provide a fine matte finish. The machines have variable pressure between 4-6 Kgf/sq.cm for easy cleaning of soft metal surfaces. Synco sold 33 machines in the past year and achieved 100% results. They also offer custom machines, spare parts, and abrasive materials.
1. SyncoLite™ Glass Beads For Blast Cleaning
SyncoLite™ Glass Beads are an established blasting media for air assisted blasting applications using
pressure, induction suction and wet blasting principles. It is used for cleaning, conditioning or peening.
SyncoLite™ is manufactured from high-grade crushed and sized glass cullet, which is melted to a
spherical shape and annealed for uniform and controlled internal stresses and superior fracture
resistance.
These non abrasive transparent spheres function without any damage to the surface of the object or its
dimensions, embedment, contamination or pick-up. Based on the choice of size and operating
parameters, SyncoLite™ achievement of desired surface finish and texture from fine matte to bright
satin. By using masking stencils and blasting exposed surfaces with SyncoLite™ one can give special
effects or create decorative designs. Critically toleranced objects, dies, moulds, component etc. can be
cleaned, deburred, textured without removal of any base metal using SyncoLite™ which ensures the
sanctity of the critical tolerances, due to its intrinsic quality. The inherent strength of SyncoLite™ allows
it to survive multiple impacts, making it highly suitable for use in closed cycle blasting equipments with
recycling facilities. Being chemically inert, and non-toxic, SyncoLite™ does not leave any unwanted or
ferrous residues on blasted surfaces. Spent SyncoLite™ which is not contaminated is environmentally
harmless.
For More Details Contact Us At
SYNCO INDUSTRIES LIMITED
16-A (III), Heavy Industrial Area,
Jodhpur - 342 005
Cell: +91 - 9214407021
Tel: +91 - 291 - 2741571/671
Fax: +91 - 291 - 2742557
Email: mail@synco.co.in
Web: www.synco.co.in