This document provides an introduction to using SalesLogix, a customer relationship management software. It describes key features such as managing contacts, accounts, opportunities and tickets; using a calendar and activities; searching and reporting; communicating with customers; and accessing the software both onsite and remotely. The guide uses scenarios to demonstrate common tasks in SalesLogix such as adding contacts and accounts, scheduling activities, managing opportunities, and working with customer service tickets. It is intended to help users begin using the core functionality of the software.

1. Getting Started with SalesLogix
Version 6.2
Developed by SalesLogix Technical Publications

2. Getting Started with SalesLogix
Documentation This documentation was developed by SalesLogix Technical Publications. For content revisions, questions, or
comments, contact the SalesLogix writers at techpubs@saleslogix.com.
Comments
Copyright Copyright © 1997-2004, Best Software, Inc.
All rights reserved. This product and related documentation are protected by copyright and are distributed under
licenses restricting their use, copying, distribution, and decompilation. No part of this product or related
documentation may be reproduced in any form by any means without prior written authorization of Best Software
and its licensors, if any.
Version Version 6.2 (64)
July 5, 2004
Printed in the United States of America.
Trademarks SalesLogix is a registered trademark of Best Software, Inc.
Other product names may be trademarks or registered trademarks of their respective companies and are hereby
acknowledged.
Disclaimer Best Software has thoroughly reviewed this manual. All statements, technical information, and recommendations in
this manual and in any guides or related documents are believed reliable, but the accuracy and completeness
thereof are not guaranteed or warranted, and they are not intended to be, nor should they be understood to be,
representations or warranties concerning the products described. Best Software assumes no responsibility or
liability for errors or inaccuracies with respect to this publication or usage of information. Further, Best Software
reserves the right to make changes to the information described in this manual at any time without notice and
without obligation to notify any person of such changes
Technical Technical Support is available to customers with support contracts directly from Best Software and to Certified
Business Partners. Calls are answered during business hours, Monday through Friday, excluding holidays. Current
Support contact information is available on the SalesLogix Web site. Customers with a valid technical support contract and
a Web access code can request technical support electronically on the SalesLogix SupportOnline Web site.
SalesLogix Web site www.saleslogix.com
SalesLogix SupportOnline Web site http://support.saleslogix.com
Revisions to this book are posted on the SalesLogix SupportOnline Web site. Check this site regularly for current
SalesLogix product documentation.

3. Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Why Use SalesLogix? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
About This Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Chapter 1 Understanding the SalesLogix Workspace . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Logging on to SalesLogix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Working in SalesLogix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Understanding the Workspace Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Using Detail Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Using List Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Using Split Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Navigating in SalesLogix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Working in SalesLogix Over the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Understanding the Workspace Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Using Detail Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Using List Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Navigating in SalesLogix Over the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Chapter 2 Managing Contacts and Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Adding a Contact and Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Understanding Account Ownership . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Adding an Account Association . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Requesting Literature for a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Scheduling a Follow-up Activity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Adding a Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Chapter 3 Managing Your Sales Activities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Completing an Unscheduled Activity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Inviting Others to a Meeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Using the Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Using the Activities View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Working with the Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

4. Using the Reports View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Viewing a History of Interactions with an Account . . . . . . . . . . . . . . . . . . . . . .29
Chapter 4 Communicating with Contacts and Accounts. . . . . . . . . . . . . . . . . . . . . . . . . .31
Working with Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Creating a New Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Using Mail Merge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Working with Outlook E-Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Chapter 5 Managing Opportunities for Sales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Adding an Opportunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Using Opportunity Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Closing an Opportunity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Chapter 6 Working with Customer Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Adding a Ticket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Punching In and Out of a Ticket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Closing a Ticket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Chapter 7 Using SalesLogix Away from the Office . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Understanding Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Synchronizing with the Main Office Database . . . . . . . . . . . . . . . . . . . . . . . . . .45
Reviewing Synchronization Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Understanding Conflict Resolution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Understanding Subscription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

5. Introduction
SalesLogix® is the customer relationship management (CRM) solution that drives sales
performance in small to mid-sized businesses through Sales, Marketing, and Customer
Support automation and integration to accounting and business management applications.
Why Use SalesLogix?
SalesLogix helps you manage all aspects of the sales cycle and customer relationship. You
can be more productive when you use SalesLogix to track contacts, accounts,
opportunities, and activities. In addition, SalesLogix provides tools for reporting, working off-
site, responding to voice and e-mail messages, and much more.
Key Features
The following key features describe how you can use SalesLogix during a sales cycle:
Contact, Account, Opportunity, and Ticket Views Use the Contact, Account,
Opportunity, and Ticket views to manage detailed information about your contacts,
accounts, opportunities, and tickets.
Calendar and Activities Use the Calendar to view open and completed activities and
events. Use the Activities view to manage your daily activities such as scheduling phone
calls, meetings, and events.
Lookups Use lookups to search for records, build groups, or create custom reports.
Lookups can be simple (search for an account name) or complex (search for all accounts in
New York with revenue over $500,000).
Groups Use groups to organize your contacts, accounts, opportunities, and tickets based
on common characteristics. Groups can be used for reporting, mail merges, and more.
Mail Merge Use Mail Merge when you need to communicate with a group of contacts,
accounts, or opportunities.
Reports Use reports to produce sales information about your contacts, accounts,
opportunities, and tickets. You can use filters to customize report information.
Literature Requests Use literature requests to send marketing material or other
documents to contacts. Literature requests are generally paper materials that must be
mailed.
Library Use the Library as a central repository for your company information. The Library
often contains items such as product information, sales literature, and presentations.
Advanced Outlook Integration Use Advanced Outlook Integration to access Outlook’s
calendar when sending e-mail, scheduling activities, and managing contacts. This feature
must be enabled by your system administrator.
Onsite and Remote Access Use SalesLogix in your office or from a remote location.
1

6. About This Guide
The purpose of this guide is to help you begin using SalesLogix. This guide uses scenarios
to demonstrate how to use SalesLogix for many of your daily tasks.
You can access SalesLogix on a network (while in the office), over the Web, and remotely
(from a laptop). The procedures described in each chapter are the same when you are using
SalesLogix in the office or working remotely. When necessary, different steps are provided
when you are accessing SalesLogix over the Web.
If your company has customized SalesLogix, the number, order, and appearance of dialog
boxes and screens may be different than described. See your system administrator for more
information.
The Help symbol precedes online Help topic names where you can find additional
information.
Related Documentation
In addition to this guide, SalesLogix offers the following documentation.
• SalesLogix Quick Reference card provides commonly used shortcut keys, e-mail
configuration options, and tips for working with groups and Advanced Outlook
Integration. The SalesLogix Quick Reference card is accessable from the Start menu.
Click Start, point to Programs, point to SalesLogix, point to Documentation, and then
click SalesLogix Quick Reference.
Additional resources and documentation are available on the SalesLogix SupportOnline
Web site at http://support.saleslogix.com, and Help is available in each SalesLogix
application.
2 Getting Started with SalesLogix Sales v6.2

7. Chapter 1
Understanding the SalesLogix Workspace
Take a few minutes to learn some of the SalesLogix basics. It will help you become familiar
with the workspace and navigation features.
In this chapter, you will learn to:
• Log on to SalesLogix.
• Understand the SalesLogix workspace.
• Get more help.
Logging on to SalesLogix
Before you begin, locate your User Identification code (User ID) and password. If you do not
have this information, contact your system administrator.
If a database connection was not configured during your SalesLogix installation, you must create
a new connection. See the “Log on to SalesLogix” Help topic and click the Data Link Manager
link for detailed instructions.
To log on to SalesLogix
1 Click Start, point to Programs, point to SalesLogix, and then click SalesLogix Client.
Your system administrator may have set SalesLogix to open automatically based on
your Windows login. If this option is set, the following steps do not apply.
2 Type your Username and Password.
Passwords are case-sensitive. In addition, your system administrator may set
restrictions on using blank passwords, your user name as a password, and other
options. If necessary, see your system administrator to discuss your password options.
3 In the Log on to box, select the database you want to use from the list.
Your company may have more than one database. Be sure to select the correct
database for the work you intend to do.
4 Click OK.
3

8. The Activity Manager appears when you have overdue activities, or if you need to
confirm any activities. Click OK to close the Activity Manager.
To log on to SalesLogix over the Web
1 Open your browser and in the Address field, type the address of the SalesLogix Web
Client.
Your system administrator will provide the address for SalesLogix
2 Type your User Name and Password.
3 Click Log On.
The Activity Manager appears when you have overdue activities, or if you need to
confirm any activities. Click OK to close the Activity Manager.
The following sections describe how to work in SalesLogix.
4 Getting Started with SalesLogix Sales v6.2

9. Working in SalesLogix
The workspace is the area where various views appear in the main SalesLogix window. The
view is the active feature.
Title Bar Menu Bar Standard Toolbar Group Button
Quick
Find
Standard
Navigation
Bar
Tabs
Status Bar
Figure 1 Account Detail view
Understanding the Workspace Features
Each view in SalesLogix contains many of the following features. Your workspace may be
different depending on your access rights or if your system administrator has customized
SalesLogix.
Feature Description
Title Bar The Title Bar identifies the active view. When you are in the Account, Contact,
Opportunity, or Ticket Detail views, it also displays the name of the current
account, contact, opportunity, or ticket.
Menu Bar The Menu Bar contains SalesLogix menu items. Each menu item contains a
shortcut key, which is the underlined letter in the item name. For example, to
insert a new contact or account, you can open the Insert menu, then press
C. Shortcut keys also appear to the right of some menu items; you can press
these keys to activate the feature. For example, to schedule a phone call,
press SHIFT + F3.
Note Press the ALT key to display the shortcut keys on each menu.
Standard Toolbar The Standard Toolbar (also called the Toolbar) contains buttons that you click
to open the most frequently-used SalesLogix commands. To move the
toolbar, drag it to another part of the window. From the View menu, you can
show or hide toolbars.
Understanding the SalesLogix Workspace 5

10. Feature Description
Group Button The Group button, located in the upper right corner of the view, displays a
tree view of all groups. You can double-click a group in the tree view to open
that group.
Quick Find The Quick Find button, located in the upper left corner of the view, can be
used to search for a particular contact, account, opportunity, or ticket.
Standard Navigation Bar Located on the left side of the SalesLogix workspace, the Navigation Bar
(also called the Standard NavBar) contains buttons that open the main
SalesLogix views. Click the up or down arrow at the top and bottom of the
Navigation Bar to scroll up or down.
Tabs Tabs organize information on many SalesLogix views and dialog boxes.
Status Bar The Status bar displays the current date, user, database, and status icons,
such as whether or not you are logged on to e-mail. Right-click an icon to
open a shortcut menu. You can show or hide the status bar by opening the
View menu and clicking Status Bar.
Using Detail Views
The Contact, Account, Opportunity, and Ticket Detail views contain in-depth information
about one item at a time. The Detail view has three main sections:
• The top section shows basic information about the selected contact, account,
opportunity, or ticket. When you add a new contact, account, opportunity, or ticket,
dialog boxes guide you to enter the information that appears in the Detail view. To edit
information, click the box you want to change.
• The middle section is called the user-defined area. This area serves as an open view of
the tab you use most often. Click a tab in the bottom section, hold the mouse button and
drag the tab to this area. The tab will remain open in the user-defined area each time
you use SalesLogix. If you want to change the tab in this area, select another tab and
drag it to replace the current tab.
• The bottom section contains a group of tabs. Each tab shows specific information you
need for the related contact, account, opportunity, or ticket. Your system administrator
can create custom tabs for your company.
Using List Views
List views display contacts, accounts, opportunities, or tickets in a list with columns and rows
of information. Each tab in the list view contains a group of contacts, accounts, opportunities,
or tickets.
• You can customize the List view by sorting information in the columns, rearranging the
order of columns, and adjusting column widths.
For more information, see the “Columns” topic in Help.
6 Getting Started with SalesLogix Sales v6.2

11. • You can right-click in a List view to open the shortcut menu for options such as adding
and deleting group members
Figure 2 Account List view
Using Split Views
Split views display information from both the Detail view and the List view. If you often switch
between accounts, use the Split view to manage your information. Using the Split view, you
can click the account in the List view section of the screen and display its detail information
in the other section of the screen.
Figure 3 Account Split view
Understanding the SalesLogix Workspace 7

12. Navigating in SalesLogix
The following features help you work in SalesLogix.
Feature Description
NavBar Buttons Use the buttons on the Navigation Bar to switch between views of the same
type. For example, if the Contact List view is active, and you click the
Accounts button, the Account List view opens.
Navigation Buttons Click the Left or Right arrows to move to the first, next, previous, or last record
in the group.
For example, if the Account Detail view is active, click the Right arrow to move
to the next account in the group.
Quick Find Use the Quick Find button to search for accounts, contacts, opportunities, or
tickets.
To use Quick Find, click the button in the top left of the view. Type your search
criteria and then click the Find (magnifying glass) button.
Pick Lists A pick list is a set of values you can select from when entering data. Pick lists
are useful because they encourage consistent data entry. Your access rights
determine if you can add, edit, or delete pick list items.
To open a pick list, click the Ellipses button in the box. You may need to click
once in the box before the Ellipses button appears.
Shortcut Menus Right-click in many SalesLogix views to get a menu of features available for
that area.
Lookup Label Detail views contain pre-defined (label) lookups. When you rest your mouse
pointer on a label, it becomes a button that you can click to perform a lookup.
For example, to search for an account, click the Account lookup label and
type your search criteria in the Lookup Account dialog box.
Previous/Next Buttons Use the Previous and Next buttons to view the previous or next contact,
account, opportunity, or ticket. These buttons become active when you have
viewed more than one contact, account, opportunity, or ticket during a single
SalesLogix session.
Ctrl + F8 Use Ctrl + F8 to toggle the Split view open or closed.
Shift + F9 Use Shift + F9 to insert a Name/Date/Time stamp in a text box.
8 Getting Started with SalesLogix Sales v6.2

13. Working in SalesLogix Over the Web
Using SalesLogix over the Web allows you to access SalesLogix away from the office,
provided you have Web access and a compatible browser. Access to information over the
Web uses the same security as SalesLogix on a network.
Menu Bar List View button Status Bar
Title Bar
Standard
Navigation Bar
Tabs
Figure 4 Account Detail view in SalesLogix over the Web
Understanding the Workspace Features
Each view in SalesLogix contains many of the following features. Your workspace may be
different depending on your access rights or if your system administrator has customized
SalesLogix.
Feature Description
Title Bar The Title Bar identifies the active view. When you are in the Account, Contact,
Opportunity, or Ticket Detail views, it also displays the name of the current
account, contact, opportunity, or ticket.
Menu Bar The Menu Bar contains SalesLogix menu items (located in the New,
Schedule, and Write buttons). Click the menu button to access menu items.
List View button The List View button appears on the Contact, Account, Opportunity, and
Ticket Detail views. Click the List View button to open the List view
corresponding to the active Detail view. For example, if you are working in the
Account Detail view, clicking the List View button opens the Account List
view.
Status Bar The Status bar is located at the top of the view and displays the current date
and user.
Standard Navigation Bar Located on the left side of the SalesLogix workspace, the Navigation Bar
(also called the Standard NavBar) contains buttons that open the main
SalesLogix views.
Tabs Tabs organize information on many SalesLogix views and dialog boxes.
Understanding the SalesLogix Workspace 9

14. Using Detail Views
The Contact, Account, Opportunity, and Ticket Detail views contain in-depth information
about one item at a time. The Web Detail view has two main sections.
• The top section shows basic information about the selected contact, account
opportunity, or ticket. When you add a new contact, account, opportunity, or ticket dialog
boxes guide you to enter the information that appears in the Detail view. To edit
information, click the box you want to change, make edits, and then click the Update
button to save the changes.
• The bottom section contains a group of tabs. Each tab shows specific information you
need for the related contact, account, opportunity, or ticket. Your system administrator
can create custom tabs for your company.
Using List Views
List views display contacts, accounts, opportunities, or tickets in a list with columns and rows
of information. Each tab in the list view contains a group of contacts, accounts, opportunities,
or tickets.
• You can customize the List view by sorting information in the columns, rearranging the
order of columns, and adjusting column widths.
• You can click the Group Options button in the Menu bar to access menu options for
adding and deleting group members.
Figure 5 Account List view using SalesLogix over the Web
Navigating in SalesLogix Over the Web
The following features help you work in SalesLogix over the Web.
Feature Description
Group Options Menu The Group Options menu appears when a List view is active. Use the menu
options to modify the active group.
Find Button Click the Find button (magnifying glass) to search for information.
10 Getting Started with SalesLogix Sales v6.2

15. Feature Description
Update Button or You must click the Update button to commit your changes. When using a wizard,
Complete Button use the Complete button to commit changes.
Reset Button Use the Reset button to clear any changes you have made since the last
Update. For example, if you add a Toll Free number and click Reset, the number
is cleared. If you add a Toll Free number, then click Update, then click Reset, no
information is cleared from the form.
Delete Button Use the Delete button to remove the selected record.
Add Button Use the Add button to add an item specific to the active view. For example, when
the Account Detail view, Activities tab is active, you can click the Add button to
schedule a new activity.
First, Last, Previous, Use the First, Last, Previous, and Next buttons to move between contacts,
Next accounts, opportunities, and tickets in a Detail view.
Getting Help
For information on advanced features and areas not covered in this guide, use the following
SalesLogix Client online Help topics.
To access online Help, use the Help menu, click the Help button on the Toolbar, or press [F1]
to view context-sensitive help. To access Help over the Web, click the Help button. A Help
topic for that screen appears. To look for a particular Help topic, click the Search Help button
in the title of any Help topic.
What do you want to do? Topic Name
Find out what new features have been added to What’s New in This Release
SalesLogix.
Connect to another database. Log on to SalesLogix
Customize SalesLogix settings for my personal needs. • Setting User Preferences
• Set User Options - SalesLogix over the Web
Use the Activity Manager Activity Manager
Schedule an Event (such as a trade show). • Schedule/Edit an Event
• Schedule an Event -SalesLogix over the Web
Schedule a Meeting and Invite Others. • Schedule/Edit an Activity
• Schedule a Meeting -SalesLogix over the Web
Use the SalesLogix Query Builder to filter reports. • Example:Using Query Builder to Filter a
Report (SalesLogix/Support/Web)
In addition to the Help, you can find more information from the following sources:
Technical Support To access the SalesLogix Support Online Web site, click
SupportOnline on the Help menu. The site requires a designated caller with a current
support contract.
Understanding the SalesLogix Workspace 11

16. Sales Support Located in the Help menu is the link to the SalesLogix Web site
(www.saleslogix.com).
System Administrator See your system administrator for answers specific to your
SalesLogix installation.
Training SalesLogix offers training programs designed to meet your needs - online tutorials,
Webinars, onsite sessions, and Web conferences.
12 Getting Started with SalesLogix Sales v6.2

17. Chapter 2
Managing Contacts and Accounts
This chapter introduces you to the core of Customer Relationship Management (CRM) -
working with contacts and accounts.
• Contacts are the key people associated with an account.
• Accounts are your prospects and customers. Accounts can contain one or many
contacts.
You can use SalesLogix to manage contact and account information. This includes daily
interactions, such as phone calls, meetings, action items, or other correspondence.
In this chapter, you will learn to:
• Add a contact and an account.
• Create an account association.
• Schedule a literature request.
• Add a note and schedule a follow-up activity.
Adding a Contact and Account
SalesLogix focuses on account relationships. Therefore, all contacts must, in some way, be
attached to an account. Account and contact information is accessible by any SalesLogix
user who has the appropriate security. For example, you can create an account for Beacon
Motors. Your Sales Assistant may not have the correct security to access the account, but
your Sales Manager can.
You cannot create personal accounts or contacts in SalesLogix unless your system
administrator enables this option for your company. Personal contacts would include people
such as your spouse or dentist.
Understanding Account Ownership
Before creating an account in SalesLogix, it is important to understand account ownership.
• The Account Owner has access to an account and can use any account-related
activities such as scheduling activities, running reports, and so on. An account owner
can be an individual user, a team, or all SalesLogix users.
Access to account data can be different for each user. For example, if a team owns an
account, some team members may have read-only access to the account, while others
have read/write access. Security is controlled by your system administrator.
• The Account Manager is responsible for managing the relationship with the account.
This includes follow-up phone calls, meetings, preparing presentations and proposals,
working with the account’s contacts, and so on. An account manager can be an
individual user, a member of a team, or all SalesLogix users.
13

18. If an individual user is the account owner, the same user is generally set as the account
manager. However, if a team is the account owner, a team member will usually be set as the
account manager. Account owners and managers should be assigned according to your
company’s guidelines.
Our scenario:
You met Tom Dale and Joan Smith at a trade show. Tom and Joan (contacts) work for Beacon Motors
(account) in Dallas, Texas. First you will add contact Tom Dale to a new account (Beacon Motors); then
you will add Joan Smith to an existing account (Beacon Motors).
There are several ways to add contacts and accounts to SalesLogix. This guide will detail
the most common methods.
To add contacts and an account
1 On the Toolbar, click Insert Contact/Account.
2 In the Add Contact/Account Information dialog box, select New Contact and New
Account, and then click Next.
3 In the Contact box, type Tom Dale.
To add hyphenated last names or names with a professional designation, click the
Ellipses button in the Contact box. Then, use the Enter Name dialog box to specify a
name prefix (such as Dr.), first name, middle name, last name, or suffix (such as C.P.A).
4 In the Account box, type Beacon Motors.
5 In the E-mail and Web boxes, add e-mail and Web address information as necessary.
6 In the Phone box, type a phone number for the account.
7 Click the Look for Matching Records button.
This automatically searches the database for records that have the same e-mail
address, Web address, phone number, and account. If you do not check for existing
information, you might create a duplicate contact or account. Duplicates create
confusion and potentially damage customer relationships.
8 In the Title box, click the Ellipses button, select VP Sales, and then click OK.
9 Double-click the Address box, and then type Tom’s business address.
The Add Address dialog box appears when you type or double-click in the Address box.
10 Continue to add Tom’s information in the Contact Information section.
11 Under Account Information, add the Address, phone (Main), Fax, and other
information for Beacon Motors.
12 In the Acct. Mgr. box, click the Find button, and then double-click the account manager.
13 In the Owner box, click the Find button, and then double-click an owner.
14 Getting Started with SalesLogix Sales v6.2

19. 14 Type any remaining account information and confirm that the contact information you
entered is correct.
15 Click Save & New.
This option allows you to add another contact to the existing account.
16 In the Contact box, type Joan Smith.
17 Edit the E-mail, Phone, and other contact information as appropriate.
18 Click OK.
Figure 6 Contact Detail view with Tom Dale’s information
Managing Contacts and Accounts 15

20. To add contacts and an account using SalesLogix over the Web
1 On the Toolbar, click New, and then click Contact or Account.
2 In Step 1, select New Contact for New Account, and then click Continue.
3 In the Contact/Account Information area of Step 2, type Tom Dale in the Contact
boxes.
4 In the Account box, type Beacon Motors.
5 In the E-mail and Web boxes, add e-mail and Web address information as necessary.
6 In the Phone box, type a phone number for the account.
7 Click the Look for Matching Records button.
This automatically searches the database for records that have the same e-mail
address, Web address, phone number, and account. It is important to search for records
before adding information. If you do not check for existing information, you might create
a duplicate contact or account. Duplicates create confusion and potentially damage
customer relationships.
8 In the Title box, click the drop-down button and select VP Sales.
9 In the Address, City/State, and Postal/Country boxes, type Tom’s business address.
10 Continue to add Tom’s information in the appropriate boxes.
11 Under Account Information, add the Address, phone (Main), Fax and other
information for Beacon Motors.
12 In the Acct. Mgr. box, click the drop-down button, and then select the account manager.
13 In the Owner box, click the drop-down button, and then select an owner.
14 Type any remaining account information and confirm that the contact information you
entered is correct.
15 Click Save & New.
This option allows you to add another contact to the existing account.
16 In the Contact box, type Joan Smith.
17 Edit the E-mail, Phone, and other contact information as appropriate.
18 Click Complete.
Figure 7 Contact Detail view with Tom Dale’s information in SalesLogix over the Web
If you need to edit a contact or account’s information, click a box on the Detail view and add
the changes. When using SalesLogix over the Web, you must click the Update button after
making any changes.
16 Getting Started with SalesLogix Sales v6.2

21. Adding an Account Association
Accounts may have a common connection, for example, one company may be a parent of
another. You can create a relationship between accounts by adding an association. This
association can be helpful for tasks like running reports. You can create one report for both
accounts rather than two separate reports. Associations can also create opportunities for
you to sell to parent companies rather than subsidiaries.
Our scenario:
Tom Dale told you that Beacon Motors was owned by Abbot Manufacturing. You want to create a
parent/subsidiary relationship between the two accounts.
To add an account association
1 In the Beacon Motors Account Detail view, click the Associations tab.
If an account is open in the Detail view before adding an association, the account
information is automatically added in various fields.
2 Right-click in the grid and click Associate an Account.
3 In the Account box, type abbott, and then click the Find button.
4 Double-click Abbott WorldWide in the Account list.
The Associate an Account dialog box appears.
5 Under Beacon Motors, Inc. is a, click the Ellipses button, select Subsidiary, and then
click OK.
6 Under Abbott WorldWide is a, click the Ellipses button, and then double-click Parent.
7 In the Description boxes, type a description for each account.
The description appears in the Description column on the Associations tab.
8 Click OK.
To add an account association using SalesLogix over the Web
1 In the Beacon Motors Account Detail view, click the Associations tab.
If the Associations tab is not visible, click More Tabs and select Associations from the
list.
2 Click the Associate Account button.
3 In the starting with box, type Abbott Manufacturing, and then click the Find button.
4 Click Abbott WorldWide in the account list.
5 In the Associate Accounts view, under Beacon Motors, Inc. is a/an, select
Subsidiary.
6 In the Abbott WorldWide is a/an box, select Parent.
7 In the Description boxes, type a description for each account.
The description appears in the Description column on the Associations tab.
8 Click Complete.
Managing Contacts and Accounts 17

22. Requesting Literature for a Contact
Literature requests involve sending marketing materials or other company documents to one
or more contacts. SalesLogix users or the system administrator manage the available
literature. After you schedule a request, the person or group at your company responsible
for literature fulfillment can complete the order.
Our scenario:
Joan Smith requested information on a specific product at a trade show, but you had run out of brochures.
You want to schedule a literature request to send the information to Joan.
To schedule a literature request
1 Open Joan Smith’s Contact Detail view.
2 On the Schedule menu, click Literature Request.
3 In the Literature Request dialog box, in the Description box, type a description of the
request.
4 Select the Send by date.
5 Select a Send via shipping method and Priority.
6 If you check the Handle fulfillment locally box, the literature request will be sent to your
default printer.
7 In the Cover box, click the folder, then choose the appropriate cover letter or memo from
the list as your cover letter.
8 In the Request for area, make sure the option of Current Contact (Smith, Joan) is
selected.
9 In the Print literature list area, specify how you want the literature list to be printed for
the package.
10 In the Available Literature area, double-click an item from the list to set the quantity.
You can set different quantities for multiple items. The items are included in the literature
list and printed as selected in Step 9.
11 Click OK.
To schedule a literature request using SalesLogix over the Web
1 Open Joan Smith’s Contact Detail view.
2 On the Schedule menu, click Literature Request.
3 In the Schedule Literature Request view, type a Description for the request.
4 Type or select the Send by date.
5 Select the Send via (delivery method) and the Priority of the request.
6 In the Print Literature List section, select with cover letter.
7 Click Continue.
8 In the Select a Template dialog box, expand Public Templates, expand Letter, select
Here is the Information you Requested, and then click OK.
9 In the Available Literature view, type the number of each item you want to send.
10 Click Complete.
18 Getting Started with SalesLogix Sales v6.2

23. The scheduled literature request appears on the Literature Requests tab in the contact’s
Detail view. The same information is available on the account’s Detail view Literature
Requests tab. This tab contains all literature requests for the account. When the literature
request is fulfilled, the information about the fulfilled request appears on the contact and
account’s Notes/History tab.
Scheduling a Follow-up Activity
In SalesLogix, phone calls, meetings, to-dos, and personal appointments are called
activities. Scheduling follow-up activities can help you organize and remember important
events.
Our scenario:
You want to schedule a phone call to follow-up on literature that was sent to Joan Smith.
To schedule a phone call
1 Open Joan Smith’s Contact Detail view.
2 On the Toolbar, click Schedule Phone Call.
3 In the Choose Activity Date dialog box, double-click the date you want to schedule the
phone call.
4 In the Phone Call Regarding dialog box, select an item from the list, and then click OK.
5 On the General tab, in the Time box, click the clock button, click and drag the time line
to select the time you want to schedule the phone call, and then click OK.
6 Verify the Contact and Account boxes contain the correct information.
If the information is incorrect, click the Find button to change the contact or account.
7 Select Set Alarm, and then select how much Lead time you would like.
When you set an alarm, SalesLogix notifies you before the phone call is scheduled.
Lead time determines how far in advance the alarm appears.
8 Complete the remaining information as necessary.
9 If your company uses Advanced Outlook Integration, you can click the Invite Contact
button and send an e-mail to Joan Smith notifying her of your scheduled telephone call.
10 Click OK.
To schedule a phone call using SalesLogix over the Web
1 Open Joan Smith’s Contact Detail view.
2 On the Schedule menu, click Phone Call.
3 Verify the Contact and Account boxes contain the correct information.
If the information is incorrect, click the Find button to change the contact or account.
4 In the Regarding box, select Confirm literature received.
5 In the Date box, type or select the date you want to schedule the phone call.
6 In the Start Time and End Time boxes, specify the time you want to schedule the
phone call.
Managing Contacts and Accounts 19

24. 7 Select Set Alarm for, and then select how much lead time you would like.
When you set an alarm, SalesLogix notifies you before the phone call is scheduled.
Lead time determines how far in advance the alarm appears.
8 Complete the remaining information as necessary.
9 Click OK.
You can view the scheduled phone call in the Contact and Account Detail views (on the
Activities tab), in the Activities view (on the All Open and Calls tabs), and in the Calendar
view. If your company uses Advanced Outlook Integration, the activity is scheduled in your
Outlook calendar.
Adding a Note
You can use notes to document the outcome of an activity, write your thoughts and
strategies, and to record interactions with a contact, account, or opportunity.
Note If you create a note for an opportunity, and then disassociate the note from the
contact and account, the note will not be sent to remote users.
Our scenario:
You found Tom Dale’s business card while cleaning out your briefcase. You had a note on the back
indicating Tom was interested in a support contract for any products his company purchased. You want to
add this information to SalesLogix.
To add a note
1 Open Tom Dale’s Contact Detail view.
2 On the Toolbar, click Insert Note.
3 In the Create Note dialog box, the current date appears in the Scheduled and
Completed boxes.
4 If necessary, clear the Timeless check box and record the time you created the note.
Note You can use the Create Note dialog box to schedule a follow-up activity. We will
discuss this process in the following chapter.
5 In the Regarding and Category boxes, use the Ellipses button to select an item from
the pick list.
6 In the Notes box, type information about the support contract Tom wants to purchase.
For example, you could add where the conversation took place, details about the
products Tom needs support for, and any other important information.
7 Click OK.
To add a note using SalesLogix over the Web
1 Open Tom Dale’s Contact Detail view.
2 On the New menu, click Note.
20 Getting Started with SalesLogix Sales v6.2

25. 3 In the Create A Note view:
• Verify Tom Dale’s name appears for the contact and Beacon Motors for the account.
• If necessary, change the date and time in the Date and Time boxes.
By default, the current date and time displays.
• In the Regarding and Category boxes, use the drop-down button to select an item
from the list.
4 In the Notes box, type information about the support contract Tom wants to purchase.
For example, you could add where the conversation took place, details about the
products Tom needs support for, and any other important information.
5 Click Complete.
You can view notes on the Notes tab of the Contact, Account, and Opportunity Detail views.
In addition, when using SalesLogix on a network, the Notes/History tab allows you to view
and filter notes and other history items.
Managing Contacts and Accounts 21

27. Chapter 3
Managing Your Sales Activities
SalesLogix can help you manage your daily activities, whether they are scheduled or
unscheduled. Scheduled activities include phone calls, meetings, to-dos, and
appointments. Unscheduled activities, such as returning a phone call or answering e-mail,
may occur several times a day.
In this chapter, you will learn to:
• Complete an unscheduled activity and schedule a meeting.
• Use the Calendar and Activities views.
• Use the Library.
• Run a report.
• View the history of an account.
Completing an Unscheduled Activity
Unscheduled activities can occur unexpectedly throughout the day. It is a good idea to keep
SalesLogix open at all times so you can quickly access contact and account information.
After you respond to an unscheduled activity, you should complete the activity in SalesLogix
to create a record of the interaction with the contact or account.
When you complete an activity, details about it are recorded on the Notes/History tab for the
related account, contact, or opportunity. These records ensure that the history of
interactions with the contact or account are kept up to date.
Our scenario:
You received an unexpected call from Tom Dale. You need to complete an activity for the unscheduled
phone call and schedule a follow-up meeting.
There are several ways to complete an activity in SalesLogix. The following method allows
you to complete the activity, schedule a follow-up meeting, and carry over the notes.
To complete an unscheduled activity
1 Open Tom Dale’s Contact Detail view.
2 On the Toolbar, click Complete an Activity.
3 In the Complete an Activity for (Contact Name) box, select Phone Call.
4 Click OK.
5 In the Complete Phone Call for (Contact Name) box, the Date Scheduled and
Completed should be the current date.
6 To enter a Time and Duration for the call, make sure Timeless is not selected, and
then in the Duration box, double-click to use the timeline to specify time and duration.
Click OK to close the timeline.
23

28. 7 In the Result box, select a result from the list.
8 To schedule the follow-up meeting, in the Schedule a Follow-up area, in the Type box,
select Meeting.
9 Select Carry Over Notes to add the notes for the phone call to the scheduled meeting
notes.
10 In the Regarding and Category boxes, select an item from the list.
11 In the Notes box, type any information regarding the phone call.
12 Click OK.
The Select Activity Start Date calendar appears for you to select the date for the follow-
up meeting.
13 Select a date for the meeting, and then click OK.
The Schedule Meeting box automatically opens for you to invite others to the meeting.
To complete an unscheduled activity using SalesLogix over the Web
1 Open Tom Dale’s Contact Detail view.
2 On the Schedule menu, click Complete an Activity.
3 Select Create a New Unscheduled Activity to Complete and Phone Call.
4 Click Continue.
5 In the Complete An Activity - Phone Call dialog box, the current date appears in the
Scheduled and Completed boxes.
You can type another date if needed. If Timeless is not selected, you can set the
scheduled and completed times for the call.
6 In the Schedule a Follow-up Type box, select Meeting.
7 Select Carry Over Notes to add the notes for the phone call to the scheduled meeting
notes.
8 In the Regarding, Category and Result boxes, select an item from the list.
9 In the Notes box, type any information regarding the phone call.
10 Click Complete.
The Schedule Meeting view automatically opens for you to invite others to the meeting.
Inviting Others to a Meeting
When you schedule a meeting or a phone call in SalesLogix, you can include other
SalesLogix users in the activity. These types of appointments appear on the Confirmations
tab in your Activities view. You can accept or decline activities listed on the Confirmations
tab.
Note If your company uses Advanced Outlook Integration, you can include non-
SalesLogix users in the activity. The Microsoft Outlook Attendee Availability tab
appears instead of the SalesLogix Available Members and Resources tabs.
Our scenario:
You want to invite Ed Martinez (from your company) to a meeting with Tom Dale and Joan Smith (contacts
for Beacon Motors).
24 Getting Started with SalesLogix Sales v6.2

29. To invite others to a meeting
1 On the Schedule menu, click Meeting.
2 In the Select Activity Start Date box, double-click the date you want to schedule the
meeting.
3 In the Meeting Regarding dialog box, select Presentation, and then click OK.
4 In the Time box, specify the time for the meeting
5 In the Alarm area, click to Set Alarm, and in the Lead box, assign a lead time for you
to be notified by the alarm.
6 In the Notes box, type any notes.
7 Click the Members tab to include Ed Martinez in the meeting.
If you are using Advanced Outlook Integration, click the Attendee Availability tab.
8 From the list of Available Members, select Ed Martinez, and then click Add.
- or -
If you are using Advanced Outlook Integration, click Invite Others and select Ed’s name
from the Outlook Address list.
9 Click OK.
To invite others to a meeting using SalesLogix over the Web
1 On the Schedule menu, click Meeting.
2 In the Schedule Meeting dialog box, verify your name is selected in the User box.
3 In the Start Time and End Time boxes, set a time for the meeting.
4 Click Members.
5 In the Available Members list, double-click Ed Martinez’s name.
6 Click OK.
7 Click OK in the Schedule Meeting dialog box.
When Ed Martinez opens SalesLogix, the Activity Manager will notify Ed that he needs to
confirm the activity. If Ed uses SalesLogix on a network with Advanced Outlook Integration,
he will receive an Outlook e-mail message asking him to accept or decline the meeting.
Using the Calendar
The SalesLogix Calendar displays both open and completed activities and events. If you
have the correct access rights, you can view the calendars and activities of other SalesLogix
users.
You can view schedules by the day, week, month, or year. When using SalesLogix over the
Web, you can view your schedule by the day, week, or month. Each scheduled activity has
a symbol before it to represent the type of activity such as phone call, meeting, to-do, or
personal appointment.
Our scenario:
You want to check your calendar to see if you have time available to meet with Ed Martinez before you
both meet with Tom Dale and Joan Smith.
Managing Your Sales Activities 25

30. To view the Calendar
1 On the Navigation Bar, click Calendar.
2 Click the Day, Week, Month, or Year tab.
• Day View - Displays a timeline for the day, a calendar displaying the current month
with the selected day, and timeless activities and events listed below the calendar
grid.
• Week View - Displays a grid with a column for each day in the selected week.
Scheduled activities display in the timeline, timeless activities display below the
timeline, and scheduled events display above the timeline.
• Month View - Displays a calendar and lists the scheduled activities and events for
the selected date.
• Year View - Displays a 12-month calendar with the current date displayed in red.
Days with scheduled activities are underlined. For any selected date, a list of
scheduled activities and events displays on the right of the view.
3 To customize the types of activities you see in the calendar, right-click the Activities grid,
and on the shortcut menu, point to Show, and then select the type of activity you want
to appear in the calendar.
To display more information, move the mouse over the activity.
4 If you have access to view another user’s calendar:
a Click the User button (your name) in the top right corner.
b In the Select Users to View dialog box, add or remove users as necessary.
c Click OK.
All users display in the calendar with color-coded activities and events.
5 Use the File menu, Print Calendar Reports option to print your calendar.
Note If your company uses Advanced Outlook Integration, you can view your Outlook
calendar in SalesLogix instead of the SalesLogix calendar. To select this option, on
the Tools menu, click Options, Calendar tab. In the Show this calendar area, select
Outlook.
To view the Calendar using SalesLogix over the Web
1 On the Navigation Bar, click Calendar.
2 Click the Day, Week, or Month link.
Each scheduled activity in the calendar is a link to the actual activity. Rest your mouse
over the activity to view its details. Click a link to open the selected activity.
• Day View - Displays a timeline for the day, a calendar displaying the current month
with the selected day, and timeless activities and events listed below the calendar
grid.
• Week View - Displays each day in the selected week that includes scheduled
activities. Timeless activities and events display below a calendar grid.
• Month View - Displays a calendar and lists the scheduled activities and events on
the selected day and in a list to the right of the calendar.
3 If you have access to view another user’s calendar, click the User button drop-down
arrow, and then select the user whose calendar you want to view.
26 Getting Started with SalesLogix Sales v6.2

31. Using the Activities View
Use the Activities view to manage your scheduled activities and events. If you have
additional access rights, you can also view other SalesLogix user’s activities.The Activities
view includes several tabs that group activities.
• (Using SalesLogix on a Network) Once you select a tab: right-click the grid, point to
Time Frame, and then select the timeframe for activities you want to view.
You can double-click an activity to see its detailed information.
• (Using SalesLogix over the Web) Once you select a tab: click the Time Frame drop-
down list, select the timeframe for actives you want to view, and then click the Find
button.
You can click the activity type to view its detailed information and make any required
changes.
Note The Activities view is the same when viewed on a network or over the Web. Any
differences are noted in the following table.
Tab Displays
All Open All your scheduled activities.
Calls Phone calls you have scheduled within the selected timeframe.
Meetings Meetings scheduled within the selected timeframe.
To-Dos To-do items scheduled within the selected timeframe.
Personal Personal activities scheduled within the selected timeframe.
Alarms Lists activities that have a pre-activity alarm set.
Note You can automatically set an alarm for any scheduled activity by selecting
Options on the Tools menu, clicking the Activities tab, and then setting Alarm
options. When using SalesLogix over the Web, click the Options link (in the upper
right-corner), click the Activity/Alarm tab, and set the Alarm options.
Events Events that you have scheduled within the selected timeframe.
Literature Scheduled literature requests.
Note A red box in the first column indicates the request was fulfilled. When using
SalesLogix over the Web, you will see the date the request was fulfilled.
Confirmation Meetings and phone calls that you have been invited to participate in. You can
accept or decline any activities listed here.
Working with the Library
The Library is a central repository for company information. Files are organized in folders.
Your company’s library may include product information, policies and procedures,
presentations, Web addresses, and so on.
Only the system administrator or users with administrative privileges can add documents to
the Library. If you are using SalesLogix on a network, you can access a file directly from the
Library without storing the file on your computer. When accessing SalesLogix over the Web,
you can request and then download a Library file. SalesLogix Remote users must request
Managing Your Sales Activities 27

32. files from the Library. When remote users synchronize, the request is sent to the server and
the requested file is delivered during the next synchronization.
Our scenario:
You want to use the Library to find current pricing information.
To access information from the Library
1 On the Navigation Bar, click Library.
2 In the Library list, click the folder that contains the file you want to open.
3 Double-click the file to open.
SalesLogix launches the related application and opens the file.
4 If necessary, print the file.
To access information from the Library using SalesLogix over the Web
1 On the Navigation Bar, click Library.
2 In the Library list:
• To view the document, click the name of the file.
• To save the document to your computer, right- click the name of the file, click Save
Target As, select the location where you want to save the file, and then click Save.
Using the Reports View
Reports enable you to view information about contacts, accounts, opportunities, tickets, and
other related data. You can use filters to limit the data included in the report.
For information on advanced filtering, see the Example: Using Query Builder to Filter a Report
topic in Help.
The Reports view contains a filter section and the available reports section. You can only
access reports that have been released to you by the system administrator. Reports can be
released to you personally, or to a team that you are a member of. When you view or print
any report, only records you have access to are included in the report.
Our scenario:
You want to run a report listing all the interactions you have had with Tom Dale.
To run a report
1 Open Tom Dale’s information in the Contact Detail view.
2 On the Navigation Bar, click Reports.
3 In the tree view listing of all available report types, click to expand the Contact list.
4 In the Contact list, select Contact Detail - Sample - Everyone.
5 In the Filter by Contact section, select Current Record.
6 Click Preview.
28 Getting Started with SalesLogix Sales v6.2

33. 7 In the Enter Parameter Values dialog box, leave the default of Yes for all fields.
The parameter values change with each report or report type.
8 Click OK.
The report’s first page appears in the SalesLogix Crystal Report Viewer. In the report
preview you can:
• Use the arrow buttons to move to the next, previous, first, and last pages.
• Use the tree view in the left pane to jump to see specific account information.
• Print the report.
• Export the report to PDF, Microsoft Word, and other file formats.
To run a report using SalesLogix over the Web
1 Open Tom Dale’s information in the Contact Detail view.
2 On the Navigation Bar, click Reports.
3 In the tree view listing of all available report types, click to expand the Contact list.
4 In the Contact list, select Contact Detail - Sample - Everyone.
5 In the Filter by Contact section, select Current Record.
6 Click Preview.
7 In the Enter Parameter Values dialog box, leave the default of Yes for all fields.
The parameter values change with each report or report type.
8 Click Accept.
The report’s first page appears in the SalesLogix Crystal Report Viewer. In the report
preview you can:
• Use the arrow buttons to move to the next, previous, first, and last pages.
• Export the report to PDF, Microsoft Word, and other file formats.
9 Click Accept.
Viewing a History of Interactions with an Account
When responding to scheduled or unscheduled activities, you may need to view the history
of interactions with the contact or account. For example, if a prospect calls to ask a question
she had from your last meeting, you can open the account history to view the meeting notes,
including a list of meeting participants. The Notes/History tab contains all interactions,
including full text notes, and provides filter options for viewing, e-mailing, and printing history
items and notes.
Our scenario:
You want to review all the interactions you have had with anyone at Beacon Motor’s.
To view account history
1 Go to Beacon Motors’ Account Detail view.
2 Click the Notes/History tab.
Managing Your Sales Activities 29

34. 3 If necessary, click the Filter Options button to expand the list of filters. You can show
or hide specific information based on the selected filters.
• My History - Filters history list to show all your history records.
• Within last days - Filters history list to show information for the last selected number
of days.
• User - Filters history list to show all history records of the selected user.
• Activity Type - Filters history list to show all histories of the selected type.
• Date Range From/To - Filters history list to show all histories in the selected time
frame.
• Show Database Changes - Filters history list to show/hide database changes.
• The Word and Email buttons copy the selected records into Microsoft Word and
Outlook respectively.
4 To edit or view the notes associated with a history item, click the Edit/View Notes link.
If you created the history item, you can edit it. If another user created the item, you can
only view the information.
To view account history using SalesLogix over the Web
1 Go to Beacon Motors’ Account Detail view.
2 Click the History tab.
If the History tab is not visible, click More Tabs and select History from the list of
available tabs.
3 If you want to view the full text notes for a history item, click the item link on the History
tab.
The detail view opens displaying the item’s information.
30 Getting Started with SalesLogix Sales v6.2

35. Chapter 4
Communicating with Contacts and Accounts
In addition to telephone calls and meetings, you may need to send additional information to
your contacts and accounts such as proposals, letters, or memos. Using SalesLogix, you
can create and edit templates, letters, and other business correspondence. You can then
use Mail Merge to merge your template to a contact, group of contacts, an account, or an
opportunity. Using Advanced Outlook Integration, you can share information between
Outlook and SalesLogix when you write e-mail messages, add contacts, and schedule
meetings.
In this chapter, you will learn to:
• Create a template.
• Use Mail Merge to send information to contacts.
• Work with Outlook e-mail.
Working with Templates
During the sales process you may often write letters, proposals, e-mails, or memos. Your
company may have standard templates to make these tasks easier. SalesLogix has two
types of templates:
• Public templates are created and distributed by your system administrator. Public
templates are usually available to all users. When you copy a public template and save
it to your computer, it becomes a private template.
• Private templates can be created by each SalesLogix user. When you create a private
template, only you have access to the template. You can share your private templates
with other SalesLogix users.
For more information on sharing templates with other users, see the “Managing and
Selecting Templates” topic in Help.
Creating a New Template
These instructions help you create a new private Microsoft Word template.
Our scenario:
Tom Dale requested a pricing proposal for 150 motors. You need to create a new pricing proposal template
that includes support contract information.
To create a new template
1 On the Write menu, click Templates.
2 In the Manage Templates dialog box, click New.
31

36. 3 In the Properties for: New Word Template dialog box,
a In the Template Type section, select E-mail.
b In the Name box, type Pricing Proposal.
c In the Family box, select E-mail.
d In the Owner box, your name should appear as the owner.
e Click OK.
Microsoft Word opens for you to create the new template.
4 In the empty document, type the text you want to include in the template.
5 To include SalesLogix merge fields, click the Insert SLX Field button, and then select
the field you want to insert.
If necessary, click More SLX Fields on the Insert SLX Field menu to see a complete
list of available merge fields.
6 Click Save and Close.
The Pricing Proposal appears in the Private Templates folder under the E-mail family.
7 In the Manage Templates dialog box, click Close.
Using Mail Merge
You can use mail merge when you want to correspond with a group of contacts, accounts,
or opportunities. Mail merge helps you simplify the process of sending the same information
to numerous people. When using mail merge, you can merge to a file, send an e-mail, send
a fax, or print the merged document.
Our scenario:
You need to send pricing information to all your contacts at Beacon Motors. You want to run a mail merge
to send all the information at once.
The following procedures detail how to send an e-mail using Mail Merge.
To send e-mail using Mail Merge
1 Open Tom Dale’s information in the Contact Detail view.
2 On the Write menu, select Mail Merge.
The Mail Merge dialog box appears.
3 In the Select a Template box, expand the Private Templates list, expand the E-mail
list, and then double-click the Pricing Proposal template.
4 In the Merge With area, select Current Contact.
5 In the Output To area, select E-mail.
6 In the From box, your e-mail address appears.
If necessary, click the Address Book to select another user as the sender.
7 (Optional) Click the Address Book in the CC and BCC boxes to select other recipients.
8 In the Subject box, type Pricing Proposal for 150 Motors.
9 In the Format box, the default format of your selected template is shown; select another
format if desired.
32 Getting Started with SalesLogix Sales v6.2

37. 10 Click the History Options tab.
11 In the Category box, select Info Requested.
12 Click Merge.
Working with Outlook E-Mail
If your company uses Advanced Outlook Integration, you can exchange e-mail messages,
contacts, and calendar information between Microsoft Outlook and SalesLogix. For
example, you can:
• Create an e-mail message in Outlook, select contacts from your SalesLogix address
book, and record the body of the e-mail message to each contact’s notes/history in
SalesLogix.
When you select a SalesLogix contact in Outlook, Outlook automatically “recognizes”,
underlines, and places (SLX) after the name.
• Attach documents from the SalesLogix Library to an Outlook message.
• Send a SalesLogix contact’s information in vCard file format via e-mail.
• Automatically add SalesLogix contact information to Outlook.
• Schedule a meeting or phone call in SalesLogix and have the activity automatically
placed on your SalesLogix and Outlook calendars.
Our scenario:
You want to send an e-mail to Tom Dale and Joan Smith of Beacon Motors to tell them that you will be out
of the office for a few days. You can use Microsoft Outlook and record the e-mail in SalesLogix.
To send an e-mail using Outlook Integration
1 In SalesLogix, open Tom Dale’s contact record.
2 On the Write menu, click E-Mail.
Outlook automatically inserts the e-mail address for the selected contact.
3 In the Subject line, type Out of Office.
4 In the Body, type I will be out of the office for a few days. I’ll contact you when I
return.
Since you are using Outlook to send this e-mail, you may want to record this to
SalesLogix History.
5 On the Toolbar, click SendSLX.
Communicating with Contacts and Accounts 33

39. Chapter 5
Managing Opportunities for Sales
Opportunities are potential sales to accounts and contacts. As an opportunity progresses,
you can track the products involved in the opportunity, days in the pipeline, competitors, level
of commitment by the prospect, and much more.
In this chapter, you will learn to:
• Add an opportunity.
• Use Opportunity Statistics.
• Close an opportunity.
Adding an Opportunity
Use the SalesLogix Opportunity Detail view to collect and analyze information related to an
opportunity. It is not necessary to complete all information when you add an opportunity. You
can add the information that is most important to your company and include more
information later. For example, when you add an opportunity, you may want to note the
probability of closing the sale, the dollar amount, and the estimated close date. Then add
information as the opportunity moves through the pipeline.
• If you do not want to add products while adding a new opportunity, you can add them
later using the Products tab in the Opportunity Detail view.
• Adding contacts to an opportunity allows you to target the individuals at the account and
designate their roles and influence in the possible sale. If you do not add contacts while
adding the new opportunity, you can add them later using the Contacts tab in the
Opportunity Detail view.
Our scenario:
There is an opportunity for a sale to Beacon Motors. You want to create a new opportunity and add
products and contacts.
To add a new opportunity
1 Open the Beacon Motors’ Account Detail view.
2 On the Toolbar, click Insert New Opportunity.
3 In the Description box, type the name of the opportunity.
To help track opportunities, use the account name in the opportunity description. For
example, type: Beacon Motors - Phase 1.
4 In the Account box, Beacon Motors appears.
If it does not appear, use Lookup to locate the account.
5 If necessary, in the Acct. Mgr. box, select the account manager.
35

40. 6 In the Sales Process box, select the sales process associated with this opportunity.
If your company does not use sales processes, this box will not appear.
7 In the Est. Close box, type or select the date you expect to close the sale.
8 In the Status box, select the opportunity status.
9 In the Type box, select New.
10 In the Source box, select how you discovered the opportunity.
11 In the Close Prob. box, select the probability of closing this opportunity.
If you selected a sales process in step 6, the probability is automatically calculated.
12 If necessary, in the Product section, click Add and add a product(s) to this opportunity.
13 To track competitors, in the Competitors section, click Add and associate any
competitors with the opportunity.
14 In the Contacts section, click Add, then select Tom Dale and Joan Smith.
15 Click OK.
If you frequently use the same settings when adding opportunities (such as the
opportunity status or type), you can set defaults to use when creating new
opportunities. See the “Setting Opportunity Defaults” topic in Help for details.
Figure 8 Opportunity Detail view for Beacon Motors
To add a new opportunity using SalesLogix over the Web
1 In the Beacon Motors’ Account Detail view, on the Toolbar, click New, and then click
Opportunity.
2 In the Description box, type Beacon Motors - Phase 1.
To help track opportunities, use the account name in the opportunity description.
36 Getting Started with SalesLogix Sales v6.2

41. 3 Verify Beacon Motors appears in the Account box.
If it does not appear, locate Beacon Motors using the Lookup.
4 In the Acct. Mgr. box, select the account manager.
5 In the Sales Process box, select the sales process associated with this opportunity.
If your company does not use sales processes, this box will not appear.
6 In the Est. Close box, type or select the date you expect to close the sale.
7 In the Status box, select the opportunity status.
8 In the Type box, select New.
9 In the Source box, select Trade Show.
10 In the Close Prob. box, select the probability of closing this opportunity
If you selected a sales process in step 5, the probability is automatically calculated.
11 In the Contacts section, click the Add button, and then select Tom Dale and Joan
Smith.
12 Click OK.
If you frequently use the same settings when adding opportunities (such as the
opportunity status, type, or probability), you can set defaults to use when creating
new opportunities. See the “Setting Opportunity Defaults” topic in Help for details.
Figure 9 Opportunity Detail view using SalesLogix over the Web
Using Opportunity Statistics
If you want to quickly see statistics for one or a group of opportunities, you can use
Opportunity Statistics. The Opportunity Statistics view displays the Sales Potential Total
dollar amount, Weighted Potential Total dollar amount, Average Close Probability and other
information. If necessary, you can export this information to Microsoft Excel.
Note Opportunity Statistics is an optional feature and may not have been purchased by
your company.
Managing Opportunities for Sales 37

42. To view Opportunity Statistics
1 In the Opportunities view, open the group of opportunities you want to view.
You can open the opportunity group using the Group button, or by selecting multiple
accounts in the Opportunity List view.
2 On the View menu, click Opportunity Statistics.
To view Opportunity Statistics in SalesLogix over the Web
1 In the Opportunities List view, open the group of opportunities you want to view.
You can open the opportunity group using the Opportunity Group list.
2 On the Toolbar, click the Show Opportunity Statistics button.
38 Getting Started with SalesLogix Sales v6.2

43. Closing an Opportunity
When an opportunity is won or lost, you should close the opportunity. If the opportunity was
not won, you should close the opportunity and enter the reason for future reference.
Note When using SalesLogix over the Web, you should close the opportunity using
SalesLogix on a network. If you do not have access to SalesLogix on a network,
have another user close the opportunity and associate the products for you.
Our scenario:
Beacon Motors has agreed to your terms and pricing. You need to close the opportunity.
To close an opportunity
1 Open the Beacon Motor’s opportunity in the Opportunity Detail view.
2 In the Status box, click the Ellipses button, select Closed - Won, and then click OK.
The Close Opportunity dialog box appears.
3 In the Actual Close box, type the date the opportunity was closed.
By default, the current date appears.
4 In the Reason Won box, select a reason the opportunity was won.
5 In the Comp. Replaced box, select the competitor that you have replaced by winning
this opportunity.
6 In the Comments box, type any additional information relating to the won opportunity.
7 Click OK.
Beacon Motors’ Opportunity Detail view appears with a Closed-Won Status and the
Probability automatically updates to 100%.
Managing Opportunities for Sales 39

45. Chapter 6
Working with Customer Service
SalesLogix Customer Service allows designated customer service users to track, qualify,
and resolve customer questions and issues in SalesLogix. You can use customer service to
add, edit, and delete tickets for an account or contact, and track the time spent resolving
issues for a ticket.
In this chapter, you will learn to:
• Add a ticket.
• Punch In and Punch Out.
• Close a ticket.
Adding a Ticket
Tickets are records of customer inquiries or complaints. They can contain the information
necessary to report, investigate, and close an inquiry or problem. Before you add a ticket,
the account and contact must exist in SalesLogix.
Our scenario:
Joan Smith at Beacon Motors called. She is having a problem with one of their modems. You need to
create a ticket to work on the problem.
To add a ticket
1 On the toolbar, click Insert New Ticket.
If you have set the option to display account service information, then the Account
Service Information dialog box displays before the new ticket can be created.
• If the Account Service Information dialog box appears, continue with Step 2.
The Account Service Information dialog box provides service information for the
account, contact, and/or contract associated with the ticket.
• If the Insert New Ticket dialog box appears, skip to Step 7.
2 In the Account box, click the Find button to locate the account.
3 In the Lookup Account dialog box, find Beacon Motors, and then click OK.
4 In the Select Contact area, click the name of the contact who is reporting the problem
associated with this ticket (Joan Smith).
5 In the Select Active Contract area, select the contract that the ticket will be associated
with.
6 Click Next.
7 In the Insert New Ticket dialog box, click the List button in the Area box.
8 In the Select Area - Category - Issue dialog box, select Hardware under Area,
Modem under Category, and then click OK.
41

46. 9 In the Source box, click the Ellipses button, and then double-click Phone.
10 In the Subject box, type a short summary of the problem.
By default, the Details area is shown in the center of the Insert New Ticket dialog box.
11 In the Description box, type detailed information for the problem.
If you need more space for the description, click the Description label lookup and use
the Description Comments dialog box for additional text.
12 To add notes about the ticket, in the Internal Only box, type additional information that
is important to the ticket.
If you need more space for comments, click the Internal Only label lookup and use the
Internal Comments dialog box for additional text.
13 If the new ticket requires an attachment, click Attach to add a file or URL to the ticket.
14 Click OK to save.
If the ticket cannot be resolved during the first phone call, you may need to reopen and work
on the ticket at a later time. When this happens, you should punch in and out of the ticket so
that SalesLogix can track the time you spent working on the problem.
To add a ticket using SalesLogix over the Web
1 Open the Beacon Motors Account Detail view.
2 On the New menu, click Ticket.
3 Verify Beacon Motors appears in the Account Name box.
4 In the Contact Name box, click the Find button, and then select Joan Smith.
5 In the Area box, select Hardware.
6 In the Category box, select Modem.
7 In the Source box, select Phone.
8 In the Status box, select In Process.
9 In the Subject box, type a short summary of the problem.
10 In the Description box, click the User Date Stamp button, and then type detailed
information for the problem.
11 To add notes about the ticket, in the Comments section, type additional information that
is important to the ticket.
12 Click Save.
If the ticket cannot be resolved during the first phone call, you may need to reopen and work
on the ticket at a later time. When this happens, you should punch in and out of the ticket so
that SalesLogix can track the time you spent working on the problem.
Punching In and Out of a Ticket
As you work on various issues, SalesLogix enables you to track the time spent assisting a
customer. Using Punch In and Punch Out allows SalesLogix to time the activities for
individual tickets.
Our scenario:
Joan Smith called with more information on her modem problem. You need to open the ticket and track
the time you spent talking to her and doing more research.
42 Getting Started with SalesLogix Sales v6.2

47. To punch in and out of a ticket
1 Open the Detail View for Joan Smith’s ticket.
2 Click Punch In.
The button text changes to Punch Out and SalesLogix begins to record time against the
ticket.
3 When you are finished working on the ticket, click Punch Out to stop tracking time.
The text on the button changes back to Punch In.
Closing a Ticket
The stage at which a ticket is closed and the person responsible for closing a ticket depend
on your company’s processes.
Our scenario:
You resolved the problem with Joan’s modem and completed all follow-up activities. Now you want to close
the ticket.
To close a ticket
1 On the Navigation Bar, right-click Ticket List, and then click Lookup Ticket.
2 In the Lookup Ticket dialog box, type the ticket number, and then click OK.
3 In the ticket’s Detail view, ensure all ticket information is complete and accurate.
4 If you did not find the resolution to this problem in a procedure or using SpeedSearch,
select the Submit for SpeedSearch check box.
5 In the Status box, click the Ellipses button, select Closed, and then click OK.
6 If there are open activities for the ticket, you will be prompted to complete the open
activities. At the prompt:
• Click Yes to display open activities which belong to you and do not have a Completed
Date. The activities display from oldest date to newest date.
• Click No to save the information and close the ticket view.
To close a ticket using SalesLogix over the Web
1 Open the Ticket Detail view of the ticket you want to close.
2 Ensure all ticket information is complete and accurate.
3 If you did not find the resolution to this problem in a procedure or using SpeedSearch,
select the Submit for SpeedSearch check box.
4 In the Status box, select Closed.
5 Click Save.
Working with Customer Service 43

49. Chapter 7
Using SalesLogix Away from the Office
Remote users have a “remote” database -- a subset of the main office database -- stored locally
on their computer. When you work outside the office, it is critical that you keep your database up
to date. SalesLogix has the tools to keep your information current with the information at the
main office.
In this chapter, you will learn how to:
• Synchronize your database with the main office database.
• Use What’s New to track changes to your local database.
• Subscribe to accounts.
Understanding Synchronization
Synchronization is an exchange of files between remote users and offices and the main office.
The following steps demonstrate the synchronization process.
• A network user makes changes directly to the main office database.
• A remote user makes changes to his remote database. Once a day the remote user
connects to the main office database to deposit files containing changes from his remote
database. While connected, the remote user receives files containing changes from the
main office database.
• Remote Office users make changes directly to the Remote Office database (as a Network
user). The Remote Office connects to the main office to drop off and retrieve files using the
same process as remote users.
• Synchronization uses the files delivered by the remote users and offices to resolve any
conflicts, apply remote user and office changes to the main office database, and then create
files detailing changes for the remote users and offices.
Synchronizing with the Main Office Database
To keep your remote database current with the main office database, it is important to
synchronize regularly. If you do not synchronize every day or every other day, the databases with
shared records (main office and remotes) soon become out of date. Frequent synchronization
also helps reduce synchronization time since a smaller number of transactions are processed.
Automatic Synchronization allows you to synchronize automatically when you first
connect to the main office, and periodically thereafter while still connected. Automatic
sync is enabled by default. To learn more, see the “SalesLogix Synchronization Client”
topic in the SalesLogix Client Help.
45

50. To synchronize with the main office database
1 On the File menu, click Synchronize.
2 On the Automatic Sync tab, select On.
3 In the Sync runs when you first connect and then every boxes, set the time interval when
you want synchronization to occur.
4 Click the Sync Options tab.
5 To synchronize using a dial-up connection, select the Connect using RAS option, and then
select your profile in the RAS Profile list.
Clear the Connect using RAS check box if your are connecting via a network connection.
6 Click Sync Now to begin the synchronization process.
7 When the synchronization is complete, click Close.
If errors occur during synchronization, contact your system administrator to resolve them.
Reviewing Synchronization Changes
After synchronizing, you can use What’s New to see the changes that were made to your
database.
To view synchronization changes using What’s New
1 On the Navigation Bar, click What’s New.
2 In the What’s New view, click one of the options at the bottom of the window.
Click To check for
New New accounts, contacts, opportunities, activities, notes, history, and documents.
Updated Accounts, contacts, opportunities, activities, notes, and history you subscribe to that
were changed by other users.
Deleted Accounts, contacts, or opportunities deleted by other users.
Understanding Conflict Resolution
Since records that reside on both the main office database and remote database can be
independently changed, conflict resolution is used to determine which changes are valid. Your
system administrator can identify up to three criteria to determine which user “wins” when a
conflict occurs. Conflicts are resolved when changes are applied to the main office database,
not your remote database.
46 Getting Started with SalesLogix Sales v6.2

51. Understanding Subscription
You can use subscription to select, or subscribe to, accounts you use on a regular basis and
want to store on your local database. Using subscription minimizes your database size and
the time required to synchronize updated information to the main office database. You and
your system administrator can establish what accounts you need to subscribe to.
• You automatically subscribe to accounts you own as an individual or as a member of a
team. You cannot unsubscribe to these accounts.
• Other SalesLogix users that are added to your security profile (by the system
administrator) can subscribe to the accounts you own as an individual or as a member
of a team.
To subscribe to an account
1 Click What’s New.
2 Click the Accounts tab.
3 Select the account you want to subscribe to, right-click, and then click Subscribe.
To unsubscribe to an account
1 From the Account Detail or Account List view, select the account you want to remove
subscription from.
2 Right-click, and then click Unsubscribe Account.
3 Click Yes to confirm that you no longer want to receive this account.
Using SalesLogix Away from the Office 47

53. Index
A Customizing SalesLogix 11
Account manager 13
Account owner 13
D
Account ownership 13 Date Stamp 8
Accounts Detail views 6, 10
adding 14 user-defined area 6
adding over the Web 16
associating 17 E
defined 13 E-mail
viewing history 29 sending with mail merge 32
viewing history over the Web 30 sending with Outlook Integration 33
Activities
completing 23 F
completing over the Web 24 Fulfilled literature requests 19
defined 19
scheduling 19 G
scheduling over the Web 19 Group Button 6
unscheduled 23 Group Options Menu 10
Activities tab 20 Groups 1
Activities view 20, 27 in List views 6, 10
Activity Manager 4
Advanced Outlook Integration 1, 19 H
scheduling meetings 24
Help 11
viewing calendar 26
History of account 29
Associating
accounts 17
accounts over the Web 17
L
Automatic synchronization 45 Library 27
accessing 28
C accessing over the Web 28
accessing remotely 27
Calendar 25
overview 1
day view 26
List View Button 9
month view 26
List views 6
week view 26
adding and removing group members 7,
year view 26
10
Changes during synchronization 46
groups 10
Closing
Literature requests 18
tickets 43
fulfilled 19
Completing activities 23, 24
overview 1
Conflict resolution 46
scheduling 18
Contacts
scheduling over the Web 18
adding 14
Literature Requests tab 19
adding over the Web 16
Logging on 3
defined 13
Lookup label 8
sending literature 18
Lookups 1
Customer Relationship Management 13
Customer service 41
49

54. M Reports view 28
Mail Merge
overview 1, 32
S
Meetings Sales support 12
inviting members 24 Scheduling follow-up activities 19
Menu Bar 5, 9 Scheduling follow-up activities over the
Microsoft Outlook 33 Web 19
Microsoft Word templates 31 Scheduling meetings 24
Shortcut menus 8
N Split views 7
Status Bar 6, 9
Name Stamp 8
Subscribing to an account 47
Navigation Bar 6, 9
Subscription 47
Navigation tips 8
Synchronization
Notes 20
conflict resolution 46
adding 20
frequency 45
adding over the Web 20
overview 45
Notes tab 21
reviewing changes 46
Notes/History tab 21
System administrator 12
O T
Opportunities
Tabs 6
adding 35
Technical support 11
adding contacts to 35
Templates
adding products to 35
creating 31
closing 39
overview 31
overview 35
Ticket
Owning accounts 13
adding 41
closing 43
P punch in and out 42
Passwords 3 tracking time 42
Phone calls Time Stamp 8
scheduling 19 Title Bar 5, 9
scheduling over the Web 19 Toolbar 5
Pick list 8 Tracking time for tickets 42
Private templates 31 Training 12
Public templates 31
Punch In/Out of tickets 42 U
Unscheduled activities 23
Q Unsubscribe to an account 47
Quick Find 6, 8
V
R Viewing activities 27
Related documentation 2
Remote access 1 W
Reports
What’s New 46
running 28
running over the Web 29
50 Getting Started with SalesLogix Sales v6.2