This document contains a digital signature from T_AgO in Brazil dated May 13, 2005. The signature validates the authenticity of the document but provides no additional context or content beyond the signature itself.
This document covers key concepts in microeconomics and macroeconomics. In microeconomics, it defines the isocost line and profit maximization conditions where marginal revenue equals marginal cost. In macroeconomics, it defines GDP components like consumption, investment, government spending, and net exports and how savings is determined. It also covers foreign exchange, inflation, GDP deflator, and national income concepts.
The document outlines a plan for Thursday, July 31st. It reminds the reader that homework is due tomorrow, there is a quiz on Monday, and they should start Chapter 8. On Wednesday they will review cost functions, long run costs, profit maximization, and cost minimization. The CEO chooses the output level and they must determine the optimal inputs of labor (L) and capital (K) to minimize costs of producing that output level given prices of inputs. Combinations of inputs in the shaded blue areas would waste money, and the optimal solution occurs where the marginal costs of the inputs are equal.
This document provides instructions for homework assignment 12 due on December 21, 2015. It involves implementing high precision arithmetic functions for adding, subtracting, multiplying and scanning high precision numbers. As an example, it shows how to add and subtract the numbers 1.0947 and 0.00248 by aligning the decimal points and then performing the operations digit-by-digit, accounting for carries and borrows. Multiplication is shown by multiplying the digits of each number individually and adding them with carries into the answer array.
This document is a report on the realization of the budget for the period ending March 31, 2020 for the Balai Pengkajian Teknologi Pertanian Sumatera Selatan. It shows that of the planned Rp168.466.000 in revenue and grants, only Rp60.880.000 or 63% was realized in the first quarter of 2020. Of the planned Rp13.144.482.000 in total spending, only Rp2.439.037.253 or 18.56% was spent in the first three months, with personnel expenses at 18.73% realization and goods spending at 19.21% realization.
This document summarizes the budget realization report for the period ending December 31, 2019 and 2018 for the Balai Pengkajian Teknologi Pertanian Sumatera Selatan.
In 2019, state revenues were Rp. 27.9 billion or 84% of the budgeted Rp. 179.5 billion. Total expenditures were Rp. 345.8 billion or 98% of the budgeted Rp. 16.2 trillion. Expenditures included Rp. 141.3 billion or 97% for personnel, Rp. 173.9 billion or 98% for goods, and Rp. 30.6 billion or 99% for capital expenditures.
In 2018,
This drawing shows the proposed north elevation for a new retail space located at 292 to 298 High Street in Slough. The drawing depicts the materials and design features planned for the building exterior, including standing seam zinc cladding, thermally broken aluminum-faced windows, cantilevered balconies with glass balustrades, and new canopies with aluminum edge trim. Notes provide information on material colors and landscaping details referenced in other project documents. The drawing is copyright protected and for planning purposes only.
This document contains a math lesson on rounding numbers and estimating answers to calculations. It includes an assignment to complete an odd-numbered problem set, instructions to use prime factorization to find the GCF and LCM of numbers and simplify fractions, examples of rounding numbers to the nearest hundred and thousand, and estimates of calculations by rounding values.
The document outlines the schemes and trades offered at an institute including the Craftsmen Training Scheme (CTS) which offers the trades of Surveyor and Electrician, the Modular Employable Skills (MES) Scheme which offers various short term skills courses, and the Commercial Vocational Scheme which offers Surveyor with Auto-cad. It provides details on the total capacity, duration and number of students admitted for each scheme and trade. Admission criteria includes order of merit based on percentage of marks obtained in qualifying examinations like Madhyamic Pariksha for the M-Group trades of Surveyor and Electrician offered at the institute.
This document covers key concepts in microeconomics and macroeconomics. In microeconomics, it defines the isocost line and profit maximization conditions where marginal revenue equals marginal cost. In macroeconomics, it defines GDP components like consumption, investment, government spending, and net exports and how savings is determined. It also covers foreign exchange, inflation, GDP deflator, and national income concepts.
The document outlines a plan for Thursday, July 31st. It reminds the reader that homework is due tomorrow, there is a quiz on Monday, and they should start Chapter 8. On Wednesday they will review cost functions, long run costs, profit maximization, and cost minimization. The CEO chooses the output level and they must determine the optimal inputs of labor (L) and capital (K) to minimize costs of producing that output level given prices of inputs. Combinations of inputs in the shaded blue areas would waste money, and the optimal solution occurs where the marginal costs of the inputs are equal.
This document provides instructions for homework assignment 12 due on December 21, 2015. It involves implementing high precision arithmetic functions for adding, subtracting, multiplying and scanning high precision numbers. As an example, it shows how to add and subtract the numbers 1.0947 and 0.00248 by aligning the decimal points and then performing the operations digit-by-digit, accounting for carries and borrows. Multiplication is shown by multiplying the digits of each number individually and adding them with carries into the answer array.
This document is a report on the realization of the budget for the period ending March 31, 2020 for the Balai Pengkajian Teknologi Pertanian Sumatera Selatan. It shows that of the planned Rp168.466.000 in revenue and grants, only Rp60.880.000 or 63% was realized in the first quarter of 2020. Of the planned Rp13.144.482.000 in total spending, only Rp2.439.037.253 or 18.56% was spent in the first three months, with personnel expenses at 18.73% realization and goods spending at 19.21% realization.
This document summarizes the budget realization report for the period ending December 31, 2019 and 2018 for the Balai Pengkajian Teknologi Pertanian Sumatera Selatan.
In 2019, state revenues were Rp. 27.9 billion or 84% of the budgeted Rp. 179.5 billion. Total expenditures were Rp. 345.8 billion or 98% of the budgeted Rp. 16.2 trillion. Expenditures included Rp. 141.3 billion or 97% for personnel, Rp. 173.9 billion or 98% for goods, and Rp. 30.6 billion or 99% for capital expenditures.
In 2018,
This drawing shows the proposed north elevation for a new retail space located at 292 to 298 High Street in Slough. The drawing depicts the materials and design features planned for the building exterior, including standing seam zinc cladding, thermally broken aluminum-faced windows, cantilevered balconies with glass balustrades, and new canopies with aluminum edge trim. Notes provide information on material colors and landscaping details referenced in other project documents. The drawing is copyright protected and for planning purposes only.
This document contains a math lesson on rounding numbers and estimating answers to calculations. It includes an assignment to complete an odd-numbered problem set, instructions to use prime factorization to find the GCF and LCM of numbers and simplify fractions, examples of rounding numbers to the nearest hundred and thousand, and estimates of calculations by rounding values.
The document outlines the schemes and trades offered at an institute including the Craftsmen Training Scheme (CTS) which offers the trades of Surveyor and Electrician, the Modular Employable Skills (MES) Scheme which offers various short term skills courses, and the Commercial Vocational Scheme which offers Surveyor with Auto-cad. It provides details on the total capacity, duration and number of students admitted for each scheme and trade. Admission criteria includes order of merit based on percentage of marks obtained in qualifying examinations like Madhyamic Pariksha for the M-Group trades of Surveyor and Electrician offered at the institute.
This document presents a series of quotes from various organizations throughout history complaining about students' dependence on new technologies for writing and calculating. The quotes show that as early as 1703, teachers were concerned about students relying on slates instead of preparing bark to do calculations by hand. Subsequent quotes express worries about dependence on paper, ink, store-bought ink, fountain pens, ballpoint pens, and handheld calculators. The concluding statement notes that while these technologies like pens, pencils and calculators are still used today, computers now make lives even easier, and there will always be complaints about new technologies.
The document summarizes the concept of parasitic DNA and transposable elements. It discusses how Richard Dawkins defined parasitism as one set of DNA replicating with the help of another set of DNA. It then provides examples of transposable elements like transposons and retrotransposons that can move around in genomes. The document argues that transposable elements have contributed to the evolution of sex in organisms as a way to minimize their deleterious effects, and that they may have played a role in the initial evolution of sexual reproduction itself.
Setting up a newsletter using MailchimpBrand by Name
How you can create an email newsletter using MailChimp. We’ll also go through the steps to add a sign-up form to your website, and how to customise the signup process. Although there are a number of different services you could choose, Mailchimp is one of the easiest to use and has a free entry-level plan.
Floating Design Netherlands is an engineering firm that specializes in floating structure design and build services including floating breakwaters, jetties, and bridges. They cite advantages such as minimal environmental impact, movability, and cost-effectiveness. The company, based in Amsterdam, provides contact information including their address, phone number, fax, website, and email.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
The strengths, weaknesses, opportunities, and threats (SWOT) analysis methodology is one of the most popular tools among strategy professionals for examining and understanding the competitive positioning of their respective solution, organization, or company. Applied correctly, a SWOT analysis can help organizations identify and carve out significant and sustainable market opportunities — and identify and proactively avoid potential market disasters.
However, because of the relative simplicity of the base SWOT framework, strategy executives do not always get the desired value from their investment. Corporate Strategies Group has seen and reviewed many SWOT approaches, structures, and their results and has identified common mistakes to avoid — as well as practical and structural improvements that strategy professionals can use to make their SWOT analysis more robust and revealing.
We provide the off-site availability of quality wood products for residential and commercial construction projects.
Our products include:
• Door / Window Frames & Shutters
• Wardrobe Frames & Shutters
• Architraves and Skirting
• Hardwood Flooring
• Cabinetry
• Staircases
• Pergolas
• Balconies
• Home Products
This document lists the components and prices for a computer build. It includes a 600W power supply for $348, an AMD/Intel cooler for $471, an Intel i7 2600k 3.4GHz CPU for $4,949, an Intel motherboard for $2,500, 4GB of RAM for $900, an 80GB Intel SSD for $2,970, a 2TB hard drive for $2,650, a 1GB GeForce graphics card for $1,999, a Blu-Ray drive for $1,289, a wireless keyboard and mouse for $299, a case for $499, and Windows 7 for $3,600, for a total of $22,474.
Switching On the Growth Engine in Your Small Consulting PracticeGYK Antler
This presentation is from the Zintro Webinar Series: Marketing Tips for Consultants.
Our presenter is Brian Gladstein, CEO and Founder of Explorics, a unique marketing firm that helps B2B companies engage enthusiastic customers through loyalty and advocacy programs. He is a serial entrepreneur, co-chairs Boston’s Lean Startup Challenge, and also serves as a go-to-market coach for growth-stage companies. Brian is an MIT graduate with an MBA from Stanford.
We hope this personal story of how Explorics created a growth engine for its business will help other consulting firms and entrepreneurs approach their own businesses in interesting ways.
"Fifteen months ago, my marketing consulting practice was at a crossroads,” explains Brian. “No matter what we did – we couldn’t seem to scale the way we wanted to without client projects suffering – we were stuck. In this webinar, we will discuss how we systematically took apart our business and rebuilt it from the ground up into an engine for growth. Today, we are at the center of one of the most exciting transformations happening in the B2B Marketing and PR space, and business is booming."
Key takeaways in this presentation:
- The importance of focus
- Work on the business, not in the business
- Choose clients based on how they fit with your desired income stream
- Building mechanisms that transfer trust to your staff
- Design every project to run without you
- Train your staff to solve problems without you
Be sure to check out http://explorics.com/aa to take an Advocate Assessment for your company - this is a custom-built roadmap for measuring and increasing organic advocacy.
Wiring lesson Open Education resourcesvigyanashram
This document provides an overview of an Open Educational Resource (OER) on the topic of rural technology and energy and environment. Specifically, it focuses on the concept of wiring. The OER contains three levels - for learners, mentors, and evaluators. It utilizes multimedia like videos and presentations to cover key wiring concepts over three lessons, including basic electricity, circuits, Ohm's Law, and different circuit types. Hands-on activities reinforce the content. The intended audience is students following a prescribed syllabus on wiring.
Open Channel Flow: fluid flow with a free surfaceIndrajeet sahu
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
This document presents a series of quotes from various organizations throughout history complaining about students' dependence on new technologies for writing and calculating. The quotes show that as early as 1703, teachers were concerned about students relying on slates instead of preparing bark to do calculations by hand. Subsequent quotes express worries about dependence on paper, ink, store-bought ink, fountain pens, ballpoint pens, and handheld calculators. The concluding statement notes that while these technologies like pens, pencils and calculators are still used today, computers now make lives even easier, and there will always be complaints about new technologies.
The document summarizes the concept of parasitic DNA and transposable elements. It discusses how Richard Dawkins defined parasitism as one set of DNA replicating with the help of another set of DNA. It then provides examples of transposable elements like transposons and retrotransposons that can move around in genomes. The document argues that transposable elements have contributed to the evolution of sex in organisms as a way to minimize their deleterious effects, and that they may have played a role in the initial evolution of sexual reproduction itself.
Setting up a newsletter using MailchimpBrand by Name
How you can create an email newsletter using MailChimp. We’ll also go through the steps to add a sign-up form to your website, and how to customise the signup process. Although there are a number of different services you could choose, Mailchimp is one of the easiest to use and has a free entry-level plan.
Floating Design Netherlands is an engineering firm that specializes in floating structure design and build services including floating breakwaters, jetties, and bridges. They cite advantages such as minimal environmental impact, movability, and cost-effectiveness. The company, based in Amsterdam, provides contact information including their address, phone number, fax, website, and email.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
The strengths, weaknesses, opportunities, and threats (SWOT) analysis methodology is one of the most popular tools among strategy professionals for examining and understanding the competitive positioning of their respective solution, organization, or company. Applied correctly, a SWOT analysis can help organizations identify and carve out significant and sustainable market opportunities — and identify and proactively avoid potential market disasters.
However, because of the relative simplicity of the base SWOT framework, strategy executives do not always get the desired value from their investment. Corporate Strategies Group has seen and reviewed many SWOT approaches, structures, and their results and has identified common mistakes to avoid — as well as practical and structural improvements that strategy professionals can use to make their SWOT analysis more robust and revealing.
We provide the off-site availability of quality wood products for residential and commercial construction projects.
Our products include:
• Door / Window Frames & Shutters
• Wardrobe Frames & Shutters
• Architraves and Skirting
• Hardwood Flooring
• Cabinetry
• Staircases
• Pergolas
• Balconies
• Home Products
This document lists the components and prices for a computer build. It includes a 600W power supply for $348, an AMD/Intel cooler for $471, an Intel i7 2600k 3.4GHz CPU for $4,949, an Intel motherboard for $2,500, 4GB of RAM for $900, an 80GB Intel SSD for $2,970, a 2TB hard drive for $2,650, a 1GB GeForce graphics card for $1,999, a Blu-Ray drive for $1,289, a wireless keyboard and mouse for $299, a case for $499, and Windows 7 for $3,600, for a total of $22,474.
Switching On the Growth Engine in Your Small Consulting PracticeGYK Antler
This presentation is from the Zintro Webinar Series: Marketing Tips for Consultants.
Our presenter is Brian Gladstein, CEO and Founder of Explorics, a unique marketing firm that helps B2B companies engage enthusiastic customers through loyalty and advocacy programs. He is a serial entrepreneur, co-chairs Boston’s Lean Startup Challenge, and also serves as a go-to-market coach for growth-stage companies. Brian is an MIT graduate with an MBA from Stanford.
We hope this personal story of how Explorics created a growth engine for its business will help other consulting firms and entrepreneurs approach their own businesses in interesting ways.
"Fifteen months ago, my marketing consulting practice was at a crossroads,” explains Brian. “No matter what we did – we couldn’t seem to scale the way we wanted to without client projects suffering – we were stuck. In this webinar, we will discuss how we systematically took apart our business and rebuilt it from the ground up into an engine for growth. Today, we are at the center of one of the most exciting transformations happening in the B2B Marketing and PR space, and business is booming."
Key takeaways in this presentation:
- The importance of focus
- Work on the business, not in the business
- Choose clients based on how they fit with your desired income stream
- Building mechanisms that transfer trust to your staff
- Design every project to run without you
- Train your staff to solve problems without you
Be sure to check out http://explorics.com/aa to take an Advocate Assessment for your company - this is a custom-built roadmap for measuring and increasing organic advocacy.
Wiring lesson Open Education resourcesvigyanashram
This document provides an overview of an Open Educational Resource (OER) on the topic of rural technology and energy and environment. Specifically, it focuses on the concept of wiring. The OER contains three levels - for learners, mentors, and evaluators. It utilizes multimedia like videos and presentations to cover key wiring concepts over three lessons, including basic electricity, circuits, Ohm's Law, and different circuit types. Hands-on activities reinforce the content. The intended audience is students following a prescribed syllabus on wiring.
Open Channel Flow: fluid flow with a free surfaceIndrajeet sahu
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...Transcat
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.
Mechatronics is a multidisciplinary field that refers to the skill sets needed in the contemporary, advanced automated manufacturing industry. At the intersection of mechanics, electronics, and computing, mechatronics specialists create simpler, smarter systems. Mechatronics is an essential foundation for the expected growth in automation and manufacturing.
Mechatronics deals with robotics, control systems, and electro-mechanical systems.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELijaia
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Supermarket Management System Project Report.pdfKamal Acharya
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Blood finder application project report (1).pdfKamal Acharya
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.