Gasbooster gb-ds
•
0 likes•23 views
This document provides specifications for several GB-DS type gas booster models. It lists the key specifications for each model including the pressure ratio, inlet and outlet ports, discharge rate, weight, and minimum and maximum operating pressures. It also provides a diagram of the main components of the gas booster, which includes an air driven section, inlet, outlet, poppet valve, high pressure cylinder, and silencer. The document notes that product specifications may vary depending on usage and lists some important variables that affect the gas booster's performance when increasing pressure, such as driven air pressure and flow rate.
Report
Share
Report
Share
Download to read offline
Recommended
KITCHEN_REV-FLOOR (3)
This document appears to be a kitchen design plan. It includes a scale drawing showing the layout of the kitchen with measurements and descriptions of cabinetry, appliances, and other fixtures. There are labels for a pantry, trash can, refrigerator, range, microwave, drawers, and panels. The drawing is signed by the owner acknowledging any changes will result in additional charges.
Fabrication drawings
The document is a bill of materials listing various parts, their quantities, descriptions, lengths, weights, and total weights. It includes items like purlins, girts, plates, angles, and fasteners to be used in constructing a rigid frame structure. The total weight of all items is listed as 2516.64 pounds.
VALVES
The document lists various types of valves including straight through valves, drain valves, angle valves, vent valves, bottom outlet valves, and vent/vacuum valves. It provides the catalog reference, pipe size dimensions, and key specifications for each valve type.
Schunk esova e porta escova2
The document provides instructions to click on either a manufacturer's name or a page name to go directly to a requested page. It then lists various product codes, models and part numbers, including R103, R106/0, R132, R133, J30, J31, J32, J42, JS37, F5T, F6 and F6S, PS147, 2.68.0229, SE106A, SE106B, SE95A, SE95B, XSE142P, SE148A, SE148B, 2.68.0339, SE149A, and SE151A.
AFX 8010 AXIAL - Flow combine parts catalog
The document provides parts listings and descriptions for various components of an AFX8010 axial-flow combine, including:
1. Belts, chains, and related parts for the right and left sides of the combine.
2. Hydraulic tubes for the tow/park system.
3. Filters and the main stack valve, including filter elements, fittings, tubes, and related parts.
Stock list of engine parts yanmar6 hal
This document lists stock engine parts available for a Yanmar 6 HAL engine, including plungers, main bearings, crankshaft bearings, fuel pipes, exhaust valves, intake valves, valve guides, exhaust gaskets, valve springs, gudgeon pins, crankshaft bushes, valve caps, piston rings, guide seals, crankshaft bolts, delivery valves, and injectors. It also notes the supplier can source additional Yanmar 6 HAL parts as needed and provides their website for further details.
Jet engine systems
The General Electric J85 is a single-shaft turbojet engine from the 1950s originally developed for the T-38 Jet Trainer. It has an 8-stage axial compressor powered by a 2-stage axial turbine, producing 2680 lbs of thrust. The J85 has various sections including a front frame, compressor casing and rotor, main frame, shaft, combustion section, turbine section, diffuser section, and exhaust section. It was later developed into the CF700 and used in other aircraft like the F-5 Tiger II and A-37.
CASE 2366 IH Axial - flow combine parts catalog
This document provides a list of parts for the radiator, cooling system, and deaeration system for a Case IH 2366 Axial-Flow Combine from 1998 to 2004. It includes 14 different hoses, belts, and chains as well as radiator components like tanks, fittings, and seals. The deaeration system assembly includes a tank, sensor, caps, and supports that are mounted with bolts, nuts, and clamps.
Recommended
KITCHEN_REV-FLOOR (3)
This document appears to be a kitchen design plan. It includes a scale drawing showing the layout of the kitchen with measurements and descriptions of cabinetry, appliances, and other fixtures. There are labels for a pantry, trash can, refrigerator, range, microwave, drawers, and panels. The drawing is signed by the owner acknowledging any changes will result in additional charges.
Fabrication drawings
The document is a bill of materials listing various parts, their quantities, descriptions, lengths, weights, and total weights. It includes items like purlins, girts, plates, angles, and fasteners to be used in constructing a rigid frame structure. The total weight of all items is listed as 2516.64 pounds.
VALVES
The document lists various types of valves including straight through valves, drain valves, angle valves, vent valves, bottom outlet valves, and vent/vacuum valves. It provides the catalog reference, pipe size dimensions, and key specifications for each valve type.
Schunk esova e porta escova2
The document provides instructions to click on either a manufacturer's name or a page name to go directly to a requested page. It then lists various product codes, models and part numbers, including R103, R106/0, R132, R133, J30, J31, J32, J42, JS37, F5T, F6 and F6S, PS147, 2.68.0229, SE106A, SE106B, SE95A, SE95B, XSE142P, SE148A, SE148B, 2.68.0339, SE149A, and SE151A.
AFX 8010 AXIAL - Flow combine parts catalog
The document provides parts listings and descriptions for various components of an AFX8010 axial-flow combine, including:
1. Belts, chains, and related parts for the right and left sides of the combine.
2. Hydraulic tubes for the tow/park system.
3. Filters and the main stack valve, including filter elements, fittings, tubes, and related parts.
Stock list of engine parts yanmar6 hal
This document lists stock engine parts available for a Yanmar 6 HAL engine, including plungers, main bearings, crankshaft bearings, fuel pipes, exhaust valves, intake valves, valve guides, exhaust gaskets, valve springs, gudgeon pins, crankshaft bushes, valve caps, piston rings, guide seals, crankshaft bolts, delivery valves, and injectors. It also notes the supplier can source additional Yanmar 6 HAL parts as needed and provides their website for further details.
Jet engine systems
The General Electric J85 is a single-shaft turbojet engine from the 1950s originally developed for the T-38 Jet Trainer. It has an 8-stage axial compressor powered by a 2-stage axial turbine, producing 2680 lbs of thrust. The J85 has various sections including a front frame, compressor casing and rotor, main frame, shaft, combustion section, turbine section, diffuser section, and exhaust section. It was later developed into the CF700 and used in other aircraft like the F-5 Tiger II and A-37.
CASE 2366 IH Axial - flow combine parts catalog
This document provides a list of parts for the radiator, cooling system, and deaeration system for a Case IH 2366 Axial-Flow Combine from 1998 to 2004. It includes 14 different hoses, belts, and chains as well as radiator components like tanks, fittings, and seals. The deaeration system assembly includes a tank, sensor, caps, and supports that are mounted with bolts, nuts, and clamps.
Gasbooster gb-dd
This document contains specifications for several gas booster models: GB-DD-14, GB-DD-28, GB-DD-60, and GB-DD-100. It lists key parameters for each model including maximum pressure, inlet pressure, port sizes, discharge rate, weight, pressure ratio, and operating pressure ranges. It also provides a theoretical charging time formula and notes several variables that impact pressure increase under high pressure conditions.
Gasbooster gb-sd
This document provides specifications for GB-SD series gas boosters. It lists three models - GB-SD-60, GB-SD-100, and GB-SD-160 along with their key specifications like maximum pressure, inlet and outlet ports, discharge rate, weight, and pressure ratio. The document also contains a performance graph and formulas for theoretical charging time while noting variables that can impact high pressure performance.
Gasbooster gb-ss
This document provides specifications for a single-stage, air-driven gas booster. It includes details on the type, maximum pressure, inlet/outlet ports, discharge rate, weight, and precautions for different gas booster models. A theoretical charging time formula and graph are also presented to explain the relationship between inlet air pressure, compression ratio, and outlet gas pressure for the GB-SS series gas boosters.
2018 pumster english catalog
The leading manufacturer in High pressure pump
- The specialized company in Air Gas Booster, Air Liquid pump, metering pump, the pressure testing machine, etc.
Nvd 805 check valve
This document provides specifications for the Danfoss NVD 805 non-return valve. It is available in sizes from DN50 to DN600, with Kv values ranging from 39.4 to 11269 m3/h. It features a double plate closing system with a return spring and metal-elastomer sealing. It is designed for horizontal or vertical installation in pumping, water supply, and general industrial applications handling water or glycol mixtures up to 50% and temperatures from 10 to 100°C.
Rig Spares Inventory
This document contains a list of various part numbers and corresponding quantities of items. There are over 200 part numbers listed from various brands such as Parker, Grainger, Dixon, Eaton, and others. The parts include hydraulic hose fittings, heater elements, face shield frames and visors, filters, and other industrial equipment components. Next to some part numbers are additional details like specifications, product descriptions, or remarks. The document appears to be an inventory or stock list of maintenance, repair, and operations (MRO) parts.
Butterfly valve vfy wh-lh
This document provides specifications for butterfly valves with hand levers. It describes the main features as having a one-piece shaft connected to a spherically machined disc for high torque transmission. It offers sizes from DN 25 to DN 300 with pressure ratings up to PN 16 and medium temperatures from -10 to 120 degrees Celsius. Dimensional drawings and specifications are provided for wafer and lug type valves.
yuken gear pump Pg1 catalogue
This document provides information on the PG1-Series gear pumps from JSD Engineering Products, including:
- The pumps use an aluminum extruded body, hardened and ground integral gear shaft, and special aluminum alloy bush bearings.
- They are available in various sizes with maximum flow rates ranging from 10.0 LPM to 40.0 LPM.
- Dimensions and specifications for the SAE flange mounting, BSPF ports, and nitrile or viton seals are provided.
- An exploded view diagram labels the main pump components.
Butterfly gearbox vfy wg-lg
This document provides specifications for butterfly valves with gear boxes from Danfoss. It includes details on features such as spherically machined discs for high torque transmission. The valves are available in sizes from DN 50 to 350 with pressure ratings up to PN 16. They can handle circulation water, drinking water, or glycol mixtures at temperatures from -10 to 120 degrees C. Dimensions, flow rates, pressure drops, materials, and ordering information are provided for wafer and lug connection types. Replacement parts are also listed.
Gemel valves itally dealers vardhman bearings
we at vardhman bearings are dealers for GEMEL itally valves in india , we stock and trader in all type of GEMEL valves , we stock series like SBF valves gemel valves .. sbt 2 way high pressure ball valve , GM high pressure ball valve , GN high pressure ball valve , GM1 high pressure ball valve gemel valve
Kf ball-floating flangedseriesf-fe
This document provides information on KF Series F/FE flanged floating ball valves, including:
- The valves feature a unibody or two-piece bolted design and include anti-blowout stem, weather seal, actuator mounting pad, and other features.
- It lists the component parts for various valve classes and sizes.
- Dimensional data and specifications for the valves are also included.
Pipe line Component & Valves
This document discusses components and valves used in pipelines for chemical and pharmaceutical industries. It describes the advantages of using borosilicate glass for these components, including resistance to corrosion and chemicals, transparency for monitoring processes, and suitability for vacuum use. It then provides specifications for various pipe sections, fittings, valves, bends, and crosses made of borosilicate glass and PTFE. Dimensions and part numbers are listed for each item.
Beisit electric - cable gland
This document provides a product catalog for Cable Glands from BEISIT Electric Co. ltd. It includes the company address and contact information. The catalog then lists over 50 different types and sizes of cable glands, including PG, M, NPT, MG, and G types in nylon or metal with varying thread sizes and lengths. For each item, it provides the item number, dimensions, material specifications, temperature ratings and other technical details. It aims to provide all relevant information for customers to learn about and purchase BEISIT's cable gland products.
Burkert Servo Solenoid Valve - นิวเมติก.com
This document provides information on a 2/2-way solenoid valve with a servo-diaphragm. The valve comes in various port sizes from G 1/2 to G 2 1/2 with material options of brass or grey cast iron. It can be used with liquids or gases up to 16 bar and temperatures ranging from -10 to +90°C depending on the seal material. Electrical connection is via a cable plug according to DIN EN 175301-803 Form A. Dimensions and part numbers for different configurations are provided.
Mb
This document provides information on the OBL MB series of mechanical diaphragm metering pumps. It describes the pumps' key features such as their compact, robust design incorporating a stress-proof diaphragm for leak-free operation. Tables list the technical specifications and dimensions for different pump models, including flow rates, motor types, materials of construction, and connection options.
SISTEMA ELECTRICOS E HIDROSTÁTICOS DE TRACTORES CATERPILLAR D5K
This document provides a schematic and component list for the hydraulic system on Caterpillar D3G, D4G, and D5G track-type tractors. The schematic shows the hydraulic circuits and components including pumps, valves, filters, cylinders and hoses. A table lists 44 hydraulic system components with part numbers and locations on the machine.
Strainers fvf
The FVF strainer is designed for heating, district heating and cooling systems to remove foreign particles from liquids. It comes in sizes from 15-300mm and can withstand temperatures from -10 to 300°C. The strainer body is made of cast iron or ductile iron depending on pressure rating and includes a removable screen to catch particles. It can also include accessories like a magnetic insert, ball valve, or different screen mesh sizes.
Ball valve with pne actuator
This document provides information on ISO 5211 pneumatic rotary actuator operated investment casting ball valves. It summarizes that the valves are available in sizes from 1/2" to 14" with various end connection options. The valves use rack and pinion actuators that can be double acting or spring return single acting. Technical specifications are provided for the valve body materials, ball and stem materials, seat packings, and testing pressures for the actuators and valves. Dimensions and weights are listed for each valve size.
Bomba Dosadora Milroyal C
Bomba Dosadora Milroyal C
SAIBA MAIS
Site: www.vibropac.com.br
Tel: +55 11 2108-5600
E-mail: vibropac@vibropac.com.br
Pressure Regulating Valve - Type G-4 Cash Valve
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6”
Suitable for use on steam heating lines, dryers, ovens, oil heaters, molding machines, steam jacketed equipment, sterilizers, large capacity kilns, retorts, heat exchangers, paper and board machines, cookers and any other steam, air and gaseous application.
2019 Tester system brochure(KR)
2019 PUMSTER tester system brochure
You can check the various pressure testing facilities of the pump.
2019 pumster cataolg(en)
You can check the specifications and specifications of our products in the 2019 catalog of pumps, and this renewed catalog shows more information than before with the addition of special gas boosters, bolt tensioners, pressure test facilities, and product applications.
More Related Content
Similar to Gasbooster gb-ds
Gasbooster gb-dd
This document contains specifications for several gas booster models: GB-DD-14, GB-DD-28, GB-DD-60, and GB-DD-100. It lists key parameters for each model including maximum pressure, inlet pressure, port sizes, discharge rate, weight, pressure ratio, and operating pressure ranges. It also provides a theoretical charging time formula and notes several variables that impact pressure increase under high pressure conditions.
Gasbooster gb-sd
This document provides specifications for GB-SD series gas boosters. It lists three models - GB-SD-60, GB-SD-100, and GB-SD-160 along with their key specifications like maximum pressure, inlet and outlet ports, discharge rate, weight, and pressure ratio. The document also contains a performance graph and formulas for theoretical charging time while noting variables that can impact high pressure performance.
Gasbooster gb-ss
This document provides specifications for a single-stage, air-driven gas booster. It includes details on the type, maximum pressure, inlet/outlet ports, discharge rate, weight, and precautions for different gas booster models. A theoretical charging time formula and graph are also presented to explain the relationship between inlet air pressure, compression ratio, and outlet gas pressure for the GB-SS series gas boosters.
2018 pumster english catalog
The leading manufacturer in High pressure pump
- The specialized company in Air Gas Booster, Air Liquid pump, metering pump, the pressure testing machine, etc.
Nvd 805 check valve
This document provides specifications for the Danfoss NVD 805 non-return valve. It is available in sizes from DN50 to DN600, with Kv values ranging from 39.4 to 11269 m3/h. It features a double plate closing system with a return spring and metal-elastomer sealing. It is designed for horizontal or vertical installation in pumping, water supply, and general industrial applications handling water or glycol mixtures up to 50% and temperatures from 10 to 100°C.
Rig Spares Inventory
This document contains a list of various part numbers and corresponding quantities of items. There are over 200 part numbers listed from various brands such as Parker, Grainger, Dixon, Eaton, and others. The parts include hydraulic hose fittings, heater elements, face shield frames and visors, filters, and other industrial equipment components. Next to some part numbers are additional details like specifications, product descriptions, or remarks. The document appears to be an inventory or stock list of maintenance, repair, and operations (MRO) parts.
Butterfly valve vfy wh-lh
This document provides specifications for butterfly valves with hand levers. It describes the main features as having a one-piece shaft connected to a spherically machined disc for high torque transmission. It offers sizes from DN 25 to DN 300 with pressure ratings up to PN 16 and medium temperatures from -10 to 120 degrees Celsius. Dimensional drawings and specifications are provided for wafer and lug type valves.
yuken gear pump Pg1 catalogue
This document provides information on the PG1-Series gear pumps from JSD Engineering Products, including:
- The pumps use an aluminum extruded body, hardened and ground integral gear shaft, and special aluminum alloy bush bearings.
- They are available in various sizes with maximum flow rates ranging from 10.0 LPM to 40.0 LPM.
- Dimensions and specifications for the SAE flange mounting, BSPF ports, and nitrile or viton seals are provided.
- An exploded view diagram labels the main pump components.
Butterfly gearbox vfy wg-lg
This document provides specifications for butterfly valves with gear boxes from Danfoss. It includes details on features such as spherically machined discs for high torque transmission. The valves are available in sizes from DN 50 to 350 with pressure ratings up to PN 16. They can handle circulation water, drinking water, or glycol mixtures at temperatures from -10 to 120 degrees C. Dimensions, flow rates, pressure drops, materials, and ordering information are provided for wafer and lug connection types. Replacement parts are also listed.
Gemel valves itally dealers vardhman bearings
we at vardhman bearings are dealers for GEMEL itally valves in india , we stock and trader in all type of GEMEL valves , we stock series like SBF valves gemel valves .. sbt 2 way high pressure ball valve , GM high pressure ball valve , GN high pressure ball valve , GM1 high pressure ball valve gemel valve
Kf ball-floating flangedseriesf-fe
This document provides information on KF Series F/FE flanged floating ball valves, including:
- The valves feature a unibody or two-piece bolted design and include anti-blowout stem, weather seal, actuator mounting pad, and other features.
- It lists the component parts for various valve classes and sizes.
- Dimensional data and specifications for the valves are also included.
Pipe line Component & Valves
This document discusses components and valves used in pipelines for chemical and pharmaceutical industries. It describes the advantages of using borosilicate glass for these components, including resistance to corrosion and chemicals, transparency for monitoring processes, and suitability for vacuum use. It then provides specifications for various pipe sections, fittings, valves, bends, and crosses made of borosilicate glass and PTFE. Dimensions and part numbers are listed for each item.
Beisit electric - cable gland
This document provides a product catalog for Cable Glands from BEISIT Electric Co. ltd. It includes the company address and contact information. The catalog then lists over 50 different types and sizes of cable glands, including PG, M, NPT, MG, and G types in nylon or metal with varying thread sizes and lengths. For each item, it provides the item number, dimensions, material specifications, temperature ratings and other technical details. It aims to provide all relevant information for customers to learn about and purchase BEISIT's cable gland products.
Burkert Servo Solenoid Valve - นิวเมติก.com
This document provides information on a 2/2-way solenoid valve with a servo-diaphragm. The valve comes in various port sizes from G 1/2 to G 2 1/2 with material options of brass or grey cast iron. It can be used with liquids or gases up to 16 bar and temperatures ranging from -10 to +90°C depending on the seal material. Electrical connection is via a cable plug according to DIN EN 175301-803 Form A. Dimensions and part numbers for different configurations are provided.
Mb
This document provides information on the OBL MB series of mechanical diaphragm metering pumps. It describes the pumps' key features such as their compact, robust design incorporating a stress-proof diaphragm for leak-free operation. Tables list the technical specifications and dimensions for different pump models, including flow rates, motor types, materials of construction, and connection options.
SISTEMA ELECTRICOS E HIDROSTÁTICOS DE TRACTORES CATERPILLAR D5K
This document provides a schematic and component list for the hydraulic system on Caterpillar D3G, D4G, and D5G track-type tractors. The schematic shows the hydraulic circuits and components including pumps, valves, filters, cylinders and hoses. A table lists 44 hydraulic system components with part numbers and locations on the machine.
Strainers fvf
The FVF strainer is designed for heating, district heating and cooling systems to remove foreign particles from liquids. It comes in sizes from 15-300mm and can withstand temperatures from -10 to 300°C. The strainer body is made of cast iron or ductile iron depending on pressure rating and includes a removable screen to catch particles. It can also include accessories like a magnetic insert, ball valve, or different screen mesh sizes.
Ball valve with pne actuator
This document provides information on ISO 5211 pneumatic rotary actuator operated investment casting ball valves. It summarizes that the valves are available in sizes from 1/2" to 14" with various end connection options. The valves use rack and pinion actuators that can be double acting or spring return single acting. Technical specifications are provided for the valve body materials, ball and stem materials, seat packings, and testing pressures for the actuators and valves. Dimensions and weights are listed for each valve size.
Bomba Dosadora Milroyal C
Bomba Dosadora Milroyal C
SAIBA MAIS
Site: www.vibropac.com.br
Tel: +55 11 2108-5600
E-mail: vibropac@vibropac.com.br
Pressure Regulating Valve - Type G-4 Cash Valve
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6”
Suitable for use on steam heating lines, dryers, ovens, oil heaters, molding machines, steam jacketed equipment, sterilizers, large capacity kilns, retorts, heat exchangers, paper and board machines, cookers and any other steam, air and gaseous application.
Similar to Gasbooster gb-ds (20)
SISTEMA ELECTRICOS E HIDROSTÁTICOS DE TRACTORES CATERPILLAR D5K
SISTEMA ELECTRICOS E HIDROSTÁTICOS DE TRACTORES CATERPILLAR D5K
More from pumster
2019 Tester system brochure(KR)
2019 PUMSTER tester system brochure
You can check the various pressure testing facilities of the pump.
2019 pumster cataolg(en)
You can check the specifications and specifications of our products in the 2019 catalog of pumps, and this renewed catalog shows more information than before with the addition of special gas boosters, bolt tensioners, pressure test facilities, and product applications.
2019 pumster catalog(kr)
2019 PUMSTER product catalog
■ PRODUCT
gas boosters / liquid pumps / metering pumps / tester system
■ WEBSITE
www.pumster.com
■ WEBSITE
www.pumster.com
2019 pumster pump-leaflet
gas booster, liquid pump, metering pump leaflet
Find out more at the site below
http://www.pumster.com/en/
2019 pressure testing machines
Pumster Packaged systems are suitable for pressurizing or maintaining the pressure various industry fields. It is the customer oriented product for testing such as sealing, leaking, repeating, fatigue, external and internal pressure depending on users’ purpose.
http://www.pumster.com/en/tester_system.html
2019 pumster catalog
In 2019 catalog, added pressure testing equipment.
For more information, please visit our webpage
http://www.pumster.com/en
2018pumster company introduction
Pumster Company introduction 2018
We are a leading company in high pressure equipment.
Pumster creats the best profit with transparent management and innovative technology.
http://www.pumster.com/en/
Liquidpump lst
pumspter-Liquidpump lst
Specification by pressure ratio
It is divided into 1 specifications
by pressure ratio following by Pascal's law.
( Pressure Ratio 1 : 1050 )
Liquidpump lss
pumster-Liquidpump
Specification by pressure ratio
It is divided into 5 specifications
by pressure ratio following by Pascal's law.
( Pressure Ratio 1 : 50 / 80 / 150 / 220 / 350 )
More from pumster (10)
Recently uploaded
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Recently uploaded (20)
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Gasbooster gb-ds
- 1. Type : GB-DS type Pl – Air driven Inlet Pa – Inlet Pb – Outlet Part name Driven section Flange Poppet valve High pressure cylinder Silencer Check valve Spool valve 7 Double stage & Single driven Specification GB-DS-7 1 : 7 5 7 49 4 1/2“PT 1/2“PT 3180 19 19 GB-DS-14 1 : 14 5 7 98 7 1/2“PT 1/2“PT 4230 20 GB-DS-30 1 : 30 5 7 210 14 9/16“18UNF 9/16“18UNF 2470 21 GB-DS-50 1 : 50 5 7 350 21 9/16“18UNF 9/16“18UNF 1130 21 GB-DS-75 1 : 75 5 7 525 35 9/16“18UNF 9/16“18UNF 1300 DS series GB-DSseries 1 2 3 4 5 6 7220 Ø150 283 626 220 175 200 50100 PA PB Pa Pl Pb Gas booster Gas booster ① ② ③ ④ ⑤ ⑥ ⑦ *Product specification below is standard information and it may different depending on usage. Model Max. pressure (kg/㎠) Inlet pressure (kg/㎠) inlet Port (inch) Outlet Port (inch) Discharge rate (nl/min) Weight (kg) Pressure Ratio Min. Operating Pressure (kg/㎠) Max. Operating Pressure (kg/㎠) Performance Graph Reservoir tank x atm = TAL TAL X Flow rate/sec=Sec * Outlet pressure (Pb) = I·PI (Outlet Pressure = Compression ratio · Air drive) · Lots of variables when increasing pressure under high pressure · Driven part – driven air pressure, flow rate · High pressure part – inflow air pressure, feed rate · Charging flow rate means average flow rate, which could be different on purpose. Precautions for inflow liquids pressure Theoretical charging time formula