This document provides specifications and instructions for a forming device that allows for faster, easier, and more accurate machining of soft jaws for chucks. The forming device attaches in seconds without tools, fits a range of chuck sizes from 6 to 13 inches, and machines the jaws at the same clamping pressure used to hold workpieces, improving accuracy. It reduces setup time and minimizes stock removal to make soft jaws last longer, providing a cost-effective solution.

1. Faster
Jaws can be bored in a single operation, without interference from plugs or rings.
Easier
Attaches in seconds, with no tools. Infinitely adjustable scroll fits a range of sizes.
Most Accurate
Jaws are machined at same clamping pressure used to hold part.
Cost Effective
Cuts set-up time. Minimizes stock removal so soft jaws last longer.
ADVANTAGES
SPECIFICATIONS
INSTRUCTIONS
ORDER #
6FD/3P
8-13FD/3P
CHUCK
SIZE
6
8 to 13
F O R M I N G D E V I C E
Outside Dia.
A
6.00
10.00
Inside Dia.
B
3.375
6.300
Prong Dia.
C
.500
.640
D
To 3.250
To 6.125
E
From 6.125
From 10.125
L
3.75
4.00
Weight.
In lbs.
8
17
Length of JawsOutside RangeBoring Range
Forming Device
Jaws Prongs
Scroll
C
B
A
L
Position prongs into counter
bore of soft jaws.
( see instructions below )
Mount top jaws on chuck
Machine jaws
To secure Forming
Device actuate chuck
Attach forming device by
inserting prongs into counter
bore of jaws
1
2
3
4
PAGE 29
WE SELLWE SELL
CHUCKS!CHUCKS!& CYLINDERS& CYLINDERS