Analysis of machining parameters using MQL conditionPadmalochan Nanda
In this project an investigation is done related to the role of MQL on tool wear and surface roughness in turning operation at industrial speed-feed combination
This system eliminates the need for any driver. Whenever the train arrives at the station it stops automatically. Then the door opens automatically so that the passengers can go inside the train and the door closes after a prescribed time. It counts and displays the number of passengers present in the train.
Analysis of machining parameters using MQL conditionPadmalochan Nanda
In this project an investigation is done related to the role of MQL on tool wear and surface roughness in turning operation at industrial speed-feed combination
This system eliminates the need for any driver. Whenever the train arrives at the station it stops automatically. Then the door opens automatically so that the passengers can go inside the train and the door closes after a prescribed time. It counts and displays the number of passengers present in the train.
The principle point of our task is to save time. It's exceptionally difficult to invest our energy dependably in cleaning of the white board. This project is implemented to make human work easier and can reduce the use of human power because of its potential applications.
The report puts forward a kind of mechanism design scheme; this mechanism keeps the whiteboard clean. The duster which is mounted on a wooden block moves in forward and reverse direction vertically. Duster is mounted on a chain which receives power from a shaft, on which bevel gears are mounted and a hand wheel is attached with it so that effective drive is being done.
This appertains to new and useful improvements and more particularly to an apparatus whereby whiteboards can be cleaned in an easy and convenient manner. The object of the present automatic whiteboard duster is to provide an attachment for whiteboards in the form of a power driven erasing apparatus which can be set in operation, thus eliminating the drudgery of manually cleaning blackboards.
Thesis Report on Power Saving From Two -Wheeler Bike SilencerMd Anzar Aman
I have installed a mechanism with an axial high pressure reaction
turbines including a backward curved reaction turbine (Exhaust
Fan Blade) in a single shaft with an electrical generator which will
convert the kinematic energy into mechanical work and by
mechanical work we can generate electricity, when the pressure
energy of hot gases flows
The metro rail has quickly become the ultimate urban solution for city transportation. These have been serving as lifelines in urban spaces all across the world coupling its minimal carbon efficiency with its fuel efficiency it is the ultimate solution for mass commuter problems in large cities. Transporting thousands of people while being cleaner and greener than most of the other transport, undoubtedly, resulted in megacities in the world over to rely on the metro system. Such infrastructures are vital for the cities of the country like India, which have exponentially growing population. One of the newest Indian cities to join metro rail is the City of Nizams, Hyderabad.
Cities like Hyderabad have become large cities, unfortunately, a paradoxical situation exists here. The city is the economic engine of growth, contribute more in GDP but the same city is suffering and has reduced potential because infrastructures are not really robust. The infrastructure like metro rail pushes the city to become sustainable but at the same time it comes up with many challenges.
The traffic related issues faced by the people during construction phase of metro and the impact of metro on the future development of the city has been discussed in this report. As the city’s glorious structure is now evolving into a modern marvel with a metro rail, the impact on sustainability of city has also been discussed in brief.
This report also comprises of project sequence that is site work sequencing in detail. Furthermore, planning department work at the construction site has been discussed.
Automatic liquid filling and mixing process using PLCAMIT KUMAR SINGH
In this project, a discussion about Programmable Logic Controller (PLC) application will be explained in more details and specified. This project deals with filling and mixing of different colour liquids or chemicals in bottles/ container using PLC by the application of selector switch. System is fully controlled by Bosch Rexroth IndraLogic PLC. This prototype is used in
1. Pharmaceutical Industry
2. Paint Industry
3. Food Processing Industry etc....
various nondestructive testing techniques and their inspections on aircraft s...kd11
to study various nondestructive testing techniques, related inspections - eddy current on aircraft wheel hubs of airbus a320 aircraft and ultrasonic inspections on i.a.e v2500 aero engine fan blades, suggest remedial measures.
various nondestructive testing and their application in aviation industrykaran duggal
to study various nondestructive testing techniques and their related inspections -eddy current on airbus a320 aircraft wheel hubs, ultrasonic inspections on international aero engines v2500 aeroengine fan blades, suggest remedial measures
The principle point of our task is to save time. It's exceptionally difficult to invest our energy dependably in cleaning of the white board. This project is implemented to make human work easier and can reduce the use of human power because of its potential applications.
The report puts forward a kind of mechanism design scheme; this mechanism keeps the whiteboard clean. The duster which is mounted on a wooden block moves in forward and reverse direction vertically. Duster is mounted on a chain which receives power from a shaft, on which bevel gears are mounted and a hand wheel is attached with it so that effective drive is being done.
This appertains to new and useful improvements and more particularly to an apparatus whereby whiteboards can be cleaned in an easy and convenient manner. The object of the present automatic whiteboard duster is to provide an attachment for whiteboards in the form of a power driven erasing apparatus which can be set in operation, thus eliminating the drudgery of manually cleaning blackboards.
Thesis Report on Power Saving From Two -Wheeler Bike SilencerMd Anzar Aman
I have installed a mechanism with an axial high pressure reaction
turbines including a backward curved reaction turbine (Exhaust
Fan Blade) in a single shaft with an electrical generator which will
convert the kinematic energy into mechanical work and by
mechanical work we can generate electricity, when the pressure
energy of hot gases flows
The metro rail has quickly become the ultimate urban solution for city transportation. These have been serving as lifelines in urban spaces all across the world coupling its minimal carbon efficiency with its fuel efficiency it is the ultimate solution for mass commuter problems in large cities. Transporting thousands of people while being cleaner and greener than most of the other transport, undoubtedly, resulted in megacities in the world over to rely on the metro system. Such infrastructures are vital for the cities of the country like India, which have exponentially growing population. One of the newest Indian cities to join metro rail is the City of Nizams, Hyderabad.
Cities like Hyderabad have become large cities, unfortunately, a paradoxical situation exists here. The city is the economic engine of growth, contribute more in GDP but the same city is suffering and has reduced potential because infrastructures are not really robust. The infrastructure like metro rail pushes the city to become sustainable but at the same time it comes up with many challenges.
The traffic related issues faced by the people during construction phase of metro and the impact of metro on the future development of the city has been discussed in this report. As the city’s glorious structure is now evolving into a modern marvel with a metro rail, the impact on sustainability of city has also been discussed in brief.
This report also comprises of project sequence that is site work sequencing in detail. Furthermore, planning department work at the construction site has been discussed.
Automatic liquid filling and mixing process using PLCAMIT KUMAR SINGH
In this project, a discussion about Programmable Logic Controller (PLC) application will be explained in more details and specified. This project deals with filling and mixing of different colour liquids or chemicals in bottles/ container using PLC by the application of selector switch. System is fully controlled by Bosch Rexroth IndraLogic PLC. This prototype is used in
1. Pharmaceutical Industry
2. Paint Industry
3. Food Processing Industry etc....
various nondestructive testing techniques and their inspections on aircraft s...kd11
to study various nondestructive testing techniques, related inspections - eddy current on aircraft wheel hubs of airbus a320 aircraft and ultrasonic inspections on i.a.e v2500 aero engine fan blades, suggest remedial measures.
various nondestructive testing and their application in aviation industrykaran duggal
to study various nondestructive testing techniques and their related inspections -eddy current on airbus a320 aircraft wheel hubs, ultrasonic inspections on international aero engines v2500 aeroengine fan blades, suggest remedial measures
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
1. Major Project report on
DESIGN AND FABRICATION OF PROSTHETIC
HAND USING VOICE CONTROL
Submitted in partial fulfillment of the requirement for the award of degree of
BACHELOR OF TECHNOLOGY
IN
Mechanical Engineering (Mechatronics)
By
E.S.Muneer Hussain [10261A1411]
P. Thulasi Ramudu [10261A1441]
V.Meena [10261A1460]
A. Mahesh [11265A1402]
Under the esteemed guidance of
Smt.M.Pratyusha
Assistant Professor
DEPT. OF MECHANICAL ENGINEERING (MECHATRONICS)
MAHATMA GANDHI INSTITUTE OF TECHNOLOGY
Accredited by NBA-AICTE, New Delhi.
(Affiliated to JNTU, Hyderabad)
GANDIPET, R. R. Dist. – 500075, A.P.
2. MAHATMA GANDHI INSTITUTE OF TECHNOLOGY
Accredited by NBA-AICTE, New Delhi.
(Affiliated to JNTU, Hyderabad)
GANDIPET, R. R. Dist. – 500075, A.P.
CERTIFICATE
This is to certify that this project entitled
“DESIGN AND FABRICATION OF PROSTHETIC HAND USING VOICE CONTROL”
Has been submitted by
E.S.Muneer Hussain [10261A1411]
P.Thulasi Ramudu [10261A1441]
V.Meena [10261A1460]
A.Mahesh [11265A1402]
In partial fulfillment for the awardof the degree ofbachelor oftechnologyin
mechanical engineering(Mechatronics) is the bonafide workcarriedout bythem under
our guidance.The results embodiedinthisproject have not beensubmittedto any other
Universityor Institutionfor the awardof degree.
Internal Guide: Dr.K.Sudhakar Reddy
Mrs. M. Pratyusha Head of Department
Assistant Professor
INTERNAL EXAMINER EXTERNAL EXAMINER
3. Acknowledgement
A comprehensive project report always requires goodwill, encouragement, guidance and
support of many people. We have great pleasure in expressing our indebtedness to Assistant
professor Smt.M.Pratyusha for her constant help and encouragement. We acknowledge and
express our deep sense of gratitude to her, whose able guidance, incessant and encouragement
and sound counsel were instrumental in this work.
We have great pleasure in expressing our gratitude to Dr. G. Chandra Mohan Reddy,
Principal of M.G.I.T., for his constant encouragement and motivation throughout the years.
We thank Dr. K. Sudhakar Reddy, Professor and Head of the Department, Mechanical
(Mechatronics) Engineering, for his unlisted encouragement and more over for his timely
support and guidance till the completion of our project work.
It would be impossible to refer in detail to many persons who have been consulted in
compilation of this work and elsewhere who have contributed advice assistance, equipment and
skilled services that were invaluable to the progress of the work. I did excuse for not naming
them individually.
4. INDEX
ABSTRACT 1
1. INTRODUCTION 2
1.1 Origin 2
1.2 Possible body prosthesis 2
1.3 Advancements 4
1.4 Economic aspects 6
1.5 Low cost prosthetics for children 7
1.6 Attachment to the body. 7
1.7 Prosthetic enhancement 9
1.8 Current Technologies 10
1.9 Robotic Prosthesis 12
2. MATERIALS REQUIRED 15
2.1 Aluminium 15
2.2 Mild Steel 18
3. DESIGN CONSIDERATIONS 19
3.1 Design considerations for any prosthetic part 19
3.2 Block Diagram 20
3.3 Objectives 21
3.4 Division of project 21
5. 4. COMPONENTS 23
4.1 Arduino micro controller 23
4.2 DC Motor 26
4.3 Voltage regulator LM-317T chip 28
4.4 Bluetooth module 29
4.5 L293D 32
4.6 Smart phone with Android operating system 35
4.7 Reception 36
5. WORKING 37
5.1 Description 37
5.2 Program for arduino 38
5.3 Program for Android application 42
5.4 Schematic 65
6. CONCLUSION 66
6.1 Advantages 66
6.2 Limitations 67
RESULT 68
FUTURE SCOPE 69
7. REFERENCES 70
8. APPENDIX-I. 71
9. APPENDIX-II 75
6. LIST OF TABLES
1. TRUTH TABLE 34
LIST OF FIGURES
1. PROSTHETIC FINGER 11
2. BLOCK DIAGRAM 20
3. ARDUINO MICRO CONTROLLER 24
4. DC MOTOR 27
5. WORKING OF A DC MOTOR 27
6. VOLTAGE REGULATOR 29
7. BLUETOOTH MODULE 31
8. INTERFACING BLUETOOTH WITH ARDUINO 31
9. L293D PIN DIAGRAM 34
10. ANDROID SMART PHONE 35
11. OVERVIEW OF ANDROID 35